Multispectral Scanner Data Research Articles

New techniques for old fires: Using deep learning to augment fire maps from the early satellite era

Disturbances such as fire play a critical role in forest ecosystems. However, anthropogenic fires can profoundly impact forests to the point of destabilizing ecosystems. In addition, fires have legacy effects on environments which may be observed in forests for decades after the fire is extinguished. Thus, understanding the extent of historic fires in a landscape is vital to understanding current forest structure and ecological processes (e.g., carbon sequestration capacity and provision of habitat) and, therefore, essential for informing land-management decisions. However, little work has been done to map forest fires pre 1980s due to the challenges of interpreting imagery from the 1970s-era Landsat Multispectral Scanner (MSS) platform. MSS imagery is distinguished from recent satellite missions through lower temporal, spatial, and spectral resolutions. Recent advances in image processing have brought the goal of high-quality MSS classifications within reach. In this study, we use deep learning, specifically UNet (a fully convolutional neural network (CNN)), to detect historic forest fires in MSS imagery for the forest-dominated regions of Quebec, Canada. While other studies have applied deep learning to present-day satellite data for land cover classification, hardly any work has specifically applied deep learning to MSS data for fire detection. We trained our UNet model on 206 MSS images that were labelled by applying thresholds to the Burned Area Index inside polygons drawn by the authors around burned areas. We then used the trained model to label burns in 5104 MSS images that were compiled to generate annual burned area maps. Our results identified (with a 95% confidence interval) 3503.95 ± 484.90 km2 of burns not previously reported in any database; this represents a 35.30 ± 3.94% increase in the total known burned area across the forest-dominated regions of Quebec between 1973 and 1982.

Inconsistency among Landsat Sensors in Land Surface Mapping: A Comprehensive Investigation Based on Simulation

Comprehensive investigations on the between-sensor comparability among Landsat sensors have been relatively limited compared with the increasing use of multi-temporal Landsat records in time series analyses. More seriously, the sensor-related difference has not always been considered in applications. Accordingly, comparisons were conducted among all Landsat sensors available currently, including Multispectral Scanner (MSS), Thematic Mappers (TM), Enhanced Thematic Mappers (ETM+), and Operational Land Imager (OLI)) in land cover mapping, based on a collection of synthesized, multispectral data. Compared to TM, OLI showed obvious between-sensor differences in channel reflectance, especially over the near infrared (NIR) and shortwave infrared (SWIR) channels, and presented positive bias in vegetation spectral indices. OLI did not always outperform TM and ETM+ in classification, which related to the methods used. Furthermore, the channels over SWIR of TM and its successors contributed largely to enhancement of inter-class separability and to improvement of classification. Currently, the inclusion of MSS data is confronted with significant challenges regarding the consistency of surface mapping. Considering the inconsistency among the Landsat sensors, it is applicable to generate a consistent time series of spectral indices through proper transformation models. Meanwhile, it suggests the generation of specific class(es) based on interest instead of including all classes simultaneously.

Wetland Hydroperiod Change Along the Upper Columbia River Floodplain, Canada, 1984 to 2019

Increasing air temperatures and changing hydrological conditions in the mountainous Kootenay Region of British Columbia, Canada are expected to affect floodplain wetland extent and function along the Columbia River. The objective of this study was to determine the seasonally inundated hydroperiod for a floodplain section (28.66 km2) of the Upper Columbia River wetlands complex using time series satellite image observations and binary open water mask extraction. A mid pixel resolution (30 m) optical satellite image time series of 61 clear sky scenes from the Landsat Thematic Mapper (TM) and Operational Land Imager (OLI) sensors were used to map temporal variations in floodplain open water wetland extent during the April to October hydrologically active season from 1984 to 2019 (35 years). The hydroperiod from the first 31 scenes (T1: 18 years) was compared to the second 30 (T2: 16 years) to identify changes in the permanent and seasonal open water bodies. The seasonal variation in open water extent and duration was similar across the two time periods but the permanent water body extent diminished by ~16% (or ~3.5% of the floodplain). A simple linear model (r2 = 0.87) was established to predict floodplain open water extent as a function of river discharge downstream of the case study area. Four years of Landsat Multi-Spectral Scanner (MSS) data from 1992 to 1995 (12 scenes) were examined to evaluate the feasibility of extending the hydroperiod record back to 1972 using lower resolution (60 m) archive data. While the MSS hydroperiod produced a similar pattern of open water area to duration to the TM/OLI hydroperiod, small open water features were omitted or expanded due to the lower resolution. While MSS could potentially extend the TM/OLI hydroperiod record, this was not performed as the loss of features like the river channel diminished its value for change detection purposes. Radarsat 2 scenes from 2015 to 2019 were examined to evaluate the feasibility of continued mountain valley hydroperiod monitoring using higher spatial and temporal resolution sensors like the Radarsat Constellation Mission (RCM). From the available horizontal transmit/receive (HH) single polarization sample set (8 scenes), the hydroperiod pattern of open water extent to duration was similar to the longer Landsat time series and possessed greater feature detail, but it was significantly reduced in seasonal inundation area due to the systematic omission of open water areas containing emergent vegetation. However, accepting that differences exist in sensor-based hydroperiod attributes, the higher temporal resolution of RCM will be suited to mountain floodplain inundation monitoring and open water hydroperiod analysis.

Improving Landsat Multispectral Scanner (MSS) geolocation by least-squares-adjustment based time-series co-registration

The Landsat Multispectral Scanner (MSS) data sensed by the Landsat 1–5 satellites make up a significant portion of the early Landsat data record. However, accurate MSS image geolocation has been difficult to achieve systematically due to a number of factors associated primarily with the older sensor and satellite technology. As of August 2019, only 49% of the Landsat MSS archive could be processed at the highest-level L1TP (precision and terrain corrected) level, and the remainder were processed as L1GS (systematically corrected) with inaccurate geolocation and no terrain correction. This paper presents a methodology to improve the geolocation of MSS time series. The methodology uses an area- and feature-based least-squares matching scale-space algorithm, with a time series registration implementation, that we developed previously using Landsat-8 and Sentinel-2 imagery. The methodology requires that at least three L1TP images in the time series acquired over a given path/row are available. A linear combination of a polynomial transformation and multiple radially symmetric radial-basis-functions (RBFs) to model local uncorrected terrain relief effects present in the L1GS images are used. The processing is automated and applied in two passes. The first pass screens L1TP images to select the well-aligned ones that are used as references. The second pass registers the target images, including the L1GS images and any misaligned L1TP images, to all the reference L1TP images. The transformation coefficients for each registered target image are derived by least-squares adjustment using densely-matched tie-points between the target and the reference images. The methodology is demonstrated using 12 months of Landsat-4 MSS images at four Landsat path/row locations that contain agricultural, mountainous, and coastal regions, including a total of 43 L1TP and 31 L1GS images. There were sufficient tie-points to characterize the degree of misregistration of 14 L1GS images that had significant mean misregistration shifts ranging from 7.33 to 17.42 60 m pixels. In addition, at one site, two L1TP images were found to be misaligned and have mean misregistration shifts of 1.27 and 2.20 60 m pixels. The methodology provides sub-pixel registration accuracy - after registration, the mean misregistration shifts for the 14 L1GS and two misaligned L1TP images varied from only 0.10 to 0.41 60 m pixels. The methodology does not use a digital elevation model, and examples illustrate that although the RBF transformations can compensate terrain relief distortion effects, larger (~0.5 to 1.0 pixel) misregistration errors can remain in areas with highly variable terrain relief. Results are also provided for Landsat-1 MSS imagery to demonstrate the applicability of the methodology to even the earliest part of the Landsat record. Detailed qualitative and quantitative results are presented and indicate the potential of the methodology to improve the geolocation of the Landsat MSS data record that is discussed with recommendations for future research.

Forest Cover Change Analysis Using Remote Sensing Techniques in Madhupur Sal Forest of Bangladesh

Deforestation, degradation, damages, transformation and over exploitation of forests are the common problem in different parts of the world. Timely monitoring and assessment of forest resources may help to address and identify the above mentioned problems and thus proper guidance may be given the forest resources manager for rational planning and management of forests. Apart from the conventional methods of forest monitoring, remote sensing with its unique capability of synoptic viewing, real time and repetitive nature offers a potential tool for monitoring and evaluation of forest resources and hence remote sensing technology has been successfully used in various studies like forest inventory, monitoring of forest cover changes and forest damage assessment. In the present research forest cover change analysis in ‘Madhupur Sal Forest’ located in central part of Bangladesh has been investigated using satellite remote sensing data and spatial analysis. Transformation of ‘Sal forest’ to other landuse has been studied using the Landsat MSS (Multi Spectral Scanner) data of 1973 and Landsat 8 OLI (Operational Land Imager) data of 2015. Driving forces behind the transformation of ‘Sal forest’ has also been investigated through GPS (Global Positioning System) based ground verification and interview with the people living in the locality.J. Environ. Sci. & Natural Resources, 10(2): 73-78 2017

Predicting Selected Forest Stand Characteristics with Multispectral ALS Data

In this study, the potential of multispectral airborne laser scanner (ALS) data to model and predict some forest characteristics was explored. Four complementary characteristics were considered, namely, aboveground biomass per hectare, Gini coefficient of the diameters at breast height, Shannon diversity index of the tree species, and the number of trees per hectare. Multispectral ALS data were acquired with an Optech Titan sensor, which consists of three scanners, called channels, working in three wavelengths (532 nm, 1064 nm, and 1550 nm). Standard ALS data acquired with a Leica ALS70 system were used as a reference. The study area is located in Southern Norway, in a forest composed of Scots pine, Norway spruce, and broadleaf species. ALS metrics were extracted for each plot from both elevation and intensity values of the ALS points acquired with both sensors, and for all three channels of the ALS multispectral sensor. Regression models were constructed using different combinations of metrics. The results showed that all four characteristics can be accurately predicted with both sensors (the best R2 being greater than 0.8), but the models based on the multispectral ALS data provide more accurate results. There were differences regarding the contribution of the three channels of the multispectral ALS. The models based on the data of the 532 nm channel seemed to be the least accurate.

Changing Landscape of Marine National Park and Sanctuary, Gulf of Kachchh: Ecological Assessment of Mangroves and Coral Reefs

This paper assesses the ecological changes in mangroves and coral reefs of Marine National Park and Sanctuary (MNP&S), Gulf of Kachchh, Gujarat, India during 1972–2014. Landsat 1 Multi Spectral Scanner data were used for 1972 to map the mangroves and coral reefs whereas Landsat 8 Optical Land Imager data were used to map the coral reef extent only, in MNP&S in 2014. Published literature sources were used to record the area of mangroves and coral reefs of MNP&S for various years between 1972 and 2014, and the changes were analyzed. For the year 1972, total mangrove area mapped is 175.36 sq. km and the total reef area mapped comes out to be 402.14 sq. km. The total area of reef in MNP&S computed for 2014 is 443.49 sq. km. Our analysis shows that MNP&S witnessed severe loss of mangroves till 1992, with annual rate of mangrove degradation being 2.89%. Exploitation by local communities and careless release/spillage of oil and brine by nearby industries were found to be two major anthropogenic factors responsible for degradation of mangroves over a period of four decades. Major reasons found for degradation of reefs in MNP&S were mining and deposition of sediments. The area estimates for coral reefs reported in this paper for 2014 are the latest figures available for coral reefs in this region. It is recommended that monitoring of coastal habitats in MNP&S should be done regularly to understand the changes in the ecology of the area.

Evaluating land surface albedo estimation from Landsat MSS, TM, ETM +, and OLI data based on the unified direct estimation approach

Surface albedo is widely used in climate and environment applications as an important parameter for controlling the surface energy budget. There is an increasing need for albedo data to be available for use in applications that require a fine spatial resolution and for validating coarse-resolution datasets; however, such products with long-term global coverage are not available thus far. Existing algorithms for Landsat albedo estimation all require surface reflectance from explicit and reliable atmospheric correction, which may sometimes be unavailable or carry uncertainties due to saturated visible bands or a lack of dense vegetation. In addition, most of the existing algorithms require concurrent clear-sky observations from the Moderate Resolution Imaging Spectroradiometer (MODIS) for bidirectional reflectance distribution function (BRDF) correction, which limited the data availability for Landsat albedo estimation. To overcome these problems, in this study, we adopt the direct estimation approach previously used with coarser resolution data, such as MODIS and Visible Infrared Imaging Radiometer Suite (VIIRS), and apply it to multiple Landsat data obtained by Multispectral Scanner (MSS), Thematic Mapper (TM), Enhanced Thematic Mapper Plus (ETM+), and Operational Land Imager (OLI). By incorporating Landsat spectral response functions and a database of bidirectional reflectance distribution function (BRDF) into radiative transfer simulations, a unified algorithm is developed to estimate surface albedo directly from the Landsat top-of-atmospheric reflectance data obtained by MSS, TM, ETM+, and OLI with few ancillary inputs. To overcome the saturation problems in the visible bands of TM and ETM+ over very bright surfaces, a refined approach is employed by using only non-saturated bands. The validation results against ground measurements over various land cover types and climate regions show that our algorithm is effective for both snow-free and snow-covered surfaces and can achieve root-mean-square errors (RMSEs) of not more than 0.034. In addition, we show the high potential of the earlier MSS data for producing consistent surface albedo estimations based on inter-comparison with TM-based results with RMSEs of 0.011–0.017 and R2 of 0.858–0.963. This long-term, 30-m resolution surface albedo estimation can date back to the early 1980s, which allows for improved understanding of long-term climate change and land cover change effects.

FEASIBILITY OF MULTISPECTRAL AIRBORNE LASER SCANNING FOR LAND COVER CLASSIFICATION, ROAD MAPPING AND MAP UPDATING

Abstract. This article summarises our first results and experiences on the use of multispectral airborne laser scanner (ALS) data. Optech Titan multispectral ALS data over a large suburban area in Finland were acquired on three different dates in 2015–2016. We investigated the feasibility of the data from the first date for land cover classification and road mapping. Object-based analyses with segmentation and random forests classification were used. The potential of the data for change detection of buildings and roads was also demonstrated. The overall accuracy of land cover classification results with six classes was 96 % compared with validation points. The data also showed high potential for road detection, road surface classification and change detection. The multispectral intensity information appeared to be very important for automated classifications. Compared to passive aerial images, the intensity images have interesting advantages, such as the lack of shadows. Currently, we focus on analyses and applications with the multitemporal multispectral data. Important questions include, for example, the potential and challenges of the multitemporal data for change detection.

Object-based analysis of multispectral airborne laser scanner data for land cover classification and map updating

During the last 20years, airborne laser scanning (ALS), often combined with passive multispectral information from aerial images, has shown its high feasibility for automated mapping processes. The main benefits have been achieved in the mapping of elevated objects such as buildings and trees. Recently, the first multispectral airborne laser scanners have been launched, and active multispectral information is for the first time available for 3D ALS point clouds from a single sensor. This article discusses the potential of this new technology in map updating, especially in automated object-based land cover classification and change detection in a suburban area. For our study, Optech Titan multispectral ALS data over a suburban area in Finland were acquired. Results from an object-based random forests analysis suggest that the multispectral ALS data are very useful for land cover classification, considering both elevated classes and ground-level classes. The overall accuracy of the land cover classification results with six classes was 96% compared with validation points. The classes under study included building, tree, asphalt, gravel, rocky area and low vegetation. Compared to classification of single-channel data, the main improvements were achieved for ground-level classes. According to feature importance analyses, multispectral intensity features based on several channels were more useful than those based on one channel. Automatic change detection for buildings and roads was also demonstrated by utilising the new multispectral ALS data in combination with old map vectors. In change detection of buildings, an old digital surface model (DSM) based on single-channel ALS data was also used. Overall, our analyses suggest that the new data have high potential for further increasing the automation level in mapping. Unlike passive aerial imaging commonly used in mapping, the multispectral ALS technology is independent of external illumination conditions, and there are no shadows on intensity images produced from the data. These are significant advantages in developing automated classification and change detection procedures.

TOWARDS AUTOMATIC SINGLE-SENSOR MAPPING BY MULTISPECTRAL AIRBORNE LASER SCANNING

Abstract. This paper describes the possibilities of the Optech Titan multispectral airborne laser scanner in the fields of mapping and forestry. Investigation was targeted to six land cover classes. Multispectral laser scanner data can be used to distinguish land cover classes of the ground surface, including the roads and separate road surface classes. For forest inventory using point cloud metrics and intensity features combined, total accuracy of 93.5% was achieved for classification of three main boreal tree species (pine, spruce and birch).When using intensity features – without point height metrics - a classification accuracy of 91% was achieved for these three tree species. It was also shown that deciduous trees can be further classified into more species. We propose that intensity-related features and waveform-type features are combined with point height metrics for forest attribute derivation in area-based prediction, which is an operatively applied forest inventory process in Scandinavia. It is expected that multispectral airborne laser scanning can provide highly valuable data for city and forest mapping and is a highly relevant data asset for national and local mapping agencies in the near future.

TOWARDS AUTOMATIC SINGLE-SENSOR MAPPING BY MULTISPECTRAL AIRBORNE LASER SCANNING

This paper describes the possibilities of the Optech Titan multispectral airborne laser scanner in the fields of mapping and forestry. Investigation was targeted to six land cover classes. Multispectral laser scanner data can be used to distinguish land cover classes of the ground surface, including the roads and separate road surface classes. For forest inventory using point cloud metrics and intensity features combined, total accuracy of 93.5% was achieved for classification of three main boreal tree species (pine, spruce and birch).When using intensity features – without point height metrics - a classification accuracy of 91% was achieved for these three tree species. It was also shown that deciduous trees can be further classified into more species. We propose that intensity-related features and waveform-type features are combined with point height metrics for forest attribute derivation in area-based prediction, which is an operatively applied forest inventory process in Scandinavia. It is expected that multispectral airborne laser scanning can provide highly valuable data for city and forest mapping and is a highly relevant data asset for national and local mapping agencies in the near future.

Land surface temperature retrieved from airborne multispectral scanner mid-infrared and thermal-infrared data.

Land surface temperature (LST) is one of the key parameters in the physics of land surface processes at local/global scales. In this paper, a LST retrieval method was proposed from airborne multispectral scanner data comparing one mid-infrared (MIR) channel and one thermal infrared (TIR) channel with the land surface emissivity given as a priori knowledge. To remove the influence of the direct solar radiance efficiently, a relationship between the direct solar radiance and water vapor content and the view zenith angle and solar zenith angle was established. Then, LST could be retrieved with a split-window algorithm from MIR/TIR data. Finally, the proposed algorithm was applied to the actual airborne flight data and validated with in situ measurements of land surface types in the Baotou site in China on 17 October 2014. The results demonstrate that the difference between the retrieved and in situ LST was less than 1.5 K. The bais, RMSE, and standard deviation of the retrieved LST were 0.156 K, 0.883 K, and 0.869 K, respectively, for samples.

Land Cover Change Monitoring Using Landsat MSS/TM Satellite Image Data over West Africa between 1975 and 1990

Monitoring land cover changes from the 1970s in West Africa is important for assessing the dynamics between land cover types and understanding the anthropogenic impact during this period. Given the lack of historical land cover maps over such a large area, Landsat data is a reliable and consistent source of information on land cover dynamics from the 1970s. This study examines land cover changes occurring between 1975 and 1990 in West Africa using a systematic sample of satellite imagery. The primary data sources for the land cover classification were Landsat Multispectral Scanner (MSS) for 1975 and Landsat Thematic Mapper (TM) for the 1990 period. Dedicated selection of the appropriate image data for land cover change monitoring was performed for the year 1975. Based on this selected dataset, the land cover analysis is based on a systematic sample of 220 suitable Landsat image extracts (out of 246) of 20 km × 20 km at each one degree latitude/longitude intersection. Object-based classification, originally dedicated for Landsat TM land cover change monitoring and adapted for MSS, was used to produce land cover change information for four different land cover classes: dense tree cover, tree cover mosaic, other wooded land and other vegetation cover. Our results reveal that in 1975 about 6% of West Africa was covered by dense tree cover complemented with 12% of tree cover mosaic. Almost half of the area was covered by other wooded land and the remaining 32% was represented by other vegetation cover. Over the 1975–1990 period, the net annual change rate of dense tree cover was estimated at −0.95%, at −0.37% for the other wooded land and very low for tree cover mosaic (−0.05%). On the other side, other vegetation cover increased annually by 0.70%, most probably due to the expansion of agricultural areas. This study demonstrates the potential of Landsat MSS and TM data for large scale land cover change assessment in West Africa and highlights the importance of consistent and systematic data processing methods with targeted image acquisition procedures for long-term monitoring.

CBERS-02 IRMSS 热红外数据及UTAE 算法在城市热岛研究中的应用

This paper discusses the use of the Algorithm of Urban Thermal Anomaly Extraction (UTAE) in extracting information on urban heat islands (UHI) from CBERS-02 Infrared Multispectral Scanner (IRMSS) data. The algorithm uses a robust threshold estimation method that scans the entire image through a moving window (3×3 to 9×9 pixels) and calculates a threshold of mean thermal value +1×standard deviation. It distinguishes between UHI and non-UHI areas and assesses UHI intensity according to the cumulative number of pixels identified as thermal anomalies. Threshold estimation is dynamic and the algorithm can be considered unbiased. This method is used to estimate the area of UHI in Changsha which varies from 27.21 km² to 33.98 km² on 13 February 2004. As to UHI intensity analyses at macro-scale, larger windows should be used to reflect the relationship between urban and rural areas embodied in general development trends, while studies at micro-scale smaller windows should be used to analyze the specific distribution of UHIs and identify relationships among different types of underlying surface, and their driving factors. Finally, we discuss the applicability of the method to data generated by CBERS and its successors.

Enhancement of bioenergy estimations within forests using airborne laser scanning and multispectral line scanner data

Abstract Forest biomass is a substantial source of renewable energy and is becoming increasingly important due to environmental and economic reasons. In Germany, several studies have assessed the bioenergy potential for large areas, e.g. for an entire Federal state. However, in most cases it was not possible to provide detailed maps showing the biomass and the sustainable energy potential for individual forest stands. Thus, the aim of this study was to develop a new and robust method that provides detailed information regarding the spatial distribution of biomass and forest residues as a potential energy resource using a combination of remotely sensed and in situ data. A case study was carried out in a mixed forest in Southern Germany. First, regression analyses were applied to identify relationships between field measurements with several remote sensing metrics to estimate timber volume, mean stem diameter and age. Cross-validation yielded relative root mean square errors (RMSEs) of 30.20% for volume, 27.92% for diameter and 28.81% for the estimation of the age. The absolute RMSEs were smaller than the standard deviation of the observed variables. Next, the regression equations were used to compute attributes for individual forest stands. Stand attributes were then used to model forest residues. To estimate the sustainable annual potential, the actual harvest volume, as defined by forest management planning, was included in the model. Different model parameters were analyzed and an average potential from 0.993 to 1.181 t ha −1 a −1 was computed. The results were compared to previous studies in Germany.

Estimating Single Tree Stem Volume of Pinus sylvestris Using Airborne Laser Scanner and Multispectral Line Scanner Data

So far, only a few studies have been carried out in central European forests to estimate individual tree stem volume of pine trees from high resolution remote sensing data. In this article information derived from airborne laser scanner and multispectral line scanner data were tested to predict the stem volume of 178 pines (Pinus sylvestris) in a study site in the south-west of Germany. First, tree crowns were automatically delineated using both multispectral and laser scanner data. Next, tree height, crown diameter and crown volume were derived for each crown segment. All combinations of the derived tree features were used as explanatory variables in allometric models to predict the stem volume. A model with tree height and crown diameter had the best performance with respect to the prediction accuracy determined by a leave-one-out cross-validation: Root Mean Square Error (RMSE) = 24.02% and Bias = 1.36%.

Using knowledge discovery with data mining from the Australian Soil Resource Information System database to inform soil carbon mapping in Australia

We present a piecewise linear decision tree model for predicting percent of soil organic C (SOC) in the agricultural zones of Australia generated using a machine learning approach. The inputs for the model are a national database of soil data, national digital surfaces of climate, elevation, and terrain variables, Landsat multispectral scanner data, lithology, land use, and soil maps. The model and resulting map are evaluated, and insights into biogeological surficial processes are discussed. The decision tree splits the overall data set into more homogenous subsets, thus in this case, it identifies areas where SOC responds closely to climatic and other environmental variables. The spatial pattern of SOC corresponds well to maps of estimated primary productivity and bioclimatic zones. Topsoil organic C levels are highest in the high rainfall, temperate regions of Tasmania, Victoria, and Western Australia, along the coast of New South Wales and in the wet tropics of Queensland; and lowest in arid and semiarid inland regions. While this pattern broadly follows continental vegetation, soil moisture, and temperature patterns, it is governed by a spatially variable hierarchy of different climatic and other variables across bioregions of Australia. At the continental scale, soil moisture level, rather than temperature, seems most important in controlling SOC.

Change detection of land cover and land use using remote sensing and GIS: a case study in Kemer, Turkey

Suitable climate conditions as well as rare natural and cultural resources in the Mediterranean region of Turkey have made it a centre of attraction for two conflicting interests: agricultural production and tourism activity. In recent years, the natural appeal of the area and economic interests have dominated tourism over agriculture, forestry and wildlife and led to significant urban sprawl. The objective of this study was to investigate the dimensions of the land cover/use conversion of a quiet, small village (Kemer) into an internationally popular touristic destination. In the scope of this study, land cover and land use changes were analysed over approximately 30 years using Landsat Multispectral Scanner (MSS) data (1975), and Landsat Thematic Mapper (TM) data (1987, 1995 and 2003) by image classification techniques. In the land use hierarchy, the Coordination of Information on the Environment (CORINE) methodology was used as a base. Data organization and collection stages were achieved in a geographical information system (GIS) environment. Finally, the results indicate that, from 1975 to 2003, permanent crops decreased by 75% and most of these areas were structured. Throughout the same years a 55% decrease was determined to arise in heterogeneous agricultural areas. From 1975 to 2003, there had been no serious change in forests. The main reason for this is the accommodation of the Olympos‐Bey Mountains national park in the region.

Thermal infrared data analyses of Meteor Crater, Arizona: Implications for Mars spaceborne data from the Thermal Emission Imaging System

Thermal infrared (TIR) data from the Earth‐orbiting Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) instrument are used to identify the lithologic distribution of the Meteor Crater ejecta blanket. Thermal emission laboratory spectra were obtained for collected samples, and spectral deconvolution was performed on ASTER emissivity data using both image and sample end‐members. Comparison of the spaceborne ASTER data to the airborne Thermal Infrared Multispectral Scanner (TIMS) data was used to validate the ASTER end‐member analyses. The ASTER image end‐member analysis agrees well with past studies considering the effects of resolution degradation. The work at Meteor Crater has direct bearing on the interpretation of Thermal Emission Imaging System (THEMIS) data currently being returned from Mars. ASTER and THEMIS have similar spatial and spectral resolutions, and Meteor Crater serves as an analog for similar‐sized impact sites on Mars. These small impact craters have not been studied in detail owing to the low spatial resolution of past orbiting TIR instruments. Using the same methodology as that applied to Meteor Crater, THEMIS TIR data of a provisionally named Winslow Crater (∼1 km) impact crater in Syrtis Major are analyzed. The crater rim and ejecta blanket were found to contain larger block sizes and a lower albedo than the surrounding ejecta‐free plain, indicating a young impact age. The composition of the rim, ejecta, and surrounding plain is determined to be dominated by basalt; however, potential stratigraphy has also been identified. Results of this work could be extended to future investigations using THEMIS data.