Nasolabial Angle Research Articles

Comparison of Nasal Anthropometric Measurements of Turks Living in Different Geographical Regions

Aim: Determining the anthropometric characteristics of the nose, which is located in the center of the face, plays an important role not only in surgical procedures but also in identifying ethnic differences. This study aimed to examine the nasal similarities and differences between Kazakhs and Turks who have lived in different regions for more than a thousand years. Material and Methods: The study included 200 Turkish students and 200 Kazakh students. For each student, sixteen distance measurements and five angle measurements of the nose were taken. The photographs were taken using a digital camera mounted on a tripod, with a distance of 1.50 meters between the photographer and the student participating in the study. Digital photographs of the front, left side, and base of the nose were taken in the Frankfurt Horizontal Plan, which is the standard head position. The photographs were transferred to the DIGIMIZER software, where measurements were made using anthropometric points previously determined. Results: The findings reveal that among both societies, nasal measurements tend to be greater for males compared to females. Conversely, females exhibit higher nasofrontal (p=0.001) and nasolabial (p=0.001) angles compared to males. Moreover, Turks generally exhibit greater nasal length (p=0.001), width (p=0.001), and height (p=0.037) than Kazakhs, whereas tend to have lower nasofrontal (p=0.001) and nasolabial (p=0.001) angles than Kazakhs. Conclusion: Nasal anthropometric measurements for males were generally higher than for females. In addition, all measurements differed between Turks and Kazakhs. The results of this study will be useful for future anthropometric studies.

Quantitative Assessment of Lip Morphology in Patients With and Without Cleft Lip and Palate Using 3-Dimensional Stereophotogrammetry.

This study aimed to assess and quantify the morphologic characteristics of the lips and the lower third of the face in cleft and noncleft patients, utilizing three-dimensional (3D) stereophotogrammetry. Sixty patients were included in the study, comprising 30 unilateral cleft lip and palate patients (G1, 24 female, 6 male; aged 20 to 60y, mean age 44.0±12.0y) and 30 noncleft patients (G2, 23 female, 7 male; aged 20 to 59y, mean age 43.5±12.0y). Anthropometric landmarks were identified on the facial surface. Three-dimensional stereophotogrammetry was employed to capture images. Statistical analysis was conducted to compare the groups, with a significance level set at 0.05. The comparative analysis revealed statistically significant differences in 5 linear and 6 angular measurements. Linear measurements such as philtrum width, upper and lower cutaneous lip height, mandibular ramus length, and midfacial depth exhibited significant differences between cleft and noncleft patients. Similarly, angular measurements, including upper lip angle, Cupid's bow angle, lower/medium face convexity, lip seal, nasolabial angle, and left gonial angle, displayed statistically significant disparities. These findings underscore the ongoing surgical challenges in the comprehensive rehabilitation of patients with clefts, highlighting the critical need for continued advancements in treatment strategies.

Can the Upper Vermilion and the Nasolabial Fold Be Changed With Orthognathic Surgery?

BackgroundRetrusive profiles show an appearance of aging with an under-projected vermilion and pronounced nasolabial folds due to deficient bone support. PurposeA study was made of the association between orthognathic surgery and changes in the nasolabial and vermilion areas in patients with retrusive profiles. Study design, setting, sampleA retrospective cohort study evaluated patients subjected to bimaxillary surgery according to the Barcelona Line (BL) protocol during 2021 at Teknon Medical Center (Barcelona, Spain). Subjects with craniofacial syndromes, facial aesthetic procedures, and dental rehabilitations involving lip changes, were excluded. Predictor variableThe predictor variable was the timing of cephalometric measures, reported as T0 (preoperatively), T1 (one month after surgery), and T2 (after one year of follow-up). Main outcome variableThe outcome variable corresponded to the soft tissue changes of the nasolabial and vermilion area, reported as the nasolabial fold length and angle, nasolabial angle, upper lip concavity, vermilion length, and upper lip sagittal distance from BL. CovariatesThe covariates comprised patient demographic data, the surgical-orthodontic protocol, and the magnitude and direction of the skeletal movements. AnalysesDescriptive and inferential analyses were performed based on analysis of variance (ANOVA), the Bonferroni test, Pearson’s linear coefficient, the nonparametric Mann-Whitney U-test, Kruskal-Wallis test, and multiple linear regression models. Statistical significance was considered for p < 0.05. ResultsThe sample comprised 27 subjects with a mean age of 32.5 ± 11.2 years. A mean decrease in nasolabial angle of 5.5 ± 6º was recorded (p < 0.001), with a shortening of the nasolabial fold length of 4.4 ± 7.6 mm (p=0.019). An increase in upper lip concavity angle of 14.4 ± 12º was recorded (p < 0.001), along with a vermilion lengthening of 1.6 ± 1.3 mm (p < 0.001) and an increase in upper lip sagittal distance to BL of 5.7 ± 7.3 mm (p=0.001), indicating a more projected and everted upper vermilion. Conclusions and relevanceWhen adequate dentoskeletal support is provided by specific positional changes of the jaws planned through orthognathic surgery, the length of the nasolabial fold decreases, and the upper vermilion lengthens and becomes slightly everted.

Case Study: Facemask Protocol for Growing Patient

This case report describes the orthodontic treatment of a 9-year-old Egyptian male with a Class III incisor relationship and skeletal Class III base, characterized by a -3 mm reverse overjet, 70% reverse overbite, and masticatory difficulties. The patient exhibited full unit Class III molar relationship, unclassified canine relationship, lower and upper crowding, concave profile, acute nasolabial angle, and competent lips. Treatment involved two phases: Phase 1 utilized an orthopaedic appliance (facemask) with banded hyrax and posterior acrylic bite planes, while Phase 2 employed upper and lower fixed pre-adjusted edgewise appliances with MBT prescription and class III elastics. This comprehensive approach aimed to address the malocclusion effectively and achieve improved dental alignment and facial aesthetics.

Unified Denovo Multipurpose Analyzer

Tooth movement is affected by various factors like magnitude, direction, and the duration of the forces applied; the direction of force plays the most pivotal part. Orthopedic appliances have long been used to apply extraoral traction forces to entirely limit or redirect the growth of the maxilla and mandible. Here, we present a very simple and efficient device. The multipurpose analyzer (MPA) is used to locate the center of resistance of maxilla and maxillary dentition, giving a more accurate direction of force vector in facemask and headgear cases. It is also used as chairside device clinically to measure facial heights, nasolabial angle, mentolabial angle, and mandibular plane (MP), as well as to measure cephalometrically MP, Frankfort horizontal (FH)–MP, palatal plane (PP)–MP, occlusal plane (OP), and MP during analysis.

Esthetic analysis of upper lip morphology variation after the cross-arch fixed restoration of maxillary implant-supported prostheses via radiographic methods

Objective: To measure and analyze upper lip morphology variation before and after the cross-arch fixed restoration of the maxillary implant-supported prostheses using cone- beam CT (CBCT) to provide an esthetic objective reference for maxillary edentulous patients. Methods: There were 32 maxillary edentulous patients selected in the Department of Dental Implantology, The Affiliated Stomatological Hospital of Nanjing Medical University from January 2010 to December 2023. The CBCT data of patients with maxillary full-arch implant-supported fixed prostheses were retrospectively collected before implantation (T0), at the time of radio-guide insertion (T1), and after final repair (T2). The length and thickness of the upper lip were measured and analyzed at each time point, and the correlation between the upper lip contour data and facial esthetic parameters was analyzed. Results: After the final prosthodontic treatment, the length of the upper lip was significantly increased from (21.72±2.84) mm to (24.98±2.93) mm (t=-8.13, P<0.001) compared with that before implant treatment. The widths of the middle and vermilion of the upper lip (Sm-Hm/Ls-UP), were reduced from (13.24±1.41), (12.81±1.67) mm to (11.36±1.67), (10.21±1.69) mm, with significant differences (t=7.79, P<0001; t=9.37, P<0.001). The lower face height (Sn-Gn) was increased from (54.52±4.95) mm to (58.70±4.42) mm, with significant differences (t=-11.05, P<0.001). However, the nasolabial angle reduced significantly from 95.35°± 7.70°to 90.53°±7.28°(t=7.68, P<0.001). The width of the middle of the upper lip with a radiation guide was (10.94±1.24) mm, and it increased significantly compared with that after the final prosthesis treatment (t=-0.76, P<0.05). The proportion of straight upper lip profiles accounted for 59% (19/32), and the proportion of concave upper lip profiles accounted for 41% (13/32) after the final prosthesis treatment. In addition, the results of correlation analysis showed that the nasolabial angle variation was weak and negatively correlated with residual bone height (r=-0.37, P=0.490). Conclusions: After the treatment of the maxillary full-arch implant-supported fixed prosthesis, the length of the upper lip increases, and the thickness of the upper lip becomes significantly thin. The maxillary full-arch implant-supported fixed prostheses support upper lips to improve the patients' side appearances.

Aesthetic perception of patient in developmental age in interceptive orthodontic treatment.

Patients at development age show considerable attention to the shape of the face from both an aesthetic and relational point of view, to arouse interest from researchers. There are few studies related to profile analysis in patients of developmental age. Therefore, the objective of the present study was to analyse the importance of the aesthetic perception of the patient in development age in relation to the profile, before and after interceptive orthodontic treatment. A sample of 25 patients who came to our observation for dentoskeletal malocclusions was considered. A questionnaire was proposed to each patient, before and after the interceptive orthodontic treatment (T0 and T1), to evaluate the aesthetic perception before and after the orthodontic treatment and its psychosocial impact. Profile analysis was performed using photographic documentation (at T0 and T1). The variables considered were the Ricketts line, the facial convexity angle, the nasolabial angle, and the labiomental angle. Interceptive orthodontic treatment has proven to be of valid clinical and psychological help. This result is confirmed by the complete aesthetic satisfaction of the patient in the frontal and latero-lateral planes.

Nasal profile changes after LeFort I osteotomy (maxillary advancement) with and without ANS reduction in class III skeletal patients: a study protocol for a randomized clinical trial

BackgroundDentofacial malformation is a common condition that affects a significant portion of the population, resulting in functional and aesthetic defects. Orthognathic surgeries, such as LeFort I osteotomy, are performed to correct these abnormalities. However, the impact of these surgeries on nasal profile changes remains unclear. Additionally, the role of anterior nasal spine (ANS) reduction in maxillary advancement surgeries of 3–5 mm range is yet to be determined. This study aims to investigate the effect of ANS reduction on soft tissue profile changes following LeFort I osteotomy with a maxillary advancement range of 3–5 mm in class III skeletal patients. The hypothesis is that the changes in nasolabial angle and upper lip length will not significantly differ between patients who undergo LeFort I osteotomy with and without ANS reduction.Method and designThis study is designed as a randomized controlled trial. A total of 26 class III skeletal patients with maxillofacial abnormalities will be recruited from the maxillofacial clinic of Bu-Ali and Farahikhtegan Hospitals in Tehran, Iran. Patients meeting the inclusion criteria will be randomly assigned to two groups: one group will undergo LeFort I osteotomy with ANS reduction, and the other group will undergo LeFort I osteotomy without ANS reduction. The soft tissue profile changes, specifically the nasolabial angle and upper lip length, will be evaluated and compared between the two groups.DiscussionAchieving facial harmony through orthognathic surgery requires careful planning and consideration of the impact on surrounding soft tissue. The primary objective is to predict and plan for the effects on the nasolabial region. LeFort I osteotomy is a common procedure used to correct dentofacial deformities, particularly in class III patients. Maxillary advancement during this surgery can lead to changes in nasal tip position, width, and rotation, potentially due to repositioning of the anterior nasal spine and soft tissue dissection. In this study, soft tissue changes will be assessed in non-growing class III patients using cephalometric radiographs. The impact of reducing the anterior nasal spine (ANS) on nasal profile changes will be investigated for maxillary advancements of 3–5 mm. Objective measurements and patient-reported outcomes will be evaluated to gain insights into the aesthetic outcomes of orthognathic surgery. The findings will provide valuable guidance for treatment decisions and alternative options based on expected nasal profile changes.Trial registrationThis project was registered at The Iranian Registry of Clinical Trials (Identifier No. IRCT20210928052625N1, Website: https://www.irct.ir/trial/59171) and Open Science Framework (OSF) (Registration https://doi.org/10.17605/OSF.IO/X3HD4). 2021-06-09.

Comparison of 1 Year Nasal Tip Projection Results of Triple Cartilage Combining Suture (Flexible Tongue-in-Groove) and Classical Tongue-in-Groove Techniques.

Objectives: In the present study, we compared patient satisfaction with classical tongue-in-groove (TIG) technique and triple cartilage combining suture (TCCS; flexible tongue-in-groove) techniques applied to the nasal tip in rhinoplasty. Methods: In this retrospective study, 80 patients who underwent rhinoplasty operations with TIG or TCCS techniques applied to the tip region were included. There were 40 patients in both groups. All patients in groups 1 and 2 were evaluated by the criteria written below at preoperative, postoperative first month, and postoperative first year: (1) Rhinoplasty Outcomes Evaluation Questionnaire (ROE), (2) tip projection (cm), (3) nasal dorsum length (cm), (4) tip projection ratio (Goode), (5) nasofrontal angle, and (6) nasolabial angle. Results: The patients were followed up at 84.32 ± 19.38 months in the TIG group and 87.47 ± 18.01 months in the TCCS group. Our results showed that preoperative, postoperative first-month, and first-year tip projection (P = .013, P = .022, and P = .020, respectively), and nasal dorsum length values (P = .009, P = .020, and P = .020, respectively) of the TCCS group were significantly lower than those in the TIG group. There was a positive correlation between the postoperative first month and postoperative first year ROE scores. Lower preoperative tip projection ratio (Goode) values and higher nasolabial angle values were related to higher ROE scores showing patient satisfaction. Conclusion: For the patient satisfaction after tip rhinoplasty, lower projection ratio (Goode) and higher nasolabial angle values were related to ROE scores. Although there are no significant results, lower tip projection results in the TCCS group may be related to more patient satisfaction due to natural appearance.

Incisor and Soft Tissue Characteristics of Adult Bimaxillary Protrusion Patients among Different Skeletal Anteroposterior Classifications.

The objective of this study was to investigate the upper incisors (U1), lower incisors (L1), and soft tissue profiles of bimaxillary protrusion (BM) adult patients among skeletal Class I (BM1), II (BM2) and III (BM3). Understanding these characteristics would be useful for incisor and lip diagnostics in different skeletal classifications. Fourteen linear and twelve angular variables of the incisors and lips were evaluated in 214 lateral cephalograms (BM1 = 91, BM2 = 84, BM3 = 39). ANOVA and Bonferroni tests compared the measurements. BM1 and BM3 exhibited a greater U1 position and U1 inclination than the norms, while BM2 presented only a greater U1 position than the norms but normal U1 inclination. BM1 and BM3 had a significantly greater U1 position than BM2. BM1 and BM2 demonstrated a greater L1 position and L1 inclination than the norms, whereas BM3 displayed only a greater L1 position than the norms but normal L1 inclination. BM2 had the most anterior L1 position, whereas BM3 had the least anterior position. Only BM2 had a longer anterior dental height (ADH) than the norms, while BM1 and BM3 had a normal ADH and the significantly shortest ADH, respectively. Only BM1 had a normal upper incisor display at rest (U1R), while BM2 and BM3 displayed an increased and decreased U1R, respectively, with significant differences among the three groups. The most significantly protruded upper and lower lips were presented in BM2, but these were exhibited the least in BM3. The most significant acute nasolabial angle (NLA) was found in BM3, whereas BM2 presented the least acute NLA. A normal lip-chin-throat angle (LCTA) was observed in BM1 and BM3, while only BM2 had a greater LCTA than the norms. The most significant obtuse LCTA was found in BM2, while BM3 had the least obtuse LCTA. Therefore, both U1 and L1 in all groups presented protrusion and proclination, except for U1 in BM2, while L1 in BM3 exhibited normal inclination. The ADH and U1R were increased in BM2 but decreased in BM3. The most acute NLA was found in BM3, whereas the least acute was found in BM2. The most obtuse LCTA was in BM2, while the least was in BM3.

A Differential Analysis of Preferred Feminine Facial Contours for Transfeminine Individuals.

Facial feminization surgeries are important gender-affirming procedures for transfeminine individuals. The literature provides guidance on classically feminine facial features but the aesthetic preferences of transgender patients have not been studied. This study aimed to define the preferred feminine facial proportions of transfeminine patients and compare them to a mixed population of US adults. An online survey was designed consisting of virtually modified images with progressive degrees of change in 6 facial features: forehead, nasal dorsum, chin projection, nasolabial angle, mandibular angle, and chin height. It was administered to transfeminine patients in a large-scale health system as well as the general population using an online market research instrument. Respondents ranked each image on a 7-point Likert scale from "very unattractive" to "very attractive" for a feminine face. Both groups agreed that a moderately convex forehead without supraorbital ridge prominence, slightly sloped nasal dorsum, ∼105-degree nasolabial angle, and decreased chin height were considered most attractive. In addition, very concave nasal slope and ∼110-degree nasolabial angle were rated significantly higher by transfeminine respondents compared with controls. The most classically masculine versions of each feature were considered significantly more unattractive by transfeminine patients when compared with controls. Transfeminine individuals share significant preferences in feminine facial features with control respondents. However, transfeminine patients were more averse to traditionally masculine features on a feminine face and more accepting of the most traditionally feminine versions of nasal contours. Understanding these differences can facilitate surgical planning between surgeons and patients and potentially improve patient satisfaction.

Comparison of Facial Angular Measurements Between Males and Females Presenting at a Tertiary Care Hospital

Background and Objective: The effectiveness of orthodontic diagnosis and treatment planning is dependent on an accurate assessment of the patient's soft tissue profile. The objective of the study was to compare the facial angular measurements between males and females.Methods: The study comprised 100 volunteers (50 males and 50 females) ranging in age from 12 to 16 years. The respondents were chosen through convenience sampling technique from orthodontics department of children hospital Lahore. Cephalometric and photographic profile analysis was used, with angular measurements based on standard cephalometric and photographic records taken in natural head position. The study included four factors in total.Results: The mean cephalometric and photographic naso-frontal angle was 121.050 and 121.030 respectively, where as cephalometric and phographic measurement in females were 122.240 and 122.840 respectively.Conclusion: There was no significant difference in angular measurements between two genders.Keywords: Photographic analysis, Cephalometric analysis, Naso-labial angle, Naso-mental angle, Naso- frontal angle, Naso-facial angle

Soft-tissue profile changes in adult patients treated with premolar extractions

The objective of this study was to identify the soft-tissue profile changes and the potential pretreatment cephalometric parameters that clinicians could use to predict the lip response after premolar extraction treatment in adult patients. Pretreatment and posttreatment lateral cephalograms of 75 white patients treated with premolar extractions were analyzed. The following initial cephalometric measurements were recorded: upper and lower lip to E-plane, vermilion thickness, lip length, maxillary and mandibular incisor inclination, and mentolabial and nasolabial angle. Pretreatment and posttreatment radiographs were superimposed using the Björk structural method to record lip retraction and incisor/lip retraction ratio. Pearson correlation and Kruskal-Wallis tests were used to compare lip retraction and incisor/lip retraction ratio with the cephalometric variables. The sample was divided according to different extraction patterns. The mean upper and lower lip retraction values were 1.4 mm and 1.7 mm, respectively. Vermilion thickness showed a negative and statistically significant correlation (P<0.05) with lip retraction and incisor/lip retraction ratio. In addition, the mean incisor/lip retraction ratio was 61% and 98% for the upper and lower thin lip, respectively, whereas the mean incisor/lip retraction ratio was 17% and 44% for the upper and lower thick lip, respectively. The comparison among extraction patterns did not highlight any noticeable difference. The choice of a specific extraction pattern did not impact lip response. The vermilion thickness was the key factor influencing lip retraction: an increase in this parameter was related to a decrease in lip retraction and vice versa.

Correlating Jaw Bone Growth and Nasal Morphology Among Adult Patients With Cleft Lip and Palate: A Retrospective Cephalometric Study.

This retrospective cross-sectional study reviewed adult patients with operated cleft lip and/or palate (CL/P) and normal control, and performed comprehensive craniofacial and nasal morphological analyses based on lateral cephalometric radiographs. Pearson or Spearman correlation coefficient assessed intraclass correlation. Seven hundred fifty-seven operated patients with CL/P, and 165 noncleft normal controls were enrolled. Among the normal and CL/P groups, S-N-A angle registered positive correlations with nasal base prominence (S-N'-Sn, degrees). Upper facial height (N-ANS, mm) had positive correlations with nasal dorsum length (N'-Prn, mm) and nasal bone length (N-Na, mm). Although in patients with bilateral cleft lip and palate, there were moderate negative correlations ( r =-0.541, P <0.05) with soft tissue facial profile angle (FH-N'Pog', degree) and nasolabial angle (Cm-Sn-ULA, degree). Correlation exists between the morphology of jaw bones and external nose among patients with CL/P. Maxillary sagittal insufficiency is associated with concave nasal profile, and maxilla height is associated with nasal length.

Effects of modified twin block appliance in growing Class II high angle cases: A cephalometric study

Background Class II malocclusions represent anteroposterior dysplasia usually resulting from mandibular retrusion. Along with a retropositioned mandible, it can be associated with either upward or backward jaw rotation. High angle cases are often associated with a short ramal height, steeper mandibular plane, and large gonial angle. Twin block is a commonly used myofunctional appliance that incorporates bite planes that direct the occlusal forces in a more favorable direction for correction of the retrognathic mandible. We aimed to evaluate skeletal, dental, and soft tissue changes following modified twin block appliance therapy in high-angle cases. Methods A cephalometric study was performed on 15 growing (10-14 years) high angle (Frankfort mandibular angle 28-35°) Class II Division I malocclusion patients undergoing twin block therapy. Skeletal, dental, and soft tissue changes were evaluated by cephalometric analysis using Dolphin software. Results Pre- and post-treatment changes in cephalograms were assessed by analysis of variance and paired t-test. Significant changes in the position of the mandible (angle between Sella-Nasion-Point B [SNB] increased by 3.9 degrees, P=0.02), Wits appraisal (decreased by 1.54 mm, P=0.04), maxillo-mandibular relationship (angle between Point A-Nasion-Point B [ANB] decreased by 3.74 degrees, P=0.02) were observed. Soft tissue changes like the nasolabial angle were also significant, increasing by 3.8 degrees (P=0.04) and lower lip relation to E-line (reduction in lower lip protrusion) by 2 mm (P=0.04). Vertical parameters showed non-significant changes, like the Frankfort mandibular angle (FMA) increased by 0.07 degrees, (P=0.67), the angle between Sella-Nasion and Gonion-Gnathion (SN-Go-Gn) increased by 0.33 degrees, (P=0.67), Y-axis increased by 0.2 degrees, (P=0.32). The upper incisor inclination decreased non-significantly from 115.27±1.33 to 113.42±1.65 degrees, (P=0.12) and lower incisor increased non-significantly from 100.13±2.23 to 101.80 ±1.37 degrees, (P=0.08). Conclusions Modified twin block appliance can be used to successfully treat Class II Division I high angle cases with good vertical control.

3-Dimensional Evaluation of Two PNAM Techniques (Modified Grayson & AlignerNAM) on Facial Soft Tissue Morphology: A Randomised Clinical Trial.

Evaluate facial changes after Presurgical Naso-Alveolar Molding (PNAM) in unilateral cleft lip and palate (UCLP) patients treated with Modified Grayson Technique and AlignerNAM (with DynaCleft nasal elevator) using a 3D facial scan. Randomised clinical trial. Institutional study. Participants: 20 UCLP patients allocated to two groups (10 patients each). Group A patients underwent PNAM with Modified Grayson Technique and Group B patients underwent AlignerNAM (with DynaCleft nasal elevator). Their 3D facial scans were obtained by using an iOSbased application (Bellus3D FaceApp) mounted on a novel frame. These .stl files were analysed using 3D software (GOM INSPECT) at three-time intervals; before intervention (T0), after intervention (T1) and one month after lip repair surgery (T2). Changes in facial and nasolabial morphology. Both techniques brought significant improvement in the columellar length, nasal tip projection, columella angle, nasal tip angle and a significant reduction in cleft width. At T1, a statistically significant difference in angular and linear measurements was present in both groups. At T2, no statistically significant difference in linear parameters was observed between the two groups except for the outer lateral height of the non-cleft side, basal lateral height of the non-cleft side, and philtrum width. Similar pattern was observed in angular measurements with no statistically significant difference between the two groups except in nasolabial angle, anterior nasal base triangle III, and anterior nasal root triangle. Aligner NAM and Modified Grayson technique are equally effective PNAM methods with similar clinical results in nasolabial morphology after lip repair surgery.

Effects of polymethyl methacrylate-based bone cement graft for treating excessive gingival display and its dimensional facial changes: 12-Month clinical study

Objectiveto present a 12-month follow-up with photographic and tomographic analyses of the effect of polymethyl methacrylate-based bone cement graft (PMMA) in gingival exposure (GE) in patients with excessive gingival display (EGD). MethodsTwelve patients with EGD were included. The PMMA was surgically placed. A frontal and lateral photograph protocol was performed at baseline (T0), 3 (T3), 6 (T6), and 12 months (T12) post-operatively. Soft tissue cone-beam computed tomography (ST-CBCT) was performed at T0 and T12. Measures included GE, length of the lip vermilion (LLV), lip shape (LS), nose width (NW), filter width (FW), nasolabial angle (NAS) while smiling, and nasolabial angle at rest (NAR). The height, thickness, and volume of the cement graft were also measured in the ST-CBCT. The comparisons were performed by Kruskal-Wallis test at 5 % of significance (p < 0.05). ResultsThe height, thickness, and volume of the PMMA were respectively 12.84 ± 1.59 mm, 3.83 ± 0.53, and 1532.02 ± 532.52 mm3. PMMA significantly decreased GE from 8.33 ± 1.25 mm (T0) to 6.60 ± 0.93 mm (T12) (p < 0.01). NAR was 98.34 ± 9.28° at T0 and increased to 105.13 ± 7.33° at T12; however, the angle value was not statistically different (p = 0.08). LLV, LS, NW, FW, and NAS did not exhibit statistical differences between the baseline and follow-up periods. ConclusionsPMMA significantly decreased GE in a 12-month follow-up without influencing adjacent soft tissue anatomical structures.

Nasal Morphology in a Young Adult Middle-Eastern Population: A Stereophotogrammetric Analysis.

This study aimed to describe gender-specific three-dimensional morphology of the soft-tissue nose in Lebanese young adults and to explore the associations between nasal morphology with age and body mass index (BMI). Three-dimensional photographs were captured for 176 young healthy Lebanese adults (75 males and 101 females) aged 18.1-37.68 years. Linear and angular nasal measurements were computed and compared between genders, in addition to other established norms. Associations with age and BMI were also assessed. All linear measurements were greater in males than in females, and only the nasolabial angle was significantly larger in females by 2.97 degrees on average. Most of the measurements were found to be larger than the Caucasian norms. A few significant correlations were found between the measurements and age or BMI. This study is the first to present the sex-specific norms for nasal morphology in the Lebanese population and highlights the presence of gender dimorphism in the majority of measurements. Additional studies are needed to validate our data and expand the associations with age and BMI. The data offered in this study could help enhance the accuracy of facial reconstructive surgery and aid in personalized treatment planning for both medical and cosmetic nasal interventions. How to cite this article: Saadeh M, Shamseddine L, Fayyad-Kazan H, et al. Nasal Morphology in a Young Adult Middle-Eastern Population: A Stereophotogrammetric Analysis. J Contemp Dent Pract 2024;25(3):199-206.

Ethnic variation in lower face anthropometry on facial computed tomography scans for patients seeking facial feminization surgery

BackgroundFacial feminization surgery (FFS) is the most common form of facial gender-affirming surgery. One of the current knowledge gaps is the understanding of racial group differences in baseline craniofacial norms for transgender and nonbinary patients. MethodsAll patients who sought consultation for FFS with a completed craniofacial computed tomographic (CT) scan at a single institution between the years of 2018 to 2023 were included. Patients with previous facial surgeries were excluded. Chart reviews were conducted for patient characteristics, including race, age, hormone therapy duration, and prior gender-affirming surgeries. Racial categorizations included White, Latinx, African American, or Asian. Patients with other or multiracial identity were excluded. Measurements of the lower face were derived from preoperative facial CT scans. Comparative analyses were performed on all measurements between racial groups. Results204 patients were included with an average age of 32.0±10.2 years and a median hormone duration of 2.0 years. Notable racial group differences were: 1. Zygomatic width was largest in Asian patients (13.5±0.6cm) compared to all other racial groups (p=0.03), 2. Nasolabial angle was smallest in African American patients (82.5±13.1 degrees, p<0.001), 3. Lower face height was largest in African American patients (6.9±0.7cm, p<0.001) and 4. Lateral mandibular flare was largest in African American patients (0.4±0.1cm) and smallest in Latinx patients (0.2±0.1cm, p<0.001). ConclusionsSpecific target areas of FFS should be carefully considered to account for possible baseline ethnic differences. Relative facial proportions may also be a more salient surgical planning tool for TGNB patients rather than absolute measurements alone.

Binder Phenotype—Prenatal Diagnosis, Management, and Postnatal Outcome: Insights from a Case Series and Updated Review of the Literature

AbstractBinder phenotype (BP) or maxillonasal dysplasia is a developmental disorder of the anterior part of the maxilla and nasal complex and is characterized by a short nose with a flat nasal bridge, short columella, acute nasolabial angle, perialar flatness, convex upper lip, and tendency to a class III malocclusion. The etiology of BP is heterogeneous with diverse features and outcomes. The ultrasound features of BP are midfacial hypoplasia with verticalized nasal bones, short columella with flattened tip and alar wings, and the nasofrontal angle measuring &gt;140 degrees. In this case series, we present seven cases of BP detected antenatally, their varied etiology, management, and outcomes with a 2-year follow-up. We conclude that the diagnosis of facial dysmorphisms, such as BP, brings a lot of apprehension and agony in the parents amounting to multiple tests and counseling sessions. Physiognomy which is the normal familial appearance should be considered before concluding whether the observed feature is normal or pathological. Accurate diagnosis, adequate testing, and personalized counseling will help in the prevention of needless termination of pregnancies and ensure an optimal perinatal outcome.