Nature Of Cation Research Articles

Divergent Fe-Mediated C-H Activation Paths Driven by Alkali Cations.

The association of the ferrous complex FeIICl2(dmpe)2 (1) with alkali bases M(hmds) (M = Li, Na, K) proves to be an efficient platform for the activation of Ar-H bonds. Two mechanisms can be observed, leading to either Ar-FeII species by deprotonative ferration or hydrido species Ar-FeII-H by oxidative addition of transient Fe0(dmpe)2 generated by reduction of 1. Importantly, the nature of the alkali cation in M(hmds) has a strong influence on the preferred path. Starting from the same iron precursor, diverse catalytic applications can be explored by a simple modulation of the MI cation. Possible strategies enabling cross-coupling using arenes as pro-nucleophiles, reductive dehydrocoupling, or deuteration of B-H bonds are discussed.

Zeolite/Polymer Composites Prepared by Photopolymerization: Effect of Compensation Cations on Opacity and Gas Adsorption Applications.

The fabrication of structured zeolite adsorbents through photopolymerization-based 3D printing which offers a solution to the limitations of conventional shaping techniques has been demonstrated but many parameters still need to be optimized. In this study, we studied the influence of zeolite compensation cations on the photopolymerization and the composite's properties. Modified zeolites (LTA 4 A and FAU 13X exchanged with K+ , Li+ , Sr2+ , Ca2+ or Mg2+ ) were incorporated in PEGDA with BDMK as photoinitiator, and the formulation was cured under mild conditions (LED@405 nm, room temperature, under air). Our results indicate that the nature of zeolite compensation cations affects the colorimetric properties of polymer/zeolite composites: a better translucency parameter results in higher depth of cure. After calcination at 650 °C and complete removal of PEGDA, pure zeolitic monoliths were tested for adsorption of gas molecules of interest (carbon dioxide, dichlorobenzene and water). Structured 4 A and 13X monoliths obtained by 3D printing exhibit comparable adsorption capacity to commercial beads prepared from the same zeolites. This study enhances our understanding of the photopolymerization process involved in the production of polymer/zeolite composites. These composites are used in the fabrication of zeolitic objects through 3D printing, offering potential solutions to various environmental and dental challenges.

Kraft Lignin-Derived Microporous Nitrogen-Doped Carbon Adsorbent for Air and Water Purification.

The study presents a streamlined one-step process for producing highly porous, metal-free, N-doped activated carbon (N-AC) for CO2 capture and herbicide removal from simulated industrially polluted and real environmental systems. N-AC was prepared from kraft lignin─a carbon-rich and abundant byproduct of the pulp industry, using nitric acid as the activator and urea as the N-dopant. The reported carbonization process under a nitrogen atmosphere renders a product with a high yield of 30% even at high temperatures up to 800 °C. N-AC exhibited a substantial high N content (4-5%), the presence of aliphatic and phenolic OH groups, and a notable absence of carboxylic groups, as confirmed by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and Boehm's titration. Porosity analysis indicated that micropores constituted the majority of the pore structure, with 86% of pores having diameters less than 0.6 nm. According to BET adsorption analysis, the developed porous structure of N-AC boasted a substantial specific surface area of 1000 m2 g-1. N-AC proved to be a promising adsorbent for air and water purification. Specifically, N-AC exhibited a strong affinity for CO2, with an adsorption capacity of 1.4 mmol g-1 at 0.15 bar and 20 °C, and it demonstrated the highest selectivity over N2 from the simulated flue gas system (27.3 mmol g-1 for 15:85 v/v CO2/N2 at 20 °C) among all previously reported nitrogen-doped AC materials from kraft lignin. Moreover, N-AC displayed excellent reusability and efficient CO2 release, maintaining an adsorption capacity of 3.1 mmol g-1 (at 1 bar and 25 °C) over 10 consecutive adsorption-desorption cycles, confirming N-AC as a useful material for CO2 storage and utilization. The unique cationic nature of N-AC enhanced the adsorption of herbicides in neutral and weakly basic environments, which is relevant for real waters. It exhibited an impressive adsorption capacity for the herbicide 2,4-dichlorophenoxyacetic acid (2,4-D) at 96 ± 6 mg g-1 under pH 6 and 25 °C according to the Langmuir-Freundlich model. Notably, N-AC preserves its high adsorption capacity toward 2,4-D from simulated groundwater and runoff from tomato greenhouse, while performance in real samples from Fyris river in Uppsala, Sweden, causes a decrease of only 4-5%. Owing to the one-step process, high yield, annual abundance of kraft lignin, and use of environmentally friendly activating agents, N-AC has substantial potential for large-scale industrial applications.

Biomimetic Approach for Sustainable Magnetite Nanoparticle Synthesis Using Polycations

AbstractMagnetotactic bacteria produce magnetite nanoparticles called magnetosomes at ambient conditions via a protein‐stabilized transient amorphous precursor to obtain precise control over particle size and morphology. In a bioinspired approach, such biomineralization processes are emulated, mimicking proteins involved in magnetosome formation using the positively charged analog poly‐L‐arginine. While the additive is expensive, it remains elusive whether the change in magnetite formation mechanism arises solely from the polymer's cationic nature. This study uses different mass‐produced and sustainably sourced polycations to induce the biomineralization‐reminiscent formation of magnetite nanoparticles. These findings present how to achieve control over nanoparticle size (from 10 to 159 nm) and morphology (compact and sub‐structured) as well as magnetic properties (superparamagnetic, stable‐single‐domain, vortex state) at ambient temperature and pressure using these additives. Furthermore, the formation of large nanoparticles with the addition of poly(diallyldimethylammonium chloride) (PDADMAC) at low alkalinity highlights how magnetotactic bacteria may produce magnetite nanoparticles under similar conditions. Confirming the polycations' ability to electrostatic stabilize amorphous ferrihydrite, it is anticipated that parametric in vitro studies on polymer properties will provide valuable insights into magnetite biomineralization and aid in rationally designing magnetic nanomaterials.

Cellulose Functionalization Using N-Heterocyclic-Based Leaving Group Chemistry.

There has been continuous interest in developing novel activators that facilitate the functionalization of cellulosic materials. In this paper, we developed a strategy in which trisubstituted triazinium salts act as cellulose preactivators. As leaving groups, these triazinium salts utilize N-heterocycles (pyridine, imidazole, and nicotinic acid). Initially, we optimized the synthetic route for developing these novel cellulose preactivators (triazinium salts), whose structures were confirmed using NMR spectroscopy. The surface zeta potential of cellulose changed from a negative value to a positive one after preactivation due to the cationic nature of these preactivators. To enhance the scope of the study, we functionalized the cellulose-preactivated materials with a series of amine- or hydroxy-containing aliphatic and aromatic hydrocarbons, nucleophilic amino acids (cysteine), colorants (2-aminoanthraquinone and 2-amino-3-methyl-anthraquinone), and biopolymer (zein protein). The treated samples were analyzed using FTIR, time-gated Raman spectroscopy, and reflection spectroscopy, and the success of the functionalization process was validated. To widen the scope of such chemistries, we synthesized four reactive agents containing N-heterocyclic-based leaving groups (pyridine and nicotinic acid) and successfully functionalized cellulose with them in one step. The proposed single- and two-step functionalization approaches will provide opportunities for chemically linking various chemical compounds to cellulose for different applications.

New ionic mesogens with high ionic conductivity based on a cyanoborate building block and lipophilic or hydrophilic counter ions

Ionic liquid crystals based on immobilised, low nucleophilic cyanoborates are designed forming SmA bilayer phases with the lowest density in ionic sections leading to considerable ion conductivity values. Structural details vary with the cation nature.

Poly-beta-amino-ester licofelone conjugates development for osteoarthritis treatment.

Disease-modifying osteoarthritis drugs (DMOADs) are a new therapeutic class for osteoarthritis (OA) prevention or inhibition of the disease development. Unfortunately, none of the DMOADs have been clinically approved due to their poor therapeutic performances in clinical trials. The joint environment has played a role in this process by limiting the amount of drug effectively delivered as well as the time that the drug stays within the joint space. The current study aimed to improve the delivery of the DMOADs into cartilage tissue by increasing uptake and retention time of the DMOADs within the tissue. Licofelone was used a model DMOAD due to its significant therapeutic effect against OA progression as shown in the recent phase III clinical trial. For this purpose licofelone was covalently conjugated to the two different A16 and A87 poly-beta-amino-ester (PBAEs) polymers taking advantage of their hydrolysable, cytocompatible, and cationic nature. We have shown cartilage uptake of the licofelone-PBAE conjugates increased 18 times and retention in tissues was prolonged by 37 times compared to the equivalent dose of the free licofelone. Additionally, these licofelone conjugates showed no detrimental effect on the chondrocyte viability. In conclusion, the cationic A87 and A16 PBAE polymers increased the amount of licofelone within the cartilage, which could potentially enhance the therapeutic effect and pharmacokinetic performance of this drug and other DMOADs clinically.

Organic cations promote exciton dissociation in Ruddlesden-Popper lead iodide perovskites: a theoretical study.

Two-dimensional (2D) Ruddlesden-Popper perovskites (RPPs) are a class of quantum well (QW) materials showing large exciton binding energy owing to quantum confinement. The existence of localized edge states was proposed to accelerate exciton dissociation into long-lived charge carriers in 2D RPPs, but recent experimental reports suggested that highly efficient internal exciton dissociation is achievable in 2D RPPs despite the absence of edge states. Herein, we adopt first-principles calculations to unveil the physical origin of the high internal quantum efficiency in the bulk region of widely familiar (BA)2(MA)n-1PbnI3n+1 (BA = butylammonium; MA = methylammonium) materials. We discover that the dipolar nature of MA cations provides the driving force for the separation of photoexcited electron-hole pairs inside QWs as the inorganic layer thickens from n = 1 to n = 3. Concurrently, electronic coupling between organic spacer layers and QWs is enhanced in the energetically favorable configurations where MA cations orient with their CH3 groups towards the exterior PbI2 layers of QWs in the n = 3 structure. Consequently, hole delocalization is promoted along the out-of-plane direction of QWs, which in turn facilitates exciton dissociation into free charge carriers despite large exciton binding energy. Our simulations reveal that the hydrogen bonding between organic species (including both MA and BA cations) and iodine atoms, which is subtly interconnected, engineers the response of morphology in QWs and electronic interactions at organic-inorganic interfaces, providing novel insights for the exciton-free carrier behavior in the bulk area of 2D RPPs.

Unveiling the role of linear alkyl organic cations in 2D layered tin halide perovskite field-effect transistors.

Two-dimensional (2D) tin halide perovskites are promising semiconductors for field-effect transistors (FETs) owing to their fascinating electronic properties. However, the correlation between the chemical nature of organic cations and charge carrier transport is still far from understanding. In this study, the influence of chain length of linear alkyl ammonium cations on film morphology, crystallinity, and charge transport in 2D tin halide perovskites is investigated. The carbon chain lengths of the organic spacers vary from propylammonium to heptanammonium. The increase of alkyl chain length leads to enhanced local charge carrier transport in the perovskite film with mobilities of up to 8 cm2 V-1 s-1, as confirmed by optical-pump terahertz spectroscopy. A similar improved macroscopic charge transport is also observed in FETs, only to the chain length of HA, due to the synergistic enhancement of film morphology and molecular organization. While the mobility increases with the temperature rise from 100 K to 200 K due to the thermally activated transport mechanism, the device performance decreases in the temperature range of 200 K to 295 K because of ion migration. These results provide guidelines on rational design principles of organic spacer cations for 2D tin halide perovskites and contribute to other optoelectronic applications.

How the nature and charge of metal cations affect vibrations in acetone solvent molecules.

Vibrational spectra of a series of gas-phase metal 1+ and 2+ ions solvated by acetone molecules are collected to investigate how the metal charge, number of solvent molecules and nature of the metal affect the acetone. The spectra of Cu+(Ace)(N2)2, Cu+(Ace)4, and M2+(Ace)4, where M = Co, Ni, Cu, and Zn are measured via photodissociation by monitoring fragment ion signal as a function of IR wavenumber. The spectra show a red shift of the CO stretch and a blue shift of the C-C antisymmetric stretch. DFT calculations are carried out to provide the simulated spectra of possible isomers to be compared with the observed vibrational spectra, and specific structures are proposed. The red shift of the CO stretch increases as the number of acetone molecules decreases. Higher charge on the metal leads to a larger red shift in the CO stretch. Although all of the M2+ complexes have very similar red shifts, they are predicted to have different geometries due to their different electron configurations. Unexpectedly, we find that the calculated red shift in the CO stretch in M+/2+(Ace) is highly linearly correlated with the ionization energy of the metal for a wide range of metal cations and dications.

Fabrication of thiosemicarbazone-based Pd(II) complexes: structural elucidations, catalytic activity towards Suzuki-Miyaura coupling reaction and antitumor activity against TNBC cells.

Currently, there are many uses of metal complexes, especially in the fields of medicinal chemistry and catalysis. Thus, fabrication of new complexes which perform as a catalyst and chemotherapeutic drug is always a beneficial addition to the literature. Herein, we report three heterocyclic thiosemicarbazone-based Pd(II) complexes [Pd(HL1)Cl] (C1), [Pd(L2)(PPh3)] (C2) and [Pd(L3)(PPh3)]Cl (C3) having coligands Cl and PPh3. Thiosemicarbazone ligands (H2L1, H2L2 and HL3) and the complexes (C1-C3) were characterized methodically using several spectroscopic techniques. Single-crystal X-ray diffraction methods reveal that the structural environment around the metal center of C2 is square planar, while for C1 and C3 it is a slighty distorted square plane. The supramolecular network of compounds was built via hydrogen bonds, C-H⋯π and π⋯π interactions. Density functional theory (DFT) study of the structure of the complexes supports experimental findings. The application of these complexes as catalysts toward Suzuki-Miyaura coupling reactions has been examined with various aryl halides and phenyl boronic acid in PEG 400 solvent. The complexes displayed good biomolecular interactions with DNA/protein, with a binding constant value of the order of 105 M-1. C3 showed greater binding efficacy toward these biomolecules than the other complexes, which might be due to the cationic nature of C3. Furthermore, antitumor activity of the complexes was studied against the human triple-negative breast cancer (TNBC) cell line MDA-MB-231. It was found that C3 was more toxic (IC50 = 10 ± 2.90 μM) toward MDA-MB-231 cells than the other complexes. A known chemotherapeutic drug, 5-fluorouracil, was included as positive control. The programmed cell death mechanism of C3 was confirmed. Additionally, complex-induced apoptosis was confirmed and occurred via a mitochondria-dependent (intrinsic) pathway.

Biomimetic noncationic lipid nanoparticles for mRNA delivery.

Although the tremendous progress has been made for mRNA delivery based on classical cationic carriers, the excess cationic charge density of lipids was necessary to compress mRNA through electrostatic interaction, and with it comes inevitably adverse events including the highly inflammatory and cytotoxic effects. How to develop the disruptive technologies to overcome cationic nature of lipids remains a major challenge for safe and efficient mRNA delivery. Here, we prepared noncationic thiourea lipids nanoparticles (NC-TNP) to compress mRNA by strong hydrogen bonds interaction between thiourea groups of NC-TNP and the phosphate groups of mRNA, abandoning the hidebound and traditional electrostatic force to construct mRNA-cationic lipids formulation. NC-TNP was a delivery system for mRNA with simple, convenient, and repeatable preparation technology and showed negligible inflammatory and cytotoxicity side effects. Furthermore, we found that NC-TNP could escape the recycling pathway to inhibit the egress of internalized nanoparticles from the intracellular compartment to the extracellular milieu which was a common fact in mRNA-LNP (lipid nanoparticles) formulation. Therefore, NC-TNP-encapsulated mRNA showed higher gene transfection efficiency in vitro and in vivo than mRNA-LNP formulation. Unexpectedly, NC-TNP showed spleen targeting delivery ability with higher accumulation ratio (spleen/liver), compared with traditional LNP. Spleen-targeting NC-TNP with mRNA exhibited high mRNA-encoded antigen expression in spleen and elicited robust immune responses. Overall, our work establishes a proof of concept for the construction of a noncationic system for mRNA delivery with good inflammatory safety profiles, high gene transfection efficiency, and spleen-targeting delivery to induce permanent and robust humoral and cell-mediated immunity for disease treatments.

Air- and photo-stable luminescent carbodicarbene-azaboraacenium ions.

Substitution of a C=C bond by an isoelectronic B-N bond is a well-established strategy to alter the electronic structure and stability of acenes. BN-substituted acenes that possess narrow energy gaps have attractive optoelectronic properties. However, they are susceptible to air and/or light. Here we present the design, synthesis and molecular structures of fully π-conjugated cationic BN-doped acenes stabilized by carbodicarbene ligands. They are luminescent in the solution and solid states and show high air and moisture stability. Compared with their neutral BN-substituted counterparts as well as the parent all-carbon acenes, these species display improved quantum yields and small optical gaps. The electronic structures of the azabora-anthracene and azabora-tetracene cations resemble higher-order acenes while possessing high photo-oxidative resistance. Investigations using density functional theory suggest that the stability and photo-physics of these conjugated systems may be ascribed to their cationic nature and the electronic properties of the carbodicarbene.

Amphiphilic polylactic acid-b-poly(N-(3-aminopropyl) methacrylamide) copolymers: Self-assembly to polymeric micelles for gene delivery

In this study, for the first time diblock copolymers of PLA-b-PAPMA with three different sizes were synthesized in order to fabricate cationic micelles. In this copolymer, p(APMA) block with hydrophilic cationic nature could serve as a nucleic acid condensation platform as well as the shell of micellar structure in the self-assembly process. The p(APMA) block was electrostatically complexed with nucleic acid, and formed a neutral or mildly positive charge micellar surface, thus providing the nanoparticles safety and stability. On the other hand, polylactic acid as a hydrophobic polymer in diblock copolymer structure formed core of micelles which could encapsulate hydrophobic therapeutics. The synthesized copolymers, PLA74-b-PAPMA14, PLA121-b-PAPMA22, PLA121-b-PAPMA103 were evaluated in terms of self-assembly capability, size, polydispersity index, plasmid condensation, transfection efficacy and cytotoxicity against C26 cells. Obtained results demonstrated low CMC values for all copolymers. PLA121-b-PAPMA103 diblock copolymer condensed green fluorescent protein plasmid at C/P 1 and higher, while other diblock copolymers were able to condense plasmid above C/P 70. The self-assembly structures of cationic micelles before and after plasmid condensation showed spherical morphology in SEM analysis while DLS data illustrated appropriate size (161.7 ± 8) and PDI (0.276) for PLA121-b-PAPMA103 diblock copolymer. It could be concluded that the cationic micelles with approximately the molecular weight ratio of hydrophilic block to total polymer mass of 60 % and larger than 50 % provided higher stability, condensation ability and transfection efficiency which could be attributed to the better self-assembly process and better amine groups exposure on the micellar surface.

AGE CHARACTERISTICS OF CHANGES IN THE LYMPHOID POPULATION STRUCTURE OF THE RATS’ THYMUS AFTER ACUTE DISTURBANCE OF CEREBRAL BLOOD FLOW IN THE BASIN OF CAROTID ARTERIES

Abstract. Today, the most common causes of disability and mortality on the planet include acute disorders of cerebral blood circulation, the spectrum of which is dominated by ischemic lesions. Advances in neuroimmunology and neuroimmunopathology have made it possible to attribute cerebral blood circulation disorders to immune- dependent diseases of the nervous system, therefore, the emphasis in the search of new approaches to the eff ectiveness increase of stroke therapy has shifted from the correction of local changes in the brain itself to the reaction of the immune system organs, as a possible target of pharmacological eff ects, that will make it possible to reduce the secondary death of neurons as a result of infl ammation.The purpose of the work. to investigate the age-specifi c changes in the structure of the lymphoid population of the thymus after acute disruption of cerebral blood fl ow in the basin of the carotid arteries in six- and ninemonth-old rats.Material and methods. Acute cerebrovascular accident was simulated in 6- and 9-month-old white nonlinear laboratory rats by bilateral carotid artery clamping for 20 min. followed by reperfusion. The thymus was taken on the 12th day of the postischemic period, it was fi xed in Buen’s solution, after standard histological processing, serial sections with a thickness of 5 μm were made, stained with hematoxylin- eosin. In the subcapsular, deep cortical zones, intralobular perivascular spaces and the medullary zone of the thymus, the structure of the lymphoid population (density of diff erent classes of thymocytes per 1 mm2) was studied in the digital image analysis system VIDAS-386 (Kontron Electronik, Germany) with a fl uorescent microscope AXIOSKOP (Zeiss, Germany) in automatic mode.The results. In the structure of the lymphoid population of all structural and functional zones of the thymus, small lymphocytes predominate. Age-related diff erences in the structure of the lymphoid population of the thymus of the control groups consist of lower indicators of the density of medium and small thymocytes in all investigated zones of the gland of animals of the older age group, with the exception of the subcapsular, in which the density of small thymocytes is higher in nine-month-old rats. On the 12th day after simulation of ischemia- reperfusion of the brain injury the number of destructive thymocytes and thymocytes with the signs of apoptosis increases in the subcapsular and deep cortical zones of the thymus of six-month-old rats, but in nine-month-old rats in all zones of the gland, except the brain, the density of destructive and apoptotic cells decreases.Conclusions. Ischemic- reperfusion injury of the brain modifi es the structure of the lymphoid population of the thymus of rats, and the nature of these modifi cations is determined by age and structural and functional zones of the gland.

Repurposing phenothiazines for cancer therapy: compromising membrane integrity in cancer cells

The limitations of current cancer therapies, including the increasing prevalence of multidrug resistance, underscore the urgency for more effective treatments. One promising avenue lies in the repurposing of existing drugs. This review explores the impact of phenothiazines, primarily used as antipsychotic agents, on key mechanisms driving tumor growth and metastasis. The cationic and amphiphilic nature of phenothiazines allows interaction with the lipid bilayer of cellular membranes, resulting in alterations in lipid composition, modulation of calcium channels, fluidity, thinning, and integrity of the plasma membrane. This is especially significant in the setting of increased metabolic activity, a higher proliferative rate, and the invasiveness of cancer cells, which often rely on plasma membrane repair. Therefore, properties of phenothiazines such as compromising plasma membrane integrity and repair, disturbing calcium regulation, inducing cytosolic K-RAS accumulation, and sphingomyelin accumulation in the plasma membrane might counteract multidrug resistance by sensitizing cancer cells to membrane damage and chemotherapy. This review outlines a comprehensive overview of the mechanisms driving the anticancer activities of phenothiazines derivates such as trifluoperazine, prochlorperazine, chlorpromazine, promethazine, thioridazine, and fluphenazine. The repurposing potential of phenothiazines paves the way for novel approaches to improve future cancer treatment.

Bio-functionalized nanocolloids of ZnS quantum dot/amine-rich polypeptides for bioimaging cancer cells with antibacterial activity: "seeing is believing".

Among almost 200 types of cancers, glioma is considered one of the most common forms of malignant tumors located in the central nervous system (CNS). Glioblastoma (GBM), one of the deadliest types of brain cancer, remains one of the challenges faced by oncologists. Thus, smartly designed nanomaterials biofunctionalized with polypeptides can offer disruptive strategies relying on the earliest possible diagnosis ("seeing is believing") combined with more efficient therapies for fighting cancer cells. To worsen this scenario, bacteria infections very often pose a serious challenge to cancer-immunodeficient patients under chemotherapy. Thus, in this research, we report for the first time the design and synthesis of novel nanoconjugates composed of photoluminescent ZnS quantum dots (ZnS QDs), which were directly surface biofunctionalized with epsilon-poly-l-lysine (εPL), acting as an amine-rich cell-penetrating peptide (CPP) and antimicrobial peptide agent (AMP). These nanoconjugates (named ZnS@CPP-AMP) were produced through a one-step facile, eco-friendly, and biocompatible colloidal aqueous process to be applied as a proof of concept as nanoprobes for bioimaging GBM cancer cells (U87-MG) associated with synergic antibacterial activity. They were characterized regarding their physicochemical and optical properties associated with the biological activity. The results demonstrated that chemically stable aqueous colloidal nanoconjugates were effectively formed, resembling core-shell (inorganic, ZnS, organic, εPL) nanostructures with positively surface-charged features due to the cationic nature of the amine-rich polypeptide. More importantly, they demonstrated photoluminescent activity, cytocompatibility in vitro, and no significant intracellular reactive oxygen species (ROS) generation. These ZnS@CPP-AMP nanocolloids behaved as fluorescent nanoprobes for bioimaging GBM cancer cells, where the polycationic nature of the εPL biomolecule may have enhanced the cellular uptake. Additionally, they displayed mild antibacterial growth inhibition due to electrostatic interactions with bacterial membranes. Thus, it can be envisioned that these novel photoluminescent colloidal nanoconjugates offer novel nanoplatforms that can be specifically targeted with biomolecules for bioimaging to diagnose highly lethal cancers, such as GBM, and as an adjuvant in antibacterial therapy.

Dipicolylamine-Zn Induced Targeting and Photo-Eliminating of Pseudomonas aeruginosa and Drug-Resistance Gram-Positive Bacteria.

The emergence of drug-resistant bacteria, particularly resistant strains of Gram-negative bacteria, such as Pseudomonas aeruginosa, poses a significant threat to public health. Although antibacterial photodynamic therapy (APDT) is a promising strategy for combating drug-resistant bacteria, actively targeted photosensitizers (PSs) remain unknown. In this study, a PS based on dipicolylamine (DPA), known as WZK-DPA-Zn, is designed for the selective identification of P. aeruginosa and drug-resistant Gram-positive bacteria. WZK-DPA-Zn exploits the synergistic effects of DPA-Zn2+ coordination and cellular uptake, which could effectively anchor P. aeruginosa within a brief period (10min) without interference from other Gram-negative bacteria. Simultaneously, the cationic nature of WZK-DPA-Zn enhances its interaction with Gram-positive bacteria via electrostatic forces. Compared to traditional clinical antibiotics, WZK-DPA-Zn shows exceptional antibacterial activity without inducing drug resistance. This effectiveness is achieved using the APDT strategy when irradiated with white light or sunlight. The combination of WZK-DPA-Zn with Pluronic-based thermosensitive hydrogel dressings (WZK-DPA-Zn@Gel) effectively eliminates mixed bacterial infections and accelerates wound healing, thereby achieving a synergistic effect where "1+1>2." In summary, this study proposes a precise strategy employing DPA-Zn as the targeting moiety of a PS, facilitating the rapid elimination of P. aeruginosa and drug-resistant Gram-positive bacteria using APDT.

Advances in Transdermal Delivery of Antimicrobial Peptides for Wound Management: Biomaterial-Based Approaches and Future Perspectives.

Antimicrobial peptides (AMPs), distinguished by their cationic and amphiphilic nature, represent a critical frontier in the battle against antimicrobial resistance due to their potent antimicrobial activity and a broad spectrum of action. However, the clinical translation of AMPs faces hurdles, including their susceptibility to degradation, limited bioavailability, and the need for targeted delivery. Transdermal delivery has immense potential for optimizing AMP administration for wound management. Leveraging the skin's accessibility and barrier properties, transdermal delivery offers a noninvasive approach that can circumvent systemic side effects and ensure sustained release. Biomaterial-based delivery systems, encompassing nanofibers, hydrogels, nanoparticles, and liposomes, have emerged as key players in enhancing the efficacy of transdermal AMP delivery. These biomaterial carriers not only shield AMPs from enzymatic degradation but also provide controlled release mechanisms, thereby elevating stability and bioavailability. The synergistic interaction between the transdermal approach and biomaterial-facilitated formulations presents a promising strategy to overcome the multifaceted challenges associated with AMP delivery. Integrating advanced technologies and personalized medicine, this convergence allows the reimagining of wound care. This review amalgamates insights to propose a pathway where AMPs, transdermal delivery, and biomaterial innovation harmonize for effective wound management.

Self-Entrapment of Antimicrobial Peptides in Silica Particles for Stable and Effective Antimicrobial Peptide Delivery System.

Antimicrobial peptides (AMPs) have emerged as a promising solution to tackle bacterial infections and combat antibiotic resistance. However, their vulnerability to protease degradation and toxicity towards mammalian cells has hindered their clinical application. To overcome these challenges, our study aims to develop a method to enhance the stability and safety of AMPs applicable to effective drug-device combination products. The KR12 antimicrobial peptide was chosen, and in order to further enhance its delivery and efficacy the human immunodeficiency virus TAT protein-derived cell-penetrating peptide (CPP) was fused to form CPP-KR12. A new product, CPP-KR12@Si, was developed by forming silica particles with self-entrapped CPP-KR12 peptide using biomimetic silica precipitability because of its cationic nature. Peptide delivery from CPP-KR12@Si to bacteria and cells was observed at a slightly delivered rate, with improved stability against trypsin treatment and a reduction in cytotoxicity compared to CPP-KR12. Finally, the antimicrobial potential of the CPP-KR12@Si/bone graft substitute (BGS) combination product was demonstrated. CPP-KR12 is coated in the form of submicron-sized particles on the surface of the BGS. Self-entrapped AMP in silica nanoparticles is a safe and effective AMP delivery method that will be useful for developing a drug-device combination product for tissue regeneration.