Multiple Metal Sites Research Articles

C-H amination chemistry mediated by trinuclear Cu(I) sites supported by a ligand scaffold featuring an arene platform and tetramethylguanidinyl residues.

Tripodal ligands that can encapsulate single or multiple metal sites in C3-symmetric geometric configurations constitute valuable targets for novel catalysts. Of particular interest in ligand development are efforts toward incorporating apical elements that exhibit little if any electron donicity, to enhance the electrophilic nature of a trans positioned active oxidant (e.g., metal-oxo, -nitrene). The tripodal ligand TMG3trphen-Arene has been synthesized, featuring an arene platform 1,3,5-substituted with phenylene arms possessing tetramethylguanidinyl (TMG) residues. Compound [(TMG3trphen-Arene)Cu3(μ-Cl)3] has been subsequently synthesized by extracting a Cu3(μ-Cl)3 cluster from anhydrous CuCl and shown to encapsulate a crown-shaped Cu3(μ-Cl)3 fragment, supported by Cu-NTMG bonds and modest Cu3⋯arene long-range contacts. Energy decomposition analysis (EDA) indicates that electrostatic contributions to the total interaction energy far exceed those due to orbital interactions. The latter involve orbital pairings largely associated with the NTMG stabilization of the Cu3(μ-Cl)3 cluster. The independent gradient model based on the Hirshfeld partition (IGMH) corroborates that contacts between the arene platform and the Cu3 triangle are noncovalent in nature. Catalyst [(TMG3trphen-Arene)Cu3(μ-Cl)3] enables amination of sec-benzylic and tert-C-H bonds of a panel of substrates by pre-synthesized PhINTces in solvent matrices that incorporate small amounts of HFIP. The involvement of an electrophilic aminating agent is evidenced by the better yields obtained for electron-rich benzylic sites and is further supported by Hammett analysis that reveals the development of a small positive charge during C-H bond activation. A rather modest KIE effect (2.1) is obtained from intramolecular H(D) competition in the amination of ethylbenzene, at the borderline of reported values for concerted and stepwise C-H amination systems. DFT analysis of the putative copper-nitrene oxidant indicates that the nitrene N atom is bridging between two copper sites in closely spaced triplet (ground state) and broken-symmetry singlet electronic configurations.

Ru Single Atom Dispersed Cu Nanoparticle with Dual Sites Enables Outstanding Photocatalytic CO2 Reduction.

Cu-based catalysts are promising candidates for CO2 reduction owing to the favorable energetics of Cu sites for CO2 adsorption and transformation. However, CO2 reduction involving insurmountable activation barriers and various byproducts remains a significant challenge to achieve high activity and selectivity. Herein, a photocatalyst constructed with single-Ru-site-on-Cu-nanoparticle on Bi4Ti3O12 exhibits exceptional activity and selectivity for CO2 conversion to CO. The experimental and theoretical results consistently reveal that the Ru-Cu dual sites allow the rapid transfer of photogenerated carriers for closely interacting with CO2 molecules. Importantly, the Ru-Cu dual sites exhibit extremely strong CO2 adsorption ability, and the Gibbs free energy of the rate-determining step (*CO2 to *COOH) has been significantly reduced, synergistically enhancing the entire CO2 conversion process. The optimal BTOCu2Ru0.5 photocatalyst manifests a high performance for selective reduction of CO2 to CO, yielding 10.84 μmol over 15 mg of photocatalyst in 4 h (180.67 μmol·g-1·h-1) under a 300 W Xe lamp without any photosensitizer and sacrificial reagent, outperforming all bismuth-based materials and being one of the best photocatalysts ever reported under similar reaction conditions. This work presents a strategy for the rational design of multiple metal sites toward efficient photocatalytic reduction of CO2.

Anion Modulation of Ag-Imidazole Cuboctahedral Cage Microenvironments for Efficient Electrocatalytic CO2 Reduction.

How to achieve CO2 electroreduction in high efficiency is a current challenge with the mechanism not well understood yet. The metal-organic cages with multiple metal sites, tunable active centers, and well-defined microenvironments may provide a promising catalyst model. Here, we report self-assembly of Ag4L4 type cuboctahedral cages from coordination dynamic Ag+ ion and triangular imidazolyl ligand 1,3,5-tris(1-benzylbenzimidazol-2-yl) benzene (Ag-MOC-X, X=NO3, ClO4, BF4) via anion template effect. Notably, Ag-MOC-NO3 achieves the highest CO faradaic efficiency in pH-universal electrolytes of 86.1 % (acidic), 94.1 % (neutral) and 95.3 % (alkaline), much higher than those of Ag-MOC-ClO4 and Ag-MOC-BF4 with just different counter anions. In situ attenuated total reflection Fourier transform infrared spectroscopy observes formation of vital intermediate *COOH for CO2-to-CO conversion. The density functional theory calculations suggest that the adsorption of CO2 on unsaturated Ag-site is stabilized by C-H⋅⋅⋅O hydrogen-bonding of CO2 in a microenvironment surrounded by three benzimidazole rings, and the activation of CO2 is dependent on the coordination dynamics of Ag-centers modulated by the hosted anions through Ag⋅⋅⋅X interactions. This work offers a supramolecular electrocatalytic strategy based on Ag-coordination geometry and host-guest interaction regulation of MOCs as high-efficient electrocatalysts for CO2 reduction to CO which is a key intermediate in chemical industry process.

Anion Modulation of Ag‐Imidazole Cuboctahedral Cage Microenvironments for Efficient Electrocatalytic CO2 Reduction

AbstractHow to achieve CO2 electroreduction in high efficiency is a current challenge with the mechanism not well understood yet. The metal‐organic cages with multiple metal sites, tunable active centers, and well‐defined microenvironments may provide a promising catalyst model. Here, we report self‐assembly of Ag4L4 type cuboctahedral cages from coordination dynamic Ag+ ion and triangular imidazolyl ligand 1,3,5‐tris(1‐benzylbenzimidazol‐2‐yl) benzene (Ag‐MOC‐X, X=NO3, ClO4, BF4) via anion template effect. Notably, Ag‐MOC‐NO3 achieves the highest CO faradaic efficiency in pH‐universal electrolytes of 86.1 % (acidic), 94.1 % (neutral) and 95.3 % (alkaline), much higher than those of Ag‐MOC‐ClO4 and Ag‐MOC‐BF4 with just different counter anions. In situ attenuated total reflection Fourier transform infrared spectroscopy observes formation of vital intermediate *COOH for CO2‐to‐CO conversion. The density functional theory calculations suggest that the adsorption of CO2 on unsaturated Ag‐site is stabilized by C−H⋅⋅⋅O hydrogen‐bonding of CO2 in a microenvironment surrounded by three benzimidazole rings, and the activation of CO2 is dependent on the coordination dynamics of Ag‐centers modulated by the hosted anions through Ag⋅⋅⋅X interactions. This work offers a supramolecular electrocatalytic strategy based on Ag‐coordination geometry and host–guest interaction regulation of MOCs as high‐efficient electrocatalysts for CO2 reduction to CO which is a key intermediate in chemical industry process.

On the nature of Con±/0 clusters reacting with water and oxygen

Bulk cobalt does not react with water at room temperature, but cobalt nanometals could yield corrosion at ambient conditions. Insights into the cobalt cluster reactions with water and oxygen enable us to better understand the interface reactivity of such nanometals. Here we report a comprehensive study on the gas-phase reactions of Con±/0 clusters with water and oxygen. All these Con±/0 clusters were found to react with oxygen, but only anionic cobalt clusters give rise to water dissociation whereas the cationic and neutral ones are limited to water adsorption. We elucidate the influences of charge states, bonding modes and dehydrogenation mechanism of water on typical cobalt clusters. It is unveiled that the additional electron of anionic Con– clusters is not beneficial to H2O adsorption, but allows for thermodynamics- and kinetics-favourable H atom transfer and dehydrogenation reactions. Apart from the charge effect, size effect and spin effect play a subtle role in the reaction process. The synergy of multiple metal sites in Con– clusters reduces the energy barrier of the rate-limiting step enabling hydrogen release. This finding of water dissociation on cobalt clusters put forward new connotations on the activity series of metals, providing new insights into the corrosion mechanism of cobalt nanometals.

Insight into coupled Ni-Co dual-metal atom catalysts for efficient synergistic electrochemical CO2 reduction

The development of highly active, selective, and stable electrocatalysts can facilitate the effective implementation of electrocatalytic CO2 conversion into fuels or chemicals for mitigating the energy crisis and climate problems. Therefore, it is necessary to achieve the goal through reasonable material design based on the actuality of the operational active site at the molecular scale. Inspired by the stimulating synergistic effect of coupled heteronuclear metal atoms, a novel Ni-Co atomic pairs configuration (denoted as NiN3©CoN3-NC) active site was theoretically screened out for improving electrochemical CO2 reduction reaction (CO2RR). The structure of NiN3©CoN3-NC was finely regulated by adjusting Zn content in the precursors Zn/Co/Ni-zeolite imidazolate frameworks (Zn/Co/Ni-ZIFs) and pyrolysis temperature. The structural features of NiN3©CoN3-NC were systematically confirmed by aberration-corrected HAADF-STEM coupled with 3D atom-overlapping Gaussian-function fitting mapping, XAFS, and XRD. The results of theoretical calculations reveal that the synergistic effect of Ni-Co atomic pairs can effectively promote the *COOH intermediate formation and thus the overall CO2RR kinetic was improved, and also restrained the competitive hydrogen evolution reaction. Due to the attributes of Ni-Co atomic pairs configuration, the developed NiN3©CoN3-NC with superior catalytic activity, selectivity, and durability, with a high turnover frequency of 2265 h−1 at −1.1 V (vs. RHE) and maximum Faradaic efficiency of 97.7% for CO production. This work demonstrates the great potential of DACs as highly efficient catalysts for CO2RR, provides a useful strategy to design heteronuclear DACs, exploits the synergistic effect of multiple metal sites to facilitate complex CO2RR catalytic reactions, and inspires more efforts to develop the potential of DACs in various fields.

Rare‐Earth Doped Configurational Entropy Stabilized High Entropy Spinel Oxide as an Efficient Anchoring/Catalyst Functional Interlayer for High‐Performance Lithium‐Sulfur Battery

AbstractLithium‐sulfur batteries (LSBs) are one of the most promising and potential modern‐day energy storage devices due to the low‐cost sulfur‐based cathode and remarkably high energy density (∼2600 Wh kg−1). However, the detrimental shuttle effect of lithium polysulfide (LiPS) and the sluggish electrochemical redox kinetics of lithium sulfide (Li2S) formation restrict its commercial viability. Herein, we design a novel transition metal‐rare earth high entropy oxide (TM‐RE HEO) Co0.08Mn0.08Ni0.08Fe1.96Mg0.08Nd0.01Gd0.01Sm0.01Pr0.01O4 as a polysulfide adsorbent and catalyst for the redox reactions of sulfur species in Li−S battery. TM‐RE HEO interlayer exhibits an excellent discharge capacity of 1146 mAh g−1 at 0.1 C rate, high rate capability, and reasonable long‐term cycling stability at 0.5 C rate with a low capacity decay of 0.08 % per cycle after 300 cycles. High degree of chemical confinement of soluble polysulfides, as demonstrated by the strong bonding between TM‐RE HEO and Li2S6, and expedited catalytic conversion to insoluble Li2S, result from strong polar catalytically active multiple metal sites and abundant oxygen vacancies. This work demonstrates the potential of high entropy oxide in developing high‐efficiency LSB technology.

Alkaline Media Regulated NiFe-LDH-Based Nickel–Iron Phosphides toward Robust Overall Water Splitting

The search for low-cost, high-performance, and robust stability bifunctional electrocatalysts to substitute noble metals-based counterparts for overall water splitting to generate clean and sustainable hydrogen energy is of great significance and challenges. Herein, a high-efficient bi-functional nickel–iron phosphide on NiFe alloy foam (denoted as e-NFP/NFF) with 3D coral-like nanostructure was controllably constructed by means of alkali etching and the introduction of non-metallic atoms P. The unique superhydrophilic coral-like structure can not only effectively facilitate the exposure of catalytic active sites and increase the electroactive surface area, but also accelerate charge transport and bubble release. Furthermore, owing to the synergistic effect between the bicomponent of nickel–iron phosphides as well as the strong electronic interactions of the multiple metal sites, the as-fabricated catalyst behaves with excellent bifunctional performance for the hydrogen evolution reaction (overpotentials of 132 and 286 mV at 10 and 300 mA·cm−2, respectively) and oxygen evolution reaction (overpotentials of 181 and 303 mV at 10 and 300 mA·cm−2, respectively) in alkaline electrolytes. Impressively, cells with integrated e-NFP/NFF electrodes as a cathode and anode require only a low cell voltage (1.58 V) to drive a current density of 10 mA·cm−2 for overall water splitting, along with remarkable stability in long-term electrochemical durability tests. This study provides a tunable synthetic strategy for the development of efficient and durable non-noble metal bifunctional catalysts based on the construction of an elaborate structure framework and rational design of the electronic structure.

Ultra-Dilute high-entropy alloy catalyst with core-shell structure for high-active hydrogenation of furfural to furfuryl alcohol at mild temperature

Furfuryl Alcohol (FOL) from the catalytic hydrogenation of furfural represented a promising intermediate for industrial application. However, the high selectively of FOL in mild temperature was limited due to the over hydrogenation. Here, we synthesized the novel ultra-dilute high-entropy alloys (HEAs) with multiple metal sites and core–shell structure for boosting the selectivity of furfural hydrogenation to furfuryl alcohol. The results showed that the furfural was converted to FOL with the conversion of 87.32% and selectivity of 100% at 90℃ over ultra-dilute HEA (NiCoCuZnFe/C-800). The catalyst had redistribution of electrons between Cu (2.00) and atomically dispersed Zn (1.65) due to the different electronegativity. The electron-rich Cu repelled the furan ring and prevented the over hydrogenation, while the atomically dispersed Zn presented the strongest –CHO adsorption performance. Moreover, the core–shell structure enhanced the stability of the catalysts during hydrogenation reaction and the porous carbon shell improved the transferring of furfural and electronic.

Plasma-Assisted Dinitrogen Activation via Dual Platinum Cluster Catalysis: A Strategy for Ammonia Synthesis under Mild Conditions

Plasma-Assisted Dinitrogen Activation via Dual Platinum Cluster Catalysis: A Strategy for Ammonia Synthesis under Mild Conditions

5f Covalency Synergistically Boosting Oxygen Evolution of UCoO4 Catalyst.

Electronic structure modulation among multiple metal sites is key to the design of efficient catalysts. Most studies have focused on regulating 3d transition-metal active ions through other d-block metals, while few have utilized f-block metals. Herein, we report a new class of catalyst, namely, UCoO4 with alternative CoO6 and 5f-related UO6 octahedra, as a unique example of a 5f-covalent compound that exhibits enhanced electrocatalytic oxygen evolution reaction (OER) activity because of the presence of the U 5f–O 2p–Co 3d network. UCoO4 exhibits a low overpotential of 250 mV at 10 mA cm–2, surpassing other unitary cobalt-based catalysts ever reported. X-ray absorption spectroscopy revealed that the Co2+ ion in pristine UCoO4 was converted to high-valence Co3+/4+, while U6+ remained unchanged during the OER, indicating that only Co was the active site. Density functional theory calculations demonstrated that the OER activity of Co3+/4+ was synergistically enhanced by the covalent bonding of U6+-5f in the U 5f–O 2p–Co 3d network. This study opens new avenues for the realization of electronic structure manipulation via unique 5f involvement.

Three-dimensional Co/Ni bimetallic organic frameworks for high-efficient catalytic ozonation of atrazine: Mechanism, effect parameters, and degradation pathways analysis

Herein, the potential of bimetallic MOFs in catalytic ozonation was investigated for the first time. Three novel ozonation catalysts, i.e. cobalt-based, nickel-based and cobalt/nickel-based metal-organic frameworks (Co-MOF, Ni-MOF and Co/Ni-MOF), were synthesized, characterized by XRD, SEM, N2 sorption-desorption isotherms, FTIR and XPS, and applied in catalytic ozonation for atrazine removal. It was found that the catalysts showed outstanding performance in the catalytic ozonation, especially Co/Ni-MOF which was attributed to multiple metal sites, higher coordination unsaturation, metal centers with larger electron density, and better efficiency in electron transfer than its single-metal counterparts. Under specific experimental conditions, 47.8%, 67.0%, 75.5%, and 93.9% of atrazine were removed after adsorption and degradation in the ozonation system without catalyst, and the catalytic ozonation systems with Co-MOF, Ni-MOF and Co/Ni-MOF, respectively. Higher removal rates could be achieved by growing initial pH, increasing oxidant dosage and reducing pollutant concentration, while an excess of Co/Ni-MOF was not favorable for the catalytic ozonation. Surface hydroxyl groups and acid sites were considered as the critical catalytic sites on Co/Ni-MOF. From the results of EPR tests, O2·-, 1O2 and ·OH were ascertained as the main reactive species in the degradation. It was suspected that O2·- and H2O2 played important roles in the formation of ·OH and the cycle of Co(II)/Co(III) and Ni(II)/Ni(III). Additionally, Co/Ni-MOF displayed good stability and reusability in cycling experiments, ascribed to the enhancement of the porosity and pore hydrophobicity. Finally, based on MS/MS analysis at different reaction times, major degradation pathways for atrazine were proposed.

Design of a Graphene Nitrene Two-Dimensional Catalyst Heterostructure Providing a Well-Defined Site Accommodating One to Three Metals, with Application to CO2 Reduction Electrocatalysis for the Two-Metal Case.

Recently, the reduction of CO2 to fuels has been the subject of numerous studies, but the selectivity and activity remain inadequate. Progress has been made on single-site two-dimensional catalysts based on graphene coupled to a metal and nitrogen for the CO2 reduction reaction (CO2RR); however, the product is usually CO, and the metal-N environment remains ambiguous. We report a novel two-dimensional graphene nitrene heterostructure (grafiN6) providing well-defined active sites (N6) that can bind one to three metals for the CO2RR. We find that homobimetallic FeFe-grafiN6 could reduce CO2 to CH4 at -0.61 V and to CH3CH2OH at -0.68 V versus reversible hydrogen electrode, with high product selectivity. Moreover, the heteronuclear FeCu-grafiN6 system may be significantly less affected by hydrogen evolution reaction, while maintaining a low limiting potential (-0.68 V) for C1 and C2 mechanisms. Binding metals to one N6 site but not the other could promote efficient electron transport facilitating some reaction steps. This framework for single or multiple metal sites might also provide unique catalytic sites for other catalytic processes.

Synergistic Coupling of Anionic Ligands To Optimize the Electronic and Catalytic Properties of Metal–Organic Framework-Converted Oxygen-Evolving Catalysts

Multimetallic oxygen evolution reaction (OER) electrocatalysts have recently gained significant attention due to their excellent intrinsic activity resulting from the synergistic interplay between multiple metal sites. However, in these multimetallic catalyst systems, the function of their bridging anionic ligands (e.g., O2–, S2–, and P3–/PO43–) is rarely investigated, partially due to the lack of an ideal material model system. Herein, by combining a careful electrochemical conversion of metal–organic framework (MOF) precursors with low-temperature phosphorization processes, we designed a series of NiFe-based model catalysts as a proof-of-concept platform to identify the roles of different anionic ligands in tuning the redox and electronic properties of metal sites. Our experimental and theoretical results reveal that ligands having varying electron-withdrawing/-donating ability can modulate not only the electron density of Ni2+/Fe3+ centers but also the electron transfer efficiency from Ni2+ to neighbor...

Three to tango requires a site-specific substitution: heterotrimetallic molecular precursors for high-voltage rechargeable batteries.

Design of heterotrimetallic molecules, especially those containing at least two different metals with close atomic numbers, radii, and the same coordination number/environment is a challenging task. This quest is greatly facilitated by having a heterobimetallic parent molecule that features multiple metal sites with only some of those displaying substitutional flexibility. Recently, a unique heterobimetallic complex LiMn2(thd)5 (thd = 2,2,6,6-tetramethyl-3,5-heptanedionate) has been introduced as a single-source precursor for the preparation of a popular spinel cathode material, LiMn2O4. Theoretical calculations convincingly predict that in the above trinuclear molecule only one of the Mn sites is sufficiently flexible to be substituted with another 3d transition metal. Following those predictions, two heterotrimetallic complexes, LiMn2-x Co x (thd)5 (x = 1 (1a) and 0.5 (1b)), that represent full and partial substitution, respectively, of Co for Mn in the parent molecule, have been synthesized. X-ray structural elucidation clearly showed that only one transition metal position in the trinuclear molecule contains Co, while the other site remains fully occupied by Mn. A number of techniques have been employed for deciphering the structure and composition of heterotrimetallic compounds. Synchrotron resonant diffraction experiments unambiguously assigned 3d transition metal positions as well as provided a precise "site-specific Mn/Co elemental analysis" in a single crystal, even in an extremely difficult case of severely disordered structure formed by the superposition of two enantiomers. DART mass spectrometry and magnetic measurements clearly confirmed the presence of heterotrimetallic species LiMnCo(thd)5 rather than a statistical mixture of two heterobimetallic LiMn2(thd)5 and LiCo2(thd)5 molecules. Heterometallic precursors 1a and 1b were found to exhibit a clean decomposition yielding phase-pure LiMnCoO4 and LiMn1.5Co0.5O4 spinels, respectively, at the relatively low temperature of 400 °C. The latter oxide represents an important "5V spinel" cathode material for the lithium ion batteries. Transmission electron microscopy confirmed a homogeneous distribution of transition metals in quaternary oxides obtained by pyrolysis of single-source precursors.

Pore-Environment Engineering with Multiple Metal Sites in Rare-Earth Porphyrinic Metal-Organic Frameworks.

Multi-component metal-organic frameworks (MOFs) with precisely controlled pore environments are highly desired owing to their potential applications in gas adsorption, separation, cooperative catalysis, and biomimetics. A series of multi-component MOFs, namely PCN-900(RE), were constructed from a combination of tetratopic porphyrinic linkers, linear linkers, and rare-earth hexanuclear clusters (RE6 ) under the guidance of thermodynamics. These MOFs exhibit high surface areas (up to 2523 cm2 g-1 ) and unlimited tunability by modification of metal nodes and/or linker components. Post-synthetic exchange of linear linkers and metalation of two organic linkers were realized, allowing the incorporation of a wide range of functional moieties. Two different metal sites were sequentially placed on the linear linker and the tetratopic porphyrinic linker, respectively, giving rise to an ideal platform for heterogeneous catalysis.

Pore‐Environment Engineering with Multiple Metal Sites in Rare‐Earth Porphyrinic Metal–Organic Frameworks

AbstractMulti‐component metal–organic frameworks (MOFs) with precisely controlled pore environments are highly desired owing to their potential applications in gas adsorption, separation, cooperative catalysis, and biomimetics. A series of multi‐component MOFs, namely PCN‐900(RE), were constructed from a combination of tetratopic porphyrinic linkers, linear linkers, and rare‐earth hexanuclear clusters (RE6) under the guidance of thermodynamics. These MOFs exhibit high surface areas (up to 2523 cm2 g−1) and unlimited tunability by modification of metal nodes and/or linker components. Post‐synthetic exchange of linear linkers and metalation of two organic linkers were realized, allowing the incorporation of a wide range of functional moieties. Two different metal sites were sequentially placed on the linear linker and the tetratopic porphyrinic linker, respectively, giving rise to an ideal platform for heterogeneous catalysis.

Mechanistic Insights into Ring Cleavage and Contraction of Benzene over a Titanium Hydride Cluster.

Carbon-carbon bond cleavage of benzene by transition metals is of great fundamental interest and practical importance, as this transformation is involved in the production of fuels and other important chemicals in the industrial hydrocracking of naphtha on solid catalysts. Although this transformation is thought to rely on cooperation of multiple metal sites, molecular-level information on the reaction mechanism has remained scarce to date. Here, we report the DFT studies of the ring cleavage and contraction of benzene by a molecular trinuclear titanium hydride cluster. Our studies suggest that the reaction is initiated by benzene coordination, followed by H2 release, C6H6 hydrometalation, repeated C-C and C-H bond cleavage and formation to give a MeC5H4 unit, and insertion of a Ti atom into the MeC5H4 unit with release of H2 to give a metallacycle product. The C-C bond cleavage and ring contraction of toluene can also occur in a similar fashion, though some details are different due to the presence of the methyl substituent. Obviously, the facile release of H2 from the metal hydride cluster to provide electrons and to alter the charge population at the metal centers, in combination with the flexible metal-hydride connections and dynamic redox behavior of the trimetallic framework, has enabled this unusual transformation to occur. This work has not only provided unprecedented insights into the activation and transformation of benzene over a multimetallic framework but it may also offer help in the design of new molecular catalysts for the activation and transformation of inactive aromatics.

Towards characterization of photo-excited electron transfer and catalysis in natural and artificial systems using XFELs.

The ultra-bright femtosecond X-ray pulses provided by X-ray Free Electron Lasers (XFELs) open capabilities for studying the structure and dynamics of a wide variety of biological and inorganic systems beyond what is possible at synchrotron sources. Although the structure and chemistry at the catalytic sites have been studied intensively in both biological and inorganic systems, a full understanding of the atomic-scale chemistry requires new approaches beyond the steady state X-ray crystallography and X-ray spectroscopy at cryogenic temperatures. Following the dynamic changes in the geometric and electronic structure at ambient conditions, while overcoming X-ray damage to the redox active catalytic center, is key for deriving reaction mechanisms. Such studies become possible by using the intense and ultra-short femtosecond X-ray pulses from an XFEL, where sample is probed before it is damaged. We have developed methodology for simultaneously collecting X-ray diffraction data and X-ray emission spectra, using an energy dispersive spectrometer, at ambient conditions, and used this approach to study the room temperature structure and intermediate states of the photosynthetic water oxidizing metallo-protein, photosystem II. Moreover, we have also used this setup to simultaneously collect the X-ray emission spectra from multiple metals to follow the ultrafast dynamics of light-induced charge transfer between multiple metal sites. A Mn-Ti containing system was studied at an XFEL to demonstrate the efficacy and potential of this method.

La2@Cs(17 490)‐C76: A New Non‐IPR Dimetallic Metallofullerene Featuring Unexpectedly Weak Metal–Pentalene Interactions

Although all the pure-carbon fullerene isomers above C60 reported to date comply with the isolated pentagon rule (IPR), non-IPR structures, which are expected to have different properties from those of IPR species, are obtainable either by exohedral modification or by endohedral atom doping. This report describes the isolation and characterization of a new endohedral metallofullerene (EMF), La2@C76, which has a non-IPR fullerene cage. The X-ray crystallographic result for the La2@C76/[Ni(II)(OEP)] (OEP=octaethylporphyrin) cocrystal unambiguously elucidated the C(s)(17,490)-C76 cage structure, which contains two adjacent pentagon pairs. Surprisingly, multiple metal sites were distinguished from the X-ray data, which implies dynamic behavior for the two La(3+) cations inside the cage. This dynamic behavior was also corroborated by variable-temperature (139)La NMR spectroscopy. This phenomenon conflicts with the widely accepted idea that the metal cations in non-IPR EMFs invariably coordinate strongly with the negatively charged fused-pentagon carbons, thereby providing new insights into modern coordination chemistry. Furthermore, our electrochemical and computational studies reveal that La2@C(s)(17,490)-C76 has a larger HOMO-LUMO gap than other dilanthanum-EMFs with IPR cage structures, such as La2@D(3h)(5)-C78 and La2@I(h)(7)-C80, which implies that IPR is no longer a strict rule for EMFs.