Noncovalent Research Articles

Synthesis, structure, and luminescence properties of a 0D organic-inorganic cadmium iodide: Combined experimental and theoretical approach

Hybrid organic-inorganic metal halide materials with zero-dimensional (0D) structures have emerged as a captivating field of research due to their distinctive electronic properties and remarkable broadband emission characteristics. In this study, we successfully synthesized a novel hybrid cadmium iodide compound, (BZA)2CdI4.H2O (BZA+: benzylammonium), in the form of single crystals employing the solvent-evaporation method. The room temperature single-crystal X-ray diffraction analysis revealed that (BZA)2CdI4.H2O possesses a typical 0D crystal structure, where (CdI4)2− anions are spatially isolated and surrounded by (BZA)+ cations and H2O molecules. The crystal packing is intricately governed by various non-covalent intermolecular interactions, including π–π stacking interactions, NH…I, NH…O, and OH…I hydrogen bonds, quantified through Hirshfeld surface analysis. Thermal analysis further demonstrated that the removal of water molecules in the crystal lattice yields a dehydrated phase of (BZA)2(CdI4). Upon 330 nm irradiation, the title compound displayed a broad bluish-white light emission, featuring a primary band at 430 nm and a secondary band at 500 nm. Based on photoluminescence spectra measurements and density functional theory (DFT) calculations, the dual-band emission is assigned to the emission of (BZA)+ organic cations and to excitons confined in the [CdI4]2– isolated inorganic tetrahedron, respectively. Interestingly, the presence of isolated molecular units in the 0-D structure results in strongly localized charges and bluish-white light emission with Commission International de l'Eclairage (CIE) colour coordinates (0.23, 0.28). These results confirm the promise of 0D metal-halide hybrids with dual-band emission as luminescent materials for solid-state lighting.

Quantum computational, solvation and in-silico biological studies of a potential anti-cancer thiophene derivative

Heterocyclic molecules display a wide spectrum of properties that span both material and biological domains. Material properties stem from their interactions in the bulk, where a large number of molecules of the same type get together resulting in an enhancement of properties. However, biological properties emanate from the interaction of a single or a few molecules with a biologically functional macromolecule. Computational tools offer a particularly useful way of theoretically studying molecules to arrive at a conclusion regarding such properties, even though they may vary when experimentally evaluated. This study concerns itself with the theoretical investigation comprising density functional theory calculations, topological analyses and in-silico biological evaluation of a thiophene compound, i.e. the title compound. Density functional theory was used to compute properties of the title molecule and their variations in unsolvated and solvated phases using Gaussian 09. The molecule in solvent phases encompassing organic polar protic, organic polar aprotic and inorganic polar protic nature have been subjected to theoretical investigations. The suitability of the molecule for deployment as a modern optical material is examined with positive results. Topological characteristics of the molecule were evaluated using Multiwfn 3.8 to examine electron density distribution and the possible resulting covalent, non-covalent and weak interactions because of such distribution. The potency of the molecule towards brain cancer was evaluated by molecular docking with Auto Dock Tools against two brain cancer protein targets 6ETJ and 6YPE with a good docking score of −6.63 and −6.21 kcal mol−1 respectively and the resulting interactions visualized and its pharmacokinetic properties obtained using online tools.

κ-Carrageenan improves the gelation capacity of Antarctic krill myofibrillar proteins through covalent and noncovalent interactions

Antarctic krill is a consumption resource with great exploitation potential. Previous study has found that carrageenan contributed to the improvement of texture characteristics of Antarctic krill surimi, but the specific synergistic mechanism remains unclear. This study aimed to evaluate and map the synergistic effect of κ-carrageenan on the quality properties of the myofibrillar protein complex gels of Antarctic krill and its potential modification sites. The analysis of physical quality, structure and molecular force showed that the incorporation of κCG induced the unfolding of myofibrillar proteins, resulting in alterations in the spatial conformation of the proteins, exposure of side-chain groups, and enhancement of intramolecular or intermolecular interactions in the gel system, which increased crosslinking of the MP-κCG composite gel networks. The higher degree of cross-linking facilitated the formation of denser network structures with higher storage and loss moduli, ultimately leading to improved gel quality properties. Notably, κCG plays a dual role in the gel network: it can not only support and stabilize the network structure of gel protein by filling the gaps, but also directly participate in the formation of gels by non-covalent and covalent interactions. Through the identification of the potential modification sites of κCG on Antarctic krill proteins, it was found that the main modified protein was myosin heavy chain and actin. Furthermore, lysine, arginine, threonine, serine and histidine were found to have high adduction quantities and reaction efficiencies. These findings are helpful to guide the quality control of Antarctic krill meat in the application process.

Tough bilayer thermo‐responsive hydrogel actuator reinforced by Fe3+ complexation

AbstractHydrogel actuators usually suffer from the poor mechanical property, which hinders their wide applications. In this study, we propose a tough bilayer hydrogel actuator that can respond quickly to temperature. The hydrogels are composed of poly(N‐isopropylacylamide) (PNIPAM) layer and poly(acrylamide‐co‐acrylic acid) (P(AAm‐co‐AAc)) layer strengthened through Fe3+ complexation with carboxyl groups. By optimizing the PNIPAM content, the resulting bilayer hydrogel P(NIPAM0.9/AAm‐co‐AAc)‐Fe3+ exhibits fast and large‐amplitude bending and recovery in response to temperature. It also shows excellent mechanical properties with a tensile strength of 2.54 MPa, tensile modulus of 3.7 MPa, and toughness of 9.4 MJ/m3, respectively. Besides, the multiple noncovalent interactions within the hydrogels, including Fe+‐mediated coordination and hydrogen bonds, can serve as dynamic but stable associations, leading to a good self‐healing ability. The bilayer hydrogel is further made into a gripper that can effectively and sensitively respond to temperature to capture and release an object, showing its potential application in artificial intelligent devices.

Electronic Effect Driven Specific and Sensitive Recognition toward GHB.

Precise detection of a trace substance that intrinsically possesses weak chemical activity and less-distinctive spatial structure is of great significance, but full of challenges, as it could not be effectively recognized via either an active covalent reaction process or multiple noncovalent interactions toward its simple structure. Here, the electronic-effect-driven recognition strategy was proposed to visually sense an illicit drug, γ-hydroxybutyric acid (GHB), which was treated as an analyte model due to its inherent simple structure. In particular, a sensing system composed of two probes substituted by the nitro (-NO2) and the hydrogen (-H), was constructed with the characteristic yellow coloring and blue fluorescence, as well as high sensitivity (0.586 ng/mL), fast response (0.2 s), and specific recognition, even in the presence of 22 interferents. In addition, a portable eyeshadow box-like sensing chip was fabricated and proven to be reliable and feasible in sensing GHB disguised in liquors for self-protection in a covert manner. Hence, this work developed an electronic-effect-driven modulation strategy of the recognition interaction between the probe and the analyte and, thus, would open up a new thought for detecting the analyte with weak activity and a simple structure, as well as propel the relevant application in real scenarios.

A theoretical investigation for improving the performance of non-fullerene organic solar cells through side-chain engineering of BTR non-fused-ring electron acceptors

In the current quantum chemical study, indacenodithiophene donor core-based the end-capped alterations of the reference chromophore BTR drafted eight A2-A1-D-A1-A2 type small non-fullerene acceptors. All the computational simulations were executed under MPW1PW91/6-31G (d, p) level of DFT. The UV–Vis absorption, open circuit voltage, electron affinity, ionization potential, the density of states, reorganization energy, orbital analysis, and non-covalent interactions were studied and compared with BTR. Several molecules of our modeled series BT1-BT8 have shown distinctive features that are better than those of the BTR. The open circuit voltage (VOC) of BT5 has a favorable impact, allowing it to replace BTR in the field of organic solar cells. The charge carrier motilities for proposed molecules generated extraordinary findings when matched to the reference one (BTR). Further charge transmission was confirmed by creating the complex with a PM6 donor molecule. The remarkable dipole moment contributes to the formation of non-covalent bond interactions with chloroform, resulting in superior charge mobility. Based on these findings, it can be said that every tailored molecule has the potential to surpass chromophore molecule (BTR) in OSCs. So, all tailored molecules may enhance the efficiency of photovoltaic cells due to the involvement of potent terminal electron-capturing acceptor2 moieties. Considering these obtained results, these newly presented molecules can be regarded for developing efficient solar devices in the future.

Functionally Modified Polymer Electrolyte Based on Noncovalent Interaction for Stable Lithium Metal Batteries.

The charge transfer efficiency of the solid electrolyte depends on the number of lithium ions that can be effectively transported and participate in the electrode reaction. However, limited by the strong coupling relationship between Li+ and Lewis basic sites on the polymer chain, the Li+ transference number (tLi+) of the solid polymer electrolyte (SPE) based dual-ion conductor is typically low, resulting in excessive anion aggregation at the electrode side and inducing concentration polarization. In this study, we present a functionalized modified polymer electrolyte (FMPE) with selective cation transport, which was synthesized by embedding 4-(trifluoromethyl)styrene (TFS) functionalized groups onto the poly(diethylene glycol diacrylate) polymer chain. The TFS group formed noncovalent couplings with TFSI- anions through hydrogen bondings and dipole-dipole interactions, which effectively limited the migration of the anions and contributed to the elevated tLi+ of the FMPEs to 0.595 and 0.699 at 25 and 60 °C, respectively. Density functional theory (DFT) calculations were performed to verify the increased anion migration barriers for different noncovalent interactions and revealed that the conjugated system formed by the delocalized π electrons of the benzene ring and the C═O groups helped to disperse the electron distribution of the polymer chains. Consequently, the decrease in the degree of Li+ immobilization promotes the decoupling and migration of Li+ between the polymer chains. Benefiting from optimized Li+ transport behavior, the lithium metal batteries (LMBs) assembled by FMPEs and LiFePO4 exhibit excellent rate performance (discharge specific capacity of 88.8 mAh g-1 at 5 C) and stable long-term cycle performance (capacity decay rate of only 0.064% per cycle for 500 cycles at 25 °C and 0.5 C).

Non-covalent interactions constructor of 3D networks of Co (II) and Cu (II) complexes with pyridine ligands: systematic theoretical and experimental survey

Non-covalent interactions constructor of 3D networks of Co (II) and Cu (II) complexes with pyridine ligands: systematic theoretical and experimental survey

Concentration-induced spontaneous polymerization of protic ionic liquids for efficient in situ adhesion

The advancement of contemporary adhesives is often limited by the balancing act between cohesion and interfacial adhesion strength. This study explores an approach to overcome this trade-off by utilizing the spontaneous polymerization of a protic ionic liquid-based monomer obtained through the neutralization of 2-acrylamide-2-methyl propane sulfonic acid and hydroxylamine. The initiator-free polymerization process is carried out through a gradual increase in monomer concentration in aqueous solutions caused by solvent evaporation upon heating, which results in the in-situ formation of a tough and thin adhesive layer with a highly entangled polymeric network and an intimate interface contact between the adhesive and substrate. The abundance of internal and external non-covalent interactions also contributes to both cohesion and interfacial adhesion. Consequently, the produced protic poly(ionic liquid)s exhibit considerable adhesion strength on a variety of substrates. This method also allows for the creation of advanced adhesive composites with electrical conductivity or visualized sensing functionality by incorporating commercially available fillers into the ionic liquid adhesive. This study provides a strategy for creating high-performance ionic liquid-based adhesives and highlights the importance of in-situ polymerization for constructing adhesive composites.

Competition between O-H and S-H Intermolecular Interactions in Conformationally Complex Systems: The 2-Phenylethanethiol and 2-Phenylethanol Dimers.

Noncovalent interactions involving sulfur centers play a relevant role in biological and chemical environments. Yet, detailed molecular descriptions are scarce and limited to very simple model systems. Here we explore the formation of the elusive S-H···S hydrogen bond and the competition between S-H···O and O-H···S interactions in pure and mixed dimers of the conformationally flexible molecules 2-phenylethanethiol (PET) and 2-phenylethanol (PEAL), using the isolated and size-controlled environment of a jet expansion. The structure of both PET-PET and PET-PEAL dimers was unraveled through a comprehensive methodology that combined rotationally resolved microwave spectroscopy, mass-resolved isomer-specific infrared laser spectroscopy, and quantum chemical calculations. This synergic experimental-computational approach offered unique insights into the potential energy surface, conformational equilibria, molecular structure, and intermolecular interactions of the dimers. The results show a preferential order for establishing hydrogen bonds following the sequence S-H···S < S-H···O ≲ O-H···S < O-H···O, despite the hydrogen bond only accounting for a fraction of the total interaction energy.

Development of interpenetrating network hydrogels: Enhancing the release and bioaccessibility of green tea polyphenols

Green Tea polyphenols (GTP) are important bioactive compounds with excellent physiological regulation functions. However, they are easily destroyed by the gastric environment during digestion. In this work, a sodium alginate (SA)-gellan gum (GG) interpenetrating network (IPN) hydrogel was synthesized to protect and delivery GTP. The ratio of SA/GG significantly affects the network structure of IPN hydrogels and the performance of delivering GTP. The hydrogel formed by interpenetrating 20 % GG with 80 % SA as the main network had the highest water uptake (55 g/g), holding capacity (950 mg/g), and freeze-thaw stability, with springiness reaching 0.933 and hardness reaching 1300 g, which due to the filling effect and non-covalent interaction. Rheological tests showed that the crosslink density of IPN hydrogel in SA-dominated network was improved by the addition of GG to make it better bound to GTP, and the higher water uptake meant that the system could absorb more GTP-containing solution. This IPN hydrogel maintained 917.3 mg/g encapsulation efficiency at the highest loading capacity (1080 mg/g) in tests as delivery system. In in vitro digestion simulations, owing to the pH responsiveness, the IPN hydrogel reduced the loss of GTP in gastric fluid, achieving a bioaccessibility of 71.6 % in the intestinal tract.

A Simple and Promising Prediction Model to Analyze the Optical Properties of Organic Photovoltaic Materials

Optimizing light utilization is crucial in organic photovoltaics. Understanding the intricate connection between the optical properties and the chemical structure of organic materials is pivotal yet challenging in this regard. Herein, over 2800 published reports with a database of ≈300 organic non‐fullerene acceptors (NFAs) are surveyed and a mathematical model suitable for predicting and analyzing the optical properties of organic photovoltaic materials is established. The model is used to predict the optical properties of representative NFAs within experimental error, including four newly synthesized organic materials to validate the model. In addition, the reliability and applicability of the model through data transformation are demonstrated and it is found that the addition of double bonds and asymmetry in the chemical structure does not necessarily reduce the optical bandgap of organic materials. Based on the model, the strong noncovalent interaction is more significant than the weak noncovalent interaction and asymmetry on the reduction of the bandgap, which provides new insights into the design and development of organic photovoltaic materials with tunable optical properties.

Theoretically designed M@diaza[2.2.2]cryptand complexes: the role of non-covalent interactions in promoting NLO properties of organic electrides

ABSTRACT Organic excess electron compounds with significant nonlinear optical (NLO) properties are widely employed in optoelectronic applications. Herein, single-alkali metals with diaza[2.2.2] cryptand (M@crypt,M=Li, Na, and K) are investigated for optoelectronic and NLO properties by using the density functional theory. Thermodynamic and kinetic stabilities of present complexes are computed through interaction energy (Eint) and ab-initio molecular dynamic (AIMD) simulations. M@crypt complexes carry excess electrons and mimic molecular electrides. Quantum theory of atoms in molecules (QTAIM) analysis and reduced density gradient (RDG) spectra demonstrate the roles of the weak van der Waals (vdW) interactions between metal and complexant. The remarkable hyperpolarizability (βo) value up to 1.41 × 106 au may be credited to the presence of loosely bound excess electrons. The hyper Rayleigh scattering hyperpolarizability (βHRS) is recorded up to 1.31 × 106 au for the K@crypt. Furthermore, frequency-dependent first-order and second-order hyperpolarizability is more prominent at the applied frequency of ω = 0.042823 au. The electron localizing function (ELF) and localized orbital locator (LOL) analysis further disclose the nature of interaction between alkali metal and complexant. The TD-DFT method is adopted to get excited state parameters and absorbance properties. An electron density difference map (EDDM) is exploited to evaluate the orbital contributions in excited states. Hence, the studied electride may become a promising candidate for NLO materials. We anticipate that the present work will provide insight into further development of molecular electride for optoelectronic applications.

General Synthesis of Metal Indium Sulfide Atomic Layers for Photocatalysis.

The metal indium sulfides have attracted extensive research interest in photocatalysis due to regulable atomic configuration and excellent optoelectronic properties. However, the synthesis of metal indium sulfide atomic layers is still challenging since intrinsic non-van-der-Waals layered structures of some components. Here, a surfactant self-assembly growth mechanism is proposed to controllably synthesize metal indium sulfide atomic layers. Eleven types of atomic layers with tunable compositions, thickness, and defect concentrations are successfully achieved namely In2S3, MgIn2S4, CaIn2S4, MnIn2S4, FeIn2S4, ZnIn2S4, Zn2In2S5, Zn4In16S33, CuInS2, CuIn5S8, and CdIn2S4. The typical CaIn2S4 shows a defect-dependence activity for CO2 photoreduction. The designed S vacancies in CaIn2S4 can serve as catalytic centers to activate CO2 molecules via localized electrons for π-back-donation. The engineered S vacancies tune the non-covalent interaction with CO2 and intermediates, manages to tune the free energy, and lower the reaction energy barrier. As a result, the defect-rich CaIn2S4 displays 2.82× improved reduction rate than defect-poor CaIn2S4. Meantime, other components also display promising photocatalytic performance, such as Zn2In2S5 with a H2O2 photosynthesis rate of 292µmolg-1h-1 and CuInS2 with N2-NH4 + conversion rate of 54µmolg-1h-1. This work paves the way for the multidisciplinary exploration of metal indium sulfide atomic layers with unique photocatalysis properties.

Unveiling Non-Covalent Interactions in Novel Cooperative Photoredox Systems for Efficient Alkene Oxidation in Water.

A new cooperative photoredox catalytic system, [RuII(trpy)(bpy)(H2O)][3,3'-Co(8,9,12-Cl3-1,2-C2B9H8)2]2, 5, has been synthesized and fully characterized for the first time. In this system, the photoredox catalyst [3,3'-Co(8,9,12-Cl3-1,2-C2B9H8)2]-[Cl6-1]-, a metallacarborane, and the oxidation catalyst [RuII(trpy)(bpy)(H2O)]2+, 2 are linked by non-covalent interactions. This compound, along with the one previously synthesized by us, [RuII(trpy)(bpy)(H2O)][(3,3'-Co(1,2-C2B9H11)2]2, 4, are the only examples of cooperative molecular photocatalysts in which the catalyst and photosensitizer are not linked by covalent bonds. Both cooperative systems have proven to be efficient photocatalysts for the oxidation of alkenes in water through Proton Coupled Electron Transfer processes (PCETs). Using 0.05 mol% of catalyst 4, total conversion values were achieved after 15 min with moderate selectivity for the corresponding epoxides, which decreases with reaction time, along with the TON values. However, with 0.005 mol% of catalyst, the conversion values are lower, but the selectivity and TON values are higher. This occurs simultaneously with an increase in the amount of the corresponding diol for most of the substrates studied. Photocatalyst 4 acts as a photocatalyst in both the epoxidation of alkenes and their hydroxylation in aqueous medium. The hybrid system 5 shows generally higher conversion values at low loads compared to those obtained with 4 for most of the substrates studied. However, the selectivity values for the corresponding epoxides are lower even after 15 min of reaction. This is likely due to the enhanced oxidizing capacity of CoIV in catalyst 5, resulting from the presence of more electron-withdrawing substituents on the metallacarborane platform.

Crystal Structure of 2-(Ethoxymethylene)Malononitrile, Hirshfeld Surface Analysis and DFT Evaluation of the Non-covalent Interactions Energy

Crystal Structure of 2-(Ethoxymethylene)Malononitrile, Hirshfeld Surface Analysis and DFT Evaluation of the Non-covalent Interactions Energy

Single crystal investigations, hirshfeld surface analysis, DFT studies, Molecular docking and Physico-Chemical characterization of a Cu(II) dimethylpiperazinium salt

A novel centrosymmetric hybrid organic-inorganic material (1,4-dimethylpiperazine tetrachlorocuprate (II)) has been prepared and analyzed using single crystal X-ray diffraction, spectroscopic studies, photoluminescence properties, DFT studies and Hirshfeld surface analyses. The single crystal X-ray analysis indicates that the compound crystallizes in the P21/c monoclinic space group. The N–H···Cl hydrogen bonds are alternately connected by organic cations [C6H16N2]2+ and inorganic moieties [CuCl4]2-. The Hirshfeld surfaces investigated the nature and quantity of different interactions and their role in crystal packing. Infrared and Hirshfeld measurements were performed to confirm the results obtained by X-ray diffraction. In addition, optical measurements were used to investigate the IR and photoluminescence properties. The di-electrical investigations show interesting electrical behavior of the compound. In addition, an insilico investigation using molecular docking of the compound against SARS-CoV-2 variation (B.1.1.529) was also conducted to better understand the non-covalent interaction of cuprate(II) complexes with active amino acids in the SARS-CoV-2 spike proteins. These studies were supported by drug-likeness and absorption, distribution, metabolism, and excretion (ADME) analyses.

A General Strategy for Food Traceability and Authentication Based on Assembly-Tunable Fluorescence Sensor Arrays.

Food traceability and authentication systems play an important role in ensuring food quality and safety. Current techniques mainly rely on direct measurement by instrumental analysis, which is usually designed for one or a group of specific foods, not available for various food categories. To develop a general strategy for food identification and discrimination, a novel method based on fluorescence sensor arrays is proposed, composed of supramolecular assemblies regulated by non-covalent interactions as an information conversion system. The stimuli-responsiveness and tunability of supramolecular assemblies provided an excellent platform for interacting with various molecules in different foods. In this work, five sensor arrays constructed by supramolecular assemblies composed of pyrene derivatives and perylene derivatives are designed and prepared. Assembly behavior and sensing mechanisms are investigated systematically by spectroscopy techniques. The traceability and authentication effects on several kinds of food from different origins or grades are evaluated and verified by linear discriminant analysis (LDA). It is confirmed that the cross-reactive signals from different sensor units encompassing all molecular interactions can generate a unique fingerprint pattern for each food and can be used for traceability and authentication toward universal food categories with 100% accuracy.

Crystal structure of a three-coordinate lithium complex with monodentate phenyloxazoline and hexamethyldisilylamide ligands

The reaction of lithium hexamethyldisilylamide, [Li{N(Si(CH3)3)2}] (LiHMDS), with 4,4-dimethyl-2-phenyl-2-oxazoline (Phox, C11H13NO) in hexane produced colourless crystals of bis(4,4-dimethyl-2-phenyl-2-oxazoline-κN)(hexamethyldisilylamido-κN)lithium, [Li(C6H18NSi2)(C11H13NO)2] or [Li{N(Si(CH3)3)2}(Phox)2] in high yield (89%). Despite the 1:1 proportion of the starting materials in the reaction mixture, the product formed with a 1:2 amide:oxazoline ratio. In the unit cell of the C2/c space group, the neutral molecules lie on twofold rotation axes coinciding with the Li—N(amide) bonds. The lithium(I) centre adopts a trigonal–planar coordination geometry with three nitrogen donor atoms, one from the HMDS anion and two from the oxazolines. All ligands are monodentate. In the phenyloxazoline units, the dihedral angle defined by the five-membered heterocyclic rings is 35.81 (5)°, while the phenyl substituents are approximately face-to-face, separated by 3.908 (5) Å. In the amide, the methyl groups assume a nearly eclipsed arrangement to minimize steric repulsion with the analogous substituents on the oxazoline rings. The non-covalent interactions in the solid-state structure of [Li{N(Si(CH3)3)2}(Phox)2] were assessed by Hirshfeld surface analysis and fingerprint plots. This new compound is attractive for catalysis due to its unique structural features.

A comprehensive study of experimental and theoretical characterization and in silico toxicity analysis of new molecules

In this study, for the first time in the literature, a 2-(3-methoxyphenylamino)-2-oxoethyl acrylate (3MPAEA) molecule was synthesized in two steps, and a 2-chloro-N-(3-methoxyphenyl)acetamide (m-acetamide) was obtained in the first step. Experimental results were obtained using FTIR, 1H, and 13C NMR spectroscopy methods for m-acetamide and 3MPAEA compounds created in the laboratory environment and compared with theoretical results. Band gap (BG) energy, chemical hardness, electronegativity, chemical potential, and electrophilicity index were calculated. With vibration spectroscopic analysis, atom–molecule vibrations of the theoretical and experimental peaks of the spectrum were observed. The locations of C and H atoms were determined by nuclear magnetic resonance spectroscopy. The green, blue, and red regions of the potential energy map (MEP) map were examined. Some observed that the energy thermal, heat capacity, and entropy graphs increased in direct proportion to increasing the temperature in Kelvin, which is known as thermochemistry. The changes in the rotation, translation, and vibration of the molecule as its temperature increased were examined. When the thermochemistry surface map was examined, some observed that the temperature was high in the middle binding site of the molecules. Covalent interactions were graphed using the non-covalent interactions (NCIs) calculation method. In silico toxicity studies were carried out for m-acetamide and 3MPAEA molecules: fathead minnow LC50 (96 h), Daphnia magna LC50 (48 h), Tetrahymena pyriformis IGC50 (48 h), oral rat LD50, water solubility, bioconcentration factor, developmental toxicity, mutation, normal boiling point, flash point, melting point, density, thermal conductivity, viscosity, vapor pressure, etc. parameters were investigated.