Polymerization Of N-carboxyanhydrides Research Articles

PH-sensitive poly(glutamic acid) grafted mesoporous silica nanoparticles for drug delivery

pH-sensitive poly(L-glutamic acid) grafted mesoporous silica nanoparticles (MSN-PLGA) were prepared by the surface-initiated N-carboxyanhydride polymerization method. The resultant MSN-PLGA was well dispersed in aqueous medium and showed high drug loading efficiency, superior stability, and significantly higher drug release rates. The cumulative release of doxorubicin hydrochloride (DOX) from DOX-loaded MSN-PLGA (DOX@MSN-PLGA) was pH-dependent and the release rate was much higher at pH 5.5 than that at pH 7.4. The cytotoxicity results indicated that the blank MSN-PLGA was biocompatible and the DOX@MSN-PLGA had potent in vitro cytotoxicity effect similar to free DOX. Overall, these results demonstrate that MSN-PLGA is a promising platform to build pH controlled drug delivery systems for cancer therapy.

Thermosensitive polyion complex micelles prepared by self-assembly of two oppositely charged diblock copolymers

Polyion complex (PIC) micelles were spontaneously formed in aqueous solutions through electrostatic interaction between two oppositely charged block copolymers, poly(N-isopropylacrylamide)-b-poly(L-glutamic acid) and poly(N-isopropylacrylamide)-b-poly(L-lysine). Their controlled synthesis was achieved via the ring opening polymerization of N-carboxyanhydrides (NCA), γ-benzyloxycarbonyl-L-lysine (Lys(Z)-NCA) or γ-benzyl-L-glutamate (BLG-NCA) with amino-terminated poly(N-isopropylacrylamide) macroinitiator and the subsequent deprotection reaction. The formation of PIC micelles was confirmed by dynamic light scattering and transmission electron microscopy. Turbidimetric characterization suggested that the formed PIC micelles had a concentration-dependent thermosensitivity and their phase transition behaviors could be easily adjusted either by the block length of coplymers or the concentration of micelles.

Stimuli responsive synthetic polypeptides derived from N-carboxyanhydride (NCA) polymerisation

The progress in NCA polymerisation combined with advanced orthogonal functionalization techniques as well as the integration with other controlled polymerisation techniques significantly widened the scope of polypeptide building blocks in a variety of material designs. Well-defined synthetic stimuli-responsive polypeptides ("smart" polypeptides) with incorporated different functionalities have been extensively explored over the past decades. Their significant potential lies in the fact that they combine natural and synthetic elements both contributing to their properties. These novel materials have potential applications in biomedicine and biotechnology including tissue engineering, drug delivery and biodiagnostics. Responsive polypeptides are capable of undergoing conformational changes and phase transition accompanied by variations in the chemical and physical changes of the polypeptides in response to an external stimulus such as biologically relevant species (i.e. biomolecules), the environment (i.e. temperature, pH), irradiation with light or exposure to a magnetic field. In this review, the recent developments including synthetic strategies and applications of synthetic stimuli-responsive homo- and block polypeptides are reviewed.

Tandem Catalysis for the Preparation of Cylindrical Polypeptide Brushes

Here, we report a method for synthesis of cylindrical copolypeptide brushes via N-carboxyanhydride (NCA) polymerization utilizing a new tandem catalysis approach that allows preparation of brushes with controlled segment lengths in a straightforward, one-pot procedure requiring no intermediate isolation or purification steps. To obtain high-density brush copolypeptides, we used a "grafting from" approach where alloc-α-aminoamide groups were installed onto the side chains of NCAs to serve as masked initiators. These groups were inert during cobalt-initiated NCA polymerization and gave allyloxycarbonyl-α-aminoamide-substituted polypeptide main chains. The alloc-α-aminoamide groups were then activated in situ using nickel to generate initiators for growth of side-chain brush segments. This use of stepwise tandem cobalt and nickel catalysis was found to be an efficient method for preparation of high-chain-density, cylindrical copolypeptide brushes, where both the main chains and side chains can be prepared with controlled segment lengths.

Surface-grafted polysarcosine as a peptoid antifouling polymer brush.

Poly(N-substituted glycine) "peptoids" are a class of peptidomimetic molecules receiving significant interest as engineered biomolecules. Sarcosine (i.e., poly(N-methyl glycine)) has the simplest side chain chemical structure of this family. In this Article, we demonstrate that surface-grafted polysarcosine (PSAR) brushes exhibit excellent resistance to nonspecific protein adsorption and cell attachment. Polysarcosine was coupled to a mussel adhesive protein-inspired DOPA-Lys pentapeptide, which enabled solution grafting and control of the surface chain density of the PSAR brushes. Protein adsorption was found to decrease monotonically with increasing grafted chain densities, and protein adsorption could be completely inhibited above certain critical chain densities specific to different polysarcosine chain lengths. The dependence of protein adsorption on chain length and density was also investigated by a molecular theory. PSAR brushes at high chain length and density were shown to resist fibroblast cell attachment over a 7 week period, as well as resist the attachment of some clinically relevant bacterial strains. The excellent antifouling performance of PSAR may be related to the highly hydrophilic character of polysarcosine, which was evident from high-pressure liquid chromatography measurements of polysarcosine and water contact angle measurements of the PSAR brushes. Peptoids have been shown to resist proteolytic degradation, and polysarcosine could be produced in large quantities by N-carboxy anhydride polymerization. In summary, surface-grafted polysarcosine peptoid brushes hold great promise for antifouling applications.

Self-Assembled Cationic Micelles Based on PEG-PLL-PLLeu Hybrid Polypeptides as Highly Effective Gene Vectors

Developing safe and effective nonviral gene vector is highly crucial for successful gene therapy. In the present study, we designed a series of biodegradable micelles based on hybrid polypeptide copolymers of poly(ethylene glycol)-b-poly(l-lysine)-b-poly(l-leucine) (PEG-PLL-PLLeu) for efficient gene delivery. A group of amphiphilic PEG-PLL-PLLeu hybrid polypeptide copolymers were synthesized by ring-opening polymerization of N-carboxyanhydride, and the chemical structure of each copolymer was characterized by (1)H NMR and FT-IR spectroscopy measurement. The PEG-PLL-PLLeu micelles were positively charged with tunable sizes ranging from 40 to 90 nm depending on the length of PLL and PLLeu segment. Compared with PEG-PLL copolymers, PEG-PLL-PLLeu micelles demonstrated significantly higher transfection efficiency and less cytotoxicity. Furthermore, the transfection efficiency and biocompatibility of the micelles can be simultaneously improved by tuning the length of PLL and PLLeu segments. The transfection efficiency of PEG-PLL-PLLeu micelles in vivo was two to three times higher than that of PEI(25k), which was attributable to their capability of promoting DNA condensation and cell internalization as well as successful lysosome escape. Hence well-defined PEG-PLL-PLLeu micelles would serve as highly effective nonviral vectors for in vivo gene delivery.

Enhanced stability of polymeric micelles based on postfunctionalized poly(ethylene glycol)-b-poly(γ-propargyl L-glutamate): the substituent effect.

One of the major obstacles that delay the clinical translation of polymeric micelle drug delivery systems is whether these self-assembled micelles can retain their integrity in blood following intravenous (IV) injection. The objective of this study was to evaluate the impact of core functionalization on the thermodynamic and kinetic stability of polymeric micelles. The combination of ring-opening polymerization of N-carboxyanhydride (NCA) with highly efficient "click" coupling has enabled easy and quick access to a family of poly(ethylene glycol)-block-poly(γ-R-glutamate)s with exactly the same block lengths, for which the substituent "R" is tuned. The structures of these copolymers were carefully characterized by (1)H NMR, FT-IR, and GPC. When pyrene is used as the fluorescence probe, the critical micelle concentrations (CMCs) of these polymers were found to be in the range of 10(-7)-10(-6) M, which indicates good thermodynamic stability for the self-assembled micelles. The incorporation of polar side groups in the micelle core leads to high CMC values; however, micelles prepared from these copolymers are kinetically more stable in the presence of serum and upon SDS disturbance. It was also observed that these polymers could effectively encapsulate paclitaxel (PTX) as a model anticancer drug, and the micelles possessing better kinetic stability showed better suppression of the initial "burst" release and exhibited more sustained release of PTX. These PTX-loaded micelles exerted comparable cytotoxicity against HeLa cells as the clinically approved Cremophor PTX formulation, while the block copolymers showed much lower toxicity compared to the cremophor-ethanol mixture. The present work demonstrated that the PEG-b-PPLG can be a uniform block copolymer platform toward development of polymeric micelle delivery systems for different drugs through the facile modification of the PPLG block.

Synthesis of Thermo‐ and pH‐Sensitive Polyion Complex Micelles for Fluorescent Imaging

Two thermo- and pH-sensitive polypeptide-based copolymers, poly(N-isopropylacrylamide-co-N-hydroxymethylacrylamide)-b-poly(L-lysine) (P(NIPAAm-co-HMAAm)-b-PLL, P1) and poly(N-isopropylacrylamide-co-N-hydroxymethylacrylamide)-b-poly(glutamic acid) (P(NIPAAm-co-HMAAm)-b-PGA, P2), have been designed and synthesized by the ring-opening anionic polymerization of N-carboxyanhydrides (NCA) with amino-terminated P(NIPAAm-co-HMAAm). It was found that the block copolymers exhibit good biocompatibility and low toxicity. As a result of electrostatic interactions between the positively charged PLL and negatively charged PGA, P1 and P2 formed polyion complex (PIC) micelles consisting of polyelectrolyte complex cores and P(NIPAAm-co-HMAAm) shells in aqueous solution. The thermo- and pH-sensitivity of the PIC micelles were studied by UV/Vis spectrophotometry, dynamic light scattering (DLS), and transmission electron microscopy (TEM). Moreover, fluorescent PIC micelles were achieved by introducing two fluorescent molecules with different colors. Photographs and confocal laser scanning microscopy (CLSM) showed that the fluorescence-labeled PIC micelles exhibit thermo- and pH-dependent fluorescence, which may find wide applications in bioimaging in complicated microenvironments.

Star polypeptides by NCA polymerisation from dendritic initiators: synthesis and enzyme controlled payload release

Well-defined star polypeptides were successfully synthesised by initiation of γ-benzyl-L-glutamate N-carboxyanhydride (NCA) from polypropylene imine (PPI) dendrimers. The dendrimer generation and the dendrimer to NCA ratio were systematically varied to afford a range of star shaped architectures with a maximum of 8 to 64 poly(γ-benzyl-L-glutamate) (PBLG) arms. High molar masses up to 500 000 g mol−1 were achieved that were otherwise unobtainable for the analogous linear polypeptides in the absence of the dendrimer core. By deprotection the PBLG star polypeptides were converted into poly(L-glutamic acid) (PGA) star polypeptides. Various concentrations of rhodamine B could be loaded into the polypeptide star architectures dependent on the number of PGA arms and the length of the grafted polypeptide chain produced. Furthermore, the polypeptidic nature of PGA-grafted dendrimers ensures their responsiveness, through controlled degradation, to the target enzyme thermolysin. An enzyme-responsive release mechanism was devised and demonstrated in which rhodamine B payload was released upon incubation with thermolysin but not the control enzyme chymotrypsin. The rate and extent of rhodamine B release was dependent on the composition of the hybrid material, which can be readily tuned to provide highly specific temporal and spatial controlled release.

Polypeptide core–shell silica nanoparticles with high grafting density by N-carboxyanhydride (NCA) ring opening polymerization as responsive materials and for bioconjugation

Silica nanoparticles were furnished with a functional polypeptide shell to create a pH-responsive inorganic–organic hybrid material. Free amine groups present on silica nanoparticles initiated the N-carboxyanhydride (NCA) polymerization of particular amino acid NCAs directly onto the inorganic support, offering a convenient method to functionalize silica core nanoparticles with a uniformly dense polypeptide shell. Poly(γ-benzyl-L-glutamate) (PBLG), poly(e-carbobenzyoxy-L-lysine) (PZLL), and S-tert-butyl protected polycysteine (PtBLC) were grafted from the silica core both independently as homopolypeptides and simultaneously to form a copolypeptide shell, highlighting the versatility that the grafting mechanism possesses. The grafting of PBLG was investigated in detail at 0 °C and 20 °C to determine any differences in the size and uniformity of the polypeptide shell formed. Dynamic light scattering (DLS) analysis revealed a correlation between the thickness of the uniform organic shell and the amount of amino acid in the monomer feed, with higher linearity at the lower polymerization temperature. Size Exclusion Chromatography (SEC) analyses of degrafted PBLG confirmed the DLS results. A high grafting density of around 0.4 PBLG chains per nm2 was calculated highlighting the control afforded in this approach to polypeptide grafting. Subsequent deprotection of the PBLG homopolypeptide shell afforded pH-sensitive poly(glutamic acid) (PGA) coupled silica nanoparticles. The selective release of a model rhodamine B dye was demonstrated to emphasize the potential that these hybrid nanomaterials have for the on-demand release of payload molecules in response to a targeted pH trigger. Moreover, covalent bioconjugation was successfully shown by attachment of green fluorescent protein.

Non-Isothermal Degradation Kinetics of Hybrid Copolymers Containing Thermosensitive and Polypeptide Blocks

Novel, self-associating hybrid copolymers were synthesized via controlled ring-opening polymerization of N-carboxyanhydride of Z-L-lysine (Z-L-Lys-NCA), initiated by amino-functional macroinitiators. A poly(N-isopropylacry-lamide) (PNIPAm)-based macroinitiator containing 10 mol% of polyoxyethylene grafts and a terminal primary amine group in the form of ammonium hydrochloride (PNIPAm-g-PEО) was synthesized and used to initiate the ammonium- mediated ring-opening polymerization of NCA described by Dimitrov and Schlaad [1]. Thus, hybrid copolymers ((PNIPAm-g-PEO)-b-PLys) with controlled molar-mass characteristics and functionality were obtained. The potential applications of PNIPAm-based copolymers in the systems for controlled drug release, immobilization of enzymes and protein purification have aroused great interest in the studies of their properties and behaviour. The thermal stability and thermodynamic properties of the copolymers obtained were studied. The differential thermal analysis of polyfunctional hybrid copolymers (PNIPAm-g-PEO)-b-PLys) showed that thermooxidative destruction occurs in two stages: primary, of the unstable fragments (grafted chains of PEO); and secondary, of the main polymer chains of poly(N-isopropylacry-lamide) and poly(L-lysine). The kinetics of thermal degradation was evaluated and the values of the activation energy of the degradation process, changes of Gibbs free energy, enthalpy and entropy for the formation of the activated complex were also calculated.

Molecular Bottlebrushes with Polypeptide Backbone Prepared via Ring‐Opening Polymerization of NCA and ATRP

A new type of molecular bottlebrush with poly-L-lysine (PLL) as backbone was synthesized via ROP followed by ATRP. A Nϵ-bromoisobutyryl functionalized Nα-CBZ-L-lysine was firstly synthesized and converted in polymerizable α-amino acid N-carboxyanhydride (NCA), which was then polymerized using Ni(0) transition metal complex to give well-defined bromo-functionalized homopolypeptide (PBrLL), from which we prepared two types of polypeptide bottlebrushes with polystyrene and poly(oligoethylene glycol methacrylate) as side-chains. PBrLL macroinitiator was demonstrated to have high initiation efficiency for ATRP, which allowed good control over side-chain length. CD and FTIR characterization revealed that both PBrLL macroinitiator and PLL backbone of bottlebrushes adopted α-helical conformation in appropriate solvents.

Selective Enzymatic Degradation of Self-Assembled Particles from Amphiphilic Block Copolymers Obtained by the Combination of N-Carboxyanhydride and Nitroxide-Mediated Polymerization

Combining controlled radical polymerizations and a controlled polypeptide synthetic technique, such as N-carboxyanhydride (NCA) ring-opening polymerization, enables the generation of well-defined block copolymers to be easily accessible. Here we combine NCA polymerization with the nitroxide-mediated radical polymerization of poly(n-butyl acrylate) (PBA) and polystyrene (PS), using a TIPNO and SG1-based bifunctional initiator to create a hybrid block copolymer. The polypeptide block consists of (block) copolymers of poly(L-glutamic acid) embedded with various quantities of L-alanine. The formed superstructures (vesicles and micelles) of the block copolymers possessed varying degrees of enzyme responsiveness when exposed to elastase and thermolysin, resulting in controlled enzymatic degradation dictated by the polypeptide composition. The PBA containing block copolymers possessing 50% L-alanine in the polypeptide block showed a high degradation response compared to polymers containing lower L-alanine quantities. The particles stabilized by copolypeptides with L-alanine near the hydrophobic block showed full degradation within 4 days. Particles containing polystyrene blocks revealed no appreciable degradation under the same conditions, highlighting the specificity of the system and the importance of synthetic polymer selection. However, when the degradation temperature was increased to 70 °C, degradation could be achieved due to the higher block copolymer exchange between the particle and the solution. A number of novel biohybrid structures are disclosed that show promise as enzyme-responsive materials with potential use as payload release vehicles, following their controlled degradation by specific, target, enzymes.

Preparation and Evaluation of Poly-l-Lysine Stationary Phase for Hydrophilic Interaction/Reversed-Phase Mixed-Mode Chromatography

In this work, a poly-l-lysine-grafted stationary phase was synthesized by polymerization of N-carboxyanhydride of l-lysine initiated by 3-aminopropylated silica. The resulting material was characterized by FT-IR spectra, elemental analysis and thermogravimetric analysis, which clearly indicated that the new phase had been prepared successfully. The retention of polar solutes depending on acetonitrile content in mobile phase exhibited “U-shaped” curves, which was an indication of hydrophilic interaction liquid chromatography (HILIC)/reversed-phase liquid chromatography (RPLC) mixed-mode retention behavior. The retention mechanisms in HILIC and RPLC modes also were investigated. Phenol compounds, aniline compounds and hydrophilic compounds were separated in RPLC or HILIC mode on the new stationary phase, respectively. This result shows that the new phase could be used for both RPLC and HILIC applications, providing greater flexibility for real sample analysis.

Glycopolypeptide-encapsulated Mn-doped ZnS quantum dots for drug delivery: Fabrication, characterization, and in vitro assessment

In this work, glycopolypeptide nanoparticles (GPNPs) composed of Mn doped ZnS quantum dots (QDs) as core and glycopolypeptides as shell were synthesized through the surface initiated polymerization of N-carboxyanhydrides and surface condensation polymerization with carboxymethyldextran on amine-functionalized QDs. The loading and release behavior of ibuprofen on the GPNPs were investigated. The GPNPs exhibited not only high loading but also controlled release behavior. The cytotoxicity of the GPNPs was evaluated by incubating with HEK293T cell lines and they were shown to be of low cytotoxicity. They appear to be a very promising candidate for targeted drug delivery.

Oxyfold: A Simple and Efficient Solid‐Supported Reagent for Disulfide Bond Formation

The synthesis and use of novel polymer-supported reagents for disulfide bond formation is described. This family of supported reagents consists of a series of oxidized methionines grafted onto a solid support. Their cost and the simplicity of their preparation through N-carboxyanhydride polymerization on beads make them reactants of choice for the formation of disulfide bridges in peptides.

Synthesis of poly(ethylene glycol)/polypeptide/poly(D ,L -lactide) copolymers and their nanoparticles

Core-shell structured nanoparticles of poly(ethylene glycol) (PEG)/polypeptide/poly(D,L-lactide) (PLA) copolymers were prepared and their properties were investigated. The copolymers had a poly(L-serine) or poly(L-phenylalanine) block as a linker between a hydrophilic PEG and a hydrophobic PLA unit. They formed core-shell structured nanoparticles, where the polypeptide block resided at the interface between a hydrophilic PEG shell and a hydrophobic PLA core. In the synthesis, poly(ethylene glycol)-b-poly(L-serine) (PEG-PSER) was prepared by ring opening polymerization of N-carboxyanhydride of O-(tert-butyl)-L-serine and subsequent removal of tert-butyl groups. Poly(ethylene glycol)-b-poly(L-phenylalanine) (PEG-PPA) was obtained by ring opening polymerization of N-carboxyanhydride of L-phenylalanine. Methoxy-poly(ethylene glycol)-amine with a MW of 5000 was used as an initiator for both polymerizations. The polymerization of D,L-lactide by initiation with PEG-PSER and PEG-PPA produced a comb-like copolymer, poly(ethylene glycol)-b-[poly(L-serine)-g-poly(D,L-lactide)] (PEG-PSER-PLA) and a linear copolymer, poly(ethylene glycol)-b-poly(L-phenylalanine)-b-poly(D,L-lactide) (PEG-PPA-PLA), respectively. The nanoparticles obtained from PEG-PPA-PLA showed a negative zeta potential value of −16.6 mV, while those of PEG-PSER-PLA exhibited a positive value of about 19.3 mV. In pH 7.0 phosphate buffer solution at 36 °C, the nanoparticles of PEG/polypeptide/PLA copolymers showed much better stability than those of a linear PEG-PLA copolymer having a comparable molecular weight. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011

Enzymatic degradation of the hydrogels based on synthetic poly(α-amino acid)s

Biodegradable hydrogels are studied as potential scaffolds for soft tissue regeneration. In this work biodegradable hydrogels were prepared from synthetic poly(α-amino acid)s, poly(AA)s. The covalently crosslinked gels were formed by radical copolymerization of methacryloylated poly(AA)s, e.g. poly[N (5)-(2-hydroxy-ethyl)-L-glutamine-ran-L-alanine-ran-N (6)-methacryloyl-L-lysine], as a multifunctional macro-monomer with a low-molecular-weight methacrylic monofunctional monomer, e.g. 2-hydroxyethyl methacrylate (HEMA). Methacryloylated copolypeptides were synthesized by polymerization of N-carboxyanhydrides of respective amino acids and subsequent side-chain modification. Due to their polypeptide backbone, synthetic poly(AA)s are cleavable in biological environment by enzyme-catalyzed hydrolysis. The feasibility of enzymatic degradation of poly(AA)s alone and the hydrogels made from them was studied using elastase, a matrix proteinase involved in tissue healing processes, as a model enzyme. Specificity of elastase for cleavage of polypeptide chains behind the L-alanine residues was reflected in faster degradation of L-alanine-containing copolymers as well as of hydrogels composed of them.

Optimization of N-carboxyanhydride (NCA) polymerization by variation of reaction temperature and pressure

Several new methods for the controlled ring-opening polymerization of N-carboxyanhydrides (NCA ROP) have been established in the recent past, all of which based on the normal amine mechanism. In this paper the optimal NAM polymerization conditions were investigated combining the high-vacuum and the low-temperature for the NCAs of γ-benzyl-L-glutamate (BLG), Ne-benzyloxycarbonyl-L-lysine (ZLL), L-alanine (Ala), β-benzyl-L-aspartate (BLA), O-benzyl-L-serine (BLS), and O-benzyl-L-threonine (BLT). The polymerizations were followed by FTIR, size exclusion chromatography (SEC) and MALDI-ToF-MS to provide information of the monomer conversion, polymer molecular weight and chain composition as a function of pressure and temperature. It was found that the studied NCAs could be divided into two groups: in the first group monomers of BLG, ZLL and Ala polymerized considerably faster when a lower pressure of 1 × 10−5 bar was applied. MALDI-ToF-MS analysis confirmed that the formation of side products for these monomers mostly started after full monomer conversion. The second group of monomers, i.e. BLA, BLS and BLT, polymerized considerably slower than the first group and no effect was observed from the lower pressure. On the other hand, the number of side reactions was significant at 20 °C, so that the polymerizations for the latter monomers should preferably be done at 0 °C. By combining both methods, multiblock polypeptides were synthesized including a tetrablock of PBLG-b-PAla-b-PZLL-b-PBLA with a polydispersity of 1.3.

Synthesis of glycosylated peptides by NCA polymerization for recognition of human T-cells

Peracetylated sugars (glucose, mannose, galactose) were attached via a thiourea linker to the e-amino group of α-BOC-lysine and α-Z-lysine. After transformation to the N-carboxyanhydride (NCA), the product was copolymerized with both PEGylated lysine-NCA and e-TFA-lysine-NCA by both tertiary amine and nickel complex catalysts. The resulting statistical copolypeptides are water-soluble after global deprotection and show an α-helical secondary structure. Fluorescein isothiocyanate (FITC) was then coupled to the free e-NH2 groups of the lysine repeating units. The galactosylated fluorescent peptides are specifically incorporated in human T lymphocytes at 37 °C, as shown by flow cytometry and fluorescence microscopy. Therefore they are potentially useful for selective staining of cells or targeted drug delivery.