Ni Concentrations Research Articles

Microstructure and mechanical properties of cast, eutectic Al-Ce-Ni-Mn-Sc-Zr alloys with multiple strengthening mechanisms

The effects of Ni additions on microstructure and microhardness of near-eutectic Al-9Ce-xNi-0.75Mn-0.18Sc-0.12Zr (x = 2.5, 3.2, and 3.9 wt.%) alloys are investigated for various cooling rates. The as-cast microstructure consists of fine, micron-scale Al11Ce3 and Ni-rich phases formed during eutectic solidification. Two Ni-rich phases are observed: (i) Al27Ce3Ni6 at higher Ni contents and slower solidification rates, and (ii) Al9(Ni,Mn,Fe)2 at lower Ni contents and faster solidification rates. While these Ni-containing alloys have higher microhardness than a Ni-free control alloy, varying the Ni concentration in the 2.5–3.9 wt.% range does not significantly affect the microhardness, indicative of competing strengthening and weakening effects from adding Ni. The alloy with intermediate Ni content (3.2 wt.%) is selected for further microstructural and mechanical characterization. It contains four coarsening-resistant strengthening constituents: (i) micron-scale Al11Ce3 and (ii) Al27Ce3Ni6 or Al9(Ni,Mn,Fe)2 platelets, all formed during eutectic solidification, (iii) L12-Al3(Sc,Zr) nanoprecipitates formed on aging, and (iv) Mn atoms in solid solution in the α-Al matrix. The combined strengthening mechanisms impart high strength at ambient and elevated temperatures, as measured by microhardness (as a function of aging time), by compression and tensile experiments, and by compressive creep measurements. Alloys previously reported in the literature - with various combinations of one, two or three of these four strengthening phases - show lower hardness and creep resistance, indicating that cumulative strengthening can be achieved when combining mechanisms; the present alloy containing all four phases shows a remarkably high creep threshold stress of 62 MPa at 300 °C.

Unveiling the potential of A. fabrum and γ-aminobutyric acid for mitigation of nickel toxicity in fenugreek

Nickel (Ni) is a heavy metal that adversely affects the growth of different crops by inducing oxidative stress and nutrient imbalance. The role of rhizobacteria (RB) is vital to resolve this issue. They can promote root growth and facilitate the uptake of water and nutrients, resulting in better crop growth. On the other hand, γ-aminobutyric acid (GABA) can maintain the osmotic balance and scavenge the reactive oxygen species under stress conditions. However, the combined effect of GABA and RB has not been thoroughly explored to alleviate Ni toxicity, especially in fenugreek plants. Therefore, in the current pot study, four treatments, i.e., control, A. fabrum (RB), 0.40 mM GABA, and 0.40 mM GABA + RB, were applied under 0Ni and 80 mg Ni/kg soil (80Ni) stress. Results showed that RB + 0.40 mM GABA caused significant improvements in shoot length (~ 13%), shoot fresh weight (~ 47%), shoot dry weight (~ 47%), root length (~ 13%), root fresh weight (~ 60%), and root dry weight (~ 15%) over control under 80 Ni toxicity. A significant enhancement in total chlorophyll (~ 14%), photosynthetic rate (~ 17%), stomatal CO2 concentration (~ 19%), leaves and roots N (~ 10 and ~ 37%), P (~ 18 and ~ 7%) and K (~ 11 and ~ 30%) concentrations, while a decrease in Ni (~ 83 and ~ 49%) concentration also confirmed the effectiveness of RB + 0.40 mM GABA than control under 80Ni. In conclusion, fabrum + 0.40 mM GABA can potentially alleviate the Ni toxicity in fenugreek plants. The implications of these findings extend to agricultural practices, environmental remediation efforts, nutritional security, and ecological impact. Further research is recommended to elucidate the underlying mechanisms, assess long-term effects, and determine the practical feasibility of using A. fabrum + 0.40GABA to improve growth in different crops under Ni toxicity.

Spatial health risk assessments of nickel in the groundwater sources of a mining-impacted area

Mining activities have increased the potential risks of metal pollution to the groundwater resources in arid areas across the globe. Therefore, this study aimed to examine the health risk associated with nickel (Ni) in the groundwater sources of a mining-impacted area, South Khorasan, Eastern Iran. A total of 110 stations were included in the study, comprising 62 wells, 40 qanats, and 8 springs in summer, 2020. Initially, the collected samples were tested for temperature, pH, and electrical conductivity (EC). Subsequently, the samples were filtered and treated with nitric acid (HNO3) to measure the concentration of Ni using Inductively Coupled Plasma Mass Spectrometry (ICP-MS). Hazard quotient (HQ) and non-carcinogenic risk assessments were employed to evaluate the potential risks of Ni to the inhabitants. The findings revealed that the concentration of Ni ranged from 0.02 to 132.39 μg l−1, and only two stations exhibited Ni concentrations above the WHO standards (20 μg l−1). The results demonstrated that 98.21% of the sampled locations had HQ values below one, indicating negligible risk, while 1.78% of the stations exhibited HQ values of one or higher, representing a high non-carcinogenic risk for water consumers. Overall, the concentration of nickel in the groundwater of South Khorasan exceeded the World Health Organization (WHO) limit solely in the Halvan station, posing a non-carcinogenic risk for the residents in that area, and therefore, additional efforts should be made to provide healthier groundwater to consumers in this region.

Can vermicomposting be used to process hyperaccumulator biomass in nickel agromining?

AbstractHyperaccumulator plants are a botanical curiosity that have allowed the development of agromining of metals, with a special focus on nickel. In nickel agromining, this element is recovered from ashed hyperaccumulators cultivated on metal‐rich soils. In order to explore bio‐based approaches for the decomposition of hyperaccumulator biomass and nickel recovery that do not include burning, we performed a vermicomposting experiment using the earthworm species Eisenia andrei and the biomass of Bornmuellera emarginata (which contained almost 1% of nickel). We conducted our experiment for 12 weeks and assessed the decomposition process of the hyperaccumulator biomass, changes in earthworm number and biomass, and changes in nickel concentration and mobility. Despite the initial mortality and an increase of Ni concentration in earthworm tissues, E. andrei was able to decompose B. emarginata biomass. This process also showed a massive colonization of the biomass by a fungus during the first weeks of the assay. Our results indicate that the vermicomposted hyperaccumulator biomass had a higher nickel concentration than the starting material but the diethylenetriaminepentaacetic acid‐extractable nickel decreased. At the same time, due to earthworm activity, the nickel was redistributed and diluted in the vermicompost bedding, reducing the interest of this approach for agromining, but opening the perspective of using the vermicomposted hyperaccumulator biomass as an organic amendment in nickel‐deficient crops.

Investigation of heavy metals uptake in root-shoot of native plant species adjoining wastewater channels.

Metal pollution in water, soil, and vegetation is an emerging environmental issue. Therefore, this study investigated the abundance of heavy metals (HMs) within roots and shoots of native plant species i.e., Bromus pectinatus, Cynodon dactylon, Poa annua, Euphorbia heliscopa, Anagallis arvensis, and Stellaria media grown in the adjoining area of municipal wastewater channels of a Pakistani city of Abbottabad. HMs concentrations (mg L-1) in municipal wastewater were: chromium (Cr) (0.55) > nickel (Ni) (0.09) > lead (Pb) (0.07) > cadmium (Cd) (0.03). Accumulation of HMs in both roots and shoots of plant species varied as B. pectinatus > C. dactylon > P. annua > E. heliscopa > A. arvensis > S. media. Irrespective of the plant species, roots exhibited higher concentrations of HMs than shoots. Higher amount of Cr (131.70 mg kg-1) was detected in the roots of B. pectinatus and the lowest amount (81 mg kg-1) in A. arvensis, Highest Cd concentration was found in the shoot of B. pectinatus and the lowest in the E. heliscopa. The highest concentration of Ni was found in the roots of S. media (37.40 mg kg-1) and the shoot of C. dactylon (15.70 mg kg-1) whereas the lowest Ni concentration was achieved in the roots of A. arvensis (12.10 mg kg-1) and the shoot of E. heliscopa (5.90 mg kg-1). The concentration of HMs in individual plant species was less than 1000 mg kg-1. Considering the higher values (> 1) of biological concentration factor (BCF), biological accumulation co-efficient (BAC), and translocation factor (TF), B. pectinatus and S. media species showed greater potential for HMs accumulation than other species. Therefore, these plants might be helpful for the remediation of HM-contaminated soil.

Pistia Stratiotes based heavy metals phytoremediation of a Himalayan river impacted by hydroelectric plant in an Indo Burma hotspot region

ABSTRACT Present study attempts to study the impact of Serlui-B hydroelectric dam on water quality (‘water-energy nexus’) of a Himalayan river and to devise possible phytotechnology for heavy metals remediation. Physico-chemical characteristics of water were analyzed using ‘American Public Health Association (APHA)’ methods while Atomic Absorption Spectrophotometer (AAS) was used for estimation of heavy metals. To this end, concentrations of Fe and Ni were recorded above permissible limit which can impose public health risks. Therefore, phytoremediation experiments were performed by using Pistia stratiotes L. (water lettuce) and effects of Fe and Ni concentrations (1.0, 2.0, and 5.0 mg/L) on photosynthetic pigments were observed. Phytoremediation investigations using 24 aquaria (of 40.5 L) revealed that P. stratiotes was an effective hyperaccumulator of Fe and Ni with maximum removal efficiency of 96.2% and 92%, respectively. In relation to bioaccumulation indices, the bioconcentration factor (BCF) values decreased with increase in Fe and Ni concentrations, whereas the translocation factor (TF) was noted higher at low concentrations and vice versa. Furthermore, the total chlorophyll content and carotenoid levels in P. stratiotes demonstrated negative significant correlation with the rise in Fe/Ni concentrations that may be considered as an adaptive biochemical strategy to mitigate metals induced oxidative stress. The present study can further be extrapolated to field phytoremediation for ameliorating both physico-chemical and metallic contaminants. Last, the role of microbial biodiversity associated with P. stratiotes should be elucidated in future to help achieve SDG 6 and environmental sustainability.

The use of a portable X-ray fluorescence spectrometer for measuring nickel in plants: sample preparation and validation.

X-ray fluorescence is a fast, cost-effective, and eco-friendly method for elemental analyses. Portable X-ray fluorescence spectrometers (pXRF) have proven instrumental in detecting metals across diverse matrices, including plants. However, sample preparation and measurement procedures need to be standardized for each instrument. This study examined sample preparation methods and predictive capabilities for nickel (Ni) concentrations in various plants using pXRF, employing empirical calibration based on inductively coupled plasma optical emission spectroscopy (ICP-OES) Ni data. The evaluation involved 300 plant samples of 14 species with variable of Ni accumulation. Various dwell times (30, 60, 90, 120, 300s) and sample masses (0.5, 1.0, 1.5, 2.0g) were tested. Calibration models were developed through empirical and correction factor approaches. The results showed that the use of 1.0g of sample (0.14gcm-2) and a dwell time of 60s for the study conditions were appropriate for detection by pXRF. Ni concentrations determined by ICP-OES were highly correlated (R2 = 0.94) with those measured by the pXRF instrument. Therefore, pXRF can provide reliable detection of Ni in plant samples, avoiding the digestion of samples and reducing the decision-making time in environmental management.

The competition of heavy metals between hyporheic sediments and microplastics of driving factors in the Beiluo River Basin

Both sediments and microplastics (MPs) are medias of heavy metals (HMs) in river ecosystems. This study investigated HMs (Mn, Cr, V, As, Cu, Co, Cd, Pb, and Ni) concentration and driving factors for competitive enrichment between hyporheic sediments versus MPs. The medias basic characteristics indicated that the sediments were mostly sand and rich in Fe2O3; three polymer types were identified, with blue, fragment, less than 500 µm being the main types of MPs. The results have shown that the average content of extracted HMs in MPs was much higher than that of the same metals accumulated in sediments. HMs in sediments and MPs reached heavily polluted at some points, among which As and Cd were ecological risks. Electrostatic adsorption and surface complexation, and biofilm-mediated and organic matter complexation were the interaction mechanism of HMs with sediments and MPs. Further, the driving factors affecting the distribution of HMs in the two carriers were analyzed by multivariate statistical analysis. The results demonstrated that carrier characteristics, hydrochemical factors, and the inherent metal load of MPs were the main causes of the high HMs content. These findings improved our understanding of HMs fate and environmental risks across multiple medias.

Assessment of health risks from potassium bromate and trace metals in bread consumption in Ado Ekiti, Southwest, Nigeria

IntroductionBread, a staple food consumed by a large portion of the population worldwide, including Nigeria, has emerged as one of the most popular quick meal options. The excessive intake of potassium bromate and trace metals in bread has been identified as detrimental to human health due to its heightened propensity to induce cancer in human. ObjectiveThe current study assessed the exposure to potassium bromate (KBrO3) and trace metals through bread consumption, as well as the associated risks to dietary habits among Ado Ekiti, Southwest Nigeria residents. Bread varieties commonly consumed in Ado Ekiti were randomly chosen from local bakeries. These bread samples were then analyzed in the laboratory using an Atomic Absorption Spectrophotometer to determine the levels of trace metals, including lead (Pb), manganese (Mn), nickel (Ni), chromium (Cr), zinc (Zn), cadmium (Cd), and cobalt (Co), as well as potassium bromate concentrations. ResultsThe findings revealed that cobalt (Co) had the highest mean concentration (29.35±3.59 mg.kg−1), whereas lead (Pb) exhibited the lowest mean concentration (0.06±0.02 mg.kg−1). The sequence of trace metal levels was Co > Cd > Zn > Ni > Mn > Cr > Pb. All trace metal concentrations exceeded the standards set by FAO/WHO. Regarding potassium bromate content, it ranged from 0.01 mg.kg−1 to 0.06 mg.kg−1, surpassing the maximum permissible limits of 0.02 mg.kg−1 set by the Food and Drug Administration.Although the chronic hazard quotient among adults and children was low, the hazard ratio ranged from 11 to 9 among adults and from 14 to 9 among children, suggesting the potential for carcinogenic effects with repeated consumption. Based on the hazard ratios, the estimated chances of developing cancer from daily consumption of bread samples were approximately 14 in 1,000,000, 86 in 1,000,000, 71 in 1,000,000, and 40 in 1,000,000, respectively, for the adult population, and about 20 in 1,000,000, 11 in 1,000,000, 90 in 1,000,000, and 56 in 1,000,000 for the children population. ConclusionThe study showed that trace metals Pb, Mn, Ni, Cr, Zn, Cd and Co concentrations were higher than the FAO/WHO permissible limits. The concentration of potassium bromate in all the sorted bread samples exceeded the maximum acceptable limits except one. Though chronic hazard quotient among adults and children was low, the hazard ratio among the adult and children population was high, signifying possible cancer risks when continually consumed. These findings underscore the importance of stringent oversight by Nigerian regulatory authorities over using potassium bromate as an ingredient in bakeries.

Microstructures and complex impedance analysis of spray pyrolysis-synthesized Ni doped ZnO for optoelectronic applications

This study focuses on the physical exploration, particularly examining the structural and electrical attributes of ZnO thin films produced through spray deposition, with variations in the Ni/Zn ratio (0.25 %, 0.5 %, and 0.75 %). X-ray diffraction (XRD) analysis reveals that both undoped and Ni-doped ZnO films exhibit a hexagonal crystalline structure, with a preferred orientation along the (002) direction perpendicular to the substrate. The semiconductor nature of all prepared compounds is confirmed by the grain boundary resistance. An escalation in Ni concentration corresponds to an increase in grain boundary resistance. The activation energy values, derived from both relaxation time and grain boundary resistances, closely align. Impedance studies indicate the presence of two relaxation processes within the compounds. The Nyquist diagram illustrates the emergence of semicircles, with decreasing radii at higher temperatures, indicating thermally activated semiconductor behavior in these samples, as evidenced by electrical conductance and distribution of relaxation times.

Health Risk Assessment of Heavy Metals in Soils of a City in Guangdong Province Based on Source Oriented and Monte Carlo Models

Taking a city in Guangdong Province as the research area, the concentration and spatial distribution characteristics of heavy metals in the surface soil were studied to clarify the situation of soil heavy metal pollution and priority control factors, providing basic data for the prevention and control of soil heavy metal pollution in the city. The content characteristics of heavy metals in 221 soil samples in the city were analyzed, and the potential health risk assessment and source analysis were carried out through the Monte Carlo model, the potential health risk assessment (HRA) model, and the PMF receptor model. It was found that heavy metals ω(As), ω(Hg), ω(Cd), ω(Pb), ω(Cr), ω(Cu), ω(Ni), and ω(Zn) in the soil of the city were 18.16, 0.43, 1.46, 68.57, 98.34, 64.19, 26.53, and 257.32 mg·kg-1, respectively, with a moderate to high degree of variation. Except for Ni concentration, the soil concentrations of other heavy metal elements exceeded the background values of soil in Guangdong Province to a certain extent, and the concentrations of Cd and Zn exceeded the national secondary standards, resulting in severe heavy metal pollution; the main sources of heavy metals were industrial sources, and natural parent materials, lead battery manufacturing, transportation, artificial cultivation, and pesticide and fertilizer inputs also had an undeniable impact on the accumulation of heavy metals in the soil. Heavy metals in the soil had a certain degree of tolerable carcinogenic health risk for both children and adults, whereas non-carcinogenic risks could be ignored. The potential health risk of children was greater than that of adults, and the main exposure route was through oral intake. The input sources of pesticides and fertilizers and As should be the main controlling factors for the health risks of heavy metals in the city's soil, followed by mixed sources and Cr. There were differences in the spatial distribution characteristics and relative pollution levels of heavy metals, and it is necessary to deepen zoning monitoring and control, strengthen soil pollution prevention and control, and reduce human input of heavy metals in soil.

Transcriptome Analysis Revealed the Possible Reasons for the Change of Ni Resistance in Rhus typhina after Spraying Melatonin.

Melatonin (MT) plays an important role in alleviating the stress of soil heavy metal pollution on plants. However, its ability to improve the tolerance of Rhus typhina to Ni stress and its mechanism of action are still unclear. Therefore, MT (0, 50, 100, and 200 μmol·L-1) was sprayed on the leaf surface of R. typhina seedlings under Ni (0 and 250 mg·kg-1) stress to study the differences in growth, physiology, and gene expression. The results showed that exogenous MT could improve the ability of R. typhina to resist Ni stress by inhibiting the degradation of chlorophyll and carotenoid, enhancing photosynthesis, and augmenting the activity of antioxidant enzymes. Moreover, 100 μmol·L-1 MT could increase the Ni concentration in R. typhina seedlings and reduce the translocation factor. Transcriptome analysis showed that MT mainly regulated the expression of related genes in plant hormone signal transduction, starch and sucrose metabolism, and various amino acid metabolism pathways. This study combined physiological and transcriptomic analysis to reveal the molecular mechanism of MT enhancing Ni resistance in R. typhina, and provides a new direction for expanding its application in phytoremediation.

Modified diatomite for soil remediation and its implications for heavy metal absorption in Calendula officinalis

BackgroundAmong different adsorbents, natural and inorganic compounds such as diatomite are important and advantageous in terms of high efficiency and cost-effectiveness, and function in stabilizing heavy metals in the environment. Calendula officinalis, a plant known as a high accumulator of heavy metals, was cultivated in soil treated with varying concentrations of modified diatomite to demonstrate the efficiency of modified diatomite in stabilizating of heavy metals in soils,ResultsThe modification of diatomite aimed to enhance Calendula officinalis adsorptive properties, particularly towards heavy metals such as lead (Pb), Zinc (Zn), Chromium (Cr), Nickle (Ni), and Copper (Cu), common contaminants in industrial soils. The experimental design included both control and treated soil samples, with assessments at regular intervals. Modified diatomite significantly decreased the bioaccumulation of heavy metals in contaminated soils except Zn, evidenced by decreased DTPA extractable heavy metals in soil and also heavy metal concentrations in plant tissues. Using 10% modified diatomite decreased 91% Pb and Cu, 78% Cr, and 79% Ni concentration of plants compared to the control treatment. The highest concentration of Zn in plant tissue was observed in 2.5% modified diatomite treatment. Remarkably, the application of modified diatomite also appeared to improve the nutrient profile of the soil, leading to enhanced uptake of key nutrients like phosphorus (P) 1.18%, and potassium (K) 79.6% in shoots and 82.3% in roots in Calendula officinalis. Consequently, treated plants exhibited improved growth characteristics, including shoots and roots height of 16.98% and 12.8% respectively, and shoots fresh and dry weight of 48.5% and 50.2% respectively., compared to those in untreated, contaminated soil.ConclusionThe findings suggest promising implications for using such amendments in ecological restoration and sustainable agriculture, particularly in areas impacted by industrial pollution.

Frustration-induced quantum criticality in Ni-doped CePdAl as revealed by the µSR technique

In CePdAl, the 4f moments of cerium arrange to form a geometrically frustrated kagome lattice. Due to frustration, in addition to Kondo and Ruderman-Kittel-Kasuya-Yosida interactions, this metallic system shows a long-range magnetic order (LRO) with a TN of only 2.7 K. Upon Ni doping at the Pd sites, TN is further suppressed, to reach zero at a critical concentration xc≈0.15. Here, by using muon-spin relaxation and rotation (µSR), we investigate CePd1−xNixAl at a local level for five different Ni concentrations, both above and below xc. Like the parent CePdAl compound, for x=0.05, we observe an incommensurate LRO, which turns into a quasistatic magnetic order for x=0.1 and 0.14. More interestingly, away from xc, for x=0.16 and 0.18, we still observe a non-Fermi-liquid (NFL) regime, evidenced by a power-law divergence of the longitudinal relaxation at low temperatures. In this case, longitudinal field measurements exhibit a time-field scaling, indicative of cooperative spin dynamics that persists for x>xc. Furthermore, like the externally applied pressure, the chemical pressure induced by Ni doping suppresses the region below T*, characterized by a spin-liquid-like dynamical behavior. Our results suggest that the magnetic properties of CePdAl are similarly affected by the hydrostatic and the chemical pressure. We also confirm that the unusual NFL regime (compared with conventional quantum critical systems) is due to the presence of frustration that persists up to the highest Ni concentrations. Published by the American Physical Society 2024

Biogeochemical Fluxes of Nickel in the Global Oceans Inferred From a Diagnostic Model

AbstractNickel (Ni) is a micronutrient that plays a role in nitrogen uptake and fixation in the modern ocean and may have affected rates of methanogenesis on geological timescales. Here, we present the results of a diagnostic model of global ocean Ni fluxes which addresses key questions about marine Ni cycling. Sparsely available observations of Ni concentration are first extrapolated into a global gridded climatology using tracers with better observational coverage such as macronutrients, and testing three different machine learning techniques. The physical transport of Ni is then estimated using the ocean circulation inverse model (OCIM2), revealing regions of net convergence or divergence. These diagnostics are not based on any assumption about Ni biogeochemical cycling, but their spatial patterns can be used to infer where biogeochemical processes such as biological Ni uptake and regeneration take place. Although Ni and silicate (Si) have similar concentration patterns in the ocean, we find that the spatial pattern of Ni uptake in the surface ocean is similar to phosphate (P) uptake but not to silicate (Si) uptake. This suggests that their similar distributions arise from different biogeochemical mechanisms, consistent with other evidence showing that Ni is not incorporated into diatom frustules. We find that Ni:P ratios at uptake do not decrease as Ni concentrations approach 2 nM, which challenges the hypothesis of a ∼2 nM pool of non‐bioavailable Ni in the surface ocean. Finally, we find that the net regeneration of Ni occurs deeper in the ocean than for P, though not as deeply as for Si.

Nanoprecipitate strengthened, alumina forming austenitic stainless steels for elevated temperature applications

Low cost stainless steels (SS) with high performance, especially with good mechanical properties and oxidation resistance at high temperature, are continuous pursuit for manufacture industry. To achieve good combination of mechanical properties, oxidation resistance and cost, nanoprecipitate strengthened alumina forming austenitic (NSAFA) SS have been developed by removing expensive elements such as Nb and Ta, lowering Ni concentration in Fe–26Ni–15Cr-1.5Mo-(2.8–3.5)Al-(1–2.35)Ti (wt.%) alloys. Microstructure investigation demonstrates that NSAFA SS are strengthened by L12 structured (Ni, Fe)3(Al, Ti) γ′ nanoprecipitates with area fraction around 25%–40%. Oxidation experiments (750 °C/480 h) in air demonstrates that all the NSAFA steels have alumina forming ability. In addition, it is found that Al and Ti are all necessary for γ′ nanoprecipitates, but additional Al and Ti facilitate formation of the Ni2AlTi phase. To ensure high volume fraction of γ′ nanoprecipitates and reduce Ni2AlTi phase, 2.8–3.0 wt% Al and 1.8–2.35 wt% Ti are preferred. Benefit from the high volume fraction of γ′ nanoprecipitates, yield strength of NSAFA steels is much higher than that of Fe-base superalloy (e.g., A286) and can compare to some Ni-base superalloys (e.g., Hayners 282 & Inconel 740H).

The dissolution of olivine added to soil at 32°C: the fate of weathering products and its implications for enhanced weathering at different temperatures

The amendment of agricultural soils by crushed silicate minerals has been proposed to enhance weathering rates and facilitate carbon dioxide (CO2) removal from the atmosphere. Laboratory dissolution experiments typically provide weathering rates that are significantly higher than those observed under natural conditions, while field studies are limited in the nature of data they can collect. This study uses an experimental setup that aims to emulate natural field conditions in a controlled setting using soil cores retrieved from UK cropland amended with crushed olivine at 32°C. Results are compared to enhanced weathering experiments run at 4°C and 19°C under otherwise identical conditions. The data reveal temperature-dependent variations in the behaviour of different elements, most importantly Mg and Si, with silicon being retained at moderate temperatures and magnesium being retained at higher temperatures. These patterns are most likely due to different retention mechanisms, notably Si reprecipitation (e.g. as cation-depleted Si-enriched mineral surface coatings) and cation exchange (affecting Mg, but to a lesser degree Si), such that the influence of cation exchange should be accounted for when interpreting enhanced weathering field data. We therefore recommend that estimates of carbon sequestration should not be based on the behaviour of individual elements. A temperature effect on the weathering rate of olivine added to soil columns is observed with the weathering rate being higher at 32°C than at 19°C and 4°C, and significantly lower than laboratory experiment-derived weathering rates. This further emphasises the need for enhanced weathering field trials, as simple laboratory-derived rates cannot be used to assess the feasibility of enhanced weathering measures. The carbon dioxide capture potential at 32°C is conservatively estimated at ~115 t CO2 km-2 yr-1 assuming an olivine amendment rate of 12.7 kg m-2. Our data suggests that soil accumulation of heavy metals like Cu and Cr at high temperatures (hence high weathering rates) is non-dangerous, however, Ni concentrations in the effluent solution are close to EU guidelines while Cr and Cu are considerably lower than guidelines. All of these conclusions have implications for the application of enhanced weathering for carbon dioxide removal from the atmosphere.

Assisting nickel agromining using sustainable amendments

AbstractOne of the challenges of agromining is the adoption of more environmentally‐friendly solutions to improve plant biomass yields and Ni concentrations in plants. Here, we focused on four sustainable solutions for optimizing nickel phytoextraction by the hyperaccumulator Odontarrhena chalcidica: a biostimulant, another biostimulant/plant defense stimulator, artificial root exudates, and a biodegradable metal chelator. Their effects on the growth and physiology of O. chalcidica, on Ni phytoextraction capacity, on physicochemical soil characteristics, and on the diversity of rhizosphere and endophytic bacteria were compared to a conventional mineral fertilizer. A 5‐month pot experiment was carried out with O. chalcidica growing on an ultramafic soil. Element concentrations in both soil and plant were measured. Moreover, numerous compounds were analyzed (photosynthetic pigments, malondialdehyde, flavonoids, free amino acids, and starch). We also characterized rhizosphere and endophytic bacterial communities associated with this hyperaccumulator. Biostimulants appeared to be a promising way of improving Ni concentration in shoots and plant biomass production, and showed a positive effect on bacterial richness and diversity. In contrast, our experiments did not show that artificial exudates and mineral fertilizer had a positive effect on Ni phytoextraction. Finally, the biodegradable chelator had no significant effect. The use of sustainable amendments into a Ni agromining system improved both plant biomass and Ni yields, in comparison to mineral fertilization. Thus, improving agromining by replacing mineral fertilizers would be an eco‐efficient strategy.

Neoproterozoic (ca. 830 Ma) carbonatite dykes from Qianlishan in the western North China Craton: Petrogenesis and metallogenic implications

Carbonatite and the associated alkaline intrusive complexes are the primary sources of light rare earth element (REEs). Our field investigations in the western margin of the North China Craton (NCC) have firstly identified over 20 carbonatite dykes and minor coeval carbonate-rich lamprophyre dykes intruding the Paleoproterozoic Qianlishan Group in the southern Qianlishan area. Zircon LA-ICP-MS U-Pb dating on six carbonatite samples yielded crystallization ages ranging from 835.2 ± 3.7 Ma to 828.9 ± 3.8 Ma, indicating emplacement of the carbonatite dykes at ca. 830 Ma during the Neoproterozoic. Geochemical data show that most of the carbonatite dykes are rich in light REEs with total light REEs > 600 ppm to 4932 ppm, and the carbonate-rich lamprophyre dykes are characterized by high Cr (1219–1267 ppm) and Ni concentrations (857–1076 ppm). Petrological and scanning electron microprobe (SEM) analytical results show that the dominant REE-bearing minerals in the carbonatites are monazite, and other REE-bearing minerals are parisite and bastnäsite. Geochemical and carbon–oxygen isotopic results indicate that the ca. 830 Ma carbonatite dykes were produced by low-degree partial melting of a previously metasomatised subcontinental lithospheric mantle with assimilation of crustal material. Emplacement of the ca. 830 Ma carbonatite and carbonate-rich lamprophyre dykes in the southern Qianlishan area and the previously reported ca. 810 Ma mafic dykes in the middle Qianlishan area occurred in a continental rift environment. Simultaneous development of the Neoproterozoic (830 − 810 Ma) continental rifting events in the western margin of the NCC and the eastern margin of the Alxa Block as previously suggested may indicate a connection between the eastern Alxa Block and the western NCC during and before the middle Neoproterozoic.

Ecological risk assessment of oil & grease (OG) and heavy metals in the surface water of Naf River, Bangladesh

This study aims to fill the gap in our understanding of the distribution and ecological risk of oil and grease (OG) and toxic heavy metals in the surface water of the Naf River, a major transportation route connecting Teknaf to Saint Martin's Island in Bangladesh. Altogether, 6 sampling stations in this river were assessed for OG and heavy metal pollution, revealing the presence of both at each station. The OG concentration is found ranging from 3.6 to 23.6 mg/L and the average concentration is 8.13 mg/L. On the other hand, the contamination factor (Cf) of the toxic heavy metals follows the descending order of Pb (63.97) > Cd (23.94) > Mn (0.94) > Ni (0.64) > Zn (0.22) > Cr (0.09) > Cu (0.04) > As (0.04) in the water samples. Heavy metal pollution index (HPI), Heavy metal evaluation index (HEI), and Nemerow pollution index (PN) indicate that the surface water of the study area includes high levels of pollution category due to the elevated levels of Pb, Cd, and Ni concentrations. The mean values of the single factor pollution index (Pi) for Pi(Pb), Pi(Cd) and Pi(Ni) are found 45.69, 39.41, and 6.43, which exceed the threshold limit. The ecological risk index indicates that around 25 % of the total heavy metals show a very high ecological risk and 75 % exhibit a lower ecological risk. Notably, within the very high ecological risk, Cd is responsible for 53 % of this risk, while Pb contributes the remaining 47 %. Increased OG and heavy metal concentrations in the Naf River are likely due to human activities like waste discharge from municipalities, solar power plants, pesticide use, and fishing trawlers. This research offers insights into the current state of the Naf River and guides policymakers toward more effective initiatives.