Multispectral Imaging Instrument Research Articles

Monitoring Salinity in Inner Mongolian Lakes Based on Sentinel-2 Images and Machine Learning

Salinity is an essential parameter for evaluating water quality and plays a crucial role in maintaining the stability of lake ecosystems, particularly in arid and semi-arid climates. Salinity responds to changes in climate and human activity, with significant impacts on water quality and ecosystem services. In this study, Sentinel-2A/B Multi-Spectral Instrument (MSI) images and quasi-synchronous field data were utilized to estimate lake salinity using machine learning approaches (i.e., XGB, CNN, DNN, and RFR). Atmospheric correction for MSI images was tested using six processors (ACOLITE, C2RCC, POLYMER, MUMM, iCOR, and Sen2Cor). The most accurate model and atmospheric correction method were found to be the extreme gradient boosting tree combined with the ACOLITE correction algorithm. These were used to develop a salinity model (N = 70, mean absolute percentage error = 9.95%) and applied to eight lakes in Inner Mongolia from 2016 to 2024. Seasonal and interannual variations were explored, along with an examination of potential drivers of salinity changes over time. Average salinities in the autumn and spring were higher than in the summer. The highest salinities were observed in the lake centers and tended to be consistent and homogeneous. Interannual trends in salinity were evident in several lakes, influenced by evaporation and precipitation. Climate factors were the primary drivers of interannual salinity trends in most lakes.

Rapid determination of fat content: Advanced spectroscopic methods across diverse fish species

The rapid estimation of fat content using spectroscopic-based sensors, irrespective of fish species (salmon, trout, sea bass, sea bream, tuna, cod, and mackerel), was primarily investigated in the present study. The fat content and fatty acid (FA) composition was quantified with reference methods. Fourier-Transform Infrared (FTIR) and Fourier-Transform Near-Infrared (FT-NIR) spectroscopy, along with multispectral imaging (MSI) instruments (both benchtop and portable), were evaluated for their ability to rapidly predict fat content in ground samples using data analysis. The performance of the PLS-R models was evaluated according to root mean square error (RMSE), coefficient of determination (R2) and residual prediction deviation (RPD). Also fish were classified as fat/low-fat and low/medium/high-fat using partial least squares discriminant analysis (PLS-DA). All fish species exhibited a consistent pattern of unsaturated fatty acids (UNFA) > monounsaturated fatty acids (MUFA) > polyunsaturated fatty acids (PUFA) > saturated fatty acids (SFA) and the range of fat content was from 22.8 (salmon) to 0.02 (cod), expressed in g/100 g of sample based on the reference methods. In terms of fat content prediction using rapid sensors the best performance indices of the test set were obtained from the benchtop-MSI (RMSE = 1.475, R2 = 0.847, RPD = 2.581) and FT-NIR (RMSE = 1.638, R2 = 0.855, RPD = 2.651) instruments, while FTIR and portable-MSI had scores of RMSE = 1.874, R2 = 0.815, RPD = 2.309 and RMSE = 1.737, R2 = 0.786, RPD = 2.191, respectively. All sensors discriminated fat from low-fat samples (accuracy = 100%). For low/medium/high fat the best results were achieved by benchtop-MSI (accuracy = 94.12%), followed by portable-MSI (accuracy = 88.24%) and FTIR (accuracy = 84.21%). Results were less satisfactory for the FT-NIR method (accuracy = 68.75%). This study demonstrates that vibrational and multispectral imaging spectroscopies, when coupled with data analysis, have potential to provide information about the nutritional quality (e.g., fat content) independent of the fish species. Such insights could contribute to the automation and potential digitalization of processes within the fields of food nutrition and the seafood industry.

Methods for detecting green tide in the Yellow Sea using Google Earth Engine platform

The green tide was a blooming phenomenon consisting of outbreaks and aggregations of marine macroalgae, causing severe damage to the ecosystem of the Yellow Sea in China. Remote sensing technology was considered an effective means of green tide detection. Currently, commonly used low spatial resolution satellites cannot satisfy the green tide detection in the fine-scale range. To better improve the accuracy of green tide identification, based on the Commission Internationale del'éclairage (CIE) system, two new green tide detection algorithms (CIE xy, hue angle α) were established using Sentinel-2 MultiSpectral Instrument (MSI) and Landsat-8 Operational Land Imager (OLI) data on the Google Earth Engine (GEE) platform. These algorithms were validated by introducing the quantitative index Dgw from "Interclass Distance". The CIE xy algorithm and the hue angle α algorithm based on Sentinel-2 MSI exhibited higher Dgw values of 10.29 and 5.87, respectively, surpassing the performance of the two algorithms based on the Landsat-8 OLI in green tide identification (Dgw values of 3.36 and 5.17, respectively). Meanwhile, the proposed algorithms were compared with normalized difference vegetation index (NDVI), difference vegetation index (DVI), ratio vegetation index (RVI), floating algae index (FAI), enhanced vegetation index (EVI), and algal bloom detection index (ABDI) algorithms using Sentinel-2 MSI images. The results showed that the CIE xy algorithm and the NDVI algorithm outperformed the other algorithms. Especially in turbid water, the CIE xy algorithm exhibited significant advantages. However, the hue angle α algorithm still showed some potential in identifying green tide, particularly in the presence of thin cloud interference. These findings can provide effective information support for the monitoring of green tide in the Yellow Sea.

Vision Transformer for Flood Detection Using Satellite Images from Sentinel-1 and Sentinel-2

Floods are devastating phenomena that occur almost all around the world and are responsible for significant losses, in terms of both human lives and economic damages. When floods occur, one of the challenges that emergency response agencies face is the identification of the flooded area so that access points and safe routes can be determined quickly. This study presents a flood detection methodology that combines transfer learning with vision transformers and satellite images from open datasets. Transformers are powerful models that have been successfully applied in Natural Language Processing (NLP). A variation of this model is the vision transformer (ViT), which can be applied to image classification tasks. The methodology is applied and evaluated for two types of satellite images: Synthetic Aperture Radar (SAR) images from Sentinel-1 and Multispectral Instrument (MSI) images from Sentinel-2. By using a pre-trained vision transformer and transfer learning, the model is fine-tuned on these two datasets to train the models to determine whether the images contain floods. It is found that the proposed methodology achieves an accuracy of 84.84% on the Sentinel-1 dataset and 83.14% on the Sentinel-2 dataset, revealing its insensitivity to the image type and applicability to a wide range of available visual data for flood detection. Moreover, this study shows that the proposed approach outperforms state-of-the-art CNN models by up to 15% on the SAR images and 9% on the MSI images. Overall, it is shown that the combination of transfer learning, vision transformers, and satellite images is a promising tool for flood risk management experts and emergency response agencies.

Combining multisensor images and social network data to assess the area flooded by a hurricane event.

In this study, multisensor remote sensing datasets were used to characterize the land use and land covers (LULC) flooded by Hurricane Willa which made landfall on October 24, 2018. The landscape characterization was done using an unsupervised K-means algorithm of a cloud-free Sentinel-2 MultiSpectral Instrument (MSI) image, acquired during the dry season before Hurricane Willa. A flood map was derived using the histogram thresholding technique over a Synthetic Aperture Radar (SAR) Sentinel-1 C-band and combined with a flood map derived from a Sentinel-2 MSI image. Both, the Sentinel-1 and Sentinel-2 images were obtained after Willa landfall. While the LULC map reached an accuracy of 92%, validated using data collected during field surveys, the flood map achieved 90% overall accuracy, validated using locations extracted from social network data, that were manually georeferenced. The agriculture class was the dominant land use (about 2,624 km2), followed by deciduous forest (1,591 km2) and sub-perennial forest (1,317 km2). About 1,608 km2 represents the permanent wetlands (mangrove, salt marsh, lagoon and estuaries, and littoral classes), but only 489 km2 of this area belongs to aquatic surfaces (lagoons and estuaries). The flooded area was 1,225 km2, with the agricultural class as the most impacted (735 km2). Our analysis detected the saltmarsh class occupied 541 km2in the LULC map, and around 328 km2 were flooded during Hurricane Willa. Since the water flow receded relatively quickly, obtaining representative imagery to assess the flood event was a challenge. Still, the high overall accuracies obtained in this study allow us to assume that the outputs are reliable and can be used in the implementation of effective strategies for the protection, restoration, and management of wetlands. In addition, they will improve the capacity of local governments and residents of Marismas Nacionales to make informed decisions for the protection of vulnerable areas to the different threats derived from climate change.

Mapping burned areas in Thailand using Sentinel-2 imagery and OBIA techniques

Monitoring burned areas in Thailand and other tropical countries during the post-harvest season is becoming increasingly important. High-resolution remote sensing data from Sentinel-2 satellites, which have a short revisit time, is ideal for accurately and efficiently mapping burned regions. However, automating the mapping of agriculture residual on a national scale is challenging due to the volume of information and level of detail involved. In this study, a Sentinel-2A Level-1C Multispectral Instrument image (MSI) from February 27, 2018 was combined with object-based image analysis (OBIA) algorithms to identify burned areas in Mae Chaem, Chom Thong, Hod, Mae Sariang, and Mae La Noi Districts in Chiang Mai, Thailand. OBIA techniques were used to classify forest, agricultural, water bodies, newly burned, and old burned regions. The segmentation scale parameter value of 50 was obtained using only the original Sentinel-2A band in red, green, blue, near infrared (NIR), and Normalized Difference Vegetation Index (NDVI). The accuracy of the produced maps was assessed using an existing burned area dataset, and the burned area identified through OBIA was found to be 85.2% accurate compared to 500 random burned points from the dataset. These results suggest that the combination of OBIA and Sentinel-2A with a 10 m spatial resolution is very effective and promising for the process of burned area mapping.

Estimating the concentration of total suspended solids in inland and coastal waters from Sentinel-2 MSI: A semi-analytical approach

Inland and coastal waters provide key ecosystem services and are closely linked to human well-being. In this study, we propose a semi-analytical method, which can be applied to Sentinel-2 MultiSpectral Instrument (MSI) images to retrieve high spatial-resolution total suspended solids (TSS) concentration in a broad spectrum of aquatic ecosystems ranging from clear to extremely turbid waters. The presented approach has four main steps. First, the remote sensing reflectance (Rrs) at a band lacking in MSI (620 nm) is estimated through an empirical relationship from Rrs at 665 nm. Second, waters are classified into four types (clear, moderately turbid, highly turbid, and extremely turbid). Third, semi-analytical algorithms are used to estimate the particulate backscattering coefficient (bbp) at a reference band depending on the water types. Last, TSS is estimated from bbp at the reference band. Validation and comparison of the proposed method with three existing methods are performed using a simulated dataset (N = 1000), an in situ dataset collected from global inland and coastal waters (N = 1265) and satellite matchups (N = 40). Results indicate that the proposed method can improve TSS estimation and provide accurate retrievals of TSS from all three datasets, with a median absolute percentage error (MAPE) of 14.88 %, 31.50 % and 41.69 % respectively. We also present comparisons of TSS mapping between the Sentinel-3 Ocean and Land Colour Instrument (OLCI) and MSI in Lake Kasumigaura, Japan and the Tagus Estuary, Portugal. Results clearly demonstrate the advantages of using MSI for TSS monitoring in small water bodies such as rivers, river mouths and other nearshore waters. MSI can provide more detailed and realistic TSS estimates than OLCI in these water bodies. The proposed TSS estimation method was applied to MSI images to produce TSS time-series in Lake Kasumigaura, which showed good agreements with in situ and OLCI-derived TSS time-series.

Burned area detection and mapping using time series Sentinel-2 multispectral images

Accurate mapping of burned areas (BAs) is essential for post-disaster reconstruction, air quality assessment, and estimation of fire emissions. Remote sensing has become the most practical means to map global/regional BAs. Space-borne coarse-resolution (250–1000 m) BA products play an essential role in fire-related science and applications, but small BAs are typically poorly represented due to resolution limitations. Moderate-resolution (10–30 m) imagery provides a more detailed spatial extent of BAs, but the various disturbances (e.g., plant phenology, cloud shading, flooding, harvesting, grazing, pests, and diseases) make application on a global scale challenging. Here, we propose an automatic BA detection algorithm based on time series images acquired by the Sentinel-2 MultiSpectral Instrument (MSI) and the Google Earth Engine. Specifically: (i) We determined an optimal set of spectral indices for MSI images based on global sampling to mitigate the background heterogeneity and BA spectral diversity. (ii) We jointly used three temporal scales, i.e., the single-temporal, dual-temporal, and short-time series MSI images, to identify potential BA regions (i.e., BA candidates). (iii) We integrated multi-source active fire (AF) products derived from the Moderate-resolution Imaging Spectroradiometer (MODIS), Visible Infrared Imaging Radiometer Suite (VIIRS), Operational Land Imager (OLI), and MSI instead of single-source products to refine BA candidates. (iv) We constructed an interannual time series to improve the BA candidates not confirmed by AF products. The proposed BA detection method was applied to different land cover and regional scales, including forests, grasslands, savannas, shrublands, and croplands at the regional (scene) and national levels (Portugal). Validation and inter-comparison with similar products demonstrated that the proposed method is reliable: the Dice coefficient of our detection results was improved by ∼7% and ∼ 9%, respectively, compared to the moderate-resolution BA products (e.g., LBA_CU for the conterminous United States and FireCCISFD20 for sub-Saharan Africa in 2019). These results suggest that the proposed method can accurately and automatically map BAs, providing a foundation for fire monitoring programs and climate change research.

High Heterogeneity LULC Classification in Ujung Kulon National Park, Indonesia: A Study Testing 11 Indices, Random Forest, Sentinel-2 MSI, and GEE-based Cloud Computing

The Ujung Kulon National Park (UKNT) is one of the national parks on the island of Java and has an essential role in saving endemic species in Indonesia. As a form of national park conservation effort, the completeness of LULC spatial data is a primary database that is indispensable in determining national park management policies. Therefore, this research was conducted to map the LULC (Land Use - Land Cover) in the forest landscape with high heterogeneity in UKNT. Sentinel-2 MSI (Multispectral Instrument) image data were classified using the Random Forest (RF) classification algorithm and tested using 11 index algorithms. The classification process takes place on a cloud computing-based geospatial platform, Google Earth Engine (GEE). This test resulted in 10 LULC classes; water had the broadest percentage of 45.44%. Meanwhile, the primary forest has an area of 21,868.41 or about 19.53% of the total area of the national park. However, there are some discrepancies in the spatial information generated by this classification process, so it is considered necessary to evaluate the combination of indexes, training data, and classification algorithms to limit the classification area. Therefore, this study is expected to be considered for further research related to LULC in high-heterogeneity landscapes.

Detection of Sargassum from Sentinel Satellite Sensors Using Deep Learning Approach

Since 2011, the proliferation of brown macro-algae of the genus Sargassum has considerably increased in the North Tropical Atlantic Sea, all the way from the Gulf of Guinea to the Caribbean Sea and the Gulf of Mexico. The large amount of Sargassum aggregations in that area cause major beaching events, which have a significant impact on the local economy and the environment and are starting to present a real threat to public health. In such a context, it is crucial to collect spatial and temporal data of Sargassum aggregations to understand their dynamics and predict stranding. Lately, indexes based on satellite imagery such as the Maximum Chlorophyll Index (MCI) or the Alternative Floating Algae Index (AFAI), have been developed and used to detect these Sargassum aggregations. However, their accuracy is questionable as they tend to detect various non-Sargassum features. To overcome false positive detection biases encountered by the index-thresholding methods, we developed two new deep learning models specific for Sargassum detection based on an encoder–decoder convolutional neural network (CNN). One was tuned to spectral bands from the multispectral instrument (MSI) onboard Sentinel-2 satellites and the other to the Ocean and Land Colour Instrument (OLCI) onboard Sentinel-3 satellites. This specific new approach outperformed previous generalist deep learning models, such as ErisNet, UNet, and SegNet, in the detection of Sargassum from satellite images with the same training, with an F1-score of 0.88 using MSI images, and 0.76 using OLCI images. Indeed, the proposed CNN considered neighbor pixels, unlike ErisNet, and had fewer reduction levels than UNet and SegNet, allowing filiform objects such as Sargassum aggregations to be detected. Using both spectral and spatial features, it also yielded a better detection performance compared to algal index-based techniques. The CNN method proposed here recognizes new small aggregations that were previously undetected, provides more complete structures, and has a lower false-positive detection rate.

Radiometric cross-calibration of Sentinel-2B MSI with HY-1C SCS based on the near simultaneous imaging of common ground targets.

To simplify the cross-calibration process and improve calibration frequency and accuracy, this paper proposes a cross-calibration method for the multispectral remote sensor Multi-Spectral Instrument (MSI) carried by Sentinel-2B using the hyperspectral remote sensor, that is, the satellite calibration spectrometer (SCS) carried by Hai Yang (HY)-1C, as the reference sensor and establishes the calibration process. Precise spectral response matching between SCS and MSI spectral channels is performed by the interpolation and iteration of hyperspectral data to eliminate the difference in band settings and significantly improve the accuracy of cross-calibration coefficients. The SNO-x inherited from the simultaneous nadir overpass (SNO) method is used as a prediction method to carry out cross-calibration imaging in mid- and low-latitude regions, which improves the cross-calibration frequency and broadens the dynamic range of calibration. The cross-calibration coefficients and offsets of MSI B1∼B7 and B8a were obtained by processing the earth observation images of the MSI and SCS on January 24, 2019. Then, the cross-calibration coefficients and offsets are applied to the ocean, farmland and other ground objects with different reflectance, and the reliability and accuracy of the cross-calibration results are evaluated with the Moderate-resolution Imaging Spectroradiometer (MODIS) carried by Terra as a reference. To improve the accuracy of the evaluation, the spectral band adjustment factor between the corresponding channels of MSI and MODIS is used to correct the measured reflectance of MODIS based on the satellite calibration coefficient. The reflectance directly obtained by processing the MSI image is used as the MSI-measured reflectance, the reflectance obtained based on the cross-calibration coefficient is used as the MSI-calculated reflectance, and the reflectance corrected by the spectral band adjustment factor (SBAF) is used as the MODIS-calculated reflectance. The results show that the mean root-mean-square relative error (RMSRE) between the MODIS-calculated reflectance and the MSI-calculated reflectance is 2.16% and that the mean RMSRE between the MODIS-calculated reflectance and the MSI-measured reflectance is 3.05%, indicating that the reflectance corrected based on calibration coefficients is closer to the MODIS-calculated reflectance. Finally, each uncertainty source in the cross-calibration is analyzed, and the comprehensive uncertainty is found to be 4.03%, indicating that SCS can be used as a reference for MSI cross-calibration.

Discrimination of Oceanic Whitecaps Derived by Sea Surface Wind Using Sentinel‐2 MSI Images

AbstractOceanic whitecaps, as a manifestation of the wind‐wave breaking process and the medium of air‐sea exchange, play an important role in sea surface research. The observational data of oceanic whitecap coverage are generally in situ photographs or videos. The use of spaceborne optical sensors to capture oceanic whitecaps could provide more spatial distribution and dynamic marine environment information. In this study, more than 100 Sentinel‐2 Multi‐Spectral Instrument (MSI) images and corresponding synchronous buoy wind speed data were collected to investigate oceanic whitecaps. A curvature image processing method was employed to successfully identify oceanic whitecaps in MSI images and the whitecap coverage was estimated based on the whitecap recognition results. We established a power‐law model of MSI‐estimated whitecap coverage (W) and whitecap number density with buoy‐measured wind speed at a height of 10 m above the sea surface (U10). In addition, the differences between the MSI‐derived model and in situ measurement‐derived models which are mainly caused by the scale effect of optical remote sensing, are discussed. The whitecap‐wind model demonstrates that MSI images can improve the quantification of sea surface wind speed with high spatial resolution. MSI images were used to estimate regional high‐spatial resolution (4 km) wind speeds, and the merged results (0.25°) were verified with the hourly wind products of the fifth generation European ECMWF (Centre for Medium‐Range Weather Forecasts) atmospheric reanalysis (ERA5). Moreover, the influence of sunglint on whitecap recognition and whitecap coverage was also analyzed. The reflectance of whitecap‐affected pixels in MSI images increased obviously with wind speed compared with background seawater in weak sunglint reflection area. These results indicated that the parameters of oceanic whitecaps derived from high‐spatial resolution optical images can be used to estimate wind speed and provide a new approach for monitoring marine dynamic environments in the future.

Remote sensing of tropical riverine water quality using sentinel-2 MSI and field observations

Monitoring the water quality as well as assessing its ecological status, both in coastal and inland environments, are essential tasks and pose serious environmental challenges. Although both field measurements and observations from permanent measuring stations may be available, the advent of modern remote sensors, such as MSI (MultiSpectral Instrument), on board the Sentinel-2 satellite, has made it possible to obtain inland biogeochemical products at high spatial (10 m) and temporal (5-days) resolutions. However, validating Sentinel-2 derived water quality estimations in tropical riverine and costal water is an ongoing effort.This study presents one of the first attempts to locally adapt and validate the C2RCC atmospheric processor for the inversion of IOPs to water quality parameters of productive tropical riverine waters in South East Asia using a time series of 65 Sentinel-2 MSI images from 2018 to 2021. We developed locally adapted relationships between C2X-Nets-derived inherent optical properties (IOPs) and surface reflectances with field observations of chl-a concentration, colored dissolved organic matter (CDOM), turbidity, transparency, and in situ reflectance spectra. Results have been validated against 3-years long time series of observations collected at six monitoring stations of the Metropolitan Waterworks Authority (MWA) of Thailand covering approximately 130 km-long stretch of the Chao Phraya river.Locally adapted C2X-Net processor showed good performances in predicting the chl-a concentrations, turbidity and Secchi disk depth. However, relatively low performance was noted for C2X-Nets processor in predicting CDOM absorption. During the period 2018–2021, the temporal trends of chl-a concentration and turbidity showed a clear seasonal pattern with peak turbidity values in the wet seasons. Spatial pattern of retrieved water quality products showed a noticeable change in correspondence with the built-up area of Bangkok. Even if elevated chl-a concentrations have been generally observed all year around, highest peaks have been observed in the dry and at beginning of the wet seasons.To the best knowledge of the authors, our findings firstly demonstrated the integration potential of C2RCC and satellite-retrieved water quality estimations into existing national water quality monitoring network in the context of water resources management and decision-making in the tropical Southeast Asian countries.

First Clinical Investigation of Near-Infrared Window IIa/IIb Fluorescence Imaging for Precise Surgical Resection of Gliomas.

The near-infrared window II (NIR-II, 1000-1700 nm) imaging, including NIR-IIa (1300-1400 mm) and NIR-IIb (1500-1700 mm), outperforms the near-infrared window I (NIR-I, 700-900 nm) imaging in biological researches. However, the advantages of NIR-IIa/IIb imaging in human study are ambiguous. This study aims to apply the NIR-IIa/IIb imaging to glioma resection and evaluate their performance by using the developed imaging instrument and intraoperative image fusion method. A multispectral fluorescence imaging instrument that integrated NIR-I/II/IIa/IIb fluorescence imaging and an intraoperative image fusion method have been developed. Seven patients with grade III/IV glioma have been enrolled. NIR-I/II images of the tumor and NIR-I/II/IIa/IIb images of cerebral vessels were acquired with the administration of indocyanine green. Images were fused using the specialized fusion method to synchronously provide the distribution of the vessels and the surgical boundaries. The NIR-IIa/IIb imaging was successfully applied to the clinic. High imaging resolution and contrast have been attained in the NIR-IIa/IIb spectra. Besides, capillaries with an apparent diameter as small as 182 μm were acquired using NIR-IIb imaging. Tumor-feeding arteries were precisely blocked and tumors were excised to the maximum extent for all patients. The blood loss volume during surgery was significantly reduced compared with the control group. The multispectral fluorescence imaging showed high performance, which led to a significant reduction in blood loss volume. The novel multispectral fluorescence imaging technology can assist surgeons in other vascular surgeries in the future.

Intercalibration of the reflective solar bands of MODIS and MISR instruments on the Terra platform

As a part of NASA’s Earth Observing System (EOS), the Terra spacecraft was launched on December 18, 1999, with the goal of understanding the changes of the Earth, by examining the Earth’s hydrological, geophysical, and climatic processes. The Moderate-resolution Imaging Spectroradiometer (MODIS) and Multi-angle Imaging Spectroradiometer (MISR) instruments on the Terra platform, combined with their continuous operation, broad spectral coverage, and different spatial resolutions, have played an important role to achieve the goals of the EOS. Over two decades of successful operations, these multispectral imaging instruments have benefited a variety of scientific applications. Being on the same platform, the two sensors complement each other in terms of spatial coverage (and target viewing geometry) and facilitate synergistic applications using multispectral data. A consistent radiometric calibration between these sensors is a prerequisite for creating high-quality science products from their observations. Both instruments underwent intensive prelaunch characterization and their on-orbit calibrations are monitored using their onboard calibrators. We perform a calibration inter-comparison of the spectrally matching bands of the two instruments using vicarious techniques. These techniques include multiyear simultaneous views of the North African desert, North Atlantic Ocean, and Dome Concordia; therefore, covering different reflectance regimes. Moreover, the near-simultaneous top-of-atmosphere (TOA) reflectance measurements from Railroad Valley (RRV), as provided by the radiometric calibration network (RadCalNet) (converted to TOA), are also included, which is used as a calibration reference to compare the on-orbit observations between MODIS and MISR. Simultaneous overpasses from desert, ocean, Dome C, and RadCalNet over RRV reveal that the agreement between the four spectrally matching bands is within 3% for the time-period between 2014 and 2020. Furthermore, some long-term drifts are observed in the TOA reflectance time-series from MISR for the red and NIR bands that are expected to be corrected in a future calibration reprocess.

Spatiotemporal characterization of land cover and degradation in the agreste region of Pernambuco, Brazil, using cloud geoprocessing on Google Earth Engine

The characterization of land use and land cover (LULC), as well as the identification of its degradation factors, are necessary for the preservation of the agroecosystem and help in decision making. Therefore, the objective of this research was to evaluate the spatial-temporal dynamics of vegetation cover and soil degradation in the Agreste mesoregion of the state of Pernambuco, through the leaf area index (LAI), soil-adjusted vegetation index (SAVI), and pasture vegetation cover index (PVC) from Sentinel-2/MSI images from the Multispectral Instrument (MSI) sensor and, develop software for automatic cloud processing on the Google Earth Engine (GEE) platform. Were used 8 Sentinel-2/MSI satellite images (2017–2020), processed in GEE, to obtain the SAVI, LAI, and PVC. A pluviometric survey was carried out for the month before the registration of each image, from the Climate Hazards Group InfraRed Precipitation with Station data (CHIRPS). The images were subjected to descriptive statistics and principal component analysis (PCA). The months that comprise the highest rainfall exceeded the accumulated 100 mm. The SAVI values ranged from −0.2 to 0.80, of the LAI between 0 and 3 m2 m−2 (with small regions greater than 3). Regions of the low spectral response of LAI and SAVI, correlated with areas of low rainfall in the study region. The total variance showed 100% representativeness and significance of the data for the accumulated in PC2, this denotes how significant the correlations between SAVI, LAI, and PVC are. Because of the new climatic and environmental scenarios, this study presented a relevant contribution to characterizing the potential areas in soil degradation processes, mainly in the Caatinga biome. Between the years 2017–2020, there was the occurrence of soil degradation processes in the Agreste region of Pernambuco, where the state's dairy basin is located, caused by poor management, use of arable land, and long periods of drought.

Monitoring and analysis of crop irrigation dynamics in Central Italy through the use of MODIS NDVI data

ABSTRACT A recent study has proposed and tested a semi-empirical method to estimate crop irrigation based on a water balance logic and Sentinel-2 Multi Spectral Instrument (MSI) NDVI imagery. The current paper aims at extending the same approach to the analysis of the main irrigation patterns occurred in Tuscany (Central Italy) during the 2000–2019 period. This operation was made possible by feeding the irrigation water (IW) estimation method with 250-m spatial resolution Terra/Aqua Moderate Resolution Imaging Spectroradiometer (MODIS) NDVI images. The results of this operation were first assessed versus various reference datasets available for the region; next, the annual maps of IW estimated for the 20 study years were analyzed at province scale in conjunction with relevant agricultural statistics. The use of MODIS in place of MSI images reduces the IW estimation accuracy irregularly at local scale, depending on the size and spatial arrangement of irrigated and non-irrigated fields; the reduction in accuracy is, however, marginal over relatively large areas. Irrigated crops are decreasing throughout most Tuscany provinces, while they are increasing in the most southern and driest province. The possible reasons and implications of these findings are finally discussed in relation to the main environmental issues affecting the region.

Simultaneous retrieval of selected optical water quality indicators from Landsat-8, Sentinel-2, and Sentinel-3

Constructing multi-source satellite-derived water quality (WQ) products in inland and nearshore coastal waters from the past, present, and future missions is a long-standing challenge. Despite inherent differences in sensors’ spectral capability, spatial sampling, and radiometric performance, research efforts focused on formulating, implementing, and validating universal WQ algorithms continue to evolve. This research extends a recently developed machine-learning (ML) model, i.e., Mixture Density Networks (MDNs) (Pahlevan et al., 2020; Smith et al., 2021), to the inverse problem of simultaneously retrieving WQ indicators, including chlorophyll-a (Chla), Total Suspended Solids (TSS), and the absorption by Colored Dissolved Organic Matter at 440 nm (acdom(440)), across a wide array of aquatic ecosystems. We use a database of in situ measurements to train and optimize MDN models developed for the relevant spectral measurements (400–800 nm) of the Operational Land Imager (OLI), MultiSpectral Instrument (MSI), and Ocean and Land Color Instrument (OLCI) aboard the Landsat-8, Sentinel-2, and Sentinel-3 missions, respectively. Our two performance assessment approaches, namely hold-out and leave-one-out, suggest significant, albeit varying degrees of improvements with respect to second-best algorithms, depending on the sensor and WQ indicator (e.g., 68%, 75%, 117% improvements based on the hold-out method for Chla, TSS, and acdom(440), respectively from MSI-like spectra). Using these two assessment methods, we provide theoretical upper and lower bounds on model performance when evaluating similar and/or out-of-sample datasets. To evaluate multi-mission product consistency across broad spatial scales, map products are demonstrated for three near-concurrent OLI, MSI, and OLCI acquisitions. Overall, estimated TSS and acdom(440) from these three missions are consistent within the uncertainty of the model, but Chla maps from MSI and OLCI achieve greater accuracy than those from OLI. By applying two different atmospheric correction processors to OLI and MSI images, we also conduct matchup analyses to quantify the sensitivity of the MDN model and best-practice algorithms to uncertainties in reflectance products. Our model is less or equally sensitive to these uncertainties compared to other algorithms. Recognizing their uncertainties, MDN models can be applied as a global algorithm to enable harmonized retrievals of Chla, TSS, and acdom(440) in various aquatic ecosystems from multi-source satellite imagery. Local and/or regional ML models tuned with an apt data distribution (e.g., a subset of our dataset) should nevertheless be expected to outperform our global model.

Harmonized Chlorophyll-a Retrievals in Inland Lakes From Landsat-8/9 and Sentinel 2A/B Virtual Constellation Through Machine Learning

Moderate-high resolution satellite missions provide an opportunity to capture subtle spatial variability in lakes; however, the sparsity of time series for individual satellite instruments cannot monitor temporal variation in the lake environment. To date, studies on the joint observations of chlorophyll-a (Chl-a) in inland lakes from multiple missions have been poorly reported. Here, we generated a harmonized Chl-a dataset for the lakes in the Yunnan–Guizhou Plateau in China from 2013 to 2022 by the Landsat 8/9 and Sentinel-2A/B virtual constellation. This study first examined the performance of four atmospheric correction processors to derive remote sensing reflectance (R <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">rs</sub> ) from Landsat 8/9 Operational Land Imager (OLI) and Sentinel-2A/B multispectral instrument (MSI) images. We determined that the dark spectral fitting algorithm generated better R <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">rs</sub> than the other processors, e.g., R <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">rs</sub> (561) mean absolute percentage error (MAPE)=15.2%, R <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">rs</sub> (665) MAPE=27.5%, and R <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">rs</sub> (704) MAPE=25.7%. OLI-derived R <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">rs</sub> at five visible and near-infrared bands showed satisfactory agreement with MSI (slope=0.94, MAPE=11.8%). The mixed density network outperformed the six state-of-the-art algorithms and other two machine learning models in retrieving Chl-a [MSI: MAPE=31.4% (N=109), OLI: MAPE=38.0% (N=74)]. The satisfactory agreement of Chl-a retrievals between the synchronous MSI and OLI images (N=2,293,821, MAPE=34.6%) supported the establishment of the virtual constellation. MSI- and OLI- derived Chl-a in nine major lakes in the studied area exhibited apparent seasonal variability from 2013 to 2022, particularly after 2017. Results highlight a solution to establish the Landsat/Sentinel-2 virtual constellation for improving the spatial and temporal resolutions of a database of lake water quality.

A Quick Band-to-Band Mis-Registration Detection Method for Sentinel-2 MSI Images

A band-to-band mis-registration (BBMR) error often occurs in remote sensing (RS) images acquired by multi-spectral push broom spectrometers such as the Sentinel-2 Multi-spectral Instrument (MSI), leading to adverse impacts on the reliability of further RS applications. Although the systematic band-to-band registration conducted during the image production process corrects most BBMR errors, there are still quite a few images being observed with discernible BBMR. Thus, a quick BBMR detection method is needed to assess the quality of online RS products. We here propose a hybrid framework for detecting BBMR between the visible bands in MSI images. This framework comprises three main steps: first, candidate chips are captured based on Google Earth Engine (GEE) spatial analysis functions to shrink the valid areas inside image scenes as potential target chips. The redundant data pertaining to the local operation process are thus narrowed down. Second, spectral abnormal areas are precisely extracted from inside every single chip, excluding the influences of clouds and water surfaces. Finally, the abnormal areas are matched pixel by pixel between bands, and the best-fit coordinates are then determined to compare with tolerance. Here, the proposed method was applied to 71,493 scenes of MSI Level-1C images covering China and its surrounding areas on the GEE platform. From these images, 4356 chips from 442 scenes were detected with inter-band offsets among the visible bands. Further manual visual inspection revealed that the proposed method had an accuracy of 98.07% at the chip scale and 88.46% at the scene scale.