Native Collagen Research Articles

Hydrolyzed Versus Native Collagen in Management of Acute Surgical Wounds: A Literature Review

Hydrolyzed Versus Native Collagen in Management of Acute Surgical Wounds: A Literature Review

The diazirine-mediated photo-crosslinking of collagen improves biomaterial mechanical properties and cellular interactions

In tissue engineering, crosslinking with carbodiimides such as EDC is omnipresent to improve the mechanical properties of biomaterials. However, in collagen biomaterials, EDC reacts with glutamate or aspartate residues, inactivating the binding sites for cellular receptors and rendering collagen inert to many cell types. In this work, we have developed a crosslinking method that ameliorates the rigidity, stability, and degradation rate of collagen biomaterials, whilst retaining key interactions between cells and the native collagen sequence. Our approach relies on the UV-triggered reaction of diazirine groups grafted on lysines, leaving critical amino acid residues intact. Notably, GxxGER recognition motifs for collagen-binding integrins, ablated by EDC crosslinking, were left unreacted, enabling cell attachment, spreading, and colonization on films and porous scaffolds. In addition, our procedure conserves the architecture of biomaterials, improves their resistance to collagenase and cellular contraction, and yields material stiffness akin to that obtained with EDC. Importantly, diazirine-crosslinked collagen can host mesenchymal stem cells, highlighting its strong potential as a substrate for tissue repair. We have therefore established a new crosslinking strategy to modulate the mechanical features of collagen porous scaffolds without altering its biological properties, thereby offering an advantageous alternative to carbodiimide treatment. Statement of significanceThis article describes an approach to improve the mechanical properties of collagen porous scaffolds, without impacting collagen's natural interactions with cells. This is significant because collagen crosslinking is overwhelmingly performed using carbodiimides, which results in a critical loss of cellular affinity. By contrast, our method leaves key cellular binding sites in the collagen sequence intact, enabling cell-biomaterial interactions. It relies on the fast, UV-triggered reaction of diazirine with collagen, and does not produce toxic by-products. It also supports the culture of mesenchymal stem cells, a pivotal cell type in a wide range of tissue repair applications. Overall, our approach offers an attractive option for the crosslinking of collagen, a prominent material in the growing field of tissue engineering.

The Influence of Gamma Radiation on Different Gelatin Nanofibers and Gelatins.

Gelatin nanofibers are known as wound-healing biomaterials due to their high biocompatible, biodegradable, and non-antigenic properties compared to synthetic-polymer-fabricated nanofibers. The influence of gamma radiation doses on the structure of gelatin nanofiber dressings compared to gelatin of their origin is little known, although it is very important for the production of stable bioactive products. Different-origin gelatins were extracted from bovine and donkey hides, rabbit skins, and fish scales and used for fabrication of nanofibers through electrospinning of gelatin solutions in acetic acid. Nanofibers with sizes ranging from 73.50 nm to 230.46 nm were successfully prepared, thus showing the potential of different-origin gelatin by-products valorization as a lower-cost alternative to native collagen. The gelatin nanofibers together with their origin gelatins were treated with 10, 20, and 25 kGy gamma radiation doses and investigated for their structural stability through chemiluminescence and FTIR spectroscopy. Chemiluminescence analysis showed a stable behavior of gelatin nanofibers and gelatins up to 200 °C and increased chemiluminescent emission intensities for nanofibers treated with gamma radiation, at temperatures above 200 °C, compared to irradiated gelatins and non-irradiated nanofibers and gelatins. The electron paramagnetic (EPR) signals of DMPO adduct allowed for the identification of long-life HO● radicals only for bovine and donkey gelatin nanofibers treated with a 20 kGy gamma radiation dose. Microbial contamination with aerobic microorganisms, yeasts, filamentous fungi, Staphylococcus aureus, Escherichia coli, and Candida albicans of gelatin nanofibers treated with 10 kGy gamma radiation was under the limits required for pharmaceutical and topic formulations. Minor shifts of FTIR bands were observed at irradiation, indicating the preservation of secondary structure and stable properties of different-origin gelatin nanofibers.

Dialdehyde Starch as a Cross-Linking Agent Modifying Fish Collagen Film Properties.

The aim of this research was the modification of fish collagen films with various amounts of dialdehyde starch (DAS). Film properties were examined before and after the cross-linking process by DAS. Prepared biopolymer materials were characterized by Fourier Transform Infrared Spectroscopy and Atomic Force Microscopy. Moreover, the mechanical, thermal and swelling properties of the films were evaluated and the contact angle was measured. Research has shown that dialdehyde starch applied as a cross-linking agent influences collagen film properties. Mechanical testing indicated a decrease in Young's Modulus and an increase in breaking force, elongation at break, and tensile strength parameters. Results for contact angle were significantly higher for collagen films cross-linked with DAS; thus, the hydrophilicity of samples decreased. Modified samples presented a lower swelling degree in PBS than native collagen films. However, the highest values for the degree of swelling among the modified specimens were obtained from the 1% DAS samples, which were 717% and 702% for 1% and 2% collagen, respectively. Based on AFM images and roughness values, it was noticed that DAS influenced collagen film surface morphology. The lowest value of Rq was observed for 2%Coll_2%DAS and was approximately 10 nm. Analyzing thermograms for collagen samples, it was observed that pure collagen samples were less thermally stable than cross-linked ones. Dialdehyde starch is a promising cross-linking agent for collagen extracted from fish skin and may increase its applicability.

Collagen type I mimicking peptide additives to functionalize synthetic supramolecular hydrogels

Small bioactive peptide sequences derived from extracellular matrix proteins possess the ability to interact with cell receptors. As such, these peptide additives are excellent mimics to develop materials for 3D cell culture. Two types of supramolecular modified collagen type I mimicking peptide additives are presented; UPy-GFOGER (39 amino acids), with a novel superstructure, and the more simplistic UPy-DGEA (7 amino acids). Here, we studied the impact of the conformational differences between both peptide additives, on their biological performance. Various analyzing techniques demonstrated the ability of the supramolecular UPy-GFOGER to self-assemble into short nanofibers with brush-like outer features, suggesting trimerization into a triple helix. UPy-DGEA is a short additive without a complex structure. Since, collagen type I is a major component of the human corneal stroma, primary keratocytes (PKs) are encapsulated within the functionalized hydrogels to provide insights in the induced bioactivity of both additives. Incorporation of UPy-GFOGER supported an elongated morphology and (re-)differentiation of the encapsulated PKs, while tiny round-shaped cells were observed within the hydrogels functionalized with UPy-DGEA. This difference in biological success between UPy-GFOGER and UPy-DGEA indicates the difficulty of using short peptide additives without a complex structure to mimic the complex structure of natural collagen.

Recombinant Human Collagen Type III Improves Hypertrophic Scarring by Regulating the Ratio of Type I/III Collagen.

Hypertrophic scar development is a complication associated with wound healing, impacting local appearance and function. The type I/III collagen ratio affects the extent of hypertrophic scarring; a reduced ratio can ameliorate this. In this study, recombinant human collagen type III was developed. Liquid chromatography-tandem mass spectrometry was used to determine its amino acid sequence and confirm its high level of homology with natural human type III collagen. Recombinant human collagen type III displayed no cytotoxicity and did not confer skin irritation and sensitization. Immunofluorescence and western blot analyses of histidine following incubation with fibroblasts suggested cell entry of recombinant human collagen type III. Furthermore, recombinant human collagen type III promoted the synthesis of the natural type III collagen in fibroblasts, resulting in a more obvious increase of type III collagen content in fibroblasts than that of type I collagen, and then decreased the ratio of type I/III collagen. The results of 5-ethynyl-2'-deoxyuridine staining assay suggested enhanced fibroblast proliferation. Following local injection of recombinant human collagen type III, rabbit ear scarring was significantly reduced after 60 days. Vancouver Scar Scale evaluation showed that all index scores were significantly reduced. Western blotting and Picro-Sirius red staining showed that the natural type III collagen increase in scar tissue was greater than that of type I collagen, decreasing the type I/III ratio. In summary, recombinant human collagen type III can be taken up by fibroblasts and promote natural collagen synthesis-especially that of type III-thereby reducing the type I/III ratio and improving hypertrophic scarring.

3D bioprinting of mouse pre-osteoblasts and human MSCs using bioinks consisting of gelatin and decellularized bone particles

One of the key challenges in biofabrication applications is to obtain bioinks that provide a balance between printability, shape fidelity, cell viability, and tissue maturation. Decellularization methods allow the extraction of natural extracellular matrix, preserving tissue-specific matrix proteins. However, the critical challenge in bone decellularization is to preserve both organic (collagen, proteoglycans) and inorganic components (hydroxyapatite) to maintain the natural composition and functionality of bone. Besides, there is a need to investigate the effects of decellularized bone (DB) particles as a tissue-based additive in bioink formulation to develop functional bioinks. Here we evaluated the effect of incorporating DB particles of different sizes (≤45 and ≤100 μm) and concentrations (1%, 5%, 10% (wt %)) into bioink formulations containing gelatin (GEL) and pre-osteoblasts (MC3T3-E1) or human mesenchymal stem cells (hTERT-MSCs). In addition, we propose a minimalistic bioink formulation using GEL, DB particles and cells with an easy preparation process resulting in a high cell viability. The printability properties of the inks were evaluated. Additionally, rheological properties were determined with shear thinning and thixotropy tests. The bioprinted constructs were cultured for 28 days. The viability, proliferation, and osteogenic differentiation capacity of cells were evaluated using biochemical assays and fluorescence microscopy. The incorporation of DB particles enhanced cell proliferation and osteogenic differentiation capacity which might be due to the natural collagen and hydroxyapatite content of DB particles. Alkaline phosphatase activity is increased significantly by using DB particles, notably, without an osteogenic induction of the cells. Moreover, fluorescence images display pronounced cell-material interaction and cell attachment inside the constructs. With these promising results, the present minimalistic bioink formulation is envisioned as a potential candidate for bone tissue engineering as a clinically translatable material with straightforward preparation and high cell activity.

A Transparent and Injectable Biomaterial Prepared by Mixing Collagen and Anti-Cancer Platinum Derivatives.

This study presents the synthesis of a cross-linked collagen material, named platinum-containing collagen gel (PCG), which is achieved by simply mixing collagen and derivatives of an anti-cancer platinum complex. The cross-linking reagents are derivatives of cisplatin or transplatin, generated through a ligand exchange with dimethyl sulfoxide. PCG exhibits superior physical strength and transparency compared with the native collagen gel formed through spontaneous fibril formation. The versatility of PCG as a cell culture scaffold, applicable to both 2D and 3D models, with low cytotoxicity is demonstrated. Furthermore, PCG exhibits pH-responsive gel-forming properties. This enables the removal of free cross-linker by dialysis in an acidic solution and subsequent gel formation upon neutralization. This material holds promise for application in cell culture scaffolds and medical injections.

Potential of Collagen/PLA-based Nanofibrous Scaffold to Support PC12 Cells and Neural Repair

Objective: This study attempts to modify Polylactic Acid (PLA) with the natural polymer Collagen (Coll), to develop materials such as an electrospun scaffold that have better mechanical stability and biocompatibility. Retinoic acid (RA), a bioactive material that promotes nerve growth, is to be added to the nanofiber scaffolds as part of this project.
 Methods: One of the most important methods we employed in this work to create nanofibrous scaffolds was electrospinning.
 Results: The synthesized nanofiber scaffold exhibited a diameter of 255±40 nm and a tensile strength of 175±10.4 N, providing sufficient support for native peripheral nerve repair. The inclusion of Coll enhanced the scaffold's hydrophilic behavior (contact angle: 56±4°), ensuring stability in aqueous solutions. In addition, cell adhesion and proliferation are demonstrated to be improved by PLA composite nanofibers based on Collagen, while PC12 cell adhesion and proliferation are further improved by RA.
 Conclusion: Based on their biodegradability, robust mechanical properties, and porous structure, these scaffolds are excellent choices for nerve tissue engineering, according to our findings. The significant increase in PC12 cells' adhesion and proliferation upon the addition of RA demonstrates the cells' potential for nerve repair.

Natural Polymer‐Based Materials for Wound Healing Applications

Skin injuries pose significant health challenges, with conditions like burns and diabetic, venous, and pressure ulcers presenting complex wound management scenarios. Effective wound care strategies for these injuries encompass a range of interventions, from simple wound dressings to bioactive materials and surgical procedures involving skin substitutes and skin grafting. This review explores the potential of natural polymers, including silk, collagen, gelatin, elastin, cellulose, chitosan, alginate, and hyaluronic acid, in wound management. Natural polymers offer several advantages, including abundance, biodegradability, and compatibility with traditional and modern material fabrication techniques, and have demonstrated safety and efficacy in clinical applications, modulating various facets of the wound healing process. Highlighting preclinical and clinical studies, along with commercial products, this review showcases the versatility and utility of natural polymers in wound management and provides insights into emerging developments, such as 3D bioprinting and stimuli‐responsive materials, which hold promise for personalized wound treatments. Additionally, we discuss the importance of the material format and morphology in engineering the next generation of wound dressings and skin substitutes, offering a pathway to optimize natural polymers for enhanced wound healing outcomes.

Effects of Ultrasonic Power on the Structure and Rheological Properties of Skin Collagen from Albacore (Thunnus alalunga).

The effects of ultrasonic power (0, 150, 300, 450, and 600 W) on the extraction yield and the structure and rheological properties of pepsin-soluble collagen (PSC) from albacore skin were investigated. Compared with the conventional pepsin extraction method, ultrasonic treatment (UPSC) significantly increased the extraction yield of collagen from albacore skin, with a maximum increase of 8.56%. The sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis revealed that peptides of low molecular weight were produced when the ultrasonic power exceeded 300 W. Meanwhile, secondary structure, tertiary structure, and X-ray diffraction analyses showed that the original triple helix structure of collagen was intact after the ultrasonic treatment. The collagen solutions extracted under different ultrasonic powers had significant effects on the dynamic frequency sweep, but a steady shear test suggested that the collagen extracted at 150 W had the best viscosity. These results indicate that an ultrasonic power between 150 and 300 W can improve not only the extraction yield of natural collagen, but also the rheological properties of the collagen solution without compromising the triple helix structure.

The impact of N-terminal modification of PAA with different chain lengths on the structure, thermal stability and pH sensitivity of succinylated collagen

The limitations of native collagen, such as thermal stability and solubility in physiological environments, can be improved by applying bioconjugation and synthetic chemistry techniques. However, the exquisite control of the modification site of collagen remains a challenge. In this work, pH-responsive poly(acrylic acid) (PAA) with different chain lengths was attached to the N-terminal α-amino groups of succinylated collagen using a site-specific modification strategy. Additionally, the structure, thermal stability, and pH sensitivity of succinylated collagen were explored. The modification rate of amino groups in the succinylated collagen-PAA bioconjugate (SPSC-PAA) was evaluated by the 2,4,6-trinitrobenzene sulfonic acid assay. The impact of N-terminal modification of PAA and its chain length on the thermal stability of collagen was explored by CD and DSC. These techniques revealed that the thermal stability of SPSC-Col is pH-responsive and closely related to the chain length of grafted PAA. The pH sensitivity of SPSC-PAA was further explored by rheology and turbidity. Subsquently, the critical pH and isoelectric point of SPSC-PAAs were also examined by turbidity and isoelectric point titration, respectively. This work provides a new insight into the N-terminal modification of collagen on its properties.Graphical abstract

Native collagen VI delays early muscle stem cell differentiation.

Adult muscle stem cells (MuSCs) are critical for muscle homeostasis and regeneration, and their behavior relies on a finely regulated niche made of specific extracellular matrix (ECM) components and soluble factors. Among ECM proteins, collagen VI (Col6) influences the mechanical properties of the niche and, in turn, MuSC self-renewal capabilities. Here, we investigated whether Col6 can exert a direct function as a biochemical signal for regulating the stemness and differentiation of murine MuSCs and myoblasts. Native Col6, but not its pepsin-resistant fragment, counteracts the early differentiation of myogenic cells by reducing the expression of differentiation marker genes and preserving stemness features, with inhibition of the canonical Wnt pathway. Our data indicate that extracellular Col6 acts as a soluble ligand in delaying early myogenic differentiation by regulating intracellular signals involved in adult myogenesis.

First person – Samuele Metti

ABSTRACT First Person is a series of interviews with the first authors of a selection of papers published in Journal of Cell Science, helping researchers promote themselves alongside their papers. Samuele Metti is co-first author on ‘ Native collagen VI delays early muscle stem cell differentiation’, published in JCS. Samuele conducted the research described in this article while a PhD student in Prof. Paolo Bonaldo's lab at University of Padova, Italy. He is now a postdoc in the lab of Prof. Gisou van der Goot at School of Life Science, École Polytechnique Fédérale de Lausanne, Switzerland, investigating how extracellular matrix proteins affect muscle stem cell behaviour.

In vivo soft tissue regenerative potential of flax seed mucilage self-assembled collagen aerogels

The present study demonstrates the in vivo soft tissue regenerative potential of flax seed mucilage (FSM) reinforced collagen aerogels in Wistar rats. The physiochemical, mechanical, and thermal properties were significantly improved upon the incorporation of flax mucilage into collagen when compared to the native collagen scaffold. In addition, the functional group of flax mucilage notably contributed to a better anti-oxidative potential than the control collagen. The flax mucilage-reinforced collagen at 4 mg ml−1 concentration showed a 2-fold increase in porosity compared to native collagen. The tensile strength of native collagen, 2 mg ml−1, and 4 mg ml−1 FSM reinforced collagen was 5.22 MPa, 9.76 MPa, and 11.16 MPa, respectively, which indicated that 2 mg ml−1 and 4 mg ml−1 FSM showed an 87% and 113% percentage increase respectively in tensile strength compared to the native collagen control. FSM-reinforced biomatrix showed 97% wound closure on day 15 post-wounding, indicating faster healing than controls, where complete healing occurred only on day 21. The mechanical properties of skin treated with FSM-reinforced collagen scaffold post-healing were considerably better than native collagen. The histological and immunohistochemistry analysis also showed complete restoration of wounded tissue like intact normal skin. The findings paved the way for the development of collagen-polysaccharide mucilage wound dressing materials and their further application in skin tissue engineering.

Native collagen sheet mask improves skin health and appearance: A comprehensive clinical evaluation.

Collagen, a critical structural protein found abundantly in animal skin and bones, has become increasingly recognized for its potential therapeutic role in skincare. Despite growing interest, the scientific evidence for the efficacy of collagen sheet masks remains limited. The principal objective of our study was to provide insights into the multifaceted role of collagen in skin health, with a specific focus on its application in collagen sheet masks. The effects of a collagen sheet mask consisting of >92% native bovine collagen were investigated. The soluble protein components of the collagen matrix were analyzed and the influence of soluble collagen components on fibroblast regulation was examined. Scanning Electron Microscope (SEM) analysis was performed for structural analysis and effect on irritated skin. Five different clinical studies were conducted, including a comparison of the diversity of the skin microbiome, the tolerance and local irritating reactions in atopic dermatitis, an evaluation of skin redness after UV radiation, wrinkle reduction, and hydration and skin roughness of the collagen mask in comparison to a pre-soaked cellulose sheet mask. The collagen mask contains soluble protein components, including small collagen peptides. The mask showed potential for promoting fibroblast activity. SEM analysis showed a native collagen structure similar to human dermis. The mask maintained the skin microbiome diversity and decreased skin pH levels. It demonstrated good tolerability on both intact and lesional skin and had a significant effect in reducing erythema caused by UV radiation compared to other skincare products. It showed significant improvements in skin hydration and the volume of eye wrinkles and was more effective than pre-soaked cellulose sheet masks. Collagen sheet masks have the potential to positively impact skin health and appearance by increasing hydration, reducing erythema, minimizing wrinkles, and maintaining a healthy skin microbiome and skin barrier.

Photo-induced universal modification of small-diameter decellularized blood vessels with a hemocompatible peptide improves in vivo patency

Decellularized vessels (DVs) have the potential to serve as available grafts for small-diameter vascular (<6 mm) reconstruction. However, the absence of functional endothelia makes them likely to trigger platelet aggregation and thrombosis. Luminal surface modification is an efficient approach to prevent thrombosis and promote endothelialization. Previously, we identified a hemocompatible peptide, HGGVRLY, that showed endothelial affinity and antiplatelet ability. By conjugating HGGVRLY with a phenylazide group, we generated a photoreactive peptide that can be modified onto multiple materials, including non-denatured extracellular matrices. To preserve the natural collagen of DVs as much as possible, we used a lower ultrahydrostatic pressure than that previously reported to prepare decellularized grafts. The photoreactive HGGVRLY peptide could be modified onto DV grafts via UV exposure for only 2 min. Modified DVs showed improved endothelial affinity and antiplatelet ability in vitro. When rat abdominal aortas were replaced with DVs, modified DVs with more natural collagen demonstrated the highest patent rate after 10 weeks. Moreover, the photoreactive peptide remained on the lumen surface of DVs over two months after implantation. Therefore, the photoreactive peptide could be efficiently and sustainably modified onto DVs with more natural collagens, resulting in improved hemocompatibility. Statement of SignificanceWe employed a relatively lower ultrahydrostatic pressure to prepare decellularized vessels (DVs) with less denatured collagens to provide a more favorable environment for cell migration and proliferation. The hemocompatibility of DV luminal surface can be enhanced by peptide modification, but undenatured collagens are difficult to modify. We innovatively introduce a phenylazide group into the hemocompatible peptide HGGVRLY, which we previously identified to possess endothelial affinity and antiplatelet ability, to generate a photoreactive peptide. The photoreactive peptide can be efficiently and stably modified onto DVs with more natural collagens. DV grafts modified with photoreactive peptide exhibit enhanced in vivo patency. Furthermore, the sustainability of photoreactive peptide modification on DV grafts within bloodstream is evident after two months of transplantation.

Human extracellular matrix (ECM)-like collagen and its bioactivity.

Collagen, the most abundant structural protein in the human extracellular matrix (ECM), provides essential support for tissues and guides tissue development. Despite its widespread use in tissue engineering, there remains uncertainty regarding the optimal selection of collagen sources. Animal-derived sources pose challenges such as immunogenicity, while the recombinant system is hindered by diminished bioactivity. In this study, we hypothesized that human ECM-like collagen (hCol) could offer an alternative for tissue engineering. In this study, a facile platform was provided for generating hCol derived from mesenchymal stem cells with a hierarchical structure and biochemical properties resembling native collagen. Our results further demonstrated that hCol could facilitate basal biological behaviors of human adipose-derived stem cells, including viability, proliferation, migration and adipocyte-like phenotype. Additionally, it could promote cutaneous wound closure. Due to its high similarity to native collagen and good bioactivity, hCol holds promise as a prospective candidate for in vitro and in vivo applications in tissue engineering.

A Study on the Efficacy of Autologous Platelet-Rich Plasma Therapy in Erosive Lesions of Oral Cavity

ABSTRACT Autologous platelet-rich plasma (PRP) enhances the recruitment, proliferation, and differentiation of cells involved in tissue regeneration. Platelets contain a number of growth factors (GFs) including platelet-derived GFs and transforming GF which stimulate the proliferation of mesenchymal cells and vascular endothelial GFs and fibroblast GF which stimulate new blood vessel formation. This study evaluates the efficacy of intralesional injection of PRP in erosive lesions of the oral cavity. Five patients who attended the dental outpatient department of a tertiary care hospital were selected irrespective of age and sex diagnosed with erosive lichen planus, pemphigus, and three with desquamative gingivitis. Initial assessment including blood investigations and evaluation of extent, severity, activity, and pain was done. Autologous was prepared from 30 milliliters of whole blood collected into a 350 ml blood collection bag after modifying the anticoagulant to whole blood ratio. A soft spin followed by a hard spin in Thermo Scientific™ Heraeus™ Cryofuge™ was used for PRP preparation. On the same day, 0.5 mL PRP was directly injected onto the base and edge of the erosions using a 31 gauge needle. Patients were followed up and evaluated weekly. In pemphigus and desquamative gingivitis, PRP therapy relieved pain, burning sensation, and bleeding which was proven from Visual Analog Scale score and severity score. No adverse reactions were noted in patients. Autologous PRP poses no risk of allergic reaction and natural collagen is formed in response to the presence of activated platelets. The use of PRP is safe, efficient, and economic. The inability to prevent recurrent lesions and the inability to heal the lesion completely are the major drawbacks.

Comparison of Physiochemical Properties and Biocompatiblity of Two Commercially Available Natural Xenogeneic Collagen Membranes: In-vitro Study

Introduction: Physical factors like stiffness and surface features are among the characteristics that affect the performance of barrier membranes and determine the results of regenerative processes. A perfect equilibrium between the membrane’s rigidity and mechanical stability guarantees effective periodontal regeneration. The study’s novelty lies in comparing the physical characteristics, namely morphology, tensile strength, wettability, and biological characteristics, namely biocompatibility and enzyme resistance properties, of the Fix-GideTM membrane against the gold standard membrane, Bio-Gide®. Aim: To explore the physical and biological properties of two commercially available barrier membranes in oral tissue regeneration. Materials and Methods: The present in-vitro study compared two commercially available membranes, namely Bio-Gide® and Fix-GideTM. Both membranes are bilayered resorbable membranes, with Bio-Gide composed of porcine dermis Type-I and III collagen and Fix-GideTM of bovine origin. The study was conducted at the Central Leather Research Institute, and the membranes were procured from Sri Ramachandra Institute of Higher Education and Research. Morphological characterisation was done using Scanning Electron Microscopy (SEM). Physical properties were evaluated using a tensile strength test, enzyme resistance test, and wettability measurement. Biocompatibility assessment was also performed. The Statistical Package for Social Sciences (SPSS) software was used to run the MannWhitney U test to analyse the statistical data obtained in the enzyme resistance test. Results: Biocompatibility assessment showed no cytotoxic profile of both membranes, portraying their biocompatible nature. Morphological analysis using SEM showed the surface of the Bio-Gide® membrane to be considerably smoother than the Fix-GideTM membrane. Both membranes, however, have fibrous and porous features on their inner surfaces. Tensile strength assessment found that the percentage of elongation was better with Bio-Gide (1.7±0.4 and 4.8±0.4) when compared to Fix-Gide (15.8±0.2 and 2.2±0.2) in both wet and dry states, respectively. The enzyme resistance test evaluated in dry and wet settings showed that the membranes, namely, Bio-Gide® membrane exhibited around 29±2% of degradation, whereas the Fix-GideTM exhibited only 18±2%. These mechanical profiles exhibited that the membranes has appreciable differences, although there wasn’t a statistically significant difference between them (p=0.68). According to wettability studies, BioGide is hydrophilic, but Fix-GideTM is hydrophobic. Conclusion: The observations of the present study showed that Fix-Gide had comparable physio-biological properties to that of the Bio-Gide membrane. This supports the suitability of the use of both membranes for various oral tissue regeneration procedures.