Normal Component Of Magnetic Field Research Articles

Numerical simulation of contact surface stress distribution based on stress-magnetization effect surface

Taking the surface profile of C45 steel grinding as the research object, a two-dimensional finite element contact model of rough surface and smooth rigid surface was established by using ANSYS software, and the stress distribution characteristics and rules of contact surface were analyzed under 0–10 MPa normal load. On this basis, the force-magnetic coupling model was established by using ANSYS APDL language. Furthermore, the influence of stress under on leakage magnetic field of contact surface under different load conditions was studied. The results indicated that according to the zero-crossing point of the normal component of the leakage magnetic field or the extreme point of the tangential component, the number of stress concentrations on the contact surface and the stress level of the corresponding area can be effectively determined. This innovative approach offers valuable insights for future studies on surface contact stress distribution between components.

Research on the defect depth detection for pipeline steel with double defects using metal magnetic memory method

Metal magnetic memory testing is an effective method to detect the stress state of ferromagnetic materials, and shows great application potential in the field of defect detection of oil and gas pipelines recently. In this paper, the correlation between the normal component of residual magnetic field (RMF) and the defect depth, as well as the applied loading were investigated by tensile tests. The X70 pipeline steels were processed into specimens with double defects of six types of depths and three types of spacings. Some magnetic parameters are defined to characterize the distortion of the RMF in the defect area. The effect of defect depth and applied loading on the magnetic parameters is discussed. The RMF signals measured on the smooth side of the specimens were compared with those on the defective side. Results show that the normal parameters, obtained from the front and back of the specimens, are capable of detecting the defect depth. The slope of the linear relationship between the two increases with the increase of defect spacing. The expressions of normal magnetic parameters were derived based on the Jiles model and magnetic dipole model. The simulation results of defective side and smooth side were compared, as well as the simulation results of different defect spacing. The experimental and numerical simulation results show that the defect depth of pipeline steel can be evaluated by the characteristic parameters of the normal RMF signal under a certain stress level.

Solar Wind Current Sheets: MVA Inaccuracy and Recommended Single‐Spacecraft Methodology

AbstractWe present the analysis of 1,831 current sheets (CS) observed aboard four Cluster spacecraft in a pristine solar wind. Four‐spacecraft estimates of the CS normal and propagation velocity are compared with different single‐spacecraft estimates. The Minimum Variance Analysis (MVA) of the magnetic field is shown to be highly inaccurate in estimating the normal. The MVA normal often differs by more than 60° from the normal obtained by multi‐spacecraft timing method, likely due to ambient turbulent fluctuations. In contrast, the cross‐product of magnetic fields at the CS boundaries delivers the normal with an uncertainty of less than 15° at the confidence level of 90%. The CSs are essentially frozen into plasma flow, since their propagation velocity is consistent with local ion flow velocity within 20% at the confidence level of 90%. The single‐spacecraft methodology based on the cross‐product method and frozen‐in assumption delivers the CS thickness and current density amplitude within 20% of their actual values at the confidence level of 90%. The CSs are kinetic‐scale structures with half‐thickness λ from a few tenths to tens of local proton inertial length λp and scale‐dependent shear angle and current density amplitude, and . The classification of the CSs in terms of tangential and rotational discontinuities remains a challenge, because even the four‐spacecraft normal has too large uncertainties to reveal the actual normal magnetic field component. The presented results will be valuable for the analysis of solar wind CSs, when only single‐spacecraft measurements are available.

Magnetic Dipole Model and Experimental Analysis of Magnetic Signal Detection Based on Magnetic Memory

By assuming that the magnetic charge is evenly distributed in the defect groove, the linear magnetic dipole is integrated in the depth direction of the defect, and the numerical calculation is carried out by using MATLAB to establish a two-dimensional magnetic dipole theoretical analysis model of double-correlated defects, which is suitable for analyzing the influence of stress on magnetic signal in the magnetic memory detection of rectangular and V-shaped combined macroscopic crack defects. To explore the influence factors and change rules of magnetic memory signal. In order to verify the correctness of the model analysis results, tensile tests were carried out on Q235 steel plate with double associated defects with different morphological characteristics, and the Hp(y) value of the normal component of the leakage magnetic field on the surface of the member was measured. The results show that the model based on magnetic dipole theory can explain some experimental phenomena and rules in magnetic memory detection.

VARIATIONS IN MAGNETIC PROPERTIES PROPAGATION IN STEEL SHELL STRUCTURE CAUSED BY WELDING (PART 2)

The first stage of the research involves analyzing primary and secondary acoustic wave propagation behavior. The results of the first stage suggest that the properties of shell structures used at every stage of the experiment are distributed unevenly along the generator lines and across the width of the test pipes. In order to conduct a comparative study of properties, the authors of the research introduce the heterogeneity parameter. During the experiment, the parameter is changing locally within two orders of magnitude, even in case of test pipes in their initial state. Equal sensitivity to heterogeneities across steel products is found in its magnetic properties. As numerous studies prove, analyzing variations in magnetic properties makes it possible to detect flaws and areas of their concentration. This method can also be used to estimate the remaining service life. This is a crucial aspect to consider when assessing properties and using the findings to develop digital twins of shell structures. The authors focus on identifying acoustic and magnetic signals coming from flawed shell structures and weld joint areas in particular. For this purpose, magnetic memory method and X-ray analysis are used. It is found that both normal and tangential magnetic field components are sensitive to structural heterogeneities across a steel product. The combination of magnetic memory method and X-ray analysis make it possible to determine how typical weld joint flaws occurring during welding affect the magnetic properties. Sufficient measurements are required for statistical analysis of the findings. It is also possible to introduce further criteria in order to import metal properties correctly into the modelling program using numerical methods.

Influence of streamwise and spanwise wall magnet arrays on near-wall MHD turbulence

ABSTRACT The effect of a permanent, localised and non-uniform magnetic field on the near-wall turbulence in a fully developed channel flow is analysed through direct numerical simulations. The magnetic field distribution is obtained by an arrangement of magnets placed on the upper and lower channel walls, producing preferentially either a streamwise (i.e. in the main flow direction) or a spanwise magnetic field component. The wall shear stress is drastically reduced under the effect of the streamwise arrangement of the wall magnets wherein both streamwise and wall-normal magnetic fields are involved. The magnetic braking effect leads to an important increase of the body force. Paradoxically enough, the small-scale turbulent activity is significantly increased above the low buffer layer in this case. On the opposite, imposing a magnetic field with a predominant spanwise component reduces tremendously the population of the turbulent shear stress producing eddies by directly affecting the regeneration of the buffer layer quasi-streamwise vortices. The flow is quasi-relaminarised between the magnets in the low-buffer and viscous sublayers. The wall shear increases in a predictable and deterministic way over the magnets, wherein the wall normal magnetic field component induces electric current loops.

Magnetic Switchbacks Heat the Solar Corona

Magnetic switchbacks are short magnetic field reversals ubiquitously observed in the solar wind. The origin of switchbacks remains an important open science question, because of switchbacks’ possible role in the heating and acceleration of the solar wind. Here, we report observations of 501 robust switchbacks, using magnetic and plasma measurements from the first eight encounters by the Parker Solar Probe. More than 46% (6%) of switchbacks are rotational (tangential; TD) discontinuities (RD), defined as magnetic discontinuities with large (small) relative normal components of magnetic field and proton velocity. Magnetic reconnection in the solar atmosphere can be a source of the observed RD-type switchbacks. It is discovered that: (1) the RD-to-TD ratio exponentially decays with increasing heliocentric distance at rate 0.06 [R S −1], and (2) TD-type switchbacks contain 64% less magnetic energy than RD-type switchbacks, suggesting that RD-type switchbacks may relax into TD-type switchbacks. It is estimated that relaxing switchbacks generated via magnetic reconnection in the solar atmosphere can transfer an additional 16% of the total reconnected magnetic energy into heating and/or accelerating the solar corona, within 11.6 [R S] of the reconnection site, below the critical Alfvén surface.

Reconnection Outflow Reversal Associated with Ion-scale Magnetic Flux Ropes in the Earth's Midtail: ARTEMIS Observations and Reconstruction Results

A rare reconnection outflow reversal in the Earth's midtail observed by the two Acceleration, Reconnection, Turbulence, and Electrodynamics of the Moon's Interaction with the Sun (ARTEMIS) probes, is presented. During the event, two ion-scale magnetic flux ropes were separately observed by THC in the earthward and tailward reconnection outflows that were adjacent and accompanied, respectively, by the positive and negative normal magnetic field components to the current sheet. The two flux ropes were separated by ∼2.75 minutes and at the center of the flux ropes, the magnetic field strength was enhanced with a large core field. Comparison results of the convection and measured electric fields reveal that the ions and the magnetic fields were decoupled in the regions surrounding the two flux ropes. The two-dimensional magnetic field maps from the Grad–Shafranov reconstruction show that the diameters of the two flux ropes were similar, being ∼7.1 and ∼7.9 ion inertial lengths, but the aspect ratios of the width to the length were different, being ∼0.35 and ∼0.47. Moreover, one of the reconstructed field maps suggests that multiple x-lines may exist in the midtail reconnection and that the traveling compression region of the flux rope was seen at THB. The angle between the axial orientations of the two flux ropes was large, being ∼55°, and their axes were tilted away from the direction of the reconnection guide field, in agreement with the earlier studies of the magnetotail flux ropes.

Low-Frequency Magnetic Shielding of a Perfectly Electric Conducting Circular Disk: Approximately Analytical Formulation Considering Radius of Emitting Loop

This letter proposes an approximate analytical formulation for the shielding problem of a perfectly electric conducting disk against the low-frequency magnetic field produced by a circular current loop placed coaxially with the disk. First, this problem is related to a complementarity problem: The leakage of the magnetic field through a circular hole on a perfectly magnetic conducting plane of infinite extension. Then, for the complementarity problem, we develop the accurate analytical solution if only the distribution of the normal component of the unshielded magnetic field along the surface of the hole can be expressed as a polynomial function of radial distance. The analytical formulation is verified with finite element simulations and measured results.

Spectral Properties of the N Component of the Heliospheric Magnetic Field from IMP and ACE Observations for 1973–2020

Abstract We analyze the normal (N) component of the heliospheric magnetic field observed by the Interplanetary Monitoring Platform and the Advanced Composition Explorer spacecraft for the period 1973–2020. Parameters characterizing the frequency spectrum are calculated with a novel technique, which is based on calculating variances at incremental lags to yield the integral of a turbulence spectrum. We compare this technique with the standard second-order structure function to show their similarity in the inertial range, and use the latter to calculate correlation functions. We find that the yearly average for magnetic field magnitude and the variance attained their lowest values since spacecraft observations began for the period that includes the 2020 solar minimum, 4.2 nT and 3.3 nT2, respectively. The ratio of the magnitude of fluctuations of the N component to the field magnitude shows little variation, with an average value of 0.43 ± 0.04. The average value of the spectral index of the energy range for the whole data set is −1.0 ± 0.1, and shows some solar-cycle dependence. The average value for the inertial range is an almost constant −1.69 ± 0.04. While the break between the energy and the inertial range is difficult to determine accurately to search for a solar-cycle dependence, an indirect indication of such a dependence follows when the ratio of spectral levels in the energy and in the inertial range is calculated. The e-folding correlation length has an average value of 1.1 ± 0.3 Mkm, with a clear solar-cycle dependence.

Forward model of metal magnetic memory testing based on equivalent surface magnetic charge theory

The magnetic dipole theory has been widely and successfully used to qualitatively analyze the testing signals of metal magnetic memory (MMM) testing. However, the magnetic charge density of the existing models is always an assumed value distributed uniformly or linearly along the defect section or in a stress concentration area, as a result the existing models are unsuitable for quantitatively analyzing the metal magnetic memory signal. In this work, a new forward model of MMM testing is established by considering the influence of uneven stress on magnetic charge density distribution, discretizing the specimen into numbers of micro elements firstly, assuming that the magnetic characteristic parameters of each element are evenly distributed and the magnetic charge density changes with stress in each element which can be determined by combining the modified magneto-mechanical model and the classical theory of magnetic charges. Compared with the experimental results of hole defect and crack defect specimen, the theoretical results calculated by the proposed model prove to be in good agreement with the testing results both qualitatively and quantitatively. Consequently, the proposed model is a new theoretical and quantitative model for analyzing the experimental change rule of metal magnetic memory testing. Then, the effects of stress concentration and macroscopic defects on the distribution of magnetic field are analyzed, showing that when there is only a stress concentration in the specimen, the horizontal component is negative valley, and the normal component changes from negative to positive valley peak in the stress concentration area; when there is a crack defect in the specimen, the distribution of magnetic field is just opposite to that when there is only a stress concentration. The distribution characteristics of the magnetic field can be used to judge the damage type in the specimen. Moreover, taking crack defect for example, the horizontal and normal component of magnetic field and their characteristic parameters changing with the size parameters of crack defect, such as width, length, depth and buried depth of crack defect, are analyzed in detail. The results show that the <inline-formula><tex-math id="M1">\begin{document}${W_{\Delta {H_x}}}$\end{document}</tex-math><alternatives><graphic xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="15-20220176_M1.jpg"/><graphic xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="15-20220176_M1.png"/></alternatives></inline-formula> and <inline-formula><tex-math id="M2">\begin{document}${W_{\Delta {H_z}}}$\end{document}</tex-math><alternatives><graphic xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="15-20220176_M2.jpg"/><graphic xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="15-20220176_M2.png"/></alternatives></inline-formula> increase lineally with the increase of the width of crack, <inline-formula><tex-math id="M3">\begin{document}$\Delta {H_x}$\end{document}</tex-math><alternatives><graphic xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="15-20220176_M3.jpg"/><graphic xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="15-20220176_M3.png"/></alternatives></inline-formula> and <inline-formula><tex-math id="M4">\begin{document}$\Delta {H_z}$\end{document}</tex-math><alternatives><graphic xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="15-20220176_M4.jpg"/><graphic xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="15-20220176_M4.png"/></alternatives></inline-formula>increase with the increase of the length and depth of crack, but gradually decrease with the increase of defect buried depth.

Kelvin-Helmholtz Instability Associated With Reconnection and Ultra Low Frequency Waves at the Ground: A Case Study

The Kelvin-Helmholtz instability (KHI) and its effects relating to the transfer of energy and mass from the solar wind into the magnetosphere remain an important focus of magnetospheric physics. One such effect is the generation of Pc4-Pc5 ultra low frequency (ULF) waves (periods of 45–600 s). On July 3, 2007 at ∼ 0500 magnetic local time the Cluster space mission encountered Pc4 frequency Kelvin-Helmholtz waves (KHWs) at the high latitude magnetopause with signatures of persistent vortices. Such signatures included bipolar fluctuations of the magnetic field normal component associated with a total pressure increase and rapid change in density at vortex edges; oscillations of magnetosheath and magnetospheric plasma populations; existence of fast-moving, low-density, mixed plasma; quasi-periodic oscillations of the boundary normal and an anti-phase relation between the normal and parallel components of the boundary velocity. The event occurred during a period of southward polarity of the interplanetary magnetic field according to the OMNI data and THEMIS observations at the subsolar point. Several of the KHI vortices were associated with reconnection indicated by the Walén relation, the presence of deHoffman-Teller frames, field-aligned ion beams observed together with bipolar fluctuations in the normal magnetic field component, and crescent ion distributions. Global magnetohydrodynamic simulation of the event also resulted in KHWs at the magnetopause. The observed KHWs associated with reconnection coincided with recorded ULF waves at the ground whose properties suggest that they were driven by those waves. Such properties were the location of Cluster’s magnetic foot point, the Pc4 frequency, and the solar wind conditions.

Mantle Electrical Conductivity and the Magnetic Field at the Core–Mantle Boundary

The Earth’s magnetic field is measured on and above the crust, while the turbulent dynamo in the outer core produces magnetic field values at the core–mantle boundary (CMB). The connection between the two sets of values is usually assumed to be independent of the electrical conductivity in the mantle. However, the turbulent magnetofluid in the Earth’s outer core produces a time-varying magnetic field that must induce currents in the lower mantle as it emerges, since the mantle is observed to be electrically conductive. Here, we develop a model to assess the possible effects of mantle electrical conductivity on the magnetic field values at the CMB. This model uses a new method for mapping the geomagnetic field from the Earth’s surface to the CMB. Since numerical and theoretical results suggest that the turbulent magnetic field in the outer core as it approaches the CMB is mostly parallel to this boundary, we assume that this property exists and set the normal component of the model magnetic field to zero at the CMB. This leads to a modification of the Mauersberger–Lowes spectrum at the CMB so that it is no longer flat, i.e., the modified spectrum depends on mantle conductance. We examined several cases in which mantle conductance ranges from low to high in order to gauge how CMB magnetic field strength and mantle ohmic heat generation may vary.

The Relationship between Tribo-Magnetization and Wear State during Reciprocating Sliding

In order to investigate the relationship between tribo-magnetization and wear phenomena, a series of sliding-friction tests were carried out using a pin-on-block reciprocator type device, which was specially designed to generate sliding friction and to detect magnetic fields. The tribological behavior was observed by a charge-coupled device (CCD) camera in real time, and the magnetic signal was detected by using a two-axis magnetic sensor. It was found that as the friction continues, both the tangential and the normal components of magnetic field on the material surface increase gradually, and that both the average value of the tangential magnetic field ΔH(x)mean and the peak-to-peak value of the normal magnetic field Vpp at the wear scar clearly reflect changes of the wear state. Furthermore, in order to better understand the tribo-magnetization phenomenon, the changes of surface morphology and wear debris in different wear stages were analyzed. Moreover, an improved magnetic dipole model that considered the distribution of magnetic charges on the worn surface was established. This model can successfully describe the tribo-magnetization phenomenon during the stable wear stage, and should be useful for characterizing frictional wear phenomena in the future.

Flux Transfer Event With an Electron‐Scale Substructure Observed by the Magnetospheric Multiscale Mission

AbstractOn 12 November 2015 the Magnetospheric Multiscale (MMS) spacecraft traversed the magnetopause from the magnetosphere to the magnetosheath encountering evidence of magnetic reconnection and a tiny flux transfer event (FTE) on the magnetosheath side of the magnetopause boundary layer. The FTE exhibited a large negative‐positive bipolar variation in the normal magnetic field component (BN), an enhanced (negative) north‐south component direction (BL), and a variation in the third component BM resembling a “W” shape with negative values close to the edges and positive values near the center. Using the tetrahedron formation, we estimate that the FTE moved southward and duskward with a speed of VFTE = 324 km/s. The FTE size in the transverse direction is 518 km, which corresponds to 4.42 ion gyroradii. We identify an internal layer where the electron bulk flow velocity exhibits different behaviors at each of the four spacecraft and the current density was more intense at two spacecraft. Within the FTE's core region, the ion bulk flow behavior was similar for all four spacecraft. Using the velocity obtained from timing analysis, we estimate a dimension of this core region to be 181.4 km, which corresponds to 1.5 ion gyroradii. It is evident that the internal region is not large enough to affect the ion behavior but can do so for electrons. We conclude that the FTE's core is an electron‐scale substructure.

Inconsistencies Between Local and Global Measures of CME Radial Expansion as Revealed by Spacecraft Conjunctions

Abstract The radial expansion of coronal mass ejections (CMEs) is known to occur from remote observations, from the variation of their properties with radial distance, and from local in situ plasma measurements showing a decreasing speed profile throughout the magnetic ejecta (ME). However, little is known on how local measurements compare to global measurements of expansion. Here, we present results from the analysis of 42 CMEs measured in the inner heliosphere by two spacecraft in radial conjunction. The magnetic-field decrease with distance provides a measure of their global expansion. Near 1 au, the decrease in their bulk speed provides a measure of their local expansion. We find that these two measures have little relation with each other. We also investigate the relation between characteristics of CME expansion and CME properties. We find that the expansion depends on the initial magnetic-field strength inside the ME, but not significantly on the magnetic field inside the ME measured near 1 au. This is indirect evidence that CME expansion in the innermost heliosphere is driven by the high magnetic pressure inside the ME, while by the time the MEs reach 1 au, they are expanding due to the decrease in the solar-wind dynamic pressure with distance. We also determine the evolution of the ME tangential and normal magnetic-field components with distance, revealing significant deviations as compared to the expectations from force-free field configurations as well as some evidence that the front half of MEs expand at a faster rate than the back half.

Deep neural network Grad–Shafranov solver constrained with measured magnetic signals

A neural network solving the Grad–Shafranov equation constrained with measured magnetic signals to reconstruct magnetic equilibria in real time is developed. The database created to optimize the neural network’s free parameters contains off-line EFIT results as the output of the network from 1118 KSTAR experimental discharges of two different campaigns. Input data to the network constitute magnetic signals measured by a Rogowski coil (plasma current), magnetic pick-up coils (normal and tangential components of magnetic fields) and flux loops (poloidal magnetic fluxes). The developed neural networks fully reconstruct not only the poloidal flux function but also the toroidal current density function with the off-line EFIT quality. To preserve the robustness of the networks against missing input data, an imputation scheme is utilized to eliminate the required additional training sets with a large number of possible combinations of the missing inputs.

The use of magnetic flaw detection to control the offset of the edges of the welded joints of technological pipelines

The task was set of developing recommendations for identifying areas of displacement of the edges of the welded joints of abutting pipes, as well as identifying potentially dangerous sections of welded joints of technological pipelines by changing the normal component of the constant magnetic field. For research, 24 pipe fragments made of steel 20 with a length of 45 mm each were selected. The authors developed recommendations for identifying the presence and zone of displacement of the edges, as well as identifying potentially dangerous sections of welded joints of technological pipelines using the flux-gate control method. It is proposed to use the obtained maximum values of the normal component of the constant magnetic field for the objective detection of edge displacement zones and the determination of potentially hazardous areas. It was shown that the normal component of the constant magnetic field, is quite sensitive both to the displacement of the edges of the welded joints of the pipes and to the quality of the weld, its geometry, defectiveness and determines the above indicators with various characteristic values.

Amorphous Finemet films for visualization of inhomogeneous magnetic fields

This paper shows that amorphous Finemet films can be used as a medium for visualization and topography of inhomogeneous magnetic fields. The intensity of magnetooptical images obtained in the geometry of the polar magneto-optical Kerr effect is proportional to the normal component of the inhomogeneous magnetic field. This allows us to construct two-dimensional topograms of the normal component of the magnetic field. The images observed in the geometry of the longitudinal magneto-optical Kerr effect carry information about the planar component of the field. The vector field of the plane component has singular points that are displayed by magneto-optical images. Applying an external homogeneous field leads to the appearance of new singular points and their motion. At special points, the plane component of the field is equal to the value of the external field. This allows you to display a planar component by recording the coordinates of specific points.

Correlation of the Radial and Meridional Components of IMF and the Solar Wind Velocity: Dependence on the Time and the Fluctuation Frequency

The behavior of the correlation between the radial BR and normal BN components of the interplanetary magnetic field (IMF) in the dependence on the time, the flow type of the solar wind, and the frequency of fluctuations has been studied with consideration of the peculiarities in IMF sectors of different signs. Based on the data of the Wind spacecraft obtained in 1995−2011, it has been found that the correlation between BR and BN is strongest in the periods of the solar activity minima and that the annual averages of the correlation coefficient obey the rules CRN > 0 or CRN < 0 northward or southward of the heliospheric current sheet, respectively. During the solar cycle, the correlation coefficient changes almost similarly in slow and fast solar wind streams. The dependence of the correlation between BR and BN on the fluctuation frequency was analyzed in a range of 1.2 × 10−5 to 8.3 × 10−3 Hz; it has been found that the correlation is maximal at low frequencies and that it slowly decreases, starting from 10−4 Hz, with increases in the frequency. It has been also found that, fluctuations in the components of the solar wind velocity VR and VN correlate analogously to the IMP components BR and BN at frequencies around 10−4 Hz or higher.