Natural Alkaline Research Articles

OCCURRENCE OF ALKALINE WATERS IN THE SOUTHERN APUSENI MOUNTAINS (ROMANIA) – RESULTS OF A PRELIMINARY SURVEY

Consumption of alkaline water by the general population has increased over the past two decades, as certain customers value this type of water for its presumed ability to promote health. In spite of the commercial interest for natural alkaline water sources suitable for drinking purposes, relatively few scientific publications related to the occurrence of these waters are available. This article presents the results of a preliminary survey for alkaline water in the Southern Apuseni Mountains. This region has been selected as study area due to the presence of limestones and ophiolitic rocks, very often in contact with each other, both having the potential to bring the pH of natural waters to the alkaline range. A total of 78 sampling points, represented by streams, lakes, springs and dug wells have been investigated, and the physico-chemical common parameters were measured in the field. Alkaline water with pH above 8.0 has been found in almost 29 sampling points, out of which 7 points had a pH above 8.5. Most of the points were represented by surface running water. The prospective areas, as identified by this survey, correspond to Trascau Mts., and to the western (predominantly ophiolitic) part of the Metaliferi Mts. The data included in this paper may represent the starting point for a systematic survey and for a detailed study of the potential alkaline water resources in the study area.

Flame‐Retarded Poly (Lactic Acid) Containing Phosphating Chitosan

ABSTRACTPoly (lactic acid) (PLA) is a promising thermoplastic aliphatic polyester to replace petroleum‐based polymers in many fields. However, its flammability has limited its application in areas where fire safety is crucial. Chitosan (CS) is a type of natural alkaline polysaccharide with abundant content and good biocompatibility. In this study, a bio‐based flame‐retardant phosphating chitosan (PCS) was prepared and the effects of PCS on the flammability, mechanical and thermal properties of PLA were evaluated. The limiting oxygen index (LOI) of PLA/PCS blend containing 9 wt% PCS reached 28.9% which was relatively higher than LOI of pure PLA of 20% and passed UL‐94 V‐0 rating. PCS accelerated the carbonization of PLA matrix, and increased the char residue at 800°C. The combustion process was further investigated by cone calorimeter test, and the peak heat release rate and total heat release were significantly decreased. X‐ray photoelectron spectrometer and thermogravimetric‐infrared analysis were used to analyze the composition of char residue and pyrolysis products, which further confirmed that the flame‐retardant mechanism of PCS was the combination of condensed phase and gas phase. However, the mechanical properties of PLA/PCS blend inevitably decreased with increasing of PCS content.

Sediment microbial communities of a technogenic saline-alkaline reservoir

Various natural saline and alkaline habitats have recently been widely investigated, but knowledge of anthropogenic habitats with more complex environmental conditions is still lacking. This research looks at the structure of microbial communities in 18 bottom sediment samples from a technogenic water body with saline and alkaline composition. The core samples were collected from 2 columns in the western and eastern parts of an artificial water body at the Verkhnekamskoe Salt Deposit (Russia). The microbial community structure was studied using high-throughput 16S rRNA gene sequencing. The bottom sediment composition (salinity, pH, and toxic element content) varies greatly with depth and laterally throughout the study area. The study found a considerable difference in bacterial community diversity between the 2 columns, but no considerable difference was found between the communities at various depths of the studied layers. Proteobacteria, Firmicutes, and Actinobacteria, which are common in both natural and artificial saline and alkaline environments, make up the majority of the bacteria found in the samples. Studies have shown that salinity and total alkalinity are the key factors influencing the formation of microbial communities. Ralstonia and Pseudomonas were the two most common genera in the sediment samples. These two genera are known for having high metabolic flexibility, which means they can survive in extreme environments and use a variety of carbon compounds as energy sources. The study also found that Ralstonia is indicator bacteria in samples with the highest concentrations of toxic elements compared to the other samples. A relatively high microbial diversity was discovered in the studied anthropogenic water reservoir despite the extreme alkaline and saline conditions, but it is considerably lower than that found in natural, less alkaline habitats. This research offers insight into the mechanisms behind microbial community formation in complex anthropogenic environments and covers key factors in microbial community distribution.

Preparation of SiO2-polydimethylsiloxane-octadecyltrichlorosilane superhydrophobic coating and its self-healing performance

The self-healing performance of superhydrophobic coatings is an important property to enhance the durability and self-cleaning character, which has been a focus of surface modification in recent years. In this work, a simple method was proposed for preparing the superhydrophobic coatings with self-healing properties on slides using nano-SiO2, octadecyltrichlorosilane, and polydimethylsiloxane. The hydrophobic properties, morphologies, compositions, structures, stability, and self-healing properties were respectively investigated via various characterizations and tests. The results indicated that the self-healing properties of the coatings were induced by the Si-O-Si bonds through X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. The best self-healing property and hydrophobicity after healing were obtained when the content of polydimethylsiloxane was 35% (wt.), and the contact angle of water would arrive at 160.98° when the concentration of nano-SiO2 was 3% (wt.). The contact angle of each coating surface remained stable and thermally stable when the temperature was increased from 100 to 300 °C ( Tg), and the coatings remained stable under natural acidic and alkaline environments as well as mechanical shocks. So superhydrophobic coatings with self-healing performance have potential applications for the development of durable surfaces.

Mineral transformation, element transport and hydrological impact in weathering at the Bingling Temple Grottoes: Implications for weathering in alkaline environments in NW China

Alkaline environments are common in arid and semi-arid regions in northwestern China and have preserved quantities of rock heritages along the Silk Road. In contrast to the frequently reported weathering mechanism of stone heritages in acidic conditions, mineral weathering mechanism (especially the transformation mechanism of smectite) in natural alkaline environments still remains to be evaluated. To deepen the understanding of weathering in such an environment, research idea from critical zone science was applied to investigate the element transport and mineral transformation from protolith (interbedded sandstone and conglomerate) to regolith in a world cultural heritage, Bingling Temple Grottoes (BTG), in northwestern China. From geochemical and mineralogical characterizations on boreholes, excavated profiles, fractures and cliff surface, we found that dissolution of calcite, plagioclase (anorthite, albite) and K-feldspar (orthoclase) caused major elemental loss of Na, K and Ca (to aqueous solution) in the BTG, and elements of Mg and Fe mostly retained in solid materials. Characterizations on the cliff surface demonstrated higher extents of element depletion and mineral weathering and lower ultrasonic P-wave velocities in sandstone than in conglomerate, and in the bottom sandstone layers (located in the capillary zone and exposure to rain scouring) than in upper sandstone layers (located in the cave and free of precipitation). The transformation of smectite from protolith to regolith follows the sequential reactions: dehydrated smectie → bihydrated smectite → randomly interstratified illite/smectite → illite. Such transformation pathway is favored by alkaline pH and wetting–drying cycles frequently occurred at the BTG. Typical weathering patterns such as clay swelling damage, efflorescence, salt precipitation, etc., are highly-linked to seasonal changes in the hydrological process influenced by both reservoir construction and groundwater system. Our study provides more evidence for the illitization of smectite in natural alkaline environments and highlights the hydrological impacts on weathering patterns of rock grottoes.

Dopant-Induced Charge Redistribution on the 3D Sponge-like Hierarchical Structure of Quaternary Metal Phosphides Nanosheet Arrays Derived from Metal-Organic Frameworks for Natural Seawater Splitting.

Dopant-induced electron redistribution on transition metal-based materials has long been considered an emerging new electrocatalyst that is expected to replace noble-metal-based electrocatalysts in natural seawater electrolysis; however, their practical applications remain extremely daunting due to their sluggish kinetics in natural seawater. In this work, we developed a facile strategy to synthesize the 3D sponge-like hierarchical structure of Ru-doped NiCoFeP nanosheet arrays derived from metal-organic frameworks with remarkable hydrogen evolution reaction (HER) performance in natural seawater. Based on experimental results and density functional theory calculations, Ru-doping-induced charge redistribution on the surface of metal active sites has been found, which can significantly enhance the HER activity. As a result, the 3D sponge-like hierarchical structure of Ru-NiCoFeP nanosheet arrays achieves low overpotentials of 52, 149, and 216 mV at 10, 100, and 500 mA cm-2 in freshwater alkaline, respectively. Notably, the electrocatalytic activity of the Ru-NiCoFeP electrocatalyst in simulated alkaline seawater and natural alkaline seawater is nearly the same as that in freshwater alkaline. This electrocatalyst exhibits superior catalytic properties with outstanding stability under a high current density of 85 mA cm-2 for more than 100 h in natural seawater, which outperforms state-of-the-art 20% Pt/C at high current density. Our work provides valuable guidelines for developing a low-cost and high-efficiency electrocatalyst for natural seawater splitting.

Treating grapes with a natural alkaline decoction prepared from (Salsola arbuscula Pall.)

In the article, the methods of increasing the efficiency of drying, shortening the drying time and obtaining high-quality dried raisins have been achieved by processing the bunches of large-sized raisin varieties of grapes grown in the Republic of Uzbekistan in different ways. The location of the large cultivation is considered to be the hill slopes with good wind circulation, as well as these areas are considered to be optimal, as well as there is a lot of precipitation in early autumn. To eliminate these inconveniences, the process of drying grape bunches is the use of basic and energy-saving methods of processing agricultural products, Salsola arbuscula Pall, which grows in the natural steppe regions of “Surkhandarya” region, is used for grape bunches. Experiments were conducted to determine the optimal concentration of the natural alkaline decoction prepared from the plant.

Review of secondary phases formed under natural alkaline conditions at low temperatures and implications for cement–bentonite interactions in radioactive waste repositories

Abstract The alteration of bentonite under alkaline conditions and the subsequent changes in properties such as permeability and self-sealing ability should be evaluated for the performance assessment of radioactive waste repositories. As the period of evaluation for alterations is extremely long, natural analog (NA) studies that can observe long-term phenomena similar to the system of radioactive waste repositories have significant advantages. However, locations that can be set up as NA study sites with significant similarity are limited and should be pursued by localizing analog systems. This literature review summarized studies reporting secondary phases formed at low temperatures (<100°C) under a broader range of natural sites which are chemically similar to the alkaline conditions expected at bentonite in radioactive waste repositories, including near pyrometamorphic rocks, near ophiolites, and in alkaline saline lakes. This review provides insights into the species, formation conditions, and stability of secondary phases that could be formed during cement–bentonite interactions and the timescale for mineralogical transitions from a metastable to a stable phase. The findings could be useful for selecting secondary phases to be considered in reactive transport modeling for predicting cement–bentonite interactions in radioactive waste repositories.

Bacteria-loaded biochar for the immobilization of cadmium in an alkaline-polluted soil.

The combination of biochar and bacteria is a promising strategy for the remediation of Cd-polluted soils. However, the synergistic mechanisms of biochar and bacteria for Cd immobilization remain unclear. In this study, the experiments were conducted to evaluate the effects of the combination of biochar and Pseudomonas sp. AN-B15, on Cd immobilization, soil enzyme activity, and soil microbiome. The results showed that biochar could directly reduce the motility of Cd through adsorption and formation of CdCO3 precipitates, thereby protecting bacteria from Cd toxicity in the solution. In addition, bacterial growth further induces the formation of CdCO3 and CdS and enhances Cd adsorption by bacterial cells, resulting in a higher Cd removal rate. Thus, bacterial inoculation significantly enhances Cd removal in the presence of biochar in the solution. Moreover, soil incubation experiments showed that bacteria-loaded biochar significantly reduced soil exchangeable Cd in comparison with other treatments by impacting soil microbiome. In particular, bacteria-loaded biochar increased the relative abundance of Bacillus, Lysobacter, and Pontibacter, causing an increase in pH, urease, and arylsulfatase, thereby passivating soil exchangeable Cd and improving soil environmental quality in the natural alkaline Cd-contaminated soil. Overall, this study provides a systematic understanding of the synergistic mechanisms of biochar and bacteria for Cd immobilization in soil and new insights into the selection of functional strain for the efficient remediation of the contaminated environments by bacterial biochar composite.

Aloperine targets lysosomes to inhibit late autophagy and induces cell death through apoptosis and paraptosis in glioblastoma

Glioblastoma (GBM) is an aggressive intracranial tumour, and current chemotherapy regimens have limited efficacy. Aloperine (ALO), a natural alkaline compound, has shown potential as an antitumor agent. However, the effect of ALO against GBM remains unclear. This study aimed to investigate the function of ALO in treating GBM. U87, A172, and GL261 cell lines were used for in vitro experiments, and GL261 was also used to establish in vivo models. The results showed that ALO inhibited the proliferation of GBM cells by cell cycle arrest and apoptosis. Furthermore, autophagy was found to play a critical role, suggested by observation of autophagosomes under the transmission electron microscopy. It was discovered for the first time that ALO targeted lysosomes directly in glioma cells, tested by fluo-rescence-labelled ALO and organelle-localizing probes. In addition, ALO inhibited late autophagy and induced paraptosis in GBM, verified by classical gene expression changes in qPCR and western blotting. Also, ALO inhibited tumour growth and acted synergistically with temozolomide in intracranial glioma mice models in vivo. Our findings suggest that ALO targets lysosomes to inhibit late autophagy in GBM, inducing cell cycle arrest, paraptosis, and apoptosis. ALO may therefore be a promising therapeutic agent for the treatment of GBM.

Preparation, characterization and activity evaluation of Spirulina-chitooligosaccharides capable of inhibiting biofilms

The biofilms formed by pathogenic microorganisms seriously threaten human health and significantly enhance drug resistance, which urgently call for developing drugs specifically targeting on biofilms. Chitooligosaccharides extracted from shrimp and crab shells are natural alkaline oligosaccharides with excellent antibacterial effects. Nevertheless, their inhibition efficacy on biofilms still needs to be improved. Spirulina (SP) is a microalga with negatively charged surface, and its spiral structure facilitates colonization in the depth of the biofilm. Therefore, the complex of Spirulina and chitooligosaccharides may play a synergistic role in killing pathogens in the depth of biofilm. This research first screened chitooligosaccharides with significant bactericidal effects. Subsequently, Spirulina@Chitooligosaccharides (SP@COS complex was prepared by combining chitooligosaccharides with Spirulina through electrostatic adsorption. The binding of the complex was characterized by zeta potential, z-average size, and fluorescence labeling. Ultraviolet-visible spectroscopy (UV-Vis) showed the encapsulation efficiency and the drug loading efficiency reached up to 90% and 16%, respectively. The prepared SP@COS2 exhibited a profound synergistic inhibition effect on bacterial and fungal biofilms, which was mainly achieved by destroying the cell structure of the biofilm. These results demonstrate the potential of Spirulina-chitooligosaccharides complex as a biofilm inhibitor and provide a new idea for addressing the harm of pathogenic microorganisms.

Remediation of acid mine drainage and immobilization of rare earth elements: Comparison between natural and residual alkaline materials

Acid mine drainage (AMD) is a well-known source of toxic trace metals in freshwaters. Traditional passive treatment systems rely on AMD neutralization with limestone and removal of most common toxic transition metals such as Cu and Zn with little attention to rare earth elements (REE). Alkaline waste materials now receive increasing attention as low cost AMD treatment alternatives in the circular economy. This study was set up to identify the efficiency of alkaline waste materials remediating AMD and scavenging REE in addition to other toxic trace elements. An AMD sample was collected from a lixiviate coming from pyrite heaps in the Iberian Pyrite Belt (pH = 1.8, 30 μM ∑REY). The sample was treated with either blast furnace slag (BFS) generated during smelting of iron ore in a blast furnace or biomass ashes (BA) derived from combustion of biomass, thereby using analytical grade CaCO3, and NaOH as reference products. The batch alkalinization experiments were conducted by adding each alkaline material at an amount to obtain an equal pH to ≈6.5. The required amounts of the products were NaOH < CaCO3<BFS < BA in line with their acid neutralizing capacities. The largest removal of sulfate from water was obtained in the CaCO3 treatment suggesting gypsum precipitation which was lower with BA and BFS and virtually absent with NaOH, these trends were confirmed by SEM-EDX and XRD. Both BFS and BA removed more Fe than CaCO3 and NaOH. The REE elements were well removed by all treatments (>99%) and the remaining REE concentrations in the solutions were clearly lower than values for Cu and Zn. The Zn and Cu removals were not consistently high enough (except with NaOH) to meet environmental limits in the discharge waters. The largest efficiency for REE removals was obtained with CaCO3. Indirect evidence here suggests that gypsum is a better host for the trivalent REE than Fe(III) minerals in the precipitates. The ionic radii of trivalent REE are more similar to Ca2+ than to Fe3+, explaining the better potential of gypsum as REE host. This study showed also the potential of BFS as alkaline agent for the remediation of AMD in terms of its higher alkalinity generation potential as compared to BA, thus making BA less promising than BFS.

Iron or sulfur respiration-an adaptive choice determining the fitness of a natronophilic bacterium Dethiobacter alkaliphilus in geochemically contrasting environments.

Haloalkaliphilic microorganisms are double extremophiles functioning optimally at high salinity and pH. Their typical habitats are soda lakes, geologically ancient yet widespread ecosystems supposed to harbor relict microbial communities. We compared metabolic features and their determinants in two strains of the natronophilic species Dethiobacter alkaliphilus, the only cultured representative of the class "Dethiobacteria" (Bacillota). The strains of D. alkaliphilus were previously isolated from geographically remote Mongolian and Kenyan soda lakes. The type strain AHT1T was described as a facultative chemolithoautotrophic sulfidogen reducing or disproportionating sulfur or thiosulfate, while strain Z-1002 was isolated as a chemolithoautotrophic iron reducer. Here, we uncovered the iron reducing ability of strain AHT1T and the ability of strain Z-1002 for thiosulfate reduction and anaerobic Fe(II) oxidation. Key catabolic processes sustaining the growth of both D. alkaliphilus strains appeared to fit the geochemical settings of two contrasting natural alkaline environments, sulfur-enriched soda lakes and iron-enriched serpentinites. This hypothesis was supported by a meta-analysis of Dethiobacterial genomes and by the enrichment of a novel phylotype from a subsurface alkaline aquifer under Fe(III)-reducing conditions. Genome analysis revealed multiheme c-type cytochromes to be the most probable determinants of iron and sulfur redox transformations in D. alkaliphilus. Phylogeny reconstruction showed that all the respiratory processes in this organism are likely provided by evolutionarily related early forms of unconventional octaheme tetrathionate and sulfite reductases and their structural analogs, OmhA/OcwA Fe(III)-reductases. Several phylogenetically related determinants of anaerobic Fe(II) oxidation were identified in the Z-1002 genome, and the oxidation process was experimentally demonstrated. Proteomic profiling revealed two distinct sets of multiheme cytochromes upregulated in iron(III)- or thiosulfate-respiring cells and the cytochromes peculiar for Fe(II) oxidizing cells. We suggest that maintaining high variation in multiheme cytochromes is an effective adaptive strategy to occupy geochemically contrasting alkaline environments. We propose that sulfur-enriched soda lakes could be secondary habitats for D. alkaliphilus compared to Fe-rich serpentinites, and that the ongoing evolution of Dethiobacterales could retrace the evolutionary path that may have occurred in prokaryotes at a turning point in the biosphere's history, when the intensification of the sulfur cycle outweighed the global significance of the iron cycle.

Multivalent Interactions Enable the Natural Alkaline Amino Acids to Transmute into Macroscopic Adhesive Materials.

Natural alkaline amino acids (aAAs) have been found to interact with tannic acid (TA) in aqueous solution via multiple noncovalent interactions, giving rise to the formation of water-immiscible supramolecular copolymers (aAAs/TA). The driving forces and the internal structures of the supramolecular copolymers were characterized by nuclear magnetic resonance (NMR), X-ray photoelectron spectroscopy (XPS), ζ-potential, elemental analysis (EA), and scanning electron microscopy (SEM). Rheological and lap shear adhesion measurements identify that the aAAs/TA soft materials exhibit wet and underwater adhesion, shear thinning, and self-healing behavior. This supramolecular adhesive can be utilized as both injectable materials and self-gelling powder. Another feature of the aAAs/TA adhesives is the acceptable cellular compatibility with L-929 cells, which enables the supramolecular copolymers to be potential soft materials for health care and bio-related applications. The work highlights that the cross-linked supramolecular polymerization strategy enables minimalistic biomolecules to emulate the functions of complicated proteins secreted by aquatic organisms.

Solubility of Amorphous Magnesium Carbonate at Low Temperatures: Implications for Carbonate Mineral Formation in Alkaline Lakes

Amorphous magnesium carbonate (AMC: MgCO3·nH2O) is a metastable phase with respect to crystalline magnesium carbonate. AMC has been suggested to be an important mineral, a major process of CO2 fixation in alkaline saline lakes. Understanding the role of AMC for carbon fixation in alkaline lakes requires knowledge of the solubility of AMC under the full range of relevant environmental conditions, but its solubility is poorly known for low water temperatures. In this study, the solubility of AMC at 7 °C was measured in laboratory experiments and compared with chemical analyses of water samples from Olgoy Lake, a natural alkaline saline lake in Mongolia. Laboratory measurements using both supersaturation and undersaturation methods provided very similar solubility products of AMC (log Ksp = −5.20 ± 0.02) at 7 °C, which was markedly higher than the solubility product at 25 °C (log Ksp = −5.59). The temperature dependence of the solubility of AMC is much greater than that of monohydrocalcite, another important authigenic calcium carbonate in alkaline lakes. Analyses of water from Olgoy Lake consistently showed a significant temperature dependency of ion activity products with respect to magnesium carbonate. The relatively high solubility of AMC at low temperatures implies that the formation of AMC requires relatively high concentrations of dissolved components in lakes. Our results suggest that the formation of AMC is favored more in summer than in winter.

Chitosan Enhances Intestinal Health in Cats by Altering the Composition of Gut Microbiota and Metabolites.

The interaction between gut microbiota and the health of the host has gained increasing attention. Chitosan is a natural alkaline polysaccharide with a wide range of beneficial effects. However, rare studies have been observed on the effects of dietary chitosan supplementation on intestinal health in cats. A total of 30 cats with mild diarrhea were divided into three groups, receiving a basic diet with 0 (CON), 500 (L-CS) or 2000 (H-CS) mg/kg chitosan. Samples of blood and feces were collected and analyzed for serology and gut microbiota composition. The results demonstrated that chitosan alleviated symptoms of diarrhea, with enhanced antioxidant capability and decreased inflammatory biomarker levels in serum. Chitosan reshaped the composition of gut microbiota in cats that the beneficial bacteria Allobaculum was significantly increased in the H-CS group. Acetate and butyrate contents in feces were significantly higher in the H-CS group in comparison to the CON group (p < 0.05). In conclusion, the addition of dietary chitosan in cats enhanced intestinal health by modulating their intestinal microbes and improved microbiota-derived SCFA production. Our results provided insights into the role of chitosan in the gut microbiota of felines.

Rapid and sensitive detection of alkaline phosphatase and glucose oxidase activity through fluorescence and colorimetric dual-mode analysis based on CuO NPs@ZIF-8 mediated enzyme-cascade reactions.

The combined application of nanozymes and natural enzymes has received widespread attention in recent years. In this work, a simple and efficient method was used to synthesize a composite material of CuO nanoparticle-modified zeolitic imidazolate framework-8 (CuO NPs@ZIF-8) with multiple enzyme activities (glucose oxidase-like and hydrolase-like activities) to detect the activity of natural enzymes through fluorescence and colorimetric (UV-vis) dual-mode detection. The hydrolase- and oxidase-like activities of CuO NPs@ZIF-8 show an acceptable affinity with l-ascorbic acid 2-phosphate trisodium (AAP) and o-phenylenediamine (OPD). Using the developed sensor, highly sensitive detection of natural enzymes glucose oxidase (GOX) and alkaline phosphatase (ALP) was achieved through both fluorescent and colorimetric analyses with a wide linear range (fluorescence for GOX: 0.86-1.23 × 105 mU mL-1, UV-vis for GOX: 0.081-1.62 × 105 mU mL-1; fluorescence for ALP: 0.042-1.20 × 104 mU mL-1, UV-vis for ALP: 0.0046-1.23 × 104 mU mL-1) and low LOQs (fluorescence for GOX: 0.86 mU mL-1, UV-vis for GOX: 0.081 mU mL-1; fluorescence for ALP: 0.042 mU mL-1, UV-vis for ALP: 0.0046 mU mL-1). Compared to the other fluorescent and colorimetric sensors, this sensor has better catalytic activity due to the addition of GOX and ALP, which can amplify the detection signal and improve the sensitivity. This is the first time that composite material CuO NPs@ZIF-8 with "tandem enzyme" activity was synthesized and applied in the detection of enzyme activity. Additionally, the proposed fluorescent and UV-vis platforms exhibit the capability to detect GOX and ALP in serum samples with satisfactory recovery, indicating potential application prospects in biochemical analysis.

Nutrient-doped synthetic silicates for enhanced weathering, remineralization and fertilization on agricultural lands of global cold regions- A perspective on the research ahead.

There is now a dire demand for negative emissions technologies (which sequester CO2 from the atmosphere) that can be rapidly deployed, are scalable, and are demonstrably safe and effective. Enhanced weathering of silicate minerals has demonstrated a significant potential for CO2 capture and sequestration by the formation of pedogenic carbonates in soils, subsoils, and sediments. This technique has also been shown to deliver fruitful results in terms of improving soil health, and in turn plant health, through remineralization. The silicate minerals that possess the highest weathering rates (e.g., wollastonite), are relatively rare in nature, whereas the abundant ones (e.g., anorthite and forsterite) have a slower pace of weathering, especially in colder and drier climates such as found in the extensive agricultural lands of Western Canada and the Western United States. Herein, we offer a perspective on the opportunities for computational studies targeting atomic-scale interaction of CO2 with silicates and synthesis of fast-weathering silicates (such as larnite and bredigite), whose composition can be tuned to also support soil fertilization and remineralization, and whose production must be integrated with green and carbon-neutral technologies to ensure net-negative life cycle emissions.

Biomolecules from Serratia sp. CS1 indigenous to Ethiopian natural alkaline lakes: biosurfactant characteristics and assessment of compatibility in a laundry detergent.

In this study, the biosurfactants (Bio-SFs) producing bacteria are screened from the selected alkaline lake of Ethiopia, and the potential bacterial strain and their produced Bio-SFs are further characterized. In an initial screening, 25 bacterial isolates were isolated, and among those, the bacterial isolate assigned as CS1 was identified as the most potent producer of Bio-SFs using a subsequent characterization process. The CS1 strain was identified as Serratia sp. via biochemical and molecular methods. An emulsion index (E24) of 69.06 ± 0.11% was obtained for CS1 after 5days of incubation time at 30°C. The CS1-extracted Bio-SFs were characterized by Fourier transform infrared (FTIR), and it indicated that the type of biosurfactant produced was a glycolipid. The stability of the crude Bio-SFs was characterized, and the optimal conditions were found to be 80°C, pH 8, and 3% NaCl, respectively. The extracted Bio-SFs were compatible with tested commercial detergents, and its efficiency increased from 12.2 ± 0.1% to 67.1 ± 0.17% and 70.43 ± 0.11% when combined with commercially available detergent brands in Ethiopia such as Taza and Largo, respectively. This study suggests that the isolated S. marcescens CS1 strain has the potential to produce Bio-SFs that are viable competence to replace the use of synthetic chemicals in the production of commercial detergents.

Nutrient Thresholds Required to Control Eutrophication: Does It Work for Natural Alkaline Lakes?

The responses of phytoplankton to nutrients vary for different natural bodies of water, which can finally affect the occurrence of phytoplankton bloom. However, the effect of high alkalinity characteristic on the nutrient thresholds of natural alkaline lake is rarely considered. Bioassay experiments were conducted to investigate the nutrient thresholds and the responses of phytoplankton growth to nutrients for the closed plateau Chenghai Lake, Southwest China, which has a high pH background of up to 9.66. The growth of the phytoplankton community was restricted by phosphorus without obvious correlation with the input of nitrogen sources. This can be explained by the nitrogen fixation function of cyanobacteria, which can meet their growth needs for nitrogen. In addition, nitrate nitrogen (NO3-N) could be utilized more efficiently than ammonia nitrogen (NH4-N) for the phytoplankton in Chenghai Lake. Interestingly, the eutrophication thresholds of soluble reactive phosphorus (SRP), NH4-N, and NO3-N should be targeted at below 0.05 mg/L, 0.30 mg/L, and 0.50 mg/L, respectively, which are higher than the usual standards for eutrophication. This can be explained by the inhibition effect of the high pH background on phytoplankton growth due to the damage to phytoplankton cells. Therefore, the prevention of phytoplankton blooms should be considered from not only the aspect of reducing nutrient input, especially phosphorus input, but also maintaining the high alkalinity characteristic in natural alkaline lake, which was formed due to the geological background of saline-alkali soil.