Naphthalene Diimide Units Research Articles

In Situ Synthesis of Copper-Based Metal-Organic Frameworks with Ligand Defects for Electrochemical Reduction of CO2 into C2 Products.

Electrochemical reduction of CO2 into high-value-added products is a potential approach to solving environmental problems but is limited by poor product selectivity and low efficiency. Metal-organic framework (MOF) materials have been considered one of the most promising catalysts, but their application is limited by complicated preparation processes, especially during the synthesis of organic ligands. In this work, a new three-dimensional Cu-MOF (JXUST-301) with high porosity was constructed based on the naphthalene diimide (NDI) ligand. Furthermore, JXUST-301 with ligand defects (JXUST-301D) originating from the missing NDI unit was synthesized via an in situ reaction. The presence of ligand defects endows JXUST-301D with a better CO2RR performance with a FEC2 of 56.7% and a jC2 of -162.4 mA cm-2. Mechanistic studies revealed that the hierarchical pore structure and amino sites are created from the absence of the NDI unit, which promotes the exposure of catalytically active sites and CO2 enrichment. Furthermore, the electronic structure of the Cu sites is modulated to upshift the d-band center, facilitating chemical adsorption and activation of key reaction intermediates. This work provides new insight into the in situ preparation of efficient Cu-MOF catalysts by introducing defects for the CO2RR.

Electroactive and Self‐healing Polyurethane Doped Tin Oxide Interlayers for Efficient Organic Solar Cells†

Comprehensive SummaryTin oxide (SnO2) has been widely used as an electron transport layer (ETL) in optoelectronic devices. However, there are numerous surface or bulk defects in SnO2, working as charge recombination centers to degrade device. Here, an electroactive and self‐healing polyurethane (PHNN) was designed by integrating conjugated unit – naphthalene diimide (NDI) into a typical polyurethane backbone. Numerous hydrogen bonds and π interactions in PHNN work as non‐covalent interactions to endow this polymer with superior self‐healing properties. PHNN contains lots of aliphatic amine and carbonyl groups, which effectively passivate the defects in SnO2. The π stacking of NDI units will facilitate electron delocalization, endowing PHNN with electrical activity compared with traditional polyurethane. Doping SnO2 with PHNN can improve the conductivity and reduce the work function of SnO2 layer, which is conducive to efficient charge extraction and transport. Using PHNN doped SnO2 as ETL for PM6: Y6 and PM6: BTP‐eC9 based inverted organic solar cells can achieve a high efficiency of 17.16% and 17.51%, respectively. Devices containing doped SnO2 ETL show significantly improved efficiency and stability. Thus, the electroactive polyurethane doped SnO2 interlayers show high performance interfacial modification to align energy‐levels in solar cell devices, which have promising applications in organic electronics.

Charge Transfer and Intersystem Crossing in Compact Naphthalenediimide-Phenothiazine Triads: Synthesis and Study of the Photophysical Property with Transient Optical and Electron Paramagnetic Resonance Spectroscopic Methods.

In order to obtain a long-lived charge separation (CS) state in compact electron donor-acceptor molecular systems, we prepared a series of naphthalenediimide (NDI)-phenothiazine (PTZ) triads, with phenylene as the linker between the donor and acceptor. Conformation restriction is imposed to control the mutual orientation of the NDI and PTZ units by attaching methyl groups on the phenylene linker to tune the electronic coupling between the donor and the acceptor. Moreover, the PTZ moiety was oxidized to sulfoxide to tune the ordering of the CS state and the 3LE state (LE: locally excited state). UV-vis absorption spectra indicate electronic coupling between NDI with the phenylene linker as well as the PTZ units, manifested by the appearance of a charge-transfer (CT) absorption band, whereas this coupling is devoid in the triads with conformation restriction imposed. Fluorescence is strongly quenched in the triads compared to the reference compound, indicating electron transfer upon photoexcitation. Femtosecond transient absorption spectra indicate that the CS takes 0.8 ps, and then the 3LE state is formed by charge recombination in 83 ps. Nanosecond transient absorption (ns-TA) spectra show that the 3NDI state was observed in nonpolar solvents such as cyclohexane (triplet state lifetime: 95.7 μs), whereas the CS state was observed in more polar solvents. The CS state lifetimes are up to 1.2 μs (in toluene). Time-resolved electron paramagnetic resonance spectra of the triads in toluene consist of two types of signals: CS states (narrower signals, ∼10 mT) and 3LE states (broader signals, ∼50 to 200 mT). In the spectra of the triads containing PTZ, the CS state signals dominate, whereas for the triads containing oxidized PTZ, the 3NDI signals (zero-field splitting D ≈ 2000 MHz) prevail, both observations being in agreement with the ns-TA spectral studies. The electron spin polarization phase pattern of the 3NDI states of the triads indicates that the intersystem crossing (ISC) mechanism is spin-orbit charge-transfer ISC. Considering the 3CS state as ion pairs, the electron-exchange energy (J) is determined to be -39 to -59 MHz, and the electron spin dipolar interaction is 83-92 MHz.

Enhancement of the charge-generation efficiency for a naphthalene diimide-based polymer semiconductor by using a pyrene-substituted n-dopant

A new n-type dopant featuring a pyrene unit was developed, which shows better charge-generation efficiency for a naphthalene diimide (NDI)-based conjugated polymer than N-DMBI due to the distinctive interaction between the pyrene and the NDI units.

Theoretical elucidation of the effect of the linkage and orientation of carbazole and naphthalenediimide on the TADF and RTP propensities.

Thermally activated delayed fluorescence (TADF) and room temperature phosphorescence (RTP) are most promising processes for harvesting triplet excitons in organic light-emitting diodes. In this work, the effect of the linkage between the carbazole (Cz) donor (D) and the naphthalenediimide (NDI) acceptor (A) on the TADF and RTP propensities is elucidated using density functional theory computations employing D-A, D-A-D, D-π-A, and D-π-A-π-D structural designs. The effects of the dihedral angle between the donor and acceptor units on the energy difference between the singlet and triplet excited states (ΔEST), the spin-orbit coupling (SOC) constants, and radiative (kr), intersystem crossing (kISC) and reverse intersystem crossing (kRISC) rates are unravelled. The molecules possessing a direct linkage between Cz and NDI exhibit large ΔEST values due to substantial overlap between the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO). However, the insertion of a phenyl spacer between the Cz and NDI units led to disjoint HOMO and LUMO and consequently resulted in a small ΔEST. Furthermore, the presence of two donors with and without a phenyl spacer on NDI resulted in a high-lying triplet state (T2) that is energetically lower than the lowest singlet excited state (S1), hence providing additional channels to the TADF and RTP processes. Also, the orientation of Cz and NDI in the ortho-positions of the phenyl unit resulted in a T1 state with dominant LE character which led to moderate spin-orbit coupling constants and highest kr rates compared to the analogous meta- and para-linked derivatives. Thus, the ortho-derivatives possessed small ΔEST, charge transfer dominated S1, joint holes and electrons for the T1 state, characteristic of local excitation, high SOC, and promising rISC and kr rates. Overall, the phenyl linked derivatives possess TADF characteristics, while the directly linked analogues show RTP propensity.

Effect of the charge-separated state on the 3MLCT state: Synthesis and study of the photophysics of electron donor-acceptor dyads based on Pt(II)-Schiff base coordination framework and naphthalenediimide chromophore

We prepared Pt(II)-Salen Schiff base complexes with a naphthalenediimide (NDI) unit attached on the coordination framework, to study the intersystem crossing (ISC), the charge separation, and the possible formation of a long-lived triplet charge separated (CS) state. The Pt(II)-Schiff base coordination framework acts as electron donor and it shows ultrafast ISC (<1 ps) and small Stokes shift. NDI acts as electron acceptor. The two units are attached either via a phenyl linker (Pt-NDI) or phenyl ethynyl linker (Pt-CC-NDI). Negligible electronic interaction between the Pt(II)-Schiff base coordination framework and the NDI unit at ground state was observed for both dyads, whereas the phosphorescence of the Pt(II)-Schiff base coordinated framework was quenched to large extent in the dyads, as compared to the reference complexes containing no NDI unit, especially in polar solvents. Electrochemical and optical spectral data show that the CS state energy is 1.93 eV, 1.82 eV, 1.54 eV, 1.43 eV in n-hexane (HEX), toluene (TOL), tetrahydrofuran (THF), acetonitrile (ACN), respectively. In comparison, the 3MLCT state and 3NDI state energy are 1.97 and 2.04 eV, respectively. Nanosecond transient absorption spectra show the formation of the 3MLCT state for Pt-CC-NDI, whose lifetimes is shortened in polar solvents (τT = 3.5 µs, 2.1 µs, 22 ns, and 19 ns in HEX, TOL, THF and ACN, respectively), similar trend was observed for Pt-NDI. Femtosecond transient absorption spectra show that the charge separation takes less than 1 ps both in toluene and acetonitrile. Quenching of the otherwise long-lived triplet excited state (3.5 µs) by a short lived CS state may be developed as a photo-protection mechanism similar to that found in natural photosynthetic apparatus.

Use in Photoredox Catalysis of Stable Donor–Acceptor Covalent Organic Frameworks and Membrane Strategy

AbstractOptoelectronic attributes notwithstanding donor–acceptor covalent organic frameworks (D–A COFs) are not durable photocatalysts in many cases. Herein, a stabilization strategy of D–A COFs by intramolecular hydrogen (H)‐bonds and a membrane‐based mass transfer strategy for photocatalytic modulation are reported. The crystalline stability design of COF is cored at the strong π–π interactions and the H‐bonds of adjacent tetrakis(4‐formylphenyl)pyrene and naphthalenediimide units and the D–A charge transfer is designed for efficiency optimization. The well‐defined, stable structure and charge dynamics of D–A COF, and the structure‐controlled reactive oxygen species yields are confirmed. In two photoredox models, the COF presents both robust activity and stability and is further integrated with the mass transfer optimization of the COFs/polyvinylidene fluoride membrane. The membrane is recycled at least 15 times, and the turnover frequency value of g‐scale amine coupling is as high as 62.4 h−1. This work offers a facile approach to the stabilization design of D–A COFs and explores a general membrane‐based mass transfer strategy for photocatalysis.

Naphthalene Diimide-Functionalized Half-Sandwich Ru(II) Complexes as Mitochondria-Targeted Anticancer and Antimetastatic Agents.

In this work, four naphthalene diimide (NDI)-functionalized half-sandwich Ru(II) complexes Ru1-Ru4 bearing the general formula [(η6-arene)RuII(N^N)Cl]PF6, where arene = benzene (bn), p-cymene (p-cym), 1,3,5-trimethylbenzene (tmb), and hexamethylbenzene (hmb), have been synthesized and characterized. By introducing the NDI unit into the N,N-chelating ligand of these half-sandwich complexes, the poor luminescent half-sandwich complexes are endowed with excellent emission performance. Besides, modification on the arene ligand of arene-Ru(II) complexes can influence the electron density of the metal center, resulting in great changes in the kinetic properties, catalytic activities in the oxidative conversion of NADH to NAD+, and biological activities of these compounds. Particularly, Ru4 exhibits the highest reactivity and the strongest inhibitory activity against the growth of three tested cancer cell lines. Further study revealed that Ru4 can enter cells quickly in an energy-dependent manner and preferentially accumulate in the mitochondria of MDA-MB-231 cells, inducing cell apoptosis via reactive oxygen species overproduction and mitochondrial dysfunction. Significantly, Ru4 can effectively inhibit the cell migration and invasion. Overall, the complexation with NDI and modification on the arene ligand endowed the half-sandwich Ru(II) complexes with improved spectroscopic properties and anticancer activities, highlighting their potential applications for cancer treatment.

Enhancing the Backbone Coplanarity of n-Type Copolymers for Higher Electron Mobility and Stability in Organic Electrochemical Transistors.

Electron-transporting (n-type) conjugated polymers have recently been applied in numerous electrochemical applications, where both ion and electron transport are required. Despite continuous efforts to improve their performance and stability, n-type conjugated polymers with mixed conduction still lag behind their hole-transporting (p-type) counterparts, limiting the functions of electrochemical devices. In this work, we investigate the effect of enhanced backbone coplanarity on the electrochemical activity and mixed ionic-electronic conduction properties of n-type polymers during operation in aqueous media. Through substitution of the widely employed electron-deficient naphthalene diimide (NDI) unit for the core-extended naphthodithiophene diimide (NDTI) units, the resulting polymer shows a more planar backbone with closer packing, leading to an increase in the electron mobility in organic electrochemical transistors (OECTs) by more than two orders of magnitude. The NDTI-based polymer shows a deep-lying lowest unoccupied molecular orbital level, enabling operation of the OECT closer to 0 V vs Ag/AgCl, where fewer parasitic reactions with molecular oxygen occur. Enhancing the backbone coplanarity also leads to a lower affinity toward water uptake during cycling, resulting in improved stability during continuous electrochemical charging and ON–OFF switching relative to the NDI derivative. Furthermore, the NDTI-based polymer also demonstrates near-perfect shelf-life stability over a month-long test, exhibiting a negligible decrease in both the maximum on-current and transconductance. Our results highlight the importance of polymer backbone design for developing stable, high-performing n-type materials with mixed ionic-electronic conduction in aqueous media.

Charge Separation/Recombination, Intersystem Crossing, and Unusually Slow Intramolecular Triplet-Triplet Energy Transfer in Naphthalenediimide-Anthracene Compact Energy Donor-Acceptor Dyads.

Three anthracene (An)-naphthalenediimide (NDI) compact electron donor-acceptor dyads were prepared. Femtosecond transient absorption (fs-TA) spectra show fast charge separation (ca. 0.9-1.7 ps) and relatively slow charge recombination (ca. 8-565 ps) upon photoexcitation; moreover, the 3An state was observed for 9-An-NDI, whereas the final state is 3NDI for both 9-An-Ph-NDI and 2-An-Ph-NDI, which have an intervening phenyl linker between the An and NDI units. Nanosecond transient absorption (ns-TA) spectra indicate that the lowest triplet state of all the dyads is 3An, with triplet lifetimes of 139-354 μs. An unusually slow intramolecular triplet-triplet energy transfer (TTET) was observed for 9-An-Ph-NDI and 2-An-Ph-NDI (32-85 ns). Time-resolved electron paramagnetic resonance (TREPR) spectroscopy confirms that the intersystem crossing (ISC) mechanism is spin orbit charge transfer ISC (SOCT-ISC) for all the dyads; for 9-An-NDI, only the 3An state was observed, while for the other two dyads, both 3NDI and 3An states were observed, with their relative population changing with increasing delay time, which supports TTET.

Effects of Molecular Encapsulation on the Photophysical and Charge Transport Properties of a Naphthalene Diimide Bithiophene Copolymer.

Engineering the molecular structure of conjugated polymers is key to advancing the field of organic electronics. In this work, we synthesized a molecularly encapsulated version of the naphthalene diimide bithiophene copolymer PNDIT2, which is among the most popular high charge mobility organic semiconductors in n-type field-effect transistors and non-fullerene acceptors in organic photovoltaic blends. The encapsulating macrocycles shield the bithiophene units while leaving the naphthalene diimide units available for intermolecular interactions. With respect to PNDIT2, the encapsulated counterpart displays an increased backbone planarity. Molecular encapsulation prevents preaggregation of the polymer chains in common organic solvents, while it permits π-stacking in the solid state and promotes thin film crystallinity through an intermolecular-lock mechanism. Consequently, n-type semiconducting behavior is retained in field-effect transistors, although charge mobility is lower than in PNDIT2 due to the absence of the fibrillar microstructure that originates from preaggregation in solution. Hence, molecularly encapsulating conjugated polymers represent a promising chemical strategy to tune the molecular interaction in solution and the backbone conformation and to consequently control the nanomorphology of casted films without altering the electronic structure of the core polymer.

A Tetrathiafulvalene/Naphthalene Diimide-Containing Metal-Organic Framework with fsc Topology for Highly Efficient Near-Infrared Photothermal Conversion.

Metal-organic frameworks (MOFs) provide broad prospects for the development of new photothermal conversion materials, while their design and synthesis remain challenging. A new Zn-MOF (1) containing both tetrathiafulvalene (TTF) as an electron donor and naphthalene diimide (NDI) as an electron acceptor was constructed by using a space limiting effect. The material exhibited wide absorption peaks in the near-infrared region, indicating that there was strong charge transfer interaction between the TTF and NDI units and providing the possibility of photothermal conversion. 1 shows efficient near-infrared photothermal conversion performance. Under 808 nm laser (0.4 W cm-2) illumination, the temperature of 1 increased rapidly from room temperature to 250 °C, with good thermal stability and cycle durability. This work provides an efficient strategy for promising materials in photothermal therapy.

Controlled n-Doping of Naphthalene-Diimide-Based 2D Polymers.

2D polymers (2DPs) are promising as structurally well-defined, permanently porous, organic semiconductors. However, 2DPs are nearly always isolated as closed shell organic species with limited charge carriers, which leads to low bulk conductivities. Here, the bulk conductivity of two naphthalene diimide (NDI)-containing 2DP semiconductors is enhanced by controllably n-doping the NDI units using cobaltocene (CoCp2 ). Optical and transient microwave spectroscopy reveal that both as-prepared NDI-containing 2DPs are semiconducting with sub-2eV optical bandgaps and photoexcited charge-carrier lifetimes of tens of nanoseconds. Following reduction with CoCp2 , both 2DPs largely retain their periodic structures and exhibit optical and electron-spin resonance spectroscopic features consistent with the presence of NDI-radical anions. While the native NDI-based 2DPs are electronically insulating, maximum bulk conductivities of >10-4 Scm-1 are achieved by substoichiometric levels of n-doping. Density functional theory calculations show that the strongest electronic couplings in these 2DPs exist in the out-of-plane (π-stacking) crystallographic directions, which indicates that cross-plane electronic transport through NDI stacks is primarily responsible for the observed electronic conductivity. Taken together, the controlled molecular doping is a useful approach to access structurally well-defined, paramagnetic, 2DP n-type semiconductors with measurable bulk electronic conductivities of interest for electronic or spintronic devices.

Amphiphilic conjugated block copolymers as NIR-bioimaging probes

A novel method for creating a semiconducting nanoparticles of the donor–acceptor conjugated polymer p(IDT-NDI) containing indacenodithienothiophene (IDT) and naphthalene diimide (NDI) units is presented.

Naphthalene diimide-based random terpolymer acceptors for constructing all-polymer solar cells with enhanced fill factors.

All-polymer solar cells (all-PSCs) with mechanical and thermal stability have potential for applications in flexible devices. Polymer acceptors based on naphthalene diimide (NDI) have been widely studied because of their strong electron affinity, high electron mobility, and high mechanical reliability. However, controlling the film morphology of the polymer–polymer blends of NDI-based all-PSCs is difficult. Consequently, all-PSCs based on NDI building blocks exhibit a low fill factor (FF) and a lower power-conversion efficiency (PCE) than state-of-the-art polymer solar cells. In this work, we added a small amount of dicyanodistyrylbenzene (DCB) unit to the NDI-based polymer acceptor N2200 through random copolymerization and synthesized a series of NDI-based terpolymer acceptors PNDIx, where x is the molar concentration of DCB units relative to NDI units. PNDI5 and PNDI10, corresponding to 5% and 10% molar concentrations of DCB, respectively, showed lower crystallization and good miscibility with PBDB-T, a widely used electron-donating copolymer, than the terpolymer based on DCB-free N2200. Moreover, compared to the PBDB-T:N2200 device, the PNDI5-based device exhibited a much higher PCE (8.01%), and an enhanced FF of 0.75 in all-PSCs. These results indicate that ternary random copolymerization is a convenient and effective strategy for optimizing the film morphology of NDI-based polymers, and that the resulting terpolymer acceptor is a promising n-type acceptor for constructing high-performance all-PSCs.

A highly contorted push-pull naphthalenediimide dimer and evidence of intramolecular singlet exciton fission.

Singlet fission is a process by which two molecular triplet excitons are generated subsequent to the absorption of one photon. Molecules that enable singlet fission have triplet state energy at least half of the bright singlet state energy. This stringent energy criteria have challenged chemists to device new molecular and supramolecular design principles to modulate the singlet-triplet energy gap and build singlet fission systems from a wide range of organic chromophores. Herein, we report for the first time intramolecular singlet fission in the seminal naphthalenediimide (NDI) scaffold constrained in a push-pull cyclophane architecture, while individually the NDI chromophore does not satisfy the energy criterion. The challenging synthesis of this highly contorted push-pull cyclophane is possible from the preorganized pincer-like precursor. The special architecture establishes the shortest co-facial NDI⋯NDI contacts (3.084 Å) realized to date. Using broadband femtosecond transient absorption, we find that the correlated T-T pair forms rapidly within 380 fs of photoexcitation. Electronic structure calculations at the level of state-averaged CASSCF (ne,mo)/XMCQDPT2 support the existence of the multi-excitonic T-T pair state, thereby confirming the first example of singlet exciton fission in a NDI scaffold.

Spin-Orbit Charge-Transfer Intersystem Crossing of Compact Naphthalenediimide-Carbazole Electron-Donor-Acceptor Triads.

Compact electron donor-acceptor triads based on carbazole (Cz) and naphthalenediimide (NDI) were prepared to study the spin-orbit charge-transfer intersystem crossing (SOCT-ISC). By variation of the molecular conformation and electron-donating ability of the carbazole moieties, the electronic coupling between the two units was tuned, and as a result charge-transfer (CT) absorption bands with different magnitudes were observed (ε = 4000-18 000 M-1 cm-1). Interestingly, the triads with NDI attached at the 3-C position or with a phenyl spacer at the N position of the Cz moiety, thermally activated delayed fluorescence (TADF) was observed. Femtosecond transient absorption (fs-TA) spectroscopy indicated fast electron transfer (0.8-1.5 ps) from the Cz to NDI unit, followed by population of the triplet state (150-600 ps). Long-lived triplet states (up to τT = 45-50 μs) were observed for the triads. The solvent-polarity-dependent singlet-oxygen quantum yield (ΦΔ) is 0-26%. Time-resolved electron paramagnetic resonance (TREPR) spectral study of TADF molecules indicated the presence of the 3CT state for NDI-Cz-Ph (zero-field-splitting parameter D = 21 G) and an 3LE state for NDI-Ph-Cz (D = 586 G). The triads were used as triplet photosensitizers in triplet-triplet annihilation upconversion by excitation into the CT absorption band; the upconversion quantum yield was ΦUC = 8.2%, and there was a large anti-Stokes shift of 0.55 eV. Spatially confined photoexcitation is achieved with the upconversion using focusing laser beam excitation, and not the normally used collimated laser beam, i.e., the upconversion was only observed at the focal point of the laser beam. Photo-driven intermolecular electron transfer was demonstrated with reversible formation of the NDI-• radical anion in the presence of the sacrificial electron donor triethanolamine.

Nongeminate Recombination in All-Polymer Solar Cells with Different Crystallinities

One of the most challenging issues facing the organic photovoltaic community is to realize a high fill factor (FF) even with thick active layers. This is because the thick active layer is beneficial for photon absorption but makes charge collection difficult, which is primarily restricted by nongeminate recombination in solar cells. In this work, we have studied nongeminate recombination in four kinds of polymer solar cells based on blends of donor-conjugated polymers with different crystallinities and acceptor-conjugated polymers with a naphthalene diimide unit by using transient photovoltage and photocurrent techniques. As a result, we find that nongeminate recombination is considerably suppressed with an increasing degree of crystallinity of donor polymers, leading to a high FF of more than 0.6 even with an active layer thickness of 300 nm. The origin of such a phenomenon is further discussed in terms of variations in the states of mixed phases with a cascaded energy structure between crystalline domains and amorphous domains evaluated by conductive atomic force microscopy.

Incorporation of Cyano‐Substituted Aromatic Blocks into Naphthalene Diimide‐Based Copolymers: Toward Unipolar n‐Channel Field‐Effect Transistors

The unipolar n‐type polymeric semiconductors are crucial for the development of complementary inverters and complementary logic circuits. To achieve this target, the polymer skeleton should be electron‐deficient, which guarantees the energy‐level alignment between the lowest unoccupied molecular orbital energy level of polymeric materials and the work function of electrode, further permitting effective electron injection. Different from the introduction of the sp2‐hybridized nitrogen atoms and fluorine atoms, cyano‐substituted aromatic blocks are synthesized and further copolymerized with naphthalene diimide (NDI) unit, affording a series of copolymers of PNDI‐BTCN, PNDI‐TVTCN, and PNDI‐SVSCN. The photophysical, electrochemical, and thermal properties of all the copolymers are systematically investigated, and their semiconducting performance is studied by fabricating field‐effect transistors and tested under atmosphere. All the polymers exhibit unipolar n‐type semiconducting performance because of the synergetic effect of strong electron‐withdrawing NDI units and cyano‐substituted aromatic blocks. The highest mobility of 0.20 cm2 V−1 s−1 is obtained. Moreover, theoretical simulation and thin‐film characterization are conducted to reveal the difference in semiconducting performance among the three polymeric materials.

Polymer acceptor based on naphthalene diimide and diethynylbenzo[1,2-b:4,5-b'] dithiophene units for efficient all-polymer solar cells

Five polymer acceptors based on naphthalene diimide (NDI) and diethynylbenzo[1,2-b:4,5-b']dithiophene (DEBDT) alternating units were designed and synthesized. The resultant polymers have identical polymer backbones but different side chains on both NDI and DEBDT units. Their photoelectronic properties can be fine-tuned via systematic side chain engineering. In these polymers, the size of the alkyl side chains on NDI units have minimal impacts on light-harvesting properties and molecular energy levels, while introducing side chain groups into DEBDT units can significantly broad the absorption profile and tune the lowest unoccupied molecular orbital energy levels of polymers. All-polymer solar cells (all-PSCs) based on these polymer acceptors and PBDB-T as the electron-donating polymer were fabricated, where the power conversion efficiencies (PCEs) varied from 0.42% to 5.84%. All-PSCs based on PBDB-T:PNEOD-C8 exhibits the best device performance, which can be ascribed to the lowered energy loss, good light-harvesting capability, balanced charge carrier mobility and proper blend film morphology. These observations indicate that modifying the side chains on both donor and acceptor unit of polymer acceptors is an effective strategy for optimizing their optical and electrical properties, thus lead to high-performance all-PSCs.