N-terminal Module Research Articles

English

Phytochrome belongs to red/far-red light family of photoreceptors. It exists in two spectral forms named red light absorbing form (Pr), said to be the inactive form and far-red light absorbing form (Pfr) which is the active form. This photoreceptor is structurally divided into two modules- the amino acid (N-) terminal photosensory module and caboxylic acid (C-) terminal His kinase-like catalytic output module. Five different types exist in Arabidopsis (PhyA-E). Roots and hypocotyls elongation in Arabidopsis is regulated by photoreceptors one class of which is phytochrome. The role of phytochrome B (PhyB) in red light responses has been established through studies using PhyB mutant and truncated versions. N-terminal module of PhyB containing 651 amino acids was shown to be biologically active in regulating photomorphogenesis. Meanwhile, the C-terminal module was long assumed to be involved in downstream signal transduction. Recently, this module was suggested to play a role in integrating red and blue light signaling to circadian clock. Here, the study shows that the C-terminal module of PhyB is needed for root growth and strongly modulates the root to hypocotyl ratio at 22°C. At an elevated temperature (34°C), this ratio was altered suggesting a role of this module in temperature signaling during plant growth.   Key words: Phytochrome, red/far-red, Roots, hypocotyls.

Structure, mechanism, and phylogeny of LysM-chitinase conjugates specifically found in fern plants

A unique GH18 chitinase containing two N-terminal lysin motifs (PrLysM1 and PrLysM2) was first found in fern, Pteris ryukyuensis (Onaga and Taira, Glycobiology, 18, 414–423, 2008). This type of LysM-chitinase conjugates is not usually found in plants but in fungi. Here, we produced a similar GH18 chitinase with one N-terminal LysM module (EaLysM) from the fern, Equisetum arvense (EaChiA, Inamine et al., Biosci. Biotechnol. Biochem., 79, 1296–1304, 2015), using an Escherichia coli expression system and characterized for its structure and mechanism of action. The crystal structure of EaLysM exhibited an almost identical fold (βααβ) to that of PrLysM2. From isothermal titration calorimetry and nuclear magnetic resonance, the binding mode and affinities of EaLysM for chitooligosaccharides (GlcNAc)n (3, 4, 5, and 6) were found to be comparable to those of PrLysM2. The LysM module in EaChiA is likely to bind (GlcNAc)n almost independently through CH-π stacking of a Tyr residue with the pyranose ring. The (GlcNAc)n-binding mode of LysMs in the LysM-chitinase conjugates from fern plants appears to differ from that of plant LysMs acting in chitin- or Nod-signal perception, in which multiple LysMs cooperatively act on (GlcNAc)n. Phylogenetic analysis suggested that LysM-GH18 conjugates of fern plants formed a monophyletic group and had been separated earlier than forming the clade of fungal chitinases with LysMs.

The soluble N-terminal autoinhibitory module of the A1 domain in von Willebrand factor partially suppresses its catch bond with glycoprotein Ibα in a sandwich complex.

von Willebrand factor (VWF) senses and responds to the hemodynamic forces to interact with the circulatory system and platelets in hemostasis and thrombosis. The dark side of this mechanobiology is implicated in atherothrombosis, stroke, and, more recently, the COVID-19 thrombotic symptoms. The force-responsive element controlling VWF activation predominantly resides in the N terminal auto-inhibitory module (N-AIM) flanking its A1 domain. Nevertheless, the detailed mechano-chemistry of soluble VWF N-AIM is poorly understood at the sub-molecular level as it is assumed to be unstructured loops. Using the free molecular dynamics (MD) simulations, we first predicted a hairpin-like structure of the soluble A1 N-AIM derived polypeptide (Lp; sequences Q1238-E1260). Then we combined molecular docking and steered molecular dynamics (SMD) simulations to examine how Lp regulates the A1-GPIbα interaction under tensile forces. Our simulation results indicate that Lp suppresses the catch bond in a sandwich complex of A1-Lp-GPIbα yet contributes an additional catch-bond residue D1249. To experimentally benchmark the binding kinetics for A1-GPIbα in the absence or presence of Lp, we conducted the force spectroscopy-biomembrane force probe (BFP) assays. We found similar suppression on the A1-GPIbα catch bond with soluble Lp in presence. Clinically, as more and more therapeutic candidates targeting the A1-GPIbα axis have entered clinical trials to treat patients with TTP and acute coronary syndrome, our work represents an endeavor further towards an effective anti-thrombotic approach without severe bleeding side effects as most existing drugs suffer.

Evolutionary conservation of protein dynamics: insights from all-atom molecular dynamics simulations of ‘peptidase’ domain of Spt16

Protein function is encoded in its sequence, manifested in its three-dimensional structure, and facilitated by its dynamics. Studies have suggested that protein structures with higher sequence similarity could have more similar patterns of dynamics. However, such studies of protein dynamics within and across protein families typically rely on coarse-grained models, or approximate metrics like crystallographic B-factors. This study uses µs scale molecular dynamics (MD) simulations to explore the conservation of dynamics among homologs of ∼50 kDa N-terminal module of Spt16 (Spt16N). Spt16N from Saccharomyces cerevisiae (Sc-Spt16N) and three of its homologs with 30–40% sequence identities were available in the PDB. To make our data-set more comprehensive, the crystal structure of an additional homolog (62% sequence identity with Sc-Spt16N) was solved at 1.7 Å resolution. Cumulative MD simulations of 6 µs were carried out on these Spt16N structures and on two additional protein structures with varying degrees of similarity to it. The simulations revealed that correlation in patterns of backbone fluctuations vary linearly with sequence identity. This trend could not be inferred using crystallographic B-factors. Further, normal mode analysis suggested a similar pattern of inter-domain (inter-lobe) motions not only among Spt16N homologs, but also in the M24 peptidase structure. On the other hand, MD simulation results highlighted conserved motions that were found unique for Spt16N protein, this along with electrostatics trends shed light on functional aspects of Spt16N. Communicated by Ramaswamy H. Sarma.

Improved RAD51 binders through motif shuffling based on the modularity of BRC repeats

Exchanges of protein sequence modules support leaps in function unavailable through point mutations during evolution. Here we study the role of the two RAD51-interacting modules within the eight binding BRC repeats of BRCA2. We created 64 chimeric repeats by shuffling these modules and measured their binding to RAD51. We found that certain shuffled module combinations were stronger binders than any of the module combinations in the natural repeats. Surprisingly, the contribution from the two modules was poorly correlated with affinities of natural repeats, with a weak BRC8 repeat containing the most effective N-terminal module. The binding of the strongest chimera, BRC8-2, to RAD51 was improved by -2.4 kCal/mol compared to the strongest natural repeat, BRC4. A crystal structure of RAD51:BRC8-2 complex shows an improved interface fit and an extended β-hairpin in this repeat. BRC8-2 was shown to function in human cells, preventing the formation of nuclear RAD51 foci after ionizing radiation.

Direct photoresponsive inhibition of a p53-like transcription activation domain in PIF3 by Arabidopsis phytochrome B

Photoactivated phytochrome B (PHYB) binds to antagonistically acting PHYTOCHROME-INTERACTING transcription FACTORs (PIFs) to regulate hundreds of light responsive genes in Arabidopsis by promoting PIF degradation. However, whether PHYB directly controls the transactivation activity of PIFs remains ambiguous. Here we show that the prototypic PIF, PIF3, possesses a p53-like transcription activation domain (AD) consisting of a hydrophobic activator motif flanked by acidic residues. A PIF3mAD mutant, in which the activator motif is replaced with alanines, fails to activate PIF3 target genes in Arabidopsis, validating the functions of the PIF3 AD in vivo. Intriguingly, the N-terminal photosensory module of PHYB binds immediately adjacent to the PIF3 AD to repress PIF3’s transactivation activity, demonstrating a novel PHYB signaling mechanism through direct interference of the transactivation activity of PIF3. Our findings indicate that PHYB, likely also PHYA, controls the stability and activity of PIFs via structurally separable dual signaling mechanisms.

Relaxin family peptide receptors in GtoPdb v.2021.3

Relaxin family peptide receptors (RXFP, nomenclature as agreed by the NC-IUPHAR Subcommittee on Relaxin family peptide receptors [18, 81]) may be divided into two pairs, RXFP1/2 and RXFP3/4. Endogenous agonists at these receptors are heterodimeric peptide hormones structurally related to insulin: relaxin-1, relaxin, relaxin-3 (also known as INSL7), insulin-like peptide 3 (INSL3) and INSL5. Species homologues of relaxin have distinct pharmacology and relaxin interacts with RXFP1, RXFP2 and RXFP3, whereas mouse and rat relaxin selectively bind to and activate RXFP1 [184]. relaxin-3 is the ligand for RXFP3 but it also binds to RXFP1 and RXFP4 and has differential affinity for RXFP2 between species [183]. INSL5 is the ligand for RXFP4 but is a weak antagonist of RXFP3. relaxin and INSL3 have multiple complex binding interactions with RXFP1 [189] and RXFP2 [91] which direct the N-terminal LDLa modules of the receptors together with a linker domain to act as a tethered ligand to direct receptor signaling [186]. INSL5 and relaxin-3 interact with their receptors using distinct residues in their B-chains for binding, and activation, respectively [225, 104].

Structural Insights into the Unique Modes of Relaxin-Binding and Tethered-Agonist Mediated Activation of RXFP1 and RXFP2

Our poor understanding of the mechanism by which the peptide-hormone H2 relaxin activates its G protein coupled receptor, RXFP1 and the related receptor RXFP2, has hindered progress in its therapeutic development. Both receptors possess large ectodomains, which bind H2 relaxin, and contain an N-terminal LDLa module that is essential for receptor signaling and postulated to be a tethered agonist. Here, we show that a conserved motif (GDxxGWxxxF), C-terminal to the LDLa module, is critical for receptor activity. Importantly, this motif adopts different structures in RXFP1 and RXFP2, suggesting distinct activation mechanisms. For RXFP1, the motif is flexible, weakly associates with the LDLa module, and requires H2 relaxin binding to stabilize an active conformation. Conversely, the GDxxGWxxxF motif in RXFP2 is more closely associated with the LDLa module, forming an essential binding interface for H2 relaxin. These differences in the activation mechanism will aid drug development targeting these receptors.

A trimodular family 16 glycoside hydrolase from the cellulosome of Ruminococcus flavefaciens displays highly specific licheninase (EC 3.2.1.73) activity

Cellulosomes are highly complex cell-bound multi-enzymatic nanomachines used by anaerobes to break down plant carbohydrates. The genome sequence of Ruminococcus flavefaciens revealed a remarkably diverse cellulosome composed of more than 200 cellulosomal enzymes. Here we provide a detailed biochemical characterization of a highly elaborate R. flavefaciens cellulosomal enzyme containing an N-terminal dockerin module, which anchors the enzyme into the multi-enzyme complex through binding of cohesins located in non-catalytic cell-bound scaffoldins, and three tandemly repeated family 16 glycoside hydrolase (GH16) catalytic domains. The DNA sequence encoding the three homologous catalytic domains was cloned and hyper-expressed in Escherichia coli BL21 (DE3) cells. SDS-PAGE analysis of purified His6 tag containing RfGH16_21 showed a single soluble protein of molecular size ~89 kDa, which was in agreement with the theoretical size, 89.3 kDa. The enzyme RfGH16_21 exhibited activity over a wide pH range (pH 5.0–8.0) and a broad temperature range (50–70 °C), displaying maximum activity at an optimum pH of 7.0 and optimum temperature of 55 °C. Substrate specificity analysis of RfGH16_21 revealed maximum activity against barley β-d-glucan (257 U mg−1) followed by lichenan (247 U mg−1), but did not show significant activity towards other tested polysaccharides, suggesting that it is specifically a β-1,3-1,4-endoglucanase. TLC analysis revealed that RfGH16_21 hydrolyses barley β-d-glucan to cellotriose, cellotetraose and a higher degree of polymerization of gluco-oligosaccharides indicating an endo-acting catalytic mechanism. This study revealed a fairly high, active and thermostable bacterial endo-glucanase which may find considerable biotechnological potentials.

Blockade of checkpoint ILT3/LILRB4/gp49B binding to fibronectin ameliorates autoimmune disease in BXSB/Yaa mice.

The extracellular matrix (ECM) is the basis for virtually all cellular processes and is also related to tumor metastasis. Fibronectin (FN), a major ECM macromolecule expressed by different cell types and also present in plasma, consists of multiple functional modules that bind to ECM-associated, plasma, and cell-surface proteins such as integrins and FN itself, thus ensuring its cell-adhesive and modulatory role. Here we show that FN constitutes an immune checkpoint. Thus, FN was identified as a physiological ligand for a tumor/leukemia/lymphoma- as well as autoimmune-associated checkpoint, ILT3/LILRB4 (B4, CD85k). Human B4 and the murine ortholog, gp49B, bound FN with sub-micromolar affinities as assessed by bio-layer interferometry. The major B4-binding site in FN was located at the N-terminal 30-kDa module (FN30), which is apart from the major integrin-binding site present at the middle of the molecule. Blockade of B4-FN binding such as with B4 antibodies or a recombinant FN30-Fc fusion protein paradoxically ameliorated autoimmune disease in lupus-prone BXSB/Yaa mice. The unexpected nature of the B4-FN checkpoint in autoimmunity is discussed, referring to its potential role in tumor immunity.

CDNA cloning, expression, and antifungal activity of chitinase from Ficus microcarpa latex: difference in antifungal action of chitinase with and without chitin-binding domain.

A chitin-binding domain could contribute to the antifungal ability of chitinase through its affinity to the fungal lateral wall by hydrophobic interactions. Complementary DNA encoding the antifungal chitinase of gazyumaru (Ficus microcarpa), designated GlxChiB, was cloned and expressed in Escherichia coli cells. The results of cDNA cloning showed that the precursor of GlxChiB has an N-terminal endoplasmic reticulum targeting signal and C-terminal vacuolar targeting signal, whereas mature GlxChiB is composed of an N-terminal carbohydrate-binding module family-18 domain (CBM18) and a C-terminal glycoside hydrolase family-19 domain (GH19) with a short linker. To clarify the role of the CBM18 domain in the antifungal activity of chitinase, the recombinant GlxChiB (wild type) and its catalytic domain (CatD) were used in quantitative antifungal assays under different ionic strengths and microscopic observations against the fungus Trichoderma viride. The antifungal activity of the wild type was stronger than that of CatD under all ionic strength conditions used in this assay; however, the antifungal activity of CatD became weaker with increasing ionic strength, whereas that of the wild type was maintained. The results at high ionic strength further verified the contribution of the CBM18 domain to the antifungal ability of GlxChiB. The microscopic observations clearly showed that the wild type acted on both the tips and the lateral wall of fungal hyphae, while CatD acted only on the tips. These results suggest that the CBM18 domain could contribute to the antifungal ability of chitinase through its affinity to the fungal lateral wall by hydrophobic interactions.

Blockade of checkpoint ILT3/LILRB4/gp49B binding to fibronectin ameliorates autoimmune disease in BXSB/Yaa mice

Abstract Extracellular matrix (ECM) not only provides a supporting framework for each tissue, but also elicits cellular responses by providing an inductive substrate. Fibronectin (FN), a major ECM macromolecule, is composed of multiple modules that interact with ECM-associated proteins, plasma proteins, and cell-surface proteins to ensure its modulatory roles. Here we revealed that FN is identified as a physiological ligand of the immunoglobulin (Ig)-like transcript 3/leukocyte Ig-like receptor B4 (ILT3/LILRB4) which serves as an immune checkpoint for autoimmune and cancer diseases. Human LILRB4 and the murine ortholog, gp49B, bound FN with sub-micromolar affinities as assessed by bio-layer interferometry. The major LILRB4-binding site in FN was located at the N-terminal 30-kDa module (FN30). Blockade of B4–FN binding with gp49 antibody or a recombinant FN30-Fc fusion protein reduced the secretion of pathogenic IgG autoantibodies, thereby reducing PAS-positive glomerular deposition in lupus-prone BXSB/Yaa mice. Compared with the control group, activation-induced cytidine deaminase (AID) expression in splenic activated B cells of FN30-Fc-treated BXSB/Yaa mice was decreased, indicating gp49B-FN30 signaling contributes in the class switch recombination (CSR) of Ig genes. These results suggested that gp49B–FN interplay is critical for pathogenic autoantibodies-mediated glomerulonephritis in the BXSB/Yaa lupus mouse model.

Cellulophaga algicola alginate lyase inhibits biofilm formation of a clinical Pseudomonas aeruginosa strain MCC 2081.

Alginate lyases are potential agents for disrupting alginate-rich Pseudomonas biofilms in the infected lungs of cystic fibrosis patients but there is as yet no clinically approved alginate lyase that can be used as a therapeutic. We report here the endolytic alginate lyase activity of a recombinant Cellulophaga algicola alginate lyase domain (CaAly) encoded by a gene that also codes for an N-terminal carbohydrate-binding module, CBM6, and a central F-type lectin domain (CaFLD). CaAly degraded both polyM and polyG alginates with optimal temperature and pH of 37°C and pH 7, respectively, with greater preference for polyG. Recombinant CaFLD bound to fucosylated glycans with a preference for H-type 2 glycan motif, and did not have any apparent effect on the enzyme activity of the co-associated alginate lyase domain in the recombinant protein construct, CaFLD_Aly. We assessed the potential of CaAly and other alginate lyases previously reported in published literature to inhibit biofilm formation by a clinical strain, Pseudomonas aeruginosa MCC 2081. Of all the alginate lyases tested, CaAly displayed most inhibition of in vitro biofilm formation on plastic surfaces. We also assessed its inhibitory ability against P. aeruginosa 2081 biofilms formed over a monolayer of A549 lung epithelial cells. Our study indicated that CaAly is efficacious in inhibition of biofilm formation even on A549 lung epithelial cell line monolayers.

Structure of the polymerase \u03b5 holoenzyme and atomic model of the leading strand replisome

The eukaryotic leading strand DNA polymerase (Pol) ε contains 4 subunits, Pol2, Dpb2, Dpb3 and Dpb4. Pol2 is a fusion of two B-family Pols; the N-terminal Pol module is catalytic and the C-terminal Pol module is non-catalytic. Despite extensive efforts, there is no atomic structure for Pol ε holoenzyme, critical to understanding how DNA synthesis is coordinated with unwinding and the DNA path through the CMG helicase-Pol ε-PCNA clamp. We show here a 3.5-Å cryo-EM structure of yeast Pol ε revealing that the Dpb3–Dpb4 subunits bridge the two DNA Pol modules of Pol2, holding them rigid. This information enabled an atomic model of the leading strand replisome. Interestingly, the model suggests that an OB fold in Dbp2 directs leading ssDNA from CMG to the Pol ε active site. These results complete the DNA path from entry of parental DNA into CMG to exit of daughter DNA from PCNA.

Bacterial production of maize and human serine racemases as partially active inclusion bodies for d-serine synthesis

Recombinant protein overexpressed in Escherichia coli is often less folded, leading to form the insoluble aggregates also called as inclusion bodies (IBs). IBs are classified as active and inactive ones, and enzyme produced as active IBs is the novel carrier-free immobilized material. In this study, we determined that His6-tagged serine racemase (SR) from maize or human produced as partially active IBs maintained the activities for reversible racemization of l-serine to d-serine but lost the activities for irreversible β-elimination of both enantiomers, in contrast to the soluble one displaying all activities. Fourier transform infrared spectroscopy analysis showed structural changes between the soluble and insoluble SR. Compared with the soluble SR with attachment of the N-terminal cellulose-binding module via the oriented immobilization of the regenerated amorphous cellulose, the insoluble SR with the fusion of the N-terminal aggregation-inducible tag GFIL8 displayed higher production and usage efficiency, lower leaky capacity, more stability at 4 °C storage with the prolonged time, less sensitivity to the limited proteolysis mediated by trypsin, and higher yield of the synthesized d-serine. These advantages allow the SRs as partially active IBs to synthesize d-serine for medical and agricultural applications.

Evaluation of the potential of chimeric spidroins/poly(L-lactic-co-ε-caprolactone) (PLCL) nanofibrous scaffolds for tissue engineering.

In this study, a novel type of chimeric spider silk proteins (spidroins) NTW1-4CT was blended with poly(L-lactic-co-ε-caprolactone) (PLCL) to obtain nanofibrous scaffolds via electrospinning. Spidroins are composed of a N-terminal module (NT) from major ampullate spidroins, a C-terminal module (CT) from minor ampullate spidroins and 1-4 repeat modules (W) from aciniform spidroins. Physical characteristics and structures of NTW1-4CT/PLCL (25/75, w/w) blend scaffolds were carried out by scanning electron microscope (SEM), water contact angles measurements, Fourier transform infrared (FTIR) spectroscopy and tensile mechanical tests. Results showed that blending with spidroins decreased diameters of nanofibers and increased porosity and wettability of scaffolds. Additionally, chimeric spidroins undergone a similar structural transition in electrospinning process as with the formation process of native and artificial spider silks from other spidroins. With amounts of W modules increasing, the tensile strength and elongation of blend scaffolds were also increased. Particularly, NTW4CT/PLCL (25/75) scaffolds revealed much higher breaking stress than pure PLCL scaffolds. In vitro experiments, human umbilical vein endothelial cells (HUVEC) cultured on NTW4CT/PLCL (25/75) scaffolds displayed significantly higher activity of proliferation and adhesion than on pure PLCL scaffolds. All results suggested that chimeric spidroins/PLCL, especially NTW4CT/PLCL (25/75) blend nanofibrous scaffolds had promising potential for vascular tissue engineering.

New Recombinant Carriers Binding Specifically to the Epidermal Growth Factor Receptor.

New recombinant carriers-modular nanotransporters (MNTs)-with N-terminal ligand module to the epidermal growth factor receptor (EGFR) were developed and characterized. Human epidermal growth factor (hEGF) and antibody-like protein Z1907 were used as a ligand module. We demonstrated that MNTs are able to internalize in a receptor-specific manner into the target cancer cells and to accumulate in the target cell nuclei. Conjugation of MNTs with the Auger electron emitter 111In significantly enhanced the cytotoxic effect of 111In on the target cells. It was found that the transfer of EGF from the C-terminus to the N-terminus of the MNT enhanced the proliferation of target cells, whereas the use of Z1907 did not have a similar effect.

Small angle X-ray scattering based structure, modeling and molecular dynamics analyses of family 43 glycoside hydrolase α-L-arabinofuranosidase from Clostridium thermocellum

Enzymes that participate in the hydrolysis of complex carbohydrates display a modular architecture, although the significance of enzyme modularity to flexibility and catalytic efficacy is not fully understood. α-L-arabinofuranosidase from Clostridium thermocellum (CtAraf43) catalyzes the release of α-1,2-, α-1,3-, or α-1,5- linked L-arabinose from arabinose decorated polysaccharides. CtAraf43 comprises an N-terminal catalytic domain (CtAbf43A) connected with two family 6 carbohydrate-binding modules (CBMs), termed as CtCBM6A and CtCBM6B, through flexible linker peptides. Here, we modeled the structure of CtAraf43 revealing that the module, CtAbf43A displays a 5-fold β-propeller fold and the CBMs the typical jellyroll type β-sandwich folds. Ramachandran plot showed 98.5% residues in the favored region and 1.5% residues in the disallowed region. Molecular dynamics simulation analysis of CtAraf43 revealed significant flexibility that is more expressive in the C-terminal CtCBM6B module in terms of structure and orientation. Small angle X-ray scattering analysis of CtAraf43 revealed its elongated structure. CtAraf43 at 1.2 mg/mL demonstrated the monomeric nature and a multi-modular shaped molecular envelope in solution with a Dmax of 12 nm. However, at 4.7 mg/mL, CtAraf43 displayed a dimeric structure and elongated molecular envelope. Kratky plot analysis revealed the folded state of CtAraf43 with limited flexibility at both concentrations. The data revealed higher flexibility at the C-terminal of CtAraf43 suggesting a coordinated action of the N-terminal catalytic module CtAbf43A and the internal CtCBM6A.AbbreviationCBMsCarbohydrate Binding ModulesCtAraf43α-L-arabinofuranosidaseGHsGlycoside HydrolasesMDMolecular DynamicsRMSDRoot Mean Square DeviationRMSFRoot Mean Square FluctuationSAXSSmall angle X-ray scatteringCommunicated by Ramaswamy H. Sarma

Formyltetrahydrofolate Decarbonylase Synthesizes the Active Site CO Ligand of O2-Tolerant [NiFe] Hydrogenase.

[NiFe] hydrogenases catalyze the reversible oxidation of molecular hydrogen into two protons and two electrons. A key organometallic chemistry feature of the NiFe active site is that the iron atom is co-coordinated by two cyanides (CN-) and one carbon monoxide (CO) ligand. Biosynthesis of the NiFe(CN)2(CO) cofactor requires the activity of at least six maturation proteins, designated HypA-F. An additional maturase, HypX, is required for CO ligand synthesis under aerobic conditions, and preliminary in vivo data indicated that HypX releases CO using N10-formyltetrahydrofolate (N10-formyl-THF) as the substrate. HypX has a bipartite structure composed of an N-terminal module similar to N10-formyl-THF transferases and a C-terminal module homologous to enoyl-CoA hydratases/isomerases. This composition suggested that CO production takes place in two consecutive reactions. Here, we present in vitro evidence that purified HypX first transfers the formyl group of N10-formyl-THF to produce formyl-coenzyme A (formyl-CoA) as a central reaction intermediate. In a second step, formyl-CoA is decarbonylated, resulting in free CoA and carbon monoxide. Purified HypX proved to be metal-free, which makes it a unique catalyst among the group of CO-releasing enzymes.

NMR chemical shift assignment of a constitutively active fragment of the antitermination protein LicT.

LicT belongs to an essential family of bacterial antitermination proteins which bind to nascent mRNAs in order to stimulate transcription of sugar-metabolizing operons. As most of other antitermination proteins involved in carbohydrate metabolism, LicT is composed of a N-terminal RNA-binding module (CAT) and two homologous regulatory modules (PRD1 and PRD2). The activity of the CAT effector module is controlled by antagonist phosphorylations by the phosphotransferase system on conserved histidines of the two C-terminal PRDs in response to available carbon sources. Previous studies on truncated and mutant constructs have provided partial structural insight into the mechanism of signal transduction between the N-terminal RNA-binding domain and the two regulation modules. However, no structure at atomic resolution has been ever solved that contain the RNA-binding domain and a regulation module. We report the NMR assignment of a constitutively active fragment of LicT, named D99A-CAT-PRD1 or CAT-PRD1*. This fragment is composed of the RNA-binding module and the first N-terminal regulation module which bears the mutation of Asp99 to an asparagine. Itis dimeric as the native protein, with a 40 kD molecular weight. The D99N mutation is sufficient to endow this fragment with a high RNA-binding constitutive activity, in a phosphorylation-free context. The assignment reported here should set the base of future NMR investigation of signal transduction between the regulatory module and the effector module in the active state of the protein, and in the long term enable the structural study of the full length protein structure in interaction with its target RNA.