Pyridine Nitrogen Research Articles

Defective wood-based chainmail electrocatalysts boost performances of seawater-medium Zn-air batteries

A high-activity and stable bifunctional oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) electrocatalyst is critical for seawater-based Zn-air batteries (ZABs). Herein, we report a wood-derived chainmail electrocatalyst containing defective nitrogen-doped carbon nanotubes encapsulating cobalt nanoparticles (Co@D-NCNT/CW) to enhance the ORR/OER activity and stability in seawater medium. During the preparation process, the introduction and removal of Zn increased the defect sites and pyridine N content in the carbon material, modulating charge distribution and influencing the adsorption and activation processes. The highly ordered open channels in Co@D-NCNT/CW promoted mass transfer of reactants and accelerated gas diffusion. The resultant chainmail electrocatalyst exhibited impressive bifunctional ORR and OER activities with an ultra-low gap of 0.67 V in seawater-based alkaline electrolyte. The Co@D-NCNT/CW-assembled seawater-based rechargeable liquid ZABs demonstrated a maximum power density of 245.3 mW cm−2 and a long-term cycling performance over 500 h. The seawater-based all-solid-state ZABs achieved the maximum power density of 48.2 mW cm−2 and stabilized over 30 h. Density functional theory revealed that the presence of defects and pyridine nitrogen in Co@D-NCNT/CW modulated the electronic structure of Co, optimizing the binding affinity of the Co sites with intermediates and weakening Cl− adsorption. This work provides a new approach to preparing high-activity and stable ORR/OER electrocatalyst utilizing wood nanostructures, boosting the development of seawater-based ZABs.

Modality-Tunable Exfoliated N-Doped Graphene as Effective Electrolyte Additive for High-Performance Lithium-Sulfur Batteries.

While chemically doped graphene has shown great promise, the lack of cost-effective manufacturing has hindered its use. This study utilizes a facile fabrication approach for modality-tunable N-doped graphene via thermal annealing of aqueous-phase-exfoliated few-layered graphene from a Taylor-Couette reactor. This method demonstrates a high level of N-doping (27 atom % N) and offers modality tunability of the C-N bond without foregoing scalability and green chemistry principles. The resulting N-doped graphene, with varying N content and doping modality, is utilized in the lithium-sulfur battery electrolyte to address low ionic conductivity, lithium polysulfide (LiPS) shuttling, and Li anode instability. The study reveals that higher N content and pyridinic N modality graphene in the electrolyte positively influence battery performance. The results are 2-fold: higher overall N content improves capacity retention (73%) after 225 cycles at 0.2 C, and pyridinic-type nitrogen demonstrates the best performance at high C rates, exhibiting a 4-fold capacity increase relative to the reference cell at 2 C. Further, the computational study validates the adsorption affinity of LiPS to pyridinic nitrogen and improved Li+ mobility on the graphene backbone observed experimentally. This first experimental study on the impact of N-dopant concentration and modality on electrochemical performance provokes insights into tailoring N functionalization to achieve superior electrochemical performance.

Pinning Down Small Populations of Photoinduced Intermediates Using Transient Absorption Spectroscopy and Time-Dependent Density Functional Theory Difference Spectra to Provide Mechanistic Insight into Controlling Pyridine Azo Dynamics with Protons.

In this work, the impact of protonation on the photoisomerization (trans → cis) and reversion (cis → trans) of three pyridine-based azo dyes (PyrN) is investigated by using a combination of transient absorption spectroscopy and time-dependent density functional theory computed difference spectra. The photophysical behaviors of the PyrN dyes are altered by the addition of one or two protons. Protonation of basic pyridine nitrogens results in an ultrafast accelerated reversion mechanism after photoisomerization, while protonation of azo bond nitrogens restricts cis isomer formation entirely. Computed difference spectra provide spectral signatures that are critical for the assignment of low-population long-lived states, providing direct evidence of the accelerated reversion mechanism. Thus, the addition of organic acids can selectively control the photophysics of azo dyes for a wide range of applications, including materials design and pharmaceuticals.

Multilayer Porous Fe/Co-N-MWCNT Electrocatalyst For Rechargeable Zinc-Air Batteries.

The design of efficient, stable, low-cost non-precious metal-based electrocatalysts with enhanced oxygen reduction reaction (ORR) activity has garnered significant attention in the scientific community. This study introduces a novel electrocatalyst, Fe/Co-N-MWCNT, synthesized through the in-situ growth of ZIF-8 and Fe/Co-Phen on multi-walled carbon nanotubes (MWCNTs), followed by pyrolysis at varying temperatures to optimize its properties. The inclusion of Fe and Co during the pyrolysis process facilitated the creation of metal active sites and Fe-Co, enhancing electron transfer and ORR activity. Compared to Pt/C (E1/2=0.854 V, JL=4.90 mA cm-2), Fe/Co-N-MWCNT exhibited a similar half-wave potential (E1/2=0.812 V) and an improved limiting current density (JL=5.37 mA cm-2). Moreover, Fe/Co-N-MWCNT displayed remarkable stability, showing only a 7 mV negative shift in E1/2 after 2000 cycles. Ampere response testing indicated a current decay of only 7.8 % for Fe/Co-N-MWCNT after 10000 s, while Pt/C experienced a decay of about 18.4 %. The exceptional catalytic stability of Fe/Co-N-MWCNT positions it as a promising candidate for rechargeable zinc-air batteries, attributed to its high pyridinic nitrogen content, unique structure, and abundant metal active sites.

Bifunctional electrode materials: Enhancing microbial fuel cell efficiency with 3D hierarchical porous Fe3O4/Fe-N-C structures

The rational development of high-performance anode and cathode electrodes for microbial fuel cells (MFCs) is crucial for enhancing MFC performance. However, complex synthesis methods and single-performance electrode materials hinder their large-scale implementation. Here, three-dimensional hierarchical porous (3DHP) Fe3O4/Fe-N-C composites were prepared via the hard template method. Notably, Fe3O4/Fe-N-C-0.04-600 demonstrated uniformly dispersed Fe3O4 nanoparticles and abundant Fe-Nx and pyridinic nitrogen, showing excellent catalytic performance for oxygen reduction reaction (ORR) with a half-wave potential (E1/2) of 0.74 V (vs. RHE), surpassing Pt/C (0.66 V vs. RHE). Moreover, Fe3O4/Fe-N-C-0.04-600 demonstrated favorable biocompatibility as an anode material, enhancing anode biomass and extracellular electron transfer efficiency. Sequencing results confirmed its promotion of electrophilic microorganisms in the anode biofilm. MFCs employing Fe3O4/Fe-N-C-0.04-600 as both anode and cathode materials achieved a maximum power density of 831.8 ± 27.7 mW m−2, enduring operation for 38 days. This study presents a novel approach for rational MFC design, emphasizing bifunctional materials capable of serving as anode materials for microorganism growth and as cathode catalysts for ORR catalysis.

Boosting the activity of nitrogen-doped carbon catalyst by the guided formation of active sites and enhanced scavenging on reactive oxygen species under the regulation of cerium

The design of nitrogen-doped carbon materials with high density of active sites is of paramount importance for catalysis of the oxygen reduction reaction (ORR). Herein, an efficient oxygen reduction electrocatalyst (CL-Fe/(Fe,Ce)xOy-NC) is developed by planting carbon nanotubes with encapsulated Fe/(Fe,Ce)xOy particles on porous carbon polyhedron particles derived from calcinated ZIF-8 framework. The introduction of Ce evidently promotes the formation of pyridinic nitrogen, graphitic nitrogen and metal nitrogen species in carbon matrix, enhancing the catalytic activity towards the ORR. The Ce oxide in the catalyst effectively scavenges the active oxygen species in ORR process. Under the synergistic effect of high specific surface area with Ce species, the CL-Fe/(Fe,Ce)xOy-NC has a better half-wave potential (0.861 V vs. RHE), faster kinetics (44.13 mV dec−1) and is more stable than the commercial Pt/C catalyst. The zinc-air battery assembled with CL-Fe/(Fe,Ce)xOy-NC has the highest power density of 195 mW cm−2, energy density of 858 Wh kg−1, and better durability. This work presents a novel approach to enhance the efficacy of nitrogen-doped carbon-based catalysts, paving a possible way to substitute the precious platinum catalysts for a variety of electrochemical energy devices.

Unveiling the Role of Pyridinic Nitrogen and Diacetylene in the Hydrogen Evolution Reaction through Model Catalysts Prepared by On-Surface Reactions.

Metal-free carbon materials (MFCMs) have extensive applications in electrocatalysis because of their comparable catalytic activity to that of Pt/C in some cases. Understanding the structure-property relationship is crucial for the reasonable design of more efficient catalysts. To reveal the structure-property relationship of the hydrogen evolution reaction (HER), we prepared nanowire model catalysts on single-crystalline Au(111) electrodes through state-of-the-art on-surface synthesis. Temperature-dependent experiments were conducted to evaluate the HER activity of the nanoribbons functionalized with pyridinic nitrogen and diacetylene. According to our electrochemical results (overpotential, current density j0, and apparent activation energy), we demonstrate that the participation of diacetylene can promote the catalytic reaction for the HER through a synergistic effect. Based on the analysis of the activation entropy for the model catalysts, we attribute the synergistic effect of diacetylene groups to the large area of π···H-O bonding in the electric double layer, thus providing direct insight into the structural-property relationship of polymerized nanoribbons for the HER through the rational design of precursor structures. The nanoribbons prepared by on-surface synthesis can serve as prototype systems for model catalytic research on MFCMs.

Nitrogen and Oxygen Dual‐Doped Carbon as High‐Rate Long‐Cycle‐Life Anode Materials for Lithium‐Ion Batteries

Defect‐type carbon, doped with nitrogen and oxygen, is synthesized using the high‐temperature solid‐phase method. X‐ray photoelectron spectroscopy analysis reveals the presence of nitrogen, including pyridine nitrogen, pyrrole nitrogen, and graphitized nitrogen, incorporated into the carbon structure. Additionally, oxygen is introduced into carbon, with both CO and CO functionalities are observed. Transmission electron microscopy and scanning electron microscopy indicate that all samples exhibit a morphology of carbon microblocks with localized turbocharged lattice regions. Electrochemical tests demonstrate that the nitrogen‐ and oxygen‐doped carbon microblocks exhibit excellent cycling performance and high rate capacity. Specifically, at current densities of 1 and 2 A g−1, the rate capacity remains at 385.6 and 214.4 mA h g−1, respectively. Furthermore, the discharge capacity at 5 A g−1 remains at 58.3 mA h g−1 on the 3500th cycle. The defects introduced by nitrogen and oxygen doping not only enhance reactivity and electronic conductivity but also improve lithium‐ion diffusion dynamics.

Controlling the optoelectronic properties of nitrogen-doped carbon quantum dots using biomass-derived precursors in a continuous flow system

The synthesis of carbon quantum dots (CQDs) from high molecular weight biomass-derived precursors poses a significant challenge due to the complex molecular structures and low conversion efficiency. This work demonstrates a green, rapid, and sustainable continuous hydrothermal flow synthesis (CHFS) approach for nitrogen-doped carbon quantum dots (NCQDs) from various biomass-derived precursors, including high molecular weight polymeric sources like chitosan, lignin, and humic acid. We find that the precursor structure significantly impacts the size of the fabricated NCQDs and their optical properties. Citric acid, a low molecular weight precursor, yields NCQDs with excitation-independent emission, higher quantum yields, and low non-radiative losses, while NCQDs derived from polymeric precursors exhibit excitation-dependent, red-shifted, and lower efficiency emission. Theoretical calculations, performed to understand the configuration and distribution of nitrogen dopants within the NCQD structure, show that pyridinic and graphitic nitrogen atoms exhibit a strong preference to aggregate near the centre of the edge of the NCQD and not in the vertices nor in the graphitic core, thus affecting the HOMO and LUMO, bandgap, and light absorption and emission wavelengths. The life cycle assessment (LCA) analysis highlights the green and scalable advantages of the CHFS process for producing NCQDs compared to batch methods, making it a sustainable and economically viable approach for large-scale NCQD synthesis from high molecular weight biomass-derived precursors. Hence, the combination of experimental data and theoretical calculations provides a comprehensive understanding of the structure-property relationships in these NCQDs.

Aminotriazine derived N-doped mesoporous carbon with a tunable nitrogen content and their improved oxygen reduction reaction performance.

The electrocatalytic activity of carbon materials is highly dependent on the controlled modulation of their composition and porosity. Herein, mesoporous N-doped carbon with different amounts of nitrogen was synthesized through a unique strategy of using a high nitrogen containing CN precursor, 3-amino 1,2,4 triazine (3-ATZ) which is generally used for the preparation of carbon nitrides, integrated with the combination of a templating method and high temperature treatment. The nitrogen content and the graphitisation of the prepared materials were finely tuned with the simple adjustment of the carbonisation temperature (800-1100 °C). The optimised sample as an electrocatalyst for oxygen reduction reaction (ORR) exhibited an onset potential of 0.87 V vs. RHE with a current density of 5.1 mA cm-2 and a high kinetic current density (Jk) of 33.1 mA cm-2 at 0.55 V vs. RHE. The characterisation results of the prepared materials indicated that pyridinic and graphitic nitrogen in the carbon framework promoted ORR activity with improved four-electron selectivity and excellent methanol tolerance and stability. DFT calculations demonstrated that the structural and planar defects in the N-doped carbon regulated the surface electronic properties of the electrocatalyst, leading to a reduction in the energy barrier for the ORR activity. This strategy has the potential to unlock a platform for designing a series of catalysts for electrochemical applications.

Nitrogen-rich carbon nanosheets supported copper catalysts for oxidative carbonylation of ethanol

Two-dimensional (2D) nitrogen-rich carbon nanosheets NC-x with a nitrogen content of 5.2 %-6.8 wt% were characterized by a one-step co-pyrolysis method and employed as Cu catalyst supports for oxidative carbonylation of ethanol. Carbon nanosheets with abundant nitrogen defects were achieved by tuning the dosage of ammonium oxalate, in which the Cu/NC-12 catalyst performed excellent activity. Furthermore, Cu/NC-x catalysts presented significantly superior catalytic activity than that of copper/carbon nanosheets (Cu/C) catalyst, it can be ascribed to the most suitable nitrogen doping to promote the exposure and dispersion of Cu species and pyridine nitrogen served as the main anchor sites to increase the ratio of Cu+/(Cu++Cu0). Density functional theory calculations further proved that introducing nitrogen atoms into carbon nanosheets effectively reinforced binding to Cu4 and adsorption of intermediates with NC, and a remarkable activity on Cu/NC-12 was achieved by a more favorable insertion of CO in the rate-determining step.

Graphene with suitable-size nitrogen-doped cavity being an excellent photocatalyst for proton-coupled electron transfer in water splitting

Aiming to attain porous carbon nitride photocatalysts with high specific surface area, abundant active sites, broad absorption range and effective electron-hole separation, we remove carbon rings from graphene and replace all the edge carbon atoms of the cavity with nitrogen atoms. The accurate electronic structures and exciton properties of the proposed materials are revealed by the ab initio many-body Green's function theory. Computational results show that the absorption of the designed materials can cover both the visible and the near-infrared light region. The exciton binding energies of the materials are one order of magnitude lower than those of the typical two-dimensional photocatalyst graphitic carbon nitride. Due to the formation of hydrogen bonds between pyridinic nitrogen atoms and water molecules during water splitting, the key excited-state proton-coupled electron transfer reactions are barrierless. These findings could serve as guidelines for the realization of high-performance metal-free two-dimensional photocatalysts.

Copper nanoparticles anchored on nitrogen-doped carbon nanofibers derived from MOFs and bacterial cellulose: Advanced electrocatalysts for oxygen reduction in microbial fuel cells

The development of efficient and inexpensive cathode catalysts contributes to energy conservation. Herein, nitrogen-doped carbon nanofiber (CNF) composites (Cu@N-CNFs) loaded with copper nanoparticles were successfully synthesized as cathode electrocatalysts for microbial fuel cells (MFCs), utilizing metal-organic frameworks (MOFs) and bacterial cellulose (BC) as precursors. The characterization results show that Cu@N-CNFs has a large specific surface area and contains catalytic active substances such as pyridine nitrogen and graphite nitrogen, along with that the graphitization degree of carbon skeleton structure is high. Therefore, Cu@N-CNFs has outstanding catalytic performance in alkaline and neutral environments, with half-wave potentials of 0.83 V and 0.78 V, as well as limiting current densities of −5.70 mA cm−2 and −5.73 mA cm−2, respectively. Moreover, these performances are comparable to those of Pt/C. The composite material is coated on the surface of the carbon cloth and processed into MFC cathode, which has a good improvement in its power production performance.

Role of Pyridine Nitrogen Position on the Moisture Sensitivity of Organic Emitters.

Moisture-sensitive fluorescent emitters are a class of smart materials that can change their emission behavior upon exposure to water. In this study, we have synthesized two highly fluorescent organic emitters, 4BPy-PTA and 2BPy-PTA, and showed how moisture sensitivity can be enhanced by molecular design modification. Owing to the different nitrogen atom positions in the acceptor units, the emitters show different degrees of moisture sensitivity. Upon moisture exposure, both emitters change their emission color from greenish-yellow to blue, but a larger shift was witnessed in 4BPy-PTA (81 nm) than in 2BPy-PTA (68 nm). Moisture exposure enhances the photoluminescence quantum yield (PLQY) of 4BPy-PTA from 37 to 48%, whereas it suppresses the PLQY of 2BPy-PTA from 59 to 15%. A shorter moisture sensing time, large emission color shift, and enhanced PLQY make 4BPy-PTA a better moisture-sensitive material than 2BPy-PTA. Interestingly, the emission colors of the emitters can be completely regained by heating and partially by applying mechanical force to the moisture-exposed solids. In addition, these emitters also show mechanochromic luminescence behavior with a completely reversible emission color switch between blue and green.

Eco-friendly sustainable fluorescent coal-based carbon dots as a highly selective probe for Cu2+detection

Carbon dots as fluorescent probes exhibit brilliant sensitivity and selectivity in copper ion detection, which greatly depends on their microstructure. Herein, a mild oxidation method was adopted to tailor the organic macromolecules of coal and its derivatives for preparing coal-based carbon dots. Such coal-based carbon dots comprise a carbonaceous center dominated by sp2 microcrystalline carbon, surface defects formed by sp3 amorphous carbon, and oxygen/nitrogen-containing functional groups. The coal-based humic acid-based carbon dots (HA-CDs) exhibit high dispersity (∼7.6 nm), high sp2 microcrystalline carbon (61.73 %), abundant carboxyl groups (2.09 %), hydroxy groups (8.93 %), and pyridinic nitrogen (1.06 %). Due to their unique microstructure, the HA-CDs in aqueous solutions exhibit prominent fluorescence stability under different pH conditions and show superior selectivity and sensitivity to Cu2+ even in the existence of other metal ions. Within the concentration range of 0–40 µmol/L, the fluorescence intensity of HA-CDs linearly correlates with the concentration of Cu2+. The limit of detection is 0.014 µmol/L, allowing for tracing the Cu2+ concentration in flowing water. This work affords a novel idea for the microstructure design of high-sensitivity carbon dots for Cu2+ detection in the water environment.

Optimizing sodium storage mechanisms and electrochemical performance of high Nitrogen-Doped hard carbon anode materials Derived from waste plastics for Sodium-Ion batteries

The development of high-performance hard-carbon (HC) anode materials for sodium-ion batteries was constrained by slow charge-transfer kinetics and sodium-storage mechanisms. In this paper, high nitrogen-doped (12.24 %) HC with an efficient interworking structure was synthesized in situ using waste plastics as precursors by utilizing the strong 2-D self-template effect of guanine. Elucidating the mechanism of sodium storage in heteroatom-doped carbon with coexisting heterocyclic and graphitic nitrogen, which synergistically enhances electrochemical activity, utilizing a range of in-situ and ex-situ characterization methods. Based on density functional theory (DFT), it has been discovered that the doping of pyrrole nitrogen (N5) and pyridinium nitrogen (N6) can effectively expand the interlayer spacing during the Na+ sodiated/de-sodiated process, thereby enhancing electrochemical activity. The optimized HC has increased the Na+ diffusion coefficient by 1.5 orders of magnitude (10-8.2 cm2 s−1 vs 10-9.76 cm2 s−1) and exhibits high reversible capacity (452 mAh/g@20 mA g−1), high rate performance (388mAh/g@500 mA g−1), superior cycling stability (87.6 % @500 mA g−1 after 2,000 cycles). The full cell exhibits good cyclic stability (91.87 %@100 mA g−1 after 2,00 cycles), while the designed pouch cell also demonstrates favorable cycle life (90.78 %@200 mA g−1 after 100 cycles).

Influence of Nitrogen-Doped Carbon Dots on H• Radical-Mediated Au-H Formation in the Hydrogenation of 4-Nitrophenol Using NCDs-Au Nanohybrids.

The hydrogenation of 4-nitrophenol using carbon dot-stabilized gold (Au) nanoparticles is well-studied, with Au-H species known to catalyze the reaction. However, the impact of specific nitrogen moieties in nitrogen-doped carbon dots on Au-H formation and catalytic activity remains unexplored. These nitrogen species, acting as surface ligands, may influence the catalytic properties through the generation of Au-H species via H• radicals. In this regard, modulation of the catalytic properties of Au nanoparticles has been explored by conjugating their surface with nitrogen-doped carbon dots (NCDs). Three distinct nanohybrid formulations comprising NCDs and Au nanoparticles (i.e., NCDs-Au) have been prepared, where the NCDs were derived from different carbon sources (e.g., citric acid and l-malic acid) and varying mole ratios of the nitrogen source (i.e., urea). The impact of NCDs on Au nanoparticle-mediated catalysis has been investigated using the model reaction of hydrogenation of 4-nitrophenol (4-NP) in the presence of NaBH4. The fractions of different nitrogen species (such as pyrrolic, pyridinic, and amidic) in the different NCDs-Au nanohybrids were quantified through XPS analysis, and their roles in catalytic performance have been studied. Further, the size, shape, crystallinity, defects, and exposed facets of the NCDs-Au nanohybrids have also been assessed (through XRD, HRTEM, and Raman studies), and their structure-activity relationships have been corroborated. The hydrogenation of 4-NP is proposed to happen through the formation of gold-hydride (Au-H) species facilitated by H• radicals, as confirmed by EPR analysis. The NCDs-Au nanohybrid, synthesized from NCDs derived from a 1:3 molar ratio of l-malic acid and urea (MU13-Au), exhibits superior catalytic efficiency with a rate constant of 1.013 min-1, attributed to its abundant defects and a notably high relative content of catalytically favorable pyridinic nitrogen species compared to other tested nanohybrids.

Tailoring surface terminals of Ti3C2Tx MXene microgels via interlayer domain-confined polyphosphate ammonium for flexible supercapacitor applications

The MXene material shows potential for flexible energy storage devices due to its high pseudocapacitance and mechanical flexibility. However, MXene nanosheet self-stacking and –F terminal functional groups can hinder active site and ion dynamics, thus affecting the energy storage performance. Herein, we present an interlayer domain-confined strategy that involves the introduction and crosslinking of ammonium polyphosphate (APP) confined to the interlayer of Ti3C2Tx MXene sheets, which induces gelation of the MXene to form a 3D network structure and enlarge their interlayer spacing. And then the cross-linked APP is converted into nitrogen and phosphorus terminals on Ti3C2Tx MXene via thermal treatment. The nitrogen terminals in the form of the pyrrole nitrogen and pyridine nitrogen, and phosphorus terminals of P–O bonds enhance the activity of the redox reaction and the dynamics of the ions, resulting in the boosted energy storage capacity of MXene. The density functional theory (DFT) calculations reveal that nitrogen-phosphorus co-doping modulates the surface electronic states of MXene and contributes to the increase of the electrical conductivity of Ti3C2Tx MXene. As a supercapacitor electrode, Ti3C2Tx MXene with N/P terminals exhibits a higher specific capacitance of 597.8 F/g (1777F cm−3) than the raw Ti3C2Tx MXene (384 F/g). In addition, the quasi-solid state flexible symmetric supercapacitor assembled by Ti3C2Tx MXene with N/P terminals can achieve an energy density of 12.5 Wh kg−1 at a power density of 250 W kg−1. Therefore, this work provides a new strategy for terminal modification of MXene and high-performance MXene supercapacitors.

Synergistic Effect of Lactam and Pyridine Nitrogen on Polysulfide Chemisorption and Electrocatalysis in Lithium Sulfur Batteries.

Sulfur undergoes various changes, including the formation of negative charge-bearing lithium polysulfides during the operation of Li-S batteries. Dissolution of some of the polysulfides in battery electrolytes is one of the reasons for the poor performance of Li-S batteries. The charge injection into the sulfur and polysulfides from the electrode is also a problem. To address these issues, a small-molecule additive, 3,6-di(pyridin-4-yl)-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione, was designed and synthesized with carbonyl oxygen atoms and two types of nitrogen. The pyridinic nitrogen increases the electronegativity of the carbonyl oxygen atoms. The pyridinic nitrogen, carbonyl oxygen, and lactam nitrogen provide multiple binding sites concurrently to the polysulfides, which increases the binding efficiency between the additive and polysulfides. A control molecule without the pyridine moiety displayed decreased binding to lithium polysulfides. Furthermore, the band edges of lithium polysulfide and 3,6-di(pyridin-4-yl)-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione are commensurate for efficient charge transfer between them, leading to the efficient electrocatalysis of lithium polysulfides. The cyclic voltammogram of the Li-S battery fabricated with 3,6-di(pyridin-4-yl)-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione exhibited sharp and well-defined peaks, confirming the formation of Li2Sy (where y varies between one and eight) from S8. These Li-S batteries showed a specific capacity of 950 mA h/g at 0.5 C, with a capacity retention of 70% at the 300th cycle. The pyridine-free control molecule, 3,6-diphenyl-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione, showed relatively poor performance in a Li-S battery.

Azopyridinium Ionic Photoswitches: Tuning Half-Lives of Z Isomers from Seconds to Days in Water.

Herein, we describe water-soluble heteroaryl azopyridinium ionic photoswitches (HAPIPs). We aim to combine variations in five-membered heterocycles, their substitutions, N-alkyl groups at pyridinium nitrogen, the position of pyridinium center relative to azo group, counterions, and solvents, in achieving better photoswitching. Through these studies, we successfully tuned the half-life of Z isomers of the resultant HAPIPs between seconds to days in water. Extensive spectroscopic studies and density functional theory (DFT) computations unravelled the factors responsible for thermal relaxation behavior. Considering the versatility of these photoswitches, the tunability of half-lives and photoswitching in aqueous medium allows the scope of applications in several fields.