A multi-scale algorithm for the NISAR mission high-resolution soil moisture product

Abstract

This study proposes a multi-scale soil moisture algorithm for the upcoming NASA-ISRO SAR (NISAR) mission to estimate high-resolution (200 [m]) soil moisture (the water content of the soil). The algorithm takes advantage of the high-resolution (∼10 [m]) synthetic aperture radar (SAR) backscatter and coarse resolution modeled/reanalysis soil moisture products (∼ 9 [km]) to create a high-resolution (200 [m]) soil moisture product at a global extent. The end goal of the algorithm is to remove dependencies on any complex modeling, tedious retrieval steps, or multiple ancillary data needs, and subsequently decrease the degrees of freedom to achieve optimal accuracy in soil moisture retrievals. The use of modeled/reanalysis soil moisture products with high temporal resolution gives an added advantage in reducing the temporal mismatch between the two different inputs used in the algorithm. In this study, the proposed algorithm is tested using L-band UAVSAR backscatter (σ°) data and Advanced Land Observing Satellite −2 (ALOS-2) SAR σ° as a substitute for the NISAR L-band SAR observations. The algorithm uses the L-band SAR σ° to disaggregate coarse resolution (∼9 [km]) reanalysis soil moisture of the European Centre for Medium-Range Weather Forecast (ECMWF) to a high-resolution of ∼200 [m] soil moisture product. The potential of the algorithm is demonstrated over three sites in different hydroclimatic regions of the world, such as India, the USA, and Canada. The high-resolution soil moisture estimates were compared with the in-situ soil moisture measurements available for three sites (North India, Southern California, and Carman, Manitoba, Canada). In North India, in-situ measurements are from paddy crops with high vegetation water content, the unbiased root-mean-square-error (ubRMSE) for the high-resolution soil moisture retrievals was found to be 0.036 [m3/m3] with a bias of −0.051 [m3/m3]. For the southern California site, the validation statistics shows low ubRMSE of 0.027 [m3/m3] and a low bias of 0.016 [m3/m3]. At the Carman, Manitoba test site of Canada, where in-situ soil measurements were available for multiple crop types, the comparison shows that the ubRMSE for all the crop types lies below 0.05 [m3/m3] with an average bias of <0.07 [m3/m3]. The result confirms that the proposed algorithm meets the NISAR mission's accuracy goals, i.e., 0.06 [m3/m3] ubRMSE over areas with vegetation water content (VWC) below 5 [kg/m2]. Rigorous validation work will still need to be carried out in the future based on the availability of L-band SAR datasets and after the launch of the NISAR satellite.