Nitro Explosives Research Articles

Multifunctional N-fused fluorescent probes for detection of iron ions and nitro explosives

In this work, two novel probes 4a and 4b were synthesized through Suzuki-Miyaura coupling reaction, whose structures were further confirmed by 1H NMR, 13C NMR, high-resolution mass spectrometry (HRMS) and X-ray single crystal diffraction. The optical properties of the obtained molecules were investigated accordingly. Owing to different bridging fluorophores, there are certain differences in optical performance and detection ability between the two synthesized compounds. Especially, due to the subtle difference in orbitals energy and electron distribution displayed by the DFT calculations, 4a possesses the characteristics of dual-state emission (DSE) molecule, while 4b is an aggregation-induced emission (AIE) molecule. Interestingly, these two molecules can be developed into multifunctional detection probes, successfully applied for the fluorescence recognition of iron ions and common nitroaromatic compounds (NACs). At the same time, the probe molecules can also be applied to the detection of NACs in aqueous environment. What’s more, they can also be loaded on test strips and thin-films for fluorescence identification of NACs, thus being expected to be developed into portable detection tools for NACs.

Two three-dimensional coordination polymers as fluorescence probes for the detection of nitrobenzene, tetracycline, fluazinam and their application in green pepper

Two coordination polymers (CPs), [Zn5(L)2(phen)5](1) and [Cd2(HL)(2,2-bpy)(H2O)3](2), were synthesized by using 2′,3,3′,5,5′-Diphenyl ether pentacarboxylic acid (H5L), phenanthroline (phen), and 2,2′-bipyridine (2,2′-bpy) under hydrothermal conditions. The L5- ligand adopts the μ6-к2: к2: к1: к1: к1: к1 mode in 1 and the μ5-к2: к2: к2: к2: к1 mode in 2. Sensing experiments show that 1 and 2 are fluorescence probes with high sensitivity and rapid detection of nitro explosives, antibiotics, and pesticides. In order to verify the ability of 2 to detect FLU in actual samples, we performed a spiked recovery experiment in green pepper water. The spiked recoveries were 97.77–101.18 %. Interestingly, because H5L is not completely deprotonated in 2, there is abundant hydrogen bonding, which makes the fluorescence quenching rate higher and the detection limit lower. The possible fluorescence quenching mechanism of 1 and 2 can be explained by their UV–VIS absorption spectra and orbital energy levels.

Effect of structure on sensing performance of nitro explosives with high sensitivity and mechanism of two Tb(III) coordination polymers

The use of a conjugate N-containing ligand resulted in the decreasing of structural dimensions from 2D network of [Tb(2-pyia)(Ac)(H2O)] (CP1) to 1D chain [Tb(2-pyia)(Ac)(IDP)] (CP2) (2-H2pyia = 5-(pyridin-2-ylmethoxy) isophthalic acid and IDP=imidazo[4,5-f]-[1,10] phenanthroline). Both of them exhibit the characteristic luminescence of Tb ions and could have high fluorescence sensing properties for cefixime and fluridine. The different sensing properties for nitro explosives are manifested as CP1 for nitrobenzene and CP2 for 4-nitrophenol due to the difference in structure. Furthermore, CP2 exhibits the ratiometric fluorescence sensing for Fe3+ ion with a low detection limit of 0.405 μM. The fluorescence sensing mechanism of the two Tb complexes for different analytes was investigated using experimental methods and theoretical calculations. CP1 was used for the detection of Flu residues in the actual system and better results were obtained. The work shows the introduction of the chelated ligand might affect the structural and sensing performance changes of coordination polymers.

Investigating the impact of two representative nitro explosives on the thermal decomposition mechanism of DNTF through ab initio molecular dynamics.

To investigate the influence of two typical nitro explosives, 2,6-diamino-3,5-dinitropyrazine-1-oxide (LLM-105) and nitroguanidine (NQ), on the thermal decomposition mechanism of 3,4-Bis (3-nitrofurazan-4-yl) furoxan (DNTF). The study simulates the dynamical behavior of the DNTF/DNTF, DNTF/NQ, and DNTF/LLM-105 systems at different temperatures. We analyzed their thermal decomposition mechanisms through decomposition processes, reaction paths, and product evolution. Building on our analysis of thermal decomposition mechanisms, we found that introducing these two components (NQ and LLM-105) significantly alters the decomposition mechanism of DNTF. This introduction promotes the breakdown of DNTF molecules, modifies the thermal decomposition processes, and consequently changes the reaction pathways. In the DNTF/DNTF system, the product C3N4O4 remains stable, while the N-O bond in NO2 undergoes repeated breaking and formation, ultimately converting into NO. Conversely, in the mixed system, NO2 persists throughout the simulation, while the reaction product C3N4O4 undergoes additional reactions and eventually disappears at higher temperatures. This behavioral disparity determines distinct decomposition mechanisms between the mixed and pure DNTF systems. To investigate the thermal decomposition mechanisms of DNTF/LLM-105 and DNTF/NQ composite energetic materials, the first-principles calculation software CP2K is used. The GFNI-xTB (Geometry, Frequency, and Noncovalent, eXtended Tight Binding) program within CP2K is employed. This method provides a powerful tool for performing calculations with arbitrary accuracy on complex systems.

A multifunctional sensor for detecting tetracycline, 4-nitrophenol, and pesticides

In recent years, due to the abuse of antibiotics, nitro explosives and pesticides, which have caused great harm to the environment and human health, social concerns have prompted researchers to develop more sensitive detection platforms for these pollutants. In this paper, a novel two-dimensional Zn (II) coordination polymer, [Zn(L)0.5(1,2-bimb)]·DMF (1), [H4L=[1,1′:4′,1′’-terphenyl]-2, 2′’,4, 4′’ −tetracarboxylic acid, 1,2-bimb = 1,2-bis(imidazol-1-ylmethyl)benzene] was synthesized using a hydro-solvothermal method. Among commonly used organic solvents, 1 exhibits significant stability. Fast and efficient fluorescence response can be achieved for tetracycline (TET), 4-nitrophenol (4-NP), fluazinam (FLU), and abamectin benzoate (AMB) with low detection limits. A binary intelligent logic gate device with FLU and AMB as chemical input signals is successfully constructed, which provides a new idea for biochemical detection. In addition, a portable visual test paper has been prepared, which has high sensitivity, good selectivity, and simple operation. It can be used for rapid detection of pollutants in daily life and has broad application prospects. Finally, a detailed discussion was conducted on the fluorescence sensing mechanism of 1 for detecting TET, 4-NP, AMB and FLU.

Micro-scale crystallization thermodynamics study of typical energetic compounds integrating optofluidics and machine learning

With the aim of investigating the changing law of crystallization driving force of typical energetic compounds under micro-scale crystallization conditions, a thermodynamic parameter determination method based on optofluidics was proposed. Aimed at nitro, nitramine and nitrate explosives in energetic compounds, hexanitrostilbene (HNS), cyclotetramethylene tetranitramine (HMX) and pentaerythritol tetranitrate (PETN) were selected as representatives, the solubility of the three kinds of energetic compounds in their respective commonly used solvents (HNS: in DMF, DMSO, NMP; HMX: in DMF, DMSO, CYC; PETN: in DMF, DMSO, EAc) at different temperatures were determined. Furthermore, microfluidics and machine learning were combined, the solubility data of the explosives were processed using BP neural network. Moreover, the metastable zone widths of HNS, HMX and PETN in each solvent were determined using on-line Raman technique. Additionally, crystalline thermodynamic parameters such as solid–liquid interfacial tension, crystal surface entropy factor, enthalpy of dissolution and etc. were calculated for each system.

Sensitive electrochemical determination of 3-nitro-1,2,4-triazol-5-one (NTO) by the gold nanoparticles-decorated glassy carbon and smartphone-integrated screen-printed electrodes based on polyethyleneimine linked with crosslinking agent glutaric dialdehyde

Rapid and sensitive voltammetric methods for 3-nitro-1,2,4-triazol-5-one (NTO) determination are scarce in the literature. In the present research, we reported a crosslinked polyelectrolyte-based modified electrode decorated with gold nanoparticles that can be easily formed on the surfaces of both screen-printed electrodes (SPEs) and glassy carbon electrodes (GCEs) for the first time, as well as a voltammetric method for the electrochemical determination of NTO. Cobalt-amine sites formed between PEI and cobalt(II)-acetylacetonate (CoAcAc, an electrocatalyst) are used as a redox mediator. Electrochemical reduction of NTO in the concentration range of 1.3–13 mg L−1 was carried out by both the developed DPV method and a smartphone application. LOD and LOQ values were found to be 0.4 mg L−1 and 1.25 mg L−1 for the developed DPV method and 0.26 mg L−1 and 0.82 mg L−1 for the smartphone implementations, respectively. By taking advantage of the restricted solubility of some other nitro-explosives in water, the solvent medium and the pH of the supporting electrolyte (the pH value at which NTO exists in anionic form, not valid for other explosives) were optimized. In the presence of other nitro explosives, such as trinitrotoluene (TNT), 1,3,5-trinitro-1,3,5-triazacyclohexane (RDX), 2,4-dinitro toluene (DNT), and 1,3,5,7-tetranitro-1,3,5,7-tetraazacyclooctane (HMX), the percentage recovery values range from 90.1 to 105.2 % according to the DPV results measured in admixtures with NTO. Surface morphologies of the modified electrode were characterized using scanning electron microscopy (SEM), and Fourier-transform infrared spectroscopy (FTIR), whereas electrochemical studies were performed using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The detection method proposed was not adversely affected by common soil ions as well as detergents, sugar, sweeteners, caffeine, and paracetamol-based painkillers as camouflage materials for explosives, the negative impacts of which were either nonexistent or eliminable.

Fluorescence Sensing Properties of a Bibranched Cyanostilbene Derivative Containing -NH2 for Trace Water and Picric Acid Determination.

In order to design organic small molecule fluorescent materials with multiple sensing, a bibranched -NH2 modified cyanostilbene derivative (AM) was synthesized. It exhibits solvent and aggregation-induced emission effects, with a solid-state quantum yield of 28%, which is seven times higher than that in THF. The synthesized sample AM demonstrated high sensitivity to trace water via a fluorescence "turn-off" response, achieving a low detection limit of 0.41 µM in THF and 0.80 µM in EtOH. AM also exhibits a "turn-off" response to picric acid, attributed to the photo-induced electron transfer effect it induces. The recognition of picric acid by AM demonstrates specificity and resistance to interference from nitro explosives, with a detection limit of 300 ppb and a linear relationship (R2 = 0.9981) at the range of 0-4 equivalents AM. Such acid recognition can facilitate the design of qualitative test papers and safety inks. Additionally, AM can function as a temperature sensor with a linear relationship (R2 = 0.9976) within the temperature range of 25-110°C. Leveraging these unique characteristics, a series of methods were proposed for the direct quantitative determination of trace water in nonaqueous solvents, picric acid, and temperature.

Efficient nanostructured Cs2CuBr2Cl2 perovskite as a fluorescent sensor for the selective “Switch Off” detection of nitrobenzene

Lead halide nanostructured perovskites are well known for their excellent photoluminescence and optoelectronic properties. However, lead toxicity and instability in moisture impedes its suitability for material use. Here we synthesized a highly efficient, lead free, economical, stable Cs2CuBr2Cl2 perovskite nanocrystals (PNCs) via Ligand Assisted Re-Precipitation (LARP) method which is less explored. The sensing application of the synthesized PNCs towards nitro explosives and other small organic compounds were studied. The probe exhibited high selectivity towards nitrobenzene with a lowest detection limit of 57.64 nM. The fluorescent emission intensity was drastically quenched upon the addition of 32 µM nitrobenzene. A Stern-Volmer plot was utilized for the quantification of fluorescence quenching. Further to investigate the quenching mechanism, time correlated single photon counting spectroscopy and other photoluminescence studies were performed pointing out the possibility of fluorescence resonance energy transfer. The work has been further extended to test the capability of the probe to detect nitrobenzene in real water samples and a good recovery percentage ranging from 93-98 % was obtained. Further, a paper strip assay was designed which successfully detected nitrobenzene and can be clearly noticed even with our naked eye making the probe an excellent sensor for nitrobenzene detection.

Hazardous 2,4,6-Trinitrophenol (TNP) Detection in Water by Amine and Azine Functionalized Metal-Organic Framework.

A Zn(II)-based metal-organic framework (MOF) decorated with amine and azine functionalities, TMU-17-NH2 (formulated as [Zn(H2ata)(L)].2DMF; L = 1,4-bis(4-pyridyl)-2,3-diaza-2,3-butadiene and H2ata = 2-aminoterephthalic acid) has been successfully synthesized via a solvothermal method. According to crystallographic studies, the synthesized TMU-17-NH2 has three dimensional cuboidal structure with the pore surface decorated with free amine (-NH2) and azine (= N-N =) functional groups. The photoluminescence investigations proved that the synthesized MOF can be effectively utilized for selective detection of 2,4,6-trinitrophenol (TNP) in water with an apparent turn-off quenching response. Its limits of detection (LOD) for TNP was 9.4ppb and competitive nitro explosive testing confirmed its higher selectivity towards TNP (over other nitro explosives). Calculations based on density functional theory (DFT) and spectrum overlap were utilized to evaluate the sensing mechanisms. This MOF-based fluorescence sensing technique for TNP had a high sensitivity (Ksv = 3.26 × 104M-1).

An amphiphilic dansyl based multianalyte sensor for the detection of Hg2+, PPi, and TNP: A three-in-one chemical sensor

A fluorescent dansyl-based amphiphilic probe, 5-(dimethylamino)-N-hexadecylnaphthalene-1-sulfonamide (DLC), was synthesized and characterized to detect multiple analytes at different sensing environments. In acetonitrile, DLC detects nitro explosives such as trinitrophenol (TNP) and 2,4-dinitrophenol (2,4-DNP) by an emission “on-off” response method, and the detection limits (LOD) were estimated to be as low as 4.3 µM and 17.4 µM, respectively. Amphiphilic long chains of the probe were embedded into lipid bilayers to form nanoscale vesicles DLC.Ves. Nanovesicular probe DLC.Ves was found to be highly selective for Hg2+ among other metal ions and for pyrophosphate (PPi) ions among various anions. DLC.Ves could detect Hg2+ with a turn “on–off” emission and PPi with ratiometric change in emission at 525 nm. It is proposed that DLC.Ves could detect Hg2+ via the Hg2+-induced aggregation quenching mechanism and PPi through the Hydrogen bonding. The LODs are estimated as 6.41 µM and 70.9 µM for Hg2+ and PPi, respectively. 1H NMR, SEM, and fluorescence lifetime measurements confirmed the binding mechanism. Thus, it is believed that the simple fluorescent probe DLC could be a prominent sensor to detect multiple analytes depending on the sensing medium.

A Type of Conjugated Fuse Heterocyclic Schiff Base Colorimetric andFluorescent Chemosensors for Selective Detection of Picric acid (PA)

: A series of Schiff base chemosensors (M1, M2 and M3) were designed and synthesized based on conjugated fuse heterocyclic aldehyde thiosemicarbazone. Optical properties of fluorescent probes M1, M2, and M3 toward various nitro explosives 2,4-dinitrotoluene (DNT), o-nitrophenol (ONP), p-nitrophenol (PNP), phenol (PhOH) and nitromethane (NM) were investigated, M1, M2, and M3 could selectively recognize PA with an obvious color change and fluorescence quenching, even in the presence of other coexistence nitro explosives. The detection limit of M1, M2, and M3 were 1.18and#215;10-7 M, 1.13and#215;10-7 M, 1.09and#215;10-7 M, respectively.

Single-component rare-earth-free white light-emitting metal–organic framework towards nitroaromatic explosive sensing and dye adsorption

Cd-PNMI, a white-light-emitting MOF, demonstrates ratiometric fluorescence quenching of nitro explosives and toxic substances, and possesses the capability to rapidly and selectively adsorb Rhodamine B and fluorescein dyes from waste liquids.

Label-Free Detection of Unbound Bilirubin and Nitrophenol Explosives in Water by a Mechanosynthesized Dual Functional Zinc Complex: Recognition of Picric Acid in Various Common Organic Media.

High levels of unconjugated bilirubin (UB) in serum lead to asymptomatic and neonatal jaundice and brain dysfunctions. Herein, we have reported the detection of UB at as low as 1 μM in an aqueous alkaline medium using a Zn(II) complex. The specificity of the complex has been validated by the HPLC in the concentration window 6-90 μM, which is rare. The sensory response of the probe at physiological pH against nitro explosives developed it as an instant-acting fluorosensor for picric acid (PA) and 2,4-dinitrophenol (2,4-DNP). Spectroscopic titration provided a binding constant of 4×105 M-1 with PA. The naked eye detection was found to be 15 μM. The solid-state photoluminescent nature of the complex enabled it for PA sensing in the solid phase. Interestingly, the probe remained fluorescent in various volatile and non-volatile organic solvents. As a result, it can also detect PA and 2,4-DNP in a wide range of common organic media. NMR studies revealed the coordination of PA, 2,4-DNP, and UB to the Zn(II) center of the probe, which is responsible for the observed quenching of the probe with the analytes.

Metal-Organic Framework Based on Pyrazinoquinoxaline Tetracarboxylic Acid for Fluorescence Sensing for Nitro Explosives.

The rapid and selective detection of nitro explosives has become one of the current urgent environmental and safety issues. Fluorescent metal-organic frameworks (MOFs) provide strong support for the development of photoactive materials with excellent sensing performances. In this work, Zn2+ and pyrazinoquinoxaline tetracarboxylic acid with high nitrogen content were selected to construct a MOF structure termed Zn-MOF, which had excellent optical properties. The fluorescence sensing performance of Zn-MOF for nitro explosives was also investigated. The structural advantages of Zn-MOF, such as its porous structure, abundant host-guest interaction sites, and stable framework, ensure the prerequisites for various applications. Zn-MOF is not only capable of responding to a wide range of substrates, such as Fe3+, Cr2O72-, and MnO4-, to achieve fluorescence quenching detection but also able to achieve sensitive fluorescence sensing behavior for nitro explosives. In particular, for trinitrotoluene, the Ksv value can reach 8.72 × 103 M-1. The results show that the introduction of pyrazinoquinoxaline groups into MOFs can be an effective strategy for the preparation of highly efficient fluorescent sensing materials for nitro explosives.

Synthesis and Fluorescence Sensing for Nitro Explosives and Pesticides of Two Cd-Coordination Polymers.

Two cadmium coordination polymers (CPs), {[Cd(zgt)(2,2'-bipy)(H2O)]·H2O}n (1) and {[Cd(zgt)(BPP)(H2O)]·H2O}n (2) (H2zgt = 5-methoxyresorcinic acid, 2,2'-bipy = 2,2'-bipyridine, and BPP = 1,3-bis(4-pyridyl)propane), were prepared by the hydrothermal method. The structures of CPs 1-2 were characterized by IR, TGA, X-ray powder diffraction, and elemental analysis. The single-crystal structure analysis shows that CP 1 is a typical 1D chain structure and CP 2 belongs to a 2D layered structure. Based on the excellent luminescence properties of CP 1 and 2, fluorescence sensing experiments were carried out for explosives and pesticides. The results of the explosion sensing experiment showed that CP 1 and 2 had an excellent fluorescence quenching effect on PNBA (p-nitrobenzoic acid) and TNP (2,4,6-trinitrophenol), respectively, and the detection limits were 3.28 and 11.4 nM, respectively. Interestingly, both CP 1 and 2 showed good fluorescence quenching against the pesticide fluridine (Flu), and CP 1 had a lower detection limit and was more sensitive. In addition, the fluorescence quenching mechanism was discussed in detail by the UV absorption spectrum and density functional theory. In order to explore its practical application, the content of Flu in water samples was detected by a labeling recovery method.

An AIE active imidazole conjugated α-cyanostilbene based sensor for the selective and sensitive detection of picric acid in an aqueous medium

Due to increasing pollution threats, terrorism-sensitive rapid sensing of aromatic nitro explosives (picric acid) has gained predominant significance in environmental safety. Herein, imidazole-derived monofunctional fluorescent sensor 2-(4-aminophenyl)-3-(3-(4,5-diphenyl-1H-imidazol-2-yl)-2-hydroxyphenyl) acrylonitrile (ADHA) was successfully developed for the selective recognition of explosive picric acid. The D-π-A configuration of ADHA facilitates extraordinary photophysical properties with remarkable aggregation-induced emission (AIE). The detection process is induced by the photon-induced electron transfer (PET) and resonance energy transfer (RET) and results in the generation of ADHA+PA complex. The structural relationship and the photophysical properties of ADHA were extensively studied by DFT (Density Functional Theory) methods and spectroscopic analysis. It has been calculated that the detection limit of the formed complex is 6.26 nM. In addition, 1H NMR titrations DFT calculations, and HRMS analysis were performed to understand the detection mechanism better. Test strip-aided detection and invisible ink applications confirmed that ADHA is a versatile sensor for sensitively detecting picric acid without sophisticated instruments. In addition, ADHA was implemented to detect PA in real water samples with remarkable recovery.

A luminescent Eu-based MOFs material for the sensitive detection of nitro explosives and development of fingerprint

A luminescent Eu-based MOFs material for the sensitive detection of nitro explosives and development of fingerprint

Mononuclear Zn(II) Complex Based on N2O Ligand Compartment: First Case to Detect Nitro Explosives.

This paper scrutinises the development of low-cost hypersensitive fluorescent probes manipulated chemically with Schiff base complexes and their prospective applicability for the detection of nitro explosives in light of the rapidly expanding demand for anti-trafficking measures. In this study, a new Zn(II) metal complex has beensynthesized in one pot using the Schiff base ligand L= 2-methoxy-5-methyl-N-(2-pyridin-2-ylmethylene) aniline. The complex was also thoroughly characterised using various spectroscopic tools and subjected to single crystal XRD analysis. In the asymmetric unit, square pyramidal zinc (II) centre exist in the inner N2O compartment of the ligand L. The intermolecular Cg···Cg interactions exist between two different asymmetric residual units lead to supramolecular assembly along b axis. By turning off the fluorescence response, the complex serves as a sensor for the detection of nitro aromatics in CH3CN solution. A significant quenching efficiency has been reported with a quenching constant (KSV) 1.8 × 104 M-1 for 4-nitrobenzoic acid during investigation of sensing phenomenon in solution phase. In addition, determining the binding stoichiometry of the chemosensor with NO2 and the binding constant, the mechanism of fluorescence quenching has also been postulated. The detection limit of NO2 is 7.6×10 -7 M, with the binding constant k = 1.1021× 108 M-1. Additionally, the DFT calculation makes it easier to comprehend the appropriate binding process in light of the findings of experiments. We also designed a paper sensor strip for the visual detection of Nitro Explosive Residues in light of the sensor's potential used in forensic investigations.

Polymers and Polymer-Based Materials for the Detection of (Nitro-)explosives.

Methods for the remote detection of warfare agents and explosives have been in high demand in recent times. Among the several detection methods, fluorescence methods appear to be more convenient due to their low cost, simple operation, fast response time, and naked-eye-visible sensory response. For fluorescence methods, a large variety of fluorescent materials, such as small-molecule-based fluorophores, aggregation-induced emission fluorophores/materials, and supramolecular systems, have been reported in the literature. Among them, fluorescent (bio)polymers/(bio)polymer-based materials have gained wide attention due to their excellent mechanical properties and sensory performance, their ability to recognize explosives via different sensing mechanisms and their combinations, and, finally, the so-called amplification of the sensory response. This review provides the most up-to-date data on the utilization of polymers and polymer-based materials for the detection of nitroaromatic compounds (NACs)/nitro-explosives (NEs) in the last decade. The literature data have been arranged depending on the polymer type and/or sensory mechanism.