Narrow Peak Width Research Articles

Synergistic effect induces self crystallization of CsPbBr3 quantum dots in borosilicate glass matrix by LiF

Cesium lead halide perovskite (CsPbX3) quantum dots (QDs) are recognized as viable substitutes for conventional fluorescent powder color converters, which can improve the color gamut and reproducibility of liquid crystal displays (LCDs). Encapsulating QDs in glass can effectively solve the water oxygen stability of QDs, but the glass matrix impedes the nucleation of QDs and the precipitation of QDs requires secondary heating. In our research, we successfully accomplished the self-crystallization of CsPbBr3 QDs facilitated by LiF within a B2O3-SiO2-ZnO borosilicate glass matrix. The results indicate that the self crystallization of CsPbBr3 QDs induced by LiF in borosilicate glass matrix has a synergistic effect. The Li + ions can break the glass network structure and facilitate ionic migration and transport, while F− ions have good electronegativity due to ion aggregation, and can strongly attract Cs+ and Pb2+ ions with larger atomic radii, thereby promoting the rapid nucleation and growth of CsPbBr3 QDs, ultimately synthesizing QDs with uniform particle size, narrow half peak width, good optical properties, and thermal stability.

An improved histogram algorithm for DOA estimation based on single vector acoustic system

The integration of a singular vector acoustic system onto an unmanned underwater platform can lead to achieving unambiguous direction finding across the entire space. To enhance the direction-finding capabilities of the single vector acoustic system for low noise target, a refined histogram algorithm utilizing coherent spectrum weighting is suggested. A comparative evaluation and analysis of the target azimuth estimation performance of the enhanced histogram algorithm, traditional frequency-weighted histogram algorithm, and energy-weighted histogram algorithm are carried out. Through computer simulations, it is observed that the three Direction of Arrival (DOA) algorithms exhibit comparable direction-finding capabilities for wideband signals, whereas for single-frequency signals, the improved histogram algorithm surpasses the two conventional algorithms in direction-finding accuracy. Specifically, at a signal-to-noise ratio (SNR) of −40 dB, the azimuth estimation root mean square error (RMSE) is approximately 2°. Findings from sea trials indicate that the improved histogram algorithm displays a narrower spectral peak width and robust resistance to noise interference, thereby substantiating the effectiveness of the enhanced histogram algorithm.

P-045 Deciphering meiotic chromatin organization by SCP3

Abstract Study question What’s the pattern of genome-wide chromatin occupancy of SCP3 during meiotic prophase, and how its interaction with chromatin is regulated? Summary answer We document SCP3 enriched at active chromatin regions with largely inherited from leptotene to pachytene stage, which facilitated by transcription and condensate assembly in spermatocytes. What is known already Meiosis is a critical step during the process of gametogenesis to form haploid cells which finally develop into functional gametes. The synaptonemal complex (SC) is a meiosis-specific protein assembly which bridges homologous chromosomes to establish the architecture of meiotic chromosome. Genetic ablation of genes encoding SC components impedes meiosis and gametogenesis in mice and mutation of these genes is frequently found in infertile patients. SCP3 localization changes with chromosome morphology in autosomes and is involved in maintaining the association of sex chromosomes. Male mice with null mutation of SCP3 failed to form SCs, resulting in developmental arrest during meiotic prophase. Study design, size, duration This study included male mice at post-natal day 10 (P10), 4 weeks or adult (8 weeks or older) were maintained on C57BL/6J background. Spermatocytes were performed modified CUT&Tag using antibodies. ChIP-seq data was analyzed together with WGBS and ATAC-seq data. Participants/materials, setting, methods Spermatocytes were obtained by a discontinuous BSA density gradient. Cell pellet was resuspended in culture medium (MEM with 10% FBS) at a concentration of 105 cells/ml and cultured at 37 °C in a 5% CO2 incubator. Spermatocytes were cultured with or without 1,6-hexanediol or α-amanitin. Spermatocytes with or without drug treatment were collected at indicated time points for further examination and then modified CUT&Tag and co-IP using anti-SCP3 and anti-POL II antibodies. Main results and the role of chance Chromatin occupancy of SCP3 in leptotene and pachytene spermatocytes, SCP3-Core sites retained upon treatment of 1,6-hexanediol which dissolves SCP3 condensate, and SCP1 occupancy at meiotic chromatin in pachytene spermatocytes. When we determined inter-peak distances and width of peaks, we observe that: (1) SCP3 occupancy in leptotene stage had greater inter-peak distances and narrower peak width than SCP3 occupancy in pachytene stage, demonstrating gradual accumulated SCP3 at chromatin during meiotic progression; (2) SCP3-Core sites have broader peak width than SCP3-NonCore sites, in agreement with stability of SCP3 occupancy at SCP3-Core sites; (3) SCP1 occupancy had greater inter-peak distances and narrower peak width than SCP3 occupancy in pachytene stage, supporting that SCP1 peaks are a subset of SCP3 peaks and SCP1’s major function in connecting LE and CE respectively. Generally, at pachytene-stage meiosis, SCP3 mainly occupies chromatin regions including transcriptionally active sites, Deu and Alu elements, while SCP1 mainly co-localizes with SCP3 at a subset of regions with open chromatin and high cohesin enrichment to connect meiotic chromosome axes with CE. In this way, a local active chromatin environment is created at meiotic chromosome axes, facilitating homologous chromosome recombination. Limitations, reasons for caution Our test was not successful to examine SCP3 occupancy with as few as less than 1000 spermatocytes using our protocol. It is improvement of efficiency of tagmentation or development of more efficient antibodies against SCP3 will be helpful for clinical sample detection. Wider implications of the findings SCP3 occupancy was largely inherited from leptotene to pachytene stage, facilitated by transcription and condensate assembly, and enriched at specific SINE repeats. Further exploration using knockout mouse models of meiotic axial proteins and epigenetic modifiers will provide valuable information on meiotic chromatin architecture and crosstalk among meiotic chromatin events. Trial registration number N/A

Three-dimensional information measurement and reconstruction for micro-hole array based on the modified shape from focus

The geometrical characteristics of the micro-holes and the consistency of spatial distribution among the micro-holes in the micro-hole array fabricated by laser beam drilling (LBD) directly influence the cooling performance, reliability, and longevity of the workpiece. It is of great significance to establish the relationship between the LBD processing parameters and the characteristics of the micro-hole array through the three-dimensional (3D) information measurement and reconstruction of the micro-hole array, as well as to guide and improve the LBD processing technology. However, due to the small size and high aspect ratio of the micro-holes in the micro-hole array, the 3D information measurement and reconstruction of the micro-hole array face challenges. The conventional micro-hole measurement methods suffer from low efficiency, high measurement costs, and potentially destructive measurement processes. Furthermore, the conventional micro-hole measurement methods face challenges in simultaneously obtaining the geometrical characteristics of the micro-holes and the spatial distribution among the micro-holes in the micro-hole array. Therefore, a non-contact and non-destructive 3D information measurement and reconstruction method for the micro-hole array based on the modified shape from focus is proposed. A novel focus measure operator based on grayscale difference and adaptive neighborhood size is proposed to accurately evaluate the focus value and obtain the initial focus volume matrix. A novel image processing operator based on the gradient information of the image sequence is proposed to enhance the initial focus volume matrix. The experimental results indicate that the proposed focus measure operator, combined with the novel image processing operator, is more suitable and reliable for detecting the micro-holes due to its better unimodality, higher contrast, and narrower peak width than the conventional focus measure operator. The optimal focus position of each image point is obtained using the modified Gaussian curve fitting method. On this basis, the 3D information measurement and reconstruction of the micro-hole array are realized. By comparing the results with the conventional micro-hole measurement method, the feasibility and accuracy of the proposed method have been confirmed to be an effective measurement method for the micro-hole array.

Ultra-high order mode-assisted optical differentiator for edge detection with high tunability

An optical spatial differentiator based on the photonic spin Hall effect (PSHE) with high tunability is presented. By utilizing the characteristics of ultra-high order modes in the symmetrical metal cladding waveguide, the Fresnel reflection coefficient spectrum exhibits a narrow peak width and low trough at the resonant incident angles, resulting in high sensitivity to changes in the incident angle-induced spatial shift caused by the PSHE (the highest ∂(|r s /r p |)/∂θ value can reach 107). After polarization transformation and extinction, the output field demonstrates differential operation with respect to the input field. When applied to edge detection, our differentiator can achieve tunable resolution edge images by adjusting the incident angle. Our proposed edge detection scheme has potential applications for cellular and molecular imaging through two-dimensional extension via the target rotation.

Applications of Raman spectroscopy in the diagnosis and monitoring of neurodegenerative diseases.

Raman scattering is an inelastic light scattering that occurs in a manner reflective of the molecular vibrations of molecular structures and chemical conditions in a given sample of interest. Energy changes in the scattered light can be assessed to determine the vibration mode and associated molecular and chemical conditions within the sample, providing a molecular fingerprint suitable for sample identification and characterization. Raman spectroscopy represents a particularly promising approach to the molecular analysis of many diseases owing to clinical advantages including its instantaneous nature and associated high degree of stability, as well as its ability to yield signal outputs corresponding to a single molecule type without any interference from other molecules as a result of its narrow peak width. This technology is thus ideally suited to the simultaneous assessment of multiple analytes. Neurodegenerative diseases represent an increasingly significant threat to global public health owing to progressive population aging, imposing a severe physical and social burden on affected patients who tend to develop cognitive and/or motor deficits beginning between the ages of 50 and 70. Owing to a relatively limited understanding of the etiological basis for these diseases, treatments are lacking for the most common neurodegenerative diseases, which include Alzheimer's disease, Parkinson's disease, Huntington's disease, and amyotrophic lateral sclerosis. The present review was formulated with the goal of briefly explaining the principle of Raman spectroscopy and discussing its potential applications in the diagnosis and evaluation of neurodegenerative diseases, with a particular emphasis on the research prospects of this novel technological platform.

Reactivity-matched synthesis of monodisperse Ag(In,Ga)S2 QDs with efficient luminescence.

I-III-VI quantum dots (QDs) have gained widespread attention owing to their significant advantages of non-toxicity, large structural tolerance, and efficient photoluminescence potential. However, the disbalance of reactivity between the elements will result in undesired products and compromised optical properties. Reducing the activity of highly reactive group IB elements is the most common approach, but it will reduce the overall reactivity and lead to a wide dispersion of QD sizes. In this study, we propose a method to improve the overall reactivity of the reaction system using the highly active IIIA precursor InI3, which triggers rapid nucleation and promotes the formation of Ag(In,Ga)S2 (AIGS) QDs, resulting in monodisperse particle size distributions and a significantly improved photoluminescence quantum yield (PLQY) (from 12% to 72%). Furthermore, narrow band edge emission is realized by coating a gallium sulfide (GaSx) shell on the basis of obtaining high-quality AIGS QDs. The core/shell QDs exhibit a 90% PLQY with a full width at half maximum (FWHM) of only 31 nm at 530 nm. This study provides a viable design strategy to synthesize monodisperse AIGS QDs with a narrow peak width and efficient luminescence, promoting the application of AIGS QDs in the field of luminescent displays.

Enhancing Current Density and Specific Capacitance of Nata de Coco, TEMPO, and MXene Composites through Boiling Time Variations

This research aimed to enhance the current density and specific capacitance of electronic device materials to replace traditional metal materials. Composite materials that include Nata de Coco, TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl), and MXene achieve this improvement. Composite materials that include Nata de Coco, TEMPO, and MXene accomplish this improvement. Initial testing has shown that these materials initially demonstrated lower electrical properties, particularly in current density and specific capacitance, than conventional metals. To enhance their electrical properties, we employed a boiling method with variations in boiling time. The time intervals chosen were 30, 300, and 480 minutes. In the manufacturing process, Nata de Coco, previously oxidized by TEMPO, was boiled in an MXene solution at a temperature of 70°C. We tested the electrical properties of the resulting composite film, focusing on current density and specific capacitance. The measured current density values, corresponding to the different boiling times, were as follows: 0.000239 A/cm² for 30 minutes, 0.000307 A/cm² for 300 minutes, and 0.000320 A/cm² for 480 minutes. The specific capacitance values were 1.7005 F/g for 30 minutes, 1.9707 F/g for 300 minutes, and 2.0364 F/g for 480 minutes. The percentage increase in current density and specific capacitance values from 30 minutes to 300 minutes of boiling was 22% and 13.7%, respectively. For boiling from 300 to 480 minutes, the increase was 4.06% for current density and 3.22% for specific capacitance. These findings suggest that longer boiling times result in improved electrical properties. Subsequently, characteristic tests were performed, including XRD (X-ray diffraction) and SEM (Scanning Electron Microscope) analyses. The XRD results indicated that longer boiling times caused a rightward shift of the diffraction peak with a narrower peak width, signifying increased crystallinity. The highest X-ray intensity was observed in the composite boiled for 480 minutes, with a power of 847.23 counts per second (cps) and a two-theta angle of 21.31°. Additionally, the smallest crystal size was achieved with a 480-minute boiling time, measuring 138.2851 Å. In the SEM analysis, it was evident that longer boiling times led to a higher fraction of MXene within the composite film.

Synthesis of hierarchically porous zirconium-based metal-organic framework@silica core-shell stationary phase through etching strategy for liquid chromatography

Metal organic frameworks (MOFs) show promise to be employed as stationary phase for high performance liquid chromatography (HPLC), however, the microporous structures of MOFs seriously restrict the diffusion and mass transfer of solute molecules, leading to a low column efficiency. In this paper, the fabrication of hierarchically porous UiO-66@SiO2 (HP- UiO-66@SiO2) core-shell microspheres via H2O2 etching has been proposed as a viable approach to enhance the separation performance of MOFs-based columns for HPLC. Through the direct treatment of the preliminary prepared UiO-66@SiO2 microspheres with H2O2 etching, HP-UiO-66@SiO2 core-shell microspheres were successfully synthesized with an enlarged pore size of up to 9 nm, facilitating efficient mass transfer in chromatographic separation. The prepared HP-UiO-66@SiO2 core-shell microspheres were then explored as stationary phase in HPLC to separate the nonpolar alkyl benzene homologues, the polar aromatic alcohol homologues and the xylene isomers. The results indicated that the baseline separations of these solutes were achieved successfully with narrow peak width and higher resolution than the UiO-66@SiO2 column. The HP-UiO-66@SiO2 column exhibited superior separation performance, reaching a maximum plate number of 134,459/m for fluorene, and showing good reproducibility. As a result, this template-free approach suggests that the fabrication of hierarchically porous MOFs@silica core-shell microspheres is a successful approach to enhance the column efficiency of MOFs-based columns in HPLC.

Capillary electrophoresis-mass spectrometry as a tool for Caenorhabditis elegans metabolomics research

IntroductionPolar metabolites in Caenorhabditis elegans (C. elegans) have predominantly been analyzed using hydrophilic interaction liquid chromatography coupled to mass spectrometry (HILIC-MS). Capillary electrophoresis coupled to mass spectrometry (CE-MS) represents another complementary analytical platform suitable for polar and charged analytes.ObjectiveWe compared CE-MS and HILIC-MS for the analysis of a set of 60 reference standards relevant for C. elegans and specifically investigated the strengths of CE separation. Furthermore, we employed CE-MS as a complementary analytical approach to study polar metabolites in C. elegans samples, particularly in the context of longevity, in order to address a different part of its metabolome.MethodWe analyzed 60 reference standards as well as metabolite extracts from C. elegans daf-2 loss-of-function mutants and wild-type (WT) samples using HILIC-MS and CE-MS employing a Q-ToF-MS instrument.ResultsCE separations showed narrower peak widths and a better linearity of the estimated response function across different concentrations which is linked to less saturation of the MS signals. Additionally, CE exhibited a distinct selectivity in the separation of compounds compared to HILIC-MS, providing complementary information for the analysis of the target compounds. Analysis of C. elegans metabolites of daf-2 mutants and WT samples revealed significant alterations in shared metabolites identified through HILIC-MS, as well as the presence of distinct metabolites.ConclusionCE-MS was successfully applied in C. elegans metabolomics, being able to recover known as well as identify novel putative biomarkers of longevity.

A Novel Unambiguous Acquisition Algorithm Based on Segmentation Reconstruction for BOC(n,n) Signal

In order to improve the frequency band utilization and avoid mutual interference between signals, the BD3 satellite signals adopt Binary Offset Carrier (BOC) modulation. On one hand, BOC modulation has a narrow main peak width and strong anti-interference ability; on the other hand, the phenomenon of false acquisition locking caused by the multi-peak characteristic of BOC modulation itself needs to be resolved. In this context, this paper proposes a new BOC(n,n) unambiguous acquisition algorithm based on segmentation reconstruction. The algorithm is based on splitting the local BOC signal into four parts in each subcarrier period. The branch signal and the received signal are correlated with the received signal to generate four branch correlation signals. After a series of combined reconstructions, the final signal detection function completely eliminates secondary peaks. A simulation shows that the algorithm can completely eliminate the sub-peak interference for the BOC signals modulated by subcarriers with different phase. The characteristics of narrow correlation peak are retained. Experiments show that the proposed algorithm has superior performance in detection probability and peak-to-average ratio.

9-Cyano-10-telluriumpyronin Derivatives as Red-light-activatable Raman Probes.

Photoactivatable fluorescence probes can track the dynamics of specific cells or biomolecules with high spatiotemporal resolution, but their broad absorption and emission peaks limit the number of wavelength windows that can be employed simultaneously. In contrast, the narrower peak width of Raman signals offers more scope for simultaneous discrimination of multiple targets, and therefore a palette of photoactivatable Raman probes would enable more comprehensive investigation of biological phenomena. Herein we report 9-cyano-10-telluriumpyronin (9CN-TeP) derivatives as photoactivatable Raman probes whose stimulated Raman scattering (SRS) intensity is enhanced by photooxidation of the tellurium atom. Modification to increase the stability of the oxidation product led to a julolidine-like derivative, 9CN-diMeJTeP, which is photo-oxidized at the tellurium atom by red light irradiation to afford a sufficiently stable oxidation product with strong electronic pre-resonance, resulting in a bathochromic shift of the absorption spectrum and increased SRS intensity.

High-performance, environmentally friendly solid-phase color converted-based quantum dots white light-emitting diodes

Quantum dots (QDs) have been widely used in solid-phase color converter for white light-emitting diodes (WLEDs). However, further applications of these WLEDs are prevented by the limitations of the toxicity of QDs and the poor performance of devices. We herein explore highly luminescent InP/ZnS and AgInS2/ZnS core/shell QDs to solve these issues. We have synthesized high quality InP/ZnS QDs with widely tunable green emission wavelength, high PL QYs (>70%) and narrow PL peak width (∼40 nm). The prepared AgInS2/ZnS QDs achieve a wide emission coverage from 515 to 804 nm, large Stokes shift (>100 nm) and wide PL linewidth (110–160 nm) by adjusting the Ag/In content. Finally, warm-white LEDs were fabricated by combing green-emitting InP/ZnS and AgInS2/ZnS (560–690 nm) QDs with a blue GaN chip. The best WLED exhibits not only bright warm white light (correlated color temperature = 3114 K) with a maximum luminous efficacy of 75.2 lm W−1, but also excellent color quality (color rendering index Ra = 97.52, R9 = 91.5, and R13 = 99.4) and good stability.

Visual working memory recruits two functionally distinct alpha rhythms in posterior cortex.

Oscillatory activity in the human brain is dominated by posterior alpha oscillations (8–14 Hz), which have been shown to be functionally relevant in a wide variety of cognitive tasks. Although posterior alpha oscillations are commonly considered a single oscillator anchored at an individual alpha frequency (∼10 Hz), previous work suggests that individual alpha frequency reflects a spatial mixture of different brain rhythms. In this study, we assess whether independent component analysis (ICA) can disentangle functionally distinct posterior alpha rhythms in the context of visual short-term memory retention. Magnetoencephalography (MEG) was recorded in 33 subjects while performing a visual working memory task. Group analysis at sensor level suggested the existence of a single posterior alpha oscillator that increases in power and decreases in frequency during memory retention. Conversely, single-subject analysis of independent components revealed the existence of two dissociable alpha rhythms: one that increases in power during memory retention (Alpha1) and another one that decreases in power (Alpha2). Alpha1 and Alpha2 rhythms were differentially modulated by the presence of visual distractors (Alpha1 increased in power while Alpha2 decreased) and had an opposite relationship with accuracy (positive for Alpha1 and negative for Alpha2). In addition, Alpha1 rhythms showed a lower peak frequency, a narrower peak width, a greater relative peak amplitude and a more central source than Alpha2 rhythms. Together, our results demonstrate that modulations in posterior alpha oscillations during short-term memory retention reflect the dynamics of at least two distinct brain rhythms with different functions and spatiospectral characteristics.

A nano-liter droplet-based microfluidic reactor serves as continuous large-scale production of inorganic perovskite nanocrystals

Lead halide perovskite nanocrystals (NCs) exhibit high photoluminescence quantum yield (PLQY), high defect tolerance, narrow half peak width, and wide luminous gamut, making them the ideal optoelectronic materials in numerous fields. Nonetheless, their production still suffers from the limited productivity at the bench level. In this work, we fabricated CsPbX3 (X = Cl, Br, I) NCs within droplet-based micro-reactors, where both the nucleation and growth processes could be precisely controlled inside 130-nL microdroplets. This provides a new paradigm for the large-scale synthesis of perovskite NCs with high PLQY. Compared with other synthetic methods, this method can increase the concentration of reactant precursors by 3–116 times, while lowering the ligand to reactant ratio to 2%–50% of the commonly used hot-injection method. By modulating the reaction temperature and residence time, the structure-function relationship between the morphology of NCs and PL properties was extensively investigated. The microfluidic-based process allows the flexible adjustment in the proportion of PbX2 precursors to achieve the fabrication of perovskite NCs whose luminescence range covers the entire visible spectrum (406–677 nm) within one reaction. Finally, perovskite NCs with different halide ions were encapsulated in polymethyl methacrylate to prepare a colored light-emitting diode strip.

Surface Diffusion-Limited Growth of Large and High-Quality Monolayer Transition Metal Dichalcogenides in Confined Space of Microreactor.

Transition metal dichalcogenides (TMDCs), including MoS2 and WS2, are potential candidates for next-generation semiconducting materials owing to their atomically thin structure and strong optoelectrical responses, which allow for flexible optoelectronic applications. Monolayer TMDCs have been grown utilizing chemical vapor deposition (CVD) techniques. Enhancing the domain size with high crystallinity and forming heterostructures are important topics for practical applications. In this study, the size of monolayer WS2 increased via the vapor-liquid-solid growth-based CVD technique utilizing the confined space of the substrate-stacked microreactor. The use of spin-coated metal salts (Na2WO4 and Na2MoO4) and organosulfur vapor allowed us to precisely control the source supply and investigate the growth in a systematic manner. We obtained a relatively low activation energy for growth (1.02 eV), which is consistent with the surface diffusion-limited growth regime observed in the confined space. Through systematic photoluminescence (PL) analysis, we determined that a growth temperature of ∼820 °C is optimal for producing high-quality WS2 with a narrow PL peak width (∼35 meV). By controlling the source balance of W and S, we obtained large-sized fully monolayered WS2 (∼560 μm) and monolayer WS2 with bilayer spots (∼1100 μm). Combining two distinct sources of transition metals, WS2/MoS2 lateral heterostructures were successfully created. In electrical transport measurements, the monolayer WS2 grown under optimal conditions has a high on-current (∼70 μA/μm), on/off ratio (∼5 × 108), and a field-effect mobility of ∼7 cm2/(V s). The field-effect transistor displayed an intrinsic photoresponse with wavelength selectivity that originated from the photoexcited carriers.

Mechanically hot-pressed flattened plastic optical fiber-based SPR sensor and its RI sensing

This paper presents a surface plasmon resonance (SPR) sensor based on a flattened plastic optical fiber (POF) for refractive index (RI) sensing. The flattened POF is fabricated by mechanical hot pressing. Afterwards, a thin film of Ag and Au is first deposited on one side of the flat surface to excite the SPR effect. The results show that the flattened POF-based SPR probe coated with the Au film has a sharper SPR peak and a narrower peak width than the probe coated with Ag film. To improve the SPR effect, two flat surfaces of the flattened POF are coated with metal film (Ag and Au). It was found that the sensor showed better RI sensing performance compared to the sensor with only one flat surface coated with metal film. For the flattened POF with two flat surfaces coated with Ag film, achieving the highest RI sensitivity of 2507 nm/RIU in the RI range of 1.33–1.39. The proposed sensor is a low-cost solution for RI measurement with potential applications in the medical and biochemical fields.

Nitrogen and hydrogen as carrier and make-up gases for GC-MS with Cold EI.

Gas chromatography–mass spectrometry (GC‐MS) with Cold EI is based on interfacing GC and MS with a supersonic molecular beam (SMB) and sample compounds ionization with a fly‐through ion source as vibrationally cold compounds in the SMB (hence the name Cold EI). We explored the use of nitrogen and hydrogen as carrier and make‐up gases with Cold EI and found:Nitrogen is very effective in cooling compounds in SMB and while helium requires 60 ml/min nitrogen provides effective cooling with only 7–8 ml/min combined column and make‐up flow rate. Hydrogen is less effective than helium and requires higher flow rates.The transition from helium to nitrogen (or hydrogen) is simple and fast and requires just closing the helium valve and opening the nitrogen valve.The same column used with helium can be used with nitrogen or hydrogen.The same elution times could be obtained with nitrogen or hydrogen as with helium.The GC separation with nitrogen was reduced compared with helium and peak widths were increased by an average factor of 1.5 for similar elution times. Hydrogen provided ~0.7 narrower peak widths than helium.The signal with nitrogen was reduced compared with helium by an average factor of 3.3 and the signal loss was reduced with higher compounds mass. With hydrogen the signal loss was about a factor of 1.5 but the baseline noise was higher thus with similar S/N as with nitrogen.USEPA 8270 semivolatile mixture was easily analyzed with both nitrogen and hydrogen carrier gases.

Large-Scale Production of Ligand-Engineered Robust Lead Halide Perovskite Nanocrystals by a Droplet-Based Microreactor System.

Cesium lead halide perovskite nanocrystals (CLHP NCs) have a wide range of potential applications benefited from the properties of high photoluminescence quantum yield (PLQY), wide luminous gamut, and narrow half peak width. However, due to the ionic nature and sensitivity to moisture, oxygen, or heat, perovskite nanocrystals are too fragile to maintain their crystal structure and optical properties. This work proposes solutions to two key issues in the development of CLHP NCs. First, a productive droplet-based microreactor system is designed to accomplish the scale-up production of CLHP NCs, obtaining sub-gram high-purity nanocrystal powders in a single production process. Second, CLHP NCs which are stable in polar solvents, air environment, and high temperature by using 3-aminopropyl triethoxysilane (APTES) as basic ligand are obtained. Wrapped with Si-O-Si generated by APTES, the CLHP NCs exhibit a longer fluorescence lifetime and higher quantum yield. Especially, the PLQY of CsPbBr3 @APTES can be stable at higher than 90% for more than 10 days. The Si-O-Si protective layer can also suppress the anion exchange between CsPbBr3 and CsPbI3 , maintaining the monochromaticity of nanocrystal luminescence. Eventually, full-spectrum quantum light-emitting diode (QLED) beads with robust nanocrystals are fabricated. The gamut of CsPbX3 @APTES encompasses 140% of the NTSC color gamutstandard.

Luminescent Lifetime Regulation of Lanthanide-Doped Nanoparticles for Biosensing.

Lanthanide-doped nanoparticles possess numerous advantages including tunable luminescence emission, narrow peak width and excellent optical and thermal stability, especially concerning the long lifetime from microseconds to milliseconds. Differing from other shorter-lifetime fluorescent nanomaterials, the long lifetime of lanthanide-doped nanomaterials is independent with background fluorescence interference and biological tissue depth. This review presents the recent advances in approaches to regulating the lifetime and applications of bioimaging and biodetection. We begin with the introduction of the strategies for regulating the lifetime by modulating the core–shell structure, adjusting the concentration of sensitizer and emitter, changing energy transfer channel, establishing a fluorescence resonance energy transfer pathway and changing temperature. We then summarize the applications of these nanoparticles in biosensing, including ion and molecule detecting, DNA and protease detection, cell labeling, organ imaging and thermal and pH sensing. Finally, the prospects and challenges of the lanthanide lifetime regulation for fundamental research and practical applications are also discussed.