Nonaqueous Capillary Zone Electrophoresis Research Articles

Nonaqueous Capillary Zone Electrophoresis for Polyesters and Polyamides Using Hexafluoroisopropyl Alcohol as Electrophoretic Medium

Nonaqueous capillary zone electrophoresis (NACZE) utilizing cationic reagents as an electrophoresis promoter has the potential for separating water-insoluble synthetic polymers and that with tetrahydrofuran based electrophoretic media containing cationic reagents has been reported. In this study, NACZE using hexafluoroisopropyl alcohol (HFIP)-based media was developed for separating polyesters and polyamides, which were insoluble in tetrahydrofuran. Nonaqueous media of HFIP containing 400 mM cetyltrimethylammonium chloride (CTAC) and 50 mM trihexyl(tetradecyl)phosphonium chloride (P66614Cl) were used, and it was found that hydrophobic P66614 cation enhanced the electrophoresis of both polyesters and polyamides compared with cetyltrimethylammonium cation. The media containing CTAC resulted in partially separated poly(ethylene terephthalate)/poly(hexamethylene terephthalate) and poly(ethylene terephthalate)/poly(ethylene naphthalate), but P66614Cl failed to separate them. By contrast, nylon 6I and nylon 6/6I were separated with the P66614Cl media, whereas they were co-eluted in the media with CTAC.

Electrophoretic Behavior in Nonaqueous Capillary Zone Electrophoresis Using Tetrahydrofuran-Based Ternary Nonaqueous Solutions

Nonaqueous capillary electrophoresis has the potential to separate water-insoluble analytes. Previously, we reported the separation of water-insoluble and neutral synthetic polymers in nonaqueous capillary zone electrophoresis using tetrahydrofuran (THF)-based ternary nonaqueous solutions. In this paper, the effect of the composition of a THF-based ternary solution (THF, acetonitrile, and methanol) containing cetyltrimethylammonium chloride (CTAC) on electrophoretic behavior is investigated using small organic compounds as prove analytes. In addition to general electrophoretic parameters such as electrophoretic mobility, analytical stability was also evaluated. The electric current, electrophoretic mobility of the benzyltriethylammonium cation (ion pair formation with chloride anion), and electrophoretic mobility of coronene (solvophobic interaction with the CTA cation) were dominated mainly by the THF content, and lower THF content resulted in higher values. In contrast, electroosmotic mobility was enhanced by an increase in THF content and was affected mainly by methanol content. Interestingly, in addition to stable electropherograms, we observed instable (fluctuation of baseline or zero current) electropherograms, which were obtained irregularly. Although a notable relation between the composition and the instable behavior was not observed, it is suggested that this “discontinuous instability” is related with the composition distribution (heterogeneous composition) of the ternary solvents in a capillary. Increasing the temperature effectively suppressed the composition distribution and has the potential to decrease the risk of instable behavior.

Effect of surfactant species and electrophoretic medium composition on the electrophoretic behavior of neutral and water-insoluble linear synthetic polymers in nonaqueous capillary zone electrophoresis.

We have recently demonstrated the separation of neutral and water-insoluble linear synthetic polymers in nonaqueous capillary zone electrophoresis (NACZE) using a cationic surfactant of cetyltrimethylammonium chloride (CTAC). In this study, eight ionic surfactants were investigated for the separation of four synthetic polymers (polystyrene, polymethylmethacrylates, polybutadiene, and polycarbonate); only three surfactants (CTAC, dimethyldioctadecylammonium bromide, and sodium dodecylsulfate) caused their separation. The order of the interaction between the polymers and the surfactants depended on both the surfactant species and the composition of the electrophoretic medium. Their investigation revealed that the separation is majorly affected by the hydrophobic interactions between the polymers and the ionic surfactants. In addition, the electrophoretic behavior of polycarbonate suggested that electrostatic interaction also affects the selectivity of the polymers.

Separation of Water-Insoluble and Neutral Linear Synthetic Polymers in Nonaqueous Capillary Zone Electrophoresis Using Phosphonium-Based Ionic Liquid

Separation of Water-Insoluble and Neutral Linear Synthetic Polymers in Nonaqueous Capillary Zone Electrophoresis Using Phosphonium-Based Ionic Liquid

Separation of linear synthetic polymers in non-aqueous capillary zone electrophoresis using cationic surfactant

A method for separating water-insoluble and neutral synthetic polymers using non-aqueous capillary zone electrophoresis (NACZE) was developed. The non-aqueous solvent system comprising a mixture of tetrahydrofuran, acetonitrile, and ethanol containing cetyltrimethylammonium chloride was used for solubilizing and conferring positive charges to the polymers. A mixture of polystyrene (PS, Mn=6500) and polybutadiene (PBD, Mn=5900) was successfully separated by the NACZE method using cationic surfactants. Evaluation of the effect of the molecular weight of the polymers on the electrophoretic behavior demonstrated that PSs with different molecular weights (Mn=6500, 10,200, 19,600, 200,000) were co-eluted as a single peak. That is, the apparent electrophoretic mobility of the PSs was independent of the molecular weight. In contrast, evaluation of PBD and polycarbonate (PC) demonstrated that the solubility of polymers in the medium affected the apparent electrophoretic mobility of the polymers, where low solubility resulted in reduced apparent electrophoretic mobility. Using the proposed method, poly(styrene-co-methylmethacrylate)s with different compositions were successfully separated.

Evaluation of Non-aqueous Capillary Zone Electrophoresis for the Determination of Histamine H2 Receptor Antagonists in Pharmaceuticals

A new non-aqueous capillary electrophoresis method is proposed for the separation and simultaneous determination of cimetidine, ranitidine, roxatidine, nizatidine and famotidine by using a 30-cm long × 75 µm i.d. fused silica capillary and UV detection at 214 nm. Using a temperature of 25°C, an applied voltage of 15 kV, and a background electrolyte consisting of methanol containing 10 mM ammonium acetate and 0.2% acetic acid allowed the analytes to be separated in less than 4 min. The limits of detection obtained ranged from 7 and 17 µg L(-1). The proposed method was successfully used to determine the analytes in pharmaceutical preparations and its results were checked against an HPLC method.

Analyte and system eigenpeaks in nonaqueous capillary zone electrophoresis: Theoretical description and experimental confirmation with methanol as solvent

A mathematical model developed for aqueous solutions and adapted to methanol as solvent was applied to predict the electromigration characteristics of analytes and background electrolytes in capillary zone electrophoresis. These characteristics are the effective mobility, and the tendency of the analyte to undergo peak-broadening due to electromigration dispersion. The input parameters for calculation like limiting mobilities and dissociation constants were experimentally determined or taken from the literature. By the aid of the model, the molar response for conductivity detection was calculated as well as the transfer ratio when indirect UV detection was used. They allow depicting the electropherogram by computer simulation. An additional important program output is the prediction of the occurrence of system- or eigenpeaks that mimic peaks of analytes or electroosmotic flow markers. The measured electropherograms were in agreement with those theoretically predicted. Deviations were attributed to ion pairing in methanolic solutions, which was not implemented in the model.

Characterization of Metallo Bis(terpyridine) Diblock Polymers by Nonaqueous Capillary Zone Electrophoresis

A method of nonaqueous capillary zone electrophoresis (CZE) has been developed to characterize block (co)polymers of poly(ethylene oxide) and poly(styrene) containing metallo bis(terpyridine) complexes as bridging units. Specific CZE separation conditions had to be applied, with barium perchlorate dissolved in N-methylformamide (NMF) as background electrolyte and OV-1701-OH deactivated capillaries. For detection UV absorption was measured at a wavelength of 316 nm. Metallo diblock polymers with molecular weights up to 30,000 Da could be analyzed by the proposed nonaqueous CZE method. Experiments performed with polymeric compounds containing Fe, Ni or Ru as central metal ions showed that their electrophoretic mobilities were independent of the type of metal ion. Therefore, the data on the size of the polymeric compounds could be obtained using just one set of calibration standards. Polydispersities of the samples calculated from the experimental results were in correlation with the polydispersities of the polymers used in the synthesis of the metallo diblock polymers. Several polymeric samples contained metallo mono(terpyridine) complexes as impurities. These by-products could be separated from the main product. With symmetrical diblock polymers only one by-product was detected, while with an asymmetric diblock polymer two types of mono-complexes were found. The amount of the mono-complexes present as impurities was dependent on the type of central metal ion (Ni > Fe >> Ru).

Stacking and low-temperature technique in nonaqueous capillary electrophoresis for the analysis of 3,4-methylenedioxymethamphetamine.

Low-temperature and ambient-temperature nonaqueous stacking techniques in capillary electrophoresis (CE) are described for the first time. A low-temperature bath was used to control the temperature from ambient to subzero degrees, by which a novel hyphenated method, low-temperature bath-nonaqueous capillary electrophoresis stacking (LTB-NACE stacking) is demonstrated. 3,4-Methylenedioxymethamphetamine (3,4-MDMA) was determined at a concentration of 4.7 x 10(-6) M (at a 92.1% confidence level) by normal nonaqueous capillary zone electrophoresis (NACZE) and this was improved to 2.6 x 10(-8) M and 5.0 x 10(-9) M, respectively, when the NACZE stacking and LTB-NACZE stacking techniques were applied. The content of 3,4-MDMA in an illicit drug and a suspect urine sample was readily detected. Upon application of the LTB to the separation of isomers the resolution (R) for the separation of 2,3-/3,4-MDMA was improved from 0.6 (LTB, 22 degrees C) to 1.6 (LTB, -55 degrees C) and for (+)3,4-MDMA/(-)3,4-MDMA, from 0.4 (LTB, 25 degrees C) to 1.0 (LTB, -10 degrees C).

Non-aqueous capillary zone electrophoresis method for the analysis of paroxetine, tamoxifen, and their main metabolites in urine

The potential of non-aqueous capillary electrophoresis (NACE) was investigated for the simultaneous separation of paroxetine, tamoxifen, and their main metabolites. Baseline separation of the studied solutes was obtained on a 57 cm×75 μm capillary using a non-aqueous buffer composed of 18 mM ammonium acetate and 1.1% acetic acid in 80:20 (v/v) methanol–acetonitrile, with a temperature and voltage of 22 °C and 15 kV, respectively. Clomipramine was used as internal standard. Aspects such as stability of the solutions, linearity, accuracy, precision and ruggedness were examined in order to validate the proposed method. Detection limits obtained for all the studied compounds ranged between 3.0 and 7.1 μg l −1. The developed method is sensitive and robust and was used to determine paroxetine, tamoxifen, and their metabolites at clinically relevant levels in human urine. Before NACE determination, the samples were purified and enriched by means of an extraction–pre-concentration step with a pre-conditioned C 18 cartridge. Determination of these analytes in the urine of four females urines was demonstrated.

Systematic investigations of different capillary electrophoretic techniques for separation of methylquinolines

AbstractThe migration behaviour of isoquinoline, quinoline, and methyl derivatives of quinoline in different capillary electrophoretic modes has been systematically investigated. Optimised separation conditions were established by varying the key parameters (solvent, pH, temperature, surfactant concentration, core phase) for aqueous and non‐aqueous capillary zone electrophoresis (NACE), micellar electrokinetic chromatography (MEKC) with anionic or non‐ionic micelles (SDS, Brij 35), and microemulsion electrokinetic chromatography (MEEKC) with charged or uncharged microemulsion droplets. A separation of all quinolines could be achieved by MEEKC with charged droplets, by MEKC or by formamide‐based NACE. Comparing the separations with respect to separation selectivity, substantial changes in migration order could be observed between the different techniques. Regarding separation efficiency, the number of theoretical plates and limits of detection (LOD) have been compared. The best LODs were achieved using SDS as surfactant in MEKC, followed by MEEKC.

Application of 1-alkyl-3-methylimidazolium-based ionic liquids in non-aqueous capillary electrophoresis.

In many cases salts, which are liquid at room temperature show a better solubility in organic solvents, and can be used in nonaqueous capillary zone electrophoresis as ionic additives. In this study 1-alkyl-3-methylimidasolium-based ionic liquids were used as additives in separation media to assess the interactions between the analytes and the ionic additive present and to find an influence of the type and concentration of the ionic additive, also the nature of the nonaqueous medium employed. Different organic solvents (acetonitrile and methanol) contribute differently to the conversion of analytes into a charged form. Complexes with either an anionic or a cationic part of the ionic liquid additive were formed. This was the case for electrophoresis separation of Brønsted acids and polyphenolic compounds.

Separation and determination of homologues of linear alkylbenzenesulfonates by nonaqueous capillary zone electrophoresis using alkylammonium salts in ethanol.

The separation of linear alkylbenzene sulfonates (LAS) by nonaqueous capillary electrophoresis (NACE) using negative polarity, and a buffer containing acetic acid and an alkylamine in nonaqueous ethanol, has been investigated. Several primary, secondary, and tertiary alkylamines with alkyl chains of different length were compared. The solutes travelled against the electroosmotic flow (EOF), and at the same time were braked by association with the alkylamine molecules or with the alkylammonium ions. The best resolution between adjacent LAS homologues (R approximately 2.1), partial isomer resolution in two peaks, and at the same time an excellent repeatability, was obtained with a small dipentylamine excess over the acetic acid. When the buffer concentration increased, resolution between the homologues increased slightly (R approximately 2.4), and a different isomer group was partially separated. A background electrolyte (BGE) containing 10 mM acetic acid and 20 mM dipentylamine to separate and quantify the homologues within 25 min is recommended. The isomer peak profile with up to three peaks can be estimated using this buffer and another one with 80 mM acetic acid and 90 mM dipentylamine. The former BGE was used to determine LAS in liquid and powder laundry detergents. The detection limit for the determination of total LAS in these products was 2.5 microg mL(-1), and the peak area and migration time interday repeatabilities were below 4.3 and 2.8%, respectively.

Evaluation of norbornene- beta-cyclodextrin-based monomers and oligomers as chiral selectors by means of nonaqueous capillary electrophoresis.

Norbornen-5-yl carboxylic acid and norbornen-5-ylmethylsilyl ether-based beta-cyclodextrins (beta-CDs) containing up to three norbornene ester and up to five norbornene silyl ether units have been prepared from beta-CD and norbornen-5-carboxylic chloride and norbornen-5-ylmethyldichlorosilane, respectively. Oligomers (n = 2-4) were prepared therefrom using ring-opening metathesis polymerization (ROMP). Monomeric and oligomeric substituted beta-CDs were evaluated as chiral selectors in nonaqueous capillary zone electrophoresis using 35 mM sodium bicarbonate in N-methylformamide (NMF) as background electrolyte. Both monomeric and oligomeric norbornene ester- and norbornene silyl ether-type selectors showed good enantioresolution for dansylated (DNS-) amino acids using concentrations of the chiral selector of up to 4% w/v. A significant improvement in resolution was observed upon the introduction of up to five norbornene silyl ether units into a beta-CD molecule, whereas higher degrees of substitution with norbornen-5-yl-carboxyl groups lead to a reduction in enantioresolution of DNS-amino acids. Thus, pentakis(norbornen-5-ylmethylhydroxysiloxyl)-beta-CD turned out to be superior to mono(norbornen-5-ylmethylhydroxysiloxyl)-beta-CD in terms of enantioresolution. Moreover, norbornene silyl ether-type selectors were found to be more efficient than norbornene ester-type selectors. Finally, oligomeric selectors were found to possess superior or at least comparable enantioselectivity in the separation of DNS-amino acids compared to the parent monomers. A maximum in enantioresolution was obtained with oligo(pentakis(norbornen-5-ylmethylhydroxysiloxyl)beta-CD).

Determination of triazine herbicides in natural waters by solid-phase extraction and non-aqueous capillary zone electrophoresis

Capillary zone electrophoresis (CZE) in an organic medium was used to analyse triazines at sub-ppb concentration levels in natural waters after a preconcentration step using conventional C 18 cartridges and new Oasis HLB devices. With both sorbents, satisfactory results were obtained on analysing deionized water. However, on analysing natural waters, both sorbents showed very different types of behaviour. The different variables affecting the elution of both sorbents were studied, resulting in the choice of Oasis HLB as the most suitable for later separation by CZE in non-aqueous medium. Combination of a preconcentration step with electrokinetic injection revealed that capillary electrophoresis with simple UV detection can also be used satisfactorily for the quantification of micropollutants in natural waters. The detection limits obtained varied between 0.01 and 0.05 μg l −1, depending on the type of matrix analysed. The day-to-day precision varied between 0.9% and 2.3%, expressed as the relative standard deviation.

Alcohols and wide-bore capillaries in nonaqueous capillary electrophoresis

The feasibility of using C1-C5 alcohols as electrolyte solutions in nonaqueous capillary zone electrophoresis was investigated. The separation of basic narcotic analgesics and acidic diuretics was modified by changing the alcohol in an electrolyte solution containing alcohol-acetonitrile-acetic acid (50:49:1, v/v) and 20 mM ammonium acetate while other experimental conditions were kept constant. The alcohols studied were methanol, ethanol, 1-propanol, 2-propanol, 1-butanol, 2-butanol, and 1-pentanol. The results indicate that even longer-chain alcohols can be used in nonaqueous capillary zone electrophoresis and, because of the lower currents they allow, they are especially advantageous in wider capillaries. Basic analytes were separated in 200 microm and 320 microm ID capillaries with 1-butanol-acetonitrile-acetic acid (50:49:1, v/v) containing 20 mM ammonium acetate as electrolyte solution. Problems related to the use of wide-bore capillaries are discussed.

Non-aqueous capillary zone electrophoresis using polyethylene glycol as a matrix agent

Non-aqueous capillary zone electrophoresis in acetonitrile containing polyethylene glycol as a matrix agent was investigated. Separation of benzoate anions as model samples were optimized by a control of the concentration and the selection of the chain length of polyethylene glycol. Base line resolution was attained in the presence of 15% (w/v) polyethylene glycol 4000 for the benzoates used. In acetonitrile, polyethylene glycol works as a hydrogen-bonding donor and acceptor; the terminal hydroxyl groups serve as a donor toward the dissociated carboxyl groups of the benzoates, while the ether oxygen atoms serve as an acceptor toward the hydrogen-donating substituents of the benzoates. This property of polyethylene glycol is in marked contrast with that observed in aqueous phase, where polyethylene glycol works predominantly as just a hydrogen acceptor. Quantitative analysis of the interaction is presented.

Nonaqueous capillary zone electrophoresis for separation of free fatty acids with indirect fluorescence detection.

The feasibility of combining nonaqueous capillary zone electrophoresis with indirect fluorescence detection was studied for the efficient separation and sensitive detection of ionizable hydrophobic substances which do not possess practically suitable detection properties. Medium- and long-chain free fatty acids, C6-C24, were selected as test compounds. The results showed that such a wide range of medium- and long-chain free fatty acids could be separated between any two consecutive homologs in one run and be detected at a level of about 0.01-0.02 mM in highly basic methanol/acetonitrile media containing fluorescein as coion of background electrolyte for indirect fluorescence detection.

Enantiomeric separations of primary amino compounds by nonaqueous capillary zone electrophoresis with a chiral crown ether

The enantiomeric separation by capillary electrophoresis (CE) in non-aqueous media was examined. The enantiomeric separations of eight primary amino compounds including aromatic amines, amino acids and amino alcohols were achieved by CE in formamide containing a chiral crown ether, (+)-18-crown-6 tetracarboxylic acid. The addition of tetra- n-butylammonium perchlorate as a supporting electrolyte to the electrophoretic solution improved the separation efficiency and gave the baseline enantiomeric separation of dl-1-phenylethylamine which has not been separated by any other separation mode of CE yet.

Application of capillary electrophoresis and related techniques to drug metabolism studies

The use of capillary electrophrosis (CE) for the separation of small organic molecules such as pharmaceutical agents and drug/xenobiotic metabolites has become increasingly popular. This has arisen, at least in part, from the complimentary mode of separation afforded by CE when compared to the more mature technique of HPLC. Other qualities of CE include relative ease of method of development, rapid analysis, and low solvent consumption. The recent introduction of a variety of detector systems (including UV diode array, laser-induced fluorescence, conductivity) and the demonstrated coupling of CE to MS have also aided acceptance of this technology. In the present report, we review the role of CE coupled to various detector systems including a mass spectrometer for the characterization of both in vitro and in vivo derived drug metabolite mixtures. Attributes of CE for this application are demonstrated by discussion of metabolism studies of the neuroleptic agent haloperidol. Various aspects of the development and use of CE and CE-MS for the characterization of haloperidol metabolites, including criteria for selection of parameters such as pH, ionic strength, extent of organic modification, and the use of nonaqueous capillary zone electrophoresis are discussed. We also consider potential limitations of CE and CE-MS for drug metabolism research and describe the introduction of membrane preconcentration-CE (mPC-CE) and mPC-CE-MS as a solution that overcomes the rather poor concentration limits of detection of CE methods without compromising the resolution of analytes or separation efficiency of this technique.