Multiple Spreading Codes Research Articles

Constrained Tensor Modeling Approach to Blind Multiple-Antenna CDMA Schemes

In this paper, we consider an uplink multiple-antenna code-division multiple-access (CDMA) system linking several multiple-antenna mobile users to one multiple-antenna base station. For this system, a constrained third-order tensor decomposition is introduced for modeling the multiple-antenna transmitter as well as the received signal. The constrained structure of the proposed tensor decomposition is characterized by two constraint matrices that have a meaningful physical interpretation in our context. They can be viewed as canonical allocation matrices that define the allocation of users' data streams and spreading codes to the transmit antennas. The distinguishing features of the proposed tensor modeling with respect to the already existing tensor-based CDMA models are: i) it copes with multiple transmit antennas and spreading codes per user and ii) it models several spatial spreading/multiplexing schemes with multiple spreading codes by controlling the constrained structure of the tensor signal model. A systematic design procedure for the canonical allocation matrices leading to a unique blind symbol (or joint blind symbol-code) recovery is proposed which allows us to derive a finite set of multiple-antenna schemes for a fixed number of transmit antennas. Identifiability of the proposed tensor model is discussed, and a blind multiuser detection receiver based on the alternating least squares algorithm is considered for performance evaluation of several multiple-antenna CDMA schemes derived from the constrained modeling approach.

Utility-based joint power and rate allocation for downlink CDMA with blind multiuser detection

We treat utility-based joint power control and rate allocation in a downlink code division multiple access system, where either the matched-filter or the blind multiuser detection technique is employed at the mobile receivers. Rate allocation is performed on a per-frame basis; whereas within the frame, power control is performed at the symbol basis. A hierarchical rate allocation scheme is proposed, which together with the utility-based power control and the opportunistic fair scheduling scheme, maximizes the instantaneous weighted system throughput and the number of feasible users, and at the same time, guarantees the fairness among all users. In order to apply such a resource allocation framework to systems employing blind multiuser detection, we make use of the recent analytical results on the signal-to-interference-plus-noise-ratio performance of the blind multiuser detectors, assuming multiple spreading codes are used to realize multiple data rates. Our results show that under the utility-based joint power and rate allocation framework, the system capacity is significantly enhanced by using blind multiuser detection and the fairness can be well guaranteed.

A Medium Access Control Protocol for Voice/Data Integrated Wireless CDMA Systems

In this paper, a medium access control protocol is proposed for integrated voice and data services in wireless local networks. Uplink channels for the proposed protocol are composed of time slots with multiple spreading codes per slot based on slotted code division multiple access (CDMA) systems. The proposed protocol uses spreading code sensing and reservation schemes. This protocol gives higher access priority to delay-sensitive voice traffic than to data traffic. The voice terminal reserves an available spreading code to transmit multiple voice packets during a talkspurt. On the other hand, the data terminal transmits a packet without making a reservation over one of the available spreading codes that are not used by voice terminals. In this protocol, voice packets do not come into collision with data packets. The numerical results show that this protocol can increase the system capacity for voice service by applying the reservation scheme. The performance for data traffic will decrease in the case of high voice traffic load because of its low access priority. But it shows that the data traffic performance can be increased in proportion to the number of spreading codes.

A MAC protocol for integrated voice/data services in the local wireless CDMA communication networks

A medium access control protocol is proposed for the integrated voice and data services in the local wireless networks, and the performance of the proposed protocol is analyzed. Uplink channels for the proposed protocol are composed of time slots with multiple spreading codes per slot based on WB-TD/CDMA. The proposed protocol uses spreading code sensing and reservation schemes. This protocol gives a higher priority to the delay-sensitive voice traffic than to the data traffic. When a talkspurt begins, the voice terminal reserves an available spreading code to transmit multiple voice packets. On the other hand, whenever a data packet is generated, the data terminal transmits the packet over one of the available spreading codes that are not used by the voice terminals. In this protocol, the voice packets do not come into collision with the data packets. The numerical results show that this protocol can increase the system capacity for voice service by applying the reservation scheme. The performance for the data traffic will decrease in the case of the high voice traffic load because of its low access priority. But it shows that the data traffic performance can be increased in proportion to the number of spreading codes.

An advanced channel access scheme for integrated multimedia services with various bit rates in CDMA networks

For efficient code sharing among users, a wireless medium access control (MAC) protocol for CDMA networks is proposed, which supports connection-oriented, as well as connectionless, services and provides the various bit rates needed for the integrated multimedia services. The proposed MAC protocol allows mobile terminals to use multiple slots and spreading codes based on contention and reservation. Optimum frequency resources are allocated to the connection-oriented and connectionless services with various bit rates. Waiting and response times in the first contention are reduced, and the overall mean delay time is typically minimized in the case of connectionless bulky traffic.

Bit error probability analysis for FRAMES WCDMA downlink receivers

The wide-band code-division multiple-access (WCDMA) concept FMA2 developed in the European Future Radio Wide-Band Multiple-Access Systems (FRAMES) project supports variable-data-rate transmission. The data rate can be altered by changing either the spreading factor or by using multiple spreading codes in parallel. In order to facilitate flexible changing of the data rate, variable-length orthogonal Walsh codes are used for channel separation, followed by the scrambling code. Optional short scrambling codes can be used if interference suppression is used. The downlink performance of the FMA2 system using both the conventional RAKE and LMMSE-RAKE receivers is studied. According to the numerical results, the performance of the conventional RAKE receivers is significantly degraded at the highest data rates, whereas the LMMSE-RAKE performs well in those cases also.

Multiple access in wireless digital networks

General principles for the design of a multiple-access system for large numbers of terminals transmitting to a single hub station are discussed. The importance of understanding the nature of the traffic to be carried by the network is emphasized. After some discussion of multiple access options for steady traffic and for slowly varying traffic, the use of random-access protocols for rapidly varying traffic is explained. Two general random-access protocols have been used in a variety of data networks, ALOHA and CDMA. Although these two techniques have different origins and are generally thought of as separate, they are in fact but different ways of looking at the same basic signals. The author shows that the use of multiple spreading codes in a CDMA network is not necessary in order to achieve multiple access capability. A single code can greatly reduce the complexity of a CDMA system. He introduces a spread-spectrum version of an ALOHA channel (spread ALOHA) which is equivalent to a CDMA channel with a common spreading code for all users. The equivalence the author demonstrates opens the door to a variety of techniques commonly used in ALOHA channels which can significantly increase both the throughput and the efficiency of the spread-spectrum channel.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">&gt;</ETX>