Natural Matrices Research Articles

New Insight into the Degradation of Sunscreen Agents in Water Treatment Using UV-Driven Advanced Oxidation Processes

This study evaluates, for the first time, the effects of UV/PMS and UV/H2O2/PMS processes on the degradation of sunscreen agents in synthetic and natural water matrices and compares their effectiveness with the more conventional UV/H2O2. Investigations were conducted using a mixture of organic UV filters containing 4-methylbenzylidene camphor (4-MBC) and 2-ethylhexyl-4-methoxycinnamate. Among the investigated UV-driven AOPs, UV/PMS/H2O2 was the most effective in synthetic water, while in natural water, the highest degradation rate was observed during the degradation of EHMC by UV/PMS. The degradation of UV filters in the UV/PMS system was promoted by sulfate radical (68% of the degradation), with hydroxyl radical contributing approximately 32%, while both radical species contributed approximately equally to the degradation in the UV/H2O2/PMS system. The Vibrio fischeri assay showed an increase in inhibition (up to 70%) at specific stages of UV/H2O2 treatment when applied to natural water, which further decreased to 30%, along with an increase in UV fluence and progressive degradation. The Pseudomonas putida test recorded minor toxicity (<15%) after treatments. Magnetic biochar utilized in conjunction with UV-driven AOPs exhibited superior performance in eliminating residual contaminants, providing an efficient and sustainable approach to mitigate sunscreen agents in water treatment.

MECHANICAL AND PHYSICAL PROPERTIES OF BIOCOMPOSITES FOR FURNITURE AND THERMAL INSULATION

The objective of this work was to evaluate the performance of three natural fibers, namely, bagasse, kenaf bast fibers and cotton stalk, to produce particleboard suitable for application in green furniture and thermal insulation, using tannins and casein as natural matrices at the concentration of 15%. The particleboards were tested according to the relevant European standards to determine their mechanical properties, physical properties and thermal conductivity. The results showed that particleboards made from bagasse fibers and cotton stalks with casein adhesives exhibited higher mechanical performance and complied with European standards for board used for furniture and interior fitments. The particleboards prepared using tannins failed to satisfy the EN standards. All particleboards met the thermal conductivity requirements of the European standards.

In-Electrospray source Hydrogen/Deuterium exchange coupled to multistage fragmentation for the investigation of the protonation and fragmentation pathways of gas phase ions.

Identification of molecules in complex natural matrices relies on matching the fragmentation spectra of ions under investigation and the spectra acquired for the corresponding analytical standards. Currently, there are many databases of experimentally measured tandem mass spectrometry spectra (such as NIST, MzCloud, and Metlin), and considerable progress has been made in the development of software for predicting tandem mass spectrometry fragments in silico using combinatorial, machine learning, and quantum chemistry approaches (such as MetFrag, CFM-ID, and QCxMS). However, the electrospray ionization molecules can be ionized at different sites (protonated or deprotonated), and the fragmentation spectra of such ions are different. Here, we are using the combination of the in-ESI source hydrogen/deuterium exchange reaction and MSn fragmentation for the investigation of the fragmentation pathways for different protomers of organic molecules. It is shown that the distribution of the deuterium in the fragment ions reflects the presence of different protomers. For several molecules, the distribution of deuterium was traced up to the MS5 level of fragmentation revealing many unusual and unexpected effects. For example, we investigated the loss of HF from the ciprofloxacin and norfloxacin ions and observed that for ions protonated at -COOH group, the eliminating hydrogen always comes from -NH group. When ions are protonated at another site, the elimination of hydrogen with a probability of 30% occurs from the -NH group, and with a probability of 70%, it originates from other sites on the molecule. Such effects were not described previously. Quantum chemical simulation was used for the verification of the protonated structures and simulation of the corresponding fragmentation spectra.

Environmental aging effects on mechanical behavior of an hemp based biocomposite material for structural strengthening

Biocomposites are innovative materials usually made of natural fibers embedded in a natural matrix. The mechanical behavior of such materials when exposed to the environmental agents (i.e. UV radiations, high/low temperature, variable humidity conditions) is a crucial issue. This paper is aimed to investigate an hemp based biocomposite for structural strengthening, addressing a gap in the existing literature concerning the mechanical characterization of the composite constituents (i.e. hemp ropes and natural matrices) under accelerated weathering conditions. In particular, this research involves the mechanical behavior assessment of hemp ropes, four distinct types of matrices (i.e. two organic binder based matrices and two mortar based matrices) and the hemp/matrix interface. Tensile tests, three point bending tests, uniaxial compression tests and pull-out tests are carried out to characterize these components. To simulate accelerated weathering, samples of the biocomposite constituents are subjected to cycles of hygrothermal stress and UV radiation using an accelerated weathering testing apparatus. Subsequently, experimental mechanical tests are performed on the aged biocomposite components, and their mechanical properties are assessed and compared to those of the non-aged materials. The results reveal that aging leads to a significant reduction in the mechanical properties of the hemp ropes, and varying effects on the mechanical properties of matrices depending on their nature (organic binder-based or mortar-based matrices).

Optimization of vacuum impregnated nutmeg rind candy using RSM modeling: effect on functional and nutritional properties.

Vacuum impregnation (VI) stands as an innovative technique, used to create novel food formulations by impregnating vital nutritive compounds into natural food matrices. Process variables were syrup temperature ranging from (50 to 70°C), syrup concentration (60° to 80° Brix), and VI duration (10 to 20min). The optimal conditions emerged at 66.81°C for syrup temperature, 71.58° Brix for syrup concentration, and a precise 11.59min for the VI duration. At these paramount conditions, the candy exhibited striking attributes such as 50.0% water loss, 12.23% sugar gain, chewiness of 9N, and lightness value of 22.17. The predicted values using the developed model were validated with experimental data and indicated the adequacy of the generated model. The functional characterization of the optimized nutmeg rind candy showcased a marked reduction in myristicin content, signifying an augmented level of safety for consumption. Furthermore in-vitro anti-bacterial assay, total phenolics, flavonoids and tannin content, anti-oxidant potential, proximate composition and microstructure of the optimized candy were analysed.

Retention of ZnO nanoparticles onto polypropylene and polystyrene microplastics: Aging-associated interactions and the role of aqueous chemistry

Microplastics (MPs) are pervasive and undergo environmental aging processes, which alters potential interaction with the co-contaminants. Hence, to assess their contaminant-carrying capacity, mimicking the weathering characteristics of secondary MPs is crucial. To this end, the present study investigated the interaction of Zinc oxide (nZnO) nanoparticles with non-irradiated (NI) and UV-irradiated (UI) forms of the most abundant MPs, such as polypropylene (PP) and polystyrene (PS), in aqueous environments. SEM images revealed mechanical abrasions on the surfaces of NI-MPs and their subsequent photoaging caused the formation of close-ended and open-ended cracks in UI-PP and UI-PS, respectively. Batch-sorption experiments elucidated nZnO uptake kinetics by PP and PS MPs, suggesting a sorption-desorption pathway due to weaker and stronger sorption sites until equilibrium was achieved. UI-PP showed higher nZnO (∼3000 mg/kg) uptake compared to NI-PP, while UI-PS showed similar or slightly decreased nZnO (∼2000 mg/kg) uptake compared to NI-PS. FTIR spectra and zeta potential measurements revealed electrostatic interaction as the dominant interaction mechanism. Higher nZnO uptake by MPs was noted between pH 6.5 and 8.5, whereas it decreased beyond this range. Despite DOM, MPs always retained ∼874 mg/kg nZnO irrespective of MPs type and extent of aging. The experimental results in river water showed higher nZnO uptake on MPs compared to DI water, attributed to mutual effect of ionic competition, DOM, and MP hydrophobicity. In the case of humic acids, complex synthetic and natural water matrices, NI-MPs retained more nZnO than UI-MPs, suggesting that photoaged MPs sorb less nZnO under environmental conditions than non-photoaged MPs. These findings enhance our understanding on interaction of the MPs with co-contaminants in natural environments.

Influences of sodium hydroxide and oxalic acid treatments on physical, mechanical, thermal properties, and morphology of ramie fibers

The environmentally friendly properties of natural fibers cause their use as reinforcement in polymer matrices to continue to grow. However, its hydrophilic properties can significantly reduce interfacial interactions. Chemical treatment is one method used to reduce the hydrophilic nature of ramie fibers. This study aimed to investigate the effects on ramie fiber of three chemical treatments: oxalic acid at a concentration of 5 (wt.%), sodium hydroxide at 3, 5, and 7 (wt.%), and a combination of both treatments. Physical properties, moisture content, tensile strength, X-ray diffraction, Fourier transform infrared spectroscopy (FT-IR), thermal properties, contact angle, and morphology of ramie fibers before and after treatment were observed in this investigation. FT-IR test results showed a partial loss of amorphous content and more intense cellulose peaks in treated ramie fibers. The combination treatment of alkali and oxalic acid gave the best results, which initiated the dissolution of some of the lignin, hemicellulose, and extractive content. XRD results indicated the surface treatment also led to a 20.35% rise in the crystalline index. In addition, there was a significant increase in tensile strength of 136.10 % in fibers soaked with chemicals. The morphology of the fibers with treatment showed defibrillation and loss of contaminants on the fiber surface, which was the cause of the smaller fiber diameter. Therefore, this optimum treatment is expected to improve the interfacial properties of natural fibers and polymer matrices so that they can enhance the properties of composites when applied in industries.

Gut health benefits and associated systemic effects provided by functional components from the fermentation of natural matrices.

Recently, the role of the gut microbiota in metabolic health, immunity, behavioral balance, longevity, and intestine comfort has been the object of several studies from scientific communities. They were encouraged by a growing interest from food industries and consumers toward novel fermented ingredients and formulations with powerful biological effects, such as pre, pro, and postbiotic products. Depending on the selected strains, the operating conditions, the addition of suitable reagents or enzymes, the equipment, and the reactor configurations, functional compounds with high bioactivity, such as short-chain fatty acids, gamma-aminobutyric acid, bioactive peptides, and serotonin, can be enhanced and/or produced through fermentation of several vegetable matrices. Otherwise, their formation can also be promoted directly in the gut after the dietary intake of fermented foods: In this case, fermentation will aim to increase the content of precursor substances, such as indigestible fibers, polyphenols, some amino acids, and resistant starch, which can be potentially metabolized by endogenous gut microorganisms and converted in healthy molecules. This review provides an overview of the main functional components currently investigated in literature and the associated gut health benefits. The current state of the art about fermentation technology as a promising functionalization tool to promote the direct or indirect formation of gut-health-enhancing components was deepened, highlighting the importance of optimizing microorganism selection, system setups, and process conditions according to the target compound of interest. The collected data suggested the possibility of gaining novel functional food ingredients or products rich in functional molecules through fermentation without performing additional extraction and purification stages, which are needed when conventional culture broths are used.

Prenatal acetaminophen exposure and the developing ovary: Time, dose, and course consequences for fetal mice

Acetaminophen is an emerging endocrine disrupting chemical and has been detected in various natural matrices. Numerous studies have documented developmental toxicity associated with prenatal acetaminophen exposure (PAcE). In this study, we established a PAcE Kunming mouse model at different time (middle pregnancy and third trimester), doses (low, middle, high) and courses (single or multi-) to systematically investigate their effects on fetal ovarian development. The findings indicated PAcE affected ovarian development, reduced fetal ovarian oocyte number and inhibited cell proliferation. A reduction in mRNA expression was observed for genes associated with oocyte markers (NOBOX and Figlα), follicular development markers (BMP15 and GDF9), and pre-granulosa cell steroid synthase (SF1 and StAR). Notably, exposure in middle pregnancy, high dose, multi-course resulted in the most pronounced inhibition of oocyte development; exposure in third trimester, high dose and multi-course led to the most pronounced inhibition of follicular development; and in third trimester, low dose and single course, the inhibition of pre-granulosa cell function was most pronounced. Mechanistic investigations revealed that PAcE had the most pronounced suppression of the ovarian Notch signaling pathway. Overall, PAcE caused fetal ovarian multicellular toxicity and inhibited follicular development with time, dose and course differences.

Regression analysis for the determination of microplastics in sediments using differential scanning calorimetry

This research addresses the growing need for fast and cost-efficient methods for microplastic (MP) analysis. We present a thermo-analytical method that enables the identification and quantification of different polymer types in sediment and sand composite samples based on their phase transition behavior. Differential scanning calorimetry (DSC) was performed, and the results were evaluated by using different regression models. The melting and crystallization enthalpies or the change in heat capacity at the glass transition point were measured as regression analysis data. Ten milligrams of sea sand was spiked with 0.05 to 1.5 mg of microplastic particles (size: 100 to 200 µm) of the semi-crystalline polymers LD-PE, HD-PE, PP, PA6, and PET, and the amorphous polymers PS and PVC. The results showed that a two-factorial regression enabled the unambiguous identification and robust quantification of different polymer types. The limits of quantification were 0.13 to 0.33 mg and 0.40 to 1.84 mg per measurement for semi-crystalline and amorphous polymers, respectively. Moreover, DSC is robust with regard to natural organic matrices and allows the fast and non-destructive analysis of microplastic within the analytical limits. Hence, DSC could expand the range of analytical methods for microplastics and compete with perturbation-prone chemical analyses such as thermal extraction–desorption gas chromatography–mass spectrometry or spectroscopic methods. Further work should focus on potential changes in phase transition behavior in more complex matrices and the application of DSC for MP analysis in environmental samples.

Solar photocatalytic CeO2/g-C3N4 removal of micropollutants in the water environment through the generation of singlet oxygen

The synthesis of photocatalysts with good photocatalytic performance to selectively oxidize micropollutants in complex water environments has received widespread attention. This study successfully synthesized a CeO2/g-C3N4 composite, which could degrade sulfamethoxazole (SMX) up to 95 % under simulated sunlight (SSL) in 60 min. Additionally, it exhibited favorable selective oxidation characteristics in complex water environments. EPR and radical scavenging experiments proved the main oxidation contributions of singlet oxygen (1O2) in the system. Photoluminescence spectroscopy demonstrated that the composite material could generate more triplet excitons to generate 1O2 with ground-state oxygen (3O2) through an energy transfer pathway. The product analysis of the two models of micropollutants, SMX and carbamazepine, indicated an overall rise in the biodegradability of the majority of intermediates, accompanied by a decrease in acute toxicity. The composite showed high stability even after 5 cycles. Various micropollutants have degradation of varying degrees in different natural water matrices. In summary, this study introduced a novel photocatalytic oxidation strategy with selective oxidation capability, providing possibilities for practical applications and environmentally friendly photocatalytic processes.

Meat Starter Culture Reduces Aspergillus parasiticus Production of Aflatoxins on Meat-Based and Salami Model Media.

There is great concern about the risk posed by the consumption of food contaminated with aflatoxins (AF), produced mostly by Aspergillus strains, that can also be found in dry-fermented meat products (DFMPs). The aim of this study was to investigate the inhibitory effect of meat starter culture (SC), frequently used for fermentation in the meat industry, on A. parasiticus growth and the production of aflatoxin B1 (AFB1), aflatoxin B2 (AFB2), aflatoxin G1 (AFG1), aflatoxin G2 (AFG2), and sterigmatocystin (STE) on different meat-based (CMA) and salami model (SM-G) media. Incubation was carried out under optimal conditions for fungal growth and under typical conditions for ripening of DFMPs for 21 days. Reversed-phase UPLC-MS/MS analysis was performed to determine mycotoxin production. SC reduced A. parasiticus growth more on CMA than on SM-G media. AFB1 formation was inhibited on both types of SC-containing media, although SC generally had a stronger inhibitory effect on AFB1 production on CMA than on SM-G. AFB1 and AFB2 were produced on CMA, while AFB1 dominated in SM-G, AFG1, and AFG2 were not detected in any media. The results show that SC inhibited AFB1 formation of A. parasiticus on SM-G media after 21 days of incubation under typical conditions for the production of DFMPs. These results indicate the necessity to investigate AF on natural matrices in an environment that is as similar as possible to real conditions in the production of DFMPs.

Investigation of chemically treated jute/kenaf/glass fiber with TiO2 nano-filler for tensile and impact characteristics

The essential objective of this work was to investigate the effect of silane treatment on the tensile and impact strength of composites made of jute/kenaf/glass fibers with the TiO2 nano-filler. This study also sought to optimize the factors connected with this treatment method. To develop and evaluate trials, the researchers used Response Surface Methodology (RSM) with central composite designs, emphasizing the optimization of silane concentration, immersion time, and nano-filler content. The researchers were able to effectively create quadratic models to forecast the tensile and impact strengths of the nano-composite throughout the silane treatment procedure. The adjustment of silane concentration, immersion duration, and nano-filler content discovered the best conditions for obtaining maximum tensile strength. The optimal values for silane concentration and immersion time have been identified to be 15 wt. % and 30 min, respectively. Considering these conditions, the composite’s tensile strength increased by 32.13% and its impact strength improved by 8.34% above the lowest values achieved from RSM optimization. The results demonstrate the practical value of silane treatment, notably in boosting tensile and impact strengths while enhancing interfacial adhesive among natural fibers and polymer matrices.

Covalent conjugate of pea protein induced by cyanidin-3-O-glucoside quinone: The structural formation and functional properties

The unique structural of anthocyanins makes them vulnerable to degradation within food processing environments. Proteins commonly coexist with polyphenols in natural food matrices on a non-covalent and covalent basis, serving to stabilize protection for polyphenols. Here, three natural pea-extracted proteins, including albumin, vicilin, and legumin were bound to cyanidin-3-O-glucoside (C3G), and binding modes, conjugate structures and functions were characterized. Isothermal titration calorimetry showed a strongly exothermic interaction between C3G and proteins. The results of sodium dodecyl sulfate-polyacrylamide gel electrophoresis and fourier transform infrared spectroscopy revealed that the C3G-quinone (C3GQ) formed by C3G oxidation established covalent cross-links with C–S and C–N in the amino acid residues of proteins, and could form more large molecular weight aggregates at an addition amount of 1 mM. The free sulfhydryl and amino contents of the three protein conjugates decreased with the addition of C3GQ. Due to the presence of 4–5 times more sulfhydryl groups in albumin as compared to globulin, albumin showed a 20% higher binding capacity for C3GQ than globulin. This consequently led to the highest antioxidant activity in the C3GQ-albumin conjugate. In contrast to native pea proteins, the introduction of covalent modifications induces changes in the secondary structure of the pea proteins. Specifically, the structure of albumin tends to exhibit increased orderliness, while the molecular flexibility of globular proteins was augmented. Thus, the conjugates have enhanced thermal stability. Our results affirmed that the stability of C3G can be more effectively improved through designing it to covalently interact with proteins relative to non-covalent interactions. This study aimed at offering novel theoretical underpinnings for the functional utilization of C3G and pea proteins in the food industry.

A review on natural fiber composites: Polymer matrices, fiber surface treatments, fabrication methods, properties, and applications

AbstractHigh performance and durability are essential for goods to satisfy the needs of the expanding worldwide market. Wood plastic composites (WPCs) are materials made from a combination of wood, polymers, and additives. WPCs can be extruded, injected, compressed, or thermoformed. Presently, WPCs are manufactured using sophisticated processes including as laser sintering, fused layer modeling, and additive manufacturing. Properly managing the melt temperature and pressure is crucial in the manufacturing process of WPCs to ensure effective polymer incorporation. Natural fibers have distinct benefits for polymer composites, but they also have some serious drawbacks, like lower strength properties—especially lower impact strength than synthetic fibers—poor compatibility with hydrophobic polymers, poorer dimensional stability and moisture absorption due to hydroxly groups, a maximum processing temperature that is limited, thermal degradation above 200–220°C, and lower biological durability. The modification of the surface of the fibers improves the mentioned disadvantages of the natural fibers. High‐quality WPCs require the application of chemical or physical treatment to the wood fibers. This extensive review focused on the modification techniques applied to the surface of wood, manufacturing processes, and properties and applications of WPCs.Highlights Modification methods used in surface treatment of natural fibers was explained. Properties and recent applications of wood polymer composites were given. Optimum requirements of natural fibers and polymer matrices are given. Fabrication methods of natural fiber composites are extensively given.

Removal of furosemide from water by emulsion liquid membrane: Influence of experimental conditions and real water matrices

This work investigates the removal of furosemide (FSM) from low pH aqueous phase by emulsion liquid membrane (ELM). The influence of various experimental conditions on FSM permeation rate and subsequent emulsion stability, such as surfactant concentration, diluent type, stripping solution concentration, feed solution pH, stripping solution/membrane solution volume ratio, emulsification time and speed, stirring rate, initial FSM concentration, and emulsion/feed solution volume ratio, was evaluated. The ability to extract FSM in different natural complex matrices was examined. The ELM system is formed by Span 80 (5% w/w) as surfactant, hexane as diluent, NaOH (0.01 N) as stripping agent, stripping solution/membrane solution volume ratio of 1/1, treatment volume ratio of 20/200, and mixing rate of 200 rpm. The treatment process demonstrates complete removal of FSM within a remarkably short time span of 20 min. In seawater and natural mineral water, the extraction efficiency is 94.3% and 96.8%, respectively, after 20 min. Additionally, the stripping efficiency of FSM is reported to be excellent (100%), demonstrating the remarkable ability of ELM to remove and recover FSM from water. For these reasons, the ELM technique is a particularly interesting process for treating FSM-contaminated water.

Specific fractionation of ginsenosides based on activated carbon fibers and online fast screening of ginseng extract by mass spectrometry

Ginseng is beneficial in the prevention of many diseases and provides benefits for proper growth and development owing to the presence of various useful bioactive substances of diverse chemical heterogeneity (e.g., triterpenoid saponins, polysaccharides, volatile oils, and amino acids). As a result, understanding the therapeutic advantages of ginseng requires an in-depth compositional evaluation employing a simple and rapid analytical technique.In this work, three types of surface-activated carbon fibers (ACFs) were prepared by gas-phase oxidation, strong acid treatment, and Plasma treatment to obtain CO2-ACFs, acidified-ACFs, and plasma-ACFs, respectively. Three prepared ACFs were compared in terms of their physicochemical characterization (i.e., surface roughness and functional groups). A separation system was built using a column with modified ACFs, followed by mass spectrometry detection to investigate and determine substances of different polarities. Among the three columns, CO2-ACFs showed the optimum separation effect. 13 strong polar compounds (12 amino acids and1 oligosaccharide) and 15 lesser polar compounds (ginsenosides) were separated and identified successfully within 4 min in the ginseng sample. The data obtained by CO2-ACFs-TOF-MS/MS and UHPLC-TOF-MS/MS were compared. Our approach was found to be faster (4 min vs. 36 min) and greener, requiring much less solvent (1 mL vs. 10.8 mL), and power (0.06 vs. 0.6 kWh). The developed methodology can provide a faster, eco-friendly, and more reliable tool for the high-throughput screening of complex natural matrices and the simultaneous evaluation of several compounds in diverse samples.

Métodos extractivos y aislamiento de ácido aristolóquico a partir de matrices naturales.

Introduction: Medicinal plants from the Aristolochia genus have traditionally been employed to treat various pathologies. However, these plants are known to contain substantial quantities of aristolochic acids, both type I and II, which have been linked to the development of nephropathies and high-risk cancers due to their inherent toxicity. Thus, the utilization of these plants is considered a serious health risk for individuals. Methods: This study aimed to identify effective extraction and isolation methods for aristolochic acid from natural matrices to obtain a standardized extract of the Aristolochia plant. The Zaragoza liana (Aristolochia) from Puyo and Macas- Ecuador, was selected for analysis. The extraction methods employed included supercritical fluids and ultrasound-assisted extraction, with methanol as the solvent. Subsequently, metabolites obtained from these processes were identified using thin-layer chromatography (TLC) to confirm the presence of aristolochic acid. Results: The outcomes revealed that aristolochic acid exhibited a retention factor within Rf 0.61-0.77. These results were observable through yellow-colored bands under white light, appearing dark or gray under UV light of 254 nm and displaying black coloration with a yellow halo under UV light of 366 nm. These distinctive characteristics provided conclusive evidence of the presence of aristolochic acid in the analyzed samples. Conclusion: This study has established effective methods for extracting and isolating aristolochic acid from Aristolochia plants. The results obtained through thin-layer chromatography confirm the presence of this compound in the analyzed samples, underscoring the concern regarding the toxicity associated with these medicinal plants. These findings emphasize the importance of standardizing Aristolochia extracts and highlight the potential risks linked to their consumption in human health.

Review of sustainable, eco-friendly, and conductive polymer nanocomposites for electronic and thermal applications: current status and future prospects.

Biodegradable polymer nanocomposites (BPNCs) are advanced materials that have gained significant attention over the past 20 years due to their advantages over conventional polymers. BPNCs are eco-friendly, cost-effective, contamination-resistant, and tailorable for specific applications. Nevertheless, their usage is limited due to their unsatisfactory physical and mechanical properties. To improve these properties, nanofillers are incorporated into natural polymer matrices, to enhance mechanical durability, biodegradability, electrical conductivity, dielectric, and thermal properties. Despite the significant advances in the development of BPNCs over the last decades, our understanding of their dielectric, thermal, and electrical conductivity is still far from complete. This review paper aims to provide comprehensive insights into the fundamental principles behind these properties, the main synthesis, and characterization methods, and their functionality and performance. Moreover, the role of nanofillers in strength, permeability, thermal stability, biodegradability, heat transport, and electrical conductivity is discussed. Additionally, the paper explores the applications, challenges, and opportunities of BPNCs for electronic devices, thermal management, and food packaging. Finally, this paper highlights the benefits of BPNCs as biodegradable and biodecomposable functional materials to replace traditional plastics. Finally, the contemporary industrial advances based on an overview of the main stakeholders and recently commercialized products are addressed.

Nanofiltration-Assisted Concentration Processes of Phenolic Fractions and Carotenoids from Natural Food Matrices

In new food formulations, carotenoids and phenolic compounds are likely to be the most sought after food ingredients according to their bioactivity, nutraceutical, nutritional value, and compatibility properties once incorporated into food formulations. Such solutes are naturally present in many plant-based sources, and some portions are directly consumed when enriching food products and formulations; however, some portions, which are contained in the parts of the plant sources not considered edible, including the leaves, peel, and seeds, among other by-products, are commonly wasted. Related to this, scientists have found a new window for obtaining these bioactive molecules, but their recovery remains a challenge. To some extent, the final purification and polishing requires highly selective performance to guarantee the desired properties and concentration. In this regard, membrane technologies, such as nanofiltration (NF), represent an alternative, owing to their highly selective properties when separating low-molecular-weight compounds. NF becomes immediately suitable when the pretreated extracts are subjected to further efficient concentration, fractionation, and polishing of phenolic fractions and carotenoids. The separation efficiency (usually higher than 97%) of NF technology is high according to the low pore size of NF membranes, but the low temperature in process separation also contributes to the separation of thermolabile compounds. Therefore, this paper reviews the ongoing cases of studies reporting the successful separation and polishing of phenolic fractions and carotenoids from distinct sources. In particular, we have focused our attention on the main interactions during the separation process and the drawbacks and advantages of using membranes for such a case study.