Native Cartilage Research Articles

Cartilage repair using stem cells & biomaterials: advancement from bench to bedside.

Osteoarthritis (OA) involves gradual destruction of articular cartilagemanifested by pain, stiffness of joints, and impaired movement especially in knees and hips. Non-vascularity of this tissue hinders its self-regenerative capacity and thus, the application of reparative or restorative modalities becomes imperative in OA treatment. In recent years, stem cell-based therapies have been explored as potential modalities for addressing OA complications. While mesenchymal stem cells (MSCs) hold immense promise, the recapitulation of native articular cartilage usingMSCs remains elusive. In this review, we have highlighted the chondrogenic potential of MSCs, factors guiding in vitro chondrogenic differentiation, biomaterials available for cartilage repair, their current market status, and the outcomes of major clinical trials. Our search on ClinicalTrials.gov using terms "stem cell" and "osteoarthritis" yielded 83 results. An analysis of the 29 trials that have been completed revealed differences in source of MSCs (bone marrow, adipose tissue, umbilical cord etc.), cell type (autologous or allogenic), and dose administered. Moreover, only 02 out of 29 studies have reported the use of matrix for cartilage repair. From future perspective, aconsensus on choice of cells, differentiation inducers, biomaterials, and clinical settings might pave a way for concocting robust strategies to improve the clinical applicability of biomimetic neocartilage constructs.

Fabrication of chondrocytes/chondrocyte-microtissues laden fibrin gel auricular scaffold for microtia reconstruction.

Fibrin gel-based scaffolds have promising potential for microtia reconstruction. Autologous chondrocytes and chondrocyte cell sheets are frequently used seed cell sources for cartilage tissue engineering. However, the aesthetic outcome of chondrocyte-based microtia reconstruction is still not satisfactory. In this study, we aimed to fabricate the chondrocytes/chondrocyte-microtissues laden fibrin gel auricular scaffold for microtia reconstruction. We designed a unique auricular mold that could fabricate a fibrin gel scaffold resembling human auricle anatomy. Primary chondrocytes were harvested from rabbit auricular cartilage, and chondrocyte cell sheets were developed. Chondrocyte-microtissues were prepared from the cell sheets. The mixture of chondrocytes/chondrocyte-microtissues was laden in fibrin gel during the auricular scaffold fabrication. The protrusions and recessed structure in the auricular scaffold surface were still clearly distinguishable. After a one-week in vitro culture, the 3 D structure and auricular anatomy of the scaffold were retained. And followed by eight-week subcutaneous implantation, cartilaginous tissue was regenerated in the artificial auricular structure as indicated by the results of H&E, Toluidine blue, Safranin O, and type II collagen (immunohistochemistry) staining. Protrusions and depressions of the auricular scaffold were slightly deformed, but the overall auricular anatomy was maintained after 8-week in vivo implantation. Extracellular matrix components content were similar in artificial auricular cartilage and rabbit native auricular cartilage. In conclusion, the mixture of chondrocytes/chondrocyte-microtissues laden fibrin gel auricular scaffold showed a promising potential for cartilaginous tissue regeneration, suggesting this as an effective approach for autologous chondrocyte-based microtia reconstruction.

Regeneration of hyaline cartilage in osteochondral lesion model using L-lysine magnetic nanoparticles labeled mesenchymal stem cells and their in vivo imaging.

Treatment of osteochondral defects continues to pose a major challenge for patients and orthopedic surgeons due to the limited healing potential of articular cartilage. Mesenchymal stem cells (MSCs) possess therapeutic potential for the treatment of osteochondral pain and pathology. However, it is necessary to use proper labeling and imaging agent of stem cells that can decipher its role posttransplantation. A major limitation of routinely used contrast agents is signal dilution over a period of time which limits its use for further studies. At the same time, regeneration of fibrocartilage over native hyaline cartilage also limits the use of conventional therapies. The present study evaluates the efficacy of bone marrow-derived mesenchymal stem cells (BMSCs) for the treatment of osteochondral defect in rats with the regeneration of hyaline cartilage in situ and in vivo monitoring of the stem cells using L-lysine functionalized magnetic iron oxide nanoparticles (lys-IONPs). L-lysine stabilizes the iron oxide nanoparticles, enhances the biocompatibility, and provides functionalities for efficient stem cell labeling. in vitro toxic effects of lys-IONPs on mitochondrial impairment, morphological alterations, and actin cytoskeleton reveal minimum damage to BM-MSCs. Histological data (H and E, Masson's trichrome and immunohistochemistry) describe the early initiation of healing and regeneration of hyaline-like cartilage over fibrocartilage in stem cell treated groups. MR scans demonstrate generation of hypointense signals in lys-IONPs-BMSCs with improved signal intensity and minimum loss over 28 days revealing its use as a long-term stem cell labeling and imaging agent.

The use of antifreeze proteins to modify pore structure in directionally frozen alginate sponges for cartilage tissue engineering

It is thought that osteoarthritis is one of the world’s leading causes of disability, with over 8.75 million people in the UK alone seeking medical treatment in 2013. Although a number of treatments are currently in use, a new wave of tissue engineered structures are being investigated as potential solutions for early intervention. One of the key challenges seen in cartilage tissue engineering is producing constructs that can support the formation of articular cartilage, rather than mechanically inferior fibrocartilage. Some research has suggested that mimicking structural properties of the natural cartilage can be used to enhance this response. Herein directional freezing was used to fabricate scaffolds with directionally aligned pores mimicking the mid-region of cartilage, anti-freeze proteins were used to modify the porous structure, which in turn effected the mechanical properties. Pore areas at the tops of the scaffolds were 180.46 ± 44.17 μm2 and 65.66 ± 36.20 μm2 for the AFP free and the AFP scaffolds respectively, and for the bases of the scaffolds were 91.22 ± 19.05 μm2 and 69.41 ± 21.94 μm2 respectively. Scaffolds were seeded with primary bovine chondrocytes, with viability maintained over the course of the study, and regulation of key genes was observed.

Designer Hydrogel with Intelligently Switchable Stem-Cell Contact for Incubating Cartilaginous Microtissues.

Stem-cell-derived organoid can resemble in vivo tissue counterpart and mimic at least one function of tissue or organ, possessing great potential for biomedical application. The present study develops a hydrogel with cell-responsive switch to guide spontaneous and sequential proliferation and aggregation of adipose-derived stem cells (ASCs) without inputting artificial stimulus for in vitro constructing cartilaginous microtissues with enhanced retention of cell-matrix and cell-cell interactions. Polylactic acid (PLA) rods are surface-aminolyzed by cystamine, followed by being involved in the amidation of poly(( l-glutamic acid) and adipic acid dihydrazide (ADH) to form a hydrogel. Along with tubular pore formation in hydrogel after dissolution of PLA rods, aminolyzed PLA molecules with disulfide bonds on rod surfaces are covalently transferred to the tubular pore surfaces of poly(l-glutamic acid)/ADH hydrogel. Because PLA attaches cells, while poly(l-glutamic acid)/ADH hydrogel repels cells, ASCs are found to adhere and proliferate on the tubular pore surfaces of hydrogel first and then cleave disulfide bonds by secreting molecules containing thiol, thus inducing desorption of PLA molecules and leading to their spontaneous detachment and aggregation. Associated with chondrogenic induction by TGF-β1 and IGF-1 in vitro for 28 days, the hydrogel as an all-in-one incubator produces well-engineered columnar cartilage microtissues from ASCs, with the glycosaminoglycans (GAGs) and collagen type II (COL II) deposition achieving 64 and 69% of those in chondrocytes pellet, respectively. The cartilage microtissues further matured in vivo for 8 weeks to exhibit extremely similar histological features and biomechanical performance to native hyaline cartilage. The GAGs and COL II content, as well as compressive modulus of the matured tissue show no significant difference with native cartilage. The designer hydrogel may hold a promise for long-term culture of other types of stem cells and organoids.

A Biomimetic Nano‐Engineered Platform for Functional Tissue Engineering of Cartilage Superficial Zone

Articular cartilage has limited regeneration capacity because of its acellular and avascular nature. Although tissue engineering has been shown to be life-saving, reforming cartilage zones required by the appropriate tissue functions are challenging. Herein, the need is addressed by designing and producing a nano-engineered structure mimicking the superficial zone (SZ) of articular cartilage. The substrate is based on silk with good mechanical properties in conjunction with nano-topographical and biochemical cues. Nanopillar arrays are produced on the silk surface to regulate the stem cell morphology rendering them with a flattened ellipsoidal shape that is similar to that of chondrocytes in the SZ of natural cartilage. The cell interactions are enhanced by nitrogen ion implantation and the biomolecule, kartogenin (KGN), is loaded to promote chondrogenesis of the stem cells and furthermore, a thermosensitive chitosan hydrogel is formed on the nanopatterned silk to produce rheological properties similar to those of a synovial fluid. Based on the in vitro results and mechanical properties, it is a desirable implantable smart structure mimicking the cartilage SZ with the ability of continuous drug release for cartilage regeneration.

Different types of cartilage neotissue fabricated from collagen hydrogels and mesenchymal stromal cells via SOX9, TGFB1 or BMP2 gene transfer

ObjectiveAs native cartilage consists of different phenotypical zones, this study aims to fabricate different types of neocartilage constructs from collagen hydrogels and human mesenchymal stromal cells (MSCs) genetically modified to express different chondrogenic factors.DesignHuman MSCs derived from bone-marrow of osteoarthritis (OA) hips were genetically modified using adenoviral vectors encoding sex-determining region Y-type high-mobility-group-box (SOX) 9, transforming growth factor beta (TGFB) 1 or bone morphogenetic protein (BMP) 2 cDNA, placed in type I collagen hydrogels and maintained in serum-free chondrogenic media for three weeks. Control constructs contained unmodified MSCs or MSCs expressing GFP. The respective constructs were analyzed histologically, immunohistochemically, biochemically, and by qRT-PCR for chondrogenesis and hypertrophy.ResultsChondrogenesis in MSCs was consistently and strongly induced in collagen I hydrogels by the transgenes SOX9, TGFB1 and BMP2 as evidenced by positive staining for proteoglycans, chondroitin-4-sulfate (CS4) and collagen (COL) type II, increased levels of glycosaminoglycan (GAG) synthesis, and expression of mRNAs associated with chondrogenesis. The control groups were entirely non-chondrogenic. The levels of hypertrophy, as judged by expression of alkaline phosphatase (ALP) and COL X on both the protein and mRNA levels revealed different stages of hypertrophy within the chondrogenic groups (BMP2>TGFB1>SOX9).ConclusionsDifferent types of neocartilage with varying levels of hypertrophy could be generated from human MSCs in collagen hydrogels by transfer of genes encoding the chondrogenic factors SOX9, TGFB1 and BMP2. This technology may be harnessed for regeneration of specific zones of native cartilage upon damage.

ADAMTS7 degrades Comp to fuel BMP2-dependent osteogenic differentiation and ameliorate oncogenic potential in osteosarcomas.

Osteosarcoma (OS) is the most common primary malignant bone tumor in children and adolescents, with a high metastatic potential. Despite dramatic changes in OS treatments over the past decades, their efficiency still remains limited, with severe complications and adverse side effects. Key mechanisms underlining tumorigenesis, metastasis and chemotherapy resistance are currently lacking, in turn hindering any progress with respect to developing effective and safe therapeutic strategies against OS. Recently, ADAMTS7, a member of the disintegrin and metalloproteinase with thrombospondin motifs (ADAMTS) family, was shown to be involved in osteogenic differentiation-related pathological processes. ADAMTS7 promotes vascular calcification via disturbing the balance between osteogenic bone morphogenetic protein (BMP)2 (regulating osteogenic differentiation and bone formation during development) and its natural inhibitor cartilage oligomeric matrix protein (Comp). Hence, in the present study, we aimed to investigate the role of ADAMTS7 in the pathological process of OS. We first revealed that ADAMTS7 was decreased in OS tissues. Lower expression of ADAMTS7 was correlated with poor histological differentiation and an advanced clinical stage of OS. Through loss- and gain-function analysis, we further revealed that ADAMTS7 attenuated cell proliferation, migration and invasion, at the same time as promoting the expression of osteogenic differentiation markers in two OS cell lines: MG63 and SAOS2. Moreover, Comp was responsible for the effects of ADAMTS7 on OS pathogenesis by reinforcing cell osteogenic differentiation mediated by BMP2 invitro. In conclusion, ADAMTS7-mediated degradation of Comp may provide a potential therapeutic target for the treatment of OS.

Cartilage Injury in the Knee: Assessment and Treatment Options.

Cartilage injuries in the knee are common and can occur in isolation or in combination with limb malalignment, meniscus, ligament, and bone deficiencies. Each of these problems must be addressed to achieve a successful outcome for any cartilage restoration procedure. If nonsurgical management fails, surgical treatment is largely based on the size and location of the cartilage defect. Preservation of the patient's native cartilage is preferred if an osteochondral fragment can be salvaged. Chondroplasty and osteochondral autograft transfer are typically used to treat small (<2 cm) cartilage defects. Microfracture has not been shown to be superior to chondroplasty alone and has potential adverse effects, including cyst and intralesional osteophyte formation. Osteochondral allograft transfer and matrix-induced autologous chondrocyte implantation are often used for larger cartilage defects. Particulated juvenile allograft cartilage is another treatment option for cartilage lesions that has good to excellent short-term results but long-term outcomes are lacking.

High Lubricity Meets Load Capacity: Cartilage Mimicking Bilayer Structure by Brushing Up Stiff Hydrogels from Subsurface

AbstractNatural articular cartilage has ultralow friction even at high squeezing pressure. Biomimicking cartilage with soft materials has been and remains a grand challenge in the fields of materials science and engineering. Inspired by the unique structural features of the articular cartilage, as well as by its remarkable lubrication mechanisms dictated by the properties of the superficial layers, a novel archetype of cartilage‐mimicking bilayer material by robustly entangling thick hydrophilic polyelectrolyte brushes into the subsurface of a stiff hydrogel substrate is developed. The topmost soft polymer layer provides effective aqueous lubrication, whereas the stiffer hydrogel layer used as a substrate delivers the load‐bearing capacity. Their synergy is capable of attaining low friction coefficients (order 0.010) under heavily loaded conditions (order 10 MPa contact pressure) in water environment, a performance incredibly close to that of natural articular cartilage. The bioinspired material can maintain low friction even when subjected to 50k reciprocating cycles under high contact pressure, with almost no wear observed on the sliding track. These findings are theoretically explained and compounded by multiscale simulations used to shed light on the mechanisms responsible for this remarkable performance. This work opens innovative technology routes for developing cartilage‐mimicking ultralow friction soft materials.

Microfracture Versus Drilling of Articular Cartilage Defects: A Systematic Review of the Basic Science Evidence.

Background:Microfracture (MFx) is one of the most common techniques used for the treatment of articular cartilage defects, although recently there has been a trend toward the use of drilling rather than MFx for the treatment of these defects.Purpose:To perform a systematic review of basic science studies to determine the effect of microfracture versus drilling for articular cartilage repair.Study Design:Systematic review.Methods:A systematic review was performed by searching PubMed, the Cochrane Library, and EMBASE to identify basic science studies comparing outcomes of MFx versus drilling. The search phrase used was microfracture AND (drilling OR microdrilling). Inclusion criteria were basic science studies that directly compared the effect of MFx versus drilling on subchondral bone, bone marrow stimulation, and cartilage regeneration.Results:A total of 7 studies met the inclusion criteria and were included in this systematic review. Of these, 4 studies were performed in rabbits, 1 study in sheep, and 2 studies in humans. All of the included studies investigated cartilage repair in the knee. In the animal studies, microfracture produced fractured and compacted bone and led to increased osteocyte necrosis compared with drilling. Deep drilling (6 mm) was superior to both shallow drilling (2 mm) and MFx in terms of increased subchondral hematoma with greater access to marrow stroma, improved cartilage repair, and increased mineralized bone. However, the overall quality of cartilage repair tissue was poor regardless of marrow stimulation technique. In 2 studies that investigated repair tissue after MFx and/or drilling in human patients with osteoarthritis and cartilage defects, the investigators found that cartilage repair tissue did not achieve the quality of normal hyaline articular cartilage.Conclusion:In the limited basic science studies that are available, deep drilling of cartilage defects in the knee resulted in improved biological features compared with MFx, including less damage to the subchondral bone and greater access to marrow stroma. Regardless of marrow stimulation technique, the overall quality of cartilage regeneration was poor and did not achieve the characteristics of native hyaline cartilage. Overall, there is a general lack of basic science literature comparing microfracture versus drilling for focal chondral defects.

An in vivo evaluation of induced chondrogenesis by decellularized extracellular matrix particles.

Bioengineered scaffolds composed of synthetic materials and extracellular matrix (ECM) components can offer a tissue-specific microenvironment capable of regulating cells to regenerate the structure and function of the native cartilage. Here, given the potential preservation of biomechanical and biochemical cues found in the native cartilage, particulate decellularized ECM (DC-ECM) was utilized for immobilization on the surface of nanofibrous scaffolds. Afterward, the chondro-inductive potential and ectopic cartilage formation after subcutaneous implantation of bioengineered DC-ECM scaffolds were investigated in mice model. Eight weeks post-implantation, no growth of considerable inflammatory response and neovascularization was observed in histological images of bioengineered DC-ECM scaffolds. Pre-seeded bioengineered scaffolds with human adipose-derived stem cells exhibited high levels of chondro-induction capability, indicated with immunohistochemical and gene expression results. In both interval times, we also observed chondrogenesis and tissue formation after implanting unseeded bioengineered scaffolds, which denote that the presence of DC-ECM particles can even enhance attachment and migration of the host cells and induce chondrogenesis to them. To sum up, the incorporation of DC-ECM materials to tissue engineered constructs is a promising avenue to mimic the native tissue environment for regulation of cartilage regeneration in both in vivo and in vitro settings.

Modeling Normal and Pathological Ear Cartilage in vitro Using Somatic Stem Cells in Three-Dimensional Culture.

Microtia (underdeveloped ear) is a rare congenital dysmorphology affecting the development of the outer ear. Although human microtic cartilage has not been fully characterized, chondrogenic cells derived from this tissue have been proposed as a suitable source for autologous auricular reconstruction. The aim of this study was to further characterize native microtic cartilage and investigate the properties of cartilage stem/progenitor cells (CSPCs) derived from it. Two-dimensional (2D) systems are most commonly used to assess the chondrogenic potential of somatic stem cells in vitro, but limit cell interactions and differentiation. Hence here we investigated the behavior of microtic CSPCs in three-dimensional spheroid cultures. Remarkable similarities between human microtic cartilages from five patients, as compared to normal cartilage, were observed notwithstanding possibly different etiologies of the disease. Native microtic cartilage displayed poorly defined perichondrium and hyper-cellularity, an immature phenotype that resembled that of the normal developing human auricular cartilage we studied in parallel. Crucially, our analysis of microtic ears revealed for the first time that, unlike normal cartilage, microtic cartilages are vascularized. Importantly, CSPCs isolated from human microtic and normal ear cartilages were found to recapitulate many characteristics of pathological and healthy tissues, respectively, when allowed to differentiate as spheroids, but not in monolayer cultures. Noteworthily, starting from initially homogeneous cell pellets, CSPC spheroids spontaneously underwent a maturation process in culture, and formed two regions (inner and outer region) separated by a boundary, with distinct cell types that differed in chondrogenic commitment as indicated by expression of chondrogenic markers. Compared to normal ear-derived spheroids, microtic spheroids were asymmetric, hyper-cellularized and the inner and outer regions did not develop properly. Hence, their organization resembled that of native microtic cartilage. Together, our results identify novel features of microtic ears and highlight the importance of 3D self-organizing in vitro systems for better understanding somatic stem cell behavior and disease modeling. Our observations of ear-derived chondrogenic stem cell behavior have implications for choice of cells for tissue engineered reconstructive purposes and for modeling the etiopathogenesis of microtia.

Microfabrication of a biomimetic arcade-like electrospun scaffold for cartilage tissue engineering applications.

In recent years, the engineering of biomimetic cellular microenvironments has emerged as a top priority for regenerative medicine, being the in vitro recreation of the arcade-like cartilaginous tissue one of the most critical challenges due to the notorious absence of cost- and time-efficient microfabrication techniques capable of building 3D fibrous scaffolds with precise anisotropic properties. Taking this into account, we suggest a feasible and accurate methodology that uses a sequential adaptation of an electrospinning-electrospraying set up to construct a hierarchical system comprising both polycaprolactone (PCL) fibres and polyethylene glycol sacrificial microparticles. After porogen leaching, the bi-layered PCL scaffold was capable of presenting not only a depth-dependent fibre orientation similar to natural cartilage, but also mechanical features and porosity proficient to encourage an enhanced cell response. In fact, cell viability studies confirmed the biocompatibility of the scaffold and its ability to guarantee suitable cell adhesion, proliferation and migration throughout the 3D anisotropic fibrous network during 21 days of culture. Additionally, likewise the hierarchical relationship between chondrocytes and their extracellular matrix, the reported PCL scaffold was able to induce depth-dependent cell-material interactions responsible for promoting a spatial modulation of the morphology, alignment and density of the cells in vitro.

Extremely Tough Hydrogels with Cotton Fibers Reinforced

Creating both strong and tough hydrogel materials have been a challenging task, due to their nature of generally mutual exclusion. Interestingly, natural materials such as bone and shells usually offer an unprecedented combination of strength and toughness, which would provide inspiration for novel materials. Herein, the design of natural cartilage is mimicked with collagen fibers incorporated into extracellular matrix, and fabric‐reinforced composite hydrogels are prepared. The poly (vinyl alcohol) (PVA) hydrogel composite exhibits significant improvement in the mechanical properties, compared with cotton scaffold or neat PVA gel. Under deformation, the fibers in the hydrogel network are pulled out and break up gradually to dissipate energy, providing significant stiffness and toughness for the gel composite. This work opens up a novel and simple method to construct tough materials and displays potential application in joint‐replacement.

Dual functional construct containing kartogenin releasing microtissues and curcumin for cartilage regeneration

BackgroundRegeneration of articular cartilage poses a tremendous challenge due to its limited self-repair capability and inflammation at the damaged site. To generate the desired structures that mimic the structure of native tissue, microtissues with repeated functional units such as cell aggregates have been developed. Multicellular aggregates of mesenchymal stem cells (MSCs) can be used as microscale building blocks of cartilage due to their potential for cell-cell contact, cell proliferation, and differentiation.MethodsChondrogenic microtissues were developed through incorporation of kartogenin-releasing poly (lactic-co-glycolic acid) (PLGA) microparticles (KGN-MP) within the MSC aggregates. The chondrogenic potential of KGN-MP treated MSC aggregates was proven in vitro by studying the chondrogenic markers at the RNA level and histological analysis. In order to address the inflammatory responses at the defect site, the microtissues were delivered in vivo via an injectable, anti-inflammatory hydrogel that contained gelatin methacryloyl (GelMA) loaded with curcumin (Cur).ResultsThe KGN-MPs were fabricated to support MSCs during cartilage differentiation. According to real-time RT-PCR analysis, the presence of KGN in the aggregates led to the expression of cartilage markers by the MSCs. Both toluidine blue (TB) and safranin O (SO) staining demonstrated homogeneous glycosaminoglycan production throughout the KGN-MP incorporated MSC aggregates. The curcumin treatment efficiently reduced the expressions of hypertrophy markers by MSCs in vitro. The in vivo results showed that implantation of chondrogenic microtissues (KGN-MP incorporated MSC aggregates) using the curcumin loaded GelMA hydrogel resulted in cartilage tissue regeneration that had characteristic features close to the natural hyaline cartilage according to observational and histological results.ConclusionsThe use of this novel construct that contained chondrogenic cell blocks and curcumin is highly desired for cartilage regeneration.Graphical abstract

Influence of Cellular Microenvironment on Human Articular Chondrocyte Cell Signaling.

Alteration of the cellular microenvironment may influence the intra- and intercellular communication and contribute to cartilage injury and repair. The purpose of this study was to investigate how matrix elasticity/stiffness affects chondrogenic activities, including cell survival, phenotypic expression, and the release of both pro- and anti-inflammatory cytokines. Human articular chondrocytes (HACs) cultured on traditional 2-dimensional (2D) plastic surfaces were compared with those cultured within 3D hydrogel matrices of varying stiffness. Chondrogenic proliferation, differentiation, and the expression of pro- and anti-inflammatory cytokines were evaluated. Both interleukin-1-beta (IL-1β) and human synovial fluid-derived cells (hSFCs) were introduced to study the effects of matrix stiffness on chondrocyte response. Cells demonstrated the most robust chondrogenic differentiation and secreted the least pro-inflammatory cytokines when the matrix stiffness was close to their native microenvironment. The IL-1β effects were attenuated when HACs were co-cultured with hSFCs. Modifying the matrix stiffness to mimic the native cartilage microenvironment not only optimized chondrogenic expression but also was essential for the regulation of physiological homeostasis. This study proposed a new toolkit to study cell-molecule, cell-cell, and cell-matrix influence on cartilage physiology.

Long-term in vivo integrity and safety of 3D-bioprinted cartilaginous constructs.

Long-term stability and biological safety are crucial for translation of 3D-bioprinting technology into clinical applications. Here, we addressed the long-term safety and stability issues associated with 3D-bioprinted constructs comprising a cellulose scaffold and human cells (chondrocytes and stem cells) over a period of 10 months in nude mice. Our findings showed that increasing unconfined compression strength over time significantly improved the mechanical stability of the cell-containing constructs relative to cell-free scaffolds. Additionally, the cell-free constructs exhibited a mean compressive stress and stiffness (compressive modulus) of 0.04 ± 0.05 MPa and 0.14 ± 0.18 MPa, respectively, whereas these values for the cell-containing constructs were 0.11 ± 0.08 MPa (p = .019) and 0.53 ± 0.59 MPa (p = .012), respectively. Moreover, histomorphologic analysis revealed that cartilage formed from the cell-containing constructs harbored an abundance of proliferating chondrocytes in clusters, and after 10 months, resembled native cartilage. Furthermore, extension of the experiment over the complete lifecycle of the animal model revealed no signs of ossification, fibrosis, necrosis, or implant-related tumor development in the 3D-bioprinted constructs. These findings confirm the in vivo biological safety and mechanical stability of 3D-bioprinted cartilaginous tissues and support their potential translation into clinical applications.

Use of in vitro assays to identify antibiotics that are cytotoxic to normal equine chondrocytes and synovial cells.

Intra-articular (IA) antibiotic usage is prevalent in equine practice. However, recent emergence of antimicrobial resistance prompts re-evaluation of antibiotic selection, particularly when used prophylactically. Furthermore, many commonly used antibiotics exert direct cytotoxicity to equine cells, and appropriate IA doses have not been defined. To screen antibiotics in vitro as an initial assessment of cytotoxicity against normal equine joint cells in monolayer culture and explant tissues. In vitro experimental study. Chondrocytes and synovial cells were harvested from three horses and plated on 24-well plates (100000 cells/wells in triplicate) for 48hours prior to addition of antibiotics. Joint cells were exposed to antibiotics (n=15) at various doses (25-0.39mg/mL in complete DMEM media) for 24hours and viability was assessed by trypan blue dye exclusion. The half maximal inhibitory concentration (IC50) was determined for each antibiotic. Cartilage explants were obtained from 3 horses, minced and exposed to antibiotics (n=5) for 72hours. Live/dead staining was performed, and fluorescence was visualised using Olympus IX83 spinning disk confocal microscope. Percentage of live vs dead cells was quantified. Antibiotics from different antimicrobial classes expressed dose-dependent but variable cytotoxicity to equine joint cells in vitro. Aminoglycosides and doxycycline had the lowest IC50 (most toxic). Ampicillin sulbactam, imipenem, tobramycin, ceftiofur sodium and amoxicillin had IC50>25mg/mL for at least one cell line, representing potentially less cytotoxic alternatives. Further studies are necessary to extrapolate these in vitro data results to the in vivo joint environment. Targeted IA antibiotic therapy would involve selection of the safest antibiotics (highest IC50) with efficacy based on bacterial culture/sensitivity. Antimicrobial selection and evidence-based dosing may minimise damage to native articular cartilage and synovial cells and development of antimicrobial resistance when IA antibiotics are used in equine practice.

Inhibitory Effect of Topical Cartilage Acellular Matrix Suspension Treatment on Neovascularization in a Rabbit Corneal Model.

The extracellular matrix (ECM) of articular cartilage has an inhibitory effect on vascularization, yet clinical utilization has been technically challenging. In this study, we aimed to fabricate a biologically functional ECM powder suspension from porcine articular cartilage that inhibits neovascularization (NV). The digested-cartilage acellular matrix (dg-CAM) was prepared by sequential processes of decellularization, enzymatic digestion and pulverization. Physicochemical properties of dg-CAM were compared with that of native cartilage tissue (NCT). Cellular interactions between human umbilical vein endothelial cells (HUVECs) and dg-CAM was evaluated with proliferation, migration and tube formation assays compared with that of type I collagen (COL) and bevacizumab, an anti-angiogenic drug. We then investigated the therapeutic potential of topical administration of dg-CAM suspension on the experimentally induced rabbit corneal NV model. The dg-CAM released a significantly larger amount of soluble proteins than that of the NCT and showed an improved hydrophilic and dispersion properties. In contrast, the dg-CAM contained a large amount of collagen, glycosaminoglycans and anti-angiogenic molecules as much as the NCT. The inhibitory effect on NV of the dg-CAM was more prominent than that of COL and even comparable to that of bevacizumab in inhibiting the HUVECs. The therapeutic potential of the dg-CAM was comparable to that of bevacizumab in the rabbit corneal NV model by efficiently inhibiting neovessel formation of the injured cornea. The current study developed a dg-CAM having anti-angiogenic properties, together with water-dispersible properties suitable for topical or minimally invasive application for prevention of vessel invasion.