Natural Bond Research Articles

Screening and Antiscreening Effects in Endohedral Nanotubes.

Recently we investigated from first-principles screening properties in systems where small molecules, characterized by a finite electronic dipole moment, are encapsulated in different nanocages. The most relevant result was the observation of an antiscreening effect in alkali-halide nanocages characterized by ionic bonds: in fact, due to the relative displacement of positive and negative ions, induced by the dipole moment of the encapsulated molecule, these cages act as dipole-field amplifiers, different from what is observed in carbon fullerene nanocages, which exhibit instead a pronounced screening effect. Here we extend the study to another class of nanostructures: the nanotubes. Using first-principles techniques based on density functional theory, we studied the properties of endohedral nanotubes obtained by encapsulation of a water molecule or a linear HF molecule. A detailed analysis of the effective dipole moment of the complexes and of the electronic charge distribution suggests that screening effects crucially depend not only on the nature of the intramolecular bonds but also on the size and the shape of the nanotubes and on the specific encapsulated molecule. As observed in endohedral nanocages, screening is maximum in covalent-bond carbon nanotubes, while it is reduced in partially ionic nanotubes, and an antiscreening effect is observed in some ionic nanotubes. However, in this case, the scenario is more complex than in corresponding ionic nanocages. In fact the specific geometric structure of alkali-halide nanotubes turns out to be crucial for determining the screening/antiscreening behavior: while nanotubes with octagonal transversal section can exhibit an antiscreening effect, which quantitatively depends on the number of layers in the longitudinal direction, instead nanotubes with dodecagonal section are always characterized by a reduction of the total dipole moment so that a screening behavior is observed. Our results show that, even in nanotube structures, in principle one can tune the dipole moment and generate electrostatic fields at the nanoscale without the aid of external potentials.

Spider Silk-Inspired Hyaluronic Acid-Based Hydrogels with Superior Self-Healing Capability and Enhanced Strength.

Hyaluronic acid hydrogels are promising materials for diverse applications, yet their potential is hampered by limitations such as low self-healing efficiency and insufficient mechanical strength. Inspired by the heterogeneous structures of spider silk, we introduce a novel dual dynamically crosslinked network hydrogel. This hydrogel comprises an acylhydrazone-crosslinked network, utilizing aldehyde hyaluronic acid (AHA) and 3,3'-dithiobis (propionohydrazide) (DTP) as a first network, and a secondary network formed by hydrogen bonds-crosslinked network between tannic acid (TA) and silk fibroin (SF) with β-sheet formation. The hydrogel exhibits exceptional self-healing ability due to the dynamic and reversible nature of Schiff base bonds, disulfide bonds, and hydrogen bonds, achieving complete healing within 5 minutes. Additionally, the spider silk-inspired heterogeneous structures enhance mechanical properties. Furthermore, the incorporation of TA provides enhanced adhesion, as well as remarkable antibacterial and antioxidant properties. This innovative hyaluronic acid-based hydrogel, inspired by spider silk, offers a promising avenue to fortify both the mechanical strength and self-healing capabilities of hydrogels, thus expanding opportunities for applications in tissue engineering and biomedicine.

Photopolymerization initiated by p-diethylene glycol monomethyl ether cinnamyl formamide-based disulfide under 455 nm LED with minimized volume shrinkage

This study introduces a novel p-diethylene glycol monomethyl ether cinnamyl formamide-based disulfide monomer, N,N′-(disulfanediylbis(2,1-phenylene)) bis(4-(4-(2-(2-methoxyethoxy)ethoxy) phenyl)-2-oxobut-3-enamide) (Mp-BSCF), designed to reduce the volume shrinkage of photosensitive resins and initiate monomer polymerization under 455 nm LED light irradiation. The photochemical properties and photoinitiation efficiency of Mp-BSCF are systematically investigated using UV–vis absorption spectroscopy, electron paramagnetic resonance (EPR) and real-time infrared spectroscopy. Although its weak absorption around 455 nm, Mp-BSCF can generate arylthiyl radicals under 455 nm LED irradiation, and then effectively initiate the polymerization of triethylene glycol dimethacrylate (TEGDMA)/A glycerolate dimethacrylate (Bis-GMA) system. Increasing Mp-BSCF addition enhances the final double bond conversion and maximum polymerization rate of the TEGDMA/Bis-GMA system, reaching up to 82.0 % and 2.02 % s−1, respectively. Notably, Mp-BSCF significantly reduces the volume shrinkage of the photopolymerization system, with the addition of 10 % Mp-BSCF resulting in a 50 % reduction compared to the control system. This reduction is attributed to the dynamic reversible nature of the SS bond “breaking-recovery” and the intermolecular hydrogen bond interaction. Additionally, Mp-BSCF improves the thermal stability, friction resistance, and hardness of the TEGDMA/Bis-GMA photopolymerization system.

The Rivalry between Intramolecular Tetrel Bonds and Intermolecular Hydrogen Bonds in (O-Si) Chelates of N-Silylmethylamides and -ureas. A Theoretical Study.

The comparison of the results of theoretical calculations of (O-Si) chelates of N-silylmethylated amides and ureas with the axial chlorine or fluorine atom at silicon to the data of X-ray analysis of related compounds revealed the formation of covalent O-Si tetrel bonds (TB) or noncovalent O⋅⋅⋅Si tetrel bonds (NTB). The nature of the formed tetrel bond depends on the substituents at silicon and the polarity of the medium. The competition between the intramolecular TB and intermolecular hydrogen bonds (HB) with proton donors depends on the center of basicity involved in the formation of HB, which could be either oxygen or halogen. The hydrogen bonding can result in changing the nature of the tetrel bonds from covalent to noncovalent and vice versa by varying their lengths and energies. The O-Si bond energies estimated by QTAIM analysis of N-[(chlorodimethylsilyl)methyl]-N-methylacetamide and its H-complexes vary within the range of 7.2 and 12 kcal/mol in gas and solution, respectively, and correlate with the O-Si bond lengths.

Synthesis and in vitro bioactivity of sodium metasilicate-derived silicon-substituted hydroxyapatite

Structural alteration of synthetic implants aims to achieve better bioactivity, higher cellular response, and regulated degradability, all of which are critical criteria for a biomaterial to serve as a graft in bone regeneration. The aim of this work was to synthesize silicon-substituted hydroxyapatite and test its bioactivity in simulated body fluid (SBF) by proving the use of sodium metasilicate (Na2SiO3.9H2O) as an affordable precursor of silica. Thus, the study evaluated the in vitro bone-bonding capacity of hydroxyapatite (Ca10(PO4)6(OH)2) (HA) substituted with silicate ion (Ca10(PO4)6-x(SiO4)x(OH)2-x; SixHA). The SixHA with x = 0.4 was synthesized by utilizing a wet precipitation method with sodium metasilicate as a low-cost silica alternative for alkoxysilane precursors. The SixHA was then examined for properties such as morphology, elemental composition, phase composition, and the nature of chemical bonds using scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), X-ray diffractometry (XRD), and Fourier transformed infrared spectroscopy (FTIR), respectively. An in vitro bioactivity experiment was also carried out by incubating the SixHA in simulated body fluid (SBF) at 36.5 °C for 7 and 14 days. The obtained results revealed the substitution of SiO44- for some PO43- groups in the hydroxyapatite structure. The SixHA nucleated more apatite crystals on its surface and demonstrated some degradability during the periods of immersion in SBF. The characteristics of the SixHA imply that it could be used as a graft in bone restoration applications, thus signifying that sodium metasilicate could serve as an economic silica source for silicon-substituted hydroxyapatite production.

Overview of Dynamic Bond Based Hydrogels for Reversible Adhesion Processes.

Polymeric hydrogels are soft materials with a three-dimensional (3D) hydrophilic network capable of retaining and absorbing large amounts of water or biological fluids. Due to their customizable properties, these materials are extensively studied for developing matrices for 3D cell culture scaffolds, drug delivery systems, and tissue engineering. However, conventional hydrogels still exhibit many drawbacks; thus, significant efforts have been directed towards developing dynamic hydrogels that draw inspiration from organisms' natural self-repair abilities after injury. The self-healing properties of these hydrogels are closely associated with their ability to form, break, and heal dynamic bonds in response to various stimuli. The primary objective of this review is to provide a comprehensive overview of dynamic hydrogels by examining the types of chemical bonds associated with them and the biopolymers utilized, and to elucidate the chemical nature of dynamic bonds that enable the modulation of hydrogels' properties. While dynamic bonds ensure the self-healing behavior of hydrogels, they do not inherently confer adhesive properties. Therefore, we also highlight emerging approaches that enable dynamic hydrogels to acquire adhesive properties.

Controlled dissolution of physically cross-linked locust bean gum – κ-carrageenan hydrogels

Most hydrogels swell but do not dissolve in water since their chains are tied to each other. Nevertheless, some hydrogels disintegrate under physiological conditions, a property that could be beneficial in emerging applications, including sacrificial materials, 3D bioprinting, and wound dressings. This paper proposes a novel approach to control the dissolution rate of hydrogels based on the integration of kappa carrageenan nanoparticles (KCAR-NPs) into kappa carrageenan (KCAR) and locust bean gum (LBG) hydrogels to obtain a three-component hybrid system. KCAR and LBG are known to have synergistic interactions, where physical interactions and chain entanglements lead to their gelation. We hypothesized that integrating the bulky nanoparticles would disturb the three-dimensional network formed by the polysaccharide chains and enable manipulating the dissolution rate. Compression, water absorption, rheology, and cryo-scanning electron microscopy measurements were performed to characterize the physical properties and structure of the hydrogels. The hybrid hydrogels displayed much faster dissolution rates than a control system without nanoparticles, which did not completely dissolve within 50 days and offered a cutting-edge means to finely adjust hydrogel dissolution through modulation of KCAR and KCAR-NPs concentrations. The new hydrogels also exhibited shear-thinning and self-healing properties resulting from the weak and reversible nature of the physical bonds.

Exploring the influence of metal cations on individual hydrogen bonds in Watson-Crick guanine-cytosine DNA base pair: An interacting quantum atoms analysis.

This study delves into the nature of individual hydrogen bonds and the relationship between metal cations and hydrogen bonding in the Watson-Crick guanine-cytosine (GC) base pair and its alkali and alkaline earth cation-containing complexes (Mn+-GC). The findings reveal how metal cations affect the nature and strength of individual hydrogen bonds. The study employs interacting quantum atoms (IQA) analysis to comprehensively understand three individual hydrogen bonds within the GC base pair and its cationic derivatives. These analyses unveil the nature and strength of hydrogen bonds and serve as a valuable reference for exploring the impact of cations (and other factors) on each hydrogen bond. All the H D interactions (H is hydrogen and D is oxygen or nitrogen) in the GC base pair are primarily electrostatic in nature, with the charge transfer component playing a substantial role. Introducing a metal cation perturbs all H D interatomic interactions in the system, weakening the nearest hydrogen bond to the cation (indicated by a) and reinforcing the other (b and c) interactions. Notably, the interaction a, the strongest H D interaction in the GC base pair, becomes the weakest in the Mn+-GC complexes. A broader perspective on the stability of GC and Mn+-GC complexes is provided through interacting quantum fragments (IQF) analysis. This approach considers all pairwise interactions between fragments and intra-fragment components, offering a complete view of the factors that stabilize and destabilize GC and Mn+-GC complexes. The IQF analysis underscores the importance of electron sharing, with the dominant contribution arising from the inter-fragment exchange-correlation term, in shaping and sustaining GC and Mn+-GC complexes. From this point of view, alkaline and alkaline earth cations have distinct effects, with alkaline cations generally weakening inter-fragment interactions and alkaline earth cations strengthening them. In addition, IQA and IQF calculations demonstrate that the hydration of cations led to small changes in the hydrogen bonding network. Finally, the IQA interatomic energies associated with the hydrogen bonds and also inter-fragment interaction energies provide robust indicators for characterizing hydrogen bonds and complex stability, showing a strong correlation with total interaction energies.

Inverse Vulcanization of Activated Norbornenyl Esters-A Versatile Platform for Functional Sulfur Polymers.

Elemental sulfur has shown to be a promising alternative feedstock for development of novel polymeric materials with high sulfur content. However, the utilization of inverse vulcanized polymers is restricted by the limitation of functional comonomers suitable for an inverse vulcanization. Control over properties and structure of inverse vulcanized polymers still poses a challenge to current research due to the dynamic nature of sulfur-sulfur bonds and high temperature of inverse vulcanization reactions. In here, we report for the first time the inverse vulcanization of norbornenyl pentafluorophenyl ester (NB-PFPE), allowing for post-modification of inverse vulcanized polymers via amidation of reactive PFP esters to yield high sulfur content polymers under mild conditions. Amidation of the precursor material with three functional primary amines (α-amino-ω-methoxy polyethylene glycol, aminopropyl trimethoxy silane, allylamine) was investigated. The resulting materials were applicable as sulfur containing poly(ethylene glycol) nanoparticles in aqueous environment. Cross-linked mercury adsorbents, sulfur surface coatings, and high-sulfur content networks with predictable thermal properties were achievable using aminopropyl trimethoxy silane and allylamine for post-polymerization modification, respectively. With the broad range of different amines available and applicable for post-polymerization modification, the versatility of poly(sulfur-random-NB-PFPE) as a platform precursor polymer for novel specialized sulfur containing materials was showcased.

Stress-induced intersecting stacking faults and shear antiphase boundary in Zr5Ge4 second phase precipitate embedded in Ge-modified Zircaloy-4

Secondary phase precipitates are vital to control mechanical, corrosion and irradiation response of the multiphase alloy systems. This work reports the mechanical response of an ordered complex intermetallic Zr5Ge4 precipitate during hot working of the experimental Zircaloy-4 modified with dilute Ge addition. Atomic scale insight is provided into the formation mechanism of straight and circular stacking faults and shear antiphase boundary in Zr5Ge4 precipitate. Two types of stacking faults, having displacement vectors 1/3[100] and 1/3[110] with small components along the c-axis, come across and form a distinct region on the (001) surface composed of a zigzag atomic arrangement different from the parent crystal. Besides this, a shear antiphase boundary along the Zr5Ge4/fcc-Zr interface is analysed and concomitant generation of nanotwins is evidenced by the streaking effect in the associated fast Fourier transform (FFT) pattern. By analysing the distortion and stacking faults in the surrounding fcc-Zr phase, comments are made on the role of external stresses in generating the aforementioned planar defects. The relative activity of two types of displacement vectors observed in Zr5Ge4 precipitate is discussed on the basis of the nature of the atomic bond.

Exploring the Nature of Chemical Bonding between Noble Gases and Hypercoordinate Group 13 Compounds: Beyond Boron.

In this article, we systematically study the stability and chemical bond nature of EH4Ng+ compounds (E = Al-Tl; Ng = He-Rn) at the CCSD(T) and ωB97XD levels of theory. Thermochemical calculations obtained by exploring different dissociation pathways show that these compounds could be stable at low temperatures. In addition, studied compounds have a strong E-Ng bond, which has been characterized using different methodologies such as quantum theory of atoms in molecules (QTAIM), natural bond orbital (NBO) theory, and natural energy decomposition analysis (NEDA). Results indicate that the nature of the chemical bond is predominantly covalent, especially in the case those including the heavier gases (Ar-Rn), occurring through a charge transfer from the noble gas to the group 13 element. However, the electrostatic contribution is also important in the stabilization of this bond. This study extends the universe of group 13 molecules containing noble gas bonds beyond boron and other elements from the second period.

Diffusion‐induced phase separation 3D printed scaffolds for dynamic tissue repair

AbstractMany hydrogen‐bonded cross‐linked hydrogels possess unique properties, but their limited processability hinders their potential applications. By incorporating a hydrogen bond dissociator (HBD) into these hydrogels, we developed injectable 3D printing inks termed diffusion‐induced phase separation (DIPS) 3D printing inks. Upon extrusion into water and subsequent diffusion of HBD, these ink cure rapidly. The DIPS‐printed scaffold retained most of the original hydrogel properties due to the regeneration of hydrogen bonds. Additionally, the reversible nature of hydrogen bonds provides DIPS 3D‐printed scaffolds with exceptional recycling and reprinting capabilities, resulting in a reduction in the waste of valuable raw ink materials or additives. Postprocessing introduces new crosslinking methods that modulate the mechanical properties and degradation characteristics of DIPS scaffolds over a broad range. Based on its suitable mechanical properties and bioactivity, we successfully repaired and functionally reconstructed a complex defect in penile erectile tissue using the DIPS scaffold in a rabbit model. In summary, this approach is relevant for various hydrogen‐bonded cross‐linked hydrogels that offer mild printing conditions and enable the incorporation of bioactive agents. They can be used as scaffolds for dynamic tissue reconstruction, wearable devices, or soft robots.

Investigating Temperature-Dependent Microscopic Deformation in Tough and Self-Healing Hydrogel Using Time-Resolved USAXS.

Tough and self-healing hydrogels are typically sensitive to loading rates or temperatures due to the dynamic nature of noncovalent bonds. Understanding the structure evolution under varying loading conditions can provide valuable insights for developing new tough soft materials. In this study, polyampholyte (PA) hydrogel with a hierarchical structure is used as a model system. The evolution of the microscopic structure during loading is investigated under varied loading temperatures. By combining ultra-small angle X-ray scattering (USAXS) and Mooney-Rivlin analysis, it is elucidated that the deformation of bicontinuous hard/soft phase networks is closely correlated with the relaxation dynamics or strength of noncovalent bonds. At high loading temperatures, the gel is soft and ductile, and large affine deformation of the phase-separated networks is observed, correlated with the fast relaxation dynamics of noncovalent bonds. At low loading temperatures, the gel is stiff, and nonaffine deformation occurs from the onset of loading due to the substantial breaking of noncovalent bonds and limited chain mobility as well as weak adaptation of phase deformation to external stretch. This work provides an in-depth understanding of the relationship between structure and performance of tough and self-healing hydrogels.

Self-associates of 1,2,4-triazole: FTIR studies, quantum chemical calculations and topological analysis

The Fourier Transform Infrared (FTIR) spectroscopic technique has been employed to study the self-associates of 1,2,4-triazole (Htrz) in solid phase. The self-associates have been identified using density functional theory (DFT) calculations carried out on various multimers of Htrz under B3LYP/6–311++ G(d, p) level. Comparison of the experimental and theoretical frequencies of N−H andC−Hstretching absorptional bands indicate that Htrz exists as multimers upto hexamer. The Occupancy of the anti-bonding orbitals of the proton donors, Natural bond Orbital (NBO), Frontier Molecular Orbital (FMO), Electrostatic potential surface (ESP), reduced density gradient (RDG) analyses have also been executed. In addition, topological parameters have also been analysed to characterize the hydrogen bonds and proton donating covalent bonds. The analyses show that pentamer is the most stable among all the H-bonded associates and the dimer 3 in which classical and non-classical H-bond interaction coexists is the least stable. The topological parameter values suggest that the N−H bonds of dimer1/pentamer are with the highest/smallest covalent character. The criteria proposed in literature to describe the covalent nature of bonds, in particular proton donor bonds, appears to fails in the Htrz dimer in which classical and non-classical hydrogen bonds coexist.

Synthesis of polyethylene-based covalent adaptable networks including 1,2,3-triazolium or imine dynamic cross-links by reactive processing

Polyethylene-based covalent adaptable networks (PE CANs) are obtained by reactive extrusion in a micro-compounder of a commercial maleic anhydride-grafted polyethylene (PE-g-MA) with two tailor-made α,ω-diamine cross-linkers carrying either imine or 1,2,3-triazolium groups as dissociative covalent dynamic bonds. Depending on the chemical nature of the exchangeable bonds, drastically different properties are demonstrated by FTIR, swelling/extractible, reactive dissolution and rheological experiments. The imine-containing PE CAN yields a high gel fraction but rheology and reactive dissolution experiments demonstrate the lack of dynamicity due to side-reactions promoting the formation of non-dynamic covalent cross-links. Such undesirable reaction occurs already during the processing stage from the premature cleavage of the imine bonds into amines, and further formation of permanent imide cross-links by reaction with pendent maleic anhydrides. Conversely, the 1,2,3-triazolium-containing PE CAN presents a lower gel fraction but exhibits viscoelastic properties typical of dissociative CANs. While this material is easily reprocessable by compression moulding, the evolution of the rheological properties at high temperatures (160–200 °C) points toward the occurrence of side reactions slowing down the relaxation dynamics which we attribute to the chemical rearrangement of the 1,2,3-triazolium cross-links. These two examples illustrate the difficulty of using amine-functionalized dynamic cross-links in the synthesis of PE CANs by reactive extrusion using PE-g-MA.

Segmental and Chain Dynamics of Polyisoprene-Based Model Vitrimers.

Polymer vitrimers are a new class of materials that combine the advantages of thermoplastics and thermosets. This is due to the dynamic nature of the chemical bonds linking different chains. However, how this property affects the polymer dynamics at different length scales is still an open question. Here, we investigate the dynamics of model vitrimers based on well-defined polyisoprene (PI) chains using broadband dielectric spectroscopy. In this way, we study the polymer dynamics from the segmental to the whole chain scale, taking advantage of the fact that PI belongs to the class of molecules that exhibit a net dipole moment associated with the end-to-end vector. Three distinct relaxation phenomena are identified. The fastest relaxation is attributed to the segmental PI dynamics with a small influence of the cross-linking. An intermediate relaxation attributed to the dipolar character of the cross-linker is also observed. The slower identified relaxation component, corresponding to limited fluctuations of the end-to-end PI chains, is found to be determined by the dynamics of the clusters formed by the cross-linkers with an average time scale orders of magnitude faster than that of the terminal relaxation as inferred from the viscous flow.

Unveiling the geometrical and mechanical properties of Σ3 (111) grain boundaries in Ni-based alloys: From interfacial insights

Understanding the properties of interfaces and grain boundaries is pivotal for advancing the design and performance of modern materials and devices. The mechanical strength and durability of materials are significantly influenced by the integrity of these interfaces and grain boundaries. In this study, we employ density functional theory calculations to investigate the geometries, electronic properties, and mechanical behaviors of Σ3 (111) grain boundaries in Ni, AlNi3, and FeNi3 systems. Result reveals that these grain boundaries exhibit trigonal, hexagonal, and hexagonal close-packed structures with minimal bond length distortions, attributed to specific misorientation angles of 60°. They also demonstrate bonding characteristics akin to their corresponding polycrystalline bulk materials, indicating stability and twist character with anti-phase boundaries. Evaluation of grain boundary energetics indicates low energy values and stability across the studied systems. Furthermore, we conduct a detailed examination of the interfacial grain boundary structures of Σ3 (111) Ni/AlNi3 and Σ3 (111) Ni/FeNi3, revealing trigonal closed space configurations with twist character and anti-phase boundaries. Electron localization in interfacial regions suggests a metallic nature of interfacial bonds, supported by density of state calculations and positive Cauchy pressure. Assessment of mechanical properties indicate ductile behavior due to structural heterogeneity, moderate anisotropy. Overall, present study underscores the enhanced mechanical properties resulting from heterogeneity, offering promise for future applications in advanced materials and devices. Additionally, a comparative analysis with highlights the advancements and contributions of this study to the existing body of knowledge.

Panoply of P: An Array of Rhenium-Phosphorus Complexes Generated from a Transition Metal Anion.

We expand upon the synthetic utility of anionic rhenium complex Na[(BDI)ReCp] (1, BDI = N,N'-bis(2,6-diisopropylphenyl)-3,5-dimethyl-β-diketiminate) to generate several rhenium-phosphorus complexes. Complex 1 reacts in a metathetical manner with chlorophosphines Ph2PCl, MeNHP-Cl, and OHP-Cl to generate XL-type phosphido complexes 2, 3, and 4, respectively (MeNHP-Cl = 2-chloro-1,3-dimethyl-1,3,2-diazaphospholidine; OHP-Cl = 2-chloro-1,3,2-dioxaphospholane). Crystallographic and computational investigations of phosphido triad 2, 3, and 4 reveal that increasing the electronegativity of the phosphorus substituent (C < N < O) results in a shortening and strengthening of the rhenium-phosphorus bond. Complex 1 reacts with iminophosphane Mes*NPCl (Mes* = 2,4,6-tritert-butylphenyl) to generate linear iminophosphanyl complex 5. In the presence of a suitable halide abstraction reagent, 1 reacts with the dichlorophosphine iPr2NPCl2 to afford cationic phosphinidene complex 6+. Complex 6+ may be reduced by one electron to form 6•, a rare example of a stable, paramagnetic phosphinidene complex. Spectroscopic and structural investigations, as well as computational analyses, are employed to elucidate the influence of the phosphorus substituent on the nature of the rhenium-phosphorus bond in 2 through 6. Furthermore, we examine several common analogies employed to understand metal phosphido, phosphinidene, and iminophosphanyl complexes.

A mean field description of steady state isotropic structural superplastic deformation

A model developed previously to treat steady state isotropic superplastic deformation turned out to be of generic value and relevant to many classes of materials from metallic materials, ceramics, intermetallic compounds, composites, bulk metallic glasses, and geological materials. The present paper demonstrates the applicability of the concept of “oblate spheroidal ensembles of atoms containing quantified excess free volume present in a general grain boundary” to predict quantitatively the response of general, high-angle grain boundaries when subjected to external stimuli, e.g., an external stress, irrespective of the nature of the atomic bonds (metallic, ionic, or covalent) in preference to purely geometric descriptions of the grain boundary. The emergence of “oblate spheroids” as a response to an external stimulus is regarded in this analysis as self-organizing and a basic phenomenon that cuts across material classes and the nature of the chemical bonds.

A theoretical investigation of the competition between σ- and π-holes on the stability of the complexes resulting from the interaction between the COCl2 and OCY molecules (Y = S, Se, and Te)

Carbonyl dichloride (COCl2), also known as phosgene, is a highly toxic gas, whose exposure or acute inhalation causes severe respiratory complications, such as pulmonary edema, pulmonary emphysema, and even death. In this study, we theoretically investigated the complexes formed by the interaction between the COCl2 (phosgene) and OCY molecules (Y = S, Se, and Te). Complex geometry optimization yielded three distinct types of conformations. Conformation-I complexes were stabilized by two concurring chalcogen-bonding interactions (i.e. O⋯Y and Cl⋯Y) by forming a ring structure. However, only a single linear interaction (O⋯C) or (O⋯Cl) occurred in conformation-II and III complexes, forming complexes with the nature of tetrel and halogen bonds, respectively. According to the results of the molecular electrostatic potential (MEP), interaction energy (ΔET), natural bond orbital (NBO), and so on, the σ-hole of the Y atom in the OCY molecule exhibited higher acidic strength and formed more stable complexes than those resulting from the σ- and π-holes of the COCl2 molecule.