Nanoparticle-based Lateral Flow Biosensor Research Articles

Rapid, visual, label-based biosensor platform for identification of hepatitis C virus in clinical applications

ObjectivesIn the current study, for the first time, we reported a novel HCV molecular diagnostic approach termed reverse transcription loop-mediated isothermal amplification integrated with a gold nanoparticles-based lateral flow biosensor (RT-LAMP-AuNPs-LFB), which we developed for rapid, sensitive, specific, simple, and visual identification of HCV.MethodsA set of LAMP primer was designed according to 5’untranslated region (5’UTR) gene from the major HCV genotypes 1b, 2a, 3b, 6a, and 3a, which are prevalent in China. The HCV-RT-LAMP-AuNPs-LFB assay conditions, including HCV-RT-LAMP reaction temperature and time were optimized. The sensitivity, specificity, and selectivity of our assay were evaluated in the current study. The feasibility of HCV-RT-LAMP-AuNPs-LFB was confirmed through clinical serum samples from patients with suspected HCV infections.ResultsAn unique set of HCV-RT-LAMP primers were successfully designed targeting on the 5’UTR gene. The optimal detection process, including crude nucleic acid extraction (approximately 5 min), RT-LAMP reaction (67℃, 30 min), and visual interpretation of AuNPs-LFB results (~ 2 min), could be performed within 40 min without specific instruments. The limit of detection was determined to be 20 copies per test. The HCV-RT-LAMP-AuNPs-LFB assay exhibited high specificity and anti-interference.ConclusionsThese preliminary results confirmed that the HCV-RT-LAMP-AuNPs-LFB assay is a sensitive, specific, rapid, visual, and cost-saving assay for identification of HCV. This diagnostic approach has great potential value for point-of-care (POC) diagnostic of HCV, especially in resource-challenged regions.

Development of a multiple cross displacement amplification combined with nanoparticles-based biosensor assay for rapid and sensitive detection of Streptococcus pyogenes

BackgroundS. pyogenes, is a primary pathogen that leads to pharyngitis and can also trigger severe conditions like necrotizing fasciitis and streptococcal toxic shock syndrome (STSS), often resulting in high mortality rates. Therefore, prompt identification and appropriate treatment of S. pyogenes infections are crucial in preventing the worsening of symptoms and alleviating the disease's impact. ResultsIn this study, a newly developed technique called multiple cross displacement amplification (MCDA) was employed to detect S. pyogenes,specifically targeting the speB gene, at a temperature of 63°C within 30 min. Then, an easily portable and user-friendly nanoparticles-based lateral flow biosensor (LFB) assay was introduced for the rapid analysis of MCDA products in just 2 min. The results indicated that the LFB offers greater objectivity compared to Malachite Green and is simpler than electrophoresis. The MCDA-LFB assay boasts a low detection limit of 200 fg and exhibits no cross-reaction with non-S. pyogenes strains. Among 230 clinical swab throat samples, the MCDA-LFB method identified 27 specimens as positive, demonstrating higher sensitivity compared to 23 samples detected positive by qPCR assay and 18 samples by culture. The only equipment needed for this assay is a portable dry block heater. Moreover, each MCDA-LFB test is cost-effective, priced at approximately $US 5.5.ConclusionThe MCDA-LFB assay emerges as a straightforward, specific, sensitive, portable, and user-friendly method for the rapid diagnosis of S. pyogenes in clinical samples.

Rapid and reliable diagnosis of Moraxella catarrhalis infection using loop-mediated isothermal amplification-based testing.

Moraxella catarrhalis (M. catarrhalis) was an important pathogen closely associated with respiratory tract infections. We employed the loop-mediated isothermal amplification (LAMP) coupled with nanoparticle-based lateral flow biosensor (LFB) and fluorescence testing technique for formulating two diagnostic methods for M. catarrhalis detection, termed M. catarrhalis-LAMP-LFB assay and M. catarrhalis-LAMP-FRT, respectively. The M. catarrhalis-LAMP-LFB system incorporated the use of biotin-14-dCTP and a forward loop primer (LF) with a hapten at the 5' end. This design in LAMP reaction enabled the production of double-labeled products that could be effectively analyzed using the lateral flow biosensor (LFB). For the M. catarrhalis-LAMP-FRT assay, the LF was modified with a sequence at 5' end, and a fluorophore, as well as a black hole quencher, were strategically labeled at the 5' end and within the middle of the new LF. The restriction endonuclease Nb.BsrDI could accurately recognize and cleave the newly synthesized double-strand terminal sequences, resulting in the separation of the fluorophore from the black hole quencher and releasing fluorescence signals. Both assays have been proven to be highly sensitive and specific, capable of detecting genomic DNA of M. catarrhalis at concentrations as low as 70 fg, with no cross-reactivity observed with non-M. catarrhalis pathogens. Furthermore, both methods successfully identified M. catarrhalis in all clinical samples within 1h that were confirmed positive by real-time PCR, exhibiting superior sensitivity than conventional culture methods. Herein, the newly developed two LAMP-based assays were rapid and reliable for M. catarrhalis detection and hold significant promise for deployment in point-of-care (POC) settings.

Multiple cross displacement amplification combined with nanoparticle-based lateral flow biosensor for rapid and sensitive detection of Epstein-Barr virus.

Epstein-Barr virus (EBV) is a highly dangerous virus that is globally prevalent and closely linked to the development of nasopharyngeal cancer (NPC). Plasma EBV DNA analysis is an effective strategy for early detection, prognostication and monitoring of treatment response of NPC. Here, we present a novel molecular diagnostic technique termed EBV-MCDA-LFB, which integrates multiple cross displacement amplification (MCDA) with nanoparticle-based lateral flow (LFB) to enable simple, rapid and specific detection of EBV. In the EBV-MCDA-LFB system, a set of 10 primers was designed for rapidly amplifying the highly conserved tandem repeat BamHI-W region of the EBV genome. Subsequently, the LFB facilitate direct assay reading, eliminating the use of extra instruments and reagents. The outcomes showed that the 65°C within 40 minutes was the optimal reaction setting for the EBV-MCDA system. The sensitivity of EBV-MCDA-LFB assay reached 7 copies per reaction when using EBV recombinant plasmid, and it showed 100% specificity without any cross-reactivity with other pathogens. The feasibility of the EBV-MCDA-LFB method for EBV detection was successfully validated by 49 clinical plasma samples. The complete detection process, consisting of rapid template extraction (15 minutes), MCDA reaction (65°C for 40 minutes), and LFB result reading (2 minutes), can be finalized within a 60-minutes duration. EBV-MCDA-LFB assay designed here is a fast, extremely sensitive and specific technique for detecting EBV in field and at the point-of-care (PoC), which is especially beneficial for countries and regions with a high prevalence of the disease and limited economic resources.

Rapid, sensitive and highly specific diagnosis of Moraxella catarrhalis by recombinase polymerase amplification-based biosensor and fluorescence detection

Moraxella catarrhalis (M. catarrhalis) was an underestimated respiratory infection pathogen that has been largely overlooked. The limited availability of rapid and sensitive detection methodologies has hindered M. catarrhalis diagnostic in clinical settings and contributed to its underestimation. To address this issue, we devised two recombinase polymerase amplification (RPA)-based assays for rapid, sensitive and reliable detection of M. catarrhalis, termed M. catarrhalis-RPA-Flu and M. catarrhalis-RPA-LFB, which utilized fluorescence and nanoparticle-based lateral flow biosensor (LFB) for reporting the detection results, respectively. In both assays, the specific copB gene of M. catarrhalis was amplified at 37°C for only a period of 20 minutes. In M. catarrhalis-RPA-Flu system, the detection results were analyzed by either using a real-time fluorescent detector or by direct observation using the naked eye under blue light, while, in M. catarrhalis-RPA-LFB system, biosensors were used for interpreting the results without any specialized instruments. Both methods were able to finalize the entire detection process within a duration of 40 minutes, detect down to 35 fg genomic DNA per test, and correctly differentiate M. catarrhalis from non-M. catarrhalis strains. The feasibility of both techniques was validated by analyzing 96 BALF (Broncho alveolar lavage fluid) samples in clinical settings. Collectively, the newly developed two RPA-based assays exhibit great potential for rapid and accurate identification of M. catarrhalis in standard microbiology laboratories as well as diagnosis of M. catarrhalis infection in clinical settings.

Loop-mediated isothermal amplification coupled with nanoparticle-based lateral flow biosensor for monkeypox virus detection

Monkeypox virus (MPXV) infection is currently an evolving public health concern, highlighting an urgent need for early and rapid detection of MPXV. Here, we present a diagnostic test called MPXV-LAMP-LFB, which combines loop-mediated isothermal amplification (LAMP) and nanoparticle-based lateral flow biosensor (LFB) for the simple, sensitive and specific detection of MPXV and differentiation of its two clades. The MPXV-LAMP-LFB can be conducted at a heating block and the detection results can be visually indicated with the biosensor without any specialized apparatus. Two sets of LAMP primers targeting the D14L and ATI genes were designed for the Central and West African MPXV isolates, respectively. The optimal amplification condition was 64 °C for 40 min. Thus, the MPXV-LAMP-LFB test can be completed within 1 h, incorporating rapid DNA extraction (∼15 min), LAMP reaction (∼40 min) and result indicating (∼5 min). The MPXV-LAMP-LFB assay could detect down to 5 copies of plasmid template and 12.5 copies of pseudotyped virus in simulated blood samples. Furthermore, the MPXV-LAMP-LFB assay correctly identified all the positive controls and successfully avoided cross-reactivity with the non-MPXV pathogens or clinical samples, demonstrating its high specificity. Overall, the MPXV-LAMP-LFB test developed in this study showed great promise as a rapid, sensitive and accurate molecular tool for diagnosing MPXV infection.

Biosensor-Based Multiple Cross Displacement Amplification for the Rapid Detection of Mycobacterium leprae.

Leprosy is an ancient disease caused by Mycobacterium leprae (ML) that remains a public health problem in poverty-stricken areas worldwide. Although many ML detection techniques have been used, a rapid and sensitive tool is essential for the early detection and treatment of leprosy. Herein, we developed a rapid ML detection technique by combining multiple cross displacement amplification (MCDA) with a nanoparticle-based lateral flow biosensor (LFB), termed ML-MCDA-LFB. MCDA induced a rapid isothermal reaction using specific primers targeting the RLEP gene, and the LFB enabled instant visual amplicon detection. The pure genomic DNA of ML and nucleic acids from various pathogens were employed to evaluate and optimize the ML-MCDA-LFB assay. The optimal conditions for ML-MCDA-LFB were 68 °C and 35 min, respectively. The limit of detection for pure ML genomic DNA was 150 fg per vessel, and the specificity of detection was 100% for the experimental strains. Additionally, the entire detection process could be performed within 40 min, including the isothermal amplification (35 min) and result confirmation (1-2 min). Hence, the ML-MCDA-LFB assay was shown to be a rapid, sensitive, and visual method for detecting ML and could be used as a potential tool for early clinical diagnosis and field screening of leprosy.

Loop-mediated isothermal amplification combined with lateral flow biosensor for rapid and sensitive detection of monkeypox virus.

The ongoing outbreak of the monkeypox, caused by monkeypox virus (MPXV), has been a public health emergency of international concern, indicating an urgent need for rapid and sensitive MPXV detection. Here, we designed a diagnostic test based on loop-mediated isothermal amplification (LAMP) and nanoparticle-based lateral flow biosensor(LFB)for diagnosis of MPXV infection, termed MPX-LAMP-LFB. A set of six LAMP primers was designed based the ATI gene of MPXV, and LAMP amplification of MPXV templates was performed at 63°C for only 40 min. The results were rapidly and visually decided using the LFB test within 2 min. The MPX-LAMP-LFB assay can specifically detect MPXV strains without cross-reaction with non-MPXV pathogens. The sensitivity of the MPX-LAMP-LFB assay is as low as 5 copies/μl of plasmid template and 12.5 copies/μl of pseudovirus in human blood samples. The whole process of the MPX-LAMP-LFB assay could be completed ~1 h, including rapid template preparation (15 min), LAMP reaction (40 min)and result reporting (<2 min). Collectively, MPX-LAMP-LFB assay developed here is a useful tool for rapid and reliable diagnosis of MPXV infection.

Highly sensitive and rapid identification of coxsackievirus A16 based on reverse transcription multiple cross displacement amplification combined with nanoparticle-based lateral flow biosensor assay.

One of the main pathogens responsible for human hand, foot, and mouth disease (HFMD), coxsackievirus A16, has put young children's health at danger, especially in countries in the Asia-Pacific region. Early quick identification is essential for the avoidance and control of the disorder since there are no vaccinations or antiviral medications available to prevent and manage CVA16 infection. Here, we describe the creation of an easy, speedy, and accurate CVA16 infection detection approach using lateral flow biosensors (LFB) and reverse transcriptionmultiple cross displacement amplification (RT-MCDA). A group of 10 primers was developed for the RT-MCDA system in order to amplify the genes in an isothermal amplification device while targeting the highly conserved region of the CVA16 VP1 gene. Then, without requiring any extra tools, RT-MCDA amplification reaction products might well be detected by visual detection reagent (VDR) and LFB. The outcomes showed that 64°C within 40 min was the ideal reaction setting for the CVA16-MCDA test. Target sequences with <40 copies might be found using the CVA16-MCDA. There was no cross-reaction among CVA16 strains and other strains. The findings demonstrated that the CVA16-MCDA test could promptly and successfully identify all of the CVA16-positive (46/220) samples identified by the traditional real-time quantitative polymerase chain reaction (qRT-PCR) assays for 220 clinical anal swab samples. The whole process, such as the processing of the sample (15 min), the MCDA reaction (40 min), and the documenting of the results (2 min), could be finished in 1 h. The CVA16-MCDA-LFB assay, which targeted the VP1 gene, was an efficient, simple, and highly specific examination that might be used extensively in rural regions' basic healthcare institutions and point-of-care settings.

Visual and rapid identification of Chlamydia trachomatis and Neisseria gonorrhoeae using multiplex loop-mediated isothermal amplification and a gold nanoparticle-based lateral flow biosensor.

Sexually transmitted chlamydia and gonorrhea infections caused by the bacteria Chlamydia trachomatis and Neisseria gonorrhoeae remain a major public health concern worldwide, particularly in less developed nations. It is crucial to use a point of care (POC) diagnostic method that is quick, specific, sensitive, and user-friendly to treat and control these infections effectively. Here, a novel molecular diagnostic assay, combining multiplex loop-mediated isothermal amplification (mLAMP) with a visual gold nanoparticles-based lateral flow biosensor (AuNPs-LFB) was devised and used for highly specific, sensitive, rapid, visual, and easy identification of C. trachomatis and N. gonorrhoeae. Two unique independent primer pairs were successful designed against the ompA and orf1 genes of C. trachomatis and N. gonorrhoeae, respectively. The optimal mLAMP-AuNPs-LFB reaction conditions were determined to be 67°C for 35min. The detection procedure, involving crude genomic DNA extraction (~5 min), LAMP amplification (35min), and visual results interpretation (<2min), can be completed within 45min. Our assay has a detection limit of 50 copies per test, and we did not observe any cross-reactivity with any other bacteria in our testing. Hence, our mLAMP-AuNPs-LFB assay can potentially be used for POC testing to detect C. trachomatis and N. gonorrhoeae in clinical settings, particularly in underdeveloped regions.

Ultrasensitive and Specific Identification of Monkeypox Virus Congo Basin and West African Strains Using a CRISPR/Cas12b-Based Platform.

Human monkeypox (MPX) is a severe and reemerging infectious disease caused by monkeypox virus (MPXV) and forms two distinct lineages, including Congo Basin and West African clades. Due to the absence of specific vaccines and antiviral drugs, developing a point-of-care (POC) testing system to identify MPXV is critical for preventing and controlling MPX transmission. Here, a CRISPR/Cas12b diagnostic platform was integrated with loop-mediated isothermal amplification (LAMP) to devise a novel CRISPR-MPXV approach for ultrasensitive, highly specific, rapid, and simple detection of MPXV Congo Basin and West African strains, and the detection results were interpreted with real-time fluorescence and a gold nanoparticle-based lateral flow biosensor (AuNP-LFB). The optimal detection process, including genomic DNA extraction (15 min), LAMP preamplification (35 min at 66°C), CRISPR/Cas12b-based detection (5 min at 45°C), and AuNP-LFB readout (~2 min), can be completed within 60 min without expensive instruments. Our assay has a limit of detection of 10 copies per test and produces no cross-reaction with any other types of pathogens. Hence, our CRISPR-MPXV assay exhibited considerable potential for POC testing for identifying and distinguishing MPXV Congo Basin and West African strains, especially in regions with resource shortages. IMPORTANCE Monkeypox (MPX), a reemerging zoonotic disease caused by monkeypox virus (MPXV), causes a smallpox-like disease in humans. Early diagnosis is critical to prevent MPX epidemics. Here, CRISPR/Cas12b was integrated with LAMP amplification to devise a novel CRISPR-MPXV approach to achieve highly specific, ultrasensitive, rapid, and visual identification of MPXV Congo Basin and West African strains.

Rapid detection of monkeypox virus by multiple cross displacement amplification combined with nanoparticle-based biosensor platform.

The current outbreak of monkeypox virus (MPXV) has become a public health emergency of international concern that highlights the need for rapid, sensitive MPXV diagnostic assays. Here, we combined isothermal multiple cross displacement amplification (MCDA) with nanoparticle-based lateral flow biosensor (LFB) to devise a diagnostic test for the diagnosis of MPXV infection (called MPXV-MCDA-LFB) and differentiation of West and Central African MPXV isolates. The MPXV-MCDA-LFB protocol conducts isothermal MCDA reaction for DNA templates followed by LFB detection of preamplification target sequences. Two MCDA primer sets were designed targeting the D41L and ATI genes of Central and West African MPXV isolates, respectively, and the optimal condition of two MCDA reactions was 64°C for 30 min. The two MCDA reactions were decoded by LFB, which was devised for detecting three targets, including two amplicons yielded from two MCDA reactions and a chromatography control. Thus, the MPXV-MCDA-LFB assay could be completed within 50 min including rapid template preparation (15 min), MCDA reaction (30 min) and reporting of result (<5 min). The MPXV-MCDA-LFB method is very sensitive and can detect the target genes (D14L and ATI) with as low as five copies of plasmid template per reaction and 12.5 copies of pseudotyped virus in human blood samples. The MPXV-MCDA-LFB assay does not cross-react with non-MPXV templates, validating its specificity. Therefore, the MPXV-MCDA-LFB assay developed here is a useful tool for rapid and reliable diagnosis of MPXV infection.

Rapid, ultrasensitive, and highly specific identification of Brucella abortus utilizing multiple cross displacement amplification combined with a gold nanoparticles-based lateral flow biosensor.

Brucella abortus (B. abortus) as an important infectious agent of bovine brucellosis cannot be ignored, especially in countries/regions dominated by animal husbandry. Thus, the development of an ultrasensitive and highly specific identification technique is an ideal strategy to control the transmission of bovine brucellosis. In this report, a novel detection protocol, which utilizes multiple cross displacement amplification (MCDA) combined with a gold nanoparticles-based lateral flow biosensor (AuNPs-LFB) targeting the BruAb2_0168 gene was successfully devised and established for the identification of B. abortus (termed B. abortus-MCDA-LFB). Ten specific primers containing engineered C1-FAM (carboxyfluorescein) and D1-biotin primers were designed according to the MCDA reaction mechanism. These genomic DNA extracted from various bacterial strains and whole blood samples were used to optimize and evaluate the B. abortus-MCDA-LFB assay. As a result, the optimal reaction conditions for the B. abortus-MCDA-LFB assay were 66°C for 40 min. The limit of detection of the B. abortus-MCDA-LFB was 10 fg/μl (~3 copies/μl) for genomic DNA extracted from pure cultures of B. abortus isolate. Meanwhile, the B. abortus-MCDA-LFB assay accurately identified all tested B. abortus strains, and there was no cross-reaction with non-B. abortus pathogens. Moreover, the detection workflow of the B. abortus-MCDA-LFB assay for whole blood samples can be completed within 70 min, and the cost of a single test is approximately 5.0 USD. Taken together, the B. abortus-MCDA-LFB assay is a visual, fast, ultrasensitive, low-cost, easy-to-operate, and highly specific detection method, which can be used as a rapid identification tool for B. abortus infections.

Establishment and application of loop-mediated isothermal amplification coupled with nanoparticle-based lateral flow biosensor (LAMP-LFB) for visual and rapid diagnosis of Candida albicans in clinical samples.

Candida albicans is an opportunistic pathogenic yeast that predominantly causes invasive candidiasis. Conventional methods for detecting Candida species are costly, take 3-5 days, and require skilled technicians. Rapid pathogen identification is important in managing invasive candidiasis infection. Here, a novel molecular diagnostic assay termed loop-mediated isothermal amplification combined with nanoparticles-based lateral flow biosensor (LAMP-LFB) was developed for C. albicans rapid detection. A set of six primers was designed based on the C. albicans species-specific internal transcribed spacer 2 (ITS2) gene. The C. albicans-LAMP results were visually reported by LFB within 2min. Various fungal strains representing Candida species, as well as several Gram-negative and Gram-positive bacterial species, were used to determine the analytical sensitivity and specificity of the assay. The optimal LAMP conditions were 64 °C for 40 min, with a sensitivity of 1fg of genomic DNA template from C. albicans pure cultures. No cross-reactions were obtained with non-albicans strains. Thus, the analytical specificity of the LAMP-LFB assay was 100%. The entire procedure could be completed within 85 min, including specimen processing (40min), isothermal reaction (40min), and result reporting (within 2min). In 330 clinical samples (including 30 whole blood, 100 middle segment urine, and 200 sputum samples), all C. albicans-positive (62/330) samples were identified by LAMP-LFB assay, and the diagnostic accuracy was 100% when compared to the traditional clinical cultural-based methods. Thus, this assay can be used as a diagnostic tool for the rapid, accurate, sensitive, low-cost and specific detection of C. albicans strains, especially in resource-limited settings.

Sensitive and visual identification of Chlamydia trachomatis using multiple cross displacement amplification integrated with a gold nanoparticle-based lateral flow biosensor for point-of-care use.

Chlamydia trachomatis is the leading cause of bacterial sexually transmitted infection (STI) and remains a major public health challenge, especially in less-developed regions. Establishing a rapid, inexpensive, and easy-to-interpret point-of-care (POC) testing system for C. trachomatis could be critical for its treatment and limiting further transmission. Here, we devised a novel approach termed a multiple cross displacement amplification integrated with gold nanoparticle-based lateral flow biosensor (MCDA-AuNPs-LFB) for the highly specific, sensitive, user-friendly, and rapid identification of C. trachomatis in clinical samples. A suite of MCDA primers based on the C. trachomatis ompA gene from 14 serological variants (serovar A-K, L1, L2, and L3) were successfully designed and used to establish the assay. Optimal assay conditions were identified at 67°C, and the detection procedure, including nucleic acid preparation (approximately 5 min), MCDA amplification (30 min), and AuNPs-LFB visual readout (within 2 min), was completed within 40 min. The all-in cost for each test was approximately $5.5 USD. The limit of detection (LoD) was 10 copies/reaction, and no cross-reaction was observed with non-C. trachomatis microbes. A total of 135 suspected C. trachomatis-infection genital secretion samples were collected and simultaneously detected using real-time quantitative PCR (qPCR) in our assay. Compared with the qPCR technology, the MCDA-AuNPs-LFB sensitivity, specificity, positive predictive value, and negative predictive value were 100%, 96.20%, 94.92%, and 100%, respectively. Hence, our MCDA-AuNP-LFB assay exhibited considerable potential for POC testing and could be used to identify C. trachomatis in clinical settings, particularly in low-income regions.

Nanoparticle-Based Lateral Flow Biosensor Integrated With Loop-Mediated Isothermal Amplification for Rapid and Visual Identification of Chlamydia trachomatis for Point-of-Care Use.

Chlamydial infection, caused by Chlamydia trachomatis, is the most common bacterial sexually transmitted infection and remains a major public health problem worldwide, particularly in underdeveloped regions. Developing a rapid and sensitive point-of-care (POC) testing for accurate screening of C. trachomatis infection is critical for earlier treatment to prevent transmission. In this study, a novel diagnostic assay, loop-mediated isothermal amplification integrated with gold nanoparticle-based lateral flow biosensor (LAMP-LFB), was devised and applied for diagnosis of C. trachomatis in clinical samples. A set of LAMP primers based on the ompA gene from 14 C. trachomatis serological variants (serovar A-K, L1, L2, L3) was successfully designed and used for the development of C. trachomatis-LAMP-LFB assay. The optimal reaction system can be performed at a constant temperature of 67°C for 35 min. The total assay process, including genomic DNA extraction (~15 min), LAMP reaction (35 min), and LFB readout (~2 min), could be finished within 60 min. The C. trachomatis-LAMP-LFB could detect down to 50 copies/ml, and the specificity was 100%, no cross-reactions with other pathogens were observed. Hence, our C. trachomatis-LAMP-LFB was a rapid, reliable, sensitive, cost-effective, and easy-to-operate assay, which could offer an attractive POC testing tool for chlamydial infection screening, especially in resource starvation settings.

Loop-Mediated Isothermal Amplification Coupled With Nanoparticle-Based Biosensor: A Rapid and Sensitive Method to Detect Mycoplasma pneumoniae.

Mycoplasma pneumoniae (MP), the causative agent of MP pneumonia (MPP), has posed a substantial burden to public health owing to a lack of rapid and effective diagnostic methods. Here, we designed a loop-mediated isothermal amplification (LAMP)-based assay, termed LAMP, combined with a nanoparticle-based lateral flow biosensor (LAMP-LFB) for rapid and sensitive diagnosis of MP.-LAMP-LFB included a set of six primers targeting the community-acquired respiratory distress syndrome (CARDS) toxin gene and was performed optimally at 63°C for only 30 min. The resulting LAMP products could be visually indicated by LFB within 2 min, thus the whole process could be accomplished within an hour. MP-LAMP-LFB’s sensitivity was 50 fg per reaction, which was in complete accordance with these results obtained from real-time turbidity and visual detection reagent (VDR). MP-LAMP-LFB had no cross-reactivity with other pathogens that had similar clinical presentations. Our assay was further validated using 100 nasopharyngeal swab samples collected from children suspected of MPP, and the result was compared with the real-time PCR method. With a positive rate of 50%, the data indicated that MP-LAMP-LFB is a sensitive test for MP detection in clinical settings. Collectively, the MP-LAMP-LFB assay targeting the CARDS toxin gene was a rapid, highly sensitive, and specific test that could be widely applied in point-of-care settings and basic medical facilities in rural areas.

Detection of Haemophilus influenzae by loop-mediated isothermal amplification coupled with nanoparticle-based lateral flow biosensor assay.

BackgroundHaemophilus influenzae was the most aggressive pathogen and formed a major cause of bacterial meningitis and pneumonia in young children and infants, which need medical emergency requiring immediate diagnosis and treatment. However, From isolation to identification of H. influenzae, the traditional diagnose strategy was time-consuming and expensive. Therefore, the establishment of a convenient, highly sensitive, and stable detection system is urgent and critical.ResultsIn this study, we used a combined method to detect H. influenzae. Six specific primers were designed on the basis of outer membrane protein P6 gene sequence of H. influenzae. The reaction condition such as the optimum temperature was 65℃, and the optimum reaction time was 30 min, respectively. Through the loop-mediated isothermal amplification (LAMP) in combination with nanoparticle-based lateral flow biosensor (LFB), the sensitivity of LAMP-LFB showed 100 fg was the lowest genomic DNA templates concentration in the pure cultures. Meanwhile, the specificity of H. influenzae-LAMP-LFB assay showed the exclusive positive results, which were detected in H. influenzae templates. In 55 clinical sputum samples, 22 samples were positive with LAMP-LFB method, which was in accordance with the traditional culture and Polymerase Chain Reaction (PCR) method. The accuracy in diagnosing H. influenzae with LAMP-LFB could reach 100%, compared to culture and PCR method, indicating the LAMP-LFB had more advantages in target pathogen detection.ConclusionsTaken together, LAMP-LFB could be used as an effective diagnostic approach for H. influenzae in the conditions of basic and clinical labs, which would allow clinicians to make better informed decisions regarding patient treatment without delay.Supplementary InformationThe online version contains supplementary material available at 10.1186/s12866-022-02547-5.

Reliable detection of Burkholderia pseudomallei using multiple cross displacement amplification label-based biosensor

BackgroundBurkholderia pseudomallei (B. pseudomallei), as a highly pathogenic organism, causes melioidosis, which is a disease of public health importance in many tropical developing countries. Here, we present and validate a novel detection technique, termed multiple cross displacement amplification combined with nanoparticles-based lateral flow biosensor (MCDA-NB), for identifying B. pseudomallei and diagnosing melioidosis.ResultsB. pseudomallei-MCDA targets the TTS1 (Type III secretion system gene cluster 1) to specifically design ten MCDA primers. The nanoparticles-based biosensor (NB) can be combined with B. pseudomallei-MCDA for visually, objective, simply and rapidly reporting reaction results. The optimal amplification conditions of B. pseudomallei-MCDA were 66 °C for 30 min. Assay’s sensitivity was 100 fg of genomic DNA in the pure cultures, and the analytical specificity was 100% by the examination of 257 strains, including 228 B. pseudomallei and 29 non-B. pseudomallei. As a result, the whole detection procedure was completed within 50 min, including 15 min for genomic DNA preparation, 30 min for l MCDA reaction, and 2 min for the interpretation of the results visually by biosensor.ConclusionsB. pseudomallei-MCDA assay is a rapid, sensitive and specific method for the detection of B. pseudomallei, and can be used as a potential tool for melioidosis diagnose in basic, field and clinical laboratories.

Loop-Mediated Isothermal Amplification Coupled With Nanoparticle-Based Lateral Biosensor for Rapid, Sensitive, and Specific Detection of Bordetella pertussis.

Bordetella pertussis is the most frequent causative agent for pertussis, which is a highly contagious disease. Here, we developed a method based on loop-mediated isothermal amplification (LAMP) and nanoparticle-based lateral flow biosensor (LFB) for the timely diagnosis of B. pertussis infections. A set of six primers was designed for LAMP reactions, and the LAMP results were rapidly and visually indicated using LFB. The recommended condition for the B. pertussis LAMP reactions is 40 min at 66°C. Our results confirmed that the LAMP-LFB assay could specifically detect B. pertussis and did not cross-react with non-B. pertussis isolates. The sensitivity of the B. pertussis LAMP-LFB assay was 50 fg per reaction. In particular, 108 nasopharyngeal swab (NPS) samples were collected to evaluate the B. pertussis LAMP-LFB assay, and the results were compared with those of the quantitative PCR (qPCR) method. The positive rates of B. pertussis LAMP-LFB and qPCR were 40.7% and 38.8%, respectively, and the agreement between the LAMP-LFB and qPCR results was 98%, with a kappa value of 0.96. The whole process of LAMP-LFB can be completed within 1 h, which is much shorter than that of qPCR, including about 15 min of rapid DNA extraction, 40 min of LAMP reaction, and within 2 min of the LFB test. Collectively, the B. pertussis LAMP-LFB assay developed in this report offers a new option for the rapid, reliable, and simple diagnosis of B. pertussis infections.