Nonspecific Adsorption Research Articles

Antifouling Asymmetric Block Copolymer Nanofilms via Freestanding Interfacial Polymerization for Efficient and Sustainable Water Purification.

Membrane materials that resist nonspecific or specific adsorption are urgently required in widespread practical applications, such as water purification, food processing, and life sciences. In water purification, inevitable membrane fouling not only limits membrane separation performance, leading to a decline in both permeance and selectivity, but also remarkably increases operation requirements, and augments extra maintenance costs and higher energy consumption. In this work, we report a freestanding interfacial polymerization (IP) fabrication strategy for in situ creation of asymmetric block copolymer (BCP) nanofilms with antifouling properties, greatly outperforming the conventional surface post-modification approaches. The resultant free-standing asymmetric BCP nanofilms with highly-dense, highly-hydrophilic polyethylene glycol (PEG) brushes on one side, can be readily formed via a typical IP process of a well-defined double-hydrophilic BCP composed of a highly-efficient antifouling PEG block and a membrane-forming multiamine block. The asymmetric BCP nanofilms have been applied for efficient and sustainable natural water purification, demonstrating extraordinary antifouling capabilities accompanied with superior separation performance far beyond commercial polyamide nanofiltration membranes. The antifouling behaviors of asymmetric BCP nanofilms derived from the combined effect of the hydration layer, electrostatic repulsion and steric hindrance were further elucidated by water flux and fouling resistance in combination with all-atom molecular dynamics (MD) simulation. This work opens up a new avenue for the large-scale and low-cost creation of broad-spectrum, asymmetric membrane materials with diverse functional "defect-free" surfaces in real-world applications.

Antifouling Asymmetric Block Copolymer Nanofilms via Freestanding Interfacial Polymerization for Efficient and Sustainable Water Purification

Membrane materials that resist nonspecific or specific adsorption are urgently required in widespread applications. In water purification, inevitable membrane fouling not only limits separation performance, but also remarkably increases operation requirements, and augments extra maintenance costs and higher energy consumption. In this work, we report a freestanding interfacial polymerization (IP) fabrication strategy for in‐situ creation of asymmetric block copolymer (BCP) nanofilms with antifouling properties, greatly outperforming the conventional surface post‐modification approaches. The resultant asymmetric BCP nanofilms with highly‐dense, highly‐hydrophilic polyethylene glycol (PEG) brushes, can be readily formed via a typical IP process of a double‐hydrophilic BCP composed of an antifouling PEG block and a membrane‐forming multiamine block. The asymmetric BCP nanofilms have been applied for efficient and sustainable natural water purification, demonstrating extraordinary antifouling capabilities accompanied with superior separation performance far beyond commercial polyamide nanofiltration membranes. The antifouling behaviors of BCP nanofilms derived from the combined effect of the hydration layer, electrostatic repulsion and steric hindrance were further elucidated by water flux and fouling resistance in combination with all‐atom molecular dynamics simulation. This work opens up a new avenue for large‐scale and low‐cost creation of broad‐spectrum, asymmetric membrane materials with diverse functional “defect‐free” surfaces in real‐world applications.

Challenges and Advances in Biomarker Detection for Rapid and Accurate Sepsis Diagnosis: An Electrochemical Approach.

Sepsis is a life-threatening condition with high mortality rates due to delayed treatment of patients. The conventional methodology for blood diagnosis takes several hours, which suspends treatment, limits early drug administration, and affects the patient's recovery. Thus, rapid, accurate, bedside (onsite), economical, and reliable sepsis biomarker reading of the clinical sample is an emergent need for patient lifesaving. Electrochemical label-free biosensors are specific and rapid devices that are able to perform analysis at the patient's bedside; thus, they are considered an attractive methodology in a clinical setting. To reveal their full diagnostic potential, electrode architecture strategies of fabrication are highly desirable, particularly those able to preserve specific antibody-antigen attraction, restrict non-specific adsorption, and exhibit high sensitivity with a low detection limit for a target biomarker. The aim of this review is to provide state-of-the-art methodologies allowing the fabrication of ultrasensitive and highly selective electrochemical sensors for sepsis biomarkers. This review focuses on different methods of label-free biomarker sensors and discusses their advantages and disadvantages. Then, it highlights effective ways of avoiding false results and the role of molecular labels and functionalization. Recent literature on electrode materials and antibody grafting strategies is discussed, and the most efficient methodology for overcoming the non-specific attraction issues is listed. Finally, we discuss the existing electrode architecture for specific biomarker readers and promising tactics for achieving quick and low detection limits for sepsis biomarkers.

Fouling-Free electrochemical strategy based on vertically-aligned peptide layer for cardiac troponin I sensitive detection in human serum

BackgroundCardiac troponin I (CTnI) is demonstrated as one of the most promising disease biomarkers for early diagnosing acute myocardial infarction (AMI). To date, electrochemical immunosensors have been extensively studied in the field of cTnI determination. But highly accurate and sensitive cTnI detection by this method is still a challenge due to non-specific adsorption on electrode interfaces in complex human serum. As a result, it is necessary to develop an antifouling electrochemical immunosensor with high sensitivity for the detection of cTnI. ResultsIn this work, an antifouling electrochemical immunosensor was constructed based on vertically-aligned peptide layer consisting of Au nanoparticles (AuNPs) and amphiphilic CEAK16 peptide (CEAK16@AuNPs) for sensitive and accurate detection of cTnI in human serum. The vertically-aligned CEAK16@AuNPs interface provided a stable hydration layer originated from attraction of water molecules by amino acids on the hydrophilic side of the CEAK16, which effectively reduced non-specific adsorption and enhanced electron transfer rate. The cTnI immunosensor possessed great analytical performance with a wide range from 1 fg mL−1 to 1 μg mL−1 and a low detection limit of 0.28 fg mL−1 (S/N = 3). Additionally, the proposed CEAK16@AuNPs sensing interface showed excellent long-term antifouling performance and electrochemical activity that preserved 80 % of the initial signal after 20-days exposure in human serum samples. Consequently, the cTnI immunosensor displayed excellent detection accuracy compared to clinical methods and owned good selectivity, stability and reproducibility. SignificanceThe development of this strategy provides a versatile tool for accurate quantitative cTnI analysis in real human serum, thus helping to achieve early AMI diagnosis effectively and holding the promising potentials for other immunosensor in disease diagnosis.

Magneto-fluorescent nanobiosensor with tetrahedral framework nucleic acid-confined aptamer for trace adenosine triphosphate detection

Accurate quantitation of trace-level ATP biomarkers often suffers from interference of sample matrix and remains a challenge. Herein, a novel magnetic biological nanosensor (MBNS) integrating tetrahedral framework nucleic acid (tFNA)-confined aptamers and ultrasensitive laser-induced fluorescence (LIF) was tailored and evaluated. The fluorescent aptamer nanoprobe hybridized with FAM-labelled cDNA was particularly incorporated into the inner cavity of tFNA, enabling a dual-mode mechanism that integrates molecular size selection and aptamer affinity recognition. By this strategy, the benefits of tFNA molecular sieve, the super sensitive properties of LIF, and the specific recognition of “aptamer gene codes” were integrated, as triggered the superior response of ATP. The structures, properties and reaction mechanism of tFNA, as well as tFNA modified with aptamer probe at different sites, were characterized in detail. A high level of anti-interference was achieved, shielding against non-specific adsorption even in matrices with high protein and analogue content, 103∼105 times higher than ATP. The release of fluorescent beacon from aptamer probe was facilely driven by specific binding of ATP, and an ultra-sensitive detection of 75 pmol/L ATP was obtained without amplification. It was 2–3 orders of magnitude more sensitive than most fluorescent aptasensors. Applied to serum samples, the stability and reproducibility of the resultant aptasensor have been validated with the intra- and inter-assay RSD in 1.6–6.4 % and -1.5–8.4 %, respectively. Acceptable recoveries of 96.5–106.8 % were achieved, consistent with the LC-MS method. It was expected to open a simple and efficient protocol for highly specific and ultrasensitive ATP detection in clinical diagnostics.

Advancing MicroRNA Detection: Enhanced Biotin-Streptavidin Dual-Mode Phase Imaging Surface Plasmon Resonance Aptasensor.

MicroRNAs (miRNAs) are novel tumor biomarkers owing to their important physiological functions in cell communication and the progression of multiple diseases. Due to the small molecular weight, short sequence length, and low concentration levels of miRNA, miRNA detection presents substantial challenges, requiring the advancement of more refined and sensitive techniques. There is an urgent demand for the development of a rapid, user-friendly, and sensitive miRNA analysis method. Here, we developed an enhanced biotin-streptavidin dual-mode phase imaging surface plasmon resonance (PI-SPR) aptasensor for sensitive and rapid detection of miRNA. Initially, we evaluated the linear sensing range for miRNA detection across two distinct sensing modalities and investigated the physical factors that influence the sensing signal in the aptamer-miRNA interaction within the PI-SPR aptasensor. Then, an enhanced biotin-streptavidin amplification strategy was introduced in the PI-SPR aptasensor, which effectively reduced the nonspecific adsorption by 20% and improved the limit of detection by 548 times. Furthermore, we have produced three types of tumor marker chips, which utilize the rapid sensing mode (less than 2 min) of PI-SPR aptasensor to achieve simultaneous detection of multiple miRNA markers in the serum from clinical cancer patients. This work not only developed a new approach to detect miRNA in different application scenarios but also provided a new reference for the application of the biotin-streptavidin amplification system in the detection of other small biomolecules.

An antifouling electrochemical aptasensor based on a Y-shaped peptide for tetracycline detection in milk

Nonspecific adsorption of non-target components (especially proteins) in food matrix on sensing surfaces deteriorates accuracy and sensitivity of electrochemical sensors, which is a key challenge for food safety sensing. Therefore, electrochemical sensors with antifouling capability of high-protein food matrices are highly desired. In this paper, an efficient and simple antifouling electrochemical aptasensor for tetracycline (TC) analysis was constructed based on a self-designed Y-shaped peptide [CPPPPEK-(RSERSERSE)2] consisting of cysteine as the anchoring segment, polyproline as the supporting segment, and -EK-(RSERSERSE)2 as antifouling branches. Hydrophilic and electrically neutral amino acid sequence and Y-shaped space structure of the peptide endow the sensing surface with good antifouling performance in protein solutions and diluted milk. Under optimized experiment conditions, the proposed aptasensor can detect TC with a wide linear range (0.01–100 ng mL−1) and a limit of detection of 5.3 pg mL−1 (S/N = 3). The spiked recovery experiments confirmed high accuracy of the aptasensor in diluted milk without other pretreatments (recoveries: 90.96%–95.86%). This strategy offers a valid way to reduce matrix interference, showing a promise to be extended to other sensing systems for different targets.

A novel method for multiple cardiovascular disease biomarker detection using a SERF-based microfluidic platform

As cardiovascular diseases (CVDs) are the leading cause of death worldwide, it is of great importance to realize a rapid and sensitive diagnosis. Multiple CVD biomarker detection, which holds higher accuracy and speed of early CVD diagnosis, is becoming a promising alternative to single biomarker analysis. Cardiac troponin I (cTnI), C-reactive protein (CRP), brain-type natriuretic peptide (BNP), and heart fatty acid binding protein (H-FABP) are four significant diagnostic biomarkers for CVDs. Among the several methods for biomarker detection, such as optical, magnetic, mechanical, and electrical methods, the magnetic method stands out because of its stability, low toxicity, noninvasive detection, facile manipulation with an external magnetic field, and immunity to the interference of background light. At present, the lack of multiplexing capability, the imprecision of magnetic signal localization, and the agglomeration and non-specific adsorption of magnetic nanoparticles all limit the clinical application of magnetic detection. This paper presented a novel method for multiple CVD biomarker detection using a spin exchange relaxation-free (SERF)-based microfluidic platform. One or more SERF atomic magnetometers were used to scan the remanent field of magnetic labels to detect four CVD biomarkers in 70 min, with a detection limit of 1.88 pg/mL (cTnI), 1.58 pg/mL (CRP), 1.45 pg/mL (BNP), and 1.71 pg/mL (H-FABP). The results showed two-dimensional magnetic fields with a resolution of submillimeter level and a sensitivity of pT level. The measurement technique provides a new magnetic methodology for applications in clinical diagnosis.

Covalent Attachment of Horseradish Peroxidase to Single‐Walled Carbon Nanotubes for Hydrogen Peroxide Detection

AbstractSingle‐walled carbon nanotubes (SWCNTs) are desirable nanoparticles for sensing biological analytes due to their photostability and intrinsic near‐infrared fluorescence. Previous strategies for generating SWCNT nanosensors have leveraged nonspecific adsorption of sensing modalities to the hydrophobic SWCNT surface that often require engineering new molecular recognition elements. An attractive alternate strategy is to leverage pre‐existing molecular recognition of proteins for analyte specificity, yet attaching proteins to SWCNT for nanosensor generation remains challenging. Toward this end, a generalizable platform is introduced to generate protein‐SWCNT‐based optical sensors and use this strategy to synthesize a hydrogen peroxide (H2O2) nanosensor by covalently attaching horseradish peroxidase (HRP) to the SWCNT surface. A concentration‐dependent response is demonstrated to H2O2, confirming the nanosensor can image H2O2 in real‐time, and assess the nanosensor's selectivity for H2O2 against a panel of biologically relevant analytes. Taken together, these results demonstrate successful covalent attachment of enzymes to SWCNTs while preserving both intrinsic SWCNT fluorescence and enzyme function. It is anticipated this platform can be adapted to covalently attach other proteins of interest including other enzymes for sensing or antibodies for targeted imaging and cargo delivery.

NAGase sensing in 3% milk: FET-based specific and label-free sensing in ultra-small samples of high ionic strength and high concentration of non-specific proteins

Biosensing with biological field-effect transistors (bioFETs) is a promising technology toward specific, label-free, and multiplexed sensing in ultra-small samples. The current study employs the field-effect meta-nano-channel biosensor (MNC biosensor) for the detection of the enzyme N-acetyl-beta-D-glucosaminidase (NAGase), a biomarker for milk cow infections. The measurements are performed in a 0.5 μL drops of 3% commercial milk spiked with NAGase concentrations in the range of 30.3 aM–3.03 μM (Note that there is no background NAGase concentration in commercial milk). Specific and label-free sensing of NAGase is demonstrated with a limit-of-detection of 30.3 aM, a dynamic range of 11 orders of magnitude and with excellent linearity and sensitivity. Additional two important research outcomes are reported. First, the ionic strength of the examined milk is ∼120 mM which implies a bulk Debye screening length <1 nm. Conventionally, a 1 nm Debye length excludes the possibility of sensing with a recognition layer composed of surface bound anti-NAGase antibodies with a size of ∼10 nm. This apparent contradiction is removed considering the ample literature reporting antibody adsorption in a predominantly surface tilted configuration (side-on, flat-on, etc.). Secondly, milk contains a non-specific background protein concentration of 33 mg/ml, in addition to considerable amounts of micron-size heterogeneous fat structures. The reported sensing was performed without the customarily exercised surface blocking and without washing of the non-specific signal. This suggests that the role of non-specific adsorption to the BioFET sensing signal needs to be further evaluated. Control measurements are reported.

Hydrogel/MOF Dual-Modified Photoelectrochemical Biosensor for Antibiofouling and Biocompatible Dopamine Detection.

For accurate in vivo detection, nonspecific adsorption of biomacromolecules such as proteins and cells is a severe issue. The adsorption leads to electrode passivation, significantly compromising both the sensitivity and precision of sensing. Meanwhile, common antibiofouling modifications, such as polymer coatings, still grapple with issues related to biocompatibility, electrode passivation, and miniaturization. Herein, we propose a composite antibiofouling coating strategy based on zwitterionic metal-organic frameworks (Z-MOFs) and a combination of acrylamide hydrogels. On a well-designed TiO2/Z-MOF/hydrogel photoelectrode, we achieve highly sensitive and selective detection of dopamine in complex biological environments. The hydrogel's three-dimensional porous structure combined with unique microporous architecture of Z-MOF ensures effective sieving of interfering macromolecules while preserving efficient small molecules and electron transport. This innovative approach paves the way for constructing miniature, in vivo antibiofouling sensors for molecule monitoring in living organisms with complicated chemical environments.

Current status, challenges and prospects of antifouling materials for oncology applications.

Targeted therapy has become crucial to modern translational science, offering a remedy to conventional drug delivery challenges. Conventional drug delivery systems encountered challenges related to solubility, prolonged release, and inadequate drug penetration at the target region, such as a tumor. Several formulations, such as liposomes, polymers, and dendrimers, have been successful in advancing to clinical trials with the goal of improving the drug's pharmacokinetics and biodistribution. Various stealth coatings, including hydrophilic polymers such as PEG, chitosan, and polyacrylamides, can form a protective layer over nanoparticles, preventing aggregation, opsonization, and immune system detection. As a result, they are classified under the Generally Recognized as Safe (GRAS) category. Serum, a biological sample, has a complex composition. Non-specific adsorption of chemicals onto an electrode can lead to fouling, impacting the sensitivity and accuracy of focused diagnostics and therapies. Various anti-fouling materials and procedures have been developed to minimize the impact of fouling on specific diagnoses and therapies, leading to significant advancements in recent decades. This study provides a detailed analysis of current methodologies using surface modifications that leverage the antifouling properties of polymers, peptides, proteins, and cell membranes for advanced targeted diagnostics and therapy in cancer treatment. In conclusion, we examine the significant obstacles encountered by present technologies and the possible avenues for future study and development.

Distinguishable Magnetic Reporter Coordination with Buoyancy-Magnetism Separation for Immobilization-Free Dual-Target Electrochemical Immunosensing.

Simultaneous sensitive and precise determination of multibiomarkers is of great significance for improving detection efficiency, reducing diagnosis and treatment expenses, and elevating survival rates. However, the development of simple and portable biosensors for simultaneous determination of multiplexed targets in biological fluids still faces challenges. Herein, a unique and versatile immobilization-free dual-target electrochemical biosensing platform, which combines distinguishable magnetic signal reporters with buoyancy-magnetism separation, was designed and constructed for simultaneous detection of carcinoembryonic (CEA) and α-fetoprotein (AFP) in intricate biological fluids. To construct such distinguishable magnetic signal reporters with signal transduction, amplification, and output, secondary antibodies of CEA and AFP were respectively functionalized on methylene blue (MB) and 6-(ferrocenyl)hexanethiol (FeC) modified Fe3O4@Au magnetic nanocomposites. Meanwhile, a multifunctional flotation probe with dual target recognition, capture, and isolation capability was prepared by conjugating primary antibodies (Ab1-CEA, Ab1-AFP) to hollow buoyant microspheres. The target antigens of CEA and AFP can trigger a flotation-mediated sandwich-type immunoreaction and capture a certain amount of the distinguishable magnetic signal reporter, which enables the conversion of the target CEA and AFP quantities to the signal of the potential-resolved MB and FeC. Thus, the MB and FeC currents of magnetically adsorbed distinguishable magnetic reporters can be used to determine the CEA and AFP targets simultaneously and precisely. Accordingly, the proposed strategy exhibited a delightful linear response for CEA and AFP in the range of 100 fg·mL-1-100 ng·mL-1 with detection limits of 33.34 and 17.02 fg·mL-1 (S/N = 3), respectively. Meanwhile, no significant nonspecific adsorption and cross-talk were observed. The biosensing platform has shown satisfactory performance in the determination of real clinical samples. More importantly, the proposed approach can be conveniently extended to universal detection just by simply substituting biorecognition events. Thus, this work opens up a new promising perspective for dual and even multiple targets and offers promising potential applications in clinical diagnosis.

A highly stable electrochemical sensor with antifouling and antibacterial capabilities for mercury ion detection in seawater

The monitoring of heavy metal ions in ocean is crucial for environment protection and assessment of seawater quality. However, the detection of heavy metal ions in seawater with electrochemical sensors, especially for long-term monitoring, always faces challenges due to marine biofouling caused by the nonspecific adsorption of microbial and biomolecules. Herein, an electrochemical aptasensor, integrating both antifouling and antibacterial properties, was developed for the detection of Hg2+ in the ocean. In this electrochemical aptasensor, eco-friendly peptides with superior hydrophilicity served as anti-biofouling materials, preventing nonspecific adsorption on the sensing interface, while silver nanoparticles were employed to eliminate bacteria. Subsequently, a ferrocene-modified aptamer was employed for the specific recognition of Hg2+, leveraging the aptamer's ability to fold into a thymine-Hg2+-thymine (T-Hg2+-T) structure upon interaction, and bringing ferrocene nearer to the sensor surface, significantly amplifying the electrochemical response. The prepared electrochemical aptasensor significantly reduced the nonspecific adsorption in seawater while maintaining sensitive electrochemical response. Furthermore, the biosensor exhibited a linear response range of 0.01–100 nM with a detection limit of 2.30 pM, and realized the accurate monitoring of mercury ions in real marine environment. The research results offer new insights into the preparation of marine antifouling sensing devices, and it is expected that sensors with antifouling and antimicrobial capabilities will find broad applications in the monitoring of marine pollutants.

Rapid label-free impedimetric detection of progesterone enhanced by immunomagnetic bead-based competitive immunoreaction

Detecting progesterone (P4) concentration in cow serum is essential for monitoring the pregnancy progress after fertilization and is significant for the dairy farming industry and veterinary medicine. This study reports enzyme-free immunomagnetic beads (IMBs)-based competitive immunoassay for detecting P4 by P4-bovine serum albumin (BSA)-modified biosensors. The anti-P4 antibody-conjugated IMBs serve as collectors to capture P4 in undiluted serum samples to prevent the biosensor surface from biosample contamination and as insulated labels to report the electron-transfer resistance signal of electrochemical impedance spectroscopy (EIS) measurement. The IMBs and P4-containing samples were mixed for 15−30 min, capable of obtaining stable P4@IMB complexes. The 0.2-kGauss pulsed magnetic field (PMF) of the 20-s pulse width and 20-s relaxation time applied for 5 min can shorten the immunoreaction time between the P4@IMBs and the P4-BSA-modified biosensor and reduce the IMB's nonspecific adsorption on the biosensor surface. This competitive immunoassay's cut-off value and detection limit were 7.71 ng/mL and 7.33 ng/mL, respectively, which is lower than the serum's P4 plateau concentration (over 8 ng/mL) of dairy cows on days 6–16 of estrus cycles and that in pregnancy. The IMB-based immunoassay combining the PMF attraction and the label-free EIS measurement exhibits promising potential for rapidly detecting P4 in undiluted serum.

An antifouling electrochemical biosensor using self-signal for Salmonella typhimurium direct detection in food sample

Eating food contaminated by foodborne pathogens can lead to illness. The development of electrochemical sensors for pathogen detection has received widespread attention. However, the analytical performance of electrochemical sensors is inevitably affected by the non-specific adsorption of molecules in the sample. Moreover, the external signal probes might be affected by the complex components in the sample accompanied with signal suppression. This work presents an electrochemical aptasensor for Salmonella typhimurium detection based on the self-signal of poly-xanthurenic acid and the antifouling ability of chondroitin sulfate. The detection time was 60 min. The linear range was from 101 to 107 CFU/mL, and the detection limit was 3 CFU/mL. The biosensors presented good repeatability and storage stability. And the biosensors has been successfully applied in milk and orange juice. This strategy is expected to be applied in the design of other antifouling biosensors, to achieve rapid detection of pathogens and ensure food safety.

Fabrication of dextran-grafted magnetic polymer microspheres with low nonspecific protein adsorption as carriers for chemiluminescence immunoassays

Inhibiting the nonspecific protein adsorption on the surface of magnetic microspheres has become a pressing challenge for immunoassays. In this paper, a novel dextran-modified sandwich-type magnetic polymer microsphere was developed and demonstrated to be a promising carrier for chemiluminescence immunoassay (CLIA). Dextran-modified sandwich-type magnetic polymer microspheres (PFS-PGDN) were synthesized by surface-initiated atom transfer radical polymerization (SI-ATRP) and ring-opening reaction of epoxy and aminodextran on the surface of magnetic P(GMA-MMA)-NH2@Fe3O4@SiO2 (PFS) microspheres. Then, carboxylated dextran-modified sandwich-type magnetic polymer microspheres (PFS-PGDC) were prepared by the surface carboxylation of the microspheres, which allowed the prepared microspheres to better couple with nucleic acids or antibodies. It is found that after grafting dextran, magnetic PFS-PGDC microspheres could significantly reduce the nonspecific protein adsorption by over 90 %. The chemiluminescence immunoassay assay showed a reduction of the background value to a very low level, indicating that the magnetic spheres showed significant advantages in improving the sensitivity of the chemiluminescence assay. Moreover, the chemiluminescence sensitivity and signal values of the synthesized magnetic microspheres have reached high levels. Therefore, the magnetic microspheres synthesized here hold great promise for applications in the field of CLIA.

Short Zwitterionic Sulfobetaine-Modified Silica Nanoparticles: Is Neutrality Possible?

Zwitterionic coatings are an efficient strategy for preventing biomolecule adsorption and enhancing nanoparticle stability in solution. The properties of zwitterions and other antifouling materials, including suppression of nonspecific adsorption and improved colloidal stability of nanoparticles, are believed to derive from their electroneutral and highly hydrophilic nature. Among different zwitterions, short sulfobetaines have been demonstrated to be effective in preventing protein adsorption onto several nanoparticles and providing enhanced colloidal stability. Although zwitterionic sulfobetaine silane (ZS) is electrically neutral, the negatively charged zwitterionic sulfobetaine-functionalized silica nanoparticles (ZS@SiO2NPs) exhibit a similar ζ-potential to nonfunctionalized silica nanoparticles (SiO2NPs). In this work, we present a thorough comprehension of the surface properties of ZS@SiO2NPs, which encompasses the development of meticulous functionalization procedures, detailed characterization approaches, and cutting-edge modeling to address the questions that persist regarding the surface features of ZS@SiO2NPs. The negative charge of ZS@SiO2NPs is due to the stabilization of siloxide from residual surface silanols by the quaternary amine in the sulfobetaine structure. Consequently, we infer that zero-charge ZS@SiO2NPs are unlikely to be obtained since this stabilization increases the dissociation degree of surface silanols, increasing the overall structure negative charge. Additionally, colloidal stability was evaluated in different pH and ionic strength conditions, and it was found that ZS@SiO2NPs are more stable at higher ionic strengths. This suggests that the interaction between ZS and salt ions prevents the aggregation of ZS@SiO2NPs. Together, these results shed light on the nature of the ZS@SiO2NP negative charge and possible sources for the remarkable colloidal stability of zwitterionic nanoparticles in complex media.

Vertical distribution of arsenic and bacterial communities in calcareous farmland amending by organic fertilizer and iron-oxidizing bacteria: Field experiment on concomitant remediation

The migration and transformation mechanisms of arsenic (As) in soil environments necessitate an understanding of its influencing processes. Here, we investigate the subsurface biogeochemical transformation of As and iron (Fe) through amended in the top 20 cm with iron oxidizing bacteria (FeOB) and organic fertilizer (OF). Our comprehensive 400-day field study, conducted in a calcareous soil profile sectioned into 20 cm increments, involved analysis by sequential extraction and assessment of microbial properties. The results reveal that the introduction of additional OF increased the release ratio of As/Fe from the non-specific adsorption fraction (136.47 %) at the subsoil depth (40–60 cm), underscoring the importance of sampling at various depths and time points to accurately elucidate the form, instability, and migration of As within the profile. Examination of bacterial interaction networks indicated a disrupted initial niche in the bottom layer, resulting in a novel cooperative symbiosis. While the addition of FeOB did not lead to the dominance of specific bacterial species, it did enhance the relative abundance of As-tolerant Acidobacteria and Gemmatimonadetes in both surface (39.2 % and 38.76 %) and deeper soils (44.29 % and 23.73 %) compared to the control. Consequently, the amendment of FeOB in conjunction with OF facilitated the formation of poorly amorphous Fe (hydr)oxides in the soil, achieved through abiotic and biotic sequestration processes. Throughout the long-term remediation process, the migration coefficient of bioavailable As within the soil profile decreased, indicating that these practices did not exacerbate As mobilization. This study carries significant implications for enhancing biogeochemical cycling in As-contaminated Sierozem soils and exploring potential bioremediation strategies. Environmental implicationThe long-term exposure of sewage irrigation has potential adverse effects on the local ecosystem, causing serious environmental problems. Microorganisms play a vital role in the migration and transformation of arsenic in calcareous soil in arid areas, which highlights the necessity of understanding its dynamics. The vertical distribution, microbial community and fate of arsenic in calcareous farmland soil profile in northwest China were studied through field experiments. The results of this work have certain significance for the remediation of arsenic-contaminated soil in arid areas, and provide new insights for the migration, transformation and remediation of arsenic in this kind of soil.

Multi-channel prismatic localized surface plasmon resonance biosensor for real-time competitive assay multiple COVID-19 characteristic miRNAs

A multi-channel prismatic localized surface plasmon resonance (LSPR) biosensor was developed for quantitative and real-time detection of multiple COVID-19 characteristic miRNAs. The well-dispersed and dense gold nanoparticles (AuNPs) arrays for LSPR biosensing were fabricated through a nano-thickness diblock copolymer template (BCPT). Both theoretical and experimental analyses were conducted to investigate the effects of particle size, interparticle spacing, and surface coverage on LSPR sensing spectrum and intensity sensitivity of varied AuNPs sizes. A competitive assay strategy was proposed and used for non-amplification miRNA detection with a low limit detection of 3.41 nM, while a four-channel prismatic LSPR system enables parallel detection of multiple miRNAs. Furthermore, this sensing strategy can effectively and specifically identify target miRNA, distinguish mismatched miRNA and interfering miRNA, and exhibit low non-specific adsorption. This BCPT-based LSPR biosensor demonstrates the practicality and potential of a multi-channel, adaptable, and integrated prismatic sensor in medical testing and diagnostic applications.