NE SW Research Articles

Genesis of Rare Metal Granites in the Nubian Shield: Tectonic Control and Magmatic and Metasomatic Processes

The Igla Ahmr region in the Central Eastern Desert (CED) of Egypt comprises mainly syenogranites and alkali feldspar granites, with a few tonalite xenoliths. The mineral potential maps were presented in order to convert the concentrations of total rare earth elements (REEs) and associated elements such as Zr, Nb, Ga, Y, Sc, Ta, Mo, U, and Th into mappable exploration criteria based on the line density, five alteration indices, random forest (RF) machine learning, and the weighted sum model (WSM). According to petrography and geochemical analysis, random forest (RF) gives the best result and represents new locations for rare metal mineralization compared with the WSM. The studied tonalites resemble I-type granites and were crystallized from mantle-derived magmas that were contaminated by crustal materials via assimilation, while the alkali feldspar granites and syenogranites are peraluminous A-type granites. The tonalites are the old phase and are considered a transitional stage from I-type to A-type, whereas the A-type granites have evolved from the I-type ones. Their calculated zircon saturation temperature TZr ranges from 717 °C to 820 °C at pressure < 4 kbar and depth < 14 km in relatively oxidized conditions. The A-type granites have high SiO2 (71.46–77.22 wt.%), high total alkali (up to 9 wt.%), Zr (up to 482 ppm), FeOt/(FeOt + MgO) ratios > 0.86, A/CNK ratios > 1, Al2O3 + CaO < 15 wt.%, and high ΣREEs (230 ppm), but low CaO and MgO and negative Eu anomalies (Eu/Eu* = 0.24–0.43). These chemical features resemble those of post-collisional rare metal A-type granites in the Arabian-Nubian Shield (ANS). The parent magma of these A-type granites was possibly derived from the partial melting of the I-type tonalitic protolith during lithospheric delamination, followed by severe fractional crystallization in the upper crust in the post-collisional setting. Their rare metal-bearing minerals, including zircon, apatite, titanite, and rutile, are of magmatic origin, while allanite, xenotime, parisite, and betafite are hydrothermal in origin. The rare metal mineralization in the Igla Ahmr granites is possibly attributed to: (1) essential components of both parental peraluminous melts and magmatic-emanated fluids that have caused metasomatism, leading to rare metal enrichment in the Igla Ahmr granites during the interaction between rocks and fluids, and (2) structural control of rare metals by the major NW–SE structures (Najd trend) and conjugate N–S and NE–SW faults, which all are channels for hydrothermal fluids that in turn have led to hydrothermal alteration. This explains why rare metal mineralization in granites is affected by hydrothermal alteration, including silicification, phyllic alteration, sericitization, kaolinitization, and chloritization.

Structural framework of the Caswell Sub-basin, North West Shelf, Australia

The Caswell Sub-basin, situated within the Browse Basin in the North West Shelf constitutes one of Australia’s primary hydrocarbon producing regions, with notable gas-condensate producing fields including Ichthys and Prelude. Jurassic syn-rift sandstones are extensively distributed across the basin and serve as one of the major reservoirs. However, reservoir sequences are typically intensely faulted and exhibit heterogeneity in thickness and lithofacies, with some areas experiencing localised erosion on uplifted fault blocks (e.g. Northern Caswell Sub-basin). Hence, understanding the nature of the 3D fault patterns and their growth history is crucial for evaluating the reservoir characteristics for field development and additional exploration activities. This study, therefore, aims to evaluate the structural framework and the tectonic evolution of the Caswell Sub-basin. Detailed structural interpretation of Paleozoic and younger sequences was conducted using multiple 3D seismic datasets extending over Ichthys, Prelude, Lasseter, and Crown fields. Our study focuses mainly on Mesozoic faulting patterns and kinematics evaluated from interpreted structural maps, thickness changes of each stratigraphic interval and fault throw profiles of major bounding faults. The extensional phase during the Early–Middle Jurassic triggered the development of NE–SW trending faults and the deepening of the Brewster Graben. While, from the Late Jurassic to the Early Cretaceous, the development of E–W trending faults in the north of the Crown and Lasseter fields indicate a shift in the regional stress regime. We highlight the importance of evaluating the structural linkage from basement to cover sequences to achieve a comprehensive understanding of reservoirs and associated petroleum systems.

Distribution and geographical differentiation of the Central Asian endemic species Lyela myops (Staudinger, 1881) (Lepidoptera, Nymphalidae, Satyrinae)

The article describes a new subspecies, Lyela myops tashkumirica ssp. nov. (Lepidoptera, Nymphalidae, Satyrinae) from Tashkumir vic., Jalal-Abad Region, Kyrgyzstan. The differences between the new taxon and the previously described L. myops myops (Staudinger, 1881) (E Kazakhstan and N Kyrgyzstan), L. myops mangystavica Lukhtanov, 1994 (W Kazakhstan), L. myops babatagi Tshikolovets, [1998] (S Uzbekistan and E Turkmenistan) and L. myops tekkensis (Staudinger, 1886) (NE Iran and SW Turkmenistan) are described in detail.

Geology and ore fluids geochemistry of the Hamzeh–Gharanin orogenic gold deposit, NW Iran

The Hamzeh–Gharanin gold deposit (HGD) is located in the Qolqoleh–Kasnazan shear zone in the northwest of Sanandaj–Sirjan Zone (SSZ) and 40 km SW of Saqez. The main rock units are an assemblage of the Precambrian metasedimentary (pelitic) rocks and the Cretaceous phyllite associated with marble interlayers. The post–Cretaceous intrusive granitoids with NW–SE trends intruded within these two units. Mineralization occurs mainly within the NE–SW extensional veines and veinlets in proto–mylonitic, mylonitic and ultra–mylonitic rocks. Hydrothermal alterations consist of sericitization, carbonatization, silicification and chloritization. The main ore minerals include pyrite, chalcopyrite, arsenopyrite, pyrrhotite, sphalerite, galena, gold, magnetite and hematite. The fluid inclusions study from quartz minerals associated with the mineralization shows four different phases: single vapor phase (V; type I), single liquid phase (L; type II), liquid–vapor biphasic (LV; type III) and three phases (LLV; type IV). Microthermometric studies were performed on types III and IV of fluid inclusions. Homogenization temperatures (Th) for Types III and IV inclusions vary between 138 and 310 °C (mean 230 °C) and 250–335 °C (mean 300 °C) and their salinity varies between 0.52 and 13.87 and 4.79 to 9.58 (wt% NaCl), respectively. Moreover, the density of Types III and IV inclusions vary from 0.71 to 0.927 g/cm3 and 0.700–0.870 g/cm3, respectively. The oxygen (in quartz: 4.58–7.80 ‰; mean 5.82 ‰) and δ34S (in pyrite: 5.54–6.28 ‰; mean 5.91‰) isotope compositions of the mineralizing fluids indicate an insignificant meteoric water input during hydrothermal evolution and a magmatic origin of sulfur in the deposit which is broadly similar to those of orogenic gold deposits worldwide.

Garnet geochronology, major and trace element geochemistry of the Huanggangliang Fe-Sn polymetallic deposit, NE China

Cu-Fe (Au), W-Sn (Mo), Pb-Zn (Ag) and other element assemblages are common in many skarn deposits, but examples of Fe and Sn coexistence in nature are relatively rare. The Huanggangliang deposit in the southern Great Xing'an Range is the largest Fe-Sn polymetallic deposit in northern China, and there are five main mining areas (SK Ⅰ–SK Ⅴ) distributed along a SW–NE trend. SK Ⅰ and SK Ⅲ are the two larger mining areas in the Huanggangliang deposit, and their mineral assemblages and wall-rocks are significantly different: cassiterite and metal sulfides are duncommon in SK Ⅰ (andesite), while they are widely distributed in SK Ⅲ (marble). Garnet is widely distributed in SK Ⅰ and SK Ⅲ mining areas, and provides a good opportunity to explore the mechanism of Fe-Sn assemblage differentiation. Three types of garnet are distinguishable (Grt 1, Grt 2 and Grt 3) based on their mineral associations, textures and locations, and they mainly belong to the andradite-grossular solid solution series. The LA–ICP–MS U-Pb ages of the garnets from SK Ⅰ and SK Ⅲ are 136.0 ± 1.2 Ma (n = 25, MSWD = 1.9) and 136.2 ± 2.6 Ma (n = 37, MSWD = 1.8), respectively, suggesting that magmatic-hydrothermal activity in these two mining areas began at the same time. Grt 1 (located deep in SK Ⅰ and SK Ⅲ) and Grt 2 (located shallowly in SK Ⅰ) are mainly andradite, while Grt 3 (located shallowly in SK Ⅲ) is mainly grossular. They are all enriched in high field strength elements (HFSEs) and depleted in large ion lithophile elements (LILEs), and their REE patterns are enriched in light rare earth elements (LREEs) and depleted in heavy rare earth elements (HREEs). However, Grt Ⅰ-1a and 1b (deep garnets in SK Ⅰ) exhibit obvious positive Eu anomalies, while the other garnet types exhibit negative or no obvious Eu anomalies. Additionally, Grt 3 has high contents of V, Sn, U, Th, Zn and Y, and low contents of W and Mo. This pattern implies that the garnets in deep SK Ⅰ may have formed under oxidizing conditions with high temperatures, high oxygen fugacity (fO2) and weak acidity, while the garnets in shallow SK Ⅲ formed under reducing conditions with moderate temperatures, moderate fO2 and near-neutral pH. The garnets in shallow SK Ⅰ and deep SK Ⅲ may have formed under weak oxidation–reduction conditions at moderate to high temperatures, moderate fO2 and weakly acidic to neutral pH conditions. Our newly reported field geological, mineralogical, and geochemical data from garnet suggest that the ore-forming fluids of the Huanggangliang were magmatic-hydrothermal fluids mixed with slightly acidic external fluids, chloride complexes may have been the main transport ligands of REEs. The metallogenic environment may be an important factor leading to the difference of mineral assemblages in the Huanggangliang deposit.

The Late Cenozoic crustal deformation in the northeastern periphery of the Qaidam Basin, northwest China

The northeastern periphery of the Qaidam Basin is a crucial region for comprehending the northeastward growth of the Tibetan Plateau, as it documents Late Cenozoic crustal deformation that elucidates the plateau's growth process. In this study, we reconstruct three stages of crustal deformation in the northeastern periphery of the Qaidam Basin during the Late Cenozoic based on interpretation of growth strata from five seismic profiles, structural mapping of the typical superimposed folds and detailed detrital zircon analysis within the study area. (1) During the Early Miocene to Late Miocene period (23–8.6 Ma), there was NW–SE extensional deformation in the northeast margin of the Qaidam Basin, which exerted control over the deposition of the Youshashan Formation. (2) The NW–SE shortening occurred during the Late Miocene period (8.6–8.1 Ma), subsequent to the deposition of the Youshashan Formation and preceding the deposition of the Shizigou Formation, resulting in a parallel unconformity between these two geological units. (3) The intense shortening of the NE–SW direction occurred during the Late Miocene and Pliocene epochs (8.1–2.5 Ma). The timing of this deformation aligns with the sedimentary age of the Shizigou Formation, suggesting that the initial deformation age may represent the onset of NE extrusion from the Tibetan Plateau towards the northeast margin of the Qaidam Basin. The present study not only delineates a Late Cenozoic structural dome resulting from two‐stage crustal shortening in the northeastern periphery of the Tibetan Plateau, but also provides a crucial evidence for reconstructing the Late Cenozoic intracontinental deformation process in this region.

Inference of fracturing zones and degrees of fluid content in the Las Tres Virgenes volcanic complex based on an analysis of seismic anisotropy

AbstractAnisotropy strength in the Tres Vírgenes Volcanic Complex, Baja California Sur, Mexico, is analyzed employing 558 seismic events collected from 2009 to 2013. It was possible to delineate zones and volumes with the highest fracture densities, which are mainly located between the El Viejo and El Azufre volcanoes and around the La Reforma–El Azufre fault system, near some other mapped faults in the area (e.g., El Azufre, El Partido, El Volcán, El Viejo 1, and El Viejo 2 faults); likewise toward the La Virgen volcano and around the La Virgen-El Campamento and El Volcán faults. Individual delay times reached values of up to 0.16 s and an anisotropy percentage of up to 10.3%, with a pervasive anisotropy observed from at least a hypocentral distance of 3.5 km. High fracturing levels are observed from a depth of 7.0 km. Differences between splitting delays and the dominant frequency peaks obtained from the fast S phases allowed considering fracture systems with different degrees of fluid contents. Fractures with minor fluid contents were assumed for delay times higher than 0.03 s with lower dominant frequency peaks (< 1.0 Hz). Higher concentrations of fluid inclusions were assumed for splitting delays higher than 0.03 s but with larger dominant frequency peaks (> 1.0 Hz). Fractures systems chemically sealed or impermeable sealing caps were assumed for low splitting delays (< 0.02 s) with low dominant frequencies (< 1.0 Hz). These different fracture systems seem to be observed at least from 5- to 6-km depth intervals. Likewise, an analysis of the fast polarization directions with respect to different depth ranges (spanning from 3.0 to 8.0 km) has allowed observations of a strong NW–SE regional fracture system accompanied by minor NE–SW fracture systems. However, noteworthy variations from NW–SE to NE–SW, N–S, and E–W in fast polarization directions in rose diagrams have been preferentially observed for those seismic events deeper than 4–5 and 5–6 km in some areas, which could be indicating the location of magmatic bodies that probably caused the reorientation on fracture systems by changes in the local stress field. These magmatic bodies might be supported by a decrease in the dominant frequency peaks (lower than 1.0 Hz), percentage of anisotropy (from 0.1 to 2.5%), and S-wave velocities (from 1.0 to 2.7 km/s), which seem to be located from the 4.0-km depth but more concentrated from the 5–6-km depth interval.

Influence of a rigid backstop on the flow pattern during thrusting of the supracrustal Balsfjord Series of the North Norwegian Caledonides

The Caledonian evolution of the low–medium grade Balsfjord Series (Troms, Northern Norway) is characterized by four sets of deformation structures that developed progressively during burial and exhumation from underneath the high-grade Nakkedal and Tromsø nappe complexes. The Balsfjord Series commonly displays top-to-the SSE–SE directed movement during the development of the main metamorphic fabric with local folding at different evolutionary stages. However, we document a structural horizon within the Balsfjord Series showing a strong reorientation of the regional stretching lineation from NW–SE to E–W and finally NE–SW. This rotation occurred during exhumation and is interpreted as a lateral escape mechanism resulting from thrusting of the rheologically soft Balsfjord Series against the rigid backstop of the Lyngen Magmatic Complex and the Mauken Window basement.U–Pb dating of titanite from shear zones within the West Troms Basement Complex yielded an age of 429 ± 5 Ma interpreted as the age of thrusting of the overlying Balsfjord Series. To account for all field relationships with the overlying and underlying units, we interpret the tectonic evolution of the Balsfjord Series as a result of an interaction of two sutures active at ca. 430 Ma.

Structure of the Plio-Quaternary coastal aquifer (Mediterranean Basin, Tunisia): insights from gravity and seismic analysis

This research paper presents an investigation of an aquifer structure using a combination of gravity and seismic analyses, calibrated by hydrogeological data. This work illustrates how crucial it is to study geological structures and fault networks as preliminary work to understand water- and pollutant-flow systems and aquifer vulnerability, especially with the increased frequency of drought events and climate change pressures. A Plio-Quaternary coastal northeastern aquifer in Tunisia was chosen as the study case. First, a hydrogeological approach was performed using water wells, and piezometer data showed an important fluctuation in the piezometric level and a notable depression in the piezometric surface observed in the southern part of the study area. Secondly, gravity data were analysed and calibrated using a seismic profile. The results demonstrated the presence of shallow NE–SW faults less than 300 m below the region's principal wadis, as well as deeper faults of varying depths (from 400 to 2600 m) that influence the basin structure, aquifer geometry and resulting water flow. The combination of these approaches revealed that the variations in the aquifer thickness, piezometric surface depression zones and groundwater flow are mainly controlled by shallow and deep geological structures and their tectonic reactivation.

Strain partitioning in the Patagonian Broken Foreland: influence of structural inheritance of early Andean deformation

In the context of Andean-type oblique convergence, strain partitioning between thrust and strike-slip tectonics is well documented in the arc region. However, the impact of this configuration in the retroarc remains poorly understood, especially in broken foreland systems where basement structures compartmentalize the retroarc into small intermontane sedimentary basins. The spatiotemporal analysis of tectonic evolution and the role of inherited weaknesses in this area are often debated. This study addresses these uncertainties by integrating geometric and kinematic analyses of tectonic structures within the Sañicó Massif in the North Patagonian foreland. Results reveal two deformational episodes. The initial Late Cretaceous to Paleocene episode represents a contractional deformation phase, with NW–SE shortening direction causing the tectonic inversion of pre-Andean rift depocentres. The second episode records a Neogene transpressional regime with both contractional and strike-slip deformation, with east–west to NE–SW shortening direction, which progressed under reactivation of pre-existing structures and generated new faults. This work demonstrates the Neogene propagation of the strike-slip regime towards the retroarc, defining strain partitioning at various scales and highlighting its interaction with pre-existing structures. These results enhance our understanding of the complex tectonic history in oblique subduction settings, providing significant evidence of the structural inheritance in retroarc systems.

Segmented growth of reactivated major bounding faults and their control on basin structures: Insights from the Nanpu Sag, Bohai Bay Basin, eastern China

AbstractA thorough insight into the initiation, segmentation, propagation and interaction of multitrend basin‐bounding faults is crucial to restoring the growth history of the faults and clarifying the fault growth pattern and its influence on the structures developed along the margin due to the growth of the basin‐bounding faults, but systematic studies on the individual influence of the evolution of each fault segment on the present structure are lacking. Based on 3D seismic data, the timing and growth of multitrend basin‐bounding faults were analysed using T‐z plots and throw backstripping, allowing us to determine the individual effects that each fault segment evolution exerteds on the present‐day configuration of the northern margin of the Nanpu Sag. The basin‐bounding fault is composed of the Xinanzhuang and Baigezhuang faults, and the Xinanzhuang fault comprises three linked segments with varying orientations (i.e., NE–SW, E–W, and NNE–SSW). In comparison, the Baigezhuang fault comprises only two linked NW–SE‐oriented fault segments. The evolution process can be divided into three stages. (1) During the early synrift I stage, namely, the isolated fault stage, five isolated multitrend basin‐bounding segments were active. (2) During the late synrift I stage, namely, the hard‐linkage stage, the five segments propagated laterally and linked with each other, behaving as a single fault. Meanwhile, the NE‐trending No. 5 Fault bifurcated upward from the basin‐bounding fault to accommodate local stress, and the NW‐trending Gaobei Fault deviated from the basin‐bounding fault controlled by local stresses induced by differential activities of the multitrend fault segments under the same far‐field stress. (3) During the synrift II to postrift linkage development stage, the extension orientation changed from NW–SE‐ to N–S, and additional displacement accumulated along the basin‐bounding fault without further lateral propagation. Newly formed E–W‐trending faults developed orthogonal to the extension orientation and linked with preexisting NE‐ or NW‐trending faults, forming a complex fault zone. In addition, influenced by the geometry of the basin‐bounding fault, the Laoyemiao Anticline formed by gravitational collapse under the dual action of a rollover anticline and transverse anticline. Furthermore, the evolution of the basin‐bounding faults played an important role in controlling the source‐to‐sink system, and the transition zone was the main provenance channel formed by the segmented growth of the faults. This study provides new insight into multitrend large fault evolution, and their impact on basin development provides a comprehensive explanation of the later structures developed in polyphase rifts.

Refining the final phase of the seafloor spreading process in the West Philippine Basin through the recalibration of magnetic isochrones

The evolution of the West Philippine Basin (WPB), the largest back-arc basin in the northwestern Pacific margin, remains unclear, mainly due to the lack of accurate magnetic chronological constraints. We integrate a newly acquired shipborne magnetic grid and EMAG2 data to investigate the final phase of seafloor spreading and post-spreading magma-poor extension in the WPB during the Eocene and Oligocene. An ∼800 km-long transect located in the eastern part of the WPB was modeled to recalibrate the magnetic isochrones. The results show that the seafloor spreading direction of the WPB rotated counterclockwise from ∼NE–SW to ∼NNE–SSW at ∼44 Ma (Isochrone C20r) and from ∼NNE–SSW to ∼N–S at ∼39 Ma (Isochrone C18n.1n). After the latter rotation, the spreading became unstable, decreased significantly, fluctuated, and finally ceased at ∼33 Ma (Isochrone C13n). The post-spreading magma-poor extension along the Central Basin Rift (CBR) driven by the initial opening of the Parece Vela Basin (PVB) began ∼4 Myr after the cessation of spreading. In the area east of ∼132°E, the CBR inherited the fossil spreading center, but to the west, it manifests a newly formed rift valley intersecting the segmented fossil spreading center. The destabilization of the spreading process in the marginal basin during its extinction phase was predominantly controlled by the dynamic process and stress field imposed by the adjacent plate boundaries.

Modelling principal stress orientations in the Arabian Plate using plate velocities

Abstract We model maximum principal horizontal stress orientations in the Arabian Plate using a 3D finite element approach in conjunction with plate velocities. To capture the impact of geometry and tectonics, the model considers an accurate plate boundary shape and associated deformations. Three primary geological units represent plate architecture: sedimentary cover, crust and upper mantle. The mesh resolution varies to capture important geometrical features. Subsequently, we calculate the stress field using the force balance equation. Displacement boundary conditions are evaluated as accumulative deformation. NE–SW maximum principal horizontal stress (S Hmax ) azimuths dominate in northeastern Saudi Arabia and Kuwait, whilst NW–SE to NNW–SSE define the Dead Sea area. The Red Sea Basin and Saudi Arabia's interior is characterized by north–south S Hmax azimuths. Iraq's western area shows azimuths from NNW–SSE to NW–SE due to the collision at the Zagros Mountain Range, but changes to NE–SW in the east at the Zagros fold-and-thrust belt. An extensive literature review reveals publicly available S Hmax azimuth data which augment the sparse records compiled in the World Stress Map database. Our simulated S Hmax azimuths are consistent with these data. The results further corroborate ongoing tectonic processes, deepen our understanding of in situ stress variation drivers and inform current elastic deformation mechanisms in the Arabian Plate.

Caledonian reactivation and reworking of Timanian thrust systems and implications for latest Mesoproterozoic to mid-Paleozoic tectonics and magmatism in northern Baltica

Background The Trollfjorden–Komagelva Fault Zone is the southernmost thrust fault of the Timanian Orogen and extends for thousands of kilometers from northwestern Russia to northern Norway. Though there is little about its location onshore northeastern Norway, where it is mapped as a major fault system dominantly comprised of NNE-dipping thrust faults, its continuation to the west below Caledonian nappes and offshore post-Caledonian sedimentary basins remains a matter of debate. Methods The present study provides a more definitive answer about the continuation of Trollfjorden–Komagelva Fault Zone west of the Varanger Peninsula by using seismic reflection, bathymetric, topographic, and magnetic data onshore Finnmark and offshore on the Finnmark Platform. Results The NNE-dipping Trollfjorden–Komagelva Fault Zone merges with a recently identified northwest-dipping brittle–ductile thrust, the Sørøya–Ingøya shear zone, which was previously thought to have formed during the Caledonian Orogeny. The present study demonstrates that the Sørøya–Ingøya shear zone represents a portion of the Trollfjorden–Komagelva Fault Zone that was folded into a NE–SW orientation and reactivated as a top-southeast thrust during the Caledonian Orogeny, while other portions of the Trollfjorden–Komagelva Fault Zone (e.g., on the Varanger Peninsula) were reactivated as strike-slip faults. The study also documents the presence of another major, NNE-dipping Timanian shear zone with a similar geometry to the Trollfjorden–Komagelva Fault Zone north of the Varanger Peninsula. Conclusions The present study suggests that (1) the Seiland Igneous Province formed in a backarc setting, (2) metasedimentary rocks of the Kalak Nappe Complex deposited along the Baltican margin of the Iapetus Ocean, possibly in a late–post-Grenvillian collapse basin, (3) the Iapetus Ocean was much narrower than the several thousands of kilometers width commonly proposed, and (4) early Neoproterozoic magmatism in northern Norway is related to the initial breakup of Rodinia.

Sedimentary differentiation caused by glaciation and orogeny during the Ordovician–Silurian transition in the southern Sichuan Basin, China

The Wufeng–Longmaxi shales, which were deposited during the Ordovician–Silurian transition in the southern Sichuan Basin, exhibit distinct lithofacies transitions. The shift from organic-rich siliceous shale to organic-poor mixed shale and argillaceous shale is attributed to the influences of the Hirnantian glaciation and the Kwangsian Orogeny. Nevertheless, debates persist regarding the mechanisms underlying these significant lithofacies transformations. This study employs sequence stratigraphy, petrology, and geochemical analysis of key wells to unveil crucial insights. The findings indicate: 1) the Wufeng Formation to the Long-1 Member could be divided into two third-order sequences; 2) the waterbody underwent a transition from anoxic and strongly restricted conditions to oxic and moderately restricted conditions; and 3) the trend in formation thickness changed from an E–W orientation to a NE–SW orientation. The results suggest that considerable sediment condensation and anoxia resulting from glacier melting in the early Rhuddanian played a pivotal role in the formation of organic-rich siliceous shale. During the Middle Rhuddanian–Aeronian, the accelerated uplift caused by the Kwangsian Orogeny offset the transgression induced by glacier melting, leading to shallow water conditions and increased terrigenous influx. This diluted the organic matter content in the sediment, and subsequent turbidity currents altered sediment composition, driving the lithofacies transformation into organic-poor mixed shale and argillaceous shale. The study posits that the sedimentary differentiation in the southern Sichuan Basin during the Ordovician–Silurian transition is linked to the initiation and progression of the far-field effects of the Kwangsian Orogeny.

Joint interpretation and modeling of potential field data for mapping groundwater potential zones around Debrecen area, Eastern Hungary

The Debrecen area, as part of the Great Hungarian Plain (GHP), is associated with a multi-aquifer system that is overly exploited to fulfill the development plans. This research aims to jointly interpret and model gravity and magnetic data to map the subsurface geology and structures that govern groundwater occurrence. Various potential field techniques, including spectral analysis, anomaly derivatives, analytical signal, and Euler deconvolution were employed to map the distribution and depth of the buried geological structures. The combination of the potential field techniques enabled the construction of a detailed lineament map, providing valuable insights into the distribution of the subsurface structural features. It was indicated that the main structural trend is NW–SE and NE–SW, that coincides with the main structural trends in Hungary. Subsequently, a lineament density map is derived, indicating that the eastern, central, and northwestern parts of the area form the most promising zones for groundwater prospection. The joint inversion of gravity and magnetic data has further enhanced the understanding of subsurface geology. The depth to the basement rock varied between 1.18 and 2.2 km. The highest depth to the basement meets with thick sedimentary sequences bounded by normal faults forming graben and horst structures. Moreover, the distribution of these sediments is investigated using lithological logs indicating the thickness of the main hydrostratigraphic units in the Debrecen area. These units include Nagyalföld Aquifer, Algyő Aquitard, Endrőd Aquitard, and Miocene Badenian Aquifer units, which mainly consist of sand, silt, marl, and gravel. The recent study demonstrated the effectiveness of the joint interpretation in enhancing the knowledge of lithology and geological structures. However, a detailed geophysical survey is recommended to characterize the hydrostratigraphic units in the Debrecen area.

Petroleum geological characteristics and exploration targets of the oil-rich sags in the Central and West African Rift System

Based on seismic, drilling, and source rock analysis data, the petroleum geological characteristics and future exploration direction of the oil-rich sags in the Central and West African Rift System (CWARS) are discussed. The study shows that the Central African Rift System mainly develops high-quality lacustrine source rocks in the Lower Cretaceous, and the West African Rift System mainly develops high-quality terrigenous organic matter-rich marine source rocks in the Upper Cretaceous, and the two types of source rocks provide a material basis for the enrichment of oil and gas in the CWARS. Multiple sets of reservoir rocks including fractured basement and three sets of regional cap rocks in the Lower Cretaceous, the Upper Cretaceous, and the Paleogene are developed in the CWARS. Since the Late Mesozoic, due to the geodynamic factors including the dextral strike-slip movement of the Central African Shear Zone, the basins in different directions of the CWARS differ in terms of rifting stages, intervals of regional cap rocks, trap types and accumulation models. The NE–SW trending basins have mainly preserved one stage of rifting in the Early Cretaceous, with regional cap rocks developed in the Lower Cretaceous strata, forming traps of reverse anticlines, flower-shaped structures and basement buried hill, and two types of hydrocarbon accumulation models of “source and reservoir in the same formation, and accumulation inside source rocks” and “up-source and down-reservoir, and accumulation below source rocks”. The NW–SE basins are characterized by multiple rifting stages superimposition, with the development of regional cap rocks in the Upper Cretaceous and Paleogene, forming traps of draping anticlines, faulted anticlines, antithetic fault blocks and the accumulation model of “down-source and up-reservoir, and accumulation above source rocks”. The combination of reservoir and cap rocks inside source rocks of basins with multiple superimposed rifting stages, as well as the lithologic reservoirs and the shale oil inside source rocks of strong inversion basins are important fields for future exploration in basins of the CWARS.

The Effect of the Emeishan Mantle Plume on the Genetic Mechanism of the Maokou Formation Reservoir in the Central Sichuan Region

Thin layers and high-yield dolomite reservoirs were recently discovered in the Permian Guadeloupian Maokou Formation. The genetic mechanism of this reservoir is controversial because of its complex sedimentation and diagenesis in the Maokou Formation. Traditionally, the genesis has focused on sedimentation, karst, and fracture, whereas the influence of the Emeishan mantle plume activity (EMP) has been ignored. In this study, we enumerated petrographic (grouped into micritic bioclastic limestone, limy dolomite, grain dolomite, dolomite cement, calcite cement, and saddle dolomite) and geochemical data (δ13C, δ18O, REE, and 87Sr/86Sr) from a microscopic perspective to support the impact of EMP on reservoirs. We conclude that EMP activity altered the sedimentary environment and induced a complex diagenesis. The paleogeomorphic reconstruction data indicate that the EMP caused an uplift zone in the NE–SW direction, depositing advantageous high-energy beach facies. In terms of diagenesis, the abnormally high 87Sr/86Sr ratios and REE with positive Eu anomalies suggest that dolomitization was influenced by both seawater and hydrothermal fluids. Based on the above evidence, we established a reservoir genetic model for the Maokou Formation related to the intensity of the EMP. This study provides a new perspective on the mantle plume activity for the study of carbonate reservoir genesis.

Delineation of lineaments for groundwater prospecting in hard rocks: inferences from remote sensing and geophysical data

Egypt is grappling with water scarcity challenges, which are exacerbated by extensive urban development in arid coastal regions with rugged terrain. Although desalinated water is an alternative source in the remote Halayeib region of Southeast Egypt, its cost increases reliance on groundwater from the intricate aquifers. This study aims to accurately delineate hydro-structural features, known as lineaments, and assess their impact on the groundwater conditions in this promising region. This integrated approach involves the assessment of various spaceborne sensors, including optical (Landsat 8), Digital Elevation Models (ALOS and ASTER-DEMs), and radar (Sentinel-1), using geospatial and geostatistical techniques within the Geographic Information System (GIS). Radar-based sensors, particularly the Sentinel-1A vertical–vertical (S1A VV) polarization, outperform all other datasets in extracting lineaments, yielding 4883 lineaments that correspond to the regional geological faults. These lineaments trend in NE–SW, NNE–SSW, NW–SE, and E-W directions. The results also indicated that both digital elevation models (DEMs) were less effective, showing different orientations with azimuth angles. S1A VV proved to be highly effective in identifying subsurface fractured hard rock terrains beneath thin sedimentary covers, especially in the flat coastal area of Wadi Serimatai, where they intersected natural drainage pathways. Geoelectrical sections confirmed that there are orthogonal subsurface faults extending from fractured basement aquifers to near-surface layers. These faults align with the NE-SW and NNE-SSW directions observed in S1A VV lineaments. Geostatistical analysis revealed that S1A VV structural lineaments, lithological, and hydrogeological factors influence the occurrence of groundwater. This emphasizes the structural control over groundwater and its significant impact on water flow and storage. The study provides valuable insights for groundwater management, guiding decisions related to the development of groundwater resources.

Mesoproterozoic Strike-Slip Faulting within the Åland Rapakivi Batholith, Southwestern Finland

Paleostress inversion analysis of outcrop data from brittle fault structures within the Mesoproterozoic 1.58 Ga Åland rapakivi granite, southwestern Finland, revealed two separate strike-slip faulting stages. Stage 1 is dominated by dextral slip along E–W-trending faults under WNW–ESE to NNW–SSE compression, whereas Stage 2 displays less prominent faulting localized in an orthogonal network of N–S and E–W trending faults that developed under NE–SW compression. Relative age constraints indicate that faulting occurred between 1.58 and 0.5 Ga, and further correlation with previously published results indicate a 1.55–1.4 Ga age for Stage 1 faulting, while Stage 2 is compatible with previously described fault reactivations between 1.3–1.2 Ga. To place the results of the fault analyses in a wider framework, we conducted a regional structural interpretation using bathymetric, topographic, and geophysical datasets and reviewed previously published results. Based on the above, we attribute the emplacement of the 1.6–1.5 Ga rapakivi granites and the subsequent development of the Mesoproterozoic sedimentary basins to the reactivation of inherited Paleoproterozoic shear zones during Mesoproterozoic crustal extension. As such, this study contributes towards understanding the relationships between magmatism and strain localisation in continental (failed) rift settings.