Network Performance Research Articles

Resilience and Robustness Analysis of Enterprise Network with Edge Sensors

The robustness and resilience of enterprise networks are critical in ensuring consistent performance, even in the face of unexpected disruptions. This study addresses the significant challenges faced in maintaining network stability by introducing edge sensors using Raspberry Pi 4, Prometheus, and Grafana. The primary objective is to assess the impact of edge sensors on enhancing the robustness and resilience of campus wireless networks, with a particular focus on Universitas Islam Indonesia. The system effectively monitors critical metrics such as packet loss and ping in real-time, enabling early detection and alerts for declining network performance. The findings highlight that this approach significantly improves network stability, providing a cost-effective and scalable solution for continual network management. Furthermore, the study recommends the integration of machine learning algorithms to enhance anomaly detection accuracy.

Review of QoS-aware resource allocation schemes for 5g networks

Resource management in wireless networks refers to the processes and techniques used to allocate, control, and optimize the various resources in a wireless communication system to ensure efficient and reliable operation. These resources typically include spectrum (frequency bands), power, time slots, and network infrastructure (e.g., base stations, access points). Effective resource management is crucial for maximizing network performance, ensuring Quality of Service (QoS), and providing a good user experience, especially in environments with limited resources and high demand. Quality of Service (QoS) refers to the ability of the network to provide different levels of service quality to various types of traffic, applications, and users. QoS in 5G is essential due to the diverse range of services the network is designed to support, each with its own specific requirements for performance metrics such as latency, reliability, bandwidth, and availability. In this paper, we study how the QoS-aware resource allocation procedure is handled in wireless networks. Different resource management techniques were studied and also the paper looked at some of the existing QoS-aware resources allocation schemes by highlighting the operation, strength and weakness and the QoS parameters considered by each of the schemes.

DFRDRL: a dynamic fuzzy routing algorithm based on deep reinforcement learning with guaranteed latency and bandwidth for software-defined networks

Traditional routing algorithms have several limitations that become increasingly significant in the context of Software-Defined Networking (SDN). Firstly, these algorithms often have limited support for Quality of Service (QoS) requirements, making them less suitable for handling diverse traffic types efficiently. Moreover, current SDN controllers leverage a default shortest-path routing approach, which does not allow for more dynamic and flexible traffic management based on real-time network policies. To address these issues, this paper introduces a Dynamic Fuzzy Routing algorithm based on Deep Reinforcement Learning (DRL) for SDN that provides guaranteed latency and bandwidth (DFRDRL). DFRDRL provides intelligent and efficient routing that adapts to dynamic traffic by considering path-state criteria and using DRL. Fuzzy logic mainly performs online routing between an ingress-egress pair. To adapt to dynamic traffic changes, DFRDRL can predict the traffic matrix in real time. Meanwhile, DFRDRL reduces the routing reliance on network topology by weighting the network based on critical nodes. Additionally, when the network experiences congestion based on the traffic matrix, a deferral mechanism is applied to prioritize requests with lower resource demands. This mechanism helps ensure efficient resource allocation by temporarily postponing or queuing higher-demand requests, thereby optimizing overall network performance during periods of congestion. The simulation results show that the performance of DFRDRL is better than the equivalent algorithms in terms of latency and throughput. Also, DFRDRL is about 2.5% more efficient than the best existing algorithm in terms of admission rate of routing requests.

Enhancing the performance of a resonance-based sensor network for soft robots using binary excitation.

Embedded, flexible, multi-sensor sensing networks have shown the potential to provide soft robots with reliable feedback while navigating unstructured environments. Time delay associated with extracting information from these sensing networks and the complexity of constructing them are significant obstacles to their development. This paper presents a novel enhancement to an existing class of embedded sensor network with the potential to overcome these challenges. In its original version, this sensor network extracts information from multiple reactive sensors on a two-wire electrical circuit simultaneously. This paper proposes to change the excitation signal applied to this sensor network to a binary signal. This change offers two key advantages: it provides the ability to employ small, inexpensive microcontrollers and results in a faster data extraction process. The potential of this enhanced system is demonstrated here with a proof of concept implementation. The self-inductance of all inductance-based sensors within this proof of concept sensor network can be measured at a rate of over 5000 times per second with an average measurement error of less than 2%.

Interpreting pretext tasks for active learning: a reinforcement learning approach

As the amount of labeled data increases, the performance of deep neural networks tends to improve. However, annotating a large volume of data can be expensive. Active learning addresses this challenge by selectively annotating unlabeled data. There have been recent attempts to incorporate self-supervised learning into active learning, but there are issues in utilizing the results of self-supervised learning, i.e., it is uncertain how these should be interpreted in the context of active learning. To address this issue, we propose a multi-armed bandit approach to handle the information provided by self-supervised learning in active learning. Furthermore, we devise a data sampling process so that reinforcement learning can be effectively performed. We evaluate the proposed method on various image classification benchmarks, including CIFAR-10, CIFAR-100, Caltech-101, SVHN, and ImageNet, where the proposed method significantly improves previous approaches.

Rethinking max-min planning on energy-efficient software-defined networking for 5G networks.

Energy efficiency plays an important role in intelligent networking for 5G networks, which concerns environmental, financial, and performance aspects of intelligent networking for 5G networks. To this end, network designers propose energy-efficient approaches to reduce energy consumption of networks and to raise network performance by switching off the links/nodes with low loads or at idle status. The existing energy-efficient approaches can be formulated as a max-min optimal problem, namely maximizing network/node/port throughput via minimum energy consumption. The max-min planning investigates energy efficiency only from the links/nodes perspective. The max-min planning for energy-efficient networking, if not carefully designed from the network-wide standpoint, can lead to lower energy efficiency for the whole network due to lack of global planning, which in turn results in the degraded performance due to network un-connectivity after closing the nodes/links. In this paper we rethink the max-min planning framework on energy-efficient software-defined networking for intelligent networking of 5G networks, which takes in account combining network connectivity and maximum network flow with minimum energy consumption. Our framework aims at how to deliver dynamic end-to-end traffic demands with the appropriate network topology by building data forwarding plane with maximum network flow and control plane with network connectivity. We discuss the associated challenges and implementation issues. A dynamic max-min planning framework depending on dynamic end-to-end traffic demands is presented to achieve network-wide energy efficiency. Numerical results show the improved energy efficiency performance for the whole network.

Maximizing energy efficiency in HetNets through centralized and distributed sleep strategies under QoS constraint

This research addresses the critical need to optimize the Energy Efficiency (EE) for Ultra-Dense HetNets amid the ever-increasing demands for high-speed data networks. The rapid increase in high-speed devices highlights the urgent necessity for a transformative change in upcoming 5G cellular networks. According to Ericsson's 2022 report, mobile data traffic volume is expected to double by 2027, with mobile video traffic anticipated to rise by nearly 30% each year. In response to these challenges, researchers have identified essential technologies that facilitate 5G networks, including massive Multiple-input-Multiple-output (m-MIMO) systems and HetNets. Although both promise enhanced coverage and throughput, HetNets emerges as a cost-effective solution, surpassing m-MIMO in implementation cost and coverage. However, achieving maximum EE in HetNets necessitates careful consideration of various constraints, including delay, coverage probability, and Signal-to-Interference-plus-Noise Ratio (SINR) thresholds. This research marks a significant milestone in adopting the Distributed Dynamic Opportunistic Sleep Strategy (D-DOSS) approach. The D-DOSS method organizes small clusters throughout the network and evaluates key Quality of Service (QoS) parameters including Energy Utilization Efficiency (EUE), Coverage Probability, Data Throughput, and Success Probability using Monte Carlo simulations. This research analyzes Distributed Sleep (DS) and Centralized Schemes (CS) concerning given QoS parameters. While DS methodologies often exhibit performance trade-offs compared to CS, they provide significant advantages in terms of ease of implementation and management. CS, though representing the most commonly used method in ultra-dense HetNets involves high computational costs that complicate its management. By integrating the D-DOSS and addressing various constraints, this research not only advances HetNet technologies but also makes a significant contribution to optimizing EE while preserving network performance and QoS. The innovative D-DOSS approach offers a promising solution to the challenges of energy efficiency in wireless communication networks and paves the way for future advancements in HetNet deployments. The results and analysis show that D-DOSS effectively addresses the limitations of DS and outperforms existing CS techniques.

Evaluating the performance of water distribution network deterioration using customer-oriented performance indices

ABSTRACT Water distribution networks (WDNs) are an essential urban infrastructure, with their performance directly influencing societal well-being. Our study applied to a real network model that employs a 24-h simulation with 1-h time steps and evaluates the impact of leaks and loss in the pipe cross-sectional area on WDN hydraulic performance as experienced by end users. Adhering to a UK utility's 20-m head pressure requirement as the water main benchmark, we present two new customer-oriented performance indices (CPIs) centred on network reliability and pressure deficit severity. The new CPIs adeptly quantify network performance degradation due to pipe deterioration. This degradation translates directly to a poor customer experience, highlighting the potential for these CPIs to pinpoint areas of the network where performance levels are compromised. Furthermore, the CPIs identify individual pipes within the network where defects would severely impact network performance and the sets of pipes which, when simultaneously experiencing defects, would lead to a more severe loss in network performance. Results show that the CPIs capture relatively small performance declines and identify sensitive pipes impacting network performance, providing insights for optimised inspection and maintenance intervention to provide better customer service.

Cross-Layer Routing Protocol Based on Channel Quality for Underwater Acoustic Communication Networks

Due to the physical characteristics of acoustic channels, the performance of underwater acoustic communication networks (UACNs) is more susceptible to the impacts of multipath and Doppler effects. Channel quality can serve as a measure of the reliability of underwater communication links. A cross-layer routing protocol based on channel quality (CLCQ) is proposed to improve the overall network performance and resource utilization. First, the BELLHOP ray model is used to calculate the channel impulse response combined with the winter sound speed profile data of a specific sea area. Then, the channel impulse response is integrated into the communication system to evaluate the channel quality between nodes based on the bit error rate (BER). Finally, during the selection of the next hop node, a reinforcement learning algorithm is employed to facilitate cross-layer interaction within the protocol stack. The optimal relay node is determined by the channel quality index (BER) from the physical layer, the buffer state from the data link layer, and the node residual energy. To enhance the algorithm’s convergence speed, a forwarding candidate set selection method is proposed which takes into account node depth, residual energy, and buffer state. Simulation results show that the packet delivery rate (PDR) of the CLCQ is significantly higher than that of Q-Learning-Based Energy-Efficient and Lifetime-Extended Adaptive Routing (QELAR) and Geographic and Opportunistic Routing (GEDAR).

SLICK: Strong Lensing Identification of Candidates Kindred in gravitational wave data

ABSTRACT By the end of the next decade, we hope to have detected strongly lensed gravitational waves by galaxies or clusters. Although there exist optimal methods for identifying lensed signal, it is shown that machine learning (ML) algorithms can give comparable performance but are orders of magnitude faster than non-ML methods. We present the SLICK pipeline which comprises a parallel network based on deep learning. We analyse the Q-transform maps (QT maps) and the Sine-Gaussian projection (SGP) maps generated for the binary black hole signals injected in Gaussian as well as real noise. We compare our network performance with the previous work and find that the efficiency of our model is higher by a factor of 5 at a false positive rate of 0.001. Further, we show that including SGP maps with QT maps data result in a better performance than analysing QT maps alone. When combined with sky localization constraints, we hope to get unprecedented accuracy in the predictions than previously possible. We also evaluate our model on the real events detected by the LIGO–Virgo collaboration and find that, at a threshold of 0.75 our network correctly classifies all of them, consistent with non-detection of lensing.

Heart sound classification algorithm based on bispectral feature extraction and convolutional neural networks

Cardiovascular disease (CVD) is one of the leading causes of death worldwide. Heart sound classification plays a key role in the early detection of CVD. The difference between normal and abnormal heart sounds is not obvious. In this paper, in order to improve the accuracy of the heart sound classification model, we propose a heart sound feature extraction method based on bispectral analysis and combine it with convolutional neural network (CNN) to classify heart sounds. The model can effectively suppress Gaussian noise by using bispectral analysis and can effectively extract the features of heart sound signals without relying on the accurate segmentation of heart sound signals. At the same time, the model combines with the strong classification performance of convolutional neural network and finally achieves the accurate classification of heart sound. According to the experimental results, the proposed algorithm achieves 0.910, 0.884 and 0.940 in terms of accuracy, sensitivity and specificity under the same data and experimental conditions, respectively. Compared with other heart sound classification algorithms, the proposed algorithm shows a significant improvement and strong robustness and generalization ability, so it is expected to be applied to the auxiliary detection of congenital heart disease.

Incorporating policy mixes to multimodal network capacity considering second-best constraints

In the pursuit of capacity-oriented urban sustainable development (SD), this study aims to enhance the multimodal transport network by making it more accessible, efficient, and environmentally friendly. A sustainable framework combining policy mixes and second-best constraints is developed as a multimodal transportation network capacity (TNC) model with the bi-level programming (BLP) formulation. The upper-level model is to maximise the total origin-destination (OD) demand with considering second-best constraints. The lower-level model is a combined mode split and traffic assignment with elastic demand (CMSTA-ED) model which considers policy mixes. Numerical experiments are conducted to demonstrate the effectiveness of the hybrid PSO–GWO algorithm, the synergy of the method for selecting and mixing policy instruments based on the proposed assessment system, and a methodology to establish a policy mix. The findings of this research offer practical guidance for formulating well-informed and no-redundant policy mixes, contributing to the improvement of sustainable multimodal transportation network performance.

Construction and Application of a Private 5G Standalone Medical Network in a Smart Health Environment: Exploratory Practice From China.

To date, the differentiated requirements for network performance in various health care service scenarios-within, outside, and between hospitals-remain a key challenge that restricts the development and implementation of digital medical services. This study aims to construct and implement a private 5G (the 5th generation mobile communication technology) standalone (SA) medical network in a smart health environment to meet the diverse needs of various medical services. Based on an analysis of network differentiation requirements in medical applications, the system architecture and functional positioning of the proposed private 5G SA medical network are designed and implemented. The system architecture includes the development of exclusive and preferential channels for medical use, as well as an ordinary user channel. A 3-layer network function architecture is designed, encompassing resource, control, and intelligent operation layers to facilitate management arrangements and provide network open services. Core technologies, including edge cloud collaboration; service awareness; and slicing of access, bearer, and core networks, are employed in the construction and application of the 5G SA network. The construction of the private 5G SA medical network primarily involves system architecture, standards, and security measures. The system, featuring exclusive, preferential, and common channels, supports a variety of medical applications. Relevant standards are adhered to in order to ensure the interaction and sharing of medical service information. Security is achieved through mechanisms such as authentication, abnormal behavior analysis, and dynamic access control. Three typical medical applications that rely on the 5G network in intrahospital, interhospital, and out-of-hospital scenarios-namely, mobile ward rounds, remote first aid, and remote ultrasound-were conducted. Testing of the 5G-enabled mobile ward rounds showed an average download rate of 790 Mbps and an average upload rate of 91 Mbps. Compared with 4G, the 5G network more effectively meets the diverse requirements of various business applications in prehospital emergency scenarios. For remote ultrasound, the average downlink rate of the 5G network is 4.82 Mbps, and the average uplink rate is 2 Mbps, with an average fluctuation of approximately 8 ms. The bandwidth, performance, and delay of the 5G SA network were also examined and confirmed to be effective. The proposed 5G SA medical network demonstrates strong performance in typical medical applications. Its construction and application could lead to the development of new medical service models and provide valuable references for the further advancement and implementation of 5G networks in other industries, both in China and globally.

Optimizing relay node selection in cooperative wireless body area networks with modified POA

In the realm of Wireless Body Area Networks (WBANs), cooperative communications emerge as a crucial research focus, lauded for their capacity to mitigate fading and optimize spectral efficiency. Choosing the appropriate relay in cooperative communication is vital for ensuring spatial diversity, as incorrect relay selections can lower the network's overall performance. This study utilizes an optimization method referred to as M-POA(Modified Pelican Optimization Algorithm) to tackle the relay selection problem. This paper introduces a M-POA specifically designed for cooperative networks in Wireless Body Area Networks (WBAN). The core concept behind the M-POA is to mimic the hunting behavior of pelicans in nature. Here, the relay selection is determined using the M-POA, with channel gain as a fitness function. The proposed strategy integrates the Decode-and-Forward (DF) relay protocol to significantly enhance communication efficiency and reliability. The proposed method is assessed in comparison with other relay selection techniques through a Bit Error Rate (BER) analysis, evaluating the effectiveness of each approach across different Signal-to-Noise Ratio (SNR) scenarios. The simulation results analysis elucidates that M-POA provides well-balanced performance in both exploration and exploitation aspects. By calculating the Bit Error Rate (BER), we assessed the effectiveness of the optimized relay selection strategy, with the objective of minimizing BER to enhance overall communication reliability. By studying the convergence curve, we evaluated the relay selection technique's performance and gauged how effectively it improved with each iteration. The proposed scheme effectively addresses both key requirements of WBAN: improving communication system reliability and optimizing relay selection.

Reservoir structure optimization of echo state networks: A detrended multiple cross-correlation pruning perspective

Reservoir structure optimization of echo state networks (ESN) is an important enabler for improving network performance. In this regard, pruning provides an effective means to optimize reservoir structure by removing redundant components in the network. Existing studies achieve reservoir pruning by removing insignificant neuronal connections. However, such processing causes the optimized neurons to still remain in the reservoir and thus hinder network inference by participating in computations, leading to suboptimal utilization of pruning benefits by the network. To solve this problem, this paper proposes an adaptive pruning algorithm for ESN within the detrended multiple cross-correlation (DMC2) framework, i.e., DMAP. On the whole, it contains two main functional parts: DMC2 measure of reservoir neurons and reservoir pruning. Specifically, the former is used to quantify the correlation among neurons. Based on this, the latter can remove neurons with high correlation from the reservoir completely, and finally obtain the optimal network structure by retraining the output weights. Experiment results show that DMAP-ESN outperforms its competitors in nonlinear approximation capability and reservoir stability.

A prototype early warning system for diarrhoeal disease to combat health threats of climate change in the asia-pacific region

Abstract Ongoing climate variability and change are increasing the burden of diarrhoeal disease worldwide. Meaningful early warning systems with adequate lead times (weeks to months) are needed to guide public health decision–making and enhance community resilience against health threats posed by climate change. Toward this goal, we trained various machine-learning models to predict diarrhoeal disease rates in Nepal (2002–2014), Taiwan (2008–2019), and Vietnam (2000–2015) using temperature, precipitation, previous disease rates, and El Niño Southern Oscillation phases. We also compared the performance of shallow time-series neural network (NN), Random Forest Regressor, artificial nn, gradient boosting regressor, and long short-term memory–based methods for their effectiveness in predicting diarrhoeal disease burden across multiple countries. We evaluated model performance using a test dataset and assessed the accuracy of predicted diarrhoeal disease incidence rates for the last year of available data in each district. Our results suggest that even in the absence of the most recent disease surveillance data, a likely scenario in most low- and middle-income countries, our NN-based early warning system using historical data performs reasonably well. However, future studies are needed to perform prospective evaluations of such early warning systems in real-world settings.

Deep Learning‐Driven Modeling of Dynamic Acoustic Sensing in Biomimetic Soft‐Robotic Pinnae

ABSTRACTBiological function often depends on complex mechanisms of a dynamic, time‐variant nature. An example is certain bat species (horseshoe bats—Rhinolophidae) that use intricate pinna musculatures to execute a variety of pinna deformations. While prior work has indicated the potential significance of these motions for sensory information encoding, it remains unclear how the complex time‐variant pinna geometries could be controlled to enhance sensory performance. To address this issue, this work has investigated deep neural network models as digital twins for biomimetic pinnae. The networks were trained to predict the acoustic impacts of the deformed pinna geometries. A total of three network architectures have been evaluated for this purpose using physical numerical simulations (boundary element method) as ground truth. The networks predicted the acoustic beampattern function from pinna shape or even directly from the states of actuators that were used to deform the pinna shapes in simulation. Inserting prior knowledge in the form of beam‐shaped basis functions did not improve network performance. The ability of the networks to produce beampattern predictions with low computational effort (in about three milliseconds each) should lend itself readily to supporting learning methods such as deep reinforcement learning that require many such functional evaluations.

Dynamic clustering based risk aware congestion control technique for vehicular network

In order to improve road safety and offer extra services to cars and their users, vehicular ad hoc networks, or VANETs, are essential parts of intelligent transportation systems (ITS). The primary aim of this research is to suggest and assess a new approach for mitigating network congestion in VANET technology through the implementation of dynamic grouping of vehicles for safety (DGVS). To do this, virtual regions are created around cars using the DBSCAN and K Mean method. This allows vehicles to communicate directly with others within the same DGVS, eliminating the need to broadcast messages across the entire network.The ultimate goal is to drastically decrease traffic while preserving vital data transfer for VANET traffic control and safety. The suggested technique determines the optimal transmission rate in accordance with the existing channel circumstances, yielding a balanced performance concerning both packet delivery and channel congestion. With this novel method, cars may only talk to other vehicles that are in the same DGVS, thus there’s no need to broadcast messages to the whole network. With the use of this technique, the efficacy of DGVS in reducing VANET congestion and enhancing network performance will be thoroughly assessed. The study’s conclusions demonstrate how well the suggested dynamic grouping of vehicles for safety (DGVS) technique works to reduce VANET congestion. It was shown through simulation-based studies that, in comparison to current approaches, DGVS dramatically decrease network congestion, resulting in notable gains in network performance and decreased communication delay. Additionally, the study found a number of possible uses for DGVS in the transportation industry, such as emergency response, traffic management, and accident prevention.

Ferrimagnet-Based Neuromorphic Device Mimicking the Ventral Visual Pathway for High-Accuracy Target Recognition.

The ventral visual pathway (VVP) of the human brain efficiently implements target recognition by employing a deep hierarchical structure to build complex visual concepts from simple features. Artificial neural networks (ANNs) based on spintronic devices are capable of target recognition, but their poor interpretability and limited network depth hinder ANNs from mimicking the VVP. Hardware implementation of the VVP requires a biorealistic spintronic device as well as the corresponding interpretable and deep network structure, which have not been reported so far. Here, we report a ferrimagnetic neuron with a continuously differentiable exponential linear unit (CeLu) activation function, which is closer to biological neurons and could mitigate the issue of limited network depth. Meanwhile, we also demonstrate that a ferrimagnet can construct artificial synapses with high linearity and symmetry to meet the requirements of weight update algorithms. Based on these neurons and synapses, we propose an all-spin convolutional neural network (CNN) with a high interpretability and deep neural network, to mimic the VVP. Compared to the state-of-the-art spintronic-based neuromorphic computing model, the CNN with bionic function, using experimentally derived device parameters, achieves high recognition accuracies of over 91% and 98% on the CIFAR-10 datasets and the MNIST datasets, respectively, showing improvements of 1.13% and 1.76%. Our work provides a promising method to improve the bionic performance of spintronic device-based neural networks.

Optimizing neural network models for predicting nuclear reactor channel temperature: A study on hyperparameter tuning and performance analysis

This study emphasizes how important accurate prediction of channel temperatures in nuclear reactors is for safety and operational efficiency. While traditional methods require long and complex processes such as kernel modeling and mathematical simulations, artificial neural networks (ANN) provide more efficient predictions by accelerating this process. The superior ability of ANNs to process large data sets is intended to demonstrate that this study will provide a valuable alternative compared to conventional methods and increase the accuracy of reactor temperature predictions. In this study, the training performances of Artificial Neural Network (ANN) developed to determine the nuclear reactor channel temperature with different hyperparameter combinations were analysed. It was conducted several experimental studies to assess the influence of hyperparameters on our model for nuclear reactor parameter data prediction. The training and validation results indicates that learning rate, hidden layer sizes and number have critical effects for the more precisive prediction. It was observed that models with a learning rate of 0.05 and 0.5 achieved successful learning with less fluctuation in training and validation errors. When looking at hidden layer sizes, networks with 32 and 64 neurons performed better than networks with 16 neurons. For the test phase our model can successfully predict data with slight error margin. As a result, we demonstrated that neural networks are a powerful tool in nuclear reactor channel temperature prediction through our proposed model.