Extraction Of Nanocellulose Research Articles

Extraction and characterization of spherical nanocellulose from sesame husks.

The objective of this study was to extract and characterize nanocellulose from sesame husks, which are typically discarded as waste by sesame processing facilities. However, these husks are rich in cellulose, presenting a valuable potential source for nanocellulose. Sesame husk cellulose (SHC) was initially isolated through a multi-step process that removed oil, hemicellulose, and lignin. Sesame husk nanocellulose (SHNC) was subsequently obtained via acid hydrolysis. Energy-dispersive X-ray (EDX) analysis revealed a purity of 99.32% for SHNC. The yields of SHC and SHNC were 25.16% and 9.17%, respectively. SHNC exhibited a lower surface charge (-27.2mV) compared to SHC (-15.5mV). FTIR confirmed the presence of characteristic cellulose bands. Dynamic light scattering (DLS) revealed average particle diameters of 2235nm for SHC and 108.1nm for SHNC. Atomic force microscopy (AFM) and field-emission scanning electron microscopy (FE-SEM) analyses showed that SHNC particles were spherical to oval-shaped, with average diameters of 78.41nm and 74.30nm, respectively. The crystallinity index was higher for SHNC (67.74%) compared to SHC (41.02%). Thermogravimetric analysis (TGA) indicated greater thermal stability for SHC (TMax 317°C) compared to SHNC (TMax 287°C). These results demonstrate the potential of sesame husks as a sustainable and valuable source of nanocellulose.

Bleaching Pre-Treatment of Oil Palm Empty Fruit Bunch for Nanocellulose Extraction

Oil palm empty fruit bunch (OPEFB) is one of the waste by-products when palm oil is produced. Although a waste product, it can be turned into a valuable product by extracting nanocellulose through acid hydrolysis. The process requires a few steps; the most important is the pre-treatment process. In this research, bleaching pretreatment was used to characterize empty oil palm fruit bunches as raw materials for hydrolysis reactions to extract nanocellulose. The bleaching process was done using H2O2 and the resulting samples were characterized using FT-IR and SEM. FT-IR analysis revealed that lignin-associated carbonyl groups were removed and there was a decrease in hemicellulose-related acetyl group peaks which confirmed effective pre-treatment. According to Scanning Electron Microscopy (SEM), surface morphology has also changed where the bleached fibres exhibited a rougher surface than the ones that were not bleached. Bleaching is proven to be successful at removing surface impurities, hemicellulose, and lignin and isolating the cellulose for the acid hydrolysis process.

Extraction and characterization of nanocellulose from bemban fibre for cement-based composite

Extraction and characterization of nanocellulose from bemban fibre for cement-based composite

Optimization of nanocellulose extraction from Cocos nucifera leaves

The most common scenario in agriculture and food manufacturing is they utilize the fruit or stem of the plants but discard the leaves by open burning or disposing them into the river which causes water and air pollution. Nanocellulose fabricated from abundant agricultural waste could be one of the alternative solutions to overcome environmental pollution. In this study, nanocellulose was extracted from the dried leaves of Cocos nucifera (Coconut). The process was carried out using formic acid, peroxy formic acid and sodium hypochlorite bleaching. The interaction of three independent variables was studied during the formic acid pulping stage. The optimum condition for the formic acid pulping was set by 85% concentration of formic acid and incubation in the water bath at 70℃ for 1 hr. This study showed a simple and inexpensive method to extract nanocellulose. The products provided insight into the kinetic model of nanocellulose and the potential usages of nanocellulose as substitutes for renewable sources of energy and applications in various fields.

Effect of Sulphuric Acid Concentration on Nanocellulose Extraction from Rice Husk

Effect of Sulphuric Acid Concentration on Nanocellulose Extraction from Rice Husk

High-Value Utilization of Cellulose: Intriguing and Important Effects of Hydrogen Bonding Interactions─A Mini-Review.

Cellulose has been widely used in papermaking, textile, and chemical industries due to its diverse sources, environmental friendliness, and renewability. Recently, much more attention has been paid to converting cellulose into high-value-added products. Therefore, the extraction of nanocellulose, the dissolution of cellulose, and their applications are some of the most important research topics currently. However, cellulose's dense hydrogen bond network poses challenges for efficient extraction and dissolution, limiting its potential for functional material development. This review discusses the mechanisms of hydrogen bond disruption and weak interactions during nanocellulose extraction and cellulose dissolution. Key challenges and future research directions are highlighted, emphasizing developing efficient, ecofriendly, and cost-effective methods. Additionally, this review provides theoretical insights for constructing high-performance cellulose-based materials.

Ultrasonic-assisted extraction of nanocellulose from sweet potato residue and its application in noodles.

Enhancing the amount of dietary fiber without compromising the quality of noodles remains a challenge in the food industry. This study aimed to optimize the ultrasound-assisted extraction parameters to enhance the yield of nanocellulose from sweet potato residue (SPR) using a response surface methodology. The impact of SPR nanocellulose on noodles' physicochemical properties was also explored. Results showed that the optimal extraction conditions for nanocellulose from SPR were identified as 180.73 U/mL cellulase concentration, 4.28 h ultrasonic time, 444.12 W ultrasonic power, and 14.17 h enzymatic hydrolysis time. The max yield of nanocellulose was 15.93% at optimum extraction conditions. Increasing the amount of SPR nanocellulose resulted in a reduction in the optimal cooking time, water absorption, elongation index, and springiness, as well as an increase in the breaking rate, cooking loss, hardness, gumminess, and chewiness of the noodles. Sensory analysis revealed higher acceptability of the noodles with 6%-12% SPR nanocellulose compared to other treatments. Microstructure demonstrated that noodles with 0%-18% SPR nanocellulose exhibited fewer holes and denser network structures, but higher SPR nanocellulose damaged the protein network. Those findings suggested that noodles with less than 12% SPR nanocellulose exhibited higher quality. This research provided the foundation for the development of nanocellulose-enriched foods.

Enhanced nanocellulose extraction from date palm waste: green solvent hydrolysis with transition metal complex

This study presents a novel method for nanocellulose production using [Bmim]Cl as a green solvent, with enhanced hydrolysis efficiency achieved through the addition of a transition metal complex as a catalyst. The redox capability of the transition metal complex to break the glycosidic bonds in cellulose is amplified by the addition of an oxidizing agent. This protocol represents the latest innovation in the field of nanocellulose production, resulting in improved yield and reduced particle size. Nanocellulose (NC) was extracted from date seeds using 1-butyl-3-methylimidazolium chloride [Bmim]Cl coupled with a transition metal complex comprising copper metal and pyridine as a ligand along with H2O2\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${\ ext{H}}_{2}{\ ext{O}}_{2}$$\\end{document} as an oxidizing agent. Unlike conventional [Bmim]Cl hydrolysis, which typically yields only microcrystalline cellulose (MCC), this approach resulted in a 25% higher yield of NC than that of MCC. Dynamic light scattering analysis showed a substantial reduction in hydrodiameter from 1200 nm for MCC to 128.7 nm for NC, highlighting the remarkable efficiency of this process. Thermal analysis demonstrated the high stability of NC, which showed a Tonset\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${T}_{onset}$$\\end{document} of 286 °C and an activation energy (Ea\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${E}_{a}$$\\end{document}) of 220.41 kJ/mol. X-ray diffraction analysis indicated that NC possessed a high degree of crystallinity (Crl=\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${C}_{rl}=$$\\end{document} 70.28%). Furthermore, NC underwent modification with 3-aminopropyltriethoxysilane to replace free hydroxyl groups (–OH), making it redispersal and suitable for various applications. This modification was confirmed through Fourier transform infrared spectroscopy, which showed the presence of characteristic functional groups, and energy-dispersive X-ray spectroscopy, which verified the elemental composition. Zeta potential measurements revealed surface charge differences, with MCC at − 27.87 mV, NC at − 27.28 mV, and modified NC at − 44.72 mV, indicating improved colloidal stability after modification. These findings highlight the protocol's effectiveness and its potential impact on the NC production industry, offering improved yields and the production of nanosized fibers using green solvents.

Guideline for the extraction of nanocellulose from lignocellulosic feedstocks

AbstractNanocellulose, derived from renewable plant sources, has emerged as a popular material due to its excellent properties and versatile applications across diverse industries. This guideline presents a comprehensive operational guideline designed to facilitate the efficient extraction of nanocellulose from lignocellulosic feedstocks. Beginning with a foundational overview of nanocellulose and the types of lignocellulosic feedstocks, this guideline firstly proceeds to discuss the pretreatment process prior to nanocellulose extraction, which mainly involves alkali treatment and bleaching to purify cellulose from lignocellulosic feedstocks. The guideline then delves into various extraction methods for nanocellulose, including mechanical, chemical, and enzymatic methods along with the detailed procedures, highlighting key factors such as method selection, processing conditions, and important considerations to keep in mind. Furthermore, the guideline emphasizes the specific steps for preparing cellulose nanocrystals (CNCs) and cellulose nanofibrils (CNFs). By conducting a systematic review of current research, this guideline may provide helpful insights for researchers and practitioners engaged in nanocellulose production.

Enzymatic extraction and characterization of nanocellulose from cornhusk fiber

Enzymatic extraction and characterization of nanocellulose from cornhusk fiber

Nanocellulose extraction from acai bagasse through mixed acid hydrolysis and oxidative techniques

Exploring new biomass sources for nanocellulose (NC) extraction is crucial in elevating the economic value of readily available renewable resources. This study compares NC extracted from acai (Euterpe oleracea) bagasse using different methods: mixed acid hydrolysis, 2,2,6,6-tetramethylpiperidinyl-1-oxy (TEMPO) mediation, and ammonium persulfate (APS) oxidations. A comprehensive analysis investigates the impact of each treatment on the physical-chemical properties of the nanoparticles, including chemical structure, crystallinity, morphology, and thermal and suspension stability. NCs obtained through mixed acid hydrolysis exhibit the highest crystallinity (62 %) and low sulfate groups on their surfaces. Consequently, they demonstrate excellent thermal stability but poor colloidal stability in water. Oxidized NCs undergo chemical modification, converting alcoholic groups into carboxyl, resulting in NCs with zeta potentials ranging between −25.30 ± 0.81 and − 27.49 ± 1.07 mV. APS oxidation produces nanoparticles with superior thermal stability compared to TEMPO oxidation. Atomic Force Microscopy (AFM) images reveal that all nanocelluloses share characteristics of nanofibers (CNFs). This comprehensive characterization highlights the potential of acai bagasse for yielding high-added-value bioproducts suitable for versatile applications.

Extraction of Nanocellulose from the Residue of Sugarcane Bagasse Fiber for Anti-Staphylococcus aureus (S. aureus) Application.

Nanocellulose contains a large number of hydroxyl groups that can be used to modify its surface due to its structure. Owing to its appealing features, such as high strength, great stiffness, and high surface area, nanocellulose is currently gaining popularity in research and industry. The extraction of nanocellulose from the leftover bagasse fiber from sugarcane production by alkaline and acid treatment was successful in this study, with a production yield of 55.6%. The FTIR and XPS results demonstrated a difference in the functional and chemical composition of untreated sugarcane bagasse and extracted nanocellulose. SEM imaging was used to examined the size of the nanocellulose with ImageJ software v1.8.0. TGA, DTG, and XRD analyses were also performed to demonstrate the successful extraction of nanocellulose in terms of its morphology, thermal stability, and crystal structure before and after extraction. The anti-S. aureus activity of the extracted nanocellulose was discovered by using an OD600 test and a colony counting method, and an inhibitory rate of 53.12% was achieved. According to the results, nanocellulose produced from residual sugarcane bagasse could be employed as an antibacterial agent.

Biowaste Valorization of Palm Tree Phoenix dactylifera L. for Nanocellulose Production.

The desire to reduce reliance on oil resources arises from the concerns about carbon footprint and nonrenewability. Conversely, the global presence of over 100 million palm trees poses a significant challenge due to the substantial amount of biowaste generated annually. Additionally, the use of nanocellulose (NC) as a cost-effective material is steadily gaining recognition for its growing adaptability over time. The main goal of this study is to biosynthesized NC from Iraqi date palm Phoenix dactylifera leaves waste with low-concentration acid-alkali treatment. The date palm leaves waste yields 20 g of NC from 100 g of leaves before acid hydrolysis treatment. The chemical components of biosynthesized NC were 47.90%, 26.78%, and 24.67% for α-cellulose, hemicellulose, and lignin, respectively. In order to study their properties, NC from raw date palm leaves was studied by microscopic techniques such as scanning electron microscopy (SEM), energy dispersive X-ray (EDX) spectroscopy, and atomic force microscope (AFM). SEM results revealed rod-like structured NC as well as combined long-fine fibrous structures rather than compacted bundles with sizes ranging between 31 and 74 nm. With EDX, all spectra exhibit the peaks of carbon and oxygen as the main elements with 63.8% and 10.44%, respectively, in their compositions, which relate to the typical composition of cellulose. The 3D image of AFM NC with a tapping mode presented a highly uniform distribution of NC with a size of ∼15 nm. The statistical roughness analysis shows that the obtained roughness average is 7.20 nm with the root-mean-square roughness value of 21.56 nm, which corresponded relatively with the micrographs of SEM. The results of this study demonstrate the promise of using date palm waste as raw material to produce NC as green nanocomposite from biodegradable nanomaterials for water purification and sustained drug delivery for biomedical applications. In this regard and because of the insufficient reports about the extraction of NC from palm tree leaves waste, the objective of this study was designed to fabricate NC biologically from fibers sourced from the waste of Iraqi date palm P. dactylifera leaves that left in agricultural lands or burned, which can be an ecological and health problem as a bionanocomposites in the medical and industrial field and as alternative resources of wood materials.

One-pot extraction of nanocellulose from raw durian husk fiber using carboxylic acid-based deep eutectic solvent with in situ ultrasound assistance

Nanocellulose (CNF) has emerged as a promising alternative to synthetic petroleum-based polymers, but the conventional preparation process involves multiple tedious steps, heavily dependent on chemical input, and proves cost-inefficient. This study presented an, in situ ultrasound-assisted extraction using deep eutectic solvent (DES) based on choline chloride and oxalic acid for more facile production of CNF from raw durian husk fibers. FESEM analysis confirmed the successful extraction of web-like nanofibril structure with width size ranging from 18 to 26 nm. Chemical composition analysis and FTIR revealed the selective removal of lignin and hemicellulose from the raw fiber. As compared to post-ultrasound treatment, in situ ultrasound-assisted extraction consistently outperforms, yielding a higher CNF yield with finer fiber width and significantly reduced lignin content. Integrating this eco-friendly in situ ultrasonication-assisted one-pot extraction method with a 7.5 min interval yielded the highest CNF yield of 58.22 % with minimal lignin content. The superior delignification ability achieved through the proposed in situ ultrasound-assisted protocol surpasses the individual efficacy of DES and ultrasonication processes, neither of which yielded CNF in our experimental setup. This single-step fabrication process significantly reduces chemical usage and streamlines the production steps yielding web-structured CNF that is ideal for sustainable application in membrane and separator.

Nanocellulose: A sustainable functional construct for the remediation of heavy metal ions from water

Heavy metals are considered to be a significant pollutant in water bodies, adversely affecting human health by causing various severe diseases after passing down the food chain. The rise in environmental problems due to the usage of non – biodegradable materials leads to the necessity of eco–friendly materials. The abundant and eco-friendly nature of the nanocellulose makes them promising substitutes for non-sustainable materials, nowadays. It is also possible to find the chemical components (cellulose, hemicellulose, and lignin) present in a source and the cellulose yield. In this context, nanocellulose has gained considerable attention among nanomaterials as a promising candidate for the adsorption of toxic heavy metal ions because of its large surface area, light weight, low cost, biocompatible nature, etc. Moreover, the numerous surface hydroxyl groups present in its surface make them suitable for the wide range of surface functionalization with different groups. They can thus be used individually or in combination with other materials for excellent adsorption towards various toxic heavy metal ions. The state of research on modified nanocellulose as an adsorbent for heavy metals is principally discussed in this review. Mainly two types of plant-based nanocelluloses; cellulose nanofibers (CNFs) and cellulose nanocrystals (CNCs), are discussed in detail in this review. The extraction of nanocellulose via a green approach was also covered. This review comprises comprehensive details on the modifications and other relevant properties of nanocellulose which would facilitate the adsorption of toxic heavy metals.

Extraction and characterization of nanocellulose from waste of date palm "Phoenix dactylifera″ as reinforcement of polymer composites.

The cellulose is the most abundant and renewable polymer in nature. It is characterized by its biodegradability that can help to establish a friendly environment. The main objective of this study is intended to characterize the nanocellulose obtained from waste date palm, including the dried palms (DP) and the fresh palms (FP) by implementing chemical methods (hydrolysis with H2SO4). Physical properties, morphology, the elemental composition and the thermal stability were determined by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), zeta sizer, scanning electron microscopy (SEM), whereas energy dispersive X-ray (EDX) and thermogravimetric analysis (TGA), respectively. FTIR, SEM and EDX results, revealed the effective removal of impurities, hemicellulose and lignin. Palm sample residues contained 35.99% of cellulose and 33.12% of cellulose nanocrystals (CNC) for DP, and 36.17% of cellulose and 34.35% of CNC for FP. The CNCs have higher crystallinity than the raw fibers and Zeta sizer was between 25 and 1150 nm. TGA analysis showedthat DP exhibited greater thermal resistance.

Synthesis and characterization of cellulose nanofibers from waste paper and their utilization in wood adhesion

AbstractNanocellulose extraction from lignocellulosic materials is a highly chemical and energy‐intensive process as it requires the removal of lignin and hemicellulose. Writing paper is one of the processed materials that could be used as a raw material for the extraction of nanocellulose. In this work, cellulose nanofibers (CNFs) were synthesized from paper waste using TEMPO‐oxidation followed by high‐shear microfluidization. Scanning electron microscopy and atomic force microscopy confirmed the diameter of fibers in the nano‐range and a consistent zeta potential confirmed the stability of CNF suspension in water over a long time frame. Characterization of the CNFs using Fourier transform infrared spectroscopy indicated the presence of a carbonyl group due to the oxidation process. Thermogravimetric analysis and x‐ray diffraction revealed lower thermal stability and reduction in the crystallinity index of CNFs, as compared to pulp fibers. The obtained CNFs were used successfully as the sole binding agent in the preparation of fiberboards and also utilized as a reinforcing agent for polyvinyl acetate (PVAc) adhesive in the preparation of laminated veneer lumber (LVLs). The addition of CNFs in PVAc improved the glue shear strength indicating superior bonding characteristics and also increased the water resistance of the LVLs.Highlights This work focused on cellulose nanofibers (CNFs) extraction from waste paper Obtained CNFs form stable water suspension and have a diameter of less than 15 nm Thermal stability and crystallinity index reduced after conversion to nanofibers CNFs form a complex network and act as a sole binder to make fiberboards CNFs were utilized as a reinforcing agent for PVAc in preparation of LVLs

Cellulose Nanostructures as Tunable Substrates for Nanocellulose-Metal Hybrid Flexible Composites.

Nanocomposite represents the backbone of many industrial fabrication applications and exerts a substantial social impact. Among these composites, metal nanostructures are often employed as the active constituents, thanks to their various chemical and physical properties, which offer the ability to tune the application scenarios in thermal management, energy storage, and biostable materials, respectively. Nanocellulose, as an emerging polymer substrate, possesses unique properties of abundance, mechanical flexibility, environmental friendliness, and biocompatibility. Based on the combination of flexible nanocellulose with specific metal fillers, the essential parameters involving mechanical strength, flexibility, anisotropic thermal resistance, and conductivity can be enhanced. Nowadays, the approach has found extensive applications in thermal management, energy storage, biostable electronic materials, and piezoelectric devices. Therefore, it is essential to thoroughly correlate cellulose nanocomposites' properties with different metallic fillers. This review summarizes the extraction of nanocellulose and preparation of metal modified cellulose nanocomposites, including their wide and particular applications in modern advanced devices. Moreover, we also discuss the challenges in the synthesis, the emerging designs, and unique structures, promising directions for future research. We wish this review can give a valuable overview of the unique combination and inspire the research directions of the multifunctional nanocomposites using proper cellulose and metallic fillers.

Utilizing industrial byproducts for the manufacture of clay-cellulose nanocomposite cements with enhanced sustainability

This study investigates the influence of different nano clay contents (0, 1, 3, and 5 wt% of cement) on the microstructure and the mechanical properties of cement composites reinforced with varying Nano cellulose fiber contents (0, 0.5, 0.75, and 1 wt% of cement). Unlike previous research that employed sonication to improve dispersion in the cement matrix, this study explores the effects of unsonicated nano-cellulose addition and the combined incorporation of nano-cellulose and nano-clay. The results demonstrate that these additions significantly enhance the compressive strength, abrasion resistance, and water absorption ratios of the cement composites. Furthermore, the inclusion of nano-clay improves the microstructure of the cement matrix, strengthening the interfacial transition zone and reinforcing the bond between nano-cellulose and the cement matrix. The microstructural analysis using scanning electron microscopy (SEM) reveals the presence of a dense interconnected structure characterized by rod-like crystals. This research contributes to the development of sustainable construction materials by examining the effects of nano-cellulose and nano-clay on the properties and microstructure of cement composites. The utilization of industrial byproducts, such as wood sawdust, for the extraction of nano-cellulose offers an eco-friendly approach to enhance the performance of cement-based materials. The maximum compressive strength obtained, after 28 days, was at mix with 0.75% NCL + 5%NC with a gain of 53.5% than that of the control mix. In mixes containing only nano-clay (NCL), the increase in NCL content led to a higher rate of water absorption in the cement matrix, which reaches 4%. Confirming the results obtained from compressive strength and water absorption, mix with 0.75% NCL and 5% NC had obtained the optimum values with an improvement of 20% than that of the control mix.

Transforming textile waste into nanocellulose for a circular future.

The expansion of the textile industry and improvements in living standards have led to increased cotton textile production, resulting in a rise in textile waste, with cotton accounting for 24% of total textile waste. Effective waste management through recycling and reuse is crucial to reducing global waste production. Nanocellulose has diverse applications in environmental, geotechnical, food packaging, and biomedical engineering areas. As interest in nanocellulose's unique properties grows, cotton-based textile waste emerges as a promising source for nanocellulose development. However, there is a notable lack of comprehensive reviews on the extraction of nanocellulose from textile waste as a sustainable biomaterial. This paper aims to address this gap by exploring current extraction processes, properties, and recent applications of nanocellulose derived from textile waste. We discussed (1) the potential of nanocellulose resources from different textile wastes, (2) a comparison of the various extraction methods, (3) the functionalization technology and the potential application of such nanocellulose in the textile industry, and (4) the life cycle assessment (LCA) and potential gap of the current technology. It also emphasizes the potential reintegration of extracted nanocellulose into the textile industry to manufacture high-value products, thus completing the loop and strengthening the circular economy.