Near-field Measurements Research Articles

Phaseless Probe-Corrected Spherical Near-Field Antenna Measurements Using Two Scan Spheres

Phaseless Probe-Corrected Spherical Near-Field Antenna Measurements Using Two Scan Spheres

Monostatic Free-Space Method for Relative Permittivity Determination Using Horn Antenna Near-Field Measurements

Monostatic Free-Space Method for Relative Permittivity Determination Using Horn Antenna Near-Field Measurements

Aeroacoustic characteristics of a strut-braced high-lift device

The aerodynamic and aeroacoustic performance of a strut-based high-lift device were evaluated and demonstrated for six different strut models. The primary objective of the study was to investigate the impact of strut modifications on reducing noise levels. The aerodynamic characteristics are presented with the aid of surface pressure distribution on the airfoil that remained consistent across all the tested configurations. The aeroacoustic results are presented as the near-field surface pressure fluctuations and far-field noise measurements to attain a profound comprehension of the noise generation mechanism. Although the Albatros strut exhibited the greatest reduction in tonal noise, the directivity pattern and the overall sound pressure level of the radiated noise demonstrated that the medium height strut configuration can achieve noise reduction of up to 8 dB. The near-field unsteady surface pressure measurements are suggestive of harmonic oscillations. The coherence studies carried out have shown a decrease in the tonal coherence for the small height strut configuration while the velocity field measurements performed in the wake of the high-lift device show no significant variation in flow patterns between different strut configurations.

An Efficient Procedure to Compensate for the Errors Due to the Probe Mispositioning in a Cylindrical Near-Field Facility.

This paper deals with the compensation of the probe mispositioning errors occurring in a cylindrical near-field (NF) facility due to the imprecise control of the linear and azimuthal positioners allowing the cylindrical scanning and/or to their limited resolution and to defects in the rails guiding the linear motion. As a result, 3-D errors in the positioning of the probe at any sampling point, as prescribed by the adopted non-redundant representation, affect the accuracy of the NF measurements. An efficient procedure is here proposed to properly compensate for these errors. It involves two steps. The former allows one to correct the mispositioning errors due to the deviation of each actual sampling point from the nominal measurement cylinder. The latter makes use of an iterative technique to restore the NF samples at any sampling point fixed by the used non-redundant representation from the ones obtained at the previous step and affected by 2-D mispositioning errors. Once these steps have been fruitfully applied, the so-compensated NF samples are effectively interpolated through a 2-D optimal sampling interpolation (OSI) formula to accurately reconstruct the input data required to perform the traditional cylindrical near-to-far-field transformation. The OSI representation is here developed by considering an elongated antenna under test as enclosed either in a prolate spheroid or in a cylinder terminated by two half spheres (rounded cylinder) in order to make the representation effectively non-redundant. Numerical test results, which thoroughly prove the efficacy of the devised procedure in correcting even severe 3-D mispositioning errors, are reported.

Broadband RCS reduction metasurface based on vortex singularities generated by Spin-to-Orbital angular momentum conversion

A broadband radar cross-section (RCS) reduction employed by the vortex metasurface is proposed. The underlying physics is associated with the Pancharatnam-Berry geometrical phases involved in spin-to-orbital angular momentum conversion. The proposed metasurface generates spin-controlled vortex waves with different topological charges. The vortex singularity implements specular extremely low RCS reduction. The prototypes are fabricated and measured to verify the wideband performance of the RCS reduction. The simulated results illustrate that −10 dB broadband RCS reduction from 9 GHz to 22.5 GHz and the RCS reduction has peak values −37.2 dB, −40.8 dB, and −42.5 dB at 9.8 GHz, 13.1 GHz, and 20.8 GHz, respectively. The measurement results illustrate that −10 dB RCS reduction over 9.1–18 GHz is realized, and the RCS reduction peak −53 dB at 10.1 GHz. The measured electric field intensities and phase distribution of the vortex metasurface also be displayed. Due to the limitation of experimental conditions, no test was done in the range greater than 18 GHz. Far-field results achieve good agreement between simulations and experiments, and the near-field measurements are a subtle difference in the experimental results. This work reveals the potential advantages of vortex waves in the fields of multifunctional electromagnetic stealth, beamforming for communication systems, etc.

Correction of antenna far-field image error data based on spherical scanning

The antenna pattern is an important graph for measuring antenna performance, and various parameters of the antenna can be observed from the antenna pattern. The method of obtaining antenna far-field pattern through near-field measurement technology and near-to-far-field transformation algorithm has the advantages of being free from environmental interference, low cost, and fast speed, making it an effective research method. In the process of spherical near-field measurement, it is necessary to ensure the stable operation of the probe used for measurement. If one of the probe channels is abnormal, it will have a serious impact on the measurement of the antenna pattern. This article proposes an algorithm for repairing near-field measurement data through Newton interpolation based on spherical scanning. The feasibility of the proposed method is verified by using the HFSS simulation data and the measured data of the microwave anechoic chamber. It is proved that the algorithm proposed in this paper has obvious effect on improving the accuracy of antenna pattern.

A reduction in near-field hydroacoustic flow noise using shark skin-inspired surfaces

Recent studies have demonstrated improved hydrodynamic performance for hydrofoils and uncrewed underwater vehicles (UUVs) using passive surface geometries such as riblets and shark skin-inspired denticles. However, little is known about the impact of added surface roughness on the production of flow-induced noise, a critical design consideration for UUVs in sensitive environments. We present here experimental results of near-field hydroacoustic noise measurements for boundary layer flow over smooth and bioinspired denticle-covered surfaces. A 3 in. wide and 10 in. long segment of staggered denticles was fabricated in-house using photopolymer 3D printing, and flow and acoustic measurements were made in a custom-built flow channel using particle image velocimetry (PIV) and miniature hydrophones. Comparing acoustic power spectra over flat and denticle-covered plates, we find both a scale- and frequency-dependent response in radiated noise. At low flow speeds (Re ∼ 20,000), the denticle surface shows a 20 dB enhancement in radiated noise at frequencies below 1000 Hz, but no change at higher frequencies. While at high flow speeds (Re ∼ 60 000), the denticle surface reduces radiated noise by ∼10 dB for frequencies between 4000 and 8000 Hz. Analysis of PIV data will elucidate the flow physics responsible for these effects. [Work sponsored by Office of Naval Research.]

Observation of gapless corner modes of photonic crystal slabs in synthetic translation dimensions

Second-order topological photonic crystals support localized corner modes that deviate from the conventional bulk-edge correspondence. However, the frequency shift of corner modes spanning the photonic band gap has not been experimentally reported. Here, we observe the gapless corner modes of photonic crystal slabs within a parameter space by considering translation as an additional synthetic dimension. These corner modes, protected by topological pumping in synthetic translation dimensions, are found to exist independently of the specific corner configuration. The gapless corner modes are experimentally imaged via the near-field scanning measurement and validated numerically by full-wave simulations. We propose a topological rainbow with gradient translation, demonstrating the ability to extract and separate specific frequency components of light into different spatial locations. Our work contributes to the advancement of topological photonics and provides valuable insights into the exploration of gapless corner modes in synthetic dimensions.

Detection and long-term quantification of methane emissions from an active landfill

Abstract. Landfills are a significant source of fugitive methane (CH4) emissions, which should be precisely and regularly monitored to reduce and mitigate net greenhouse gas emissions. In this study, we present long-term, in situ, near-surface, mobile atmospheric CH4 mole fraction measurements (complemented by meteorological measurements from a fixed station) from 21 campaigns that cover approximately 4 years from September 2016 to December 2020. These campaigns were utilized to regularly quantify the total CH4 emissions from an active landfill in France. We use a simple atmospheric inversion approach based on a Gaussian plume dispersion model to derive CH4 emissions. Together with the measurements near the soil surface, mainly dedicated to the identification of sources within the landfill, measurements of CH4 made on the landfill perimeter (near-field) helped us to identify the main emission areas and to provide some qualitative insights about the rank of their contributions to total emissions from the landfill. The two main area sources correspond, respectively, to a covered waste sector with infrastructure with sporadic leakages (such as wells, tanks, pipes, etc.) and to the last active sector receiving waste during most of the measurement campaigns. However, we hardly managed to extract a signal representative of the overall landfill emissions from the near-field measurements, which limited our ability to derive robust estimates of the emissions when assimilating them in the atmospheric inversions. The analysis shows that the inversions based on the measurements from a remote road further away from the landfill (far-field) yielded reliable estimates of the total emissions but provided less information on the spatial variability of emissions within the landfill. This demonstrates the complementarity between the near- and far-field measurements. According to these inversions, the total CH4 emissions have a large temporal variability and range from ∼ 0.4 to ∼ 7 t CH4 d−1, with an average value of ∼ 2.1 t CH4 d−1. We find a weak negative correlation between these estimates of the CH4 emissions and atmospheric pressure for the active landfill. However, this weak emission–pressure relationship is based on a relatively small sample of reliable emission estimates with large sampling gaps. More frequent robust estimations are required to better understand this relationship for an active landfill.

Improved planar near-field measurement based on data assimilation

The planar near-field measurement is widely used for antenna radiation testing because of its compact test space. However, due to the inevitable truncation error in the practical test, the measured radiation pattern of the antenna under test (AUT) is accurate only within certain confidence (angular) interval. In order to improve the measurement accuracy outside the confidence interval, this paper proposes an improved method of planar near-field measurement based on data assimilation. A reasonable mathematical model for the AUT radiation pattern is established so that the simulation data and the practical test data are fused with improved accuracy. The effectiveness of the proposed method for parameter selection has been verified experimentally, compared with the conventional method. In addition, the proposed method indicates a universal approach of complementing the measurement data with simulations or other data sources for improved accuracy.

An Effective Spherical NF/FF Transformation Suitable for Characterising an Antenna under Test in Presence of an Infinite Perfectly Conducting Ground Plane

An effective near-field to far-field transformation using a reduced number of near-field measurements collected via a spherical scan over the upper hemisphere, due to the presence of a flat metallic ground, is devised in this paper. Such a transformation relies on the non-redundant sampling representations of electromagnetic fields and exploits the image principle to properly account for the metallic ground, supposed to be of infinite extent and realised by perfectly conducting material. The sampling representation of the probe voltage over the upper hemisphere is developed by modelling the antenna under test and its image by a very adaptable convex surface, which is able to fit as much as possible the geometry of any kind of antenna, thus minimising the volumetric redundancy and, accordingly, the number of required samples as well as the measurement time. Then, the use of a two-dimensional optimal sampling interpolation algorithm allows the reconstruction of the voltage value at each sampling point of the spherical grid required by the classical near-field-to-far-field transformation developed by Hansen. Numerical examples proving the effectiveness of the developed sampling representation and related near-field-to-far-field transformation techniques are reported.

A Hierarchical Classification Method for High-accuracy Instruction Disassembly with Near-field EM Measurements

Electromagnetic (EM) fields have been extensively studied as potent side-channel tools for testing the security of hardware implementations. In this work, a low-cost side-channel disassembler that uses fine-grained EM signals to predict a program's execution trace with high accuracy is proposed. Unlike conventional side-channel disassemblers, the proposed disassembler does not require extensive randomized instantiations of instructions to profile them, instead relying on leakage-model-informed sub-sampling of potential architectural states resulting from instruction execution, which is further augmented by using a structured hierarchical approach. The proposed disassembler consists of two phases: (i) In the feature-selection phase, signals are collected with a relatively small EM probe, performing high-resolution scans near the chip surface, as profiling codes are executed. The measured signals from the numerous probe configurations are compiled into a hierarchical database by storing the min-max envelopes of the probed EM fields and differential signals derived from them, a novel dimension that increases the potency of the analysis. The envelope-to-envelope distances are evaluated throughout the hierarchy to identify optimal measurement configurations that maximize the distance between each pair of instruction classes. (ii) In the classification phase, signals measured for unknown instructions using optimal measurement configurations identified in the first phase are compared to the envelopes stored in the database to perform binary classification with majority voting, identifying candidate instruction classes at each hierarchical stage. Both phases of the disassembler rely on a four-stage hierarchical grouping of instructions by their length, size, operands, and functions. The proposed disassembler is shown to recover ∼97–99% of instructions from several test and application benchmark programs executed on the AT89S51 microcontroller.

Fast prediction of a high directivity antenna characterization for future wireless communication based on terahertz photonics

Fast prediction of high-directivity antenna characterization has been presented. The Cassegrain antenna working at J band frequency has been evaluated using a terahertz (THz) photonic system based on near-field measurement. The generation and detection of THz signal are based on a non-polarimetric electrooptic (EO) frequency down-conversion technique combined with a self-heterodyne system. The synthesis method is introduced to estimate far-field E and H-plane antenna characteristics. The antenna result is calculated using amplitude and phase-synthesized data based on the measured data. A near-field (NF) to far-field (FF) transformation is employed in the antenna radiation pattern. The effect of blocking objects on the antenna (supporting rods and sub-reflector) is discussed. The antenna characteristics of the measured and synthesized data are compared to the ITU F.699 recommendation. The synthesized result agrees with the measured one on the main lobe angle.

Electromagnetics-Aware Path for UAV-Based Near-Field Antenna Measurements Implemented With a High Dynamic Range SDR

Electromagnetics-Aware Path for UAV-Based Near-Field Antenna Measurements Implemented With a High Dynamic Range SDR

Disentangling doping and strain effects at defects of grown MoS2 monolayers with nano-optical spectroscopy.

The role of defects in two-dimensional semiconductors and how they affect the intrinsic properties of these materials have been a widely researched topic over the past few decades. Optical characterization techniques such as photoluminescence and Raman spectroscopies are important tools to probe the physical properties of semiconductors and the impact of defects. However, confocal optical techniques present a spatial resolution limitation lying in a μm-scale, which can be overcome by the use of near-field optical measurements. Here, we use tip-enhanced photoluminescence and Raman spectroscopies to unveil the nanoscale optical properties of grown MoS2 monolayers, revealing that the impact of doping and strain can be disentangled by the combination of both techniques. A noticeable enhancement of the exciton peak intensity corresponding to trion emission quenching is observed at narrow regions down to a width of 47 nm at grain boundaries related to doping effects. Besides, localized strain fields inside the sample lead to non-uniformities in the intensity and energy position of photoluminescence peaks. Finally, two distinct MoS2 samples present different nano-optical responses at their edges associated with opposite strains. The edge of the first sample shows a photoluminescence intensity enhancement and energy blueshift corresponding to a frequency blueshift for E2g and 2LA Raman modes. In contrast, the other sample displays a photoluminescence energy redshift and frequency red shifts for E2g and 2LA Raman modes at their edges. Our work highlights the potential of combining tip-enhanced photoluminescence and Raman spectroscopies to probe localized strain fields and doping effects related to defects in two-dimensional materials.

In-situ Low Power Tests of the ASDEX Upgrade ECRH Transmission Lines

An Electron Cyclotron Resonance Heating (ECRH) system employing 8 gyrotrons is in routine operation at the ASDEX Upgrade tokamak at IPP Garching. The gyrotrons are of two-frequency type operating at 105 and 140 GHz with a maximum output power of up to 1 MW and 10 s pulse length. The gyrotron output beams are coupled to 8 waveguide transmission lines via quasi-optical Matching Optics Units (MOUs). The oversized corrugated HE11 waveguides with a diameter of 87 mm are operated at atmospheric pressure with overall lengths between 65 and 103 meters. The number of quasi-optical miter bends per line is between 6 and 8. High mode purity in the transmission lines is critical with respect to both, losses and atmospheric breakdowns in the waveguides. Beam measurements at low power have been performed along the transmission lines and are compared to high power measurements. Near-field calculations and measurements of mm-wave beams radiated from open-ended HE11 waveguides show, that varying intensity patterns determine the distribution of Ohmic loading in compact mm-wave beam launching antennas, where the first mirror is located in the reactive near-field or close to the Fresnel maximum.

Joint OH-PLIF and Mie scattering imaging of enhanced water mist suppression of buoyant fires

This study presents the first near-field measurements of interactions between reaction layers and water mist droplets suppressing a buoyant turbulent diffusion flame that is representative of a fire. Joint Mie scattering and OH-PLIF are employed at a high repetition rate of 400 Hz to image the droplet field and OH structure, which are deemed here to approximate the high-temperature reaction zone. Compressed natural gas (CNG) buoyant diffusion flames are stabilised on the Sydney Turbulent Buoyant Fire Burner, which is surrounded by a low-velocity air co-flow that is seeded with fine water mist droplets (d32 ∼ 50 µm). The water mist is doped with varying concentrations of metal alkali salts (NaHCO3, KHCO3) that release radical scavenging molecules, providing enhanced suppression capabilities through chemical inhibition in addition to the quenching effect from the water droplets. The spray boundary condition across the wind tunnel exit plane is quantified using Phase Doppler Interferometry. Flame extinction limits are measured by defining the critical condition at which the flame destabilises and lifts off the burner exit plane. A stability map is developed to quantify suppression efficacy in terms of the water mist flow rate and inhibitor concentration. Joint Mie-OH images of selected cases at varying extinction levels show that the addition of inhibitor introduces frequent breakages in the OH layers, marking regions of local extinction and reignition. Large mass fractions of inhibitor in the water, which, once evaporated, produces excess salt crystals in the local extinction zones that causes streaks of salt clouds that line both the lean and rich side of the flame. The chemical scavenging effects of the OH radical by NaHCO3 and KHCO3 is quantified by evaluating the reduction of the mean OH fluorescence signal in the flame at varying locations. Probability density functions for the OH area characterise local extinction in the flame due to the radical scavengers. The order of OH radical depletion and localised extinction in the flame due to the water mist follows: KHCO3 > NaHCO3 > H2O.

Generic arrays of surface-positioned and shallow-buried gold multi-shapes as reference samples to benchmark near-field microscopes. Part 1: Applications in s-SNOM depth imaging

A wide palette of nanoscale imaging techniques operating in the near-field regime has been reported to date, enabling an important number of scientific breakthroughs. While the tuning and benchmarking of near-field microscopes represent a very important step for optimizing the outputs of the imaging sessions, no generally acknowledged standards exist yet in terms of calibration of near-field microscopes, which would play an important role in fully exploiting the potential of these instruments. With this work, we aim to contribute to filling in this gap, by introducing a prototypical sample, that holds potential for becoming a benchmark with respect to comparing the performances of diverse near-field measurement techniques, including traditional, aperture based, scanning near field microscopy (SNOM), or apertureless variants, such as scattering-type scanning nearfield optical microscopy (s-SNOM). The proposed samples have been thoroughly simulated, and an easy fabrication procedure is presented and demonstrated. In this latter context, Au-SiO2 samples sharing different configurations, in terms of geometry, number and depth of contrast yielding layers, enabling both surface and sub-surface nanoscopy measurements, were designed and fabricated. We argue that the proposed prototypical samples can be highly useful for benchmarking the outputs of various near-field microscopy techniques, as they facilitate a broad range of tests, relevant for comparing the performances and accuracy of many diverse investigation methods. We also introduce a methodology for numerically simulating the samples and their near-field after illuminating them with light of different wavelengths, as well as their simple process flow. This methodology can considerably augment their future use as a prototypical sample for the evaluation and calibration of current and next generation near-field nanoscopy techniques. Experimental evidence on the usefulness of these samples as s-SNOM testing and benchmarking tools is provided in the context of differentiation of surface and sub-surface structures, and influence of tip-sample distance on attainable amplitude and phase signals. We consider these efforts to represent an important, required step, in advancing the near-field imaging field, with important potential to augment the outputs of current near-field imaging systems, and to facilitate the development and benchmarking of next generation of near-field instrumentation.

Microwave Computational Imaging-Based Near-Field Measurement Method

Microwave Computational Imaging-Based Near-Field Measurement Method

Fast Planar Near-Field Measurements of Reduced Angular Pattern Domains

Fast Planar Near-Field Measurements of Reduced Angular Pattern Domains