Nonclassical Light Research Articles

Multiqubit quantum state preparation enabled by topology optimization

Using topology optimization, we inverse-design nanophotonic cavities enabling the preparation of pure states of pairs and triples of quantum emitters. Our devices involve moderate values of the dielectric constant, operate under continuous laser driving, and yield fidelities to the target (Bell and W) states approaching unity for distant qubits (several natural wavelengths apart). In the fidelity optimization procedure, our algorithm generates entanglement by maximizing the dissipative coupling between the emitters, which allows the formation of multipartite pure steady states in the driven-dissipative dynamics of the system. Our findings open the way toward the efficient and fast preparation of multiqubit quantum states with engineered features, with potential applications for nonclassical light generation, and quantum sensing and metrology.

Narrowband Electroluminescence from Color Centers in Hexagonal Boron Nitride.

Defects in wide bandgap materials have emerged as promising candidates for solid-state quantum optical technologies. Electrical excitation of single emitters may lead to scalable on-chip devices and therefore is highly sought after. However, most wide bandgap materials are not amenable to efficient doping, posing challenges for electrical excitation and on-chip integration. Here, we demonstrate narrowband electroluminescence from visible and near-infrared color centers in hexagonal boron nitride (hBN). We harness van der Waals tunnel junctions of graphene-hBN-graphene. Charge carriers are electrically injected into hBN, exciting localized defects that emit nonclassical light, as characterized by the second order correlation measurement. Remarkably, the devices operate at room temperature and produce robust, narrowband emission spanning from visible to the near-infrared. Our work marks an important milestone in vdW materials and their promising attributes for integrated quantum technologies and on-chip photonic circuits.

Plasmonic Nanocavity to Boost Single Photon Emission From Defects in Thin Hexagonal Boron Nitride

AbstractEfficient and compact single photon emission platforms operating at room temperature with ultrafast speed and high brightness will be fundamental components of the emerging quantum communications and computing fields. However, so far, it is very challenging to design practical deterministic single photon emitters based on nanoscale solid‐state materials that meet the fast emission rate and strong brightness demands. Here, a solution is provided to this longstanding problem by using metallic nanocavities integrated with hexagonal boron nitride (hBN) flakes with defects acting as nanoscale single photon emitters (SPEs) at room temperature. The presented hybrid nanophotonic structure creates a rapid speedup and large enhancement in single photon emission at room temperature. Hence, the nonclassical light emission performance is substantially improved compared to plain hBN flakes and hBN on gold‐layered structures without nanocavity. Extensive theoretical calculations are also performed to accurately model the new hybrid nanophotonic system and prove that the incorporation of plasmonic nanocavity is key to efficient SPE performance. The proposed quantum nanocavity single photon source is expected to be an element of paramount importance to the envisioned room‐temperature integrated quantum photonic networks.

InGaP χ(2) integrated photonics platform for broadband, ultra-efficient nonlinear conversion and entangled photon generation

Nonlinear optics plays an important role in many areas of science and technology. The advance of nonlinear optics is empowered by the discovery and utilization of materials with growing optical nonlinearity. Here we demonstrate an indium gallium phosphide (InGaP) integrated photonics platform for broadband, ultra-efficient second-order nonlinear optics. The InGaP nanophotonic waveguide enables second-harmonic generation with a normalized efficiency of 128, 000%/W/cm2 at 1.55 μm pump wavelength, nearly two orders of magnitude higher than the state of the art in the telecommunication C band. Further, we realize an ultra-bright, broadband time-energy entangled photon source with a pair generation rate of 97 GHz/mW and a bandwidth of 115 nm centered at the telecommunication C band. The InGaP entangled photon source shows high coincidence-to-accidental counts ratio CAR > 104 and two-photon interference visibility > 98%. The InGaP second-order nonlinear photonics platform will have wide-ranging implications for non-classical light generation, optical signal processing, and quantum networking.

Efficient photon-pair generation in layer-poled lithium niobate nanophotonic waveguides

Integrated photon-pair sources are crucial for scalable photonic quantum systems. Thin-film lithium niobate is a promising platform for on-chip photon-pair generation through spontaneous parametric down-conversion (SPDC). However, the device implementation faces practical challenges. Periodically poled lithium niobate (PPLN), despite enabling flexible quasi-phase matching, suffers from poor fabrication reliability and device repeatability, while conventional modal phase matching (MPM) methods yield limited efficiencies due to inadequate mode overlaps. Here, we introduce a layer-poled lithium niobate (LPLN) nanophotonic waveguide for efficient photon-pair generation. It leverages layer-wise polarity inversion through electrical poling to break spatial symmetry and significantly enhance nonlinear interactions for MPM, achieving a notable normalized second-harmonic generation (SHG) conversion efficiency of 4615% W−1cm−2. Through a cascaded SHG and SPDC process, we demonstrate photon-pair generation with a normalized brightness of 3.1 × 106 Hz nm−1 mW−2 in a 3.3 mm long LPLN waveguide, surpassing existing on-chip sources under similar operating configurations. Crucially, our LPLN waveguides offer enhanced fabrication reliability and reduced sensitivity to geometric variations and temperature fluctuations compared to PPLN devices. We expect LPLN to become a promising solution for on-chip nonlinear wavelength conversion and non-classical light generation, with immediate applications in quantum communication, networking, and on-chip photonic quantum information processing.

Spontaneous parametric downconversion photon pair generation in small footprint X-cut periodically poled lithium niobate micro-resonator.

Spontaneous parametric downconversion (SPDC) has been crucial for producing non-classical light, such as correlated photon pairs and squeezed states, essential for optical quantum technologies. Recently, thin-film lithium niobate (TFLN)-based devices have enabled high-performance SPDC in on-chip integrated photonic platforms. Here, we developed an X-cut periodically poled lithium niobate (PPLN) racetrack micro-resonator with a compact footprint and demonstrated bright SPDC photon pair generation characterized by distinct resonances and high extraction efficiency. We separately assessed the internal and loaded photon pair generation rates, measuring them at 4.525 MHz/µW and 62.73 kHz/µW, respectively. Our platform is integrated with maturing electro-/thermo-optic TFLN circuit elements and has meaningful potential for advancing active quantum photonic applications.

Nonclassical light in a three-waveguide coupler with second-order nonlinearity

Possible squeezed states generated in a three-waveguide nonlinear coupler operating with second harmonic generation is discussed. This study is carried out using two well-known techniques; the phase space method (based on positive-P representation) and the Heisenberg-based analytical perturbative (AP) method. The effects of key design parameters were investigated under various conditions, including full frequency matching, symmetrical and asymmetrical waveguide initialization, and both codirectional and contr-adirectional propagation. The system consistently produced long-lasting oscillatory squeezed states across all three waveguides, even when only one waveguide was pumped with coherent light while the others were in a vacuum state. Also, the performance and capacities of both methods are critically evaluated. For low levels of key design parameters and in the early stages of evolution, a high level of agreement between the two methods is noticed. In the new era of quantum-based technology, the proposed system opens a new avenue for utilising nonlinear couplers in nonclassical light generation.

Absence of quantum optical coherence in high harmonic generation

The optical phase of the driving field in the process of high harmonic generation and the coherence properties of the harmonics are fundamental concepts in attosecond physics. Here, we consider driving the process by incoherent classical and nonclassical light fields exhibiting an undetermined optical phase. With this, we introduce the notion of quantum optical coherence into high harmonic generation and show that high harmonics can be generated from incoherent radiation despite having a vanishing electric field. We explicitly derive the quantum state of the harmonics when driven by carrier-envelope phase unstable fields and show that the generated harmonics are incoherent and exhibit zero electric field amplitudes. We find that the quantum state of each harmonic is diagonal in its photon number basis, but nevertheless has the exact same photon statistics as the widely considered coherent harmonics. From this, we conclude that assuming coherent harmonic radiation can originate from a preferred ensemble fallacy. These findings have profound implications for attosecond experiments and how to infer the harmonic radiation properties. Published by the American Physical Society 2024

Realization of nonreciprocal photon statistics by manipulating the quantum nonlinearity of cold atoms in an asymmetric cavity.

In a strongly coupled cavity quantum electrodynamics (QED) system, the second-order correlation function g(2)(τ) of the transmitted probe light from the cavity is determined by the nonlinearity of the atom in the cavity. Therefore, the system provides a platform for controlling the photon statistics by manipulating nonlinearity. In this paper, we experimentally demonstrate nonreciprocal quantum statistics in a cavity QED system with several atoms strongly coupled to an asymmetric optical cavity, which is composed of two mirrors with different transmittivities. When the direction of the probe light is reversed, the intracavity light field alternates to a different level. Distinct photon statistics are then observed due to the quantum nonlinearity associated with strongly coupled atoms. Sub-Poissonian photon-number statistics for forward light and a Poissonian distribution for backward light are then realized. Our work provides an effective approach for realizing nonreciprocal quantum devices, which have potential applications in the unidirectional generation of nonclassical light fields and quantum sensing.

Optical Active Meta-Surfaces, -Substrates, and Single Quantum Dots Based on Tuning Organic Composites with Graphene.

In this communication, the design and fabrication of optical active metamaterials were developed by the incorporation of graphene and joining it to different substrates with variable spectroscopical properties. It focuses on how graphene and its derivatives could generate varied optical setups and materials considering modified and enhanced optics within substrates and surfaces. In this manner, it is discussed how light could be tuned and modified along its path from confined nano-patterned surfaces or through a modified micro-lens. In addition to these optical properties generated from the physical interaction of light, it should be added that the non-classical light pathways and quantum phenomena could participate. In this way, graphene and related carbon-based materials with particular properties, such as highly condensed electronics, pseudo-electromagnetic properties, and quantum and luminescent properties, could be incorporated. Therefore, the modified substrates could be switched by photo-stimulation with variable responses depending on the nature of the material constitution. Therefore, the optical properties of graphene and its derivatives are discussed in these types of metasurfaces with targeted optical active properties, such as within the UV, IR, and terahertz wavelength intervals, along with their further properties and respective potential applications.

Laser-written waveguide-integrated coherent spins in diamond

Quantum emitters, such as the negatively charged nitrogen-vacancy center in diamond, are attractive for quantum technologies, such as nano-sensing, quantum information processing, and as a non-classical light source. However, it is still challenging to position individual emitters in photonic structures while preserving the spin coherence properties of the defect. In this paper, we investigate single and ensemble waveguide-integrated nitrogen-vacancy centers in diamond fabricated by femtosecond laser writing followed by thermal annealing. Their spin coherence properties are systematically investigated and are shown to be comparable to native nitrogen-vacancy centers in diamond. This method paves the way for the fabrication of coherent spins integrated within photonic devices.

Acoustic wave-based single photon shifter for solid-state sources.

Controlling the frequency of nonclassical light is essential for the implementation of quantum computation, communication, and the integration of various quantum systems. However, there is a practical absence of easy-to-integrate frequency-shift devices for solid-state single-photon sources. Here, we propose an integrated single-photon frequency shifter that utilizes acousto-optic modulation. The device is composed of two interdigital transducers (IDTs) for generating acoustic waves on a lithium niobate on insulator (LNOI) platform, along with a silicon waveguide that is periodically positioned at the nodes of the acoustic wave to enhance the interaction length. We achieved a low half-wavelength voltage length product V π×L of 0.18 V cm. With a driving frequency of 129.7 MHz and a driving voltage of 10 V, a frequency shift of up to ± 405 GHz is realized with near-unity conversion efficiency. Our findings illustrate the feasibility of deterministic on-chip quantum spectral control, which is pivotal for constructing hybrid quantum networks.

Topological Fano-resonance with type-II and type-III corner states.

Topological corner states have been used to develop topologically robust Fano-resonant systems immune to structural perturbations while preserving the ultra-sensitive profiles under external factors. In this work, we have extended the possibility of obtaining Fano-resonant systems by introducing type-II and type-III corner states with a large modal surface to this class of resonance. Through photonic lattices with low symmetry, such as C2, it is easy to obtain type-II and type-III corner states due to the tailoring of long-range interactions. Subsequently, one can combine topological cavities of type-II and type-III corner modes with topological waveguides obtained from a first-order topological insulating phase. Our results may pave the way to generate devices suitable for creating non-classical light applicable in quantum computing and ultra-sensitive sensors employing large-area topological states.

Transport of non-classical light mediated by topological domain walls in a SSH photonic lattice

Advancements in photonics technologies have significantly enhanced their capability to facilitate experiments involving quantum light, even at room temperature. Nevertheless, fully integrating photonic chips that include quantum light sources, effective manipulation and transport of light minimizing losses, and appropriate detection systems remains an ongoing challenge. Topological photonic systems have emerged as promising platforms to protect quantum light properties during propagation, beyond merely preserving light intensity. In this work, we delve into the dynamics of non-classical light traversing a Su-Schrieffer-Heeger photonic lattice with topological domain walls. Our focus centers on how topology influences the quantum properties of light as it moves across the array. By precisely adjusting the spacing between waveguides, we achieve dynamic repositioning and interaction of domain walls, facilitating effective beam-splitting operations. Our findings demonstrate high-fidelity transport of non-classical light across the lattice, replicating known results that are now safeguarded by the topology of the system. This protection is especially beneficial for quantum communication protocols with continuous variable states. Our study enhances the understanding of light dynamics in topological photonic systems and paves the way for high-fidelity, topology-protected quantum communication.

Quantum catalysis in cavity quantum electrodynamics

Catalysis plays a key role in many scientific areas, most notably in chemistry and biology. Here we present a catalytic process in a paradigmatic quantum optics setup, namely the Jaynes-Cummings model, where an atom interacts with an optical cavity. The atom plays the role of the catalyst, and it allows for the deterministic generation of nonclassical light in the cavity. Considering a cavity prepared in a “classical” coherent state, and choosing appropriately the atomic state and the interaction time, we obtain an evolution with the following properties. First, the state of the cavity has been modified, and it now features nonclassicality, as witnessed by sub-Poissonian statistics or Wigner negativity. Second, the process is catalytic in the sense that the atom is deterministically returned to its initial state exactly, and it can be reused multiple times. What is more, we also show that our findings are robust under dissipation and can be applied to scenarios featuring cavity loss and atomic decay. Finally, we investigate the mechanism of this catalytic process, in particular highlighting the key role of correlations and quantum coherence. Published by the American Physical Society 2024

Multiphoton electron emission with non-classical light

Multiphoton electron emission with non-classical light

Light squeezing enhancement by coupling nonlinear optical cavities

In this paper, we explore the squeezing effect generated by two coupled optical cavities. Each cavity contains a second-order nonlinear material and coherently pumped by a laser. Our results show that light intensity is strongly improved due to the presence of the nonlinearities and mainly depends on the detunings between external laser frequencies and cavity modes. More interestingly, the proposed scheme could enhance light squeezing for moderate coupling between cavities : the squeezing generated by one cavity is enhanced by the other one. For resonant interaction, highest squeezing effect is obtained near resonance. When fields are non resonant, squeezing increases near resonance of the considered cavity, but decreases for large detunings relative to the second cavity. Further, when the dissipation rate of the second cavity is smaller than the first, the squeezing could be improved, attaining nearly the perfect squeezing. While the temperature elevation has a negative impact overall on the nonclassical light, squeezing shows an appreciable resistance against thermal baths for appropriate parameter sets.

Multimodal Spectroscopy Assays for Advanced Nano-Optics Approaches by Tuning Nano-Tool Surface Chemistry and Metal-Enhanced Fluorescence

In this research work, different chemical modifications were applied to gold nanoparticles and their use in enhanced non-classical light emitters based on metal-enhanced fluorescence (MEF) was evaluated. In order to achieve this, gold core–shell nanoparticles with silica shells were modified via multilayered addition and the incorporation of a covalently linked laser dye to develop MEF. Their inter-nanoparticle interactions were evaluated by using additional silica shell multilayers and modified cyclodextrin macrocycles. In this manner, the sizes and chemical surface interactions on the multilayered nanoarchitectures were varied. These optical active nanoplatforms led to the development of different nanoassembly sizes and luminescence behaviors. Therefore, the interactions and nanoassembly properties were evaluated by using various spectroscopic and nanoimaging techniques. Highly dispersible gold core–shell nanoparticles with diameters of 50–60 nm showed improved colloidal dispersion that led to single ultraluminescent gold core–shell nanoparticles with MEF. Then, the addition of variable silica lengths produced increased interactions and consequent nanoaggregation. However, the silanized nanoparticles were easily dispersible after agitation or sonication. Thus, their sizes were proportional only to the diameter and the van de Waals interaction did not affect their sizes in bulk. Then, the covalent linking of different concentrations of modified cyclodextrins was applied to the chemical surfaces by incorporating additional hydroxyl groups from the glucose monomeric unities of cyclodextrins. In this manner, variable larger-sized and inter-branched grafted gold core–shell silica nanoparticles were generated. The ultraluminescent properties were conserved due to the non-optical activity of the cyclodextrins. However, they generated enhanced ultraluminescence phenomena. Laser fluorescence microscopy nanoimaging showed enhanced resolutions in comparison to non-grafted supramolecular gold core–shell nanoparticles. The differences in their interactions and the sizes of the nanoassemblies were explained by their single nanoparticle diameters and the interacting chemical groups on their nanosurfaces. While the varied luminescence emissions generated were tuned by plasmonics, enhanced plasmonic phenomena and light scattering properties were seen depending on the type of nanoassembly. Thus, optically active and non-optically active materials led to different optical properties in the bright field and enhanced the excited state within the electromagnetic near-field of the gold nanotemplates. In this manner, it was possible to achieve high sensitivity by varying the spacer lengths and optical properties. Therefore, further perspectives regarding the design of nano-tools composed of light for various applications were discussed.

Nonclassical light generation and control from laser-driven semiconductor intraband excitations

Nonclassical light generation and control from laser-driven semiconductor intraband excitations

Polarization-Selective Enhancement of Telecom Wavelength Quantum Dot Transitions in an Elliptical Bullseye Resonator.

Semiconductor quantum dots are promising candidates for the generation of nonclassical light. Coupling a quantum dot to a device capable of providing polarization-selective enhancement of optical transitions is highly beneficial for advanced functionalities, such as efficient resonant driving schemes or applications based on optical cyclicity. Here, we demonstrate broadband polarization-selective enhancement by coupling a quantum dot emitting in the telecom O-band to an elliptical bullseye resonator. We report bright single-photon emission with a degree of linear polarization of 96%, Purcell factor of 3.9 ± 0.6, and count rates up to 3 MHz. Furthermore, we present a measurement of two-photon interference without any external polarization filtering. Finally, we demonstrate compatibility with compact Stirling cryocoolers by operating the device at temperatures up to 40 K. These results represent an important step toward practical integration of optimal quantum dot photon sources in deployment-ready setups.