National Industrial Complex Research Articles

Economic evaluation of environmental epidemiological projects in national industrial complexes.

In this economic evaluation of environmental epidemiological monitoring projects, we analyzed the economic feasibility of these projects by determining the social cost and benefit of these projects and conducting a cost/benefit analysis. Here, the social cost was evaluated by converting annual budgets for these research and survey projects into present values. Meanwhile, the societal benefit of these projects was evaluated by using the contingent valuation method to estimate the willingness-to-pay of residents living in or near industrial complexes. In addition, the extent to which these projects reduced negative health effects (i.e., excess disease and premature death) was evaluated through expert surveys, and the analysis was conducted to reflect the unit of economic value, based on the cost of illness and benefit transfer method. The results were then used to calculate the benefit of these projects in terms of the decrease in negative health effects. For residents living near industrial complexes, the benefit/cost ratio was 1.44 in the analysis based on resident surveys and 5.17 in the analysis based on expert surveys. Thus, whichever method was used for the economic analysis, the economic feasibility of these projects was confirmed.

Psychological effects of a disastrous hydrogen fluoride spillage on the local community

BackgroundOn September 27, 2012, at 3:43 pm, a hydrogen fluoride spill occurred in a manufacturing plant located at the 4th complex of the Gumi National Industrial Complex in Gumi City, South Korea. The present study aimed to evaluate the psychological effects of the hydrogen fluoride spill on the members of the community and to investigate their relationships with physical symptoms and changes in psychological effects occurring as time passed after the accident.MethodsThe 1st phase involved a survey of 1359 individuals that was conducted 1 month after the spill, and the 2nd phase involved a survey of 711 individuals that was conducted 7 months after the accident. The questionnaires included items for assessing demographic characteristics, hydrogen fluoride exposure level, physical symptoms, and psychological status. Physical symptoms were assessed to determine the persistence of irritations. Psychological status was assessed to investigate the impact of event level using the Impact of Event Scale – Revised Korean version (IES-R-K), and the anxiety level was assessed using the Beck Anxiety Inventory (BAI).ResultsAs the hydrogen fluoride exposure level increased, the impact of event and anxiety levels increased significantly both 1 and 7 months after the accident (p < 0.05). The mean score of the impact of event levels decreased significantly from 33.33 ± 14.64 at 1 month after the accident to 28.68 ± 11.80 at 7 months after the accident (p < 0.05). The mean score of the anxiety levels increased significantly from 5.16 ± 6.59 at 1 month after the accident to 6.79 ± 8.41 at 7 months after the accident (p < 0.05). The risk of persistent physical symptoms at 7 months after the accident was significantly higher in females. The risk of persistent physical symptoms also increased significantly, with increasing age, hydrogen fluoride exposure, and impact of event levels (p < 0.05).ConclusionsThe present study found that the impact of event level and anxiety level increased with increasing hydrogen fluoride exposure. Anxiety levels persisted even after time passed. The risk of persistent physical symptoms at 7 months after the accident was higher in females, and it increased with increasing age, hydrogen fluoride exposure level, and impact of event levels.

Levels of blood lead and urinary cadmium in industrial complex residents in Ulsan

BackgroundPopulations neighboring industrial complexes are at an increased health risk, due to constant exposure to various potentially hazardous compounds released during industrial production activity. Although there are many previous studies that focus on occupational exposure to heavy metals, studies that focused on environmental exposure to lead and cadmium are relatively rare. The purpose of this study is to evaluate the extent of the environmental exposure of heavy metals in residents of industrial area.MethodsFour areas in close proximity to the Ulsan petrochemical industrial complex and the Onsan national industrial complex were selected to be included in the exposure group, and an area remotely located from these industrial complexes was selected as the non-exposure group. Among the residents of our study areas, a total of 1573 subjects aged 20 years and older were selected and all study subjects completed a written questionnaire. Blood and urine samples were obtained from about one third of the subjects (465 subjects) who provided informed consent for biological sample collection. Total 429 subjects (320 subjects from exposure area, 109 subjects from non-exposure area) were included in final analysis.ResultsThe geometric mean blood lead level among the subjects in the exposed group was 2.449 μg/dL, which was significantly higher than the non-exposure group’s level of 2.172 μg/dL. Similarly, the geometric mean urine cadmium levels between the two groups differed significantly, at 1.077 μg/g Cr. for the exposed group, and 0.709 μg/g Cr. for the non-exposure group.In a multiple linear regression analysis to determine the relationship between blood lead level and related factors, the results showed that blood lead level had a significant positive correlation with age, the male, exposure area, and non-drinkers. In the same way, urine cadmium level was positively correlated with age, the female, exposure area, and smokers.ConclusionsThis study found that blood lead levels and urine cadmium levels were significantly higher among the residents of industrial areas than among the non-exposure area residents, which is thought to be due to the difference in environmental exposure of lead and cadmium. Furthermore, it was clear that at a low level of exposure, differences in blood lead or urine cadmium levels based on age, gender, and smoking status were greater than the differences based on area of residence. Therefore, when evaluating heavy metal levels in the body at a low level of exposure, age, gender, and smoking status must be adjusted, as they are significant confounding factors.

Structural transformation of national industrial complex in context of post-industrial development

Structural transformation of national industrial complex in context of post-industrial development

Methodical assessment and analysis tools of national industrial complex capacity in the regional aspect

Current process of financial instability led to the complex of problems, which solution determines the need to develop the effective management mechanism of regional industrial estates stabilizing their development. The following article is an attempt to develop specific methodical tools to evaluate the environment and the functional results of the national industrial sector with consideration for heterogeneity and uneven territorial development of Russian. Suggested by the authors the implementation of assessment and analysis algorithm of national industrial complexes capacity contributes to a clear objectives statement of industrial policy of territorial authorities and the development on this basis the strategies socio-economic development for a long-term perspective in an unstable market environment.

Search of SECURITY Level of National Industrial Complex in Republic of KOREA: Focusing on Gumi Area

The Republic of Korea is now a global economic power and reached worldwide level in IT, shipbuilding, steel and automobile industries and is investing...

Search of SECURITY Level of National Industrial Complex in Republic of KOREA: Focusing on Gumi Area

Search of SECURITY Level of National Industrial Complex in Republic of KOREA: Focusing on Gumi Area

Accidental benzene release risk assessment in an urban area using an atmospheric dispersion model

This study applied the American Meteorological Society and Environmental Protection Agency Regulatory Model (AERMOD) to assess the risk caused by an accidental release and dispersion of the toxic chemical benzene in the vicinity of a highly populated urban area. The modeling domain encompasses the Korean megacity of Ulsan, which includes two national industrial complexes and is characterized by a complex coastal terrain. Multiple AERMOD simulations were conducted for an assumed emission scenario using background wind data from August between 2009 and 2013. The series of experiments produced the spatial accident probability patterns for different concentration levels during daytime and nighttime scenarios based on the corresponding dominant wind patterns. This study further quantifies the potential accident risk based on the number of affected individuals by combining the accident probability with the indoor and outdoor population estimates. The chemical gas dispersion characteristics depend on various local meteorological conditions, such as the land-sea breeze direction, which alternates between daytime and nighttime, and the atmospheric stability. The results reveal that benzene dispersion affects a much larger area during the nighttime owing to the presence of a nocturnal stable boundary layer with significant temperature stratification. The affected area is smaller during the daytime owing to decreased stability and enhanced vertical mixing in the boundary layer. The results include a high degree of uncertainty during the nighttime owing to weak wind speeds and the lack of a prevailing wind direction, which impact the vulnerable area. However, vulnerable areas are more effectively identified during the daytime, when more consistent meteorological conditions exist. However, the potential risk becomes much lower during the nighttime owing to a substantial reduction of the outdoor population.

국내 주요 국가산업단지에서 중금속에 의한 토양오염

BACKGROUND: Contamination of soils by heavy metals is the serious environmental problem. In particular, industrial processing is one of the main sources of heavy metal contamination. The objective of this study was to investigate the distribution characteristics of heavy metals in soils collected from industrial complex. METHODS AND RESULTS: In this study, the soil contamination and enrichment factor (EF) of heavy metals were investigated in three national industrial complexes such as Yeosu, Ulsan and Sihwa Banwal industrial complexes. The target heavy metals includes Cd, Cu, As, Hg, Pb, Cr, Zn, and Ni. The results showed that the contents of Cd, Hg, Pb, Zn and Ni in Yeosu and the contents of Cu, As and Cr in Sihwa Banwal were higher than in any other industrial complex. The results of principal component analysis(PCA) in Yeosu, Ulsan and Sihwa Banwal complex could be explained up to approximately 81.4, 69.1 and 70.9% by two factor, respectively. Enrichment factors of Cd, Pb and Zn in all the investigated industrial complexes were above 1.0 that was the value judged to be a high contamination. And EF of Cr was above 1.0 in Sihwa Banwal complex. EF of Zn in all sites was generally high from the other heavy metals. CONCLUSION: Therefore, soils maybe significantly affected by heavy metals (especially, Cd, Pb and Zn) present in the emissions from industrial complexes.

Security and Technology

The expansive scope of national security makes it a topic of utmost importance to all Americans. National security law and policy affect nearly every aspect of our lives, our health, our safety, and our dignity. In fact, the topic is so far-reaching that the term “national security” is often exploited for ulterior commercial or political purposes to increase profits, obtain more government funding, and expand government authorities in areas that historically were not related to national security. Indeed, one could reasonably make the claim that we are now in the midst of a national security industrial complex that is self-perpetuating.

The Optimization on Safety Color of Work Clothing Based on Functional Color-arrangement Planning and Field Test

This study intended to propose a guideline designed to secure safety by developing a functional color design for the color of the ordinary working clothes worn in the actual industrial settings of the machine industry in national industrial complexes in Korea. For this, a total of 6 sets of actual working clothes were produced for test, using 2-color arrangements with blue, of varying brightness and chroma for top and bottom, in relation to the visibility proven in preceding studies and evaluated in the machine industry. Blue was suggested the best proper color for machine industry by previous studies. For the material of working clothes, a total of 111 swatches were collected from the Dongdaemoon Fabric Market, and they were analyzed for color values. A total of 6 materials were used to produce working clothes for testing, which represented high brightness, medium brightness, low brightness, high chroma, medium chroma, and low chroma. Clothes were tried at the industrial settings for machine industry in a national industrial complex located in Gyeongsangnam-do and the expert satisfaction evaluation was performed based on items related with safety. As a result, higher satisfaction was shown when the brightness difference of top and bottom clothes was greater, and for chroma, relatively higher satisfaction appeared when the chroma of both top and bottom clothes was high. To secure satisfaction for both brightness and chroma, it is possible to deduce that the 2-color arrangement using the strong tone with high brightness and high chroma and the dark tone with somewhat low brightness and high chroma would be effective. Top and bottom clothes in the same color with high chroma had high visibility but had somewhat low evaluation for harmonious arrangements. This indicated that the arrangement of vivid colors for top-bottom clothes is inappropriate.

Consolidation Properties and In-Situ Stress of the Marine Clay in Southern Korea

A very soft ground constructed by dredging and hydraulic fill has characteristics such as high water content, high initial void ratio, and very little effective stress. Estimating, with thorough considerations about consolidation properties and the initial stress associated with each layer's distinctive stress history, is essential in order to predict a reasonable consolidation settlement of soft ground. By investigating a construction project for national industrial complexes at a coastal area in southern Korea that experienced reclamation and ground improvement adapting PVD, various laboratory tests to find consolidation properties were performed with undisturbed samples collected from the entire depth of the marine clay fill layer and original clay layer. Through the investigation, this report suggests relationships of heterogeneity of permeability in both vertical and horizontal directions, void ratio-effective stress, and void ratio-permeability. Considering the fact that the original clay layer was under the process of consolidation by load due to hydraulic fill from the top, estimating the appropriate initial stress of each layer is critical to predict the future process of consolidation settlement determined by time. In order to obtain the initial stresses of two layers with different stress histories related to consolidation, cone penetration and dissipation tests were conducted.

Evaluation of concentrations and source contribution of PM10 and SO2 emitted from industrial complexes in Ulsan, Korea: Interfacing of the WRF–CALPUFF modeling tools

The Ulsan metropolitan city in Korea includes two national industrial complexes [Ulsan Petrochemical Industrial Complex (UPIC) and On–San Industrial Complex (OSIC)] that produce various industrial products. Air pollution from these industrial complexes may pose potential health risks to nearby residential areas. Therefore, WRF–CALPUFF (Weather Research and Forecasting–California PUFF) modeling systems were used to simulate concentration distributions of typical air pollutants (PM10 and SO2), and statistics are computed to determine the models' ability to simulate observations. Finally, we classified the type of business and districts in the region and evaluated their contribution to air pollutant concentrations. Five statistical metrics [Index of Agreement (IOA), Fractional Bias (FB), Normalized Mean Square Error (NMSE), and Pearson correlation coefficient (R)] indicated that the simulated values using CALMET was determined to have sufficient reliability to predict CALPUFF, and simulated concentration field using CALPUFF showed a good agreement [typical values: IOA (0.284 to 0.850 for PM10, 0.412 to 0.895 for SO2), and FB (0.043 to 0.821 for PM10, –0.393 to 0.638 for SO2)] with the observed concentrations. The maximum concentrations of PM10 and SO2 using CALPUFF were predicted to be located around OSIC and UPIC, respectively. We compared the simulated values with observed values at 14 monitoring stations, and the SO2 tended to display better agreement to observed SO2 values than modeled and observed PM10. The source contribution analysis found that PM10 and SO2 were mostly influenced by group B (35.1%) including steel, machinery, and electronic industry nearby OSIC and group A (40.6%) including chemical industry nearby UPIC, respectively. Finally, the correlations between simulated concentrations of PM10 and SO2 and corresponding emission quantities were 0.663 and 0.528, respectively. Overall, the results of this study could be useful for designing appropriate seasonal regulations to reduce ambient concentrations of air pollutants and assisting environmental administrators to control the sources that contribute the most to degradation of air quality.

A comparative study of bias controlled benefit estimation for contaminated soil purification: case in Sihwa national industrial complex

A comparative study of bias controlled benefit estimation for contaminated soil purification: case in Sihwa national industrial complex

C-밴드 다중시기 SAR 위성 영상을 이용한 녹산국가산업단지 일대의 지반침하 관측

녹산국가산업단지가 설립된 부산 낙동강 하류는 국내에서 연약지반이 가장 깊이 분포하고 있는 지역 중에 하나이다. 연약지반의 깊이가 깊은 해안 매립지의 경우, 장기간에 걸쳐 상당히 큰 잔류침하가 발생하게 된다. 본 연구는 RADARSAT-1과 Envisat의 다중시기 SAR 영상을 이용한 차분간섭기법과 SBAS 시계열 기법을 통해, 녹산산업국가단지에서 2002년 9월부터 2007년 4월 동안에 발생된 지반침하를 관측하였다. 그 결과 연구지역의 동쪽 중앙, 서쪽 중앙, 서쪽, 해안가와 닿아있는 남단에서 최대 10 cm/yr, 평균 6 cm/yr의 속도로 지반침하가 발생되고 있음을 확인하였다. 또한 RADARSAT-1 SAR 영상을 이용한 평균지표변위도는 2001년부터 2002년까지 침하계로 관측된 현장관측자료와 비교 분석되었다. 시간에 따른 지표변위 양상이 거의 선형에 가깝게 나타나므로, 연구지역의 지반침하가 안정권에 접어들 때까지 지속적인 모니터링이 필요할 것으로 사료된다. Established in the lower reaches of the Nakdong river in Busan, the Noksan national industrial complex is one of the deepest soft ground areas in Korea. In case of the costal landfill having deep soft ground, there is a significant residual settlement over a long period of time. In this study, there was observed ground subsidence occurred in the Noksan national industrial complex from September 2002 to April 2007 by applying DInSAR and SBAS time series method using RADARSAT-1 and Envisat SAR datasets. As a result, it was calculated that ground subsidence developed at the velocity of about maximum 10 cm/yr and mean 6 cm/yr at the eastern center, west, western center and southern area contiguous on the coastline of the study area during the period from September 2002 to April 2007. In addition, the RADARSAT-1 average displacement map has been compared with the total displacement map observed by accurate magnetic probe extensometer during the period from 2001 to 2002. Since the time series displacement has shown a linear trend mostly, we consider that continuous monitoring should be needed until the ground subsidence of the study area has been stabilized.

Reading Culture of Industrial Workers in the National Industrial Complex - Case studies of Siheung Smart Hub Complex -

Reading Culture of Industrial Workers in the National Industrial Complex - Case studies of Siheung Smart Hub Complex -

구미 불산 누출사고로 인한 주변지역 환경영향권 설정에 관한 연구

Objectives: On September 27, 2012, leakage of anhydrous hydrofluoric acid occurred in a chemical plant in the Gumi National Industrial Complex. Following the accident, local factory workers and residents complained of abnormal health conditions. In addition, visual discolorations were widely observed in crops and trees in surrounding areas. The main objectives of the present study were to identify the area that was affected by the spill using data obtained from plants, soil, and water samples after the accident. Methods: Fluoride concentrations were analyzed in pine tree needles, soil, nearby streams, ponds and reservoirs collected from an area within a radius of three kilometers from the plant where the leak occurred. Fluoride concentrations in the air at the time of leakage were then estimated from fluoride concentrations that were measured in the pine tree needles. A Kriged map was developed to describe the spatial distribution of hydrofluoric acid at the time of the leakage and was compared with the area designated as a Special Disaster Zone by the government. Results: The Special Disaster Zone did not include all the affected area that was estimated by the Kriged map. Analytical results of the environmental samples also supported this discrepancy. Conclusion: Using plants, atmospheric concentrations of fluoride at the time of the leakage could be estimated. For the area that was identified as affected, further public health risk assessment and environmental risk assessment should be considered. Also, in the absence of air monitoring at the time of leakage, studies employing plants may be conducted in order to better understand the spatial extent and severity of the contamination.

진주시 소방서비스 취약지역 개선을 위한 소방권역 조정

This study analyzed the vulnerable areas to the fire service in regard to 119 safety centers, currently established in Jinju city. In this study, the district of fire was examined through the analysis of the OD cost matrix to find the transference or increase methods of the existing centers for improving the fire services. The study results demonstrate that the numbers of 119 safety centers were lacking in comparison with the areas of the administrative district in Jinju. In particular, relocation and the transference or increase of centers were required for the Cheonjeon 119 safety centers, which is the creation area of the National Industrial Complex among five 119 safety centers located in Jinju, and the fire service jurisdiction of Munsan 119 safety centers (including Banseong 119 regional unit), which is the location of a big fire risk due to the increase of population according to the development of the new town. In addition, the OD cost matrix analysis in this study reveals the fact that the time of fire service in the Jeonchon Industrial Complex, which is the significantly vulnerable area, will be reduced from 8 minutes to 3.3 minutes if the current Cheonjeon 119 safety center is moved to Gaho-dong. It indicates that the increase of safety centers in Geumsan-myeon areas, where the population has increased rapidly in recent days due to the development of the new town, is keenly needed.

비오톱의 보전가치 평가도구(B-VAT) 개발과 적용

ABSTRACT The purposes of this research are：to analyze biotop type and carry out conservation value assessment in study areas, Daegu Science Park national industrial complex; to supply basic data for the landscape ecological planning; and to improve the application of assessment model with the development of Biotop Value Assessment Tool (B-VAT). The result is as follows. First of all, the field survey showed 434 species of flora and 220 species of insecta. According to the result of biotop type analysis in the biotop classification system with field survey, 13 biotope groups and 63 biotope types were classified. In the map of biotop type classification, readjusted farmland biotop(FA) was prevalent and forest biotop(E) was shown to the southeast side of the site. Next, according to the first assessment with B-VAT, total 19 biotop types including natural river(BA) with abundant plants had Ⅰgrade and total 16 biotop types such as vegetable garden adjacent to river(BC) had Ⅴgrade. In terms of the second assessment, we analyzed total 30 areas,

Assessment of heavy metal contamination and its ecological risk in the surface sediments along the coast of Korea

Ra, K., Kim, E.-S., Kim, K.-T., Kim, J.-K., Lee, J.-M., and Choi, J.-Y., 2013. Assessment of heavy metal contamination and its ecological risk in the surface sediments along the coast of Korea.We studied the spatial distribution of heavy metal contamination and its ecological risk assessment in sediments from the Korean coast. Surface sediments collected from 12 coastal zones of Korea (total 200 sediment samples) along the west, south and east coast of Korea have been analyzed for heavy metals including Cr, Co, Ni, Cu, Zn, As, Cd, Pb and Hg using ICP-MS. Mean concentrations were 58.3 mg/kg for Cr, 10.2 mg/kg for Co, 24.3 mg/kg for Ni, 36.5 mg/kg for Cu, 122 mg/kg for Zn, 9.1 mg/kg for As, 0.25 mg/kg for Cd, 35.0 mg/kg for Pb and 0.046 mg/kg for Hg, respectively. Sediments sampled from heavily industrialized areas such as Shihwa, Masan, Gwangyang and Ulsan were highly contaminated with Cu, Zn, Cd and Hg. Significantly positive correlation among metals were observed (p<0.01). This suggests that sources of metal contamination were mainly attributed to anthropogenic inputs from surrounding environment, especially national industrial complexes that consist of iron, steel, machinery, electronics and petrochemical. The results of metal assessment indices indicated that the Korean coast sediments were moderately contaminated with Cu, Zn, As, Cd, Pb and Hg. The mean of metal enrichment levels decreased following the order of Cu>Hg>Cd>Zn>As>Pb>Co>Cr>Ni. Based on the comparison with sediment quality guidelines (SQGs), Cu, As and Zn levels at more than 40% of sediment samples exceeding TEL values are likely to result in potential adverse effects on sediment-dwelling organisms.