A seismic response analysis of layered, liquefiable sites plays an important role in the seismic design of both aboveground and underground structures. This study presents a detailed dynamic site response analysis procedure with advanced nonlinear soil constitutive models for non-liquefiable and liquefiable soils in the OpenSees computational platform. The stress ratio controlled, bounding surface plasticity constitutive model, PM4Sand, is used to simulate the nonlinear response of the liquefiable soil layers subjected to two seismic ground motions with different characteristics. The nonlinear hysteretic behavior of the non-liquefiable soil under earthquake excitations is captured by the Pressure Independent Multi Yield kinematic plasticity model with a von Mises multi-yield surface. The soil elements are modelled utilizing the solid–fluid fully coupled plane-strain u-p elements. The seismic response of the layered liquefiable site in terms of the development of excess pore water pressure, acceleration, ground surface settlement, and stress–strain and effective stress path time histories under two representative earthquake excitations are investigated in this study. The numerical results indicate that both the characteristics of ground motions and the site profile have a significant influence on the dynamic response of the layered liquefiable site. Under the same intensity of ground motion, the loose sand layer with a 35% relative density is more prone to liquefaction and contractive deformation, which causes irreversible residual deformation and vertical settlement. The saturated soil layer can effectively filter the high-frequency components and amplify the low-frequency components of ground motions. Moreover, the liquified site produces a 40% post-earthquake consolidation settlement after the excess pore pressure dissipation.
Read full abstract