Nanorod LED Research Articles

Low-Leakage Current Core-Shell AlGaN Nanorod LED Device Operating in the Ultraviolet-B Band.

Despite the considerable potential of AlGaN-based ultraviolet-B light-emitting diodes (UV-B LEDs) in various applications such as phototherapy, UV curing, plant growth, and analytical technology, their development is still ongoing due to low luminescence efficiency. In this study, we introduced a novel epitaxial growth mechanism to effectively control the height and thickness of AlGaN multiple wells (MWs) on AlGaN nanorod structures using horizontal reactor-based metal-organic chemical vapor deposition (MOCVD). By adjusting the H2 carrier gas flow rate, we could control the growth boundary layer's thickness, successfully separating the AlGaN well and p-AlGaN layer from the substrate. Cathodoluminescence (CL) measurements confirmed the stability of the core-shell AlGaN quantum wells as a highly stable nonpolarized structure, with the wavelength peak remaining almost unchanged under various injection currents. Furthermore, transmission electron microscopy (TEM) provided clear evidence of differentiation, highlighting the distinct formation of the 275 nm AlGaN core and the 295 nm AlGaN shell structure. The developed AlGaN MW structure, characterized by these rectification features, not only demonstrated a significantly improved electroluminescence (EL) peak intensity but also exhibited a much lower leakage current compared to the conventional core-shell AlGaN structure. The newly proposed growth mechanism and advanced nonpolarized core-shell AlGaN structure are expected to serve as excellent alternatives for substantially enhancing the efficiency of the next generation of high-efficiency UV LEDs.

Local optical analysis of InGaN/GaN nanorod LED structures grown on Si(111)

Site- and polarity-controlled core–shell InGaN/GaN nanorod LED structures were grown by metal organic vapor phase epitaxy on Si(111). Scanning transmission electron microscope images reveal uniform multiple quantum wells on polarization-free sidewalls. Spatially resolved photoluminescence mapping on a single nanorod demonstrates that the emission at 3.0 eV stems from the polarization-free m-plane, which is supported by a fast recombination lifetime of ∼490 ps at low temperatures. Quasi-resonant laser excitation demonstrates predominant radiative recombination at low excitation densities, whereas at high excitation densities, the efficiency is lowered by Auger recombination and/or carrier leakage.

Ultrahigh Color Conversion Efficiency Nano-Light-Emitting Diode With Single Electrical Contact

Realizing full color GaN-based micro- and nano-light-emitting diode (nLED) displays with quantum dots (QDs) being the color conversion media remains challenging because of the limited QD color conversion efficiency (CCE). In this article, by using GaN-based nanorod LED as the light source and exciting the QDs by nonradiative energy transfer (NRET) method, a nanorod LED with ultrahigh CCE has been realized. At the same time, a single electrical contact alternating current (ac)-driven electroluminescence (EL) method is adopted to investigate the relationship between frequency and nLED performance. Different from the double terminal injection mode, on the premise of lighting up the nanorod LED, the ac-driven can also avoid the necessity of external p-type and n-type electrodes, thus simplified the manufacturing process of LED. The final optical measurement shows that the CCE of this hybrid color conversion nLED driven by single contact electrode can reach up to 86.67% under the ac voltage of 60 V and an ac frequency of 14.2 MHz, which shows that the energy utilization efficiency can be effectively improved by NRET.

Study of High Polarized Nanostructure Light-Emitting Diode

In this study, we investigated the characteristic difference between the two different configurations of the three-dimensional shell–core nanorod LED. We achieve a degree of polarization of 0.545 for tip-free core–shell nanorod LED and 0.188 for tip core–shell nanorod LED by combining the three-dimensional (3D) structure LED with photonic crystal. The ability of low symmetric modes generated by photonic crystals to enhance degree of polarization has been demonstrated through simulations of photonic crystals. In addition, light confinement in GaN-based nanorod structures is induced by total internal reflection at the GaN/air interface. The combination of 3D core–shell nanorod LED and photonic crystals cannot only produce a light source with a high degree of polarization, but also a narrow divergence angle up to 56°. These 3D LEDs may pave the way for future novel optoelectronic components.

Quantum well engineering in InGaN/GaN core-shell nanorod structures

We report the ability to control relative InN incorporation in InGaN/GaN quantum wells (QWs) grown on the semi-polar and non-polar facets of a core-shell nanorod LED structure by varying the growth conditions. A study of the cathodoluminescence emitted from series of structures with different growth temperatures and pressures for the InGaN QW layer revealed that increasing the growth pressure had the effect of increasing InN incorporation on the semi-polar facets, while increasing the growth temperature improves the uniformity of light emission from the QWs on the non-polar facets.

Horizontally assembled green InGaN nanorod LEDs: scalable polarized surface emitting LEDs using electric-field assisted assembly.

In this study, we report the concerted fabrication process, which is easy to transform the size of active emitting area and produce polarized surface light, using the electric-field-assisted assembly for horizontally assembled many tiny nanorod LEDs between two metal electrodes. We fabricate the millions of individually separated 1D nanorod LEDs from 2D nanorod arrays using nanosphere lithography, etching and cutting process of InGaN/GaN LED structure on a flat sapphire substrate. The horizontally assembled InGaN-based nanorods LED device shows bright (~2,130 cd/m2) and uniform polarized (polarization ratio, ρ = ~0.61) green emissions from large area (0.7 cm × 0.6 cm) planar surface. The realization of a horizontally assembled nanorod LED device can prove the concept of an innovative idea to fabricate formable and scalable polarized surface LED lighting.

Low Ideality Factor and High Output Power Density Nanorod LED Array with Chemical Mechanical Process

not Available.

Application of Nanosphere Lithography to LED Surface Texturing and to the Fabrication of Nanorod LED Arrays

In this study, the process of nanosphere lithography was developed and applied to LED surface texturing and nanorod device fabrication. We observed a texture-size-dependent improvement of total light output. While the increase of output optical power from the textured LEDs can be attributed to surface roughening in the GaN-air surface and to the increase of internal quantum efficiency as the strain is relaxed with the surface texturing, the size-dependent device performance is related to the interaction of generated photons with the textured surface. We further etched through the p-GaN and quantum well region to form p-i-n nanorods on the sample. By inserting a spacer to prevent p-type contact from shorting the n-GaN, we successfully demonstrated nanorod LED arrays. For such a device, a narrower radiation profile was demonstrated from the nanorod LED array as compared with that from the planar LED. The result is associated with the vertical guiding effect along the nanorod cylinder and the Bragg scattering of photons extracted from the sidewall by the rest of the rods. Furthermore, the electroluminescence spectra showed a nearly constant peak wavelength of the nanorod LED arrays, which is due to the suppression of the effect of quantum confined Stark effect.