Non-decay Corrected Radiochemical Yield Research Articles

Automated production of [18F]SiTATE on a Scintomics GRP™ platform for PET/CT imaging of neuroendocrine tumors

Introduction[18F]SiTATE (formerly known as [18F]SiFAlin-TATE) was recently introduced as a highly promising imaging agent for the diagnosis of well-differentiated neuroendocrine tumors (NET) using positron emission tomography/computed tomography (PET/CT). A high tumor uptake and excellent image quality, the straightforward labeling approach, as well as the economic and logistic advantages of 18F- over 68Ga-labeled compounds predestinate [18F]SiTATE to become a potential new clinical reference standard. A novel state-of-the-art methodology of automated radiopharmaceutical production is required to establish [18F]SiTATE in clinical routine. This work illustrates the development of a novel synthesis procedure of [18F]SiTATE on an automated synthesis unit (ASU) and the clinical applicability of the tracer in human NET imaging. MethodsA new synthesis protocol was generated for the production of [18F]SiTATE on the Scintomics GRP™ platform for clinical NET imaging. The synthesis was carried out according to common Good Manufacturing Practice (GMP) guidelines including all quality control measurements. To confirm utility, clinical batches (n = 3) were produced and applied to six patients diagnosed with NET. Results[18F]SiTATE was obtained in 54 ± 4% (n = 3) non-decay corrected radiochemical yield (RCY), with a radiochemical purity of 96.3 ± 0.1% and a molar activity (Am) of 472 ± 45 GBq/μmol (n = 3). Quality control measurements always met the local release criteria. All specifications were taken or adapted from the Ph.Eur. regulations. PET/CT imaging with [18F]SiTATE produced on the GRP™ module confirmed the expected high image quality. The in vivo distribution pattern and excellent tumor to non-tumor contrast observed, matched the quality of the manually prepared [18F]SiTATE batches. ConclusionsThe automated manufacture of [18F]SiTATE was developed using the Scintomics GRP™ platform. The high quality of the radiotracer matched stringent quality control requirements adhering to common GMP guidelines, and its clinical applicability was confirmed by human PET/CT investigations. Advances in knowledge and implications for patient careThe automated process for the manufacture of [18F]SiTATE described herein represents an important contribution to make [18F]SiTATE routinely accessible for its use in clinical NET diagnosis.

Development of a fluorine-18 radiolabelled fluorescent chalcone: evaluated for detecting glycogen

BackgroundGlycogen is a multibranched polysaccharide of glucose produced by cells to store energy and plays a key role in cancer. A previously reported fluorescent probe (CDg4) was shown to selectively bind glycogen in mouse embryonic stem cells, however the molecule was not evaluated in cancer cells. We report the synthesis and biological evaluation of a dual-modality imaging probe based on CDg4, for positron emission tomography (PET) and fluorescence microscopy.ResultsA fluorine-18 radiolabelled derivative of CDg4, ([18F]5) for in vivo quantification of total glycogen levels in cancer cells was developed and synthesised in 170 min with a non-decay corrected radiochemical yield (RCY n.d.c) of 5.1 ± 0.9% (n = 4) in > 98% radiochemical purity. Compound 5 and [18F]5 were evaluated in vitro for their potential to bind glycogen, but only 5 showed accumulation by fluorescence microscopy. The accumulation of 5 was determined to be specific as fluorescent signal diminished upon the digestion of carbohydrate polymers with α-amylase. PET imaging in non-tumour bearing mice highlighted rapid hepato-biliary-intestinal elimination of [18F]5 and almost complete metabolic degradation after 60 min in the liver, plasma and urine, confirmed by radioactive metabolite analysis.ConclusionsFluorescent compound 5 selectively accumulated in glycogen containing cancer cells, identified by fluorescence microscopy; however, rapid in vivo metabolic degradation precludes further investigation of [18F]5 as a PET radiopharmaceutical.

Synthesis, in vitro and in vivo evaluation of 11C-O-methylated arylpiperazines as potential serotonin 1A (5-HT1A) receptor antagonist radiotracers

BackgroundSerotonin 1A (5-HT1A) receptors are implicated in the pathogenesis of several psychiatric and neurodegenerative disorders motivating the development of suitable radiotracers for in vivo positron emission tomography (PET) neuroimaging. The gold standard PET imaging agent for this target is [carbonyl-11C]WAY-100635, labeled via a technically challenging multi-step reaction that has limited its widespread use. While several antagonist and agonist-based PET radiotracers for 5-HT 1A receptors have been developed, their clinical translation has been hindered by methodological challenges and/or and non-specific binding. As a result, there is continued interest in the development of new and more selective 5-HT1A PET tracers having a relatively easier and reliable radiosynthesis process for routine production and with favorable metabolism to facilitate tracer-kinetic modeling. The purpose of the current study was to develop and characterize a radioligand with suitable characteristics for imaging 5-HT1A receptors in the brain. The current study reports the in vitro characterization and radiosyntheses of three candidate 5-HT1A receptor antagonists, DF-100 (1), DF-300 (2) and DF-400 (3), to explore their suitability as potential PET radiotracers.ResultsSyntheses of 1–3 and corresponding precursors for radiolabeling were achieved from isonicotinic, picolinic acid or picolino nitrile. In vitro binding studies demonstrated nanomolar affinity of the compounds for 5-HT1A receptors. Binding of 1–3 for other biogenic amines, neurotransmitter receptors, and transporters was negligible with the exception of moderate affinities for α1-adrenergic receptors (4–6-fold less potent than that for 5-HT1A receptor). Radioligands [11C]1–3 were efficiently prepared by 11C-O-methylation of the corresponding phenolic precursor in non-decay corrected radiochemical yields of 7–11% with > 99% chemical and radiochemical purities. Dynamic PET studies in rats demonstrated negligible brain uptake of [11C]1 and [11C]2. In contrast, significant brain uptake of [11C]3 was observed with an early peak SUV of 4–5. However, [11C]3 displayed significant off-target binding attributed to α1-adrenergic receptors based on regional distribution (thalamus>hippocampus) and blocking studies.ConclusionDespite efficient radiolabeling, results from PET imaging experiments limit the application of [11C]3 for in vivo quantification of 5-HT1A receptors. Nevertheless, derivatives of compound 3 may provide a scaffold for alternative PET radiotracers with improved selectivity for 5-HT 1A receptors or α1-adrenergic receptors.

Automated radiosynthesis of [11 C]UCB-J for imaging synaptic density by positron emission tomography.

An automated radiosynthesis of carbon‐11 positron emission tomography radiotracer [11C]UCB‐J for imaging the synaptic density biomarker synaptic vesicle glycoprotein SV2A was established using Synthra RNPlus synthesizer. Commercially available trifluoroborate UCB‐J analogue was used as a radiolabelling precursor, and the desired radiolabelled product was isolated in 11 ± 2% (n = 7) nondecay corrected radiochemical yield and formulated as a 10% EtOH solution in saline with molar activities of 20 to 100 GBq/μmol. The method was based upon the palladium(0)‐mediated Suzuki cross‐coupling reaction and [11C]CH3I as a radiolabelling synthon. The isolated product was cGMP compliant as demonstrated by the results of quality control analysis.

Automated two-step manufacturing of [11C]glyburide radiopharmaceutical for PET imaging in humans

IntroductionGlyburide is an approved anti-diabetes drug binding to the sulfonylurea receptors-1 (SUR-1) and substrate of solute carrier (SLC) transporters, which can be isotopically radiolabelled with carbon-11 for PET imaging. The aim of this work is to present an original and reproducible automated radiosynthesis of [11C]glyburide and a full European Pharmacopeia 9.7 compliant quality control to use [11C]glyburide in PET imaging clinical trials. MethodsDifferent conditions were explored to afford non-radioactive glyburide by one or two-step methylation. These experiments were monitored by UPLC-MS. The optimized process was applied to the automated radiosynthesis of [11C]glyburide using a TRACERlab® FX C Pro. A complete quality control according to Pharmacopeia guidelines was realized. ResultsOne-step methylation revealed regioselectivity issues as methylation occurred preferentially on the sulfonylurea moiety. Two-step approach by methylation followed by reaction with cyclohexyl isocyanate afforded glyburide without formation of methylated side products. Ready-to-inject [11C]glyburide was obtained in 5% non-decay corrected radiochemical yield and 110 ± 20 GBq/μmol molar activity within 40 min (n = 8). [11C]Glyburide quality control was compliant with the Pharmacopeia requirements. ConclusionsWe have described a highly reproducible and automated two-step radiosynthesis of [11C]glyburide which was qualified as a radiopharmaceutical for human injection. This whole manufacturing process is currently being used to conduct a clinical trial to elucidate the hepatic transport of drugs. Advances in knowledgeCompared to previously reported radiosynthesis of [11C]glyburide, this work provides an original and reproducible approach which can be transferred to any PET centre interested in using this radiotracer for preclinical or clinical imaging. Implication for patient careThis work provides a method to manufacture [11C]glyburide for human PET imaging. This radiopharmaceutical could be used to elucidate the role of transporters in drug exposure of different organs or to monitor brain recovery after central nervous system (CNS) injuries.

"In-loop" 18 F-fluorination: A proof-of-concept study.

There is a great demand to develop more cost-efficient and robust manufacturing processes for fluorine-18 (18 F) labelled compounds and radiopharmaceuticals. Herein, we present to our knowledge the first radiofluorination "in-loop," where [18 F]triflyl fluoride was used as the labelling agent. Initial development of the "in-loop" [18 F]fluorination method was optimized by reacting [18 F]triflyl fluoride with 1,4-dinitrobenzene to form [18 F]1-fluoro-4-nitrobenzene. This methodology was then applied for the syntheses of two well-known radiopharmaceuticals, namely, [18 F]T807 for imaging of tau protein and [18 F]FEPPA for imaging the translocator protein 18 KDa. Both radiotracers were synthesized and formulated using an automated radiosynthesis module with nondecay corrected radiochemical yields of 27% and 29% (relative [18 F]F- ), respectively. The overall syntheses times for [18 F]T807 and [18 F]FEPPA were 65 and 55 minutes, respectively. In these cases, our "in-loop" radiofluorination methodology enabled us to obtain equal or superior yields compared with conventional reactions in a vial. The radiochemical purities were more than 99%, and the molar activities were more than 350 GBq/μmol at the end-of-synthesis for both radiotracers. This novel method is simple, efficient, and allows for a reliable production of radiofluorinated compounds and radiopharmaceuticals.

18F]FEPPA a TSPO Radioligand: Optimized Radiosynthesis and Evaluation as a PET Radiotracer for Brain Inflammation in a Peripheral LPS-Injected Mouse Model.

[18F]FEPPA is a specific ligand for the translocator protein of 18 kDa (TSPO) used as a positron emission tomography (PET) biomarker for glial activation and neuroinflammation. [18F]FEPPA radiosynthesis was optimized to assess in a mouse model the cerebral inflammation induced by an intraperitoneal injection of Salmonella enterica serovar Typhimurium lipopolysaccharides (LPS; 5 mg/kg) 24 h before PET imaging. [18F]FEPPA was synthesized by nucleophilic substitution (90 °C, 10 min) with tosylated precursor, followed by improved semi-preparative HPLC purification (retention time 14 min). [18F]FEPPA radiosynthesis were carried out in 55 min (from EOB). The non-decay corrected radiochemical yield were 34 ± 2% (n = 17), and the radiochemical purity greater than 99%, with a molar activity of 198 ± 125 GBq/µmol at the end of synthesis. Western blot analysis demonstrated a 2.2-fold increase in TSPO brain expression in the LPS treated mice compared to controls. This was consistent with the significant increase of [18F]FEPPA brain total volume of distribution (VT) estimated with pharmacokinetic modelling. In conclusion, [18F]FEPPA radiosynthesis was implemented with high yields. The new purification/formulation with only class 3 solvents is more suitable for in vivo studies.

N-(4-[18F]fluorobenzyl)cholylglycine, a novel tracer for PET of enterohepatic circulation of bile acids: Radiosynthesis and proof-of-concept studies in rats

IntroductionEnterohepatic circulation (EHC) of conjugated bile acids is an important physiological process crucial for regulation of intracellular concentrations of bile acids and their function as detergents and signal carriers. Only few bile acid-derived imaging agents have been synthesized and hitherto none have been evaluated for studies of EHC. We hypothesized that N-(4-[18F]fluorobenzyl)cholylglycine ([18F]FBCGly), a novel fluorine-18 labeled derivative of endogenous cholylglycine, would be a suitable tracer for PET of the EHC of conjugated bile acids, and we report here a radiosynthesis of [18F]FBCGly and a proof-of-concept study by PET/MR in rats. MethodsA radiosynthesis of [18F]FBCGly was developed based on reductive alkylation of glycine with 4-[18F]fluorobenzaldehyde followed by coupling to cholic acid. [18F]FBCGly was investigated in vivo by dynamic PET/MR in anesthetized rats; untreated or treated with cholyltaurine or rifampicin. Possible in vivo metabolites of [18F]FBCGly were investigated by analysis of blood and bile samples, and the stability of [18F]FBCGly towards enzymatic de-conjugation by Cholylglycine Hydrolase was tested in vitro. Results[18F]FBCGly was produced with a radiochemical purity of 96% ± 1% and a non-decay corrected radiochemical yield of 1.0% ± 0.3% (mean ± SD; n = 12). PET/MR studies showed that i.v.-administrated [18F]FBCGly underwent EHC within 40–60 min with a rapid transhepatic transport from blood to bile. In untreated rats, the radioactivity concentration of [18F]FBCGly was approximately 15 times higher in bile than in liver tissue. Cholyltaurine and rifampicin inhibited the biliary secretion of [18F]FBCGly. No fluorine-18 metabolites of [18F]FBCGly were observed. ConclusionWe have developed a radiosynthesis of a novel fluorine-18 labeled bile acid derivative, [18F]FBCGly, and shown by PET/MR that [18F]FBCGly undergoes continuous EHC in rats without metabolizing. This novel tracer may prove useful in PET studies on the effect of drugs or diseases on the EHC of conjugated bile acids.

Copper(II)-Mediated [11C]Cyanation of Arylboronic Acids and Arylstannanes.

A copper-mediated method for the transformation of diverse arylboron compounds and arylstannanes to aryl-[11C]-nitriles is reported. This method is operationally simple, uses commercially available reagents, and is compatible with a wide variety of substituted aryl- and heteroaryl substrates. This method is applied to the automated synthesis of high specific activity [11C]perampanel in 10% nondecay-corrected radiochemical yield (RCY).

Automated synthesis of [68Ga]oxine, improved preparation of 68Ga-labeled erythrocytes for blood-pool imaging, and preclinical evaluation in rodents.

Radiolabeled erythrocytes have multiple applications in nuclear medicine, including blood pool imaging. Historically they have been labeled with SPECT radionuclides. A PET blood pool imaging agent is highly desirable as it would improve clinical applications with better image quality and resolution, higher sensitivity, and dynamic scanning capabilities. With the coming of age of modern 68Ge/68Ga generator systems, gallium-68 is now widely accessible. In this paper we describe an updated method for the preparation of 68Ga-labeled erythrocytes and their preliminary use in rodent blood pool imaging. A novel automated synthesis of [68Ga]oxine using a 68Ga/68Ge generator and automated synthesis module is reported. [68Ga]Oxine was synthesized in 50 ± 5% (n = 3) non-decay corrected radiochemical yield and >99% radiochemical purity. Rat and human erythrocytes were successfully labeled with the complex in 42% RCY, and the 68Ga-labeled erythrocytes have been shown to clearly image the blood pool in a healthy rat. Human erythrocytes labelled with [68Ga]oxine were shown to be viable up to 2 hours post-labelling, and washout of the radiolabel was minimal up to 1 hour post-labelling. Further optimization of the labeling method to translate for use in human cardiac and oncologic blood pool PET imaging studies, is underway.

(18)F]Fluoroethyl Triazole Substituted PSMA Inhibitor Exhibiting Rapid Normal Organ Clearance.

Prostate-specific membrane antigen (PSMA) is overexpressed in the epithelium of prostate cancer and nonprostate solid tumor neovasculature. PSMA is increasingly utilized as a target for cancer imaging and therapy. Here, we report the synthesis and in vivo biodistribution of a low-molecular-weight PSMA-based imaging agent, 2-[3-(1-carboxy-5-{3-[1-(2-[(18)F]fluoroethyl)-1H-1,2,3-triazol-yl]propanamido}pentyl)ureido]pentanedioic acid ([(18)F]YC-88), containing an [(18)F]fluoroethyl triazole moiety. [(18)F]YC-88 was synthesized from 2-[(18)F]fluoroethyl azide and the corresponding alkyne precursor in two steps using either a one- or two-pot procedure. Biodistribution and positron emission tomography (PET) imaging were performed in immunocompromised mice using isogenic PSMA(+) PC3 PIP and PSMA(-) PC3 flu xenografts. YC-88 exhibited high affinity for PSMA as evidenced by a Ki value of 12.9 nM. The non-decay corrected radiochemical yields of [(18)F]YC-88 averaged 14 ± 1% (n = 5). Specific radioactivities ranged from 320 to 2,460 Ci/mmol (12-91 GBq/μmol) with an average of 940 Ci/mmol (35 GBq/μmol, n = 5). In an immunocompromised mouse model, [(18)F]YC-88 clearly delineated PSMA(+) PC3 PIP prostate tumor xenografts on imaging with PET. At 1 h postinjection, 47.58 ± 5.19% injected dose per gram of tissue (% ID/g) was evident within the PSMA(+) PC3 PIP tumor, with a ratio of 170:1 of uptake within PSMA(+) PC3 PIP to PSMA(-) PC3 flu tumor placed in the opposite flank. The tumor-to-kidney ratio at 2 h postinjection was 4:1. At or after 30 min postinjection, minimal nontarget tissue uptake of [(18)F]YC-88 was observed. Compared to [(18)F]DCFPyL, which is currently in clinical trials, the uptake of [(18)F]YC-88 within the kidney, liver, and spleen was significantly lower at all time-points studied. At 30 min and 1 h postinjection, salivary gland uptake of [(18)F]YC-88 was significantly less than that of [(18)F]DCFPyL. [(18)F]YC-88 is a new PSMA-targeted PET agent synthesized utilizing click chemistry that demonstrates high PSMA(+) tumor uptake in a xenograft model. Because of its low uptake in the kidney, rapid clearance from nontarget organs, and relatively simple one-pot, two-step radiosynthesis, [(18)F]YC-88 is a viable new PET radiotracer for imaging PSMA-expressing lesions.

Radiosynthesis and ‘click’ conjugation of ethynyl‐4‐[18F]fluorobenzene — an improved [18F]synthon for indirect radiolabeling

Reproducible methods for [(18)F]radiolabeling of biological vectors are essential for the development of new [(18)F]radiopharmaceuticals. Molecules such as carbohydrates, peptides and proteins are challenging substrates that often require multi-step indirect radiolabeling methods. With the goal of developing more robust, time saving, and less expensive procedures for indirect [(18)F]radiolabeling of such molecules, our group has synthesized ethynyl-4-[(18)F]fluorobenzene ([(18)F]2, [(18)F]EYFB) in a single step (14 ± 2% non-decay corrected radiochemical yield (ndc RCY)) from a readily synthesized, shelf stable, inexpensive precursor. The alkyne-functionalized synthon [(18)F]2 was then conjugated to two azido-functionalized vector molecules via CuAAC reactions. The first 'proof of principle' conjugation of [(18)F]2 to 1-azido-1-deoxy-β-D-glucopyranoside (3) gave the desired radiolabeled product [(18)F]4 in excellent radiochemical yield (76 ± 4% ndc RCY (11% overall)). As a second example, the conjugation of [(18)F]2 to matrix-metalloproteinase inhibitor (5), which has potential in tumor imaging, gave the radiolabeled product [(18)F]6 in very good radiochemical yield (56 ± 12% ndc RCY (8% overall)). Total preparation time for [(18)F]4 and [(18)F]6 including [(18)F]F(-) drying, two-step reaction (nucleophilic substitution and CuAAC conjugation), two HPLC purifications, and two solid phase extractions did not exceed 70 min. The radiochemical purity of synthon [(18)F]2 and the conjugated products, [(18)F]4 and [(18)F]6, were all greater than 98%. The specific activities of [(18)F]2 and [(18)F]6 were low, 5.97 and 0.17 MBq nmol(-1), respectively.

Simple preparation of new [(18) F]F-labeled synthetic amino acid derivatives with two click reactions in one-pot and SPE purification.

New [(18) F]fluorinated 1,2,3-triazolyl amino acid derivatives were efficiently prepared from Huisgen 1,3-dipolar cycloaddition reactions, well known as click reaction. We developed two simultaneous click reactions in one-pot with a simple solid-phase extraction (SPE) purification method. [(18) F]fluoro-1-propyne was obtained at a 45% non-decay corrected radiochemical yield based on the [(18) F]fluoride ion. The one-pot and simultaneous two click reactions were performed with unprotected azido-alkyl amino acid, [(18) F]fluoro-1-propyne, and lipophilic additive alkyne to produce three synthetic amino acid derivatives, AMC-101 ([(18) F]-6a), AMC-102 ([(18) F]-6b), and AMC-103 ([(18) F]-6c) with 29%, 28%, and 24% of non-decay corrected radiochemical yields, respectively. All radiotracers indicated that radiochemical purities were >95% without any residual organic solvent. Our new method involving two click reactions in one-pot showed high radiochemical and chemical purity by easy removal of the residual precursor from the simultaneous two click reactions.

Automated radiosynthesis of GMP quality [18F]HX4 for PET imaging of hypoxia

Introduction[18F]HX4 is a 2-nitroimidazole based investigational radiotracer for imaging hypoxia. MethodsA two-step, one-pot synthetic procedure was developed on a GE Tracerlab MX-FDG with a disposable cassette. Nucleophilic substitution of a nosylate group with [18F]fluoride was followed by solvent evaporation and acidic removal of the acetyl protecting group. HPLC purification in a bio-compatible solvent mixture was developed. Results and conclusionsUsing starting activities of 80–110GBq [18F]fluoride, GMP compliant [18F]HX4 was produced in non-decay corrected radiochemical yields of 12±3% (n=9) in 55min including HPLC purification. No reformulation steps were required. The mean specific activity of the final product was 2450GBq/μmol. Modifications to the process and final formulation were included to prevent decomposition of the product, and these changes resulted in an improved stability of the formulated [18F]HX4, with a shelf-life of at least 8h post-synthesis. The product consistently passed all required quality control tests to determine that the [18F]HX4 was suitable for clinical use. Using a 90minute target bombardment, and 80–110GBq starting [18F]fluoride, the method produced multiple patient doses.

Synthesis and evaluation of (18)F-labeled bile acid compound: a potential PET imaging agent for FXR-related diseases.

The farnesoid-X-receptor (FXR) is a member of the nuclear hormone receptor superfamily. The FXR has critical functions in maintaining bile acid synthesis and homeostasis, liver regeneration and tumorigenesis, intestinal diseases, intestinal tumorigenesis, cholesterol gallstone disease, cholestasis, and atherosclerosis. FXR expression is strongly downregulated in liver fibrosis, hepatocellular adenoma and hepatocellular carcinoma compared to expression levels in adjacent normal tissues. Chenodeoxycholic acid (CDCA) is the most potent physiological ligand for FXR. CDCA was radiolabeled with (18)F based on the efficiency click reaction of 1,3-dipolar cycloaddition of terminal alkynes and organic azides for noninvasively evaluating the relationship between FXR and FXR-related disease. The PET tracer [(18)F]8 was produced by 'click' labeling and showed a high non-decay corrected radiochemical yield (end of synthesis (EOS) yield=42±3% (n=5) from aqueous [(18)F]fluoride), high radiochemical purity ( >99%), and high specific activity (>320GBq/μmol). [(18)F]8 had a high metabolic stability in vitro and in vivo. PET imaging studies in nude mice indicated a rapid uptake of the tracer into liver tissue with uniform distribution of radioactivity in the liver. Significant accumulation of radioactivity was found in the liver, gallbladder, and intestine, while no obvious uptake was observed in other organs, such as the bladder, heart, and brain. Thus, this PET tracer represents a novel tool for early detection of abnormalities in the liver and staging of neoplasms.

Synthesis of a new fluorine‐18 glycosylated ‘click’ cyanoquinoline for the imaging of epidermal growth factor receptor

This study reports the radiosynthesis of a new fluorine-18 glycosylated 'click' cyanoquinoline [(18) F]5 for positron emission tomography imaging of epidermal growth factor receptor (EGFR). The tracer was obtained in 47.7 ± 7.5% (n = 3) decay-corrected radiochemical yield from 2-[(18) F]fluoro-2-deoxy-β-d-glucopyranosyl azide, and the overall nondecay-corrected radiochemical yield from aqueous fluoride was 8.6 ± 2.3% (n = 3). An in vitro preliminary cellular uptake study showed selectivity of the tracer for EGFR-positive A431 cell lines versus EGFR-negative MCF-7 cell lines. [(18) F]5 tracer uptake in A431 cells was significantly reduced by addition of the cold isotope analogue compound 5.

A practical synthesis of [18F]FtRGD: an angiogenesis biomarker for PET

Integrins have become increasingly attractive targets for molecular imaging of angiogenesis with positron emission tomography or single-photon emission computed tomography, but the reliable production of radiopharmaceuticals remains challenging. A strategy for chemoselective labeling of the integrin ligand-c(RGDyK) peptide-has been developed on the basis of the Cu(I)-catalyzed conjugation reaction. Recently, we reported a nucleophilic detagging and fluorous solid-phase extraction method providing an easy way to implement an approach for obtaining 2-[(18) F]fluoroethyl azide. In this work, we report the practical use of this method for the preparation of the 2-[(18) F]fluoroethyl-triazolyl conjugated c(RGDyK) peptide: [(18) F]FtRGD. The two-step, two-pot synthesis, HPLC purification, and reformulation could be readily performed with a standard nucleophilic radiofluorination synthesizer (GE TRACERlab FXFN ), with minimal modifications. [(18) F]FtRGD was obtained in a solution for injection (>500 MBq/mL) in 10-30% nondecay-corrected radiochemical yield, excellent radiochemical purity (>98%), and 28 ± 13 GBq/µmol specific activity. [(18) F]FtRGD (Ki = 54 ± 14 nM for αV β3 and 1.7 ± 0.2 nM for αV β5 ) was evaluated in mice and showed good stability in vivo, good tumor-to-background ratio (1.6 ± 0.3 %ID/g at 1.5 h post-injection in U87-MG tumors), and rapid urinary excretion. Therefore, [(18) F]FtRGD proved valuable for preclinical positron emission tomography imaging of integrin expression.

Radiosynthesis of C‐11 labeled auxin (3‐indolyl[1‐11C]acetic acid) and its derivatives from gramine

Abstract3‐Indolylacetic acid (IAA) is the major auxin in higher plants and plays a key role in plant growth and development. We report the rapid radiolabeling of the important plant hormone using carbon‐11 (half life: 20.4 min) enabling in vivo imaging of its distribution and movement in whole plants. 3‐Indolyl[1‐11C]acetic acid was synthesized in 2‐steps: (1) reaction of gramine with [11C]cyanide to give 3‐indolyl[1‐11C]acetonitrile in >99% radiochemical purity; (2) hydrolysis of the intermediate in aqueous sodium hydroxide solution to give 3‐indolyl[1‐11C]acetic acid in >98% radiochemical purity after HPLC purification. The overall nondecay corrected radiochemical yield was 28%, synthesis time was 68 min and specific activity was (0.7 mCi/nmol). Hydrolysis proceeded through the formation of 3‐indolyl[1‐11C]acetamide and by varying the temperature of this step, either C‐11 labeled acid or amide were obtained. This procedure provides unexpectedly high C‐11 incorporation in a short time and using a simple and selective hydrolysis without the need of an indole‐nitrogen protecting group or a typical leaving group. Since 3‐indolylacetonitrile and 3‐indolylacetamide are also intermediates in the biosynthesis of IAA, and also function as auxins, this versatile reaction makes all three of these labeled compounds available for imaging studies in whole plants in vivo. Copyright © 2011 John Wiley & Sons, Ltd.

Use of 2-[18F]fluoroethylazide for the Staudinger ligation – Preparation and characterisation of GABAA receptor binding 4-quinolones

The labelling reagent 2-[18F]fluoroethylazide was used in a traceless Staudinger ligation. This reaction was employed to obtain the GABAA receptor binding 6-benzyl-4-oxo-1,4-dihydro-quinoline-3-carboxylic acid (2-[18F]fluoroethyl) amide. The radiotracer was prepared with a non-decay corrected radiochemical yield of 7%, a radiochemical purity >95% and a specific radioactivity of 0.9GBq/μmol. The compound showed low brain penetration in normal rats. A series of fluoroalkyl 4-quinolone analogues with nanomolar to sub-nanomolar affinity for the GABAA receptor has been prepared as well.