Muscle Architecture Properties Research Articles

Review of the methods used for calculating physiological cross-sectional area (PCSA) for ecological questions.

This review examines literature that used physiological cross-sectional area (PCSA) as a representative measure of an individual muscle's maximal isometric force production. PCSA is used to understand the muscle architecture and how a trade-off between muscle force and muscle contractile velocity reflect adaptations of the musculoskeletal system as a reflection of functional demands. Over the decades, methods have been developed to measure muscle volume, fascicle lengths, and pennation angle to calculate PCSA. The advantages and limitations of these methods (especially the inclusion/elimination of pennation angle) are discussed frequently; however, these method descriptions are scattered throughout the literature. Here, we reviewed and summarised the different approaches to collecting and recording muscle architectural properties to subsequently calculate PCSA. By critically discussing the advantages and limitations of each methodology, we aim to provide readers with an overview of repeatable methods to assess muscle architecture. This review may serve as a guide to facilitate readers searching for the appropriate techniques to calculate PCSA and measure muscle architecture to be applied in ecomorphology research. RESEARCH HIGHLIGHTS: Discuss the theories behind PCSA in a synthesised review to inform researchers about PCSA methodology.

Non-linear Scaling of Passive Mechanical Properties in Fibers, Bundles, Fascicles and Whole Rabbit Muscles.

Defining variations in skeletal muscle passive mechanical properties at different size scales ranging from single muscle fibers to whole muscles is required in order to understand passive muscle function. It is also of interest from a muscle structural point-of-view to identify the source(s) of passive tension that function at each scale. Thus, we measured passive mechanical properties of single fibers, fiber bundles, fascicles, and whole muscles in three architecturally diverse muscles from New Zealand White rabbits (n = 6) subjected to linear deformation. Passive modulus was quantified at sarcomere lengths across the muscle’s anatomical range. Titin molecular mass and collagen content were also quantified at each size scale, and whole muscle architectural properties were measured. Passive modulus increased non-linearly from fiber to whole muscle for all three muscles emphasizing extracellular sources of passive tension (p < 0.001), and was different among muscles (p < 0.001), with significant muscle by size-scale interaction, indicating quantitatively different scaling for each muscle (p < 0.001). These findings provide insight into the structural basis of passive tension and suggest that the extracellular matrix (ECM) is the dominant contributor to whole muscle and fascicle passive tension. They also demonstrate that caution should be used when inferring whole muscle properties from reduced muscle size preparations such as muscle biopsies.

Muscle internal structure revealed by contrast-enhanced μCT and fibre recognition: The hindlimb extensors of an arboreal and a fossorial squirrel

In individuals of similar body mass representing closely related species with different lifestyles, muscle architectural properties can be assumed to reflect adaptation to differing, lifestyle-related functional demands. We here employ a fibre recognition algorithm on contrast-enhanced micro-computed tomography (μCT) scans of one specimen each of an arboreal (Sciurus vulgaris) and a fossorial (Spermophilus citellus) sciuromorph rodent. The automated approach accounts for potential heterogeneity of architectural properties within a muscle by analysing all fascicles that compose a muscle. Muscle architectural properties (volume, fascicle length and orientation, and force-generating capacity) were quantified in 14 hindlimb (hip, knee, and ankle) extensor muscles and compared between specimens. We expected the arboreal squirrel to exhibit greater force-generating capacity and a greater capacity for length change allowing more powerful hindlimb extension. Generally and mostly matching our expectations, the S. vulgaris specimen had absolutely and relatively larger extensor muscles than the S. citellus specimen which were thus metabolically more expensive and demonstrate the relatively larger investment into powerful hindlimb extension necessary in the arboreal context. We conclude that detailed quantitative data on hindlimb muscle internal structure as was gathered here for a very limited sample further lends support to the notion that muscle architecture reflects adaptation to differential functional demands in closely related species with different locomotor behaviours and lifestyles.

Vastus Lateralis Architecture Changes During Pregnancy - A Longitudinal Study.

While the incidence of falls has been described to increase with pregnancy, the mechanism behind this is unclear. Pregnancy associated changes in lower extremity muscle strength could be a possible factor influencing injury risk. Thus, the aim of this longitudinal study was to investigate muscle strength and architectural properties of the lower limbs in different stages of pregnancy and postpartum. In nineteen pregnant women (30 ± 4 years) and fifteen non-pregnant controls (28 ± 4 years) muscle strength and architectural properties of the vastus lateralis muscle were assessed combining dynamometry, ultrasound, kinematic, and electromyographic measurements. Body mass and body composition were determined using bioimpedance analysis. In the pregnant women, the measurements were conducted in the 16 ± 4th (EP) and 29 ± 4th week of pregnancy (LP) as well as in the 32 ± 9th week postpartum (PP). Muscle thickness and pennation angle of the fascicles significantly increased at LP, while muscle strength remained constant during and after pregnancy. Body mass, skeletal muscle mass, fat mass, intracellular and extracellular water also peaked at LP. Postpartum values did not differ from the controls. Changes in the muscle properties were not related to changes in body mass and body composition. Conditions during pregnancy promote changes in the vastus lateralis architecture indicating muscle hypertrophy. However, pregnancy did not increase muscle strength while body mass progressively increases. Therefore, in the event of balance perturbations pregnant women may not be able to meet the requirements for the increased physical demand.

Effect of aging on muscle and tendon properties in highly functioning elderly people.

This study analyzes long‐term changes in muscle strength, muscle architecture, and patellar tendon mechanical properties in a specific sample of physically active elderly people. Twenty‐two participants were re‐examined from a former 12‐week‐long skiing intervention study: 11 from the intervention group (IG: 7 ♀, 4 ♂; 67 ± 3 years) and 11 from the control group (CG: 6 ♀, 5 ♂; 66 ± 4 years). Muscle architecture, strength endurance, maximum torque, and tendon properties were analyzed three times within 6 months, and again 6 years later in a follow‐up test. No changes in either group could be observed between June 2009 and April 2015 in any parameter. This can be interpreted positively because no age‐related decreases were found. Although our participants were physically active from the very beginning (>150 min/wk), it must be noted that the intensity of the physical activity was too low to provoke physiological improvements in leg strength or muscle/tendon morphology.

Mechanical similarity across ontogeny of digging muscles in an Australian marsupial (Isoodon fusciventer).

Many mammals dig, either during foraging to access subsurface food resources, or in creating burrows for shelter. Digging requires large forces produced by muscles and transmitted to the soil via the skeletal system; thus fossorial mammals tend to have characteristic modifications of the musculoskeletal system that reflect their digging ability. Bandicoots (Marsupialia: Peramelidae) scratch-dig mainly to source food, searching for subterranean food items including invertebrates, seeds, and fungi. They have musculoskeletal features for digging, including shortened, robust forelimb bones, large muscles, and enlarged muscle attachment areas. Here, we compared changes in the ontogenetic development of muscles associated with digging in the Quenda (Isoodon fusciventer). We measured muscle mass (m m ), pennation angle, and fiber length (FL) to calculate physiological cross-sectional area (PCSA; a proxy of maximum isometric force) as well as estimate the maximum isometric force (Fmax) for 34 individuals ranging in body size from 124 to 2,390 g. Males grow larger than females in this bandicoot species, however, we found negligible sex differences in mass-specific m m , PCSA or FL for our sample. Majority of the forelimb muscles PCSA showed a positive allometric relationship with total body mass, while m m and FL in the majority of forelimb muscles showed isometry. Mechanical similarity was tested, and two thirds of forelimb muscles maximum isometric forces (Fmax) scaled with isometry; therefore the forelimb is primarily mechanical similar throughout ontogeny. PCSA showed a significant difference between scaling slopes between main movers in the power stroke, and main movers of the recovery stroke of scratch-digging. This suggests that some forelimb muscles grow with positive allometry, specially these associated with the power stroke of digging. Intraspecific variation in PCSA is rarely considered in the literature, and thus this is an important study quantifying changes in muscle architectural properties with growth in a mammalian model of scratch-digging.

Passive changes in muscle length.

This review, the first in a series of minireviews on the passive mechanical properties of skeletal muscles, seeks to summarize what is known about the muscle deformations that allow relaxed muscles to lengthen and shorten. Most obviously, when a muscle lengthens, muscle fascicles elongate, but this is not the only mechanism by which muscles change their length. In pennate muscles, elongation of muscle fascicles is accompanied by changes in pennation and changes in fascicle curvature, both of which may contribute to changes in muscle length. The contributions of these mechanisms to change in muscle length are usually small under passive conditions. In very pennate muscles with long aponeuroses, fascicle shear could contribute substantially to changes in muscle length. Tendons experience moderate axial strains even under passive loads, and, because tendons are often much longer than muscle fibers, even moderate tendon strains may contribute substantially to changes in muscle length. Data obtained with new imaging techniques suggest that muscle fascicle and aponeurosis strains are highly nonuniform, but this is yet to be confirmed. The development, validation, and interpretation of continuum muscle models informed by rigorous measurements of muscle architecture and material properties should provide further insights into the mechanisms that allow relaxed muscles to lengthen and shorten.

Influence of full range of motion vs. equalized partial range of motion training on muscle architecture and mechanical properties.

The purpose of this study was to determine the effect of a 15-week partial range of motion (ROM) resistance training program on the vastus lateralis (VL) architecture and mechanical properties, when the time under tension (TUT) was equalized. Nineteen untrained male subjects were randomly assigned to a control (Control; n = 8) or training (TG; n = 11) group. In the TG, the dominant and nondominant legs were randomly selected to be trained with a full ROM (FULL) or a partial ROM (PART) in an isokinetic dynamometer. Training volume was equalized based on the TUT by manipulating sets and repetitions. The VL muscle architecture was assessed by B-mode ultrasonography at rest and during maximal isometric knee extension contractions (MVCs) at ten knee angles. The VL fascicle force and specific tension were calculated from the MVCs with superimposed stimuli, accounting for the moment arm length, muscle architecture, and antagonist coactivation. The FULL training induced changes in fascicle length (FL) (4.9 ± 2.0%, P < 0.001) and specific tension (25.8 ± 18.7%, P < 0.001). There was a moderate effect of PART training on the physiological cross-sectional area (PCSA) (7.8 ± 4.0%, P < 0.001, dav=0.6) and torque-angle adaptations (average increase 17.7 ± 3.9%, P < 0.05). These results provide evidence that crucial architectural and mechanical muscle adaptations are dependent on the ROM used in strength training. It seems that muscle FL and specific tension can be increased by pure concentric training if greater ROM is used. Conversely, restricting the ROM to shorter muscle lengths promotes a greater PCSA and angle-specific strength adaptations.

Quantification of Muscle Tissue Properties by Modeling the Statistics of Ultrasound Image Intensities Using a Mixture of Gamma Distributions in Children With and Without Cerebral Palsy.

To investigate whether quantitative ultrasound (US) imaging, based on the envelope statistics of the backscattered US signal, can describe muscle properties in typically developing children and those with cerebral palsy (CP). Radiofrequency US data were acquired from the rectus femoris muscle of children with CP (n = 22) and an age-matched cohort without CP (n = 14) at rest and during maximal voluntary isometric contraction. A mixture of gamma distributions was used to model the histogram of the echo intensities within a region of interest in the muscle. Muscle in CP had a heterogeneous echo texture that was significantly different from that in healthy controls (P < .001), with larger deviations from Rayleigh scattering. A mixture of 2 gamma distributions showed an excellent fit to the US intensity, and the shape and rate parameters were significantly different between CP and control groups (P < .05). The rate parameters for both the single gamma distribution and mixture of gamma distributions were significantly higher for contracted muscles compared to resting muscles, but there was no significant interaction between these factors (CP and muscle contraction) for a mixed-model analysis of variance. Ultrasound tissue characterization indicates a more disorganized architecture and increased echogenicity in muscles in CP, consistent with previously documented increases in fibrous infiltration and connective tissue changes in this population. Our results indicate that quantitative US can be used to objectively differentiate muscle architecture and tissue properties.

Muscle architectural properties in the common marmoset (Callithrix jacchus).

The common marmoset, Callithrix jacchus, is a small New World monkey that has recently gained attention as an important experimental animal model in the field of neuroscience as well in rehabilitative and regenerative medicine. This attention reflects the closer phylogenetic relationship between humans and common marmosets compared to that between humans and other experimental animals. When studying the neuronal mechanism behind various types of neurological motor disorders using the common marmoset, possible differences in muscle parameters (e.g., the force-generating capacity of each of the muscles) between the common marmoset and other animals must be taken into account to permit accurate interpretation of observed motor behavior. Differences in the muscle architectural properties are expected to affect biomechanics, and hence to affect neuronal control of body movements. Therefore, we dissected the forelimbs and hind limbs of two common marmosets, including systematic analysis of the muscle mass, fascicle length, and physiological cross-sectional area (PCSA). Comparisons of the mass fractions and PCSA fractions of the forelimb and hind limb musculature among the common marmoset, human, Japanese macaque, and domestic cat demonstrated that the overall muscle architectural properties of the forelimbs and hind limbs in the common marmoset are very similar to those of the Japanese macaque, a typical quadrupedal primate. However, muscle architectural properties of the common marmoset differ from those of the domestic cat, which has relatively larger hamstrings and pedal digital flexor muscles. Compared to humans, the common marmoset exhibits relatively smaller shoulder protractor, retractor, and abductor muscles and larger elbow extensor and rotator-cuff muscles in the forelimb, and smaller plantarflexor muscles in the hind limb. These differences in the muscle architectural properties must be taken into account when interpreting motor behaviors such as locomotion and arm-reaching movements in the common marmoset.

Development and validation of THUMS version 5 with 1D muscle models for active and passive automotive safety research.

Accurately predicting the occupant kinematics is critical to better understand the injury mechanisms during an automotive crash event. The objectives of this study were to develop and validate a finite element (FE) model of the human body integrated with an active muscle model called Total HUman Model for Safety (THUMS) version 5, which has the body size of the 50th percentile American adult male (AM50). This model is characterized by being able to generate a force owing to muscle tone and to predict the occupant response during an automotive crash event. Deformable materials were assigned to all body parts of THUMS model in order to evaluate the injury probabilities. Each muscle was modeled as a Hill-type muscle model with 800 muscle-tendon compartments of 1D truss and seatbelt elements covering whole joints in the neck, thorax, lumbar region, and upper and lower extremities. THUMS was validated against 36 series of post-mortem human surrogate (PMHS) and volunteer tests on frontal, lateral, and rear impacts. The muscle architectural and kinetic properties for the hip, knee, shoulder, and elbow joints were validated in terms of the moment arms and maximum isometric joint torques over a wide range of joint angles. The muscular moment arms and maximum joint torques estimated from THUMS occupant model with 1D muscles agreed with the experimental data for a wide range of joint angles. Therefore, this model has the potential to predict the occupant kinematics and injury outcomes considering appropriate human body motions associated with various human body postures, such as sitting or standing.

Muscle architecture and torque production in stroke survivors: an observational study

Objective: Spasticity poststroke leads to muscle weakness and soft tissue contracture, however, it is not clear how muscle properties change due this motor neural disorder. The purpose was to compare medial gastrocnemius muscle architecture and mechanical properties of the plantarflexor muscles between stroke survivors with spasticity and healthy subjects.Methods: The study included 15 stroke survivors with ankle spasticity and 15 healthy subjects. An isokinetic dynamometer was used for the evaluation of maximal isometric plantarflexor torque and images of the medial gastrocnemius muscle were obtained using ultrasonography. Images were collected at rest and during a maximum voluntary contraction.Results: The affected limb showed reduced fascicle excursion (0.9 ± 0.7 cm), shorter fascicle length, and reduced muscle thickness (0.095 ± 0.010% of leg length and 1.18 ± 0.20 cm, at rest) compared to contralateral (1.6 ± 0.4 cm, 0.106 ± 0.015% of leg length and 1.29 ± 0.24 cm, respectively) and to healthy participants (1.8 ± 0.7 cm, 0.121 ± 0.019% of leg length and 1.43 ± 0.22 cm, respectively). The contralateral limb showed lower force (between 32 and 40%) and similar architecture parameters compared to healthy participants.Conclusion: The affected limb had a different muscle architecture that appears to result in lower force production. The contralateral limb showed a decrease in force compared to healthy participants due to the other neural impairments than muscle morphology. Spasticity likely leds to adaptations of muscle architecture in the affected limb and in force reductions in both limbs of stroke survivors.

Comparison of Supraspinatus Muscle Architecture During Three Different Shoulder Strengthening Exercises Using Ultrasonography

Background: Strengthening the supraspinatus is an important aspect of a rehabilitation program for subacromial impingement and tendinopathy. Many authors recommended empty-can (EC), full-can (FC), and prone full-can (PFC) exercises to strengthen the supraspinatus. However, no ultrasonography study has yet investigated supraspinatus muscle architecture (muscle thickness; MT, pennation angle; PA, fiber bundle length; FBL) in relation to supraspinatus strengthening exercises. Objects: The purpose of this study was to compare the architecture (MT, PA, and FBL) of the supraspinatus muscle during three different types of exercises (EC, FC, and PFC) using diagnostic ultrasound. Methods: Participants performed three different exercises: (A) EC; the arm was maintained at 60° abduction with full internal rotation in the sitting position, (B) FC; the arm was maintained at 60° abduction with full external rotation in the sitting position, and (C) PFC; the arm was maintained at 60° abduction with full external rotation in the prone position. Ultrasonography was used to measure the MT, PA and FBL of the supraspinatus. One-way repeated analysis of variance with Bonferroni’s post-hoc test was used to compare between the three exercises and the initial position of each exercise. Results: Compared with each initial position, the FC exercise showed the greatest mean difference in muscle architecture properties and the PFC exercise showed the least mean difference. Conclusion: The findings suggest that the FC exercise position may have an advantage in increasing the amount of contractile tissue or producing muscle power and the PFC exercise position may be useful in a rehabilitation program because it offers the advantage of maintaining the muscle architecture properties.

Variety, sex and ontogenetic differences in the pelvic limb muscle architectural properties of leghorn chickens (Gallus gallus domesticus) and their links with locomotor performance.

Leghorn (layer) chickens (Gallus gallus domesticus) differ in locomotor morphology and performance due to artificial selection for standard (large) and bantam (small) varieties, sexual dimorphisms and ontogenetic stage. Here, the hind limb skeletal muscle architectural properties of mature and juvenile standard breeds and mature bantams are compared and linked to measures of locomotor performance. Mature males possessed greater relative muscle physiological cross-sectional areas (PCSAs) than their conspecific females, indicative of greater force-generating capacity, and in line with their greater maximum sustainable speeds compared with females. Furthermore, some of the relative fascicle lengths of the pennate muscles were greater in mature males than in mature females, which may permit greater muscle contractibility. Immature standard leghorns, however, did not share the same dimorphisms as their mature forms. The differences in architectural properties between immature and mature standard males indicate that with the onset of male sexual maturity, concomitant with increasing muscle mass in males, the relative fascicle lengths of pennate muscles and the relative PCSAs of the parallel-fibred muscles also increase. The age-related differences in standard breed male muscle architecture are linked to the presence and absence of sex differences in maximum aerobic speeds. Males of bantam and standard varieties shared similar muscle proportions (% body mass), but exhibited intrinsic muscle differences with a tendency for greater force-generating capabilities in bantams and greater contractile capabilities in standards. The metabolic costs associated with the longer fascicle lengths, together with more crouched limbs in standard than in bantam males may explain the lack of allometry in the minimum metabolic cost of transport between these birds of different size.

Triceps surae muscle-tendon properties in older endurance- and sprint-trained athletes.

Previous studies have shown that aging is associated with alterations in muscle architecture and tendon properties (Morse CI, Thom JM, Birch KM, Narici MV. Acta Physiol Scand 183: 291-298, 2005; Narici MV, Maganaris CN, Reeves ND, Capodaglio P. J Appl Physiol 95: 2229-2234, 2003; Stenroth L, Peltonen J, Cronin NJ, Sipila S, Finni T. J Appl Physiol 113: 1537-1544, 2012). However, the possible influence of different types of regular exercise loading on muscle architecture and tendon properties in older adults is poorly understood. To address this, triceps surae muscle-tendon properties were examined in older male endurance (OE, n = 10, age = 74.0 ± 2.8 yr) and sprint runners (OS, n = 10, age = 74.4 ± 2.8 yr), with an average of 42 yr of regular training experience, and compared with age-matched [older control (OC), n = 33, age = 74.8 ± 3.6 yr] and young untrained controls (YC, n = 18, age = 23.7 ± 2.0 yr). Compared with YC, Achilles tendon cross-sectional area (CSA) was 22% (P = 0.022), 45% (P = 0.001), and 71% (P < 0.001) larger in OC, OE, and OS, respectively. Among older groups, OS had significantly larger tendon CSA compared with OC (P = 0.033). No significant between-group differences were observed in Achilles tendon stiffness. In older groups, Young's modulus was 31-44%, and maximal tendon stress 44-55% lower, than in YC (P ≤ 0.001). OE showed shorter soleus fascicle length than both OC (P < 0.05) and YC (P < 0.05). These data suggest that long-term running does not counteract the previously reported age-related increase in tendon CSA, but, instead, may have an additive effect. The greatest Achilles tendon CSA was observed in OS followed by OE and OC, suggesting that adaptation to running exercise is loading intensity dependent. Achilles tendon stiffness was maintained in older groups, even though all older groups displayed larger tendon CSA and lower tendon Young's modulus. Shorter soleus muscle fascicles in OE runners may be an adaptation to life-long endurance running.

Reliability of 2D ultrasound imaging associated with transient ShearWave Elastography method to analyze spastic gastrocnemius medialis muscle architecture and viscoelastic properties

The aim of the study was to assess the reliability of pennation angle (PA) and muscle thickness (MT) 2D measurements and of shear elastic modulus measurement, using ultrasound imaging (US). Those measurements were made on spastic gastrocnemius medialis muscle at rest and at maximal passive stretching, in post-stroke hemiplegic patients. The paretic side measurements were compared to non-paretic side. Fourteen patients took part in 2 inter-session reliability experiments, realized at a 7 days interval by the same operator. The Aixplorer ® Supersonic US scanner with the transient ShearWave Elastography (SWE) software was used. The stretching experiments were made manually and controlled by a goniometer. The reliability of the 2D measurements was good. The coefficient of variation (CV) was 6.30% for MT measurement at rest, 6.40% and 8.26% for PA at rest and at maximal passive stretching respectively. The reliability of the shear elastic modulus measurement in the sagittal plane was good only at rest with a CV of 9.86%, versus 40.58% at stretching. None of the shear elastic modulus measurements in the axial plane were good. At rest, MT and PA were weaker on the paretic side (14.25 ± 3.12 mm and 17.32 ± 5.10°) versus non-paretic side (16.30 ± 3.19 mm and 21.08 ± 5.05°) ( P < 0.0001 and P = 0.006). At rest, there was a small difference in the shear elastic modulus between the paretic side and the non-paretic side (5.40 ± 1.67 kPa versus 6.20 ± 2.18 kPa, P = 0.041). This is the first description of muscle spastic structure using SWE with Supersonic Shear Imaging. 2D US associated with SWE shows promise in terms of muscular atrophy quantification and muscle histological quality assessment. These structural properties reflect some of the functional abilities regardless of motor control. It should enable further research on therapies, which impact muscle tissue quality, such as botulinum neurotoxin injections.

Development of a phantom mimicking the functional and structural behaviors of the thigh muscles characterized with magnetic resonance elastography technique.

Magnetic Resonance Elastography (MRE) is a non invasive technique based on the propagation of shear waves in soft tissues providing the quantification of the mechanical properties [1]. MRE was successfully applied to healthy and pathological muscles. However, the MRE muscle methods must be further improved to characterize the deep muscles. A way will be to develop phantom mimicking the muscle behavior in order to set up new MRE protocol. Thus, the purpose of this study is to create a phantom composed of a similar skeletal muscle architecture (fiber, aponorosis) and equivalent elastic properties as a function of the muscle state (passive or active). Two homogeneous phantoms were manufactured with different concentrations of plastisol to simulate the elastic properties in relaxed (50% of plastisol) and contracted (70% of plastisol) muscle conditions. Moreover, teflon tubing pipes (D = 0.9 mm) were thread in the upper part of the phantom (50%) to represent the muscle fibers and a plastic sheet (8 × 15 cm) was also included in the middle of the phantom to mimic the aponeurosis structure. Subsequently, MRE tests were performed with two different pneumatic drivers, tube and round, (f = 90Hz) to analyze the effect of the type of driver on the wave propagation. Then, the wavelength was measured from the phase images to obtain the elastic properties (shear modulus). Both phantoms revealed elastic properties which were in the same range as in vivo muscle in passive (μ(50%) = 2.40 ± 0.18 kPa ) and active (6.24 ± 0.21 kPa) states. The impact of the type of driver showed higher values (about 1.2kPa) with the tube. The analysis of the wave behavior revealed a sliding along the plastic sheet as it was observed for in vivo muscle study. The wave was also sensitive to the presence of the fibers where gaps were identified. The present study demonstrates the ability of the phantom to mimic the structural and functional properties of the muscle.

Three-Dimensional Muscle Architecture and Comprehensive Dynamic Properties of Rabbit Gastrocnemius, Plantaris and Soleus: Input for Simulation Studies.

The vastly increasing number of neuro-muscular simulation studies (with increasing numbers of muscles used per simulation) is in sharp contrast to a narrow database of necessary muscle parameters. Simulation results depend heavily on rough parameter estimates often obtained by scaling of one muscle parameter set. However, in vivo muscles differ in their individual properties and architecture. Here we provide a comprehensive dataset of dynamic (n = 6 per muscle) and geometric (three-dimensional architecture, n = 3 per muscle) muscle properties of the rabbit calf muscles gastrocnemius, plantaris, and soleus. For completeness we provide the dynamic muscle properties for further important shank muscles (flexor digitorum longus, extensor digitorum longus, and tibialis anterior; n = 1 per muscle). Maximum shortening velocity (normalized to optimal fiber length) of the gastrocnemius is about twice that of soleus, while plantaris showed an intermediate value. The force-velocity relation is similar for gastrocnemius and plantaris but is much more bent for the soleus. Although the muscles vary greatly in their three-dimensional architecture their mean pennation angle and normalized force-length relationships are almost similar. Forces of the muscles were enhanced in the isometric phase following stretching and were depressed following shortening compared to the corresponding isometric forces. While the enhancement was independent of the ramp velocity, the depression was inversely related to the ramp velocity. The lowest effect strength for soleus supports the idea that these effects adapt to muscle function. The careful acquisition of typical dynamical parameters (e.g. force-length and force-velocity relations, force elongation relations of passive components), enhancement and depression effects, and 3D muscle architecture of calf muscles provides valuable comprehensive datasets for e.g. simulations with neuro-muscular models, development of more realistic muscle models, or simulation of muscle packages.

Plantarflexor Muscle-Tendon Properties are Associated With Mobility in Healthy Older Adults.

Muscle mass, strength, and power are known determinants of mobility in older adults but there is limited knowledge on the influence of muscle architecture or tendon properties on mobility. The purpose of this study was to examine the relationship between mobility and plantarflexor muscle-tendon properties in healthy older adults. A total of 52 subjects (age 70-81 years) were measured for 6-minute walk test (6MWT), timed "up and go"-test (TUG), isometric plantarflexion strength, Achilles tendon stiffness, triceps surae muscle architecture, lower extremity lean mass, isometric leg extension strength, and leg extension power. Partial correlations and multivariate regression models adjusted for sex, age, body mass, and height were used to examine the relationship between mobility (6MWT and TUG) and lower limb muscle-tendon properties. Multivariate regression models revealed that Achilles tendon stiffness (p = .020), plantarflexion strength (p = .022), and medial gastrocnemius fascicle length (p = .046) were independently associated with 6MWT. Plantarflexion strength (p = .037) and soleus fascicle length (p = .031) were independently associated with TUG. Plantarflexor muscle-tendon properties were associated with mobility in older adults independent of lower extremity lean mass, leg extension strength, or power. Plantarflexion strength was a stronger predictor of mobility than leg extension strength or power. The novel finding of this study was that muscle architecture and tendon properties explained interindividual differences in mobility. This study highlights the importance of the plantarflexors for mobility in older adults and provides understanding of possible mechanisms of age-related decline in mobility.

Aberrant back muscle function correlates with intramuscular architecture of dorsovertebral muscles in two-toed sloths

Sloths are morphologically specialized in upside-down quadrupedal suspensory locomotion. The evolution of this locomotor mode lead to a loss of asymmetrical gaits and thus a reduced necessity of powerful extension of the spine in the sagittal plane. It is here tested whether this aberrant locomotor mode is reflected in the three-dimensional (3D) intramuscular architecture of the dorsovertebral muscles of the two-toed sloth. Layer wise dissection of the transversospinal system, the longissimus, and the iliocostalis allowed for the 3D digitization of individual muscle fascicles. Fascicle length and orientation is quantified, and anatomical cross sectional area and muscle volume is calculated. Moment arms of the dorsovertebral muscles to the intervertebral joints are determined. Architectural properties of the dorsovertebral muscles in the sloth are in agreement with previous kinematic studies and in contrast to hitherto sampled upright quadrupedal mammals. The agreement of architectural properties with in vivo function documented in this study further characterizes the specific functional morphology of sloths, but also suggests a close relationship of back muscle architectural properties with locomotor mode of mammals in general.