Multispectral Airborne Laser Scanning Data Research Articles

Monitoring seedling stands using national forest inventory and multispectral airborne laser scanning data

Characterizing seedling stands with respect to their species proportions and co-occurring vegetation is important for monitoring the desired development of the forest stand. Related inventory information has traditionally been collected with costly field surveys and National Forest Inventory (NFI)-based models. Here, we present a novel fusion approach to combine remote sensing (RS)-based models and NFI-based models to predict seedling stand characteristics, i.e., height, density, and tending needs. We used the best linear unbiased predictor for the fusion of the NFI- and RS-based models. The NFI-based models were derived using NFI sample plots and stand features. The RS-based models were derived using airborne laser scanning and color–infrared images and separate field-measured data. NFI-based models were found to be rather unreliable (RMSE = 65%–115% for stem density and 59%–78% for height), but they were always available without the need for any additional RS data. RS-based models provided an RMSE of 41%–92% for stem density and 26%–45% for height. The fusion procedure used at the prediction stage consistently increased the accuracy of all variables of interest, but the improvements were minor. In addition, we classified the tending need in seedling stands if the height of the coniferous tree was less than 1 m compared to broadleaved trees. If we simulate the decision-making situation of tending needs, we can predict tending needs (91% user accuracy) fairly well for a stand.

Effect of feature standardization on reducing the requirements of field samples for individual tree species classification using ALS data

The objective of this study was to evaluate the effectiveness of three standardization approaches for airborne laser scanning (ALS) feature values used for individual tree species classification. This study is the first effort to assess the transferability of forest tree species classification models derived using monospectral and multispectral ALS data. Three research questions were asked; (1) How do the ALS features differ for the same species in different though comparable ecological regions? (2) How to train a model with one sub-population and apply it in another sub-population? (3) How to fuse models for two areas into a global model? To answer these questions, both 3D and intensity features were extracted from the ALS data from Canadian boreal forests. The ALS feature values were standardized in two different scenarios, disjoint areas, and partially overlapping areas, across three study areas. Feature standardization approaches were used: histogram matching, median-based standardization, and linear regression-based standardization. A linear discriminant analysis (LDA) and random forest (RF) algorithms were employed to classify the study area’s major tree species. The Bhattacharyya distance and overall accuracy (OA) were used to assess the classification model performance before and after the feature standardization. Three major conclusions were drawn. First, the Bhattacharyya distance confirmed that intensity features varied across study areas and among tree species, while 3D features were relatively less variable. Second, for the disjoint areas (York Regional Forest (YRF)) and Petawawa Research Forest (PRF)), the feature standardization procedure consistently improved the OA classification for both local model and global model approaches. The feature standardization improved the OA from 16% to 54% using LDA, and from 20% to 55% using RF in the local model. The improvement was from 58% to 66% using LDA, and from 63% to 70% using RF in the global model. It can be concluded that intensity features (at YRF and PRF) were most prone to differ between areas because of scanners and acquisition settings. If ALS data were available from both areas, intensity features need to be normalized so that the local model can be transferred. Finally, for the partially overlapping areas (the northern and southern parts of Black Brook Forest), this study suggests that normalization of ALS data is not needed because they were captured using quite similar ALS settings.

Classification of tree species classes in a hemi-boreal forest from multispectral airborne laser scanning data using a mini raster cell method

Classification of tree species or species classes is still a challenge for remote sensing-based forest inventory. Operational use of Airborne Laser Scanning (ALS) data for prediction of forest variables has this far been dominated by area-based methods where laser scanning data have been used for estimation of forest variables within raster cells. Classification of tree species has however not been achieved with sufficient accuracy with area-based methods using only ALS data. Furthermore, analysis of tree species at the level of raster cells with typical size of 15 m × 15 m is not ideal in the case of mixed species stands. Most ALS systems for terrestrial mapping use only one wavelength of light. New multispectral ALS systems for terrestrial mapping have recently become operational, such as the Optech Titan system with wavelengths 1550 nm, 1064 nm, and 532 nm. This study presents an alternative type of area-based method for classification of tree species classes where multispectral ALS data are used in combination with small raster cells. In this “mini raster cell method” features for classification are derived from the intensity of the different wavelengths in small raster cells using a moving window average approach to allow for a heterogeneous tree species composition. The most common tree species in the Nordic countries are Pinus sylvestris and Picea abies, constituting about 80% of the growing stock volume. The remaining 20% consists of several deciduous species, mainly Betula pendula and Betula pubescens, and often grow in mixed forest stands. Classification was done for pine (Pinus sylvestris), spruce (Picea abies), deciduous species and mixed species in middle-aged and mature stands in a study area located in hemi-boreal forest in the southwest of Sweden (N 58°27’, E 13°39’). The results were validated at plot level with the tree species composition defined as proportion of basal area of the tree species classes. The mini raster cell classification method was slightly more accurate (75% overall accuracy) than classification with a plot level area-based method (68% overall accuracy). The explanation is most likely that the mini raster cell method is successful at classifying homogenous patches of tree species classes within a field plot, while classification based on plot level analysis requires one or several heterogeneous classes of mixed species forest. The mini raster cell method also results in a high-resolution tree species map. The small raster cells can be aggregated to estimate tree species composition for arbitrary areas, for example forest stands or area units corresponding to field plots.

Individual tree detection using template matching of multiple rasters derived from multispectral airborne laser scanning data

ABSTRACT Multispectral airborne laser scanning (MS-ALS) provides information about 3D structure as well as the intensity of the reflected light and is a promising technique for acquiring forest information. Data from MS-ALS have been used for tree species classification and tree health evaluation. This paper investigates its potential for individual tree detection (ITD) when using intensity as an additional metric. To this end, rasters of height, point density, vegetation ratio, and intensity at three wavelengths were used for template matching to detect individual trees. Optimal combinations of metrics were identified for ITD in plots with different levels of canopy complexity. The F-scores for detection by template matching ranged from 0.94 to 0.73, depending on the choice of template derivation and raster generalization methods. Using intensity and point density as metrics instead of height increased the F-scores by up to 14% for the plots with the most understorey trees.

Using Leaf-Off and Leaf-On Multispectral Airborne Laser Scanning Data to Characterize Seedling Stands

Information from seedling stands in time and space is essential for sustainable forest management. To fulfil these informational needs with limited resources, remote sensing is seen as an intriguing alternative for forest inventorying. The structure and tree species composition in seedling stands have created challenges for capturing this information using sensors providing sparse point densities that do not have the ability to penetrate canopy gaps or provide spectral information. Therefore, multispectral airborne laser scanning (mALS) systems providing dense point clouds coupled with multispectral intensity data theoretically offer advantages for the characterization of seedling stands. The aim of this study was to investigate the capability of Optech Titan mALS data to characterize seedling stands in leaf-off and leaf-on conditions, as well as to retrieve the most important forest inventory attributes, such as distinguishing deciduous from coniferous trees, and estimating tree density and height. First, single-tree detection approaches were used to derive crown boundaries and tree heights from which forest structural attributes were aggregated for sample plots. To predict tree species, a random forests classifier was trained using features from two single-channel intensities (SCIs) with wavelengths of 1550 (SCI-Ch1) and 1064 nm (SCI-Ch2), and multichannel intensity (MCI) data composed of three mALS channels. The most important and uncorrelated features were analyzed and selected from 208 features. The highest overall accuracies in classification of Norway spruce, birch, and nontree class in leaf-off and leaf-on conditions obtained using SCI-Ch1 and SCI-Ch2 were 87.36% and 69.47%, respectively. The use of MCI data improved classification by up to 96.55% and 92.54% in leaf-off and leaf-on conditions, respectively. Overall, leaf-off data were favorable for distinguishing deciduous from coniferous trees and tree density estimation with a relative root mean square error (RMSE) of 37.9%, whereas leaf-on data provided more accurate height estimations, with a relative RMSE of 10.76%. Determining the canopy threshold for separating ground returns from vegetation returns was found to be critical, as mapped trees might have a height below one meter. The results showed that mALS data provided benefits for characterizing seedling stands compared to single-channel ALS systems.

Forest Inventory and Diversity Attribute Modelling Using Structural and Intensity Metrics from Multi-Spectral Airborne Laser Scanning Data

Airborne laser scanning (ALS) systems tuned to the near-infrared (NIR; 1064 nm) wavelength have become the best available data source for characterizing vegetation structure. Proliferation of multi-spectral ALS (M-ALS) data with lasers tuned at two additional wavelengths (commonly 532 nm; green, and 1550 nm; short-wave infrared (SWIR)) has promoted interest in the benefit of additional wavelengths for forest inventory modelling. In this study, structural and intensity based M-ALS metrics were derived from wavelengths independently and combined to assess their value for modelling forest inventory attributes (Lorey’s height (HL), gross volume (V), and basal area (BA)) and overstorey species diversity (Shannon index (H), Simpson index (D), and species richness (R)) in a diverse mixed-wood forest in Ontario, Canada. The area-based approach (ABA) to forest attribute modelling was used, where structural- and intensity-based metrics were calculated and used as inputs for random forest models. Structural metrics from the SWIR channel (SWIRstruc) were found to be the most accurate for H and R (%RMSE = 14.3 and 14.9), and NIRstruc were most accurate for V (%RMSE = 20.4). The addition of intensity metrics marginally increased the accuracy of HL models for SWIR and combined channels (%RMSE = 7.5). Additionally, a multi-resolution (0.5, 1, 2 m) voxel analysis was performed, where intensity data were used to calculate a suite of spectral indices. Plot-level summaries of spectral indices from each voxel resolution alone, as well as combined with structural metrics from the NIR wavelength, were used as random forest predictors. The addition of structural metrics from the NIR band reduced %RMSE for all models with HL, BA, and V realizing the largest improvements. Intensity metrics were found to be important variables in the 1 m and 2 m voxel models for D and H. Overall, results indicated that structural metrics were the most appropriate. However, the inclusion of intensity metrics, and continued testing of their potential for modelling diversity indices is warranted, given minor improvements when included. Continued analyses using M-ALS intensity metrics and voxel-based indices would help to better understand the value of these data, and their future role in forest management.

Prediction of forest canopy fuel parameters in managed boreal forests using multispectral and unispectral airborne laser scanning data and aerial images

ABSTRACT This study evaluated the suitability of different airborne laser scanning (ALS) datasets for the prediction of forest canopy fuel parameters in managed boreal forests in Finland. The ALS data alternatives were leaf-off and leaf-on unispectral and leaf-on multispectral data, alone and combined with aerial images. Canopy fuel weight, canopy base height, biomass of living and dead trees, and height and biomass of the understory tree layer were predicted using regression analysis. The considered categorical forest parameters were dominant tree species, site fertility and vertical forest structure layers. The canopy fuel weight was modeled based on crown biomass with an RMSE% value of 20–30%. The canopy base heights were predicted separately for pine and spruce stands with satisfactory results the RMSE% values being 9–10% and 15–17%, respectively. Following the initial classification of the existence of an understory layer (with kappa-values of 0.47–0.53), the prediction of understory height performed well (RMSE% 20–25%) but the understory biomass was predicted with larger RMSE% values (about 60–70%). Site fertility was classified with kappa-values of 0.5–0.6. The most accurate results were obtained using multispectral ALS data, although the differences between the datasets were minor.

Toward utilizing multitemporal multispectral airborne laser scanning, Sentinel-2, and mobile laser scanning in map updating

The rapid development of remote sensing technologies provides interesting possibilities for the further development of nationwide mapping procedures that are currently based mainly on passive aerial images. In particular, we assume that there is a large undiscovered potential in multitemporal airborne laser scanning (ALS) for topographic mapping. In this study, automated change detection from multitemporal multispectral ALS data was tested for the first time. The results showed that direct comparisons between height and intensity data from different dates reveal even small changes related to the development of a suburban area. A major challenge in future work is to link the changes with objects that are interesting in map production. In order to effectively utilize multisource remotely sensed data in mapping in the future, we also investigated the potential of satellite images and ground-based data to complement multispectral ALS. A method for continuous change monitoring from a time series of Sentinel-2 satellite images was developed and tested. Finally, a high-density point cloud was acquired with terrestrial mobile laser scanning and automatically classified into four classes. The results were compared with the ALS data, and the possible roles of the different data sources in a future map updating process were discussed.

MULTISPECTRAL AIRBORNE LASER SCANNING POINT-CLOUDS FOR LAND COVER CLASSIFICATION USING CONVOLUTIONAL NEURAL NETWORKS

Abstract. This paper presents an automated workflow for pixel-wise land cover (LC) classification from multispectral airborne laser scanning (ALS) data using deep learning methods. It mainly contains three procedures: data pre-processing, land cover classification, and accuracy assessment. First, a total of nine raster images with different information were generated from the pre-processed point clouds. These images were assembled into six input data combinations. Meanwhile, the labelled dataset was created using the orthophotos as the ground truth. Also, three deep learning networks were established. Then, each input data combination was used to train and validate each network, which developed eighteen LC classification models with different parameters to predict LC types for pixels. Finally, accuracy assessments and comparisons were done for the eighteen classification results to determine an optimal scheme. The proposed method was tested on six input datasets with three deep learning classification networks (i.e., 1D CNN, 2D CNN, and 3D CNN). The highest overall classification accuracy of 97.2% has been achieved using the proposed 3D CNN. The overall accuracy (OA) of the 2D and 3D CNNs was, on average, 8.4% higher than that of the 1D CNN. Although the OA of the 2D CNN was at most 0.3% lower than that of the 3D CNN, the runtime of the 3D CNN was five times longer than the 2D CNN. Thus, the 2D CNN was the best choice for the multispectral ALS LC classification when considering efficiency. The results demonstrated the proposed methods can successfully classify land covers from multispectral ALS data.

Nearest neighbor imputation of logwood volumes using bi-temporal ALS, multispectral ALS and aerial images

ABSTRACTWe examine the nearest neighbor (NN) imputation of species-specific logwood volumes using airborne laser scanning (ALS) data and aerial images. We compare different remote sensing (RS) data combinations as predictor variables in an area-based prediction of logwood volumes using separate training and validation data. We include multispectral leaf-on ALS data, bi-temporal leaf-off ALS data and aerial images in the analyses. Two response configurations are used in the NN imputations: (1) simultaneous imputation in which species-specific logwood volumes are response variables, and (2) separate imputation by tree species in which the attributes of one tree species at a time are response variables. Although an unrealistic alternative in practical implementation, the combination of leaf-on and leaf-off ALS metrics as predictors proved to be the most successful RS data combination, according to the RMSE values associated with the predicted species-specific and dominant logwood volumes. The results showed that older leaf-off ALS data perform well in combination with leaf-on ALS data. In general, predictive performance was better with simultaneous imputation than with separate imputation by tree species. Our finding promotes an awareness of how best to utilize various RS data in future forest inventories.

The effect of seasonal variation on automated land cover mapping from multispectral airborne laser scanning data

ABSTRACTMultispectral airborne laser scanning (MS-ALS) sensors are a new promising source of data for automated mapping methods. Finding an optimal time for data acquisition is important in all mapping applications based on remotely sensed datasets. In this study, three MS-ALS datasets acquired at different times of the growing season were compared for automated land cover mapping and road detection in a suburban area. In addition, changes in the intensity were studied. An object-based random forest classification was carried out using reference points. The overall accuracy of the land cover classification was 93.9% (May dataset), 96.4% (June) and 95.9% (August). The use of the May dataset acquired under leafless conditions resulted in more complete roads than the other datasets acquired when trees were in leaf. It was concluded that all datasets used in the study are applicable for suburban land cover mapping, however small differences in accuracies between land cover classes exist.

Quantifying the Carbon Storage in Urban Trees Using Multispectral ALS Data

This paper presents a new method for quantifying the carbon storage in urban trees using multispectral airborne laser scanning (ALS) data. This method takes the full advantage of multispectral ALS range and intensity data and shows the feasibility of quantifies the carbon storage in urban trees. Our method consists of four steps: multispectral ALS data processing, vegetation isolation, dendrometric parameters estimation, and carbon storage modeling. Our results suggest that ALS-based dendrometric parameter estimation and allometric models can yield consistent performance and accurate estimation. Citywide carbon storage estimation is derived in this paper for the Town of Whitchurch–Stouffville, Ontario, Canada, by extrapolating the values within the study area to the entire city based on the specific proportion of each land cover type. The proposed method reveals the potential of multispectral ALS data in land cover mapping and carbon storage estimation at individual-tree level.

A new method for 3D individual tree extraction using multispectral airborne LiDAR point clouds

Characterization of individual trees is essential for many applications in forest management and ecology. Previous studies relied on single tree detection from monochromatic wavelength airborne laser scanning (ALS) systems and they focused on the use of the geometric spatial information of the point clouds (i.e., X, Y, and Z coordinates). However, there is quite often a difficulty dealing with clumped trees when only the geometric spatial information is considered. The emergence of multispectral LiDAR sensors provides a new solution for individual tree structure acquisition. The aim of this paper is to investigate the performance of multispectral ALS data for delineating individual trees which are challenging by using the monochromatic wavelength ALS system. The proposed workflow utilizes the mean shift segmentation method on different feature spaces for crown isolation. In addition, both spatial domain and multispectral domain are used to refine the under-segmentation crown segments. Ten plots (2 sets of different structural complexity) located in the dense coniferous forest area in Tobermory, Ontario, Canada are selected as experiment data. Results show that the developed method correctly detects 88% and 82% of the dominant trees with and without multispectral information, respectively. Compared with segmentation using geometric spatial information solely, the main improvements are achieved for clumped tree segment with the distinguished multispectral features. This study demonstrates that multispectral airborne laser scanning data is more capable for individual tree delineation than monochromatic wavelength laser scanning data in dealing with forests with clumped crowns in dense forests.

Exploring Multispectral ALS Data for Tree Species Classification

Multispectral Airborne Laser Scanning (ALS) is a new technology and its output data have not been fully explored for tree species classification purposes. The objective of this study was to investigate what type of features from multispectral ALS data (wavelengths of 1550 nm, 1064 nm and 532 nm) are best suited for tree species classification. Remote sensing data were gathered over hemi-boreal forest in southern Sweden (58°27′18.35″N, 13°39′8.03″E) on 21 July 2016. The field data consisted of 179 solitary trees from nine genera and ten species. Two new methods for feature extraction were tested and compared to features of height and intensity distributions. The features that were most important for tree species classification were intensity distribution features. Features from the upper part of the upper and outer parts of the crown were better for classification purposes than others. The best classification model was created using distribution features of both intensity and height in multispectral data, with a leave-one-out cross-validated accuracy of 76.5%. As a comparison, only structural features resulted in an highest accuracy of 43.0%. Picea abies and Pinus sylvestris had high user’s and producer’s accuracies and were not confused with any deciduous species. Tilia cordata was the deciduous species with a large sample that was most frequently confused with many other deciduous species. The results, although based on a small and special data set, suggest that multispectral ALS is a technology with great potential for tree species classification.

Object-based analysis of multispectral airborne laser scanner data for land cover classification and map updating

During the last 20years, airborne laser scanning (ALS), often combined with passive multispectral information from aerial images, has shown its high feasibility for automated mapping processes. The main benefits have been achieved in the mapping of elevated objects such as buildings and trees. Recently, the first multispectral airborne laser scanners have been launched, and active multispectral information is for the first time available for 3D ALS point clouds from a single sensor. This article discusses the potential of this new technology in map updating, especially in automated object-based land cover classification and change detection in a suburban area. For our study, Optech Titan multispectral ALS data over a suburban area in Finland were acquired. Results from an object-based random forests analysis suggest that the multispectral ALS data are very useful for land cover classification, considering both elevated classes and ground-level classes. The overall accuracy of the land cover classification results with six classes was 96% compared with validation points. The classes under study included building, tree, asphalt, gravel, rocky area and low vegetation. Compared to classification of single-channel data, the main improvements were achieved for ground-level classes. According to feature importance analyses, multispectral intensity features based on several channels were more useful than those based on one channel. Automatic change detection for buildings and roads was also demonstrated by utilising the new multispectral ALS data in combination with old map vectors. In change detection of buildings, an old digital surface model (DSM) based on single-channel ALS data was also used. Overall, our analyses suggest that the new data have high potential for further increasing the automation level in mapping. Unlike passive aerial imaging commonly used in mapping, the multispectral ALS technology is independent of external illumination conditions, and there are no shadows on intensity images produced from the data. These are significant advantages in developing automated classification and change detection procedures.

Feasibility of Multispectral Airborne Laser Scanning Data for Road Mapping

Multispectral airborne laser scanning (ALS) data have recently become available. The objective of this letter is to study the feasibility of these data for road mapping—for road detection and road surface classification. The results are compared with the results of traditional aerial ortho images using object-based image analysis and Random Forest classification. The results demonstrate that the multispectral ALS data are feasible for automatic road detection and a significant improvement compared to the use of optical aerial imagery is obtained. In a test using ALS data, 80.5% points representing roads were classified correctly. When aerial images were used, the percentage decreased to 71.6%.

Single-Sensor Solution to Tree Species Classification Using Multispectral Airborne Laser Scanning

This paper investigated the potential of multispectral airborne laser scanning (ALS) data for individual tree detection and tree species classification. The aim was to develop a single-sensorsolution for forest mapping that is capable of providing species-specific information, required for forest management and planning purposes. Experiments were conducted using 1903 ground measured trees from 22 sample plots and multispectral ALS data, acquired with an Optech Titan scanner over a boreal forest, mainly consisting of Scots pine (Pinus Sylvestris), Norway spruce (Picea Abies), and birch (Betula sp.), in southern Finland. ALS-features used as predictors for tree species were extracted from segmented tree objects and used in random forest classification. Different combinations of features, including point cloud features, and intensity features of single and multiple channels, were tested. Among the field-measured trees, 61.3% were correctly detected. The best overall accuracy (OA) of tree species classification achieved for correctly-detected trees was 85.9% (Kappa = 0.75), using a point cloud and single-channel intensity features combination, which was not significantly different from the ones that were obtained either using all features (OA = 85.6%, Kappa = 0.75), or single-channel intensity features alone (OA = 85.4%, Kappa = 0.75). Point cloud features alone achieved the lowest accuracy, with an OA of 76.0%. Field-measured trees were also divided into four categories. An examination of the classification accuracy for four categories of trees showed that isolated and dominant trees can be detected with a detection rate of 91.9%, and classified with a high overall accuracy of 90.5%. The corresponding detection rate and accuracy were 81.5% and 89.8% for a group of trees, 26.4% and 79.1% for trees next to a larger tree, and 7.2% and 53.9% for trees situated under a larger tree, respectively. The results suggest that Channel 2 (1064 nm) contains more information for separating pine, spruce, and birch, followed by channel 1 (1550 nm) and channel 3 (532 nm) with an overall accuracy of 81.9%, 78.3%, and 69.1%, respectively. Our results indicate that the use of multispectral ALS data has great potential to lead to a single-sensor solution for forest mapping.

MULTISPECTRAL AIRBORNE LASER SCANNING FOR AUTOMATED MAP UPDATING

Abstract. During the last 20 years, airborne laser scanning (ALS), often combined with multispectral information from aerial images, has shown its high feasibility for automated mapping processes. Recently, the first multispectral airborne laser scanners have been launched, and multispectral information is for the first time directly available for 3D ALS point clouds. This article discusses the potential of this new single-sensor technology in map updating, especially in automated object detection and change detection. For our study, Optech Titan multispectral ALS data over a suburban area in Finland were acquired. Results from a random forests analysis suggest that the multispectral intensity information is useful for land cover classification, also when considering ground surface objects and classes, such as roads. An out-of-bag estimate for classification error was about 3% for separating classes asphalt, gravel, rocky areas and low vegetation from each other. For buildings and trees, it was under 1%. According to feature importance analyses, multispectral features based on several channels were more useful that those based on one channel. Automatic change detection utilizing the new multispectral ALS data, an old digital surface model (DSM) and old building vectors was also demonstrated. Overall, our first analyses suggest that the new data are very promising for further increasing the automation level in mapping. The multispectral ALS technology is independent of external illumination conditions, and intensity images produced from the data do not include shadows. These are significant advantages when the development of automated classification and change detection procedures is considered.

MULTISPECTRAL AIRBORNE LASER SCANNING FOR AUTOMATED MAP UPDATING

During the last 20 years, airborne laser scanning (ALS), often combined with multispectral information from aerial images, has shown its high feasibility for automated mapping processes. Recently, the first multispectral airborne laser scanners have been launched, and multispectral information is for the first time directly available for 3D ALS point clouds. This article discusses the potential of this new single-sensor technology in map updating, especially in automated object detection and change detection. For our study, Optech Titan multispectral ALS data over a suburban area in Finland were acquired. Results from a random forests analysis suggest that the multispectral intensity information is useful for land cover classification, also when considering ground surface objects and classes, such as roads. An out-of-bag estimate for classification error was about 3% for separating classes asphalt, gravel, rocky areas and low vegetation from each other. For buildings and trees, it was under 1%. According to feature importance analyses, multispectral features based on several channels were more useful that those based on one channel. Automatic change detection utilizing the new multispectral ALS data, an old digital surface model (DSM) and old building vectors was also demonstrated. Overall, our first analyses suggest that the new data are very promising for further increasing the automation level in mapping. The multispectral ALS technology is independent of external illumination conditions, and intensity images produced from the data do not include shadows. These are significant advantages when the development of automated classification and change detection procedures is considered.