Nonspecific Cell Adhesion Research Articles

Investigation of the Hydration of Nonfouling Material Poly(sulfobetaine methacrylate) by Low-Field Nuclear Magnetic Resonance

The strong surface hydration layer of nonfouling materials plays a key role in their resistance to nonspecific protein adsorption. Poly(sulfobetaine methacrylate) (polySBMA) is an effective material that can resist nonspecific protein adsorption and cell adhesion. About eight water molecules are tightly bound with one sulfobetaine (SB) unit, and additional water molecules over 8:1 ratio mainly swell the polySBMA matrix, which is obtained through the measurement of T(2) relaxation time by low-field nuclear magnetic resonance (LF-NMR). This result was also supported by the endothermic behavior of water/polySBMA mixtures measured by differential scanning calorimetry (DSC). Furthermore, by comparing both results of polySBMA and poly(ethylene glycol) (PEG), it is found that (1) the hydrated water molecules on the SB unit are more tightly bound than on the ethylene glycol (EG) unit before saturation, and (2) the additional water molecules after forming the hydration layer in polySBMA solutions show higher freedom than those in PEG. These results might illustrate the reason for higher resistance of zwitterionic materials to nonspecific protein adsorptions compared to that of PEGs.

Tailor-Made Quantum Dot and Iron Oxide Based Contrast Agents for in Vitro and in Vivo Tumor Imaging

The biofunctionalization of CdSe/CdS/ZnS quantum dots and Fe(3)O(4) nanocrystals using a novel ligand system based on polyisoprene-block-poly(ethylene oxide) ligands is described. The synthesis includes a partial ligand exchange of the hydrophobic nanocrystals with amino-functionalized polyisoprene ligands, followed by seeded micelle formation of the diblock-copolymers in water. The resulting water-soluble quantum dots showed fluorescence quantum efficiencies in the 40 to 50% range and extraordinary fluorescence stability in the biological environment after cross-linking of the polyisoprene moiety of the ligand shell. No toxicity was detected by water-soluble tetrazolium (WST8) and lactate dehydrogenase (LDH) assays, even at very high nanoparticle concentrations, and almost no nonspecific cell adhesion was detected. The ligand shell was further coupled to the antigen-related cell adhesion molecule (CEACAM) specific monoclonal antibody T84.1. The so-conjugated Fe(3)O(4) nanocrystals allowed in vitro and in vivo tumor targeting by magnetic resonance imaging.

Sequence, structure, and function of peptide self-assembled monolayers.

Cysteine is commonly used to attach peptides onto gold surfaces. Here we show that the inclusion of an additional linker with a length of four residues (-PPPPC) and a rigid, hydrophobic nature is a better choice for forming peptide self-assembled monolayers (SAMs) with a well-ordered structure and high surface density. We compared the structure and function of the nonfouling peptide EKEKEKE-PPPPC-Am with EKEKEKE-C-Am. Circular dichroism, attenuated total internal reflection Fourier transform IR spectroscopy, and molecular dynamics results showed that EKEKEKE-PPPPC-Am forms a secondary structure while EKEKEKE-C-Am has a random structure. Surface plasmon resonance sensor results showed that protein adsorption on EKEKEKE-PPPPC-Am/gold is very low with small variation while protein adsorption on EKEKEKE-C-Am/gold is high with large variation. X-ray photoelectron spectroscopy results showed that both peptides have strong gold-thiol binding with the gold surface, indicating that their difference in protein adsorption is due to their assembled structures. Further experimental and simulation studies were performed to show that -PPPPC is a better linker than -PC, -PPC, and -PPPC. Finally, we extended EKEKEKE-PPPPC-Am with the cell-binding sequence RGD and demonstrated control over specific versus nonspecific cell adhesion without using poly(ethylene glycol). Adding a functional peptide to the nonfouling EK sequence avoids complex chemistries that are used for its connection to synthetic materials.

Investigation of the Hydration of Nonfouling Material Poly(ethylene glycol) by Low-Field Nuclear Magnetic Resonance

The strong surface hydration layer of nonfouling materials plays a key role in their resistance to nonspecific protein adsorption. Poly(ethylene glycol) (PEG) is an effective example of materials that can resist nonspecific protein adsorption and cell adhesion. Thus, the strong interaction between water molecules and PEG was investigated through each T(2) component in water/PEG mixtures using multiexponential inversion of T(2) relaxation time measured by the Carr-Purcell-Meiboom-Gill (CPMG) sequence of low-field nuclear magnetic resonance (LF-NMR). Results show that about one water molecule is tightly bound with one ethylene glycol (EG) unit, and additional water molecules over 1:1 ratio mainly swell the PEG matrix and are not tightly bound with PEG. This result was also supported by the endothermic behavior of water/PEG mixtures measured by differential scanning calorimetry (DSC). It is believed that the method developed could be also applied to investigate various interactions between macromolecules and other small molecules without using deuterium samples, which might open a novel route to quantitatively measure guest-host interactions in the future.

Artificial Extracellular Matrix Proteins Containing Phenylalanine Analogues Biosynthesized in Bacteria Using T7 Expression System and the PEGylation

In vivo incorporation of phenylalanine (Phe) analogues into an artificial extracellular matrix protein (aECM-CS5-ELF) was accomplished using a bacterial expression host that harbors the mutant phenylalanyl-tRNA synthetase (PheRS) with an enlarged binding pocket. Although the Ala294Gly/Thr251Gly mutant PheRS (PheRS**) under the control of T5 promoter allows incorporation of some Phe analogues into a protein, the T5 system is not suitable for material science studies because the amount of materials produced is not sufficient due to the moderate strength of the T5 promoter. This limitation can be overcome by using a pair of T7 promoter and T7 RNA polymerase instead. In the T7 expression system, it is difficult, however, to achieve a high incorporation level of Phe analogues, due to competition of Phe analogues for incorporation with the residual Phe that is required for synthesis of active T7 RNA polymerase. In this study, we prepared the PheRS** under T7 promoter and optimized culture condition to improve both the incorporation level of recombinant aECM protein and the incorporation level of Phe analogues. Incorporation and expression levels tend to increase in the case of p-azidophenylalanine, p-iodophenylalanine, and p-acetylphenylalanine. We evaluated the lower critical transition temperature, which is dependent on the incorporation ratio and the turbidity decreased when the incorporation level increased. Circular dichromism measurement indicated that this tendency is based on conformational change from random coil to β-turn structure. We demonstrated that polyethylene glycol (PEG) can be conjugated at reaction site of Phe analogues incorporated. We also demonstrated that the increased hydrophilicity of elastin-like sequences in the aECM-CS5-ELF made by PEG conjugation could suppress nonspecific adhesion of human umbilical vein endothelial cells (HUVEC).

Carboxybetaine methacrylate polymers offer robust, long-term protection against cell adhesion.

Films of poly(carboxybetaine methacrylate), poly(CBMA), grafted onto microetched gold slides are effective in preventing nonspecific adhesion of cells of different types. The degree of adhesion resistance is comparable to that achieved with the self-assembled monolayers, SAMs, of oligo(ethylene glycol) alkanethiolates. In sharp contrast to the SAMs, however, substrates protected with poly(CBMA) can be stored in dry state without losing their protective properties for periods up to 2 weeks.

Albumin adsorption on unmodified and sulfonated polystyrene surfaces, in relation to cell–substratum adhesion

Albumin is commonly applied for blocking the adsorption of other proteins and to prevent the nonspecific adhesion of cells to diverse artificial substrata. Here we address the question of how effective these albumin properties are--by investigating unmodified and sulfonated polystyrene substrata with distinctly different wettabilities. As clearly shown with (125)I-radioisotopic assays, above a concentration of 10-20 μg/mL, the efficiency of bovine serum albumin (BSA) adsorption became markedly higher on the sulfonated surface than on the unmodified one. This study was assisted with the atomic force microscopy. On the unmodified surface, BSA, adsorbed from sufficiently concentrated solutions, formed a monolayer, with occasional intrusions of multilayered patches. Conversely, the arrangement of BSA on the sulfonated surface was chaotic; the height of individual molecules was lower than on the unmodified polystyrene. Importantly, the adhesion study of LNCaP and DU145 cells indicated that both surfaces, subjected to the prior BSA adsorption, did not completely loose their cell-adhesive properties. However, the level of adhesion and the pattern of F-actin organization in adhering cells have shown that cells interacted with unmodified and sulfonated surfaces differently, depending on the arrangement of adsorbed albumin. These results suggest the presence of some bare substratum area accessible for cells after the albumin adsorption to both types of investigated surfaces.

Bio-interface for Highly Sensitive Blood Analysis Chip

Developed blood analysis chips that provide a healthcare check at home are introduced. The electronic blood collection system employing a painless needle is a suitable system as a minimally-invasive technique. To obtain the high sensitivity of blood analysis, the non-specific protein adsorption and cell adhesion should be reduced. Several typed MPC (2-methacryloyloxyethyl phosphorylcholine) polymers with a function of protein adsorption resistance have been developed for the biocompatible materials as a surface modification of microchip. The bio-interface controlled using MPC polymers provides a highly sensitive blood analysis.

Adsorption of PEO–PPO–PEO triblock copolymers on a gold surface

Water-soluble triblock copolymers of Poly(ethylene oxide) and Poly(propylene oxide) (PEO n –PPO m –PEO n ) are nonionic amphiphilic macromolecules, commercially available under the names of Pluronics and Poloxamers. Recently interest has been focused on studying their roles in reducing nonspecific protein adsorption and cell adhesion on biomaterial/biosensor surfaces. Although the ability of the adsorbed PEO–PPO–PEO triblock copolymer to reduce protein adsorption has been observed frequently, its detailed mechanism of functioning is yet to be clarified. In order to delineate this detailed mechanism, one first needs to know the adsorption behavior of Pluronics on various substrates. Although gold is a commonly used substrate for the probes of various biosensors, there is no direct data reporting the adsorption behavior of Pluronics on it. In this study, we use surface plasma resonance (SPR) technique and Ellipsometry to detect the adsorption isotherms of various Pluronics on a gold surface. The adsorption isotherm of Pluronics of P103, P104 and F108 all exhibit two plateaus that corresponding to the desorption of the EO and the micellization in bulk solution. At bulk concentration of 1 × 10 −2 mg/ml, the total adsorbed amount of the copolymer increases with the increase of the molar mass of the polymer and with the decrease of the EO/PO ratio that suggests the strong influence of the hydrophobic PPO on the adsorbed amount of the polymer. At the CMC, the plateau value of adsorbed amount of Pluronics on Au is independent of molar mass and EO/PO ratio of copolymer. Protein adsorption on gold surfaces modified with various Pluronics shows good correlation between the amounts of protein adsorbed and the value of the reduced surface coverage, σ* of the Pluronic adlayer. In general, by increasing σ*, the nonspecific adsorption of human serum albumin can be reduced.

Impact of Epidermal Growth Factor Tethering Strategy on Cellular Response

In an effort to evaluate the impact of various epidermal growth factor (EGF) grafting strategies upon cell surface receptor activation and cell adhesion, we generated low-fouling surfaces by homogeneously grafting carboxymethylated dextran (CMD) on amino-coated glass substrate. By preventing nonspecific cell adhesion while providing reactive groups facilitating subsequent protein grafting, CMD allowed achieving specific cell/tethered EGF interactions and therefore deriving unambiguous conclusions about various EGF grafting strategies. We demonstrate here that A-431 cell response to immobilized EGF is highly dependent on the bioactivity of the tagged protein being tethered, its proper orientation, and its surface density. Among all the approaches we tested, the oriented tethering of fully bioactive EGF via a de novo-designed coiled-coil capture system was shown to be the most efficient. That is, it led to the most intense and sustained phosphorylation of EGF receptors as well as to strong A-431 cell adhesion, the latter being comparable to that observed with amino-coated surfaces in the absence of CMD.

Combined Influence of Substrate Stiffness and Surface Topography on the Antiadhesive Properties of Acr-sP(EO-stat-PO) Hydrogels

Biomaterials that prevent nonspecific protein adsorption and cell adhesion are of high relevance for diverse applications in tissue engineering and diagnostics. One of the most widely applied materials for this purpose is Poly(ethylene glycol) (PEG). We have investigated how micrometer line topography and substrate elasticity act upon the antiadhesive properties of PEG-based hydrogels. In our studies we apply bulk hydrogel cross-linked from star-shaped poly(ethylene oxide-stat-propylene oxide) macromonomers. Substrate surfaces were topographically patterned via replica molding. Additionally, the mechanical properties were altered by variations in the cross-linking density. Surface patterns with dimensions in the range of the cells' own size, namely 10 μm wide grooves, induced significant cell adhesion and spreading on the Acr-sP(EO-stat-PO) hydrogels. In contrast, there was only little adhesion to smaller and larger pattern sizes and no adhesion at all on the smooth substrates, regardless the rigidity of the gel. The effect of varied substrate stiffness on cell behavior was only manifest in combination with topography. Softer substrates with line patterns lead to significantly higher cell adhesion and spreading than stiff substrates. We conclude that the physical and mechanical surface characteristics can eliminate the nonadhesive properties of PEG-based hydrogels to a large extent. This has to be taken into account when designing surfaces for biomedical application such as scaffolds for tissue engineering which rely on the inertness of PEG.

Electrochemical Deposition and Surface-Initiated RAFT Polymerization: Protein and Cell-Resistant PPEGMEMA Polymer Brushes

This paper introduces a novel and versatile method of grafting protein and cell-resistant poly(poly ethylene glycol methyl ether methacrylate) (PPEGMEMA) brushes on conducting Au surface. The process started with the electrochemical deposition and full characterization of an electro-active chain transfer agent (CTA) on the Au surface. The electrochemical behavior of the CTA was investigated by cyclic voltammetry (CV) while the deposition and stability of the CTA on the surface were confirmed by ellipsometry, contact angle, and X-ray photoelectron spectroscopy (XPS). The capability of the electrodeposited CTA to mediate surface-initiated reversible addition-fragmentation chain transfer (SI-RAFT) polymerization on both the polymethyl methacrylate (PMMA; model polymer) and PPEGMEMA brushes was demonstrated by the increase in thicknesses of the films after polymerization. Contact angles also decreased with the incorporation of the more hydrophilic brushes. Significant changes in the morphologies of the films before and after polymerization were also observed with atomic force microscopy (AFM) analyses. Furthermore, XPS results showed an increase in the O 1s peak intensity relative to C 1s after polymerizations, which confirmed the grafting of polyethyleneglycol (PEG) bearing brushes. The ability of the PPEGMEMA-modified Au surface to resist nonspecific adhesion of proteins and cells was monitored and confirmed by XPS, ellipsometry, contact angle, AFM, and fluorescence imaging. The new method presented has potential application as robust protein and cell-resistant coatings for electrically conducting electrodes and biomedical devices.

Collagen-like polypeptide poly(Pro-Hyp-Gly) conjugated with Gly-Arg-Gly-Asp-Ser and Pro-His-Ser-Arg-Asn peptides enhances cell adhesion, migration, and stratification

Collagens are widely used in medical applications, including as a scaffold for tissue regeneration. However, animal-derived collagens have several drawbacks, such as low thermal stability, nonspecific cell adhesion, antigenicity, and contamination with pathogenic substances. To overcome these problems, we chemically synthesized the collagen-like polypeptide, poly(prolyl-hydroxyprolyl-glycyl) (poly(Pro-Hyp-Gly)), which forms a collagen-like triple-helical structure and shows biodegradability and biocompatibility. Here, we designed a novel scaffold where fibronectin-derived Gly Arg-Gly-Asp-Ser (GRGDS) and Pro-His-Ser-Arg-Asn (PHSRN) peptides were simultaneously conjugated with poly(Pro-Hyp-Gly). We assessed cell adhesion and migration activities using NIH3T3 cells in the scaffold and stratification ofimmortalized rabbit corneal epithelial cells. Cell adhesion was enhanced in scaffolds with GRGDS, increased with increasing amounts of conjugated GRGDS, and was significantly higher than bovine type I atelocollagen but lower than bovine fibronectin. Interestingly, simultaneous conjugation of GRGDS and PHSRN synergistically enhanced cell migration. Scaffolds containing almost equal amounts of GRGDS and PHSRN showed significantly higher cell migration than bovine type I atelocollagen. Addition of free GRGDS completely inhibited cell migration on the scaffold, whereas addition of free PHSRN partially inhibited cell migration. These results suggest that GRGDS plays a definitive role, and PHSRN plays an additional role, in cell migration. Conjugation of GRGDS resulted in the same level of stratification of rabbit corneal epithelial cells compared with bovine type I atelocollagen and bovine fibronectin. Because the simultaneous conjugation of GRGDS and PHSRN on poly(Pro-Hyp-Gly) enhances cell adhesion, migration, and stratification, it may be a useful scaffold for tissue regeneration.

Mechanical Force Affects Expression of an In Vitro Metastasis-Like Phenotype in HCT-8 Cells

Cancer deaths are primarily caused by metastases, not by the parent tumor. During metastasis, malignant cells detach from the parent tumor, and spread through the circulatory system to invade new tissues and organs. The physical-chemical mechanisms and parameters within the cellular microenvironment that initiate the onset of metastasis, however, are not understood. Here we show that human colon carcinoma (HCT-8) cells can exhibit a dissociative, metastasis-like phenotype (MLP) in vitro when cultured on substrates with appropriate mechanical stiffness. This rather remarkable phenotype is observed when HCT-8 cells are cultured on gels with intermediate-stiffness (physiologically relevant 21–47 kPa), but not on very soft (1 kPa) and very stiff (3.6 GPa) substrates. The cell-cell adhesion molecule E-Cadherin, a metastasis hallmark, decreases 4.73 ± 1.43 times on cell membranes in concert with disassociation. Both specific and nonspecific cell adhesion decrease once the cells have disassociated. After reculturing the disassociated cells on fresh substrates, they retain the disassociated phenotype regardless of substrate stiffness. Inducing E-Cadherin overexpression in MLP cells only partially reverses the MLP phenotype in a minority population of the dissociated cells. This important experiment reveals that E-Cadherin does not play a significant role in the upstream regulation of the mechanosensing cascade. Our results indicate, during culture on the appropriate mechanical microenvironment, HCT-8 cells undergo a stable cell-state transition with increased in vitro metastasis-like characteristics as compared to parent cells grown on standard, very stiff tissue culture dishes. Nuclear staining reveals that a large nuclear deformation (major/minor axis ratio, 2:5) occurs in HCT-8 cells when cells are cultured on polystyrene substrates, but it is markedly reduced (ratio, 1:3) in cells grown on 21 kPa substrates, suggesting the cells are experiencing different intracellular forces when grown on stiff as compared to soft substrates. Furthermore, MLP can be inhibited by blebbistatin, which inactivates myosin II activity and relaxes intracellular forces. This novel finding suggests that the onset of metastasis may, in part, be linked to the intracellular forces and the mechanical microenvironment of the tumor.

Covalently immobilized platelet-derived growth factor-BB promotes angiogenesis in biomimetic poly(ethylene glycol) hydrogels

The field of tissue engineering is severely limited by a lack of microvascularization in tissue engineered constructs. Biomimetic poly(ethylene glycol) hydrogels containing covalently immobilized platelet-derived growth factor BB (PDGF-BB) were developed to promote angiogenesis. Poly(ethylene glycol) hydrogels resist protein absorption and subsequent non-specific cell adhesion, thus providing a “blank slate”, which can be modified through the incorporation of cell adhesive ligands and growth factors. PDGF-BB is a key angiogenic protein able to support neovessel stabilization by inducing functional anastomoses and recruiting pericytes. Due to the widespread effects of PDGF in the body and a half-life of only 30 min in circulating blood, immobilization of PDGF-BB may be necessary. In this work bioactive, covalently immobilized PDGF-BB was shown to induce tubulogenesis on two-dimensional modified surfaces, migration in three-dimensional (3D) degradable hydrogels and angiogenesis in a mouse cornea micropocket angiogenesis assay. Covalently immobilized PDGF-BB was also used in combination with covalently immobilized fibroblast growth factor-2, which led to significantly increased endothelial cell migration in 3D degradable hydrogels compared with the presentation of each factor alone. When a co-culture of endothelial cells and mouse pericyte precursor 10T1/2 cells was seeded onto modified surfaces tubule formation was independent of surface modifications with covalently immobilized growth factors. Furthermore, the combination of soluble PDGF-BB and immobilized PDGF-BB induced a more robust vascular response compared with soluble PDGF-BB alone when implanted into an in vivo mouse cornea micropocket angiogenesis assay. Based on these results, we believe bioactive hydrogels can be tailored to improve the formation of functional microvasculature for tissue engineering.

Reduction of 3T3 fibroblast adhesion on SS316L by methyl-terminated SAMs

Inhibiting the non-specific adhesion of cells and proteins to biomaterials such as stents, catheters and guide wires is an important interfacial issue that needs to be addressed in order to reduce surface-related implant complications. Medical grade stainless steel 316L was used as a model system to address this issue. To alter the interfacial property of the implant, self-assembled monolayers of long chain phosphonic acids with –CH 3, –COOH, and –OH tail groups were formed on the native oxide surface of medical grade stainless steel 316 L. The effect of varying the tail groups on 3T3 fibroblast adhesion was investigated. The methyl-terminated phosphonic acid significantly prevented cell adhesion however presentation of hydrophilic tail groups at the interface did not significantly reduce cell adhesion when compared to the control stainless steel 316L.

Design and synthesis of a potent peptide containing both specific and non-specific cell-adhesion motifs

This article reports a potent chemical to promote cell adhesion on a substrate by combination of both moieties for specific and non-specific adhesion. The cyclic (–RGDfK–) (R: arginine, G: glycine, D: aspartic acid, f: d-phenylalanine, K: lysine) is employed to trigger specific cell adhesion, and a linear tripeptide KKK is introduced to enhance early non-specific cell adhesion. A series of cyclic and linear peptides with different charges were synthesized and then functionalized with thiol end-group. All the peptides were immobilized on gold layers, which were later passivated by bovine serum albumin. The coverage of NIH/3T3 fibroblast cells on the substrate modified by the linker containing both cyclic (–RGDfK–) and linear KKK is, surprisingly, significantly better than the summation using one of them, which reveals the strong cooperativity of specific and non-specific cell adhesions. The resultant cell adhesion on the substrates modified by appropriate linkers was much better than on tissue-culture plates. The cooperativity principle and the design strategy of the combined linker might be helpful for fundamental research of cell–material or cell–extracellular matrix interactions, and for modification of new biomaterials in regenerative medicine and targeted drug delivery.

Using Azobenzene‐Embedded Self‐Assembled Monolayers To Photochemically Control Cell Adhesion Reversibly

A celling point: A mixed self-assembled monolayer comprising two types of alkanethiols--one containing an azobenzene unit terminated with a peptide, the other containing a hexa(ethylene glycol) group that resists nonspecific cell adhesion--enables cell adhesion to be modulated photochemically. The reversible conversion of the azobenzene moiety between E and Z configurations allows the surface to either support or resist cell adhesion.

Role of E-Cadherin in Membrane-Cortex Interaction Probed by Nanotube Extrusion

This study aims to define the role of E-cadherin (Ecad) engagement in cell-cell contact during membrane-cortex interaction. As a tool, we used a hydrodynamic membrane tube extrusion technique to characterize the mechanical interaction between the plasma membrane and the underlying cortical cytoskeleton. Cells were anchored on 4.5 μm beads coated with polylysine (PL) to obtain nonspecific cell adhesion or with an antibody against Ecad to mimic specific Ecad-mediated cell adhesion. We investigated tube length dynamics L( t) over time and through successive extrusions applied to the cell at regular time intervals. A constant slow velocity was observed for the first extrusion, for PL-attached cells. Subsequent extrusions had two phases: an initial high-velocity regime followed by a low-velocity regime. Successive extrusions gradually weakened the binding of the membrane around the tube neck to the underlying cortical cytoskeleton. Cells specifically attached via Ecad first exhibited a very low extrusion velocity regime followed by a faster extrusion regime similar to nonspecific extrusion. This indicates that Ecad strengthens the membrane-cortical cytoskeleton interaction, but only in a restricted area corresponding to the site of contact between the cell and the bead. Occasional giant “cortex” tubes were extruded with specifically anchored cells, demonstrating that the cortex remained tightly bound to the membrane through Ecad-mediated adhesion at the contact site.

Cell interactions with hierarchically structured nano-patterned adhesive surfaces

The activation of well-defined numbers of integrin molecules in predefined areas by adhesion of tissue cells to biofunctionalized micro-nanopatterned surfaces was used to determine the minimum number of activated integrins necessary to stimulate focal adhesion formation. This was realized by combining micellar and conventional e-beam lithography, which enabled deposition of 6 nm large gold nanoparticles on predefined geometries. Patterns with a lateral spacing of 58 nm and a number of gold nanoparticles, ranging from 6 to 3000 per adhesive patch, were used. For α(v) β(3)-integrin activation, gold nanoparticles were coated with c(-RGDfK-)-thiol peptides, and the remaining glass surface was passivated to prevent non-specific protein adsorption and cell adhesion. Results show that focal adhesion formation is dictated by the underlying hierarchical nanopattern. Adhesive patches with side lengths of 3000 nm and separated by 3000 nm, or with side lengths of 1000 nm and separated by 1000 nm, containing approximately 3007 ± 193 or 335 ± 65 adhesive gold nanoparticles, respectively, induced the formation of actin-associated, paxillin-rich focal adhesions, comparable in size and shape to classical focal adhesions. In contrast, adhesive patches with side lengths of 500, 250 or 100 nm, and separated from adjacent adhesive patches by their respective side lengths, containing 83 ± 11, 30 ± 4, or 6 ± 1 adhesive gold nanoparticles, respectively, showed a significant increase in paxillin domain length, caused by bridging the pattern gap through an actin bundle in order to mechanically, synergistically strengthen each single adhesion site. Neither paxillin accumulation nor adhesion formation was induced if less than 6 c(-RGDfK-)-thiol functionalised gold nanoparticles per adhesion site were presented to cells.