Nm In Size Research Articles

Detection and analysis technologies for single biological nanoparticles

In recent years, nanoscale detection has played an increasingly important role in the research on viruses, exosomes, small bacteria, and organelles. The small size and complex biological natures of these particles, with the smallest known virus particle measuring only 17 nm in diameter and exosomes ranging from 30 nm to 150 nm in size, pose challenges to the classical large-scale (typically micron-scale) characterization methods, which has become a major obstacle in the research. The emergence of nanoscale detection and analysis technologies has filled the gap of optical microscopy, a conventional technique in this field. These technologies enable the sensitive and robust detection of objects that exceed the lower limit of optical detection, revealing the molecular composition and biological roles simultaneously. Currently, several commercialized instruments based on nanotechnology have emerged, providing complete single-particle detection solutions and achieving unique functionality based on their respective technological advantages. However, it is inevitable that these technologies have limitations in terms of application and detection capabilities, as they continue to evolve. This paper offers a thorough overview of the principles, advantages, limitations, and future development trends of several mainstream commercial instruments, aiming to serve researchers in selecting and utilizing these technologies.

Antibacterial Silver Nanoparticle Containing Polydopamine Hydrogels That Enhance Re-Epithelization.

A polydopamine polyelectrolyte hydrogel was developed by ionic crosslinking dextran sulfate with a copolymer of polyethyleneimine and polydopamine. Gelation was promoted by the slow hydrolysis of glucono-δ-lactone. Within this hydrogel, silver nanoparticles were generated in situ, ranging from 25 nm to 200 nm in size. The antibacterial activity of the hydrogel was proportional to the quantity of silver nanoparticles produced, increasing as the nanoparticle count rose. The hydrogels demonstrated broad-spectrum antibacterial efficacy at concentrations up to 108 cells/mL for P. aeruginosa, K. pneumoniae, E. coli and S. aureus, the four most prevalent bacterial pathogens in chronic septic wounds. In ex vivo studies on human skin, biocompatibility was enhanced by the presence of polydopamine. Dextran sulfate is a known irritant, but formulations with polydopamine showed improved cell viability and reduced levels of the inflammatory biomarkers IL-8 and IL-1α. Silver nanoparticles can inhibit cell migration, but an ex vivo human skin study showed significant re-epithelialization in wounds treated with hydrogels containing silver nanoparticles.

Facile room temperature synthesis of size-controlled spherical silica from silicon metal via simple sonochemical process

The waterglass or St o¨ ber method is commonly used to synthesize spherical colloidal silica; however, these methods have some disadvantages, such as complicated processes for the removal of sodium ions and expensive and energy-consuming raw materials such as tetraethoxysilane (TEOS). In this study, size-controlled spherical colloidal silica was synthesized from silicon metal at room temperature using an ultrasound process with hydrazine monohydrate as the solvent. Silicon metal dissolves easily in hydrazine monohydrate under ultrasound irradiation, and spherical colloidal silica can be synthesized by adding alcohol to this precursor solution. By changing the concentration or type of alcohol, size-controlled colloidal silica 20–200 nm in size could be easily obtained. In addition, finer and more monodisperse particles were produced by low-frequency ultrasound irradiation, which had a higher stirring effect at the particle formation stage. The present method is effective because size-controlled colloidal silica can be synthesized at room temperature using only silicon metal, hydrazine, and alcohol as raw materials, without complicated processes or expensive and energy-consuming raw materials such as TEOS or tetramethoxysilane (TMOS).

#2922 The role of urinary extracellular-derived miRNAs dysregulation in IgA nephropathy

Abstract Background and Aims IgA nephropathy (IgAN) is one of the most common forms of glomerulonephritis and causes hematuria and proteinuria by damaging the mesangial and podocyte cells. Urinary extracellular vesicles (uEVs) derived from damaged podocytes may reflect podocyte damage in various glomerular diseases and are considered an early and noninvasive diagnostic method. This study aimed to extract urinary extracellular vesicles (EVs) and investigate the expression dysregulation and diagnostic value of miR-29c, miR-146a, miR-148b, miR-155, miR-200b, and miR-429 in urine samples from patients with IgAN. Method Urine samples were collected from 20 patients with IgAN, 30 patients with membranous nephropathy (MGN), and 16 healthy individuals to extract Urinary EVs by ultracentrifugation. The characterization of EVs was evaluated by the specific protein markers of the EVs, flotillin-1, ALiX, and CD-9, along with histone H1 and podocyte-specific marker podocalyxin via western blotting. SEM and DLS were used to investigate the size and morphology of EVs. The expression levels of the miRNAs were evaluated using Real-time PCR. Results Numerous extracellular vesicles >100 nm in size were present in the urine sample which were considered as EVs based on references. There were higher levels of the specific markers flotillin-1, ALiX, and podococalyxin in the urine samples of IgAN patients than in the control samples (P < 0.001 and P < 0.001, respectively). There was a statistically significant difference among the expression level of miR-29c (P = 0.002 and P = 033) in the group of IgAN patients compared to MGN patients and the group of healthy people, based on Rock curve analysis this urinary marker could discriminate the IgAN patients from MGN group, the area under the curve AUC ≥ 0.73. Conclusion This study showed that the different levels of miRNAs studied in urinary EVs may indicate podocyte damage and have a direct relationship with the pathology of IgAN and MGN. Further studies are needed to confirm these results and determine the diagnostic value of these markers.

Interaction of composite fume suppression and odor elimination agents with crumb rubber modified asphalt: Inhibition behavior of volatile organic compounds (VOCs) and inorganic fume

The production and construction of crumb rubber modified asphalt (RMA) at high temperatures can produce a large amount of toxic fume, which is detrimental to human health and environment. In this study, a series of composite fume suppression and odor elimination agents (CSEAs) with both physical adsorption and chemical capture functions were adopted to reduce the emissions of volatile organic compounds (VOCs) and hydrogen sulfide (H2S). The material composition, microstructure, and specific surface area of CSEA were analyzed by using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and N2 adsorption-desorption isotherm (BET). The inhibitory effects of adding CSEA on toxic fume emissions from RMA at high temperatures were investigated through a combination of fume emission tests, H2S gas detection, gel permeation chromatography (GPC), and gas chromatography–mass spectrometry technology (GC–MS). The adsorption behavior of CSEA on H2S was analyzed through adsorption dynamics. Results showed that the physical and chemical properties of CSEA are stable while chemical adsorption dominates the CSEA's effect on H2S. ZnO and Ca(OH)2 exhibit good crystallization effects on the surface of the carrier by forming mesoporous structures mostly above 3.4 nm in size. The incorporation of CSEA significantly reduced the total emissions of RMA fume and the main components of VOCs in which the average inhibition rate of H2S can reach 44 % at an initial 30 mins.

Advances in the Toxicity Assessment of Silver Nanoparticles Derived from a Sphagnum fallax Extract for Monolayers and Spheroids.

The production of nanomaterials through environmentally friendly methods is a top priority in the sustainable development of nanotechnology. This paper presents data on the synthesis of silver nanoparticles using an aqueous extract of Sphagnum fallax moss at room temperature. The morphology, stability, and size of the nanoparticles were analyzed using various techniques, including transmission electron microscopy, Doppler laser velocimetry, and UV-vis spectroscopy. In addition, Fourier transform infrared spectroscopy was used to analyze the presence of moss metabolites on the surface of nanomaterials. The effects of different concentrations of citrate-stabilized and moss extract-stabilized silver nanoparticles on cell viability, necrosis induction, and cell impedance were compared. The internalization of silver nanoparticles into both monolayers and three-dimensional cells spheroids was evaluated using dark-field microscopy and hyperspectral imaging. An eco-friendly method for the synthesis of silver nanoparticles at room temperature is proposed, which makes it possible to obtain spherical nanoparticles of 20-30 nm in size with high bioavailability and that have potential applications in various areas of human life.

Efficient Visible Light Photocatalytic Hydrogen Evolution by Boosting the Interfacial Electron Transfer in Mesoporous Mott-Schottky Heterojunctions of Co2P-Modified CdIn2S4 Nanocrystals.

Photocatalytic water splitting for hydrogen generation is an appealing means of sustainable solar energy storage. In the past few years, mesoporous semiconductors have been at the forefront of investigations in low-cost chemical fuel production and energy conversion technologies. Mesoporosity combined with the tunable electronic properties of semiconducting nanocrystals offers the desired large accessible surface and electronic connectivity throughout the framework, thus enhancing photocatalytic activity. In this work, we present the construction of rationally designed 3D mesoporous networks of Co2P-modified CdIn2S4 nanoscale crystals (ca. 5-6 nm in size) through an effective soft-templating synthetic route and demonstrate their impressive performance for visible-light-irradiated catalytic hydrogen production. Spectroscopic characterizations combined with electrochemical studies unravel the multipathway electron transfer dynamics across the interface of Co2P/CdIn2S4 Mott-Schottky nanoheterojunctions and shed light on their impact on the photocatalytic hydrogen evolution chemistry. The strong Mott-Schottky interaction occurring at the heterointerface can regulate the charge transport toward greatly improved hydrogen evolution performance. The hybrid catalyst with 10 wt % Co2P content unveils a H2 evolution rate of 20.9 mmol gcat -1 h-1 under visible light irradiation with an apparent quantum efficiency (AQE) up to 56.1% at 420 nm, which is among the highest reported activities. The understanding of interfacial charge-transfer mechanism could provide valuable insights into the rational development of highly efficient catalysts for clean energy applications.

Photocatalysis and antimicrobial activity of ZnO@TiO2 core-shell nanoparticles

Wet chemical synthesis was used in this instance to create ZnO@TiO2 core-shell nanoparticles. By examining X-ray diffraction and Selected Area Electron Diffraction patterns, it was determined that the phase formation of prepared nanoparticles was a hexagonal primitive structure of ZnO and Tetragonal bcc structure of anatase phase of TiO2 devoid of impurity peaks. It was discovered that crystallites were 25 nm in size on average. The results of a surface morphology analysis utilizing High-Resolution Scanning Electron Microscopy and High-Resolution Transmission Electron Microscopy show that all of the particles are spherical. The energy dispersive X-ray spectroscopy study provided proof for the existence of core-shell elemental compositions. Fourier-Transform Infrared spectrum revealed the presence of characteristics of metal bonding with oxygen of ZnO and TiO2. UV-visible absorption analysis exhibited absorption peak in the UV region and the band gap energy of ZnO@TiO2 core-shell nanoparticles. The thermal behavior of ZnO@TiO2 core-shell nanoparticles was analyzed by using Thermogravimetric Analysis, Differential scanning calorimetry, and Differential Thermal Analysis techniques. The X-ray photoelectron spectroscopy analysis exhibited the coating of TiO2 (shell) on the surface of ZnO (core) for the formation of a core-shell nanostructure. Due to its extremely small crystallite size, wide surface area, and reduced band gap, the ZnO@TiO2 core-shell sample demonstrated outstanding photocatalytic activity when rhodamine-B dye was photocatalytically degraded in the presence of UV light irradiation. Finally, the antibacterial and antifungal activities of ZnO@TiO2 core-shell nanoparticles were investigated, and it was shown that antifungal activity was superior to antibacterial activity. A suitable material for environmental and biological applications that produced core-shell nanoparticles displayed regulated grain size, outstanding photocatalytic performance, and high antifungal activity.

Folic acid-mediated enhancement of the diagnostic potential of luminescent europium-doped hydroxyapatite nanocrystals for cancer biomaging

Early and accurate cancer diagnosis is crucial for improving patient survival rates. Luminescent nanoparticles have emerged as a promising tool in fluorescence bioimaging for cancer diagnosis. To enhance diagnostic accuracy, ligands promoting endocytosis into cancer cells are commonly incorporated onto nanoparticle surfaces. Folic acid (FA) is one such ligand, known to specifically bind to folate receptors (FR) overexpressed in various cancer cells such as cervical and ovarian carcinoma. Therefore, surface modification of luminescent nanoparticles with FA can enhance both luminescence efficiency and diagnostic accuracy. In this study, luminescent europium-doped hydroxyapatite (EuHAp) nanocrystals were prepared via hydrothermal method and subsequently modified with (3-Aminopropyl)triethoxysilane (APTES) followed by FA to target FR-positive human cervical adenocarcinoma cell line (HeLa) cells. The sequential grafting of APTES and then FA formed a robust covalent linkage between the nanocrystals and FA. Rod-shaped FA-modified EuHAp nanocrystals, approximately 100 nm in size, exhibited emission peaks at 589, 615, and 650 nm upon excitation at 397 nm. Despite a reduction in photoluminescence intensity following FA modification, fluorescence microscopy revealed a remarkable 120-fold increase in intensity compared to unmodified EuHAp, attributed to the enhanced uptake of FA-modified EuHAp. Additionally, confocal microscope observations confirmed the specificity and the internalization of FA-modified EuHAp nanocrystals in HeLa cells. In conclusion, the modification of EuHAp nanocrystals with FA presents a promising strategy to enhance the diagnostic potential of cancer bioimaging probes.

Mix and Shake: A Mild Way to Drug-Loaded Lysozyme Nanoparticles.

Biocompatible nanoparticles as drug carriers can improve the therapeutic efficiency of hydrophobic drugs. However, the synthesis of biocompatible and biodegradable polymeric nanoparticles can be time-consuming and often involves toxic solvents. Here, a simple method for protein-based stable drug-loaded particles with a narrow polydispersity is introduced. In this process, lysozyme is mixed with hydrophobic drugs (curcumin, ellipticine, and dasatinib) and fructose to prepare lysozyme-based drug particles of around 150 nm in size. Fructose is mixed with the drug to generate nanoparticles that serve as templates for the lysozyme coating. The effect of lysozyme on the physicochemical properties of these nanoparticles is studied by transmission electron microscopy (TEM) and scattering techniques (e.g., dynamic light scattering (DLS) and small-angle X-ray scattering (SAXS)). We observed that lysozyme significantly stabilized the curcumin fructose particles for 7 days. Moreover, additional drugs, such as ellipticine and dasatinib, can be loaded to form dual-drug particles with narrow polydispersity and spherical morphology. The results also reveal that lysozyme dual ellipticine/dasatinib curcumin particles enhance the cytotoxicity and uptake on MCF-7 cells, RAW 264.7 cells, and U-87 MG cells due to the larger and rigid hydrophobic core. In summary, lysozyme in combination with fructose and curcumin can serve as a powerful combination to form protein-based stable particles for the delivery of hydrophobic drugs.

Ozone-Assisted Hydrothermal Synthesis Method of Sb-Doped SnO2 Conductive Nanoparticles for Carbon-Free Oxygen-Reduction-Reaction Catalysts of Proton-Exchange-Membrane Hydrogen Fuel Cells

Proton-exchange-membrane hydrogen fuel cells (PEMFCs) are an important energy device for achieving a sustainable hydrogen society. Carbon-based catalysts used in PEMFCs’ cathode can degrade significantly during operation-voltage shifts due to the carbon deterioration. The longer lifetime of the system is necessary for the further wide commercialization of PEMFCs. Therefore, carbon-free catalysts are required for PEMFCs. In this study, highly crystallized conducting Sb-doped SnO2 (Sb-SnO2) nanoparticles (smaller than 7 nm in size) were synthesized using an ozone-assisted hydrothermal synthesis. Pt nanoparticles were loaded on Sb-SnO2 supporting particles by polyol method to be “Pt/Sb-SnO2 catalyst”. The Pt/Sb-SnO2 catalyst showed a high oxygen reduction reaction (ORR) mass activity (178.3 A g-Pt−1 @ 0.9 V), compared to Pt/C (149.3 A g-Pt−1 @ 0.9 V). In addition, the retention ratio from the initial value of electrochemical surface area (ECSA) during 100,000-voltage cycles tests between 1.0 V and 1.5 V, Pt/SnO2 and Pt/Sb-SnO2 catalyst exhibited higher stability (90% and 80%), respectively, than that of Pt/C catalyst (47%). Therefore, the SnO2 and Sb-SnO2 nanoparticles synthesized using this new ozone-assisted hydrothermal method are promising as carbon-free catalyst supports for PEMFCs.

Instant green synthesis: obtaining stable nanoparticles and understanding the extract's behavior in the particle formation mechanism

Numerous plant extracts are abundant in biomolecules that can be employed in the biogenic synthesis of metallic nanoparticles owing to their potent reducing capabilities. The mechanism by which biomolecules act as reducers and expedite the reduction of silver ions remains poorly understood. This study presents an instantaneous and environmentally friendly synthesis of silver nanoparticles (AgNPs) using varying concentrations of commercially available green tea and concentrations of a dextrose-reducing solution. The AgNPs formed instantaneously, likely due to the competitive reaction between the polyphenols present in green tea and the dextrose. The best AgNPs produced using a diluted green tea solution at a concentration of 0.05 g of tea/ml and 100 μl of dextrose solution exhibited high stability over a period of 90 days, as confirmed by UV–vis spectroscopy and dynamic light scattering. The results of antioxidant properties from diluited tea showed 2,2-diphenyl-1-picrylhydrazyl (DPPH) 0.013 ± (0.1) μmol Trolox Equivalent Anyioxidant Capacity (TEAC) TEAC/g, Ferric Reducing Antioxidant Power (FRAP) 10.3 ± (0.1) μmol TEAC/g and Total Polyphenol Content (TPC) 0.12 ± (.001) μgGAE(Galic Acid Equivalent)/g). The resulting nanoparticles are extremely small, measuring approximately 30 to 50 nm in size, and exhibit a spherical morphology as evidenced by SEM imaging. The plasmon bandwidth is better in more diluted tea and higher proportions of dextrose added than the others condition of synthesis. Probably, the results of 2nd extraction of green tea diluted can be evidence that phenolic compounds, mainly, caffeine and gallic acid, are contributing to forming and stabilizing the silver nanoparticles. This fundamental knowledge showed the method employed is ecologically sound and adheres to green principles.

Morphology and biological responses of nanocomposites of hydroxyapatite, graphene oxide, and dysprosium oxide (Dy2O3) for biomedical applications

In this research study, various nanocomposites, namely Dy2O3, Sm2O3, HAP/Dy2O3, HAP/Dy2O3/GO, and HAP/Sm2O3/GO, were extensively examined and analyzed. The primary focus was on the development of advanced biomaterials with improved mechanical properties, biocompatibility, and antimicrobial activity. The investigation involved the use of transmission electron microscopy (TEM) and scanning electron microscopy (SEM) techniques to observe the distinctive nanorods of hydroxyapatite (HAP) within the ternary nanocomposite. The SEM micrographs yielded an average size of 69 ± 22 * 19 ± 4 nm for the HAP nanorods, accompanied by an average roughness measurement of 10.5 nm. The TEM analysis provided further insights into the distribution of HAP and Sm2O3 within graphene oxide (GO) nanosheets, revealing HAP particles measuring 20 nm in size and 65 nm in length, and Sm2O3 particles measuring 6 nm in size. To evaluate the biocompatibility of the newly developed ternary nanocomposite, HAP/Dy2O3/GO, osteoblast cells were employed. The results showed a minor decrease in cell viability, with a measured percentage of cell viability at 97.5 ± 2.1 %. Furthermore, the HAP/Dy2O3/GO nanocomposite exhibited notable antibacterial properties against E. coli and S. aureus bacteria, as indicated by inhibition zones measuring 15.3 ± 0.8 mm and 15.9 ± 1.1 mm, respectively. The unique composition of HAP/Dy2O3/GO demonstrated enhanced roughness parameters and improved biocompatibility due to its altered topological features. Additionally, its remarkable antibacterial activity and robust mechanical strength establish HAP/Dy2O3/GO as a promising candidate for further investigation as a biomaterial for bone implants.

Dynamic Monitoring of Biomolecular Hydrodynamic Dimensions by Magnetization Motion on Quartz Crystal Microbalance.

Hydrodynamic dimension (HD) is the primary indicator of the size of bioconjugated particles and biomolecules. It is an important parameter in the study of solid-liquid two-phase dynamics. HD dynamic monitoring is crucial for precise and customized medical research as it enables the investigation of the continuous changes in the physicochemical characteristics of biomolecules in response to external stimuli. However, current HD measurements based on Brownian motion, such as dynamic light scattering (DLS), are inadequate for meeting the polydisperse sample demands of dynamic monitoring. In this paper, we propose MMQCM method samples of various types and HD dynamic monitoring. An alternating magnetic field of frequency ωm excites biomolecule-magnetic bead particles (bioMBs) to generate magnetization motion, and the quartz crystal microbalance (QCM) senses this motion to provide HD dynamic monitoring. Specifically, the magnetization motion is modulated onto the thickness-shear oscillation of the QCM at the frequency ωq. By analysis of the frequency spectrum of the QCM output signal, the ratio of the magnitudes of the real and imaginary parts of the components at frequency ωq ± 2ωm is extracted to characterize the particle size. Using the MMQCM approach, we successfully evaluated the size of bioMBs with different biomolecule concentrations. The 30 min HD dynamic monitoring was implemented. An increase of ∼10 nm in size was observed upon biomolecular structural stretching. Subsequently, the size of bioMBs gradually reduced due to the continuous dissociation of biomolecules, with a total reduction of 20∼40 nm. This HD dynamic monitoring demonstrates that the release of biomolecules can be regulated by controlling the duration of magnetic stimulation, providing valuable insights and guidance for controlled drug release in personalized precision medicine.

Extracellular vesicles secreted by cumulus cells contain microRNAs that are potential regulatory factors of mouse oocyte developmental competence.

The role of cumulus cells (CCs) in the acquisition of oocyte developmental competence is not yet fully understood. In a previous study, we matured cumulus-denuded fully-grown mouse oocytes to metaphase II (MII) on a feeder layer of CCs (FL-CCs) isolated from developmentally competent (FL-SN-CCs) or incompetent (FL-NSN-CCs) SN (surrounded nucleolus) or NSN (not surrounding nucleolus) oocytes, respectively. We observed that oocytes cultured on the former could develop into blastocyst, while those matured on the latter arrested at the 2-cell stage. To investigate the CC factors contributing to oocyte developmental competence, here we focused on the CCs release into the medium of extracellular vesicles (EVs) and on their miRNA content. We found that, during the 15-hr transition to MII, both FL-SN-CCs and FL-NSN-CCs release EVs that can be detected, by confocal microscopy, inside the zona pellucida (ZP) or the ooplasm. The majority of EVs are <200 nm in size, which is compatible with their ability to cross the ZP. Next-generation sequencing of the miRNome of FL-SN-CC versus FL-NSN-CC EVs highlighted 74 differentially expressed miRNAs, with 43 up- and 31 down-regulated. Although most of these miRNAs do not have known roles in the ovary, in silico functional analysis showed that seven of these miRNAs regulate 71 target genes with specific roles in meiosis resumption (N = 24), follicle growth (N = 23), fertilisation (N = 1) and the acquisition of oocyte developmental competence (N = 23). Overall, our results indicate CC EVs as emerging candidates of the CC-to-oocyte communication axis and uncover a group of miRNAs as potential regulatory factors.

New Approach to Synthesizing Cathode PtCo/C Catalysts for Low-Temperature Fuel Cells

The presented study is concerned with a new multi-step method to synthesize PtCo/C materials based on composite CoxOy/C that combines the advantages of different liquid-phase synthesis methods. Based on the results of studying the materials at each stage of synthesis with the TG, XRD, TEM, SEI, TXRF, CV and LSV methods, a detailed overview of the sequential changes in catalyst composition and structure at each stage of the synthesis is presented. The PtCo/C catalyst synthesized with the multi-step method is characterized by a uniform distribution of bimetallic nanoparticles of about 3 nm in size over the surface of the support, which result in its high ESA and ORR activity. The activity study for the synthesized PtCo/C catalyst in an MEA showed better current–voltage characteristics and a higher maximum specific power compared with an MEA based on a commercial Pt/C catalyst. Therefore, the results of the presented study demonstrate high prospects for the developed approach to the multi-step synthesis of PtM/C catalysts, which may enhance the characteristics of proton-exchange membrane fuel cells (PEMFCs).

Impact of PEDV infection on the biological characteristics of porcine intestinal exosomes.

Porcine epidemic diarrhea (PED) is a highly contagious intestinal infection primarily affecting pigs. It is caused by the porcine epidemic diarrhea virus (PEDV). PEDV targets the villus tissue cells in the small intestine and mesenteric lymph nodes, resulting in shortened intestinal villi and, in extreme cases, causing necrosis of the intestinal lining. Moreover, PEDV infection can disrupt the balance of the intestinal microflora, leading to an overgrowth of harmful bacteria like Escherichia coli. Exosomes, tiny membrane vesicles ranging from 30 to 150 nm in size, contain a complex mixture of RNA and proteins. MicroRNA (miRNA) regulates various cell signaling, development, and disease progression processes. This study extracted exosomes from both groups and performed high-throughput miRNA sequencing and bioinformatics techniques to investigate differences in miRNA expression within exosomes isolated from PEDV-infected porcine small intestine tissue compared to healthy controls. Notably, two miRNA types displayed upregulation in infected exosomes, while 12 exhibited downregulation. These findings unveil abnormal miRNA regulation patterns in PEDV-infected intestinal exosomes, shedding light on the intricate interplay between PEDV and its host. This will enable further exploration of the relationship between these miRNA changes and signaling pathways, enlightening PEDV pathogenesis and potential therapeutic targets.

Enhancing the energy storage performance of titanium dioxide electrode material by green doping of Nd2O3 nanoparticles for electrochemical supercapacitors

Doping of sesquioxide alloy onto TiO2 nanomaterials was carried out in a novel green chemistry method using Corallo carpus epigaeus to fabricate the electrodes for pseudocapacitors. The conducted X-ray diffraction studies demonstrated the tetragonal phase of TiO2 and hexagonal phase of Nd2O3 nanomaterials. Morphological analysis revealed the irregular shape of TiO2 materials, each exceeding 100 nm in size, while Nd2O3 materials exhibited a spherical shape within the range of 10–20 nm. Electrochemical investigations unveiled a quasi-rectangular shape in cyclic voltammetric studies and a triangular shape in galvanostatic reactions, suggesting superior electrochemical performance of the electrodes. The doped electrodes exhibited a higher specific capacitance value (785.71 F/g) compared to pure TiO2 (707.14 F/g) at a current density of 1 A/g. These findings affirm the suitability of doped electrode materials for applications in electrical energy storage.

Propolis polyphenol nanosheet for synergistic cancer chemo-photothermal therapy

Two-dimensional (2D) carbon-based nanostructures hold great promise as near-infrared (NIR) photothermal materials, yet their widespread use has been hindered by labor-intensive and costly fabrication processes. Here, a novel, cost-effective approach is presented to produce photothermal materials derived from the polyphenolic fraction of propolis (PFP) for the first time. The method involves the pyrolysis of PFP under a neutral atmosphere, resulting in the formation of 2D PFP-based nanosheets (PFPNS) measuring 50–100 nm in size with efficient photothermal properties. Then, a layer-by-layer nanohybrid structure comprising PFPNS, polydopamine (PDA), mesoporous silica (MS), and polyethyleneimine (PEI) layers (PFPNS@PDA@MS-PEI) was designed as a versatile platform for drug delivery. Specifically, the anticancer drug doxorubicin (DOX) was loaded onto the nanohybrid (PFPNS@PDA@MS(DOX)-PEI) for targeted delivery to cancerous cells. Each layer of the nanohybrid serves a distinct purpose, enhancing functionality and efficacy. The NIR-responsive PFPNS@PDA component facilitates accelerated drug release and induces hyperthermic effects on cancer cells upon NIR irradiation. The MS structure enables high drug loading capacity (approximately 83.3%), while the pH-responsive PEI layer promotes cellular uptake and facilitates drug release within the acidic microenvironment of cancer cells. Combining NIR irradiation with chemotherapy results in a synergistic effect, leading to the eradication of 67% of MCF-7 breast cancer cells. The demonstrated efficacy, coupled with the non-toxic nature of the nanohybrid, positions it as a promising candidate for synergistic chemo-photothermal therapy of tumor tissues.

Environmentally Friendly Synthesis of Polymer Nanoparticles in a Packed Reactor Using Glass Beads

AbstractPolymeric particles less than 100 nm in size (polymer nanoparticles), which are useful in the fields of medicine and so on, are synthesized through emulsion polymerization, wherein surfactants are essential for maintaining their dispersion stability, contaminating particle surfaces and causing high environmental pollution. The soap‐free emulsion polymerization (SFEP) of styrene in a packed reactor using microglass beads enables the synthesis of polymer nanoparticles without surfactants. Ultraviolet irradiation is used for radical polymerization using an initiator during the SFEP of styrene. The reaction space in the packed reactor is controlled by the size of glass beads to be filled in the reactor. A decrease in the size of the glass beads narrows the reaction space, causing the average polystyrene particle size to reach 27.3 nm and suppress convection flow by the wall of the glass beads, thereby limiting particle motion and preventing particle growth through particle collisions.This article is protected by copyright. All rights reserved