Narrow Emission Linewidth Research Articles

High color rendering index WLEDs enabled by multi-band tuning of InP quantum dots

Quantum dots (QDs) represent a significant class of fluorescent materials, offering the potential to reduce power consumption and enhance the color rendering index (CRI) of white light-emitting diode (WLED) devices. However, the presence of toxic elements such as Cd and Pb in traditional fluorescent QDs limits their widespread commercial application. Compared to the broad emission characteristics of environmentally friendly AgInS2 and CuInS2 QDs, the narrower linewidth of InP-based core-shell QDs is advantageous for developing WLED devices with a higher CRI. In this study, we employed a multistage heating method to synthesize a series of amino-phosphine-based InP/ZnSe core-shell QDs, which exhibited emission wavelengths ranging from 535 to 650 nm, narrow emission linewidths of 43-47 nm, and high photoluminescence quantum yields of 60%-80%. Subsequently, six different color QDs are used to fabricate a WLED device. The best WLEDs show not only bright warm light (correlated color temperature = 3323 K) with a maximum luminous efficacy of 74.1 lm W-1, but also excellent color quality (CRI Ra = 93, as well as R9 = 94.8, and R13 = 97.1). These results indicate remarkable progress in InP-based WLEDs for high-quality lighting applications.

High Efficiency Ultra-Narrow Emission Quantum Dot Light-Emitting Diodes Enabled by Microcavity.

A wide-color-gamut display enableby a narrow emission linewidth facilitates a visually immersive experience akin to the real world. Quantum dot light-emitting diodes (QLEDs) with excellent color purity and high efficiency hold great promise as future candidates for high-definition displays. However, most devices typically exhibit emission linewidths exceeding 20nm, and lack a universal strategy for further enhancing the color purity. In this study, a planar microcavity structure for realizing ultra-narrow emissions is developed by incorporating a distributed Bragg reflector into normal electroluminescent devices. By leveraging the strong optical resonance effect derived from this microcavity structure, red QLEDs are successfully fabricated with an extraordinary full width at half maximum of 11nm in the normal direction, beyond the BT.2020 color coordinates. The fabricated red-microcavity QLEDs exhibit a considerable enhancement in the external quantum efficiency, which increases from 28.2% to 35.6%, together with an extended operating lifetime. The strategy adopted herein will serve as an effective reference for achieving ultra-narrow emission and high-efficiency QLEDs.

Revealing the Role of Organic Ligands in Deep-Blue-Emitting Colloidal Europium Bromide Perovskite Nanocrystals.

Europium halide perovskites are promising candidates for environmentally benign blue-light emitters with their narrow emission line width. However, the development of high-photoluminescence quantum yield (PLQY) colloidal europium halide perovskite nanocrystals (PNCs) is hindered by limited synthetic methods and elusive reaction mechanisms. Here, we provide an effective synthetic route for achieving high-PLQY deep-blue-emitting colloidal CsEuBr3 PNCs. Using two Br-organic ligand precursors, oleylammonium bromide (OLAMHBr) and trioctylphosphine dibromide (TOPBr2), we identified distinct phase evolution routes involving Eu2+:CsBr, Cs4EuBr6, and CsEuBr3. The OLAMHBr precursor initially promotes the formation of the Eu2+:CsBr phase, which reorganizes into the CsEuBr3 perovskite phase via proton transfer. In contrast, the TOPBr2 precursor induces the formation of core/shell Cs4EuBr6/CsBr PNCs, which subsequently transform into CsEuBr3 through nucleophilic addition. The TOPBr2 route exhibited enhanced CsEuBr3 phase homogeneity, resulting in a significantly higher PLQY (40.5%; full width at half-maximum (fwhm) = 24 at 430 nm), compared to the OLAMHBr route (16.5% at 418 nm). Notably, the phase-pure CsEuBr3 PNCs demonstrated a world-record PLQY among the reported blue-emitting lead-free PNCs that exhibit a narrow emission line width (fwhm <25 nm). This work highlights the significant role of organic ligands in the colloidal synthesis of CsEuBr3 PNCs and their potential as nontoxic, solution-processable blue-light emitters.

Crosslinkable Ligands for High-Density Photo-Patterning of Perovskite Nanocrystals.

Perovskite nanocrystals (PNCs) are promising luminescent materials for electronic color displays due to their high luminescence efficiency, widely-tunable emission wavelengths, and narrow emission linewidth. Their application in emerging display technologiesnecessitates precise micron-scale patterningwhile maintaining good optical performance. Although photolithography is a well-established micro-patterning technique in the industry, conventional processes are incompatible with PNCs as the use of polar solvents can damage the ionic PNCs, causingsevere luminescence quenching. Here,we report the rational design and synthesis of a new bidentate photo-crosslinkable ligand for the direct photo-patterning of PNCs. Each ligand contains two photosensitive acrylate groups and two carboxylate groups, and is introduced to the PNCs via an entropy-driven ligand exchange process. In a close-packed thin film, the acrylate ligands photo-polymerize and crosslink under ultraviolet light, rendering the PNCs insoluble in developing solvents. A high-density crosslinked PNC film with an optical density of 1.1 is attained at 1.4µm thickness, surpassing industry requirements on the absorption coefficient. Micron-scale patterning is further demonstrated using direct laser writing, producing well-defined 20µm features. This study thus offers an effective and versatile approach for micro-patterning PNCs, and may also be broadly applicable to other nanomaterial systems.

Evaluation of single silicon vacancy centers in nanodiamonds created by ion implantation at cryogenic temperatures

Abstract Silicon vacancy (SiV) centers in diamonds have attracted much attention because of their stability and narrow emission linewidth, and are promising for applications in quantum information technology. SiV-center-encapsulated nanodiamonds have also attracted much attention because of their potential to be coupled to various photonic devices. One efficient way to fabricate nanodiamonds that contain SiV centers is Si ion implantation into nanodiamonds. However, the evaluation of a single SiV center in a nanodiamond produced by this method at low temperatures has not been performed. In this study, we report on the optical properties of a single SiV center in a nanodiamond produced by ion implantation at cryogenic temperatures. The emission spectrum from a single SiV center ( g 2 ( 0 ) = 0.19 ) was observed with four distinct fine splittings of the zero-phonon line (ZPL) at 4 K. At an excitation power of 50 μ W, the full width at half maximum of the ZPL reached the spectrometer resolution limit (0.09 nm). The temperature dependence of the emission peak is consistent with that of the emission coming from an SiV center under high strain. The results obtained in this work suggest that nanodiamonds containing single SiV centers formed using this method will be an important building block for the realization of quantum information applications.

Ligand Controls Excited Charge Carrier Dynamics in Metal-Rich CdSe Quantum Dots: Computational Insights.

Small metal-rich semiconducting quantum dots (QDs) are promising for solid-state lighting and single-photon emission due to their highly tunable yet narrow emission line widths. Nonetheless, the anionic ligands commonly employed to passivate these QDs exert a substantial influence on the optoelectronic characteristics, primarily owing to strong electron-phonon interactions. In this work, we combine time-domain density functional theory and nonadiabatic molecular dynamics to investigate the excited charge carrier dynamics of Cd28Se17X22 QDs (X = HCOO-, OH-, Cl-, and SH-) at ambient conditions. These chemically distinct but regularly used molecular groups influence the dynamic surface-ligand interfacial interactions in Cd-rich QDs, drastically modifying their vibrational characteristics. The strong electron-phonon coupling leads to substantial transient variations at the band edge states. The strength of these interactions closely depends on the physicochemical characteristics of passivating ligands. Consequently, the ligands largely control the nonradiative recombination rates and emission characteristics in these QDs. Our simulations indicate that Cd28Se17(OH)22 has the fastest nonradiative recombination rate due to the strongest electron-phonon interactions. Conversely, QDs passivated with thiolate or chloride exhibit considerably longer carrier lifetimes and suppressed nonradiative processes. The ligand-controlled electron-phonon interactions further give rise to the broadest and narrowest intrinsic optical line widths for OH and Cl-passivated single QDs, respectively. Obtained computational insights lay the groundwork for designing appropriate passivating ligands on metal-rich QDs, making them suitable for a wide range of applications, from blue LEDs to quantum emitters.

Carbon and Silicon Impurity Defects in GaN: Simulating Single-Photon Emitters by First Principles.

Defect single-photon emitters (SPE) in gallium nitride (GaN) have garnered great attentions in recent years due to the advantages they offer, including the ability to operate at room temperature, narrow emission linewidths, and high brightness. Nevertheless, the precise nature of the single-photon emission mechanism remains uncertain due to the multitude of potential defects that can form in GaN. In this work, our systematical investigation with the ab initio calculation indicates that carbon and silicon, as common dopants in gallium nitride, can interact with intrinsic defects in GaN and form new high-speed defect single-photon sources. Our findings identify a ternary defect NGaVNCN that possesses a short lifetime of less than 1 ns and a small zero-photon line (ZPL) of 864 nm. In other words, this defect can serve as a high-speed single photon source in the short wavelength window for fiber communication. In sharp contrast, the Si-supported defect NGaVNSiN has a higher unoccupied defect energy level which enters the conduction band and is therefore unsuitable for single photon emission. A systematic investigation has been conducted into the potential defects, thermal stability, and single-photon emission properties. The relaxation calculation and self-consistent calculations employed the Perdew-Burke-Ernzerhof exchange-correlation functional and Heyd-Scuseria-Ernzerhof exchange-correlation functional, respectively. These findings indicate the potential for high-performance single-photon sources through carbon or silicon doping of GaN.

Bright and Fast Emission from Robust Supramolecular J-Aggregate Nanostructures through Silica-Encapsulation.

We introduce a two-step silica-encapsulation procedure to optimize both the optical efficiency and structural robustness of 5,5',6,6'-tetrachloro-1,1'-diethyl-3,3'-di(4-sulfobutyl)-benzimidazolocarbocyanine (TDBC), a two-dimensional sheet-like J-aggregate. We report a fluorescence quantum yield of ∼98%, the highest quantum yield recorded for any J-aggregate structure at room temperature, and a fast, emissive lifetime of 234 ps. Silica, as an encapsulating matrix, provides optical transparency, chemical inertness, and robustness to dilution, while rigidifying the J-aggregate structure. Our in situ encapsulation process preserves the excitonic structure in TDBC J-aggregates, maintaining their light absorption and emission properties. The homogeneous silica coating has an average thickness of 0.5-1 nm around J-aggregate sheets. Silica encapsulation permits extensive dilutions of J-aggregates without significant disintegration into monomers. The narrow absorbance and emission line widths exhibit further narrowing upon cooling to 79 K, which is consistent with J-type coupling in the encapsulated aggregates. This silica TDBC J-aggregate construct signifies (1) a bright, fast, and robust fluorophore system, (2) a platform for further manipulation of J-aggregates as building blocks for integration with other optical materials and structures, and (3) a system for fundamental studies of exciton delocalization, transport, and emission dynamics within a rigid matrix.

Highly stable deep-blue emitting CsPbBr3 nanoplatelets with modified zwitterionic surface passivation

Two-dimensional CsPbBr3 nanoplatelets (NPLs) with narrow emission line width are one of the most promising materials for lighting and display applications. Nevertheless, it has been difficult to successfully synthesize deep-blue emitting CsPbBr3 NPLs with long-term stability and high photoluminescence quantum yield (PLQY), which prevents their widespread application in the field of lighting. The use of ligands engineering strategy has demonstrated an increase in the PLQY and stability. Herein, a method employing in situ formation of modified zwitterionic surface ligands is proposed to successfully synthesize high-quality CsPbBr3 NPLs. Zwitterionic passivation strategy can produce deep blue emission of CsPbBr3 NPLs at ∼ 461 nm, achieving a near-unity quantum yield and excellent stability for long-term storage at room-temperature, heat treatment, and ultraviolet irradiation. This enhancement can be attributed to the strong chelation between the modified zwitterions and the surface of CsPbBr3 NPLs, which can effectively immobilize surface halide ions and passivate surface defects. This work provides a flexible way to achieve high PLQY and improve the stability issues in perovskite NPLs.

Efficient, Color-Stable, Pure-Blue Light-Emitting Diodes Based on Aromatic Ligand-Engineered Perovskite Nanoplatelets.

Perovskite nanoplatelets (NPLs) show great potential for high-color-purity light-emitting diodes (LEDs) due to their narrow line width and high exciton binding energy. However, the performance of perovskite NPL LEDs lags far behind perovskite quantum dot-/film-based LEDs, owing to their material instability and poor carrier transport. Here, we achieved efficient and stable pure blue-emitting CsPbBr3 NPLs with outstanding optical and electrical properties by using an aromatic ligand, 4-bromothiophene-2-carboxaldehyde (BTC). The BTC ligands with thiophene groups can guide two-dimensional growth and inhibit out-of-plane ripening of CsPbBr3 NPLs, which, meanwhile, increases their structural stability via strongly interacting with PbBr64- octahedra. Moreover, aromatic structures with delocalized π-bonds facilitate charge transport, diminish band tail states, and suppress Auger processes in CsPbBr3 NPLs. Consequently, the LEDs demonstrate efficient and color-stable blue emissions at 465 nm with a narrow emission line width of 17 nm and a maximum external quantum efficiency (EQE) of 5.4%, representing the state-of-the-art CsPbBr3 NPL LEDs.

Electrohydrodynamic Inkjet Printing of Three-Dimensional Perovskite Nanocrystal Arrays for Full-Color Micro-LED Displays.

Perovskite nanocrystal (PeNC) arrays are showing a promising future in the next generation of micro-light-emitting-diode (micro-LED) displays due to the narrow emission linewidth and adjustable peak wavelength. Electrohydrodynamic (EHD) inkjet printing, with merits of high resolution, uniformity, versatility, and cost-effectiveness, is among the competent candidates for constructing PeNC arrays. However, the fabrication of red light-emitting CsPbBrxI(3-x) nanocrystal arrays for micro-LED displays still faces challenges, such as low brightness and poor stability. This work proposes a design for a red PeNC colloidal ink that is specialized for the EHD inkjet printing of three-dimensional PeNC arrays with enhanced luminescence and stability as well as being adaptable to both rigid and flexible substrates. Made of a mixture of PeNCs, polymer polystyrene (PS), and a nonpolar xylene solvent, the PeNC colloidal ink enables precise control of array sizes and shapes, which facilitates on-demand micropillar construction. Additionally, the inclusion of PS significantly increases the brightness and environmental stability. By adopting this ink, the EHD printer successfully fabricated full-color 3D PeNC arrays with a spatial resolution over 2500 ppi. It shows the potential of the EHD inkjet printing strategy for high-resolution and robust PeNC color conversion layers for micro-LED displays.

B‒N covalent bond-involved π-extension of multiple resonance emitters enables high-performance narrowband electroluminescence.

Multi-boron-embedded multiple resonance thermally activated delayed fluorescence (MR-TADF) emitters show promise for achieving both high color-purity emission and high exciton utilization efficiency. However, their development is often impeded by a limited synthetic scope and excessive molecular weights, which challenge material acquisition and organic light-emitting diode (OLED) fabrication by vacuum deposition. Herein, we put forward a B‒N covalent bond-involved π-extension strategy via post-functionalization of MR frameworks, leading to the generation of high-order B/N-based motifs. The structurally and electronically extended π-system not only enhances molecular rigidity to narrow emission linewidth but also promotes reverse intersystem crossing to mitigate efficiency roll-off. As illustrated examples, ultra-narrowband sky-blue emitters (full-width at half-maximum as small as 8nm in n-hexane) have been developed with multi-dimensional improvement in photophysical properties compared to their precursor emitters, which enables narrowband OLEDs with external quantum efficiencies (EQEmax) of up to 42.6%, in company with alleviated efficiency decline at high brightness, representing the best efficiency reported for single-host OLEDs. The success of these emitters highlights the effectiveness of our molecular design strategy for advanced MR-TADF emitters and confirms their extensive potential in high-performance optoelectronic devices.

Direct in situ photolithography of ultra-stable CsPbBr3 quantum dot arrays based on crosslinking polymerization.

CsPbX3 (X = Br, Cl, I) perovskite quantum dots (PQDs) are the rising star for various display applications owing to their excellent opto-electrical properties, such as an adjustable spectrum, narrow emission linewidth and high quantum yield. However, these PQDs are well known to suffer from intrinsic instability under atmospheric conditions. In this work, a novel photosensitive ligand, phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide (XBPO), was employed as a dual-functional reagent for PQD surface engineering. The XBPO ligand could cleave to produce phenylphosphinyl radicals and trimethylbenzoyl radicals under UV light irradiation. The phenylphosphinyl radicals with PO bonds could effectively passivate the PQD surface defects, leading to quantum yield improvement. The CsPbBr3 and CsPbI3 PQDs with XBPO modification could achieve a photoluminescence quantum yield (PLQY) of near unity and 92%, respectively. Additionally, the in situ encapsulation of the PQDs was achieved by the subsequent crosslinking polymerization, which significantly improved the stability of the PQDs against solvents and the environment. By combining a standard photolithography procedure, we demonstrated a micro-pattern of CsPbBr3 PQDs. These results establish a universal route for PQD patterning, compatible with the existing photolithography processes, which could facilitate the application of PQDs in next-generation display technology.

Snapshot hyperspectral imaging of intracellular lasers.

Intracellular lasers are emerging as powerful biosensors for multiplexed tracking and precision sensing of cells and their microenvironment. This sensing capacity is enabled by quantifying their narrow-linewidth emission spectra, which is presently challenging to do at high speeds. In this work, we demonstrate rapid snapshot hyperspectral imaging of intracellular lasers. Using integral field mapping with a microlens array and a diffraction grating, we obtain images of the spatial and spectral intensity distribution from a single camera acquisition. We demonstrate widefield hyperspectral imaging over a 3 × 3 mm2 field of view and volumetric imaging over 250 × 250 × 800 µm3 (XYZ) volumes with a lateral (XY) resolution of 5 µm, axial (Z) resolution of 10 µm, and a spectral resolution of less than 0.8 nm. We evaluate the performance and outline the challenges and strengths of snapshot methods in the context of characterizing the emission from intracellular lasers. This method offers new opportunities for a diverse range of applications, including high-throughput and long-term biosensing with intracellular lasers.

Highly Efficient Blue Light‐Emitting Diodes Based on Perovskite Film with Vertically Graded Bandgap and Organic Grain Boundary Passivation Shells

AbstractMetal halide perovskite materials have emerged as a promising class of semiconductors for high‐performance optoelectronic applications, particularly for light‐emitting diodes (LEDs), due to their high quantum efficiency, facile color tunability, narrow emission line widths, as well as cost‐effectiveness. Despite the great successes on green and red perovskite LEDs (PeLEDs), the external quantum efficiency (EQE) of blue PeLEDs still lags far behind that of green and red counterparts. Here, wavelength tunable pure and deep blue PeLEDs with high EQE are presented, achieving 17.5% and 10.8% for emission wavelengths of 472 and 461 nm, respectively. The wavelength tenability and high EQE are attributed to the unique vertically graded bandgaps and grain boundary organic shells in the perovskite films. The results demonstrate a significant performance improvement in blue PeLEDs, provide a novel route to fabricate high‐performance pure and deep blue PeLEDs that can match the performance of the green and red PeLEDs for future lighting and display applications.

Reducing Emission Linewidth of Pure-Blue ZnSeTe Quantum Dots through Shell Engineering toward High Color Purity Light-Emitting Diodes.

High color purity blue quantum dot light-emitting diodes (QLEDs) have great potential applications in the field of ultra-high-definition display. However, the realization of eco-friendly pure-blue QLEDs with a narrow emission linewidth for high color purity remains a significant challenge. Herein, a strategy for fabricating high color purity and efficient pure-blue QLEDs based on ZnSeTe/ZnSe/ZnS quantum dots (QDs) is presented. It is found that by finely controlling the internal ZnSe shell thickness of the QDs, the emission linewidth can be narrowed by reducing the exciton-longitudinal optical phonon coupling and trap states in the QDs. Additionally, the regulation of the QD shell thickness can suppress the Förster energy transfer between QDs in the QLED emission layer, which will help to reduce the emission linewidth of the device. As a result, the fabricated pure-blue (452 nm) ZnSeTe QLED with ultra-narrow electroluminescence linewidth (22 nm) exhibit high color purity with the Commission Internationale de l'Eclairage chromatic coordinates of (0.148, 0.042) and considerable external quantum efficiency (18%). This work provides a demonstration of the preparation of pure-blue eco-friendly QLEDs with both high color purity and efficiency, and it is believed that it will accelerate the application process of eco-friendly QLEDs in ultra-high-definition displays.

Color Revolution: Prospects and Challenges of Quantum-Dot Light-Emitting Diode Display Technologies.

Light-emitting diodes (LEDs) based on colloidal quantum-dots (QDs) such as CdSe, InP, and ZnSeTe feature a unique advantage of narrow emission linewidth of ≈20 nm, which can produce highly accurate colors, making them a highly promising technology for the realization of displays with Rec. 2020 color gamut. With the rapid development in the past decades, the performances of red and green QLEDs have been remarkably improved, and their efficiency and lifetime can almost meet industrial requirements. However, the industrialization of QLED displays still faces many challenges; for example, (1) the device mechanisms including the charge injection/transport/leakage, exciton quenching, and device degradation are still unclear, which fundamentally limit QLED performance improvement; (2) the blue performances including the efficiency, chromaticity, and stability are relatively low, which are still far from the requirements of practical applications; (3) the color patterning processes including the ink-jet printing, transfer printing, and photolithography are still immature, which restrict the manufacturing of high resolution full-color QLED displays. Here, the recent advancements attempting to address the above challenges of QLED displays are specifically reviewed. After a brief overview of QLED development history, device structure/principle, and performances, the main focus is to investigate the recent discoveries on device mechanisms with an emphasis on device degradation. Then recent progress is introduced in blue QLEDs and color patterning. Finally, the opportunities, challenges, solutions, and future research directions of QLED displays are summarized.

Coherent heteroepitaxial growth of I-III-VI2 Ag(In,Ga)S2 colloidal nanocrystals with near-unity quantum yield for use in luminescent solar concentrators

Colloidal Ag(In,Ga)S2 nanocrystals (AIGS NCs) with the band gap tunability by their size and composition within visible range have garnered surging interest. High absorption cross-section and narrow emission linewidth of AIGS NCs make them ideally suited to address the challenges of Cd-free NCs in wide-ranging photonic applications. However, AIGS NCs have shown relatively underwhelming photoluminescence quantum yield (PL QY) to date, primarily because coherent heteroepitaxy has not been realized. Here, we report the heteroepitaxy for AIGS-AgGaS2 (AIGS-AGS) core-shell NCs bearing near-unity PL QYs in almost full visible range (460 to 620 nm) and enhanced photochemical stability. Key to the successful growth of AIGS-AGS NCs is the use of the Ag-S-Ga(OA)2 complex, which complements the reactivities among cations for both homogeneous AIGS cores in various compositions and uniform AGS shell growth. The heteroepitaxy between AIGS and AGS results in the Type I heterojunction that effectively confines charge carriers within the emissive core without optically active interfacial defects. AIGS-AGS NCs show higher extinction coefficient and narrower spectral linewidth compared to state-of-the-art heavy metal-free NCs, prompting their immediate use in practicable applications including displays and luminescent solar concentrators (LSCs).

Design Rules for Obtaining Narrow Luminescence from Semiconductors Made in Solution.

Solution-processed semiconductors are in demand for present and next-generation optoelectronic technologies ranging from displays to quantum light sources because of their scalability and ease of integration into devices with diverse form factors. One of the central requirements for semiconductors used in these applications is a narrow photoluminescence (PL) line width. Narrow emission line widths are needed to ensure both color and single-photon purity, raising the question of what design rules are needed to obtain narrow emission from semiconductors made in solution. In this review, we first examine the requirements for colloidal emitters for a variety of applications including light-emitting diodes, photodetectors, lasers, and quantum information science. Next, we will delve into the sources of spectral broadening, including "homogeneous" broadening from dynamical broadening mechanisms in single-particle spectra, heterogeneous broadening from static structural differences in ensemble spectra, and spectral diffusion. Then, we compare the current state of the art in terms of emission line width for a variety of colloidal materials including II-VI quantum dots (QDs) and nanoplatelets, III-V QDs, alloyed QDs, metal-halide perovskites including nanocrystals and 2D structures, doped nanocrystals, and, finally, as a point of comparison, organic molecules. We end with some conclusions and connections, including an outline of promising paths forward.

Fused Triangulene Dimers: Facile Synthesis by Intramolecular Radical‐Radical Coupling and Application for Near‐Infrared Lasers

AbstractLarge graphene‐like molecules with four zigzag edges are ideal gain medium materials for organic near‐infrared (NIR) lasers. However, synthesizing them becomes increasingly challenging as the molecular size increases. In this study, we introduce a new intramolecular radical‐radical coupling approach and successfully synthesize two fused triangulene dimers (1 a/1 b) efficiently. X‐ray crystallographic analysis of 1 a indicates that there is no intermolecular π‐π stacking in the solid state. When the more soluble derivative 1 b is dispersed in polystyrene thin films, amplified spontaneous emission in the NIR region is observed. Using 1 b as the active gain material, we fabricate solution‐processed distributed feedback lasers that exhibit a narrow emission linewidth at around 790 nm. The laser devices also exhibit low thresholds with high photostability. Our study provides a new synthetic strategy for extended nanographenes, which have diverse applications in electronics and photonics.