Native-like Secondary Structure Research Articles

Extremophilic 50S Ribosomal RNA-Binding Protein L35Ae as a Basis for Engineering of an Alternative Protein Scaffold.

Due to their remarkably high structural stability, proteins from extremophiles are particularly useful in numerous biological applications. Their utility as alternative protein scaffolds could be especially valuable in small antibody mimetic engineering. These artificial binding proteins occupy a specific niche between antibodies and low molecular weight substances, paving the way for development of innovative approaches in therapeutics, diagnostics, and reagent use. Here, the 50S ribosomal RNA-binding protein L35Ae from the extremophilic archaea Pyrococcus horikoshii has been probed for its potential to serve as a backbone in alternative scaffold engineering. The recombinant wild type L35Ae has a native-like secondary structure, extreme thermal stability (mid-transition temperature of 90°C) and a moderate resistance to the denaturation by guanidine hydrochloride (half-transition at 2.6 M). Chemical crosslinking and dynamic light scattering data revealed that the wild type L35Ae protein has a propensity for multimerization and aggregation correlating with its non-specific binding to a model cell surface of HEK293 cells, as evidenced by flow cytometry. To suppress these negative features, a 10-amino acid mutant (called L35Ae 10X) was designed, which lacks the interaction with HEK293 cells, is less susceptible to aggregation, and maintains native-like secondary structure and thermal stability. However, L35Ae 10X also shows lowered resistance to guanidine hydrochloride (half-transition at 2.0M) and is more prone to oligomerization. This investigation of an extremophile protein’s scaffolding potential demonstrates that lowered resistance to charged chemical denaturants and increased propensity to multimerization may limit the utility of extremophile proteins as alternative scaffolds.

Anesthetic 2,2,2-trifluoroethanol induces amyloidogenesis and cytotoxicity in human serum albumin

Trifluoroethanol (TFE) mimics the membrane environments as it simulates the hydrophobic environment and better stabilizes the secondary structures in peptides owing to its hydrophobicity and hydrogen bond-forming properties. Its dielectric constant approximates that of the interior of proteins and is one-third of that of water. Human serum albumin (HSA) is a biological transporter. The effect of TFE on HSA gives the clue about the conformational changes taking place in HSA on transport of ligands across the biological membranes. At 25% (v/v) and 60% (v/v) TFE, HSA exhibits non-native β-sheet, altered tryptophan fluorescence, exposed hydrophobic clusters, increased thioflavin T fluorescence and prominent red shifted Congo red absorbance, and large hydrodynamic radii suggesting the aggregate formation. Isothermal titration calorimetric results indicate weak binding of TFE and HSA. This suggests that solvent-mediated effects dominate the interaction of TFE and HSA. TEM confirmed prefibrillar at 25% (v/v) and fibrillar aggregates at 60% (v/v) TFE. Comet assay of prefibrillar aggregates showed DNA damage causing cell necrosis hence confirming cytotoxic nature. On increasing concentration of TFE to 80% (v/v), HSA showed retention of native-like secondary structure, increased Trp and ANS fluorescence, a transition from β-sheet to α-helix. Thus, TFE at high concentration possess anti- aggregating potency.

A single freeze-thawing cycle for highly efficient solubilization of inclusion body proteins and its refolding into bioactive form.

BackgroundMild solubilization of inclusion bodies has attracted attention in recent days, with an objective to preserve the existing native-like secondary structure of proteins, reduce protein aggregation during refolding and recovering high amount of bioactive proteins from inclusion bodies.ResultsHere we presented an efficient method for mild solubilization of inclusion bodies by using a freeze-thawing process in the presence of low concentration of urea. We used two different proteins to demonstrate the advantage of this method over the traditional urea-denatured method: enhanced green fluorescent protein (EGFP) and the catalytic domain of human macrophage metalloelastase (MMP-12_CAT). Firstly, PBS buffer at pH 8 containing different molar concentration of urea (0-8 M) were used to solubilize EGFP and MMP-12-CAT inclusion bodies and the solubility achieved in 2 M urea in PBS buffer by freeze-thawing method was comparable to that of PBS buffer containing 8 M urea by traditional urea-denatured method. Secondly, different solvents were used to solubilize EGFP and MMP-12_CAT from inclusion bodies and the results indicated that a wide range of buffers containing 2 M urea could efficiently solubilize EGFP and MMP-12_CAT inclusion bodies by freeze-thawing method. Thirdly, the effect of pH and freezing temperature on the solubility of EGFP and MMP-12_CAT inclusion bodies were studied, revealing that solubilization of inclusion bodies by freeze-thawing method is pH dependent and the optimal freezing temperature indicated here is −20°C. Forth, the solubilized EGFP and MMP-12_CAT from inclusion bodies were refolded by rapid dilution and dialysis, respectively. The results showed that the refolded efficiency is much higher (more than twice) from freeze-thawing method than the traditional urea-denatured method. The freeze-thawing method containing 2 M urea also effectively solubilized a number of proteins as inclusion bodies in E.coli.ConclusionsMild solubilization of inclusion body proteins using the freeze-thawing method is simple, highly efficient and generally applicable. The method can be utilized to prepare large quantities of bioactive soluble proteins from inclusion bodies for basic research and industrial purpose.

Conformational behaviour and aggregation of chickpea cystatin in trifluoroethanol: Effects of epicatechin and tannic acid

Conformational alterations and aggregates of chickpea cystatin (CPC) were investigated upon sequential addition of trifluoroethanol (TFE) over a range of 0–70% v/v. CPC on 30% and 40% v/v TFE addition exhibited non-native β-sheet, altered intrinsic fluorescence, increased thioflavin T fluorescence, prominent red shifted shoulder peak in Congo red absorbance, and enhanced turbidity as well as Rayleigh scattering, suggesting the aggregate formation. TEM results confirmed the formation of fibrillar aggregates at 30% and 40% v/v TFE. On increasing concentration of TFE to 70% v/v, CPC showed retention of native-like secondary structure, increased intrinsic and ANS fluorescence. Thus our results show that favourable condition for fibrillation of CPC is in the range of 30–40% TFE. Moreover, anti-aggregational effects of polyphenols, epicatechin (EC) and tannic acid (TA) were analysed using ThT binding assay and other biophysical assays. EC and TA produced a concentration dependent decline in ThT fluorescence suggesting inhibition of the fibril formation. Furthermore, TA in comparison to EC, served as a more effective inhibitor against amyloid fibril formation of CPC. This work supports the universality of the amyloid-like aggregation not restricted to some special categories of protein and the fact that this aggregation can be prevented.

Transition of transferrin from native to fibrillar state: An implication for amyloid-linked diseases

Human transferrin (hTF), an α/β protein, transforms from its native soluble form to proto-fibrils and amyloid fibrils at 20% TFE after prolonged incubation. This type of amyloid fibrils is observed in a number of pathological disorders. Existence of dry molten-globule state, at 5% TFE, was characterized by native-like secondary structure, Trp fluorescence and negligible ANS binding, indicating its dry interior. At 15% TFE, decrease in Trp and increase in ANS fluorescence was observed with native-like secondary structure, indicating exposure to water molecule and hence, this was referred to as Wet MG state. AFM revealed protofibrils as smaller in size howbeit amyloid fibrils were long and stiffer in morphology. Amyloid fibrils were found to possess cross-linked β-sheet, lack of tertiary contacts, as revealed by CD and ATR-FTIR, enhanced Thioflavin T fluorescence and shift in Congo red absorbance. These results showed that formation of amyloid fibrils becomes favorable when protein is destabilized in suitable conditions and non-covalent interactions, particularly intermolecular hydrogen bonding becomes prominent. Protofibrils were genotoxic in nature albeit amyloid fibrils lack this effect.

An insight into the biophysical characterization of insoluble collagen aggregates: implication for arthritis.

Misfolding and aggregation of proteins is involved in some of the most prevalent neurodegenerative disorders. The importance of collagen stems from the fact that it is one of the dominant component used for tissue engineering and drug delivery applications and is a major component of skin, tendon, bone and other connective tissues. A systematic investigation on the conformation of collagen at various concentrations of glyoxal is studied by various biophysical techniques such as Trp fluorescence, ANS binding, Circular dichroism (CD), ATR-FTIR, Congo red (CR) assay, Rayleigh light scattering and Turbidity measurements. At 60% (v/v) glyoxal, collagen retains native-like secondary structure, altered Trp environment and high ANS fluorescence, characteristic of molten globule (MG) state. At 80% (v/v) glyoxal, insoluble collagen aggregates are detected as confirmed by decrease in Trp and ANS fluorescence, increase in non-native β sheet structure as evident from far-UV CD and FTIR spectra, increase in Thioflavin T fluorescence, Rayleigh light scattering, Turbidity measurements, as well as red shift in CR absorbance.

Protein Quantity on the Air–Solid Interface Determines Degradation Rates of Human Growth Hormone in Lyophilized Samples

Recombinant human growth hormone (rhGH) was lyophilized with various glass-forming stabilizers, employing cycles that incorporated various freezing and annealing procedures to manipulate glass formation kinetics, associated relaxation processes, and glass-specific surface areas (SSAs). The secondary structure in the cake was monitored by infrared and in reconstituted samples by circular dichroism. The rhGH concentrations on the surface of lyophilized powders were determined from electron spectroscopy for chemical analysis. Glass transition temperature (Tg ), SSAs, and water contents were determined immediately after lyophilization. Lyophilized samples were incubated at 323 K for 16 weeks, and the resulting extents of rhGH aggregation, oxidation, and deamidation were determined after rehydration. Water contents and Tg were independent of lyophilization process parameters. Compared with samples lyophilized after rapid freezing, rhGH in samples that had been annealed in frozen solids prior to drying, or annealed in glassy solids after secondary drying retained more native-like protein secondary structure, had a smaller fraction of the protein on the surface of the cake, and exhibited lower levels of degradation during incubation. A simple kinetic model suggested that the differences in the extent of rhGH degradation during storage in the dried state between different formulations and processing methods could largely be ascribed to the associated levels of rhGH at the solid-air interface after lyophilization.

Structural Characterization of IgG1 mAb Aggregates and Particles Generated Under Various Stress Conditions

IgG1 mAb solutions were prepared with and without sodium chloride and subjected to different environmental stresses. Formation of aggregates and particles of varying size was monitored by a combination of size-exclusion chromatography, Nanoparticle Tracking Analysis, Micro-flow Imaging (MFI), turbidity, and visual assessments. Stirring and heating induced the highest concentration of particles. In general, the presence of NaCl enhanced this effect. The morphology of the particles formed from mAb samples exposed to different stresses was analyzed from transmission electron microscopy and MFI images. Shaking samples without NaCl generated the most fibrillar particles, whereas stirring created largely spherical particles. The composition of the particles was evaluated for covalent cross-linking by SDS-PAGE, overall secondary structure by FTIR microscopy, and surface apolarity by extrinsic fluorescence spectroscopy. Freeze-thaw and shaking led to particles containing protein with native-like secondary structure. Heating and stirring produced IgG1-containing aggregates and particles with some non-native disulfide cross-links, varying levels of intermolecular beta sheet content, and increased surface hydrophobicity. These results highlight the importance of evaluating protein particle morphology and composition, in addition to particle number and size distributions, to better understand the effect of solution conditions and environmental stresses on the formation of protein particles in mAb solutions.

Spectroscopic studies of the unfolding of a multimeric protein α‐crystallin

α-Crystallin is a multimeric eye lens protein having molecular chaperone-like function which is crucial for lens transparency. The stability and unfolding-refolding properties of α-crystallin plays important roles for its function. We undertook a multi probe based fluorescence spectroscopic approach to explore the changes in the various levels of organization of this protein at different urea concentration. Steady state fluorescence studies reveal that at 0.6M urea a compact structural intermediate is formed which has a native-like secondary structure with enhanced surface exposure of hydrophobic groups. At 2.8M urea the tertiary interactions are largely collapsed with partial collapse of secondary and quaternary structure. The surface solvation probed by picosecond time resolved fluorescence of acrylodan labeled α-crystallin revealed dry native-like core of α-crystallin at 0.6M urea compared to enhanced water penetration at 2.8M urea and extensive solvation at 6M urea. Activation energy for the subunit exchange decreased by 22 kJ mol(-1) on changing urea concentration from 0 to 0.6M compared with over 75 kJ mol(-1) on changing urea concentration from 0 to 2.8M. Light scattering and analytical ultracentrifugation techniques were used to determine size and oligomerization of the unfolding intermediates. The data indicated swelling but no oligomer breakdown at 0.6M urea. At 2.8M urea the oligomeric size is considerably reduced and a monomer is produced at 6M urea. The data clearly reveals that structural breakdown of α-crystallin does not follow hierarchical sequence as tertiary structure dissolution takes place before complete oligomeric dissociation.

Effect of pressure on refolding of recombinant pentameric cholera toxin B

The production of recombinant proteins is an essential tool for the expansion of modern biological research and biotechnology. The expression of heterologous proteins in Escherichia coli often results in an incomplete folding process that leads to the accumulation of inclusion bodies (IB), aggregates that hold a certain degree of native-like secondary structure. High hydrostatic pressure (HHP) impairs intermolecular hydrophobic and electrostatic interactions, leading to dissociation of aggregates under non-denaturing conditions and is therefore a useful tool to solubilize proteins for posterior refolding. Cholera toxin (CT) is composed of a non-toxic pentamer of B subunits (CTB), a useful adjuvant in vaccines, and a toxic subunit A (CTA). We studied the process of refolding of CTB using HHP. HHP was shown to be effective for dissociation of CTB monomers from IB. Posterior incubation at atmospheric pressure of concentrated CTB (1mg/ml) is necessary for the association of the monomers. Pentameric CTB was obtained when suspensions of CTB IB were compressed at 2.4kbar for 16h in the presence of Tween 20 and incubated at 1bar for 120h. Soluble and biologically active pentameric CTB was obtained, with a yield of 213mg CTB/liter of culture. The experience gained in this study can be important to improve the refolding of proteins with quaternary structure.

Revisiting Structural Hieracrchy: A Fluorescence Investigation of Unfolding of an Oligomeric Protein

α-crystallin is a multimeric lens protein with chaperone-like function and is responsible for maintaining lens transparency. The structural stability and unfolding-refolding properties of this protein are believed to be important for its function. We undertook a multi-probe based fluorescence approach to explore the changes in the various levels of organization of α-crystallin at different urea concentration region. Steady-state fluorescence emission and quenching studies using extrinsic and intrinsic fluorescence probes reveal that at 0.6 M urea a compact structural intermediate is formed which has a native-like secondary structure with minimal yet detectable tertiary structure perturbation associated with enhanced surface exposure of hydrophobic groups, possibly arising from interfacial structure meltdown. At 2.8 M urea the tertiary interactions undergo almost complete collapse with partial disintegration of secondary and quaternary structure. Investigation of surface solvation with picosecond resolved fluorescence transients of acrylodan covalently tagged to α-crystallin reveals a dry native-like core of α-crystallin at 0.6 M urea compared to enhanced water penetration at 2.8 M urea and extensive solvation at 6 M urea. Temperature dependent subunit exchange kinetics reveal decrease of activation energy for the subunit exchange process by 22 kJ mol-1 on changing urea concentration from 0 to 0.6 M compared to over 75 kJ mol-1 on changing urea concentration from 0 to 2.8 M. Dynamic light scattering study indicates swelling at 0.6 M urea, however oligomerization is retained as observed from sedimentation equilibrium experiment. At 2.8 M urea the oligomeric size is reduced and a monomer is produced at 6 M urea. These data clearly demonstrates that tertiary structure dissolution precedes oligomeric degradation. Such non-hierarchical structure dissolution indicates the possibility of tertiary contact formation to be a rather later folding event in case of large oligomeric proteins likes α-Crystallin.

The effect of temperature on protein refolding at high pressure: Enhanced green fluorescent protein as a model

The application of high hydrostatic pressure (HHP) impairs electrostatic and hydrophobic intermolecular interactions, promoting the dissociation of recombinant inclusion bodies (IBs) under mild conditions that favor subsequent protein refolding. We demonstrated that IBs of a mutant version of green fluorescent protein (eGFP F64L/S65T), produced at 37°C, present native-like secondary and tertiary structures that are progressively lost with an increase in bacterial cultivation temperature. The IBs produced at 37°C are more efficiently dissociated at 2.4kbar than those produced at 47°C, yielding 25 times more soluble, functional eGFP after the lower pressure (0.69kbar) refolding step. The association of a negative temperature (−9°C) with HHP enhances the efficiency of solubilization of IBs and of eGFP refolding. The rate of refolding of eGFP as temperature increases from 10°C to 50°C is proportional to the temperature, and a higher yield was obtained at 20°C. High level refolding yield (92%) was obtained by adjusting the temperatures of expression of IBs (37°C), of their dissociation at HHP (−9°C) and of eGFP refolding (20°C). Our data highlight new prospects for the refolding of proteins, a process of fundamental interest in modern biotechnology.

Molten Globule of Hemoglobin Proceeds into Aggregates and Advanced Glycated End Products

Conformational alterations of bovine hemoglobin (Hb) upon sequential addition of glyoxal over a range of 0–90% v/v were investigated. At 20% v/v glyoxal, molten globule (MG) state of Hb was observed by altered tryptophan fluorescence, high ANS binding, existence of intact heme, native-like secondary structure as depicted by far-UV circular dichroism (CD) and ATR-FTIR spectra as well as loss in tertiary structure as confirmed by near-UV CD spectra. In addition, size exclusion chromatography analysis depicted that MG state at 20% v/v glyoxal corresponded to expanded pre-dissociated dimers. Aggregates of Hb were detected at 70% v/v glyoxal. These aggregates of Hb had altered tryptophan environment, low ANS binding, exposed heme, increased β-sheet secondary structure, loss in tertiary structure, enhanced thioflavin T (ThT) fluorescence and red shifted Congo Red (CR) absorbance. On incubating Hb with 30% v/v glyoxal for 0–20 days, advanced glycation end products (AGEs) were detected on day 20. These AGEs were characterised by enhanced tryptophan fluorescence at 450 nm, exposure of heme, increase in intermolecular β-sheets, enhanced ThT fluorescence and red shift in CR absorbance. Comet assay revealed aggregates and AGEs to be genotoxic in nature. Scanning electron microscopy confirmed the amorphous structure of aggregates and branched fibrils of AGEs. The transformation of α-helix to β-sheet usually alters the normal protein to amyloidogenic resulting in a variety of protein conformational disorders such as diabetes, prion and Huntington's.

Distinct β-Sheet Structure in Protein Aggregates Determined by ATR–FTIR Spectroscopy

Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) was used to study the conformation of aggregated proteins in vivo and in vitro. Several different protein aggregates, including amyloid fibrils from several peptides and polypeptides, inclusion bodies, folding aggregates, soluble oligomers, and protein extracts from stressed cells, were examined in this study. All protein aggregates demonstrate a characteristic new β structure with lower-frequency band positions. All protein aggregates acquire this new β band following the aggregation process involving intermolecular interactions. The β sheets in some proteins arise from regions of the polypeptide that are helical or non β in the native conformation. For a given protein, all types of the aggregates (e.g., inclusion bodies, folding aggregates, and thermal aggregates) showed similar spectra, indicating that they arose from a common partially folded species. All of the aggregates have some nativelike secondary structure and nonperiodic structure as well as the specific new β structure. The new β could be most likely attributed to stronger hydrogen bonds in the intermolecular β-sheet structure present in the protein aggregates.

Folding of Top7 in unbiased all‐atom Monte Carlo simulations

For computational studies of protein folding, proteins with both helical and β-sheet secondary structure elements are very challenging, as they expose subtle biases of the physical models. Here, we present reproducible folding of a 92 residue α/β protein (residues 3-94 of Top7, PDB ID: 1QYS) in computer simulations starting from random initial conformations using a transferable physical model which has been previously shown to describe the folding and thermodynamic properties of about 20 other smaller proteins of different folds. Top7 is a de novo designed protein with two α-helices and a five stranded β-sheet. Experimentally, it is known to be unusually stable for its size, and its folding transition distinctly deviates from the two-state behavior commonly seen in natural single domain proteins. In our all-atom implicit solvent parallel tempering Monte Carlo simulations, Top7 shows a rapid transition to a group of states with high native-like secondary structure, and a much slower subsequent transition to the native state with a root mean square deviation of about 3.5 Å from the experimentally determined structure. Consistent with experiments, we find Top7 to be thermally extremely stable, although the simulations also find a large number of very stable non-native states with high native-like secondary structure.

Botulinum neurotoxin: unique folding of enzyme domain of the most-poisonous poison

Botulinum neurotoxin (BoNT), the most toxic substance known to mankind, is the first example of the fully active molten globule state. To understand its folding mechanism, we performed urea denaturation experiments and theoretical modeling using BoNT serotype A (BoNT/A). We found that the extent of BoNT/A denaturation from the native state (N) shows a nonmonotonic dependence on urea concentration indicating a unique multistep denaturation process, N → I1 I2 U, with two intermediate states I1 and I2. BoNT/A loses almost all its secondary structure in 3.75 M urea (I1), yet it displays a native-like secondary structure in 5 M urea (I2). This agrees with the results of theoretical modeling, which helped to determine the molecular basis of unique behavior of BoNT/A in solution. Except for I2, all the states revert back to full enzymatic activity for SNAP-25 including the unfolded state U stable in 7 M urea. Our results stress the importance of structural flexibility in the toxin’s mechanism of survival and action, an unmatched evolutionary trait from billion-year-old bacteria, which also correlates with the long-lasting enzymatic activity of BoNT inside neuronal cells. BoNT/A provides a rich model to explore protein folding in relation to functional activity.

Effect of single-point mutations on the stability and immunogenicity of a recombinant ricin A chain subunit vaccine antigen

There is great interest in the design and development of highly thermostable and immunogenic protein subunit vaccines for biodefense. In this study, we used two orthogonal and complementary computational protein design approaches to generate a series of single-point mutants of RiVax, an attenuated recombinant ricin A chain (RTA) protein subunit vaccine antigen. As assessed by differential scanning calorimetry, the conformational stabilities of the designed mutants ranged from 4°C less stable to 4.5°C more stable than RiVax, depending on solution pH. Two more thermostable (V18P, C171L) and two less thermostable (T13V, S89T) mutants that displayed native-like secondary and tertiary structures (as determined by circular dichroism and fluorescence spectral analysis, respectively) were tested for their capacity to elicit RTA-specific antibodies and toxin-neutralizing activity. Following a prime-boost regimen, we found qualitative differences with respect to specific antibody titers and toxin neutralizing antibody levels induced by the different mutants. Upon a second boost with the more thermostable mutant C171L, a statistically significant increase in RTA-specific antibody titers was observed when compared with RiVax-immunized mice. Notably, the results indicate that single residue changes can be made to the RiVax antigen that increase its thermal stability without adversely impacting the efficacy of the vaccine.

Detection and analysis of protofibrils and fibrils of hemoglobin: Implications for the pathogenesis and cure of heme loss related maladies

TFE induces structural alterations of proteins similar to the lipid environment of biological membranes, implicating these studies worthy of analyzing protein conformation in membranes such as red blood cells (RBCs). Heme loss occurs on rupturing of RBCs as found in diseases namely haemophilia, haemolytic anaemia, diabetes mellitus. TFE can be implied in discovering therapeutic targets, as it mimics the biological membrane environment. A global transition of hemoglobin (Hb) in presence of TFE was studied by using multi-methodological approach. The presence of partially folded state of Hb at 15% v/v TFE was confirmed by altered tryptophan environment, and retention of native-like secondary and tertiary structure. Molten globule state was observed at 20% v/v TFE as detected by increase tryptophan and high ANS fluorescence, slight alterations in Soret band relative to native. TFE on increasing concentration induced protofibrils at 25% v/v and fibrils at 45% v/v as depicted by altered tryptophan environment, heme loss, increase in non-native β-sheet secondary and tertiary structure, large hydrodynamic radii of heme-protein, high ANS, thioflavin T fluorescence and shift in Congo Red absorbance. Comet assay showed that protofibrils are cytotoxic to lymphocytes. SEM and XRD confirmed these aggregates to be fibrillar in nature.

Chemical and Enzymatic Site Specific PEGylation of hGH

Several strategies for site-specific PEGylation have been successfully exploited to conjugate poly(ethylene glycol) (PEG) to pharmaceutical proteins. The advantages sought are those of improving efficacy and increasing the half-life of conjugated proteins while achieving a higher degree of homogeneity. Recombinant human growth hormone (hGH) was thus PEGylated exploiting two site-specific strategies: N-terminal PEGylation using the PEG20 kDa-aldehyde polymer and microbial transglutaminase (mTGase) mediated enzymatic PEGylation using PEG20 kDa-NH2. N-Terminal PEGylation of hGH was carried out by covalent attachment of PEG to the α-amine residue of Phe1 that yielded the monoconjugate PEG-Nter-hGH with a mass of 44152.2 Da, as measured by MALDI-TOF mass spectrometry. The mTGase mediated PEGylation, performed in a water/ethanol solution mixture, allowed a PEG coupling reaction only at the level of hGH Gln141, yielding the single monoconjugate PEG-Gln141-hGH with a mass of 44064.9 Da. Circular dichroism studies showed that both conjugation strategies preserved the native-like secondary structures of hGH. It is vital to maintain the structural integrity of hGH if PEGylated hGH is to be used in therapeutic applications. As expected, the pharmacokinetic profile in rats of PEG-Nter-hGH and PEG-Gln141-hGH revealed a significant increase in systemic exposure with respect to unmodified hGH. The conjugates showed a half-life increase of 4.5-fold with respect to hGH. These results demonstrate that both chemical and enzymatic site-selective PEGylation of hGH generates conjugates with a prolonged half-life.

Role of histidine 148 in stability and dynamics of a highly fluorescent GFP variant

The armory of GFP mutants available to biochemists and molecular biologists is huge. Design and selection of mutants are usually driven by tailored spectroscopic properties, but some key aspects of stability, folding and dynamics of selected GFP variants still need to be elucidated. We have prepared, expressed and characterized three H148 mutants of the highly fluorescent variant GFPmut2. H148 is known to be involved in the H-bonding network surrounding the chromophore, and all the three mutants, H148G, H148R and H148K, show increased pKa values of the chromophore. Only H148G GFPmut2 (Mut2G) gave good expression and purification yields, indicating that position 148 is critical for efficient folding in vivo. The chemical denaturation of Mut2G was monitored by fluorescence emission, absorbance and far-UV circular dichroism spectroscopy. The mutation has little effect on the spectroscopic properties of the protein and on its stability in solution. However, the unfolding kinetics of the protein encapsulated in wet nanoporous silica gels, a system that allows to stabilize conformations that are poorly or only transiently populated in solution, indicate that the unfolding pathway of Mut2G is markedly different from the parent molecule. In particular, encapsulation allowed to identify an unfolding intermediate that retains a native-like secondary structure despite a destructured chromophore environment. Thus, H148 is a critical residue not only for the chromophoric and photodynamic properties, but also for the correct folding of GFP, and its substitution has great impact on expression yields and stability of the mature protein.