Near-fault Pulse-like Ground Motions Research Articles

The damage-based inelastic displacement ratio for performance-based design of fully self-centering systems under pulse-like near-fault earthquake ground motions

In this investigation, the damage-based inelastic displacement ratio (IDR) for fully self-centering (SC) systems with flag-shaped hysteresis behavior is determined under pulse-like earthquake ground motions to use in performance-based design theory. Pulsive earthquakes are known as dangerous natural phenomena due to the location of structures in the vicinity of the fault with forward-directivity and high-velocity amplitude features, which expose the system to high risk. Before this, the IDRs were obtained based on constant-ductility and strength reduction factor intensities for designing new and evaluating existing structures with SC behavior. However, the issue could be extended to an energy-based theory using the Park-Ang damage model as a popular index among researchers, with the ability to consider record amplitude, frequency content, and duration. Therefore, the damage-based IDR was determined under 252 pulse-like records with 126 pairs at four damage levels, 30 periods of vibration, four ultimate ductility factors (µu), four stiffness hardening ratios (α), and three dissipative energy factors (βn) by conducting comprehensive nonlinear dynamic analysis. Then, the influence of the mentioned parameters on obtained IDRs is evaluated to propose a robust equation for estimating target displacement in these systems. Statistical results illustrate that the approximate equation based on normalizing the structural period to the predominated period can predict the target displacement compared to achieved ones from direct time-history analysis, where the difference between estimated and mean target displacements is below 15%.

Strain energy-based uniformity spectrum for elastic deformation control of super high-rise buildings under near-fault pulse-like earthquake excitations

To reasonably control the elastic lateral deformation of super high-rise buildings under near-fault pulse-like ground motions, inspired by a potentially close link between material utilization and normalized strain energy, a novel generalized uniformity spectrum of normalized strain energy (GUSNSE) is proposed via the nonuniform flexural-shear coupled model. With a full understanding of the characteristics of spectral shapes and the influence of shear-flexural stiffness ratios and mass-stiffness nonuniformity, the GUSNSE is fitted by artificial pulses. Utilizing the GUSNSE, a lateral stiffness estimation strategy is developed with the requirement of peak interstory drift ratios (IDRs). The feasibility and effectiveness of the proposed strategy are systematically demonstrated by comparison with not only the original lateral stiffness schemes of three significantly distinct buildings but also those designed for uniform IDRs. The accuracy of the fitted GUSNSE is also validated via the data estimated by four sets of ground motions. The GUSNSE-based strategy is promising as an efficient, reliable, and practical tool for providing lateral stiffness of super high-rise buildings in the preliminary design.

Seismic response of a ground-bridge structure system in horizontal and inclined liquefiable site to near-fault pulse-like ground motions

Previous earthquake events have indicated that bridge structures are more vulnerable to severe damage when subjected to near-fault pulse-like (NF-P) ground motions. Structural seismic damage will be exacerbated when bridges are located in liquefiable site. Meanwhile, the seismic response of bridges located in inclined liquefiable site is different from that of bridges in horizontal liquefiable site. This study focuses on exploring the seismic response of a ground-bridge structure system located in horizontal and inclined liquefiable site to the NF-P ground motions. The seismic response of the whole system to the near-fault non-pulse-like (NF-NP) and far-field (FF) ground motions is studied for comparison. Two three-dimensional (3D) finite element (FE) models of the ground-structure system considering soil-pile interaction are developed. They are associated with the horizontal and inclined liquefiable site, respectively. The seismic responses of the ground-bridge structure system to the three different types of ground motions (i.e., NF-P, NF-NP and FF) are comprehensively evaluated from two perspectives. On the one hand, the seismic time history responses of the ground-bridge structure system under single representative ground motion are comprehensively assessed. On the other hand, the average responses of the ground-bridge structure system under multiple types of ground motions are explored. The results reveal that in contrast to the NF-NP and FF ground motions, the NF-P ground motions have more significant effect on various responses of the ground-bridge structure system. In addition, compared to the bridge in horizontal liquefiable site, the bridge in inclined liquefiable site exhibits larger seismic responses. Therefore, the velocity pulse effect of the NF-P ground motions and the liquefaction effect of the inclined site need to be emphasized in structural seismic design.

Probability density evolution method based stochastic simulation of near-fault pulse-like ground motions

Quantifying the near-fault effect and establishing a reasonable model of near-fault pulse-like ground motions are particularly important for seismic design of structures in near-fault regions. Given the pronounced randomness associated with earthquakes, this study first proposes a novel stochastic model of near-fault pulse-like ground motions by combining the improved finite-fault model (IFFM) and the multivariate copula-based velocity-pulse model (CVPM). Further, a probability density evolution method (PDEM) based stochastic simulation method is developed, by which the model parameters can be determined in a unified probability space so as to ensure the consistency of two independent models. For illustrative purposes, the observed records collected from the 1999 Chi-Chi earthquake are used to generate new stochastic ground motions set. Two ground motions sets based on classical stochastic simulation methods are also presented for comparison. Numerical results show that the proposed method for stochastic simulation of near-fault pulse-like ground motions is reliable; the statistics of peak ground accelerations and spectral characteristics of simulated samples are consistent with station records. Besides, the proposed method accommodates the noteworthy randomness and proportion consistency of components associated with near-fault pulse-like ground motions, making it suitable for the stochastic response and reliability analysis of seismic structures in near-fault regions. This superiority is challenging to classical stochastic simulation methods that lack reasonable consideration of randomness and correlation associated with model parameters.

Power demands of structures from the Mw 7.8 earthquake of 6 February 2023 in Türkiye

Near-fault pulse-like (PL) ground motions generally transmit huge amounts of energy into structures during a relatively short period compared with non-pulse-like (NPL) ground motions. Consequently, power demand has emerged as a direct and distinctive measure for evaluating the risk that PL ground motions pose on structures. This study examines the power demands of structures subjected to ground motions recorded at 10 seismic stations in six city (or town) centers during the Mw 7.8 earthquake that hit Türkiye on 6 February 2023. The six cities (or towns), Golbasi, Kahramanmaras, Nurdagi, Osmaniye, Iskenderun, and Antakya, were the locations where an international team conducted field reconnaissance 2 weeks after the earthquake. This study first evaluates the power histories and other seismic responses of single-degree-of-freedom structures exposed to both PL and NPL ground motions. Subsequently, the power spectra of 20 horizontal ground motions recorded at the 10 stations are constructed and examined. Through these investigations, we hope to gain a better understanding of and raise awareness regarding the threats that PL ground motions pose to structures in the six cities (or towns) during the earthquake.

Optimum tuned mass damper inerter under near-fault pulse-like ground motions of buildings including soil-structure interaction

This study investigates the effectiveness of the tuned mass damper inerter (TMDI) in mitigating building response, considering the soil structure interaction (SSI). Three types of models are examined: single degree of freedom (SDOF), low-rise multi-degree of freedom (MDOF), and high-rise MDOF. Additionally, the natural period of the SDOF model is varied to explore the TMDI's efficacy across different ranges. Frequency and time domain analysis are conducted under pulse-like ground motions. The H2 and genetic algorithm (GA) are used to optimize the parameters of the TMDI. In this optimization method the transfer function for displacement response is minimized. In time domain analysis we used Newmark's integration method to solve the equation of motion for all the cases considered. It is found that the optimized TMDI proves highly effective in mitigating the displacement response of the buildings, accounting for SSI. Notably, its efficiency is more pronounced when pulse period aligns closely with the buildings' natural period. In addition, a notable pattern emerges, wherein the TMDI excels in mitigating response for buildings experiencing large motion, thereby enhancing safety under severe conditions. These findings offer valuable insights into the application and optimization of the TMDI to enhance seismic performance in various buildings, while considering complex interaction with the soil.

Fragility Assessment of a Long-Unit Prestressed Concrete Composite Continuous Girder Bridge with Corrugated Steel Webs Subjected to Near-Fault Pulse-like Ground Motions Considering Spatial Variability Effects

Prestressed concrete composite girder bridges with corrugated steel webs (PCCGBCSWs) are extensively employed in bridge construction because of their low dead weight, fast construction, and high prestressing efficiency. Moreover, PCCGBCSWs will experience deformation and failure of the corrugated steel webs, including steel fatigue and fracture, during earthquakes. These changes will introduce safety hazards, which can be addressed via bridge disaster prevention and mitigation. Because near-fault pulse-like ground motions (NFPLGMs) have high peak accelerations, these motions can easily cause damage to a bridge. Therefore, in this study, a seismic fragility assessment is performed for long-unit PCCGBCSWs subjected to NFPLGMs considering spatial variability effects, and a sensitivity evaluation of the seismic fragility is conducted considering girder type, bearing type, ground motion type, and apparent wave velocity to offer a point of reference for seismic design. The results show that PCCGBCSWs are less vulnerable than concrete bridges. The shock absorption effect of the friction pendulum bearing is better than that of the viscous damper. The impact of NFPLGMs on bridges is greater than that of near-fault non-pulse-like ground motions (NFNPLMs) and far-fault ground motions (FFGMs). The seismic fragility under nonuniform excitation conditions is greater than that under uniform excitation conditions, showing an increasing trend with decreasing apparent wave velocity.

Offshore near-fault pulse-like ground motions: An insight into the DONET1 seafloor ground motions from the 2016 Mw6.0 Off-Mie earthquake in Japan

Offshore near-fault ground motions were obtained by the DONET1 seafloor seismic network during the 2016 Off-Mie Mw6.0 earthquake that occurred in the Nankai Trough of Japan. These data provide an opportunity for exploring the characteristics of offshore near-fault ground motions, especially pulse-like ground motions. A comparison of the offshore and onshore near-fault ground motions indicates that the recorded offshore spectral acceleration (SA) in the period of 0.5–5.0 s and peak ground velocity (PGV) for this earthquake are higher than those of the onshore values, and the observed maximum spectral value (βmax) of the offshore near-fault ground motions in this event is underestimated by the design spectra in the seismic codes of China, the United States, and Japan. Based on the Hilbert-Huang transform method, eight offshore pulse-like ground motion records are identified and extracted in the Off-Mie earthquake. The primary analysis indicates that the pulse-like ground motion may be caused by the directivity effect and the radiation pattern. Comparing the pulse parameters, time-frequency parameters, and response spectra of offshore and onshore pulse-like ground motions, the findings demonstrate that within the context of this earthquake event, approximately half of the offshore pulse amplitude (Vp) exceeds the predicted values of onshore models; the low-frequency components of offshore pulse-like ground motions of this event are more pronounced, constituting a larger portion of the total ground motion energy; offshore pulse-like ground motions exhibit a tendency to possess higher maximum instantaneous energy (Einst) compared to onshore pulse-like ground motions with similar rupture distances. Moreover, the βmax of offshore pulse-like ground motions is found to be greater than that of onshore pulse-like ground motions in medium to long periods (>0.5 s). The identified and characteristic recognition of offshore near fault pulse-like ground motion revealed by this earthquake event raises new concerns about seismic design for offshore engineering.

Running safety analysis of a train-bridge coupled system under near-fault ground motions considering rupture directivity effects

The implementation of China’s high-speed railroad network and the “Bridges Instead of Roads” construction concept has raised concerns over earthquake safety. The complex mechanism of near-field ground motions poses greater risks than far-field ground motions due to the rupture directivity effect, and Hanging-wall/Footwall effects. The PEER earthquake database lacks earthquake records with fault distances less than 20 km, making it difficult to study train running safety (TRS) under near-fault ground motions. To address this issue, an empirical formulation method is adopted for near-fault three-dimensional seismic synthesis that considers source and site characteristics as well as rupture directivity effects using regression analysis. The method is verified with respect to directivity pulse and a train-bridge coupled system (TBCS) model is developed to verify its accuracy under earthquakes. Responses of the TBCS model under near-fault ground motions synthesized with different fault types, closest distances to the fault surface, and directivity parameters are analyzed by taking the average of the largest part of the response for comparison. Results show that dip-slip faults pose a greater danger than strike-slip faults, and the main reason for the hazard caused by rupture directivity effects is the generation of a forward directivity pulse, which makes the TBCS highly susceptible to derailment under near-fault pulse-like ground motions.

Utilising Artificial Neural Networks for Assessing Seismic Demands of Buckling Restrained Braces Due to Pulse-like Motions

Buckling restrained brace frames (BRBFs) exhibit exceptional lateral stiffness, load-bearing capacity, and energy dissipation properties, rendering them a highly promising choice for regions susceptible to seismic activity. The precise and expeditious prediction of seismic demands on BRBFs is a crucial and challenging task. In this paper, the potential of artificial neural networks (ANNs) to predict the seismic demands of BRBFs is explored. The study presents the characteristics and modelling of prototype BRBFs with different numbers of stories and material properties, utilising the OpenSees software (Version 2.5.0) for numerical simulations. The seismic performance of the BRBFs is evaluated using 91 near-fault pulse-like ground motions, and the maximum inter-storey drift ratio (MIDR) and global drift ratio (GDR) are recorded as a measure of seismic demand. ANNs are then trained to predict the MIDR and GDR of the selected prototypes. The model’s performance is assessed by analysing the residuals and error metrics and then comparing the trend of the results with the real dataset. Feature selection is utilised to decrease the complexity of the problem, with spectral acceleration at the fundamental period (T) of the structure (Sa), peak ground acceleration (PGA), peak ground velocity (PGV), and T being the primary factors impacting seismic demand estimation. The findings demonstrate the effectiveness of the proposed ANN approach in accurately predicting the seismic demands of BRBFs.

Seismic response analysis of pile-supported wharf under three types of near-fault ground motion

Near-fault pulse-like ground motions exhibit distinct properties, such as forward-directivity and fling-step effects. It is necessary to study the seismic response characteristics of the pile-supported wharf (PSW) under different near-fault ground motions. In this study, thirty near-fault ground motions were utilized as input motions, including forward-directivity, fling-step and non-pulse ground motions. A three-dimensional (3D) nonlinear finite element (FE) model was created to simulate the PSW structure. The seismic response (displacement, bending moment, and acceleration) of the PSW structure under 30 ground motions with peak ground acceleration (PGA), effective peak acceleration (EPA), improved effective peak acceleration (IEPA), peak ground velocity (PGV) and effective peak velocity (EPV) scaling were calculated and compared. The simulation results demonstrate that the PSW structure responds more significantly under two types of near-fault pulse-like ground motion. For near-fault pulse-like ground motions, PGV scaling is better for studying displacement/bending moment response of PSW structure than others. EPA scaling is suitable for studying the acceleration response of PSW structure.

Dynamic Response Analysis of Tunnel Underlain by a Soft Soil Layer Under the Near-Fault Pulse-Like Ground Motions

Affected by the near-fault pulse-like ground motions, the tunnels emerged in adverse geology, especially in an inhomogeneous strata are more vulnerable. However, the quantitative index effects on tunnel response during pulse identification are unclear and the propagation features of the near-fault pulse-like waves in a soft soil interlayer site are seldom revealed. In view of this, an improved energy-based pulse identification was used in this study to quantitatively extract the potential pulse energies emerged in velocity time-histories of ground motions. Subsequently, a series of numerical simulations were carried out to consider the critical parameters of soft soil layer and input ground motions. Finally, the dynamic response of the tunnel and interaction differences of soil and tunnel subjected to three types of ground motions were revealed. The result showed that the near-fault pulse-like ground motions pose a commonly severe damage to the tunnel, especially in the high pulse period ground motions based on the energy-based pulse identification method. The pulse energy of ground motions is an effective pulse index to analyze the seismic effects on tunnel when pulse periods of two different ground motions are uniform, and the index affects the tunnel in dynamic internal forces. More importantly, the existence of soft soil layer severely affects the propagation of input ground motions. At frequency domain, the ground response increases at high frequency component in the near-fault pulse-like ground motion, while the response shows a decreasing at low frequency component.

Seismic Performance of Reinforced Concrete Structures with Concrete Deficiency Caused by In-situ Quality Management Issues

Concrete is a widely used building material known for its cost-effectiveness and high resistance compared to alternative materials. However, uncertainties in the casting process due to variations in the environment and human error can compromise its strength, increasing the risk of collapse when subjected to seismic excitations. Previous studies have demonstrated the detrimental effects of earthquake vibrations on buildings and infrastructure. This study aims to fill the research gap by investigating the seismic behavior of reinforced concrete (RC) structures constructed with lower-quality concrete under near-fault pulse-like ground motions. The main objective of this research is to assess the impact of diminished concrete strength on structural rigidity and susceptibility to ground disturbances. Specifically, the study aims to quantify the extent of performance changes in defective structures, particularly those constructed with poor-quality concrete, in response to seismic activities. To achieve this, the research involves developing multiple finite element models and conducting nonlinear analysis to scrutinize their behavior. A key focus of the study is to compare the performance of various RC buildings with concrete defects to that of a benchmark model. This comparative analysis highlights the influence of suboptimal quality control on the nonlinear behavior of RC structures. Furthermore, the study examines the correlation between changes in building response and earthquake characteristics to provide comprehensive insights into the potential risks associated with substandard construction practices. Based on the results of this study, it was found that inadequate quality control of concrete significantly impacts the performance of RC frames subjected to pulse-like ground motions. The decrease in compressive strength of the concrete led to noticeable increases in various structural parameters, including story shear, overturning moments, story displacement, drifts, accelerations, and hysteretic energy. These findings highlight the detrimental effects of compromised concrete quality on the overall structural response. Doi: 10.28991/CEJ-2023-09-08-010 Full Text: PDF

Effects of pulse-like ground motions on tunnels in saturated poroelastic soil for obliquely incident seismic waves

It has been widely recognised that near-fault ground motions can be distinctly different from far-fault ground motions, in terms of their amplitudes and spectral characteristics, and there are a number of studies investigating the effects of near-fault ground motions on the structural response. However, only a few studies focus on underground tunnels, and most of them consider vertically incident seismic waves, neglecting the wave passage effect which is critical for long tunnels. This paper investigates the consequences of near-fault pulse-like ground motions on the seismic tunnel response, with an example of a tunnel embedded in saturated poroelastic soil. The input motions are represented by obliquely incident P1 waves, and the wave passage effect along the longitudinal direction is considered by a 2.5D modelling technique. The seismic tunnel response for near-fault pulse-like and far-fault ground motions is compared. Additionally, artificial ground motions, which have consistent acceleration response spectra with the near-fault pulse-like ground motions, but without velocity pulses, are generated to gain further insight into the contribution of velocity pulses. It is shown that the near-fault pulse-like ground motions can noticeably increase the tunnel internal forces, due to large seismic energy associated with the velocity pulses. For pulse-like ground motions with similar acceleration response spectra, the fling-step velocity pulse can be more detrimental to the tunnel than the forward-directivity velocity pulse. Moreover, the amplification effect of the near-fault pulse-like ground motions on the tunnel internal forces tends to be more prominent for large vertical angles of incidence, highlighting the significance of considering the oblique incidence case for seismic design.

Reliability assessment for hybrid solar tower under near-fault pulse-like ground motions using Kriging surrogate and subset simulation

Concentrated solar towers are commonly designed as high-rise hybrid structures, which exhibit properties of non-uniform mass and rigidity along the height of the tower, and consequently are vulnerable to strong seismic ground motions. This study presents a comprehensive analysis of the seismic performance of a hybrid solar tower, which is one of the tallest hybrid solar towers in the world. The hybrid solar tower includes a reinforced concrete tube at the bottom and a steel-truss tube at the top and is subjected to near-fault pulse-like ground motions. A simulation technique that utilizes the stochastic point-source model and a velocity pulse model was introduced to generate stochastic pulse-like ground motions. The stochastic response of the hybrid solar tower to near-fault pulse-like ground motions was computed to estimate the tower’s reliability. To enhance the efficiency of reliability estimation, an algorithm combining the Kriging surrogate and subset simulation (K-SS) was presented. The aggregate response of the tower was found to be significantly more damaging over the border of the reinforced concrete tube and the steel-truss tube than below the border. The study found that the hybrid solar tower has a reliability of 90.53% when subjected to stochastic near-fault pulse-like ground motions with a peak ground acceleration of 0.62 g. The findings of this study contribute to the understanding of the seismic performance of high-rise hybrid solar towers under near-fault pulse-like ground motions.

Effects of response spectrum of pulse-like ground motion on stochastic seismic response of tunnel

It is widely accepted that near-fault pulse-like ground motions potentially cause more severe damage to structures than ordinary ground motions. However, the effects of stochastic pulse-like ground motions on underground structures are not effectively considered. The impacts of response spectra of pulse-like ground motions on seismic response are also unclear. Hence, this study utilizes an underground tunnel to investigate the effects of response spectra of pulse-like ground motions on the stochastic seismic response by combining a pulse-like ground motion simulation method and a finite element method. The combination procedure enables stochastic seismic response analysis under spectrum-compatible pulse-like/ordinary ground motions. The finite element model considers the nonlinear dynamic properties of soil and soil–structure interaction. Monte Carlo simulations are carried out to quantify uncertainties of stochastic tunnel response. Results show that pulse-like ground motions cause larger bending moments for tunnel lining even when they match the same target spectrum of ordinary ground motions. Furthermore, the bending moment of tunnel lining is significantly amplified when the spectral acceleration of pulse-like ground motion contains bulges or multiple peaks in the ranges of 1 s–6 s. Therefore, the seismic risk of tunnels may be significantly underestimated in the near-fault regions without considering pulse-like ground motions and their spectral acceleration characteristics.

Effect of foundation embedment ratio in suppressing seismic-induced vibrations using optimum tuned mass damper

Tuned mass damper (TMD), which is used in structures to mitigate the dynamic responses caused by environmental loads, is tuned according to the dominant frequency of the structures. The dominant frequency of structure built on soil with low stiffness is significantly affected by the soil-structure interaction (SSI). In previous studies, only the surface foundation case is considered to investigate the design parameters of TMD considering SSI effects and the embedment depth of the foundation is neglected in these studies. Thus, this paper investigates the optimization of TMD for mitigation of responses of a high-rise building considering various depths of embedment and soil properties. The optimum parameters of TMD are investigated using five different optimization algorithms (i.e., simulated annealing, sequential quadratic programming, genetic algorithm, pattern search, and particle swarm optimization). The objective function minimizes the peak acceleration amplitude at the top of the structure. The effectiveness of optimum TMD is verified to use 20 near-fault pulse-like ground motions. The comparisons show that the embedment ratio of the foundation and the soil properties significantly affect the optimization of TMD.

Predictive model for seismic displacements of flexible sliding block subjected to near-fault pulse-like ground motions

A post investigation of landslides induced by strong earthquake events in recent years shows that near-fault pulse-like ground motions have a considerable impact on slopes. Accurate evaluation of the stability of slopes under near-fault earthquakes has become a crucial issue in seismic-prone areas. Permanent displacement is widely recognized as an effective index for evaluating the stability of slope. Based on the coupled analysis, an empirical earthquake-induced permanent displacement prediction model was developed. A displacement database of 318 pulse-like ground motions from 50 earthquake events was established. The proposed predictive model is a function of the maximum seismic coefficient-time history (kmax), maximum velocity coefficient of velocity-time history of the k-time history (kv-max), yield acceleration (ky), and period ratio (ratio of the natural period of the slope to the mean period of input motion, Ts/Tm). The dynamic responses (kmax and kv-max) are represented by two different functions. At small period ratios (Ts/Tm≤1.8), it is a function of peak ground acceleration (PGA), peak ground velocity (PGV) and ky. At large period ratios (Ts/Tm > 1.8), it is a function of PGV, Ts and ky. It successfully captured the velocity pulse and long period characteristics of pulse-like ground motions. Compared to the existing model, it is found that the model is more accurate when considering pulse-like ground motions. This prediction model can be used not only for the preliminary evaluation of slope stability but also for probabilistic seismic demand analysis of flexible slopes considering pulse-like ground motion in near-fault regions.

Optimum tuned tandem mass dampers for suppressing seismic-induced vibrations considering soil-structure interaction

In recent studies, it has been stated that tuned tandem mass dampers (TTMD) will be a practical mechanical solution to reduce the dynamic responses of structures under seismic excitations. However, since TTMD is tuned based on the dominant frequency of the superstructure, ignoring the soil-structure interaction (SSI), it may cause a notable deterioration in the control performance of the control devices. Thus, a methodology for the optimum design of TTMD positioned on the top story of a high-rise building due to near-fault pulse-like ground motions considering potential SSI effects has been investigated in this paper. Firstly, the TTMD is located on the top story of a well-known 40-story shear building, and the equations of motion for soil-structure-TTMD interaction are derived. Based on the sequential quadratic programming (SQP), the tuning parameters of TTMD are then found for different support conditions in the frequency domain. The efficiency of SQP is also compared with two meta-heuristic algorithms (i.e., simulated annealing and pattern search algorithms). The effectiveness of optimum TTMD is tested using 30 near-fault pulse-like ground motions using time-domain analyses. Numerical results showed that the optimum TTMD is more effective in suppressing the maximum displacement and inter-story drift of the building, considering SSI. It is also found that the frequency content of the earthquake, as well as the pulse period of the earthquake and soil type, has a significant effect on the control performance of the TTMD.

Seismic performance improvement of continuous rigid-frame bridges with hybrid control system under near-fault ground motions

To improve the seismic performance of continuous rigid-frame bridges (CRFBs) in near-fault earthquakes, this study developed a hybrid seismic control system (HSCS) combining a three-dimensional hybrid seismic isolation bearing (3D-HSIB) with a longitudinal fluid viscous damper (L-FVD). The hybrid numerical model of the HSCS and the nonlinear numerical model of a CRFB prototype were simulated in OpenSees. The study comparatively analyzed the seismic responses of non-controlled bridges and HSCS-controlled bridges under near-fault ground motions, evaluated the seismic control effectiveness of the HSCS, and investigated the effects of vertical excitations on the seismic performance of the CRFB. The numerical results show that the proposed HSCS effectively reduces the three-directional seismic responses of the CRFB. When the PGA is 0.4 g, the seismic isolation ratios of displacement, internal force, and pounding force all exceed 0.4. The hysteresis behavior of the HSCS can be fully utilized under three-directional excitations with pulse-like effects. The girder-end uplift behavior under vertical excitation can be effectively controlled by the proposed 3D-HSIB with a seismic isolation ratio of at least 0.6. When vertical excitation exceeds a certain level, the bearing is tensioned upward while axial tension force may also occur in main piers. Furthermore, the seismic responses under pulse-like near-fault ground motions are significantly larger than those under non-pulse near-fault ground motions. This work may provide a useful reference for the seismic analysis and design of CRFBs.