Critical structures such as hospitals, high-precision manufacturing facilities, telecommunications centers, and fire stations, especially, need to maintain their functionality even during severe earthquakes. In this sense, seismic isolation technology serves as a vital design method for preserving their functionality. Seismic isolators, also known as earthquake isolation systems, are used to reduce the effects of earthquakes on buildings by isolating them from the ground they are located on. By ensuring that less acceleration and force demand is transmitted to the superstructure, both the building and the equipment and the devices in the building are prevented from being damaged by earthquakes. This experimental study aims to conduct vibration tests on a small-scale multi-story steel-building model equipped with a specially designed rolling-type seismic base isolation system. The relationship between the test model and the prototype was achieved by frequency simulation. The tests will be performed on a shake table under six different earthquake accelerations to examine the model’s dynamic behavior. The primary goal is to evaluate the isolation performance of the rolling-type seismic base isolator under seismic loads, with a focus on recording the vibrations at the top of the test building. It has been observed that the isolator placed at the base of the building significantly reduced the peak acceleration and displacement values of the floor motion. Under the most severe earthquake record applied to the shake table, the acceleration at the top of the building with the isolator was found to be reduced by approximately 50%, compared to the non-isolated case.