Mutagenic Primers Research Articles

The 60 nm gold nanoparticles improve qPCR amplification efficiency through specific palindromic sequences (GGATCC or ACCGGT) in primers

BackgroundPolymerase chain reaction (PCR) technology and quantitative real-time PCR (qPCR) technology are widely used in clinical diagnosis and research, but amplification efficiency and sensitivity are still key problems for researchers. An increasing number of reports show that gold nanoparticles (AuNPs) can be used to improve the sensitivity and amplification efficiency of PCR. Here, we found that 60 nm gold nanoparticles with a positive charge (60 nm- Au+) can enhance the amplification efficiency of qPCR. MethodsMouse DNA was extracted by the alkaline lysis method. Primer 5.0 software was used to design primers and mutation primers, and the DNA fragments were obtained by the method of synthesizing plasmids. The qPCR was applied to amplify target gene fragments. ResultsThe amplification efficiency of qPCR was improved by about 1.828 times in the experimental group with 60 nm- Au+ compared with the control group without 60 nm- Au+. The primer pair contains a specific palindromic sequence (GGATCC or ACCGGT). And 60 nm Au+ did not enhance the amplification efficiency of qPCR when the above primer was mutated. ConclusionsThe primers contain special palindrome sequences (GGATCC or ACCGGT) with 60 nm- Au+ can enhance the amplification efficiency of qPCR. Therefore, it suggests a more in-depth understanding of the mechanism and function of gold nanoparticles and primer sequences. This study has presented some implications for gold nanoparticles application in the development of qPCR technology.

Development of multiplex real-time PCR for detection of clarithromycin resistance genes for the Mycobacterium abscessus group.

Introduction. The M. abscessus molecular identification and its drug-resistance profile are important to choose the correct therapy.Aim. This work developed a multiplex real-time PCR (mqPCR) for detection of clarithromycin resistance genes for the Mycobacterium abscessus group.Methodology. Isolates received by Adolfo Lutz Institute from 2010 to 2012, identified by PCR restriction enzyme analysis of a fragment of the hsp65 gene (PRA-hsp65) as M. abscessus type 1 (n=135) and 2 (n=71) were used. Drug susceptibility test (DST) for CLA were performed with reading on days 3 and 14. Subespecies identification by hsp65 and rpoB genes sequencing and erm(41) and rrl genes for mutation detection and primer design were performed. erm(41) gene deletion was detected by conventional PCR. Primers and probes were designed for five detections: erm(41) gene full size and with deletion; erm(41) gene T28 and C28; rrl gene A2058.Results. In total, 191/206 (92.7 %) isolates were concordant by all methods and 13/206 (6.3 %) were concordant only between molecular methods. Two isolates (1.0 %) were discordant by mqPCR compared to rrl gene sequencing. The mqPCR obtained 204/206 (99.0 %) isolates in agreement with the gold standard, with sensitivity and specificity of 98 and 100 %, respectively, considering the gold standard method and 92 and 93 % regarding DST.Conclusion. The mqPCR developed by us proved to be an easy-to-apply tool, minimizing time, errors and contamination.

Inverse PCR for Site-Directed Mutagenesis.

Inverse PCR is a powerful tool for the rapid introduction of desired mutations at desired positions in a circular double-stranded DNA sequence. In this technique, custom-designed mutant primers oriented in the inverse direction are used to amplify the entire circular template with incorporation of the required mutation(s). By careful primer design, it can be used to perform such diverse modifications as the introduction of point or multiple mutations, the insertion of new sequences, and even sequence deletions. Three primer formats are commonly used, nonoverlapping, partially overlapping, and fully overlapping primers, and here we describe the use of nonoverlapping primers for introduction of a point mutation. Use of such a primer setup in the PCR, with one of the primers containing the desired mismatch mutation, results in the amplification of a linear, double-stranded, mutated product. Methylated template DNA is removed from the non-methylated PCR product by DpnI digestion, and the PCR product is then phosphorylated by polynucleotide kinase treatment before being recircularized by ligation and transformed to E. coli. This relatively simple site-directed mutagenesis procedure is of major importance in biology and biotechnology where it is commonly employed for the study and engineering of DNA, RNA, and proteins.

Machine Learning Combined with Restriction Enzyme Mining Assists in the Design of Multi-Point Mutagenic Primers

The polymerase chain reaction–restriction fragment length polymorphism (PCR-RFLP) experiment has the characteristics of low-cost, rapidity, simplicity, convenience, high sensitivity and high specificity; thus, many small and medium laboratories use it to perform all kinds of single nucleotide polymorphisms (SNPs) genotyping works, and as a molecular biotechnology for disease-related analysis. However, many single nucleotide polymorphisms lack available restriction enzymes to distinguish the specific genotypes on a target SNP, and that causes the PCR-RFLP assay which is unavailable to be called mismatch PCR-RFLP. In order to completely solve the problem of mismatch PCR-RFLP, we have created a teaching–learning-based optimization (TLBO) multi-point mutagenic primer design algorithm which, combined with REHUNT, provides a complete and specific restriction enzyme mining solution. The proposed method not only introduces several search strategies suitable for multi-point mutagenesis primers, but also enhances the reliability of mutagenic primer design. In addition, this study is also designed for more complex SNP structures (with multiple dNTPs and insertion and deletion) to provide specific solutions for SNP diversity. We tested against fifteen mismatch PCR-RFLP SNPs in the human SLC6A4 gene on the NCBI dbSNP database as experimental templates. The experimental results indicate that the proposed method is helpful for providing the multi-point mutagenic primers that meet the constrain conditions of PCR experiments.

CRISPR/Cas9 mediated triple signal amplification platform for high selective and sensitive detection of single base mutations

Single base mutations detection is crucial for the diagnosis and treatment of cancer. However, the current methods with poor selectivity and sensitivity required large instruments, which are difficult to meet clinical demands. Herein, we develop a CRISPR/Cas9 based visual colorimetric platform to specifically detect all single base mutations. In this strategy, the Recombinase Polymerase Amplification (RPA) was firstly used to amplify the target, and introduced the PAM site in the target DNA sequence by designing the point mutation primer, thus achieving detection for all single base mutations by the clustered regularly interspaced short palindromic repeats (CRISPR)/Cas9-mediated specific recognition. With the help of CRISPR/Cas9 system, those RPA products can release single strand DNA to hybridize with the padlock probe and trigger rolling circle amplification (RCA). Based on the magnetic separation, HRP-gold nanoparticles complex (hGNPs) and biotin modified probe (Bio-probe) were further used to achieve enhanced visual variations assay by hybridizing with RCA products. Benefiting from the RPA assisted triple signal amplification, this method not only showed enhanced sensitivity with a limit of detection (LOD) as low as 0.2 fM and 0.01% of KRAS-G12D mutation percentage, but the specificity against KRAS-G12D mutation also be synergistically enhanced by combining the CRISPR/Cas9-mediated specific recognition with the specific T4 ligation reaction of RCA system. Furthermore, this system has been successfully used to visually detect genome in serum, suggesting its great potential for point-of-care diagnosis in clinical.

Fluorescence Resonance Energy Transfer Based Biosensor from Thermophilic Bacterial Periplasmic Binding Protein to Measure Branched-chain and Aromatic Amino Acids

Aim: Exploring the ligand binding capacity of leucine-isoleucine-valine binding protein from Thermotoga maritima.
 Background: The Fischer ratio, ratio of concentrations between branched-chain and aromatic amino acids, has been considered as an indicator of hepatic disease involving metabolic dysfunctions since its instigation in the 1970's. These amino acids are usually measured by high performance liquid chromatography, gas chromatography and enzymatic spectrophotometry. Considering the future potential of periplasmic binding proteins in clinical diagnosis, leucine-isoleucine-valine binding protein from a thermophilic bacterium Thermotoga maritima was purified and characterized, and evaluated its binding properties with twenty amino acids. The protein's stereo-specificity was also tested due to its importance in astrobiology research. Amino acids and carbohydrates are both known to exist in extraterrestrial environments, and stereo-chemistry is the key aspect for distinguishing between abiotic and biotic origin.
 Results: Single amino acid substitutions were generated by overlapping polymerase chain reaction mediated mutagenesis using mutagenic primers to construct two mutants of leucine-isoleucine-valine binding protein (LIVBP). The first mutant of LIVBP in which phenylalanine (F) at 118 position was replaced with cysteine (C) was termed as LIVBP-F118C and the resultant plasmid was named as pKM242. Another mutant of LIVBP in which aspartic acid (D) at 221 position was replaced with cysteine was termed as LIVBP-D221C and the resultant plasmid was named as pKM244. Since the LIVBP-F118C showed higher labeling and fluorescence resonance energy transfer efficiency compared to that of D221C, the LIVBP-F118C was used for further study.
 Conclusion: Fluorescence resonance energy transfer technology was applied to measure dissociation constant (Kd) where chimeric isoleucine-valine binding protein (LIVBP) was engineered to conjugate a donor fluorophore at amino-terminal and an acceptor fluorophore at the incorporated cysteine residue. Ligand binding studies revealed that LIVBP from Thermotoga maritima was able to bind with fourteen amino acids out of twenty including branched-chain amino acids (BCAAs) and aromatic amino acids (AAAs) with Kd values ranging from 10-6 to 10-9 M. The Kd values of BCAAs, AAAs, methionine and cysteine were observed at nM level. Highest Kd value was observed for L-leucine (37.2 nM) and L-phenylalanine (44.6 nM). These results indicated that LIVBP from Thermotoga maritima has a broader substrate specificity than previously reported for LIVBP from other organisms, which might be helpful for the development of a miniaturized and noninvasive biosensor to measure BCAAs and AAAs.

GeneORator: An Efficient Method for the Systematic Mutagenesis of Entire Genes.

Directed evolution is a powerful tool for the rapid improvement of a target protein toward a desired fitness criteria, such as activity, specificity, or stability. In order to achieve these desired improvements, it is often beneficial to subject the entirety of the protein to mutagenesis. However, the creation of such libraries by targeted methods (i.e. site-directed mutagenesis) can be a laborious and costly task. Here we outline the GeneORator method, which uses Boolean "OR" logic to introduce specific codon mutations at multiple loci in a single reaction, thereby greatly reducing the experimental workload. The method describes library synthesis using asymmetric PCR, in which mutagenic primers are designed to create OR-type mutations at multiple sites of variation in a two-step protocol. As an example, we show how this can be utilized for controlled and economical mutagenesis of every amino acid codon in a gene.

Designing Overlap Extension PCR Primers for Protein Mutagenesis: A Programmatic Approach.

Overlap extension PCR is one of the routinely used methods to generate mutagenic genes for the functional and structural study of proteins. However, it is time-consuming to design the overlapping mutagenic primers and gene primers by manual operation. In this chapter, we present a Python script that is able to search all the possible primer combinations according to the preset definitions and calculate the necessary parameters of each primer for the users, which could facilitate the primer design process. Up to 256 pairs of primers can be provided for selection using this script.

Prevalence and Prognostic Impact of FLT3-ITD and NPM1 Mutations: A Cohort of Patients with Acute Myeloid Leukemia from the ABC-SP, Brazil

Several factors determine the prognosis of patients with Acute Myeloid Leukemia (AML) including mutations in FLT3 (15-25%) and NPM1 (35%), which carry a poor and a favorable prognostic value, respectively. In latest LeukemiaNET classification, such mutations are, together, sole factor for classification groups on all 3 risk groups. Few studies are investigating the prevalence and clinical correlation of these mutations in the Brazilian population. Here we show the prevalence and impact of NPM1 and FLT3 mutations in the ABC region of São Paulo.We prospectively and retrospectively evaluated 38adult AML patients from Hospital Estadual Mario Covas from May 2008 until October 2016.To investigate the mutations, we first extracted the genomic DNA using DNA Illustrative Blood GenomicPrep Mini Spin® Kit from the collection of 5 mL of peripheral blood and bone marrow from patients previously selected. Second, we performed semi-quantitative PCR to amplify the samples using specific primers for NPM1 and FLT3 mutations. The PCR reaction was done through Taq DNA Polymerase Recombinant® reagent, according to the manufacturer's protocol. The product obtained using primers is approximately 318bp for NPM1 wild-type allele and 322bp for mutant allele of NPM1 and 393bp for wild-type FLT3 alleles and greater than 393bp for mutated alleles of the same gene.30-50 ng of DNA was used for amplification of the sequence of interest. After PCR reaction, we performed purification of the PCR product with PureLink PCR Micro® Kit.Afterward, the purified material was diluted with water nuclease-free. FLT3 material was diluted between 1:20 (if weak staining in the gel) and 1:30 (if high staining and DNA drag on the gel). While the dilution of NPM1 material ranges from 1:5 (if weak staining in the gel) to 1:10 (if high staining and DNA drag on the gel).Finally, we analyzed the PCR product, a mixture of 8.8 μL formamide, 0.2 μL GeneScan™ 600 LIZ® Size Standard v2.0 and 1 μL purified PCR product was made. This mixture was pipetted into a 96-well plate and incubated at 95 °C for 3 minutes, placed on an ice sheet for 5 min and taken to the capillary electrophoresis apparatus (Applied Biosystems 3500) programmed for analysis of long fragments. The injections were pre-analyzed in the Gene Mapper 5 program. As a result of the investigation, we had a good graphic reading of 38 samples for the FLT3 mutation and 34 for NPM1. We found 10 mutated samples for FTLT3 and 7 for NPM1 (26.3 and 20.6%, respectively). We conclude that FLT3 and NPM1 mutations are frequent in the Brazilian population, further studies are needed to confirm our preliminary results. DisclosuresNo relevant conflicts of interest to declare.

Mutagenesis Analysis of ABCB8 Gene Promoter of Danio rerio

The ABCB8 is one of the members under the ABCB subfamily of ATP-Binding Cassette (ABC) transporter which possess the ability in regulating the intracellular iron and heme transport. The loss of function mutation of ABCB8 gene leads to iron and heme accumulation in the cell which is highly toxic to human. However, the information regarding the expression regulation of this gene remains scarce. Hence, the objectives of this project are to determine the transcription factors binding site (TFBS) of ABCB8 and to identify the transcriptional roles of the cis-elements through mutagenesis analysis. To examine this, total genomic DNA was extracted from Danio rerio and the promoter sequence was isolated by using specific pair of primers through polymerase chain reaction (PCR). The sample was sent for DNA sequencing and the result showed 98% similarities to the zebrafish DNA sequence from clone DKEYP-87A6 in linkage group 24. Besides, the TFBS was studied in aspect of TFBS abundance, TFBS composition and TFBS distribution. The two most abundant TFBSs based on liver-specific profile were HNF-3β and C/EBPβ, with 38 and 39 binding sites, respectively. The sequence of ABCB8 promoter gene was mutated through substitution of the AP-1 binding site at location 535 with other nucleotides by using a pair of mutagenic primers (forward primer: 5’-TGGGGGTTTAGATATTGAAAC-3’; reverse primer: 5’-AACTCGC ATACATTTCAGTCATC-3’). This result may benefit the development of new diagnostics and therapeutics for iron-associated disorder.

PCR-Free Methodology for Detection of Single-Nucleotide Polymorphism with a Cationic Polythiophene Reporter.

This study presents a nonamplification-based nucleic acid assay for the detection of single-nucleotide polymorphism (SNP) associated with familial Mediterranean fever (FMF) besides polymerase chain reaction (PCR)-based methodologies. The major objective is to show the potential of the proposed assay for rapid screening of FMF in a Mediterranean region of 400 million population. The assay relies on binding difference of specially designed wild and mutant primers to the target genomic DNA, followed by determination of unbound primers by quick titration of a cationic polythiophene reporter. The fluorescent reporter exhibits signal transition from 525 to 580 nm in the presence of unbound primers, and it correlates the binding affinity of label-free primers to the homozygous wild and mutant genomes. As a proof of concept, 26 real samples are studied relying on the ON and OFF fluorescence signals of the cationic polythiophene reporter. The results are analyzed by principal component analysis (PCA), which provides clear separation of healthy and patient individuals. The further analysis by support vector machine (SVM) classification has revealed that our assay converges to 96% overall accuracy. These results support that the PCR-free nucleic acid assay has a significant potential for rapid and cost-effective screening of familial Mediterranean fever.

Synthesis of libraries and multi-site mutagenesis using a PCR-derived, dU-containing template.

Directed DNA libraries are useful because they focus genetic diversity in the most important regions within a sequence. Ideally, all sequences in such libraries should appear with the same frequency and there should be no significant background from the starting sequence. These properties maximize the number of different sequences that can be screened. Described herein is a method termed SLUPT (Synthesis of Libraries via a dU-containing PCR-derived Template) for generating highly targeted DNA libraries and/or multi-site mutations wherein the altered bases may be widely distributed within a target sequence. This method is highly efficient and modular. Moreover, multiple distinct sites, each with one or more base changes, can be altered in a single reaction. There is very low background from the starting sequence, and SLUPT libraries have similar representation of each base at the positions selected for variation. The SLUPT method utilizes a single-stranded dU-containing DNA template that is made by polymerase chain reaction (PCR). Synthesis of the template in this way is significantly easier than has been described earlier. A series of oligonucleotide primers that are homologous to the template and encode the desired genetic diversity are extended and ligated in a single reaction to form the mutated product sequence or library. After selective inactivation of the template, only the product library is amplified. There are no restrictions on the spacing of the mutagenic primers except that they cannot overlap.

Mutagenesis Analysis of ABCB4 Gene Promoter of Danio rerio

Zebrafish abcb4 gene (ortholog to human ABCB1 gene) serves primarily in multidrug resistance (MDR) mechanism by effluxing chemotherapeutic agents, chemicals, xenobiotics, and numerous anti-cancer drugs out of the cells. This study aims to identify the specific transcription factor binding sites (TFBS) within the promoter region of zebrafish abcb4 gene and determine the functional roles of these factors in abcb4 gene expression regulation via mutagenesis analysis. First, primers were designed to target and amplify the promoter region of zebrafish abcb4 gene through gradient PCR. The zebrafish abcb4 gene promoter was then cloned into pGL3.0 vector and sent for sequencing. The sequencing results revealed high similarity to zebrafish DNA sequence from clone DKEY-24I24 in linkage group 16, indicating a successful cloning of targeted gene. Thereafter, consensus sequence of zebrafish abcb4 gene promoter was generated with the length of 1,392 bp which was close to its expected size during primer design (1,500 bp). Using MATCH tool, 155 TFBSs were found within zebrafish abcb4 gene promoter region. Activator protein 1 (AP-1) TFBS at 1,255 bp was chosen to be mutated through site-directed mutagenesis. Mutagenic primers (forward primer: 5’ GGG CAA GGC AGT ATA AAC GTG 3’ and reverse primer: 5’ TTA TGT TTC TAG GGA TTA CGT CAC 3’) were designed to substitute AGT with GGG to remove the AP-1 TFBS. By mutating the zebrafish abcb4 gene promoter, the MDR phenomenon driven by zebrafish abcb4 gene can be elucidated and this might provide clues to the development of tumor and malignancy in human. The results from this study may enrich the knowledge in chemotherapy and cancer treatments.

Gray mold in strawberries in the Paraná state of Brazil is caused by Botrytis cinerea and its isolates exhibit multiple-fungicide resistance

The objectives of this work were to investigate the Botrytis species that cause gray mold in strawberries in Paraná and to study their sensitivity to fungicides: procymidone (P), iprodione (I), boscalid (B), thiophanate-methyl (T), fluazinam (F), azoxystrobin (A) and difenoconazole (D). The identification of 150 isolates of Botrytis sp. was carried out by amplifying the DNA by PCR using specific primers. The sensitivity to fungicides was determined by in vitro assays with discriminatory doses and EC50 (effective concentration to inhibit 50% of the growth of the fungus), molecular characterization of mutations and ex vivo assays for disease control efficacy. Thirty phenotypes were selected from combinations (S-sensitive and R-resistant) for the EC50 studies. Molecular characterization was performed using specific primers for mutations in the cyt b, bos1 and β-tubulin genes to confirm the resistance genotype. Tests were carried out with fruit treated with the fungicides (P), (B), (F) and (A) x the different phenotypes. All isolates were confirmed as Botrytis cinerea. Forty-one isolates were classified as fungicide sensitive phenotypes and of these, six isolates showed resistance to all seven tested fungicides. The percentage of isolates resistant to the fungicides azoxystrobin, boscalid, difenoconazole, fluazinam, iprodione and procymidone was 90.7; 45.3; 33.3; 32.7; 44.0 and 43.3%, respectively. A total of 94.6% isolates were classified as highly resistant to thiophanate-methyl. The EC50 for the fungicides procymidone, fluazinam and boscalid ranged from less than 0.1 to greater than 100 μg/ml. For azoxystrobin, most isolates had an EC50 greater than 100 μg/ml. Isolates with more than one mutation for different fungicides were found. For the assay in fruits with infections from the field, only the fungicide fluazinam differed from the control treatment, showing lower final incidence of 33.3% and control efficiency of 55.6%. For the assay with inoculated fruits, the fungicide fluazinam best controlled the disease for the three isolates presenting an average final incidence of 33.3% and an average control efficiency of 61.9%. Therefore, disease management in the state of Paraná should be reviewed in terms of registering new fungicides to gray mold and the use of integrated management measures to reduce the reliance on fungicides.

Allele-specific PCR with a novel data processing method based on difference value for single nucleotide polymorphism genotyping of ALDH2 gene

Single nucleotide polymorphism (SNP) analysis based on allele-specific polymerase chain reaction (AS-PCR) is a relatively effective and economical method compared with other genotyping technologies such as DNA sequencing, DNA hybridization and isothermal amplification strategies. But AS-PCR is limited by its labor-intensive optimization of reaction parameters and time-consuming result assessment. In this study, we put forward a novel idea of data processing to address this problem. SNP analysis was accomplished by AS-PCR with endpoint electrochemical detection. For each sample, two separate reactions were run simultaneously with two sets of allele-specific primers (wild-type primers for W system and mutant primers for M system). We measured their redox current signals on screen-printed electrodes once AS-PCR finished and calculated the difference value of current signals between two systems to determine the genotyping result. Based on the difference value of fluorescent signals, real-time fluorescent PCR was used to study reaction parameters in AS-PCR. With screened parameters, we obtained the genotyping results within 50 min. 36 hair-root samples from volunteers were analyzed by our method and their genotypes of ALDH2 gene (encoding aldehyde dehydrogenase 2) were totally identical with data from commercialized sequencing. Our work first employed difference value between two reaction systems to differentiate allele and provided a novel idea of data processing in AS-PCR method. It is able to promote the quick analysis of SNP in the fields of health monitor, disease precaution, and personalized diagnosis and treatment.

ASSOCIATION BETWEEN DIABETICS AND INTESTINAL CANCER WITH THE RISK OF MUTATION IN CD38 GENE IN IRANIAN POPULATION.

Intestinal cancer often occurs in type 2 diabetic patients. The concept of increasing insulin levels and insulin-like growth factor in the blood with type 2 diabetes are stimulated with the growth and depletion of cloned cell walls, and the continuation of this process leads to the cellular deformation. This is the evidence for intestinal cancer in type 2 diabetes in population. In this study, we aimed to find out the relationship between diabetics and intestinal cancer based on CD38 gene mutation. Samples were collected from 200 population including normal and case ones. PCR products related to rs 6449181 of CD38 gene was amplified with ARMS-PCR technique, and a 420-bp sharp banding was observed as well. According three ARMS-PCR techniques, three primers were designed by oligo7 software. Primers include F1, F2 and R (amplifying for normal, mutant and reverse primer respectively). This band was observed using a primer F1 that carries the wild type nucleotide using a primer, and when it is used with the F2 primer, it brings the mutant primer to populations of patients with diabetes and diabetes-cancer. In addition, the clinical results including body mass index, blood glucose and insulin level were analyzed. The means ±SD and Tuckey's post hoc test were significant between the clinical characterization parameters between cases and healthy populations. The allelic gene frequencies and Hardy-Weinberg equilibrium between nucleotides were evaluated, and the significant level between the alleles and gene frequencies was observed. In general, the current study found that there is a relationship between diabetes and intestinal cancer among the studied populations.

Extended Unpaired Loop-Oligonucleotide Improves Mutational Rates in Modified Kunkel Mutagenesis

A peptide Phage Display library was constructed using the BTK2 toxin as scaffold and rolling cycle amplification combined with Kunkel mutagenesis for rational diversification. During phage-display library construction, the persistence of wild type sequence in the library is a problem since prevents the achievement of highly diverse libraries, and may cause selection problems due to clonal expansion advantages of the wild type sequence over specific clones. Therefore, the assurance of 100% mutagenic primer incorporation during Kunkel reactions is of great impact for improved library construction strategies. In order to study improvements on oligo incorporation during Kunkel mutagenesis, we tested different mutagenic primers differing on the length of flanking annealing regions as well as the extension of mutagenic loop, which improved markedly the respective incorporation rates. In our studies, target diversification varied from 14 to 100% primer incorporation depending on specific primer features. Elongated loop encompassing the mutagenic region allowed diminished steric hindrance and complete annealing, which resulted in complete primer incorporation. Such technical advances for the production of fully diverse phage display libraries are crucial for the construction of powerful libraries granting the development of new and potent ligands of biologically important targets.

High-throughput Site-directed Scanning Mutagenesis Using a Two-fragment PCR Approach.

Site-directed scanning mutagenesis is a useful tool applied in studying protein function and designing proteins with new properties, such as increased stability or enzymatic activity. Creating a systematic library of hundreds of site-directed mutants is still a demanding and expensive task. The established protocols for making such libraries include PCR amplification of the recombinant DNA using a pair of primers carrying a target mutation in the same PCR. Unfortunately, this approach is very often coupled with PCR artifacts which compromise overall efficiency of site-directed mutagenesis. To reduce the failure rate due to the PCR artifacts, we have set up a high-throughput mutagenesis protocol based on a two-fragment PCR approach. To this end, each mutation is introduced in two separate PCRs resulting in two linear fragments of the mutated plasmid. In the next steps, the PCR template is digested and the two matching plasmid fragments are joined together using Gibson assembly. Separating the corresponding mutagenic primers into two different PCRs decreases a number of artifacts and thus increases overall cloning efficiency. Furthermore, free software that we developed facilitates both high-throughput primer design and analysis of sequencing results. Overall, this protocol enabled us to efficiently produce several alanine-scanning libraries of 400 single-point mutations with complete coverage of the protein sequence.

A Method for User-defined Mutagenesis by Integrating Oligo Pool Synthesis Technology with Nicking Mutagenesis

Saturation mutagenesis is a fundamental enabling technology for protein engineering and epitope mapping. Nicking mutagenesis (NM) allows the user to rapidly construct libraries of all possible single mutations in a target protein sequence from plasmid DNA in a one-pot procedure. Briefly, one strand of the plasmid DNA is degraded using a nicking restriction endonuclease and exonuclease treatment. Mutagenic primers encoding the desired mutations are annealed to the resulting circular single-stranded DNA, extended with high-fidelity polymerase, and ligated into covalently closed circular DNA by Taq DNA ligase. The heteroduplex DNA is resolved by selective degradation of the template strand. The complementary strand is synthesized and ligated, resulting in a library of mutated covalently closed circular plasmids. It was later shown that because very little primer is used in the procedure, resuspended oligo pools, which normally require amplification before use, can be used directly in the mutagenesis procedure. Because oligo pools can contain tens of thousands of unique oligos, this enables the construction of libraries of tens of thousands of user-defined mutations in a single-pot mutagenesis reaction, which significantly improves the utility of NM as described below. Use of oligo pools afford an economically advantageous approach to mutagenic experiments. First, oligo pool synthesis is much less expensive per nucleotide synthesized than conventional synthesis. Second, a mixed pool may be generated and used for mutagenesis of multiple different genes. To use the same oligo-pool for mutagenesis of a variety of genes, the user must only quantify the fraction of the oligo-pool specific to her mutagenic experiment and adjust the volume and effective concentration of the oligo-pool for use in nicking mutagenesis.

An Efficient Approach for Two Distal Point Site-Directed Mutagenesis from Randomly Ligated PCR Products.

Site-directed mutagenesis is one of the most important tools in molecular biology. The majority of the mutagenesis methods have been developed to mutate one region of target DNA in each cycle of mutagenesis, while in some cases there is a need to mutate several distal points. We used a new method to simultaneously mutate two distal points in the target DNA. Different regions of the target DNA were amplified in three separate PCR reactions. The PCR products were back-to-back and together they made the complete length of the template DNA. Mutations were introduced to PCR products by middle mutagenic primers. PCR products were mixed and ligated with random blunt ligation, and then the desired mutated DNA fragments were selected in two steps by flanking restriction enzyme digestion and size selection. Selected fragments were amplified in another PCR reaction using flanking primers and finally cloned into the plasmid vector. This mutagenesis process is simple, there is no need to use modified primers and long or difficult PCR reactions.