Nervous System Tissue Engineering Research Articles

Production of a Bioink Containing Decellularized Spinal Cord Tissue for 3D Bioprinting.

For the past few years, three-dimensional (3D) bioprinting has emerged as a promising approach in the field of regenerative medicine. This technique allows for the production of 3D scaffolds to support cell transplantation due to its ability to mimic the extracellular environment. One alternative to enhancing cell adhesion, survival, and proliferation is the use of decellularized extracellular matrix as a bioink component. The aim of this study was to produce a bioink using lyophilized rat decellularized spinal cord tissue (DSCT) for 3D bioprinting of nervous tissue. DNA quantification, hematoxylin and eosin and DAPI staining indicated that 1% sodium dodecyl sulfate and 9 h processing were effective in removing the cells from the spinal cord samples. The cell viability assay showed that the decellularized matrix is not cytotoxic for PC12 cells. The hydrogel containing DSCT, alginate, and gelatine used as the base for the bioink has a shear thinning behavior and low G″/G' ratio, allowing for good printability without compromising cell viability after 3D bioprinting. The bioink supported long-term PC12 cell survival, with 93% of live cells 4 weeks after printing, and stimulated the production of laminin-1 and neurofilament-M. This bioink, therefore, represents an easily available biomaterial for central nervous system tissue engineering.

Chitosan-g-oligo(L,L-lactide) Copolymer Hydrogel Potential for Neural Stem Cell Differentiation.

We evaluated the applicability of chitosan-g-oligo(L,L-lactide) copolymer (CLC) hydrogel for central nervous system tissue engineering. The biomechanical properties of the CLC hydrogel were characterized and its biocompatibility was assessed with neural progenitor cells obtained from two different sources: H9-derived neural stem cells (H9D-NSCs) and directly reprogrammed neural precursor cells (drNPCs). Our study found that the optically transparent CLC hydrogel possessed biomechanical characteristics suitable for culturing human neural stem/precursor cells and was noncytotoxic. When seeded on films prepared from CLC copolymer hydrogel, both H9D-NSC and drNPC adhered well, expanded and exhibited signs of spontaneous differentiation. While H9D-NSC mainly preserved multipotency as shown by a high proportion of Nestin+ and Sox2+ cells and a comparatively lower expression of the neuronal markers βIII-tubulin and MAP2, drNPCs, obtained by direct reprogramming, differentiated more extensively along the neuronal lineage. Our study indicates that the CLC hydrogel may be considered as a substrate for tissue-engineered constructs, applicable for therapy of neurodegenerative diseases. Impact statement We synthetized a chitosan-g-oligo(L,L-lactide) hydrogel that sustained multipotency of embryonic-derived neural stem cells (NSCs) and supported differentiation of directly reprogrammed NSC predominantly along the neuronal lineage. The hydrogel exhibited no cytotoxicity in vitro, both in extraction and contact cytotoxicity tests. When seeded on the hydrogel, both types of NSCs adhered well, expanded, and exhibited signs of spontaneous differentiation. The biomechanical properties of the hydrogel were similar to that of human spinal cord with incised pia mater. These data pave the way for further investigations of the hydrogel toward its applicability in central nervous system tissue engineering.

Advanced 4D-bioprinting technologies for brain tissue modeling and study

ABSTRACTAlthough the process by which the cortical tissues of the brain fold has been the subject of considerable study and debate over the past few decades, a single mechanistic description of the phenomenon has yet to be fully accepted. Rather, two competing explanations of cortical folding have arisen in recent years; known as the axonal tension and the differential tangential expansion models. In the present review, these two models are introduced by analyzing the computational, theoretical, materials-based, and cell studies which have yielded them. Then Four-dimensional bioprinting is presented as a powerful technology which can not only be used to test both models of cortical folding de novo, but can also be used to explore the reciprocal effects that folding associated mechanical stresses may have on neural development. Therein, the fabrication of ‘smart’ tissue models which can accurately simulate the in vivo folding process and recapitulate physiologically relevant stresses are introduced. We also provide a general description of both cortical neurobiology as well as the cellular basis of cortical folding. Our discussion also entails an overview of both 3D and 4D bioprinting technologies, as well as a brief commentary on recent advancements in printed central nervous system tissue engineering.

Injectable hyaluronan-methylcellulose composite hydrogel crosslinked by polyethylene glycol for central nervous system tissue engineering

Spontaneous recovery ability of central nerves has inspired researchers to focus on tissue engineering techniques, especially scaffolds. To obtain a material with an appropriate degrading rate, an injectable composite hydrogel HAMC consisting of hyaluronic acid and methylcellulose was prepared using polyethylene glycol as a cross linker in this study. HAMC combined the advantages of two components to be fast-gelling, injectable, degradable, biocompatible, and it was able to meet some special shape requirement for injured tissue by in-situ forming. Moreover, due to the crosslinking effects polyethylene glycol brought to methylcellulose, the rheological properties and stability of HAMC were greatly improved, which could prolong the residence time of this hydrogel effectively. Cell viability results showed HAMC was cytocompatible for further applications in vivo, and would be a promising choice for neural tissue engineering in the future.

Using Stem Cells to Grow Artificial Tissue for Peripheral Nerve Repair.

Peripheral nerve injury continues to pose a clinical hurdle despite its frequency and advances in treatment. Unlike the central nervous system, neurons of the peripheral nervous system have a greater ability to regenerate. However, due to a number of confounding factors, this is often both incomplete and inadequate. The lack of supportive Schwann cells or their inability to maintain a regenerative phenotype is a major factor. Advances in nervous system tissue engineering technology have led to efforts to build Schwann cell scaffolds to overcome this and enhance the regenerative capacity of neurons following injury. Stem cells that can differentiate along a neural lineage represent an essential resource and starting material for this process. In this review, we discuss the different stem cell types that are showing promise for nervous system tissue engineering in the context of peripheral nerve injury. We also discuss some of the biological, practical, ethical, and commercial considerations in using these different stem cells for future clinical application.

Effect of a nerve graft substitute single-walled carbon nanotubes on rat pheochromocytoma cells

Carbon nanotubes (CNTs) were extensively explored for their beneficial use in nervous system tissue engineering. However, an important concern regarding the use of CNTs is their toxicity during the interaction between cells and the nano particles. The rat pheochromocytoma cell line (PC12) was co-cultured with three types of single-walled carbon nanotubes (SWNTs), purified raw SWNTs (C), hydroxyl purified SWNTs (C-OH) and carboxyl purified SWNTs (C-COOH) at 25 µg/mL and 100 µg/ml. The experimental results revealed that SWNTs at the concentration below 100 µg/mL did not affect the cell viability. Notably, powerful antioxidant system in nerous system tissue is able to counteract with the toxicity of CNTs, which is characterized by the prominently enhanced expression of main antioxidant enzymes (catalase (CAT), superoxide dismutase (SOD), glutathione peroxidase (GPx) and glutathione-S-transferase (GST)). Therefore, we believe that CNTs can be good candidates for the fabrication of biomedical scaffolds for the nerve tissue repair.

Channeled polymeric scaffolds with polypeptide gel filling for lengthwise guidance of neural cells

CNS damages are often irreversible since neurons of the central nervous system are unable to regenerate after an injury. As a new strategy within the nervous system tissue engineering, multifunctional systems based on two different biomaterials to support axonal guidance in damaged connective tracts have been developed herein. These systems are composed of a channeled scaffold made of ethyl acrylate and hydroxyethyl acrylate copolymer, P(EA-co-HEA), with parallel tubular micropores, combined with an injectable and in situ gelable self-assembling polypeptide (RAD16-I) as pores filler. The polymer scaffold is intended to provide a three-dimensional context for axon growth; subsequently, its morphology and physicochemical parameters have been determined by scanning electron microscopy, density measurements and compression tests. Besides, the hydrogel acts as a cell-friendly nanoenvironment while it creates a gradient of bioactive molecules (nerve growth factor, NGF) along the scaffolds channels; the chemotactic effect of NGF has been evaluated by a quantitative ELISA assay. These multifunctional systems have shown ability to keep circulating NGF, as well as proper short-term in vitro biological response with glial cells and neural progenitors.

The role of the surface on microglia function: implications for central nervous system tissue engineering.

In tissue engineering, it is well accepted that a scaffold surface has a decisive impact on cell behaviour. Here we focused on microglia-the resident immune cells of the central nervous system (CNS)-and on their response to poly(trimethylene carbonate-co-ε-caprolactone) (P(TMC-CL)) fibrous and flat surfaces obtained by electrospinning and solvent cast, respectively. This study aims to provide cues for the design of instructive surfaces that can contribute to the challenging process of CNS regeneration. Cell morphology was evidently affected by the substrate, mirroring the surface main features. Cells cultured on flat substrates presented a round shape, while cells with elongated processes were observed on the electrospun fibres. A higher concentration of the pro-inflammatory cytokine tumour necrosis factor-α was detected in culture media from microglia on fibres. Still, astrogliosis is not exacerbated when astrocytes are cultured in the presence of microglia-conditioned media obtained from cultures in contact with either substrate. Furthermore, a significant percentage of microglia was found to participate in the process of myelin phagocytosis, with the formation of multinucleated giant cells being observed only on films. Altogether, the results presented suggest that microglia in contact with the tested substrates may contribute to the regeneration process, putting forward P(TMC-CL) substrates as supporting matrices for nerve regeneration.

Laminin Position as One of the Important Components of the Extracellular Matrix in Tissue Engineering of Nervous System

* Corresponding Authors: Zabihollah Khaksar, Hadi Aligholi E-mail: khaksar@sirazu.ac.ir, hadialigholi@yahoo.com

Accelerating Proliferation of Neural Stem/Progenitor Cells in Collagen Sponges Immobilized with Engineered Basic Fibroblast Growth Factor for Nervous System Tissue Engineering

Neural stem/progenitor cells (NS/PCs) play a therapeutic role in nervous system diseases and contribute to functional recovery. However, their efficacy is limited as the majority of cells die post-transplantation. In this study, collagen sponges were utilized as carriers for NS/PCs. Basic fibroblast growth factor (bFGF), a mitogen for NS/PCs, was incorporated into the collagen sponges to stimulate NS/PC proliferation. However, the effect of native bFGF is limited because it diffuses into the culture medium and is lost following medium exchange. To overcome this problem, a collagen-binding polypeptide domain, which has high affinity to collagen, was fused with bFGF to sustain the exposure of NS/PCs within the collagen sponges to bFGF. The results indicated that the number of NS/PCs was significantly higher in collagen sponges incorporating engineered bFGF than in those with native bFGF or the PBS control after 7 days in culture. Here, we designed a natural biological neural scaffold consisting of collagen sponges, engineered bFGF, and NS/PCs. In addition to the effect of proliferated NS/PCs, the engineered bFGF retained in the natural biological neural scaffolds could have a direct effect on nervous system reconstruction. The two aspects of the natural biological neural scaffolds may produce synergistic effects, and so they represent a promising candidate for nervous system repair.

Viscoelastic characterization of rat cerebral cortex and type I collagen scaffolds for central nervous system tissue engineering

In the field of tissue engineering and regenerative medicine for the central nervous system, therapeutic strategies may involve implantation of biomaterial scaffolds into the brain. An understanding of the relationship between the brain and the scaffold mechanical properties can help in the selection of a safe and effective biomaterial. This research demonstrates the use of indentation testing along with viscoelastic modeling to characterize and compare mechanical properties of in situ rat cerebral cortex and collagen scaffolds of varying collagen concentration. The stress–relaxation solution for indentation of a viscoelastic material was derived based on a five-element Maxwell model and use of the correspondence principle. Applying the model to experimental stress–relaxation data, the brain was characterized by three shear moduli G1=1.6±0.10 kPa, G2=2.0±0.15 kPa, G3=1.8±0.20 kPa, and two viscosities η2=11.0 ± 0.44 kPa⋅s, η3=148.7 ± 6.70 kPa⋅s, with corresponding relaxation time constants τ1=5.7±0.3 s and τ2=88.4 ± 7.6 s. The brain showed average relaxation of 74% from its peak force during loading to an approximately asymptotic force over a 5 minute hold at constant displacement. Collagen scaffolds generally showed increasing trends in the shear moduli, viscosities, and percentage relaxation with increasing collagen concentration. While the brain had similar stiffness to the 1.0% collagen scaffold during the loading phase, the brain’s relaxation behavior was distinct from all of the scaffolds. Similarities and differences between the mechanical behavior of the brain and collagen scaffolds of varying collagen concentration are discussed in relation to application of biomaterials for regenerative medicine.

Scaffolds for central nervous system tissue engineering

Traumatic injuries to the brain and spinal cord of the central nervous system (CNS) lead to severe and permanent neurological deficits and to date there is no universally accepted treatment. Owing to the profound impact, extensive studies have been carried out aiming at reducing inflammatory responses and overcoming the inhibitory environment in the CNS after injury so as to enhance regeneration. Artificial scaffolds may provide a suitable environment for axonal regeneration and functional recovery, and are of particular importance in cases in which the injury has resulted in a cavitary defect. In this review we discuss development of scaffolds for CNS tissue engineering, focusing on mechanism of CNS injuries, various biomaterials that have been used in studies, and current strategies for designing and fabricating scaffolds.

Central Nervous System Tissue Engineering: Current Considerations and Strategies

Combating neural degeneration from injury or disease is extremely difficult in the brain and spinal cord, i.e. central nervous system (CNS). Unlike the peripheral nerves, CNS neurons are bombarded by