The controlling factor in designing non-load bearing masonry walls, such as those used in Kuwait, is the lateral resistance to wind loads. To ensure safety of the walls, data is needed on the flexural strength characteristics of walls constructed with locally-available materials. The flexural strength of masonry walls constructed with autoclaved aerated-concrete blocks, sand-cement concrete blocks or calcium silicate bricks was evaluated in a test program that involved testing small-scale walls or wallettes. The tests were performed in accordance with the British Standard for unreinforced masonry. The autoclaved aerated-concrete block wallettes were constructed with epoxy glue mortar, whereas the concrete block and calcium silicate brick walletters were constructed with sand-cement mortar. Two stages of testing were undertaken to evaluate bending parallel to bed joints and bending perpendicular to bed joints.