Multi-wavelength Light Source Research Articles

Multi-wavelength second-harmonic generation in a double-clad high nonlinear fiber induced by multiple phase-matching.

In this study, multi-wavelength second-harmonic generation (SHG) based on self-phase modulation (SPM) broadband supercontinuum (SC) was observed by employing a double-clad high nonlinear optical fiber (HNLF) in conjunction with a femtosecond laser. At a wavelength of 1050 nm and an average pump power of 320 mW, multiple phase-matching conditions were achieved, and SH signals of central wavelengths ∼530.7 nm, ∼525.1 nm, ∼503.5 nm, and ∼478.7 nm were observed, with SHG efficiency reaching ∼1.34 × 10-4. The SHG in this experiment can be attributed to the utilization of a doped optical fiber, where dopants create defect states, facilitating optical-chemical transformation and enhancing second-order polarization susceptibility. Additionally, theoretical simulations were conducted, aligning closely with the experimental findings. To the best of our knowledge, this work marks the first demonstration of multi-wavelength SHG in optical fibers. It offers a distinctive avenue for customizing multi-wavelength ultrafast light sources, exhibiting great application potential in the fields of medical diagnostics and optical sensing.

Compact High-Resolution Multi-Wavelength LED Light Source for Eye Stimulation

Eye stimulation research plays a critical role in advancing our understanding of visual processing and developing new therapies for visual impairments. Despite its importance, researchers and clinicians still face challenges with the availability of cost-effective, precise, and versatile tools for conducting these studies. Therefore, this study introduces a high-resolution, compact, and budget-friendly multi-wavelength LED light source tailored for precise and versatile eye stimulation, addressing the aforementioned needs in medical research and visual science. Accommodating standard 3 mm or 5 mm package LEDs, the system boasts broad compatibility, while its integration with any microcontroller capable of PWM generation and supporting SPI and UART communication ensures adaptability across diverse applications. Operating at high resolution (18 bits or more) with great linearity, the LED light source offers nuanced control for sophisticated eye stimulation protocols. The simple 3D printable optical design allows the coupling of up to seven different wavelengths while ensuring the cost-effectiveness of the device. The system’s output has been designed to be fiber-coupled with standard SMA connectors to be compatible with most solutions. The proposed implementation significantly undercuts the cost of commercially available solutions, providing a viable, budget-friendly option for advancing eye stimulation research.

Phase Retrieval Algorithm for Surface Topography Measurement Using Multi-Wavelength Scattering Spectroscopy

We are currently developing a high-precision and wide-range in-process surface topography measurement system using the laser inverse scattering method. In the laser inverse scattering method, a monochromatic plane wave is illuminated perpendicular to the target surface and the surface topography is measured by retrieving the phase distribution of the reflected light. However, the dynamic range of this method is limited to the sub-micrometer range because of phase wrapping during phase retrieval. In this paper, we propose a laser inverse scattering method using a multi-wavelength light source based on the fact that the phase of light is inversely proportional to the wavelength with the propagation distance as a coefficient. We also constructed a surface profilometer based on the proposed method and measured the profile of a single rectangular groove with a width of 50 µm and a depth of 2 µm. The dimensions of the measured profiles agree well with the nominal dimensions of the rectangular groove.

Towards 2-μm comb light source based on multiple four-wave mixing in a dual-frequency Brillouin fiber laser

In this study, we report the generation of multi-wavelength light sources through enhanced four-wave-mixing processes using a straightforward and adaptable dual-frequency Brillouin fiber laser. This passive optical and nonreciprocal cavity is first tested and analyzed with long fiber lengths up to 1 km in the 1.55 μm telecommunication C band and then in the 2-μm waveband. In the latter case, we demonstrate that our fiber cavity enables efficient multiple four-wave mixings, in the continuous-wave regime, which are commonly inaccessible in long silica-fibers due to increased losses. We also report on the tunable repetition rate from tens of GHz to hundreds of GHz, by simply changing the frequency spacing between the two continuous-wave pumps. The coherence limitations of our all-fiber system are discussed, along with the impact of the dispersion regime of the nonlinear fiber that forms the cavity.

RF Frequency Selective Switch by Multiple PMIM Conversions

Nowadays, broadband and multi-channel radio frequency (RF) processing has been widely used in communication, radar, countermeasure, and other applications. At present, multiple-input and multiple-output (MIMO)-oriented microwave photonic signal processing technology is relatively scarce, so this paper proposes an RF frequency selective switch (FSS) based on multiple phase modulation to intensity modulation (PMIM) conversions. PMIM conversion has been used in narrowband microwave photonic filtering in the past. We extend it to a wideband and arbitrarily reconfigurable RF spectrum processing unit through an optical frequency comb and periodic optical filter. Although we use the incoherent combination of a multi-wavelength light source, we can obtain any frequency response including rectangles only by using all positive tap coefficients. Using an optical wavelength selective switch (WSS), we obtain RF FSS, and the spectral resolution of RF FSS is much better than that of optical WSS, which is improved by more than two orders of magnitude. The above principles, including single-channel reconfigurable filtering and multi-channel RF FSS, are verified by experiments. Our technology provides a stable solution for future RF MIMO signal processing.

Multi-wavelength injection locked semiconductor comb laser

Quantum dot lasers on silicon have gained significant interest over the past decade due to their great potential as an on-chip silicon photonic light source. Here, we demonstrate multi-wavelength injection locking of InAs/GaAs quantum dot Fabry–Perot (FP) lasers both on GaAs and silicon substrates by optical self-injection via an external cavity. The number of locked laser modes can be adjusted from a single peak to multiple peaks by tuning wavelength dependent phase and mode spacing of back-injected light through a Lyot filter. The multi-wavelength injection locked laser modes exhibit average optical linewidth of ∼ 20 kHz , which are narrowed by approximately three orders of magnitude from their free-running condition. Furthermore, multi-wavelength self-injection locking via an external cavity exhibits flat-top optical spectral properties with approximately 30 stably locked channels under stable operation over time, where the frequency detuning is less than 700 MHz within 40 min. Particularly, FP lasers by direct epitaxial growth on silicon substrates are self-injection locked as a flat-top comb source with tunable free spectral range from approximately 25 to 700 GHz. The reported results emphasize the great potential of multi-wavelength injection locked lasers as tunable on-chip multi-wavelength light sources.

Multi-wavelength emission through self-induced defects in GaZnO microrods

Multi-wavelength emission in wide bandgap semiconductors is commonly achieved through ternary alloying or quantum size effects. However, multi-wavelength emission within a single microstructure is highly challenging using these approaches. Here, we demonstrate that the luminescence wavelength within individual GaZnO microrods can be tailored via defect engineering. Fast chemical vapor growth of oxygen-rich ZnO microrods with Ga2O3 as an additive in the ZnO vapour leads to formation of a tapered morphology with graded distribution of Ga dopants, while the Ga incorporation does not significantly alter their crystal structure. With increasing Ga content from 1 to 6 at% from tip to base, the GaZnO microrods increase in diameter towards the substrate in accordance with the birth-and-spread mechanism. The local near-band-edge emission within single ZnO microrods, analyzed by nanoscale cathodoluminescence spectroscopy, exhibits a red shift of ~0.6 eV with increasing Ga content and exhibits signature characteristics of an excitonic emission. Density Functional Theory calculations reveal that the variation in the emission wavelength arises from bandgap narrowing due to the merging of the electronic states of Ga defect complexes with ZnO energy bands. The experimental and theoretical results demonstrate (i) the utility of using the self-regulation of defect compensation effects for band gap engineering and (ii) the possibility of multi-wavelength light sources within individual microrods.

Design of Broadband Flat Optical Frequency Comb Based on Cascaded Sign-Alternated Dispersion Tellurite Microstructure Fiber.

We designed a tellurite microstructure fiber (TMF) and proposed a broadband optical frequency comb generation scheme that was based on electro-optical modulation and cascaded sign-alternated dispersion TMF (CSAD-TMF). In addition, the influence of different nonlinear effects, the ultrashort pulse evolution in the CSAD-TMF with the anomalous dispersion (AD) zones and the normal dispersion (ND) zones were analyzed based on the generalized nonlinear Schrodinger equations (GNLSE) modelling. According to the simulations, when the input seed comb had a repetition rate of 20 GHz and had an input pulse peak power of 30 W, the generation scheme could generate optical frequency combs with a 6 dB spectral bandwidth spanning over 170 nm centered at 1550 nm. Furthermore, the generated combs showed good coherence in performance over the whole 6 dB spectral bandwidth. The highly coherent optical frequency combs can be used as high-repetition-rate, multi-wavelength light sources for various integrated microwave photonics and ultrafast optical signal processing applications.

Numerical investigations on the cascaded high harmonic and quasi-supercontinuum generations in epsilon-near-zero aluminum-doped zinc oxide nanolayers

The cascaded high harmonic generations (HHG) and quasi-supercontinuum (quasi-SC) generations by epsilon-near-zero (ENZ) aluminum-doped zinc oxide (AZO) nanolayers are demonstrated numerically. Due to AZO’s high second- and third-order nonlinear responses, the ENZ AZO nanolayer is capable of generating high harmonic waves up to the 15th order under the excitation of a pico- or femtosecond laser source. The conversion efficiencies for the third, fifth, and seventh harmonic generations, estimated by the ratio of the spectral peak power, are in theory, comparable with the experimental results of ENZ indium tin oxide and indium-doped cadmium oxide. By broadening HHG peaks, the quasi-SC generation in nanolayers with different thickness is discussed. The results of this work might be useful in designing nanoscale multiwavelength light sources.

Development of a real-time spectral imaging system using in-site micro-LED-based illumination and high-speed micro-camera for endoscopic applications.

We designed a compact, real-time LED-based endoscopic imaging system for the detection of various diseases including cancer. In gastrointestinal applications, conventional endoscopy cannot reliably differentiate tumor from normal tissue. Current hyperspectral imaging systems are too slow to be used for real-time endoscopic applications. We are investigating real-time spectral imaging for different tissue types. Our objective is to develop a catheter for real-time hyperspectral gastrointestinal endoscopy. The endoscope uses multiple wavelengths within UV, visible, and IR light spectra generated by a micro-LED array. We capture images with a monochrome micro camera, which is cost-effective and smaller than the current hyperspectral imagers. A wireless transceiver sends the captured images to a workstation for further processing, such as tumor detection. The spatial resolution of the system is defined by camera resolution and the distance to the object, while the number of LEDs in the multi-wavelength light source determines the spectral resolution. To investigate the properties and the limitations of our high-speed spectral imaging approach, we designed a prototype system. We conducted two experiments to measure the optimal forward voltages and lighting duration of the LEDs. These factors affect the maximum feasible imaging rate and resolution. The lighting duration of each LED can be shorter than 10 ms while producing an image with a high signal-to-noise ratio and no illumination interference. These results support the idea of using a high-speed camera and an LED-array for real-time hyperspectral endoscopic imaging.

Application of multi-wavelength light source to micro welding inspection

We have developed a multi-wavelength light source and apply it to micro welding inspection. We project light rays from multiple white light super bright LEDs on a reflection grating. These LEDS are mounted on the specific position to give the diffracted ray with the wavelength range from 480 to 680 nm. The diffracted ray is pass to an optical fibre. The orientation of fibre tube is fixed so diffracted light from each LED will give a specific wavelength. The bandwidths of lights from all LEDS are quite narrow (< 50 nm), which is possible to be used as a light source for multi-wavelength imaging. The diffracted light is transported via optical fibre to a microscope used to inspect the micro welding points on a microelectronics circuit. Due to its very small size, the welding defects are hard to detected, even with high intensity white light. We find that, for typical welding points, the light with wavelength 500 to 600 nm can significantly enhance the contrast of welding image. This agree well with our preliminary result that, with our RGB light source, the maximum contrast can be obtained with the green - yellow to orange - red light. We expect our results to be useful to the inspection of micro welding, especially when integrated to some automation, e.g. machine vision system.

Frequency comb distillation for optical superchannel transmission

Optical frequency combs can potentially provide an efficient light source for multi-terabit-per-second optical superchannels. However, as the bandwidth of these multi-wavelength light sources is increased, it can result in low per-line power. Optical amplifiers can be used to overcome power limitations, but the accompanying spontaneous optical noise can degrade performance in optical systems. To overcome this, we demonstrate wideband noise reduction for comb lines using a high-Q microring resonator whose resonances align with the comb lines, providing tight optical filtering of multiple combs lines at the same time. By distilling an optical frequency comb in this way, we are able to reduce the required comb line OSNR when these lines are used in a coherent optical communications system. Through performance tests on a 19.45-GHz-spaced comb generating 71 lines, using 18 Gbaud, 64-QAM sub-channels at a spectral efficiency of 10.6 b/s/Hz, we find that noise-corrupted comb lines can reduce the optical signal-to-noise ratio required for the comb by ~ 9 dB when used as optical carriers at the transmitter side, and by ~ 12 dB when used as a local oscillator at the receiver side. This demonstration provides a method to enable low power optical frequency combs to be able to support high bandwidth and high-capacity communications.

External vs. Integrated Light Sources for Intra-Data Center Co-Packaged Optical Interfaces

Co-packaging of optics and electronics for data center switches has been proposed to reduce system-level power consumption by minimizing power-hungry electrical interconnects. Co-packaging optical components near high-temperature electronics, however, can diminish their performance and reliability. Moreover, limitations of the switch environment, such as restricted footprint, power, and number of fiber attachments can limit practical co-packaging implementations. Here, we study four architectures for co-packaged optical interfaces using either single- or multi-wavelength light sources that can be either external to or integrated with the optical interfaces. We model the temperature- and current-dependent performance and reliability of the sources and calculate the link budget for switch bandwidths up to 102.4 Tb/s. We compare architectures based on coherent and direct detection and find that all coherent detection architectures support 102.4 Tb/s switching with over 13 dB link budget, while most direct detection architectures scale to 51.2 Tb/s or 102.4 Tb/s switching with link budgets less than 5 dB. In addition, we demonstrate that external-source architectures require wavelength-division multiplexing at lower switch bandwidths and consequently have link budgets 1-5 dB lower than integrated source architectures. Further, we demonstrate that higher-power lasers can scale external architectures to 102.4 Tb/s switching with over 4 dB link budgets. Finally, for 51.2 Tb/s switching, we show that a reduction in integrated source temperature improves link budgets by 2-4 dB and direct detection external-source architectures can achieve greater than 5 dB link budget with fewer than 300 fiber attachments.

Compact full-color holographic 3-D display based on undersampled computer-generated holograms and oblique projection imaging.

A compact full-color electro-holographic three-dimensional (3-D) display with undersampled computer-generated holograms (US-CGHs) and oblique projection imaging (OPI) is proposed. For its realization, undersampling conditions of the CGH enabling the complete recovery of image information are derived, and the OPI-based longitudinal-to-lateral depth conversion (LTL-DC) scheme allowing the simple reconstruction of full-color images is also proposed. Three-color off-axis US-CGHs are generated with their center-shifted principle fringe patterns (CS-PFPs) of the novel look-up table (NLUT) method, where center-shifts are calculated with the derived undersampling conditions of the CGH based on the generalized sampling theorem, and then multiplexed into the color-multiplexed hologram (CMH). The CMH is loaded on a SLM (spatial light modulator) and reconstructed by being illuminated with a multi-wavelength light source, where an original full-color image is reconstructed being spatially separated from the other color-dispersed images on the projected image plane with the OPI-based LTL-DC process, which enables us to view the original full-color image just with a simple filter mask. Performance analysis and successful experiments with the test 3-D objects in motion confirm the feasibility of the proposed system.

Supercontinuum-induced multi-wavelength third-harmonic generation in a suspended-core microstructured optical fiber.

In this paper, we reported a multi-wavelength third-harmonic generation (THG) induced by supercontinuum (SC) in an in-house fabricated suspended-core microstructured optical fiber (MOF). The adjustment of pump wavelength and pump power exerted an influence on SC which simultaneously emitted third harmonic (TH) waves in the visible light range. At the pump wavelength of 1220 nm and the average pump power of 450 mW, a multi-wavelength TH spectrum (373∼589 nm) with over twenty distinct peaks was observed under the phase matching (PM) condition between the fundamental mode and the higher-order modes. To the best of our knowledge, this is the first report on THG in optical fibers with so great a number of wavelengths. The maximal THG conversion efficiency ∼6.791 × 10-4 was obtained at 1480 nm, 350 mW, which is highly competitive compared with the values reported previously. Furthermore, theoretical simulation has been carried out, which corresponded well with the experimental observation. This multi-wavelength THG in the suspended-core MOF may provide a unique pathway towards tailored multi-wavelength ultrafast light sources for applications in sensing and imaging technologies.

Multi-wavelength random fiber laser with switchable wavelength interval.

A random fiber laser with flexible wavelength interval switching is proposed and demonstrated through two switching methods. One is to change the effective structure of the laser cavity by controlling the switches of 980 nm pump laser diodes (LDs) for erbium-doped fibers (EDFs), which can achieve the switching of the wavelength interval from a single Brillouin frequency shift (BFS) of 0.088 nm to a double BFS of 0.176 nm. Another method is to manipulate the gain provided by the two EDF amplifiers by controlling the power of the three 980 nm LDs, thereby realizing the optical switching of the wavelength interval. This kind of wavelength interval switchable random fiber laser increases the flexibility and functionality of multi-wavelength light sources, and further expands the application range of the random fiber lasers. Furthermore, the alternative wavelength interval switching mechanisms with simple structure enable it to meet the application requirements of various occasions.

Theoretical and Experimental Analysis of Protoporphyrin IX Photodegradation Using Multi-Wavelength Light Sources.

Photodynamic procedures have been used in many applications, ranging from cancer treatment to microorganism inactivation. Photodynamic reactions start with the activation of a photosensitizing molecule with light, leading to the production of cytotoxic molecules that promote cell death. However, establishing the correct light and photosensitizer dosimetry for a broadband light source remains challenging. In this study, we proposed a theoretical mathematical model for the photodegradation of protoporphyrin IX (PpIX), when irradiated by multi-wavelength light sources. The theoretical model predicts the experimental photobleaching (temporal change in PpIX concentration) of PpIX for different light sources. We showed that photobleaching occurs independently of the light source wavelengths but instead depends only on the number of absorbed photons. The model presented here can be used as an important mathematical approach to better understand current photodynamic therapy protocols and help achieve optimization of the doses delivered.

Pump-controlled wavelength switchable dissipative soliton mode-locked Yb-doped fiber laser using a 45° tilted fiber grating

We demonstrate a pump-controlled wavelength switchable Yb-doped fiber laser (YDFL) by nonlinear polarization rotation (NPR) for the first time. The polarizer replaced by a 45° tilted fiber grating (45°-TFG) combines with a section of polarization maintaining fiber (PMF) to form a fiber-based birefringent filter. Stable dissipative soliton (DS) with center wavelength of 1068.39 nm is generated under the mode-locked threshold of 277 mW. The operating wavelength switching between 1046.51 nm and 1067.90 nm can be realized via increasing the pump power simply while keeping the polarization controllers (PCs) in a fixed state. The laser maintains stable mode-locking operation at each wavelength, which can be regarded as a type of multi-wavelength ultrafast light source with precise control and integration potential.

32QAM WDM transmission at 12 Tbit/s using a quantum-dash mode-locked laser diode (QD-MLLD) with external-cavity feedback.

Chip-scale frequency comb generators lend themselves as multi-wavelength light sources in highly scalable wavelength-division multiplexing (WDM) transmitters and coherent receivers. Among different options, quantum-dash (QD) mode-locked laser diodes (MLLD) stand out due to their compactness and simple operation along with the ability to provide a flat and broadband comb spectrum with dozens of equally spaced optical tones. However, the devices suffer from strong phase noise, which impairs transmission performance of coherent links, in particular when higher-order modulation formats are to be used. Here we exploit coherent feedback from an external cavity to drastically reduce the phase noise of QD-MLLD tones, thereby greatly improving the transmission performance. In our experiments, we demonstrate 32QAM WDM transmission on 60 carriers derived from a single QD-MLLD, leading to an aggregate line rate (net data rate) of 12 Tbit/s (11.215 Tbit/s) at a net spectral efficiency (SE) of 7.5 bit/s/Hz. To the best of our knowledge, this is the first time that a QD-MLLD optical frequency comb has been used to transmit an optical 32QAM signal. Based on our experimental findings, we perform simulations that show that feedback-stabilized QD-MLLD should also support 64QAM transmission with a performance close to the theoretical optimum across a wide range of technically relevant symbol rates.

Single-/dual-pulse repetition rate variable supercontinuum light source with peak wavelength around 1.7 µm using a modulated pump.

A single-/dual-pulse repetition rate variable supercontinuum (SC) light source (SLS) with a peak wavelength of around 1.7 µm (SLS around 1.7 µm) is proposed and experimentally demonstrated. In our scheme, a 1.5 µm modulated pump source included a laser and an intensity modulator (IM). The pump source can generate pulse trains with different repetitions and pulse durations. A 1 km high nonlinear fiber (HNLF) was used as the nonlinear gain medium. A picosecond-pulsed SC signal was obtained by pumping the HNLF, and a wavelength division multiplexer was used for filtering residual pump. Additionally, a Sagnac loop was applied to create a multiwavelength pulse SC light source. The generated SC source covered from 1.59 to 1.96 µm, and its peak wavelength was around 1.7 µm. The single-/dual-pulse train can be produced and switched by adjusting the direct current bias and radio frequency driving voltages of the input signal to the IM. When the repetition rate of the generated pulse train was between 170 MHz and 2 GHz, the pulse duration of the dual-pulse train was between 60 ps and 180 ps. Additionally, the duty cycle of the dual-pulse operation was 40%. The single pulse SLS, around 1.7 µm, can be a choice to improve optical coherence tomography (OCT) performance, and the dual-pulse source will be a reference for laser drilling applications.