Narrow Molecular Weight Distribution Research Articles

RAFT Polymerization of a Renewable Ricinoleic Acid‐Derived Monomer and Subsequent Post‐Polymerization Modification via the Biginelli‐3‐Component Reaction

AbstractThe search for renewable monomers for radical polymerization techniques is of current interest due to the awareness of sustainability requirements in the chemical sciences. Herein, the synthesis and reversible addition‐fragmentation chain‐transfer (RAFT) polymerization of a renewable methacrylate monomer based on ricinoleic acid as sustainable starting material is presented. In addition, the hydroxy moiety of the ricinoleic acid is converted to an acetoacetate in order to allow for a post‐polymerization modification (PPM) using the Biginelli‐three‐component reaction (B‐3CR), rendering the presented monomer a renewable and highly flexible reactant for the synthesis of polymer materials. Consequently, RAFT polymerization yields macromolecules with a molecular weight of up to 15 000 g mol−1 and expectedly narrow molecular weight distributions with Ðs around 1.13. The feasibility of chain extension and block copolymer synthesis is demonstrated. Eventually, the PPM of the acetoacetate moiety of the polymer repeating units using the B‐3CR is proven to be efficient with conversions of up to 95% of the acetoacetates, while the modification allows for a pronounced increase of the glass transition temperature to approximately room temperature compared to the unmodified polymers (Tg = −50 °C).

Characterization of alkali-lignin-grafted polyacrylamide synthesized by atom transfer radical polymerization

The preparation of value-added, chemically modified lignin-based copolymers for the use of technical lignin is crucial for green and sustainable development. Herein, we synthesized alkali-lignin-grafted polyacrylamide by atom transfer radical polymerization (ATRP). As alkali lignin (AL) has the highest total hydroxyl group content, it was modified with 2-bromoisobutyryl bromide to synthesize a lignin macroinitiator (lignin-Br) at different ratios of [OH group in AL]:[TEA]:[BiBB] = 1:1:1, 1:1.5:1.5, and 1:2:2. Acrylamide was grafted from lignin-Br with the most Br-initiating sites via ATRP. The ratios of monomer to lignin-Br used were 50:1, 100:1, and 200:1, and the synthesized copolymers (L-g-PAM) were denoted as L-g-PAM50, L-g-PAM100, and L-g-PAM200, respectively. These copolymers were characterized by Fourier transform infrared (FT-IR) and 1H nuclear magnetic resonance (NMR) spectroscopies. The FT-IR and 1H NMR results indicated that polyacrylamide was introduced into the lignin backbone of all L-g-PAM copolymers. Gel permeation chromatography of L-g-PAM showed that the M w of L-g-PAM200 was the highest at 427,383 g/mol. Photographs and scanning electron microscopy images of L-g-PAM showed that L-g-PAM appeared as a soft sponge and contained interwoven fibers. The maximum degradation temperature (T max) of L-g-PAM increased with increasing monomer-to-lignin-Br ratio. Moreover, the glass transition temperature (T g) of L-g-PAM was higher than that of AL. The alkali-lignin-grafted polyacrylamide, synthesized by ATRP, in our study has a narrow molecular weight distribution, and its soft sponge properties make it a hydrogel or another surfactant.

Vanadium-Catalyzed Terpolymerization of α,ω-Dienes with Ethylene and Cyclic Olefins: Ready Access to Polar-Functionalized Polyolefins

α,ω-Dienes are an important class of monomers due to their utility in the synthesis of cyclopolyolefins and reactive polyolefin intermediates. In this contribution, the terpolymerization of two α,ω-dienes (i.e., 1,5-hexadiene and 1,7-octadiene) with ethylene and various cyclic olefins [i.e., norbornene (NB), 5-ethylidene-2-norbornene (ENB), and dicyclopentadiene (DCPD)] catalyzed by a chelated imido vanadium complex has been examined. The ENB and DCPD diene termonomers provide additional sites for post-polymerization functionalization. Vanadium-catalyzed terpolymerization of the investigated α,ω-dienes yields polyolefins with a high molecular weight (Mw up to 200 × 103 g mol–1), unimodal and narrow molecular weight distribution, subambient glass transition temperatures (−30 < Tg °C < −3), and a proper content of C═C bonds. Comprehensive NMR investigation of the obtained polymers revealed that subtle changes in the α,ω-diene size have important effects on the numerous combinations of insertion paths (ring closure vs ring opening), from which different repeating units with a C═C bond in the side or main polymer chain and cyclic units are installed. Finally, the poly(ethylene-ter-1,5-hexadiene-ter-NB) was subjected to thiol-ene addition using thioglycolic acid, methyl thioglycolate, and N-acetyl-l-cysteine to access polar-functionalized polyolefins with a degree of functionalization and properties dependent on the thiol substitution.

Narrowly-Distributed Conjugated Polymers Synthesized through Suzuki Polymerization with Palladium(II) N-Heterocyclic Carbene Complex Confined in Dendritic Mesoporous Silica Nanoparticles.

A catalytic heterogenous Suzuki polymerization method was developed by confining the Pd(II)-catalyzed cross coupling reactions to take place exclusively in the nanochannels of dendritic mesoporous silica nanoparticles. Conjugated polymers with various monomer combinations, including donor-acceptor structures, were obtained in high yields. The molecular weights of the obtained polymers were well controlled with narrow molecular weight distributions (PDI value down to 1.13). All the polymeric products were highly soluble in common organic solvents, granting them with high processability. All the features of this confined Suzuki polymerization method endow the conjugated polymers great potential in optoelectronic applications.

Diblock dialternating terpolymers by one-step/one-pot highly selective organocatalytic multimonomer polymerization

The synthesis of well-defined block copolymers from a mixture of monomers without additional actions (“one-pot/one-step”) is an ideal and industrially valuable method. In addition, the presence of controlled alternating sequences in one or both blocks increases the structural diversity of polymeric materials, but, at the same time, the synthetic difficulty. Here we show that the “one-pot/one-step” ring-opening terpolymerization of a mixture of three monomers (N-sulfonyl aziridines; cyclic anhydrides and epoxides), with tert-butylimino-tris(dimethylamino)phosphorene (t-BuP1) as a catalyst, results in perfect diblock dialternating terpolymers having a sharp junction between the two blocks, with highly-controllable molecular weights and narrow molecular weight distributions (Ð < 1.08). The organocatalyst switches between two distinct polymerization cycles without any external stimulus, showing high monomer selectivity and kinetic control. The proposed mechanism is based on NMR, in-situ FTIR, SEC, MALDI-ToF, reactivity ratios, and kinetics studies.

Living Aqueous Microemulsion Polymerization of Ethylene with Robust Ni(II) Phosphinophenolato Catalysts.

Due to chain transfer events being competitive with chain growth, ethylene polymerization by P,O-chelated Ni(II) complexes usually affords low molecular weight polymers or oligomers. We now show that appropriately bulky substituted phosphinophenolato Ni(II) can polymerize in a living fashion, virtually devoid of chain transfer. Aqueous polymerizations with microemulsions of [κ2-P,O-2-(2-(2',6'-(MeO)2C6H3)C6H4)(Ph)P-6-(3',5'-(CF3)2C6H3)C6H3O-NiMe(pyridine)] (3) at 30 °C yield polyethylenes with narrow molecular weight distributions (Mw/Mn 1.02 to 1.34) and ultrahigh molecular weights (up to 2 × 106) in the form of aqueous nanoparticle dispersions. Catalyst stability and activity are maintained up to 70 °C in water.

RAFT Polymerization of 2‐(tert‐Butoxycarbonyloxy)Ethyl Methacrylate and Transformation to Functional Polymers via Deprotection and the Subsequent Polymer Reactions

AbstractReversible addition–fragmentation chain transfer (RAFT) polymerization of 2‐(tert‐butoxycarbonyloxy)ethyl methacrylate (BHEMA) is carried out using 4‐cyano‐4‐((dodecylsulfanylthiocarbonyl)sulfanyl)pentanoic acid as the RAFT agent. The polymers with a controlled molecular weight and polydispersity are produced when a large amount of the RAFT agent is used. The RAFT polymerization of isobutyl methacrylate is also carried out using poly(2‐(tert‐butoxycarbonyloxy)ethyl methacrylate) (PBHEMA) as the macro‐RAFT agent in order to synthesize diblock copolymers with a narrow molecular weight distribution. It is revealed that the control of the polymerization of BHEMA is achieved under limited polymerization conditions. Then, the acid‐catalyzed deprotection of tert‐butoxycarbonyloxy groups of PBHEMA is performed in the presence of trifluoroacetic acid at room temperature to obtain polymers with a hydroxy group in the side chain. The hydroxy‐containing polymers are further reacted with 2‐isocyanatoethyl acrylate and methacrylate to synthesize precursor polymers used for a thermally curing system.

Electronic and Magnetic Properties of a Three-Arm Nonconjugated Open-Shell Macromolecule.

Nonconjugated radical polymers (i.e., macromolecules with aliphatic backbones that have stable open-shell sites along their pendant groups) have arisen as an intriguing complement to π-conjugated polymers in organic electronic devices and may prove to have superior properties in magneto-responsive applications. To date, however, the design of nonconjugated radical polymers has primarily focused on linear homopolymer, copolymer, and block polymer motifs even though conjugated dendritic macromolecules (i.e., polyradicals) have shown significant promise in terms of their response under applied magnetic fields. Here, we address this gap in creating a nonconjugated, three-arm radical macromolecule with nitroxide open-shell sites using a straightforward, single-step reaction, and we evaluated the electronic and magnetic properties of this material using a combined computational and experimental approach. The synthetic approach employed resulted in a high-purity macromolecule with a well-defined molecular weight and narrow molecular weight distribution. Moreover, epoxide-based units were implemented in the three-arm radical macromolecule design, and this resulted in a nonlinear radical macromolecule with a low (i.e., below room temperature) glass transition temperature and one that was an amorphous material in the solid state. These properties allowed thin films of the three-arm radical macromolecule to have electrical conductivity values on par with many linear radical polymers previously reported, and our computational efforts suggest the potential of higher generation open-shell dendrimers to achieve advanced electronic and magnetic properties. Importantly, the three-arm radical macromolecule also demonstrated antiferromagnetic exchange coupling between spins at temperatures < 10 K. In this way, this effort puts forward key structure-property relationships in nonlinear radical macromolecules and presents a clear path for the creation of next-generation macromolecules of this type.

Fine-tune of lignin properties by its fractionation with a sequential organic solvent extraction

In this work, different lignins were obtained from two different extraction methods (kraft and organosolv) but from the same raw material (Eucalyptus globulus sp.). They were subsequently fractionated to determine the differences of each extraction method and their corresponding physicochemical properties found in fractionation sequence and obtained fractions. The goal of the fractionation was to obtain lignin fractions with narrower molecular weight distribution and lower polydispersity index (PI). The solvent sequence was designed based on the environmental friendly properties, health and safety assessments of the selected organic solvents: (methanol (MeOH), ethanol (EtOH), propan-2-one (DMK), ethyl acetate (EtOAc), propan-1-ol (nPrOH), propan-2-ol (iPrOH), butan-2-one (MEK), and butan-1-ol (tBuOH)). The different fractions obtained were characterised to determine their chemical structure by several analytical techniques, such as Fourier Transformed Infrared Spectroscopy (FTIR), Ultraviolet (UV), Phosphorus-31 Nuclear Magnetic Resonance (31P NMR), Pyrolysis–Gas Chromatography/Mass Spectrometry (Py-GC/MS), Thermogravimetric analysis (TGA), and Differential scanning calorimetry (DSC). In addition, Gel Permeation Chromatography (GPC) was used to obtain the molecular weight distribution. This study showed an effective method for obtaining homogeneous lignins with specific structures and properties depending on the solvent and molecular weight attained. Moreover, the method designed was found to be effective regardless of the lignin extraction process employed; besides, various lignin fractions were obtained which were different from each other, having specific target applications depending on their structure and chemical properties, ranging from small molecules with abundant reactive sites to act as active materials or copolymer reagents for many applications, to larger and more inactive molecules with higher thermal resistivity.

Syntheses of benzhydryl 2-propanoyl-functionalized trithiocarbonates and its use as chain transfer agents in the RAFT polymerization of styrene

Abstract The preparation of three new benzhydryl 2-propanoyl-functionalized trithiocarbonate RAFT agents, benzhydryl 2-(ethylsulfanylthiocarbonylsulfanyl)propanoate, benzhydryl 2-(butylsulfanylthiocarbonylsulfanyl)propanoate, benzhydryl 2-(dodecylsulfanylthiocarbonylsulfanyl)propanoate is described. The RAFT polymerization of styrene, mediated by the appropriate benzhydryl 2-(alkylsulfanylthiocarbonylsulfanyl)propanoate as the chain transfer agent, with AIBN as initiator at 70 0C, proceeds via reversible-deactivation radical polymerization processes to produce the corresponding α-benzhydryl 2-propanoyl polystyrene derivative, with the benzhydryl ester group introduced at the α-terminus of the polymer chain. Polymerization kinetics measurements show that each RAFT polymerization reaction follows first order rate kinetics with respect to percentage monomer consumption and the number average molecular weights of the functionalized polymers increase linearly with the percentage monomer conversion to produce functionalized polymers with narrow molecular weight distributions. The percentage monomer conversion with time for each polymerization reaction was monitored by 1H NMR spectroscopy by evaluating the consumption of styrene with respect to polymerization time. Post-RAFT polymerization chain end modification of α-benzhydryl 2-propanoyl-functionalized polystyrene by the acid catalyzed ester hydrolysis reactions with concentrated sulfuric acid afforded the corresponding α-carboxyl functionalized polystyrene derivative, with the retention of the thiocarbonylthio moiety at the ω-terminus of the polymer chain. The benzhydryl 2-propanoyl-functionalized trithiocarbonate chain transfer agents and the different functionalized polystyrene derivatives were characterized by 1H NMR, 13C NMR and FTIR spectroscopy, size exclusion chromatography, thin layer chromatography and mass spectrometry measurements.

Synthesis of mono- and bis- benzimidazolin-2-iminato titanium complexes and their catalytic performances in ethylene homo- and co- polymerizations

A series of mono- and bis- benzimidazolin-2-iminato titanium complexes (Ti1–Ti6) were synthesized herein. All the complexes were isolated in high yields and confirmed by 1H and 13C NMR spectra. Molecular structures of complexes Ti1, Ti3, and Ti4 were further determined by single-crystal X-ray diffraction, which gave comprehensive bond properties as well as structural differences with the previously reported imidazolin-2-iminato titanium analogs. Being activated by methylaluminoxane (MAO), all the complexes showed moderate activities for ethylene homopolymerization and copolymerization with α-olefins. In all the cases, the resultant polymers had narrow molecular weight distributions. The catalysts still possessed acceptable polymerization activities even at a temperature of 90 °C, implying the uniqueness of the benzimidazolin-2-iminato ligand.

Study on the preparation and performance comparison of side-chain hydroxyl-terminated polybutadiene derivatives with narrowly molecular weight distribution used for polyurethane

Hydroxy-terminated oligomers with narrow molecular weight distribution using as soft segment of polyurethane can significantly increase the modulus, tensile strength, and elongation at break of the polyurethane. Thus, design and synthesis of new hydroxy-terminated oligomers having narrow molecular weight distribution can improve the properties of polyurethane and further expand the use range of polyurethane. A set of side-chain hydroxyl-terminated polybutadiene (HTPB) derivatives were successfully synthesized by anionic polymerization and blue light photocatalytic thiol-ene reaction. Firstly, HTPB with narrow molecular weight distribution was synthesized via anionic polymerization using mono-lithium based initiator and followed by de-protection. Then, HTPB derivatives with different side-chains such as butyl, ethyl acetate, or myristyl, namely HTPBbut, HTPB eac and HTPBtet, were obtained by blue light photocatalytic thiol-ene reaction using Ru(bpy)3Cl2 as photoredox catalyst and HTPB as matrix polymer. Similar with HTPB, those HTPB derivatives also have narrow molecular weight distribution. Polyurethane elastomers (PUs) were synthesized with HTPB or HTPB derivatives as soft segment, toluene diisocynate (TDI) as hard segment, and 1, 4-butanediol as chain extender. Compared study the performances of polymers, the results showed that glass transition temperature (Tg) and viscosity of HTPB derivatives were increased when short-chain side groups were introduced. But instead, Tg and viscosity of HTPB derivatives was reduced following long-chain side groups being grafted. Through comparing research of properties for PUs, tensile strength is reduced and elongation at break is augmented, when side groups were introduced in HTPB backbone. Research on the contact angle tests of PUs indicated that the contact angle of PUs using HTPB, HTPBbut or HTPBeac as soft segment, is similar, and PUs using HTPBtet as soft segment has a larger contact angle about 137.2 °C.

Efficient Visible-Light-Driven RAFT Polymerization Mediated by Deep Eutectic Solvents under an Open-to-Air Environment

In this work, we investigate the effects of deep eutectic solvents (DESs) on a facile reversible addition–fragmentation chain-transfer (RAFT) polymerization driven by visible light. A DES composed of tetrabutylammonium chloride (TBACl) and ethylene glycol served as a nonvolatile medium for a variety of monomers, including methyl methacrylate, methyl acrylate, dimethylacrylamide, and styrene. We first employed the polymerization-through pathway to overcome oxygen inhibition in an open-to-air environment using methyl methacrylate as the model compound. The photoiniferter polymerization using trithiocarbonates as the chain transfer agent (CTA) in DESs exhibited enhanced polymerization rates and achieved a narrow molecular weight distribution. Interestingly, even dithiobenzoate, the CTA with low efficiency for photoiniferter polymerization, exhibited a nearly 4.5-fold increase in the apparent polymerization rate constants when compared to the reaction in dimethyl sulfoxide. Moreover, the stability of the CTAs was increased in DESs for efficient control of molecular weight distribution and preservation of functional chain ends. We then surveyed photocatalysts for photoelectron/energy transfer (PET) RAFT polymerization and found that eosin Y was compatible with DESs. The PET-RAFT polymerization using dithiobenzoate in DESs showed even higher polymerization rates than the photoiniferter polymerization and enabled the polymerization under natural sunlight. Besides methyl methacrylate, other monomers also exhibited an increased polymerization rate in DESs, comparable to reactions in ionic liquids. These results suggest that DESs are effective and green media to facilitate photo-induced RAFT polymerization without additives or tedious degassing processes.

Food Xanthan Polysaccharide Sulfation Process with Sulfamic Acid.

Xanthan is an important polysaccharide with many beneficial properties. Sulfated xanthan derivatives have anticoagulant and antithrombotic activity. This work proposes a new method for the synthesis of xanthan sulfates using sulfamic acid. Various N-substituted ureas have been investigated as process activators. It was found that urea has the greatest activating ability. BBD of xanthan sulfation process with sulfamic acid in 1,4-dioxane has been carried out. It was shown that the optimal conditions for the sulfation of xanthan (13.1 wt% sulfur content) are: the amount of sulfating complex per 1 g of xanthan is 3.5 mmol, temperature 90 °C, duration 2.3 h. Sulfated xanthan with the maximum sulfur content was analyzed by physicochemical methods. Thus, in the FTIR spectrum of xanthan sulfate, in comparison with the initial xanthanum, absorption bands appear at 1247 cm−1, which corresponds to the vibrations of the sulfate group. It was shown by GPC chromatography that the starting xanthan gum has a bimodal molecular weight distribution of particles, including a high molecular weight fraction with Mw > 1000 kDa and an LMW fraction with Mw < 600 kDa. It was found that the Mw of sulfated xanthan gum has a lower value (~612 kDa) in comparison with the original xanthan gum, and a narrower molecular weight distribution and is characterized by lower PD values. It was shown by thermal analysis that the main decomposition of xanthan sulfate, in contrast to the initial xanthan, occurs in two stages. The DTG curve has two pronounced peaks, with maxima at 226 and 286 °C.

Sulfation of arabinogalactan with sulfamic acid under homogeneous conditions in dimethylsulfoxide medium.

Sulfation of larch wood arabinogalactan (AG) with sulfamic acid in dimethylsulfoxide (DMSO) medium in the presence of urea was studied for the first time. The use of DMSO as a solvent instead of more toxic 1,4-dioxane allows to sulfate AG under homogeneous conditions. The sulfated AG with a high sulfur content (12.0–12.5 wt %) was produced by sulfation at a temperature of 85–90 °C, the molar ratio of AG / sulfating agent equal to 1:0.85 during 2–3 h. The introduction of sulfate groups into the structure of arabinogalactan was confirmed by the appearance of new absorption bands in FTIR and FT Raman spectra, characteristic for the vibrations of the sulfate groups. It was proved by 13C NMR spectroscopy that the predominant substitution of the primary hydroxyl groups at C6 carbon atoms of the terminal galactose units of main and side chains of arabinogalactan takes place. Simultaneously, the hydroxyl groups associated with C2 and C4 carbon atoms of galactose unit of the main chain are only partially sulfated. According to results of GPC study, the sulfated AG is characterized by a narrow molecular weight distribution with an average molecular weight of 18.8 kDa and a polydispersity of 1.3.Supplementary InformationThe online version contains supplementary material available at 10.1007/s00226-021-01341-2.

Self-Exchange of Polyelectrolyte in Multilayers: Diffusion as a Function of Salt Concentration and Temperature

Polymer chain diffusion within a hydrated polyelectrolyte complex, PEC, has been measured using an ultrathin film format prepared by the layer-by-layer method. Isotopically labeled self-exchange of deuterated poly(styrene sulfonate), dPSS, with undeuterated PSS of the same narrow molecular weight distribution permitted reliable estimates of whole-molecule diffusion coefficients, D. Narrow molecular weight distribution poly(diallyldimethylammonium), PDADMA, was used as the polycation for the PEC. Extensive pretreatment of starting films was undertaken to remove residual stress, anisotropy, and layering. PSS/PDADMA “multilayers,” PEMUs, thin enough to provide substantial exchange of polyelectrolyte, even with diffusion coefficients as low as 10–16 cm2 s–1, as a function of salt concentration and temperature were measured for this PEC, which has a glass-transition temperature, Tg, close to room temperature. Two molecular weights of dPSS, about 15 and 100 kDa, presumed to be below and above the entanglement molecular weight, respectively, both diffused faster at higher temperatures with respective activation energies, Ea, of about 21 and 53 kJ mol–1, the latter about the same as Ea for the place exchange between two pairs of PSS:PDADMA. Studies of the linear viscoelastic response of macroscopic PECs showed a difference of about 8 °C in the Tg of the two lengths of PSS complexed with the same PDADMA. Increasing concentrations of NaCl influenced D of 100 kDa PSS but not 15 kDa PSS at room temperature. D was faster in the region of the film near the solution interface, again attributed to a lower Tg caused by greater water content at this interface.

RAFT Dispersion Polymerization of Methyl Methacrylate in Mineral Oil: High Glass Transition Temperature of the Core-Forming Block Constrains the Evolution of Copolymer Morphology

RAFT dispersion polymerization of a prototypical methacrylic monomer, methyl methacrylate (MMA), is performed in mineral oil using various poly(lauryl methacrylate) (PLMA) precursors prepared with a trithiocarbonate-based RAFT agent. GPC analysis indicated reasonably narrow molecular weight distributions (Mw/Mn ≤ 1.39) for all diblock copolymers, with 1H NMR studies indicating high MMA conversions (≥95%) for all syntheses. An efficient one-pot synthesis protocol enabled high blocking efficiencies to be achieved when targeting higher PMMA DPs. However, the relatively high glass transition temperature (Tg) of the corresponding core-forming PMMA block unexpectedly constrains the evolution in copolymer morphology during polymerization-induced self-assembly (PISA). More specifically, well-defined PLMA22–PMMAx spheres (x = 19–39) and relatively short worms (x = 69–97) can be obtained at 90 °C when using a PLMA22 precursor but targeting higher x values (x ≥ 108) invariably leads to colloidally unstable aggregates of spheres, rather than long worms or vesicles. Interestingly, similar constraints were observed when targeting higher solids, when using n-dodecane instead of mineral oil, or when employing an alternative steric stabilizer block. Raising the PISA synthesis temperature from 90 to 115 °C (i.e., from below to above the Tg of the final PMMA block) does not alleviate this unexpected problem. Moreover, only spherical nanoparticles can be obtained at 115 °C when targeting PMMA DPs between 50 and 400 with the same PLMA22 precursor. This suggests that nanoparticle formation may occur by a chain expulsion/insertion mechanism at this relatively high reaction temperature. PLMA22–PMMAx nanoparticles were characterized in terms of their particle size and morphology using dynamic light scattering (DLS), transmission electron microscopy (TEM), and small-angle X-ray scattering (SAXS). DLS and TEM studies of a 0.1% w/w dispersion of PLMA22–PMMA69 short worms indicated an irreversible worm-to-sphere transition on heating from 20 to 150 °C. Oscillatory rheology and TEM studies indicated that this thermal transition was only partially reversible for a 20% w/w dispersion of PLMA22–PMMA69 short worms.

Lewis Pair Catalyzed Regioselective Polymerization of (E,E)-Alkyl Sorbates for the Synthesis of (AB)n Sequenced Polymers.

In this contribution, Lewis pairs (LPs) composed of N-heterocyclic olefins (NHOs) with different steric hindrance and nucleophilicity as Lewis bases (LBs) and Al-based compounds with comparable acidity but different steric hindrance as Lewis acids (LAs) were applied for 1,4-selective polymerization of (E,E)-methyl sorbate (MS) and (E,E)-ethyl sorbate (ES). The effects of steric hindrance, electron-donating ability, and acidity of LPs on MS and ES polymerization were systematically investigated. High catalytic activity and high initiation efficiency can be achieved, leading to the formation of PMS with 100 % 1,4-selectivity, tunable molecular weight (Mw up to 333 kg mol-1 ), and narrow molecular weight distribution (MWD). Block copolymerization of ES and methyl methacrylate (MMA) was also realized. Meanwhile, this system can be applied to other homologous conjugated diene substrates. Furthermore, simple chemical reactions can efficiently convert PMS to different polymers with strict (AB)n sequence structures, such as poly(sorbic acid), poly(propylene-alt-methyl acrylate), poly(propylene-alt-acrylic acid), poly(propylene-alt-allyl alcohol), and poly(ethylene-alt-2-butylene).

Lewis Pair Catalyzed Regioselective Polymerization of (E,E)‐Alkyl Sorbates for the Synthesis of (AB)n Sequenced Polymers

AbstractIn this contribution, Lewis pairs (LPs) composed of N‐heterocyclic olefins (NHOs) with different steric hindrance and nucleophilicity as Lewis bases (LBs) and Al‐based compounds with comparable acidity but different steric hindrance as Lewis acids (LAs) were applied for 1,4‐selective polymerization of (E,E)‐methyl sorbate (MS) and (E,E)‐ethyl sorbate (ES). The effects of steric hindrance, electron‐donating ability, and acidity of LPs on MS and ES polymerization were systematically investigated. High catalytic activity and high initiation efficiency can be achieved, leading to the formation of PMS with 100 % 1,4‐selectivity, tunable molecular weight (Mw up to 333 kg mol−1), and narrow molecular weight distribution (MWD). Block copolymerization of ES and methyl methacrylate (MMA) was also realized. Meanwhile, this system can be applied to other homologous conjugated diene substrates. Furthermore, simple chemical reactions can efficiently convert PMS to different polymers with strict (AB)n sequence structures, such as poly(sorbic acid), poly(propylene‐alt‐methyl acrylate), poly(propylene‐alt‐acrylic acid), poly(propylene‐alt‐allyl alcohol), and poly(ethylene‐alt‐2‐butylene).

High-Yield Synthesis of Molecular Bottlebrushes via PISA-Assisted Grafting-from Strategy.

To prepare molecular bottlebrushes with high yield via a grafting-from strategy using a reversible deactivation radical polymerization (RDRP) technique has always been a big challenge due to the intra- and intermolecular radical-radical coupling. Herein, a polymerization-induced self-assembly (PISA)-assisted grafting-from strategy based on reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization was developed to synthesize the Janus molecular bottlebrushes with a well-defined structure and high yield using polynorbornene-g-(poly(ethylene glycols)-branch-RAFT agent) (PNB-g-(PEG-branch-CTA)) as a solvophilic multifunctional macro-CTA. The results indicated the biradical coupling terminations of propagating side chains could be significantly suppressed due to the nanoconfinement effect in the PISA of the generated Janus molecular bottlebrushes. Janus molecular bottlebrushes with a narrow molecular weight distribution (Mw/Mn < 1.25) and negligible intermolecular cross-linking at monomer conversion as high as 84% were prepared, demonstrating the efficiency and versatility of the PISA-assisted grafting-from approach.