NASA-ISRO Synthetic Aperture Radar Mission Research Articles

Uncertainty estimates in the NISAR high-resolution soil moisture retrievals from multi-scale algorithm

It is important to know the amount of systematic and random uncertainties in any state variable to improve its geophysical application potential. The expected high-resolution (200 [m]) soil moisture product from the NASA-ISRO Synthetic Aperture Radar (NISAR) mission is no exception. Thus, knowing the quality of the soil moisture retrievals through the estimation of various error sources is imperative. The estimation error sources in soil moisture retrievals can be obtained by various methods. In situ measurements provide a reliable estimate of the uncertainty of soil moisture retrievals. However, in situ measurements are available only for limited locations, as they are typically very tedious and expensive to obtain. Thus, an analytical approach has been developed to obtain an estimate of the uncertainty in the soil moisture retrievals that vary in space and time across grid-cells. This uncertainty estimation is specifically developed for the multi-scale algorithm of the upcoming NISAR mission, which will provide soil moisture retrievals at 200 [m] resolution. The multi-scale algorithm for the NISAR mission disaggregates the coarser resolution soil moisture (∼9 [km]) to high-resolution (∼200 [m]) using NISAR L-band SAR measurements. However, uncertainty in high-resolution soil moisture retrievals might be introduced due to errors in input datasets (e.g., coarse resolution soil moisture, instrument error of SAR, etc.) and multi-scale algorithm parameters. Therefore, this study carried out a detailed sensitivity analysis of input datasets and algorithm parameters using the proposed approach. The sensitivity analysis shows that error in the input coarse resolution soil moisture is one of the primary drivers of uncertainty in the high-resolution soil moisture retrievals. The other portion of the uncertainty comes from errors in the algorithm parameters, and noise in SAR co-pol and cross-pol backscatter observations. Furthermore, the approach was tested on the UAVSAR L-band data time-series that had been simulated to closely match the expected characteristics of NISAR (e.g., spatial resolution and noise). The uncertainty estimates in UAVSAR-based high-resolution retrievals were compared with the SMAPVEX-12 in situ measurements. The uncertainties estimated for different crops were found to be close to the ubRMSE metric, which is also lower than the NISAR mission accuracy goal (0.06 [m3/m3]).

A multi-scale algorithm for the NISAR mission high-resolution soil moisture product

This study proposes a multi-scale soil moisture algorithm for the upcoming NASA-ISRO SAR (NISAR) mission to estimate high-resolution (200 [m]) soil moisture (the water content of the soil). The algorithm takes advantage of the high-resolution (∼10 [m]) synthetic aperture radar (SAR) backscatter and coarse resolution modeled/reanalysis soil moisture products (∼ 9 [km]) to create a high-resolution (200 [m]) soil moisture product at a global extent. The end goal of the algorithm is to remove dependencies on any complex modeling, tedious retrieval steps, or multiple ancillary data needs, and subsequently decrease the degrees of freedom to achieve optimal accuracy in soil moisture retrievals. The use of modeled/reanalysis soil moisture products with high temporal resolution gives an added advantage in reducing the temporal mismatch between the two different inputs used in the algorithm. In this study, the proposed algorithm is tested using L-band UAVSAR backscatter (σ°) data and Advanced Land Observing Satellite −2 (ALOS-2) SAR σ° as a substitute for the NISAR L-band SAR observations. The algorithm uses the L-band SAR σ° to disaggregate coarse resolution (∼9 [km]) reanalysis soil moisture of the European Centre for Medium-Range Weather Forecast (ECMWF) to a high-resolution of ∼200 [m] soil moisture product. The potential of the algorithm is demonstrated over three sites in different hydroclimatic regions of the world, such as India, the USA, and Canada. The high-resolution soil moisture estimates were compared with the in-situ soil moisture measurements available for three sites (North India, Southern California, and Carman, Manitoba, Canada). In North India, in-situ measurements are from paddy crops with high vegetation water content, the unbiased root-mean-square-error (ubRMSE) for the high-resolution soil moisture retrievals was found to be 0.036 [m3/m3] with a bias of −0.051 [m3/m3]. For the southern California site, the validation statistics shows low ubRMSE of 0.027 [m3/m3] and a low bias of 0.016 [m3/m3]. At the Carman, Manitoba test site of Canada, where in-situ soil measurements were available for multiple crop types, the comparison shows that the ubRMSE for all the crop types lies below 0.05 [m3/m3] with an average bias of <0.07 [m3/m3]. The result confirms that the proposed algorithm meets the NISAR mission's accuracy goals, i.e., 0.06 [m3/m3] ubRMSE over areas with vegetation water content (VWC) below 5 [kg/m2]. Rigorous validation work will still need to be carried out in the future based on the availability of L-band SAR datasets and after the launch of the NISAR satellite.

Additive Manufacturing of Compliant Mechanisms for Deployable Aerospace Structures

In the past 10 years, complex deployable structures have become common on CubeSats and large-scale spacecraft. As new missions are pursued, there is an increased need for more mass and volume efficient deployments. Over the same period, metal additive manufacturing (AM) has enabled new forms of spaceflight hardware. However, AM of compliant mechanisms has not been fully leveraged for deployable aerospace structures. The Surface Water Ocean Topography and NASA-ISRO Synthetic Aperture Radar mission missions launching in 2022 both utilize large deployable masts. Each mast deployment is driven by numerous spring and damper mechanisms. Because of volume constraints, the spring mechanisms designed utilize high aspect ratio rectangular cross section torsion springs that represent the state of the art of manufacturing. This extreme spring design resulted in manufacturing difficulties and hardware failures during ground mechanism testing. Upon re-examining the mechanism design, AM enables torque performance, mass, and complexity improvements. AM allows for torsion spring cross sections not otherwise possible with traditional spring manufacturing methods. Prototype springs of various cross sections were printed in maraging steel and tested. Results confirmed design analysis, and doubling of the spring constant was achieved when compared to the traditional springs. The use of AM also allows springs to be built monolithically with surrounding structure. Design, manufacturing, and test findings will be discussed along with future implications for deployable aerospace structures.

Performance Evaluation of UAVSAR and Simulated NISAR Data for Crop/Noncrop Classification Over Stoneville, MS.

Synthetic Aperture Radar (SAR) data are well‐suited for change detection over agricultural fields, owing to high spatiotemporal resolution and sensitivity to soil and vegetation. The goal of this work is to evaluate the science algorithm for the NASA ISRO SAR (NISAR) Cropland Area product using data collected by NASA's airborne Uninhabited Aerial Vehicle SAR (UAVSAR) platform and the simulated NISAR data derived from it. This study uses mode 129, which is to be used for global‐scale mapping. The mode consists of an upper (129A) and lower band (129B), respectively having bandwidths of 20 and 5 MHz. This work uses 129A data because it has a four times finer range resolution compared to 129B. The NISAR algorithm uses the coefficient of variation (CV) to perform crop/noncrop classification at 100 m. We evaluate classifications using three accuracy metrics (overall accuracy, J‐statistic, Cohen's Kappa) and spatial resolutions (10, 30, and 100 m) for crop/noncrop delineating CV thresholds (CVthr) ranging from 0 to 1 in 0.01 increments. All but the 10 m 129A product exceeded NISAR's mission accuracy requirement of 80%. The UAVSAR 10 m data performed best, achieving maximum overall accuracy, J‐statistic, and Kappa values of 85%, 0.62, and 0.60. The same metrics for the 129A product respectively are: 77%, 0.40, 0.36 at 10 m; 81%, 0.55, 0.49 at 30 m; 80%, 0.58, 0.50 at 100 m. We found that using a literature recommended CVthr value of 0.5 yielded suboptimal accuracy (65%) at this site and that optimal CVthr values monotonically decreased with decreasing spatial resolution.

NASA's high-rate Ka-band downlink system for the NISAR mission

This paper provides a description and analyses of NASA's (National Aeronautics and Space Administration) high-rate Ka-band downlink system for the upcoming NISAR (NASA-ISRO Synthetic Aperture Radar) mission developed at the Jet Propulsion Laboratory (JPL). NISAR is a collaborative Earth-Science mission between NASA and the Indian Space Research Organisation (ISRO), which features an L-band SAR instrument and an S-band SAR instrument. The simultaneous dual-frequency radar system at peak rates will produce data at gigabit-per-second speeds, which drives the data-volume requirements. The key driving requirement for the Payload Communication Subsystem is to provide a minimum of 35 Terabits per day of radar science data to the ground. NASA's high-rate transmitter on the flight system is a software-defined radio based on the Universal Space Transponder platform, providing an offset quadrature phase shift key modulated waveform with Low-Density Parity Check encoding of the data transfer frames. Two transmitters used in a dual-polarization configuration with each transmitter providing two giga-symbols per second (Gsps) of coded data provides an aggregate rate of four Gsps. In this system, using the ISRO-provided 70-cm high-gain antenna, only 1 W of signal power is necessary on each polarization to overcome propagation losses and achieve a successful RF link. Several Near Earth Network (NEN) ground station sites (Alaska in the United States, Svalbard in Norway, and Punta Arenas in Chile) are baselined for the space-to-Earth communications link. Each ground station will also feature multiple upgrades to support NISAR's transmission starting with new Ka-band antennas, and new electronic units such as wideband downconverters and high-rate receivers. In addition, a baseband data processor called Data Acquisition Processor and Handling Network Environment (DAPHNE), newly developed by the NEN, provides data storage and connectivity to backhaul networks. With NISAR's unprecedented large volume of data (nearly 5 Petabytes over the mission duration), a cloud system enables science data processing cost reduction to the mission. The NASA downlink system described herein will be the first operational use of Gsps-class downlink rates on an Earth-Science mission.

Comprehensive Annual Ice Sheet Velocity Mapping Using Landsat-8, Sentinel-1, and RADARSAT-2 Data

Satellite remote sensing data including Landsat-8 (optical), Sentinel-1, and RADARSAT-2 (synthetic aperture radar (SAR) missions) have recently become routinely available for large scale ice velocity mapping of ice sheets in Greenland and Antarctica. These datasets are too large in size to be processed and calibrated manually as done in the past. Here, we describe a methodology to process the SAR and optical data in a synergistic fashion and automatically calibrate, mosaic, and integrate these data sets together into seamless, ice-sheet-wide, products. We employ this approach to produce annual mosaics of ice motion in Antarctica and Greenland with all available data acquired on a particular year. We find that the precision of a Landsat-8 pair is lower than that of its SAR counterpart, but due to the large number of Landsat-8 acquisitions, combined with the high persistency of optical surface features in the Landsat-8 data, we obtain accurate velocity products from Landsat that integrate well with the SAR-derived velocity products. The resulting pool of remote sensing products is a significant advance for observing changes in ice dynamics over the entire ice sheets and their contribution to sea level. In preparation for the next generation sensors, we discuss the implications of the results for the upcoming NASA-ISRO SAR mission (NISAR).

Sensitivity of L-Band SAR Backscatter to Aboveground Biomass of Global Forests

Synthetic Aperture Radar (SAR) backscatter measurements are sensitive to forest aboveground biomass (AGB), and the observations from space can be used for mapping AGB globally. However, the radar sensitivity saturates at higher AGB values depending on the wavelength and geometry of radar measurements, and is influenced by the structure of the forest and environmental conditions. Here, we examine the sensitivity of SAR at the L-band frequency (~25 cm wavelength) to AGB in order to examine the performance of future joint National Aeronautics and Space Administration, Indian Space Research Organisation NASA-ISRO SAR mission in mapping the AGB of global forests. For SAR data, we use the Phased Array L-Band SAR (PALSAR) backscatter from the Advanced Land Observing Satellite (ALOS) aggregated at a 100-m spatial resolution; and for AGB data, we use more than three million AGB values derived from the Geoscience Laser Altimeter System (GLAS) LiDAR height metrics at about 0.16–0.25 ha footprints across eleven different forest types globally. The results from statistical analysis show that, over all eleven forest types, saturation level of L-band radar at HV polarization on average remains ≥100 Mg·ha−1. Fresh water swamp forests have the lowest saturation with AGB at ~80 Mg·ha−1, while needleleaf forests have the highest saturation at ~250 Mg·ha−1. Swamp forests show a strong backscatter from the vegetation-surface specular reflection due to inundation that requires to be treated separately from those on terra firme. Our results demonstrate that L-Band backscatter relations to AGB can be significantly different depending on forest types and environmental effects, requiring multiple algorithms to map AGB from time series of satellite radar observations globally.