Nitrogen Source Research Articles

Bioremediation potential of Bacillus sp. and Paenebacillus sp. novel lead-resistant isolates: Identification, characterization, and optimization studies

Environmental pollution by heavy metals and other toxic substances has increasingly become a global health concern. Lead is a hazardous environmental contaminant that is been released to the surface causing deleterious health effects to man. Various strategies have been employed such as excavation, precipitation, and vitrification to remove lead from polluted sites. However, bioremediation of heavy metal contaminated sites has served as a cost-effective and ecofriendly tool for detoxifying and restoration of ecological entities. In this study, we reported the isolation and optimization of two novel lead-resistant isolates from active goldmine contaminated site of Anka, Zamfara state Nigeria. Results of Atomic Absorption Spectroscopy (AAS) showed higher lead concentration from the sampled sites (p<0.05) than the USEPA standard (400 mg/Kg). Paenebacillus sp. strain BUK_BCH_BTE 3 (MT160418) and Bacillus sp. strain BUK_BCH_BTE 4 (MT160452) were identified based on the 16 S rRNA partial gene sequencing of the locally isolated microorganisms. Characterization of the two isolates revealed optimum growth at 37 °C, a pH of 7.0 over 48 hrs while utilizing inoculum volumes of 100 µL each. The two isolates utilized optimum sucrose concentrations at 10–20 g/L, while 5 g/L nitrogen source and 5 g/L of urea were optimum for Paenebacillus sp. as well as Bacillus sp. respectively. An optimal lead concentration of 1000 g/L was obtained by both isolates. Furthermore, the two isolates tolerated up to 3000 mg/L lead nitrate. Mercury, a toxic heavy metal, was noticed to hinder the growth of both isolates significantly at p<0.05. Hence, the locally isolated Paenebacillus sp. and Bacillus sp. could be used as promising tools for bioremediation of lead-contaminated environment.

Optimization Studies of Anticancer Enzyme -asparaginase from Actinomycetes

Optimization Studies of Anticancer Enzyme -asparaginase from Actinomycetes

Rapidly rotating Population III stellar models as a source of primary nitrogen

The first stars might have been fast rotators. This would have important consequences for their radiative, mechanical, and chemical feedback. We discuss the impact of fast initial rotation on the evolution of massive Population III models and on their nitrogen and oxygen stellar yields. We explore the evolution of Population III stars with initial masses in the range of 9 msol ini msol starting with an initial rotation on the zero-age main sequence equal to 70&lt;!PCT!&gt; of the critical one. We find that with the physics of rotation considered here, our rapidly rotating Population III stellar models do not follow a homogeneous evolution. They lose very little mass in the case in which mechanical winds are switched on when the surface rotation becomes equal to or larger than the critical velocity. The impact on the ionising flux appears to be modest when compared to moderately rotating models. Fast rotation favours, in models with initial masses above sim 20 msol the appearance of a very extended intermediate convective zone around the H-burning shell during the core He-burning phase. This shell has important consequences for the sizes of the He- and CO-cores, and thus impacts the final fate of stars. Moreover, it has a strong impact on nucleosynthesis, boosting the production of primary 14N. Fast initial rotation significantly impacts the chemical feedback of Population III stars. Observations of extremely metal-poor stars and/or starbursting regions are essential to provide constraints on the properties of the first stars.

Nitrate Signaling and Its Role in Regulating Flowering Time in Arabidopsis thaliana.

Plant growth is coordinated with the availability of nutrients that ensure its development. Nitrate is a major source of nitrogen (N), an essential macronutrient for plant growth. It also acts as a signaling molecule to modulate gene expression, metabolism, and a variety of physiological processes. Recently, it has become evident that the calcium signal appears to be part of the nitrate signaling pathway. New key players have been discovered and described in Arabidopsis thaliana (Arabidopsis). In addition, knowledge of the molecular mechanisms of how N signaling affects growth and development, such as the nitrate control of the flowering process, is increasing rapidly. Here, we review recent advances in the identification of new components involved in nitrate signal transduction, summarize newly identified mechanisms of nitrate signaling-modulated flowering time in Arabidopsis, and suggest emerging concepts and existing open questions that will hopefully be informative for further discoveries.

Production and characterization of bacterial cellulose by Rhizobium sp. isolated from bean root

Bacterial cellulose (BC) is a natural polymer renowned for its unique physicochemical and mechanical attributes, including notable water-holding capacity, crystallinity, and a pristine fiber network structure. While BC has broad applications spanning agriculture, industry, and medicine, its industrial utilization is hindered by production costs and yield limitations. In this study, Rhizobium sp. was isolated from bean roots and systematically assessed for BC synthesis under optimal conditions, with a comparative analysis against BC produced by Komagataeibacter hansenii. The study revealed that Rhizobium sp. exhibited optimal BC synthesis when supplied with a 1.5% glucose carbon source and a 0.15% yeast extract nitrogen source. Under static conditions at 30 °C and pH 6.5, the most favorable conditions for growth and BC production (2.5 g/L) were identified. Modifications were introduced using nisin to enhance BC properties, and the resulting BC-nisin composites were comprehensively characterized through various techniques, including FE-SEM, FTIR, porosity, swelling, filtration, and antibacterial activity assessments. The results demonstrated that BC produced by Rhizobium sp. displayed properties comparable to K. hansenii-produced BC. Furthermore, the BC-nisin composites exhibited remarkable inhibitory activity against Escherichia coli and Pseudomonas aeruginosa. This study contributes valuable insights into BC’s production, modification, and characterization utilizing Rhizobium sp., highlighting the exceptional properties that render it efficacious across diverse applications.

Cercospora leaf spot management with nitrogenous fertilizers in cotton is dependent on the disease amount in the plant canopies

The aim of this study was to examine the impact of both organic and inorganic nitrogen fertilizers on the intensity and epidemiological components of Cercospora leaf spot across three different canopies of cotton plants, specifically the variety DP ACALA 90, under field conditions. Fertilizers used in the study included bovine manure, Jatropha curcas seedcake, poultry manure, and urea (the latter serving as a control). These were applied at 20 days after plant emergence and then during the flowering stage until the total nitrogen (N) dose reached 50, 100, 150, or 200 kg N per hectare. The incidence and severity of the disease were assessed starting at the reproductive stage B1 (the first visible flower bud) across the lower, middle, and upper canopies of four cotton plants, with six evaluations conducted over time. To calculate the initial inoculum (Y0) and the disease progress rate (r), the Exponential, Gompertz, and Logistic models were employed based on temporal data. The study was designed as a randomized complete block with a 4x4 factorial arrangement (fertilizer type x dose), and mean comparisons were made using Tukey's test (p ≤ 0.05). It was found that disease intensity within each canopy level varied in response to the type of nitrogen source and the applied dose, with the severity of the disease (including the area under the disease progress curve) being particularly influenced. A significant interaction between the type of fertilizer and the dose regarding the intensity of Cercospora leaf spot was observed. The Exponential model most accurately depicted the disease's temporal progression. Notably, poultry manure and urea were the fertilizers that most adversely influenced the intensity and initial inoculum (Y0) of Cercospora leaf spot across the various canopies of the cotton plants. The findings suggest that the use of organic fertilizers in cotton cultivation could represent a viable sustainable management strategy.

Improved determination of nitrate isotopes in irrigated agricultural areas and Bayesian mixing model quantification of nitrate sources and fate

Technological advancements in isotope techniques have been widely utilized in environmental pollution research, particularly for the monitoring of nitrate pollution in water. The utilization of pretreatment with an aqueous nitric acid solution offers numerous advantages in analyzing isotopic composition; however, there is still room for improvement regarding conversion efficiency, reduced reaction time, and cost control. In light of this, this study proposes an enhanced chemical conversion method that involves mitigating the interference caused by the nitrogen azide reaction during the pretreatment process, optimizing the purge gas to remove interfering factors, and improving the inlet device for measuring nitrous oxide. The improved method was applied to determine nitrate isotopes in the Ulansuhai Basin, Inner Mongolia and its reliability was verified through analytical results obtained from bacterial denitrification methods. The mean δ15N-NO3- and δ18O-NO3- values determined using the chemical transformation method were 4.85‰ and 23.44‰, respectively. Compared with the previous method, the improved method enhanced the maneuverability of precise control, the pretreatment time was reduced from 2 to 3 hours to 1.5 hours, and the experimental cost was scaled down to half of the original one. In addition, the contribution of each source was calculated by combining nitrate isotopes with a Bayesian stable isotope mixing model. It was found that manure sewage accounted for (50.1±22.6) % while soil nitrogen sources contributed (25.1±20.4) % to nitrate levels in Ulansuhai Lake's water. The chemical conversion methods successfully improved within this study can also be applied to other watersheds or regions. These research findings provide a valuable theoretical foundation for managing nitrogen sources within watersheds.

Restoration of the soil fertility under Cr(VI) and artificial drought condition by the utilization of plant growth-promoting Bacillus spp. SSAU2.

The study explores the potential of an indigenous halo-tolerant microbe identified as Bacillus spp. SSAU-2 in enhancing soil fertility and promoting plant growth for sustainable agricultural practices under the influence of multiple abiotic stresses such as Cr(VI), high salinity, and artificial drought condition. The study investigated various factors influencing IAA synthesis by SSAU-2, such as pH (5 to 11), salinity (10 to 50g/L), tryptophan concentration (0.5 to 1%), carbon (mannitol mand lactose), and nitrogen sources (peptone and tryptone). The highest IAA concentration was observed at pH 10 (1.695mg/ml) and pH 11 (0.782mg/ml). IAA synthesis was optimized at a salinity level of 30g/l, with lower and higher salinity levels resulting in decreased IAA concentrations. Notably, the presence of mannitol and lactose significantly augmented IAA synthesis, while glucose and sucrose had inhibitory effects. Furthermore, peptone and tryptone played a pivotal role in enhancing IAA synthesis, while ammonium chloride exerted an inhibitory influence. SSAU-2 showed a diverse array of capabilities, including the synthesis of gibberellins, extracellular polymeric substances, siderophores, and hydrogen cyanide along with nitrogen fixation and ammonia production. The microbe could efficiently tolerate 45% PEG-6000 concentration and effectively produce IAA in 15% PEG concentration. It could also tolerate high concentration of Cr(VI) and synthesize IAA even in 50ppm Cr(VI). The findings of this study provide valuable insights into harnessing the potential of indigenous microorganisms to promote plant growth, enhance soil fertility, and establish sustainable agricultural practices essential for restoring the health of ecosystems.

Isolation of a facultative methanotroph Methylocystis iwaonis SD4 from rice rhizosphere and establishment of rapid genetic tools for it.

Methanotrophs of the genus Methylocystis are frequently found in rice paddies. Although more than ten facultative methanotrophs have been reported since 2005, none of these strains was isolated from paddy soil. Here, a facultative methane-oxidizing bacterium, Methylocystis iwaonis SD4, was isolated and characterized from rhizosphere samples of rice plants in Nanjing, China. This strain grew well on methane or methanol but was able to grow slowly using acetate or ethanol. Moreover, strain SD4 showed sustained growth at low concentrations of methane (100 and 500ppmv). M. iwaonis SD4 could utilize diverse nitrogen sources, including nitrate, urea, ammonium as well as dinitrogen. Strain SD4 possessed genes encoding both the particulate methane monooxygenase and the soluble methane monooxygenase. Simple and rapid genetic manipulation methods were established for this strain, enabling vector transformation and unmarked genetic manipulation. Fast growth rate and efficient genetic tools make M. iwaonis SD4 an ideal model to study facultative methanotrophs, and the ability to grow on low concentration of methane implies its potential in methane removal.

Large Flux Supply of NAD(H) under Aerobic Conditions by Candida glycerinogenes.

NAD is a redox coenzyme and is the center of energy metabolism. In metabolic engineering modifications, an insufficient NAD(H) supply often limits the accumulation of target products. In this study, Candida glycerinogenes was found to be able to supply NAD(H) in large fluxes, up to 7.6 times more than Saccharomyces cerevisiae in aerobic fermentation. Aerobic fermentation in a medium without amino nitrogen sources demonstrated that C. glycerinogenes NAD synthesis was not dependent on NAD precursors in the medium. Inhibition by antisense RNA and the detection of transcript levels indicated that the main NAD supply pathway is the de novo biosynthesis pathway. It was further demonstrated that NAD(H) supply was unaffected by changes in metabolic flow through C. glycerinogenes ΔGPD aerobic fermentation (80 g/L ethanol). In conclusion, the ability of C. glycerinogenes to supply NAD(H) in large fluxes provides a new approach to solving the NAD(H) supply problem in synthetic biology.

Optimization studies on laccase activity of Proteus mirabilis isolated from treatment sludge of textile industry factories : Optimization of laccase activity of Proteus mirabilis.

Laccase is an exothermic enzyme with copper in its structure and has an important role in biodegradation by providing oxidation of phenolic compounds and aromatic amines and decomposing lignin. The aim of this study is to reach maximum laccase enzyme activity with minimum cost and energy through optimization studies of Proteusmirabilis isolated from treatment sludge of a textile factory. In order to increase the laccase enzyme activities of the isolates, medium and culture conditions were optimized with the study of carbon (Glucose, Fructose, Sodium Acetate, Carboxymethylcellulose, Xylose) and nitrogen sources (Potassium nitrate, Yeast Extract, Peptone From Soybean, Bacteriological Peptone), incubation time, pH, temperature and Copper(II) sulfate concentration then according to the results obtained. Response Surface Method (RSM) was performed on six different variables with three level. According to the data obtained from the RSM, the maximum laccase enzyme activity is reached at pH 7.77, temperature 30.03oC, 0.5g/L CuSO4, 0.5g/L fructose and 0.082g/L yeast extract conditions. After all, the laccase activity increased 2.7 times. As a result, laccase activity of P. mirabilis can be increased by optimization studies. The information obtained as a result of the literature studies is that the laccase enzymes produced in laboratory and industrial scale are costly and their amounts are low. This study is important in terms of obtaining more laccase activity from P.mirabilis with less cost and energy.

Molecular and microbial insights towards anaerobic biodegradation of anionic polyacrylamide in oil sands tailings

Anionic polyacrylamide (A-PAM) is widely used as a flocculant in the management of oil sands tailings. Nevertheless, apprehensions arise regarding its potential biodegradation and environmental consequences within the context of oil sands tailings. Consequently, it is imperative to delve into the anaerobic biodegradation of A-PAM in oil sands tailings to gain a comprehensive understanding of its influence on tailings water quality. This work explored the dynamics of A-PAM biodegradation across concentrations: 50, 100, 250, 500, 1000, and 2000 mg/kg TS. The results showed a significant decrease in A-PAM concentration and molecular weight at lower concentrations (50 and 100 mg/kg TS) compared to higher ones, suggesting enhanced degradation efficiency. Likewise, the organic transformation and methane production exhibited dependency on A-PAM concentrations. The peak concentrations observed were 20.0 mg/L for volatile fatty acids (VFAs), 0.07 mg/L for acrylamide (AMD), and 8.9 mL for methane yield, with these maxima being recorded at 50 mg/kg TS. The biodegradation efficiency diminishes at higher concentrations of A-PAM, potentially due to the inhibitory effects of polyacrylic acid accumulation. A-PAM biodegradation under anaerobic condition did not contribute to acute toxicity or genotoxicity. SEM-EDS, FT-IR and XRD analyses further revealed that higher concentrations of A-PAM inhibited the biodegradation by altering floc structure and composition, thereby restricting the microbial activity. Major microorganisms, including Smithella, Candidatus_Cloacimonas, W5, XBB1006, and DMER64 were identified, highlighting A-PAM's dual role as a source of carbon and nitrogen under anaerobic conditions. The above findings from this research not only significantly advance understanding of A-PAM's environmental behavior but also contribute to the effective management practices in oil sands tailings.

Amidoximated‐Wood Derived Carbons as Advanced Self‐Standing Electrodes for Supercapacitor and Water Splitting

AbstractWood‐derived carbons demonstrate great potential as self‐standing electrodes in energy storage/conversion applications, including supercapacitors and water‐splitting devices. However, the key challenge remains the rational customization of surface functionalities for optimized performance. This study introduces an innovative approach to self‐standing wood‐derived carbons with tailored nitrogen and metal functionalities. In contrast to traditional impregnation techniques, which offer limited precision in surface modification, this approach entails the intentional attachment of amidoxime groups to the wood substrates. These groups serve as nitrogen sources, and create abundant surface anchoring sites for metal ions due to the chelation between the amidoxime groups and metals. The resulting carbons feature uniform and high dispersion of nitrogen and metal functionalities, along with a distinctive hierarchical porosity combining interconnected open channels with abundant mesopores. As a proof‐of‐concept, different metals are incorporated (i.e., Mn, Co, Ni) into the amidoximated‐wood precursors, and the resulting self‐standing carbons showcase excellent performance in both supercapacitors and water‐splitting applications. Leveraging the specific chelating ability of amidoxime groups toward metal ions, this strategy holds great potential as a generic approach to systematically tailoring the surface functionalities of carbon‐based materials for various electrochemical energy storage/conversion processes.

Rhizobia-diatom symbiosis fixes missing nitrogen in the ocean.

Nitrogen (N2) fixation in oligotrophic surface waters is the main source of new nitrogen (N) to the ocean1 and plays a key role in fueling the biological carbon pump2. Oceanic N2 fixation is almost exclusively attributed to cyanobacteria, even though genes encoding nitrogenase, the enzyme fixing N2 into ammonia, are widespread among marine bacteria and archaea3-5. Little is known about these non-cyanobacterial N2-fixers and direct proof that they can fix N in the ocean is missing. Here we report the discovery of a non-cyanobacterial N2-fixing symbiont, Candidatus Tectiglobus diatomicola, which provides its diatom host with fixed-N in return for photosynthetic carbon. The N2-fixing symbiont belongs to the order Rhizobiales and its association with a unicellular diatom expands the known hosts for this order beyond the well-known N2-fixing rhizobia-legume symbioses on land6. Our results show that the rhizobia-diatom symbiosis can contribute as much fixed-N as cyanobacterial N2-fixers in the tropical North Atlantic, and that they may be responsible for N2 fixation in the vast regions of the ocean where cyanobacteria are too rare to account for the measured rates.

Isolation, characterization and optimization of oleaginous Providencia vermicola as a feedstock for biodiesel production using Response Surface Methodology

Oleaginous organisms accrue more than twenty percent of their biomass as lipids and hence are promising feedstocks for biodiesel production. In this study, lipid accumulating bacteria were isolated from diesel-contaminated soils and screened with Sudan black B stain. The most oleaginous was done using 16s rRNA gene sequencing. Lipid production was initially optimized based on media, nitrogen source, pH and temperature. Response surface methodology (RSM) was then employed for the enhancement of lipid weight and content. Obtained lipid was converted to biodiesel using direct transesterification, and both lipid and biodiesel were characterized using FTIR. A total of thirteen bacteria were isolated and the most prominent lipid producer was identified as Providencia vermicola with lab number BA6. Preliminary optimization studies revealed optimum lipid production when nutrient broth and acetic acid served as carbon source; KNO3 as nitrogen source, pH 7.0 and 30 °C. Optimization using RSM resulted in a 5.1% and 74.1% increase in the biomass and lipid content of BA6 respectively. FTIR analyses confirmed the presence of functional groups characteristic of lipids and biodiesel. P. vermicola is a novel oleaginous organism that represents a promising feedstock for biodiesel production. HIGHLIGHTS The bacterium designated as BA6 identified as Providencia vermicola has the highest lipid contents of the oleaginous bacteria isolated. It accumulates lipids up to 47.73 % of its biomass The percentage lipids accumulation increased to about 74 % when RSM was used. Providencia vermicola is being reported as an oleaginous organism for the first time.

Real-time and specific monitoring of nitric oxide and evaluating of the oxidative stress in living cells and zebrafish under the pollutant exposure using a carbon dot-based composite fluorescent probe

Nitric oxide (NO) functions as an essential signalling molecule in various physiological and pathological pathways. In vitro and vivo redox processes mediated by reactive oxygen species (ROS) and nitric oxide (NO) directly influence the intracellular state. In this study, a red-emitting fluorescent nanoprobe, N,S-CDs@Zn-ICA, was synthesized to monitor NO fluctuations in living cells and zebrafish under the exposure to various pollutants. Red-emissive carbon dots (N,S-CDs) were synthesized by a hydrothermal method using o-phenylenediamine and urea as carbon / nitrogen sources, and H2SO4 as sulfur source. Glutathione (GSH) was introduced to link N,S-CDs with metal organic complexes (Zn-ICA) through an amidation reaction to fabricate a carbon dot-based composite fluorescent probe, which greatly improved the selectivity, stability, and response time of the N,S-CDs. The composite probe has high selectivity and sensitivity with limit of detection (LOD) of 96.0 nM. Furthermore, the proposed probe was successfully used to monitor the dynamic changes in NO levels and evaluate oxidative stress in MCF-7 cells and zebrafish under the exposure to various pollutants, including seven heavy metal ions (such as Pb2+, Cd2+, and Hg2+) and nine organic pollutants at different concentrations and exposure times. This work provides a novel strategy for constructing highly selective and red-emitting fluorescent probe for real-time and dynamic monitoring of NO and further evaluating oxidative stress induced by pollutants in vitro and in vivo via fluorescence imaging.

Optimization of fermentation conditions for the production of γ-aminobutyric acid by Lactobacillus hilgardii GZ2 from traditional Chinese fermented beverage system.

γ-Aminobutyric acid (GABA) is a crucial neurotransmitter with wide application prospects. In this study, we focused on a GABA-producing strain from a traditional Chinese fermented beverage system. Among the six isolates, Lactobacillus hilgardii GZ2 exhibited the greatest ability to produce GABA in the traditional Chinese fermented beverage system. To increase GABA production, we optimized carbon sources, nitrogen sources, temperature, pH, and monosodium glutamate and glucose concentrations and conducted fed-batch fermentation. The best carbon and nitrogen sources for GABA production and cell growth were glucose, yeast extract and tryptone. Gradual increases in GABA were observed as the glucose and monosodium glutamate concentrations increased from 10g/L to 50g/L. During fed-batch fermentation, lactic acid was used to maintain the pH at 5.56, and after feeding with 0.03g/mL glucose and 0.4g/mL sodium glutamate for 72h, the GABA yield reached 239g/L. This novel high-GABA-producing strain holds great potential for the industrial production of GABA, as well as the development of health-promoting functional foods and medical fields.

Nitrided Copper-Iron Composite Oxides Derived from Layered Double Hydroxides for Enhanced Carbon Dioxide Electroreduction to Methane and Formic Acid

The reduction of carbon dioxide to valuable chemical products is a promising solution to address carbon balance and energy issues. Herein, amorphous nitrided copper-iron oxides are prepared by gas-phase nitriding of CuFe-layered double hydroxide precursors with urea as nitrogen source. Amorphous materials are more likely to generate defect vacancies during the reaction process, and these vacancies can function as active sites for catalytic reactions. Therefore, the obtained materials show high activity for CO2 electroreduction to methane and formic acid, achieving a total Faraday efficiency of 74.7% at −0.7 V vs RHE and exhibiting a continuous 10 h durability in the H-cell. The uniformly distributed Cu+ sites act as active sites by losing electrons to activate CO2. During the CO2 electroreduction, CO2 is converted to *COOH via proton-electron coupling, *COOH combines directly with a proton in solution to produce the HCOOH product, and the other part of *COOH undergoes a protonated dehydration process to form the *CHO intermediate which dehydrates again to form CH4. This study provides a new approach for designing CO2 electroreduction catalysts.

Ethanolamine enhances adhesion, promotes microcompartment formation, and modulates gene expression in Levilactobacillus brevis ATCC 14869

ABSTRACT Ethanolamine is an abundant compound in the gastrointestinal tract and a valuable source of carbon and nitrogen for pathogenic bacteria harboring ethanolamine utilization (eut) genes. Eut-positive pathogens can consume free ethanolamine to outcompete commensal microbes, which often lack eut genes, and establish infection. Ethanolamine can also act as a host recognition signal for eut-positive pathogens to upregulate virulence genes during colonization. Therefore, reducing free ethanolamine titers may represent a novel approach to preventing infection by eut-positive pathogens. Interestingly, the commensal microorganism Levilactobacillus brevis ATCC 14869 was found to encode over 18 eut genes within its genome. This led us to hypothesize that L. brevis can compete with eut-positive pathogens by clearing free ethanolamine from the environment. Our results demonstrate that despite being unable to metabolize ethanolamine under most conditions, L. brevis ATCC 14869 responds to the compound by increasing the expression of genes encoding proteins involved in microcompartment formation and adhesion to the intestinal epithelial barrier. The improved intestinal adhesion of L. brevis in the presence of ethanolamine also enhanced the exclusion of eut-positive pathogens from adhering to intestinal epithelial cells. These findings support further studies to test whether L. brevis ATCC 14869 can counter enteric pathogens and prevent or reduce the severity of infections. Overall, the metabolic capabilities of L. brevis ATCC 14869 offer a unique opportunity to add to the armamentarium of antimicrobial therapies as well as our understanding of the mechanisms used by beneficial microbes to sense and adapt to host microenvironments.

Enhanced Production of Erythritol from Glucose by the Newly Obtained UV Mutant Yarrowia lipolytica K1UV15.

Erythritol is a polyol with a sweet taste but low energy value. Thanks to its valuable properties, as well as growing social awareness and nutritional trends, its popularity is growing rapidly. The aim of this study was to increase the effectiveness of erythritol production from glucose using new UV mutants of the yeast Yarrowia lipolytica obtained in the Wratislavia K1 strain. The ability of the new strains to biosynthesize erythritol and utilize this polyol was examined in shake-flask cultures and fed-batch processes conducted in a stirred tank reactor with a total glucose concentration of 300 and 400 g/L. The Wratislavia K1 strain produced erythritol most efficiently (97.5 g/L; 192 h) at an initial glucose concentration of 250 g/L (total: 300 g/L). New strains were assessed under such conditions, and it was noted that the highest erythritol concentration (145 g/L; 183 h) was produced by the K1UV15 strain. A significant improvement in the erythritol biosynthesis efficiency (148 g/L; 150 h) was achieved upon the increase in (NH4)2SO4 to 3.6 g/L. Further, in the culture with such a concentration of the nitrogen source and increased total glucose level (400 g/L), the K1UV15 strain produced 226 g/L of erythritol within 281 h.