Multiple-input Multiple-output Orthogonal Frequency Division Multiplexing Research Articles

OFDM-MIMO radar assisted dual-function radar communication system using index modulation

Dual-function radar communication (DFRC) system exploits a hardware platform to achieve both radar and communication functions. Compared to utilizing separate radar and communication systems, DFRC has better performance in spectrum utilization. In this paper, assisted by orthogonal frequency division multiplexing-multiple input multiple output (OFDM-MIMO) radar, we propose a DFRC system architecture combining generalized space shift keying (GSSK) modulation and subcarrier index modulation (SIM) techniques. In this scheme, linear frequency modulation (LFM) signal is explored as the transmission waveform of OFDM-MIMO radar to complete the radar function. Furthermore, the proposed scheme combines GSSK and SIM to carry the communication information to the antenna index and subcarrier index to complete the communication function. Based on this architecture, a novel low complexity frequency detection communication demodulation algorithm is proposed, and the achievable rate communication performance of the system is analyzed. Numerical and simulation results verify the feasibility and effectiveness of the proposed system.

Enhancing channel estimation accuracy in polar-coded MIMO–OFDM systems via CNN with 5G channel models

In this paper, a novel channel estimation technique for multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO–OFDM) systems in fifth generation (5G) networks is proposed, which leverages the power of convolutional neural networks (CNNs) along with the application of polar coding. By employing polar encoding at the transmitter and polar decoding at the receiver, the proposed system enhances error correction performance, reliability, and data transmission rate in 5G networks. A novel optimized CNN-based channel estimation technique, named CNN-CENet, has been integrated into the polar-coded MIMO–OFDM receiver. This integration aims to address the interference and noise challenges in 5G systems. The proposed channel estimation method utilizes multiple layers of CNN to accurately characterize the properties of the real channel by incorporating least squares (LS) estimations. Hence, the proposed CNN-CENet provides an accurate estimation of the channel coefficients, enabling efficient signal detection at the receiver. The MATLAB simulation has been conducted using deep learning and 5G toolboxes to obtain results for various channel parameters. These results are then compared with the LS and minimum mean square error (MMSE) methods for performance evaluation. The proposed model surpasses the performance of the LS and MMSE methods, achieving a significant 95.6% reduction in mean square error (MSE) compared to LS and a substantial 59.7% reduction compared to MMSE. Additionally, it delivers notable bit error rate (BER) reductions of 59.8% and 53.2% for LS and MMSE, respectively, in low mobility scenarios, and 57.4% and 48.5% reductions in high mobility scenarios. This improvement leads to enhanced reliability and overall system efficiency.

Superposed three-dimensional 64QAM constellation design for MIMO-OFDM visible light communication systems.

Multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) has been widely used to improve data rate in visible-light communication (VLC) systems. However, the high correlation of channels restricts the application of MIMO. A superposed constellation, combined with MIMO, can achieve considerable diversity gain even in highly correlated MIMO channels. In this study, what we believe to be novel superposed three-dimensional 64-quadrature amplitude modulation (3D-64QAM) constellation schemes are proposed for MIMO-OFDM VLC systems. First, a superposed 3D-64QAM constellation scheme using two transmitted light emitting diodes (LEDs) is proposed, where two independent signals with 3D-4QAM and 3D-16QAM modulation formats are superposed to form a 3D-64QAM signal at the receiver. Then, for what we believe is the first time, we expand the superposed constellation solution to three-LED application scenarios, wherein the 3D-64QAM constellation is superposed by three different 3D-4QAM constellations. Both schemes benefit from a higher minimum Euclidean distance of 3D-64QAM constellation, 1.67 times that of traditional two-dimensional (2D) 64QAM constellation. Meanwhile, the equal-power superposition design of transmitted signals reduces the nonlinearity of LEDs and power competition of photodiodes. Moreover, the three-LED scheme further improves the transmitted power without increasing the risk of nonlinear distortion. To improve spectral efficiency and reduce complexity, we also propose a 3D OFDM modulation scheme. The superposed 3D-64QAM schemes are first studied through theoretical analysis and computer simulation. Then, an experimental demonstration is established to investigate the system performance comprehensively. Experimental results prove that the superposed 3D-64QAM constellation schemes achieve a superior bit error rate (BER) performance than the traditional superposed 2D-64QAM constellation scheme. Compared with two-LED scheme, the three-LED scheme not only obtains a lower BER, but also improves the dynamic range of driving peak-to-peak voltage significantly.

PER Prediction in MIMO-OFDM Systems With Approximate Demodulation: A GMI-Based Method

In multiple-input-multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) systems, the symbols in a packet may undergo different signal-to-interference-plus-noise ratio (SINR) levels, making packet error rate (PER) prediction a challenging task. Effective SINR mapping (ESM) simplifies this problem by mapping the SINRs on different symbols to a single packet-level effective SINR. A novel ESM method, referred to as mean generalized mutual information mapping (MGMIM), is put forward in this paper. The proposed method transforms the SINR of each symbol to the generalized mutual information (GMI) and then derives an effective SINR from the mean GMI measure over different symbols. The derived effective SINR summarizes the effect of all the SINRs on the packet, which would produce the same PER performance under an additive white Gaussian noise (AWGN) channel. Compared to existing techniques, MGMIM does not require MCS-dependent tuning parameters but delivers competitive or even better PER prediction accuracy. More importantly, MGMIM allows reliable PER prediction when the receiver employs approximate demodulation, which boosts its applicability in practice. These features are demonstrated by comparative numerical simulations.

Theoretical Foundation and Design Guideline for Reservoir Computing-Based MIMO-OFDM Symbol Detection

In this paper, we derive a theoretical upper bound on the generalization error of reservoir computing (RC), a special category of recurrent neural networks (RNNs). The specific RC implementation considered in this paper is the echo state network (ESN), and an upper bound on its generalization error is derived via the empirical Rademacher complexity (ERC) approach. While recent work in deriving risk bounds for RC frameworks makes use of a non-standard ERC measure and a direct application of its definition, our work uses the standard ERC measure and tools allowing fair comparison with conventional RNNs. The derived result shows that the generalization error bound obtained for ESNs is tighter than the existing bound for vanilla RNNs, suggesting easier generalization for ESNs. With the ESN applied to symbol detection in MIMO-OFDM (Multiple Input Multiple Output-Orthogonal Frequency Division Multiplexing) systems, we show how the derived generalization error bound can guide underlying system design. Specifically, the derived bound together with the empirically characterized training loss is utilized to identify the optimum reservoir size in neurons for the ESN-based symbol detector. Finally, we corroborate our theoretical findings with results from simulations that employ 3GPP standards-compliant wireless channels, signifying the practical relevance of our work.

The Joint Channel Coding and Pre-Distortion Technique on the USRP-Based MIMO-OFDM System

Modern wireless communication systems use orthogonal frequency division multiplexing (OFDM), a multi-carrier modulation method that resists multipath channels and provides bandwidth efficiency. OFDM is generally used with a Multiple-Input Multiple-Output (MIMO) system to boost diversity gain and channel capacity. MIMO-OFDM has several advantages, but its high PAPR value is a drawback. A non-linear high-power amplifier (HPA) can distort signals with high PAPR values. This issue can be resolved by employing predistortion, which compensates for nonlinear HPA. In addition to PD, channel coding can be used to improve the quality of systems with high PAPR values by adding redundant bits to the bits to be sent. In this paper, we report the experimental evaluations of the joint channel coding and pre-distortion (PD) technique on a 2x2 MIMO OFDM system using USRP hardware. The experiments are conducted in two scenarios: line-of-sight (LOS) and nonline-of-sight (NLOS) scenarios. The channel coding used in this scenario is convolutional code with code rates of 1/2, 2/3, and 3/4. From the results of the experiment, it can be seen that the system that uses PD combined with the convolution code produces better performance in the LOS and NLOS scenarios compared to the system without PD. In the LOS scenario, the use of PD can improve the SNR value of code rates 1/2, 2/3, and 3/4 by approximately 58.74%, 75.97%, and 96.20%. In the NLOS scenario, the use of PD can improve the SNR value of code rates 1/2, 2/3, and 3/4 by about 60.71%, 73.59%, and 71.84%. The measurement of the LOS scenario gives a better SNR value than the NLOS scenario, with a maximum SNR value of 30.86 dB, while the maximum SNR value of the NLOS scenario is 30.23 dB. This happened because the LOS scenario suffered minimal multipath fading compared to the NLOS scenario

Bi‐directional LSTM based channel estimation in 5G massive MIMO OFDM systems over TDL‐C model with Rayleigh fading distribution

SummaryIn this work, a deep learning (DL)‐based massive multiple‐input multiple‐output (mMIMO) orthogonal frequency division multiplexing (OFDM) system is investigated over the tapped delay line type C (TDL‐C) model with a Rayleigh fading distribution at frequencies ranging from 0.5 to 100 GHz. The proposed bi‐directional long short‐term memory (Bi‐LSTM) channel state information (CSI) estimator uses online learning during training and offline learning during the practical implementation phase. The design of the estimator takes into account situations in which prior knowledge of channel statistics is limited and targets excellent performance, even with limited pilot symbols (PS). Three separate loss functions (mean square logarithmic error [MSLE], Huber, and Kullback–Leibler Distance [KLD]) are assessed in three classification layers. The symbol error rate (SER) and outage probability performance of the proposed estimator are evaluated using a number of optimization techniques, such as stochastic gradient descent (SGD), momentum, and the adaptive gradient (AdaGrad) algorithm. The Bi‐LSTM‐based CSI estimator is trained considering a specific number of PS. It can be readily seen that by incorporating a cyclic prefix (CP), the system becomes more resilient to channel impairments, resulting in a lower SER. Simulations show that the SGD optimization approach and Huber loss function‐trained Bi‐LSTM‐based CSI estimator have the lowest SER and very high estimation accuracy. By using deep neural networks (DNNs), the Bi‐LSTM method for CSI estimation achieves a superior channel capacity (in bps/Hz) at 10 dB than long short‐term memory (LSTM) and other conventional CSI estimators, such as minimum mean square error (MMSE) and least squares (LS). The simulation results validate the analytical results in the study.

MmWave 6D Radio Localization With a Snapshot Observation From a Single BS

Accurate and ubiquitous localization is crucial for a variety of applications such as logistics, navigation, intelligent transport, monitoring, control, and also for the benefit of communications. Exploiting millimeter-wave (mmWave) signals in 5G and Beyond 5G systems can provide accurate localization with limited infrastructure. We consider the single base station (BS) localization problem and extend it to 3D position and 3D orientation estimation of an unsynchronized multi-antenna user equipment (UE), using downlink multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) signals. Through a Fisher information analysis, we show that the problem is often identifiable, provided that there is at least one multipath component in addition to the line-of-sight (LoS), even if the position of corresponding incidence point (IP) is a priori unknown. Subsequently, we pose a maximum likelihood (ML) estimation problem, to jointly estimate the 3D position and 3D orientation of the UE as well as several nuisance parameters (the UE clock offset and the positions of IPs corresponding to the multipath). The ML problem is a high-dimensional nonconvex optimization problem over a product of Euclidean and non-Euclidean manifolds. To avoid complex exhaustive search procedures, we propose a geometric initial estimate of all parameters, which reduces the problem to a 1-dimensional search over a finite interval. Numerical results show the efficiency of the proposed ad-hoc estimation, whose gap to the Cramér-Rao bound (CRB) is tightened using the ML estimation.

Efficient Index Modulation-Based MIMO OFDM Data Transmission and Detection for V2V Highly Dispersive Channels

Vehicle-to-vehicle (V2V) communication networks are based on vehicles that wirelessly exchange data, traffic congestion, and safety warnings between them. The design of new V2V systems requires increasingly energetically and spectrally efficient systems. Conventional multiple-input–multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) systems have been used successfully for the last decade. However, MIMO-OFDM systems need to be improved to face future communication networks in high-mobility environments. This article proposes an efficient index modulation (IM)-based MIMO-OFDM system for V2V channels. The proposed transmission system is evaluated in high Doppler-spread channels. The results demonstrate that the proposed scheme reduces the required computational complexity in data detection and exhibits gains of up to 3 dB in bit error rate (BER) performance when compared to the conventional MIMO-OFDM system under the same conditions and parameters, along with achieving superior spectral efficiency. The results show the viability of implementing the proposed system in practical applications for high-transmission-rate V2V channels.

Hybrid Message Passing Channel Estimation Algorithm for Massive MIMO-OFDM Systems

In this letter, we propose the Bernoulli two-state Gaussian mixture (B-TSGM) probability model to characterize the angle-delay domain (ADD) channel of the massive multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) system. Based on the hybrid message passing (HMP) rule, we design the HMP-B-TSGM channel estimation algorithm under the structured turbo-compressed sensing (STCS) framework. Simulation results show that the considered model better captures the channel characteristics, and the proposed algorithm outperforms the state-of-the-art methods under a wide range of simulation settings while having the same complexity.

A Survey on Physical Layer Techniques and Challenges in Underwater Communication Systems

In the past decades, researchers/scientists have paid attention to the physical layer of underwater communications (UWCs) due to a variety of scientific, military, and civil tasks completed beneath water. This includes numerous activities critical for communication, such as survey and monitoring of oceans, rescue, and response to disasters under the sea. Till the end of the last decade, many review articles addressing the history and survey of UWC have been published which were mostly focused on underwater sensor networks (UWSN), routing protocols, and underwater optical communication (UWOC). This paper provides an overview of underwater acoustic (UWA) physical layer techniques including cyclic prefix orthogonal frequency division multiplexing (CP-OFDM), zero padding orthogonal frequency division multiplexing (ZP-OFDM), time-domain synchronization orthogonal frequency division multiplexing (TDS-OFDM), multiple input multiple output orthogonal frequency division multiplexing (MIMO-OFDM), generalized frequency division multiplexing (GFDM), unfiltered orthogonal frequency division multiplexing (UF-OFDM), continuous phase modulation orthogonal frequency division multiplexing (CPM-OFDM), filter bank multicarrier (FBMC) modulation, MIMO, spatial modulation technologies (SMTs), and orthogonal frequency division multiplexing index modulation (OFDM-IM). Additionally, this paper provides a comprehensive review of UWA channel modeling problems and challenges, such as transmission loss, propagation delay, signal-to-noise ratio (SNR) and distance, multipath effect, ambient noise effect, delay spread, Doppler effect modeling, Doppler shift estimation. Further, modern technologies of the physical layer of UWC have been discussed. This study also discusses the different modulation technology in terms of spectral efficiency, computational complexity, date rate, bit error rate (BER), and energy efficiency along with their merits and demerits.

Power Optimization of UOWC-MIMO-OFDM System Based on PSO-WF Algorithm

Under the constraint that the total transmission power is constant, when multiple input multiple output orthogonal frequency division multiplexing (MIMO-OFDM) technology is applied to the signal transmission design in the underwater optical wireless communication system (UOWC), the traditional water-filling algorithm (WF) uses mathematical derivation to solve the optimization problem, which requires multiple Lagrangian optimization solutions. In order to reduce the computational complexity and accelerate the convergence speed, a particle swarm optimization (PSO-WF) algorithm for water injection is proposed. It randomly selects particles in the target area, calculates the fitness, and gradually approximates the optimal solution to avoid negative power distribution. The simulation results show that, compared with the average power allocation scheme, the algorithm improves the system capacity and operation efficiency by about 80%; Compared with WF algorithm, it greatly reduces the complexity.

MaReSPS for energy efficient spectral precoding technique in large scale MIMO-OFDM

Spectral pre-coding is a capable method to restrain Out-Of-Band Emission (OOBE) and act in accordance with leaking parameters over neighboring frequency channels while masking unnecessary emissions. Nevertheless, spectral pre-coding might deform the real data vector that is articulated as the Error Vector Magnitude (EVM), which shows a harmful effect on the performance of Multiple-Input Multiple-Output-Orthogonal Frequency Division Multiplexing (MIMO-OFDM)-oriented schemes. In this research, a new Mapper Reducer for spectral pre-coded signal (MaReSPS) for energy-constrained signal receiver is proposed for energy efficient spectral precoding in the MIMO-OFDM system. This model involves Mapper Reducer (MR) framework for detecting the received signal, which renders an error rate, and graceful degradation is observed in the throughput under channel uncertainty. The proposed scheme alleviates the resultant Transmit EVM (TxEVM) observed at the receiver by capitalizing on the massive MIMO system, and as a result the throughput is improved. The comparison is done with respect to Block Error Rate (BLER), throughput, and Power Spectral Density (PSD) for proving the betterment of the proposed precoding model for MIMO-OFDM. In particular, the normalized throughput for conventional No OOBE Reduction (OOBER), Mask Compliant Spectral Pre-coder (MSP), Notching Spectral Pre-coder + Zero Forcing (NSP + ZF), P1/P2: CVX and P1/P2: Top- Alternating Direction Method of Multipliers (ADMM) models, as well as proposed MaReSPS model, is lower at a Signal to Noise Ratio (SNR) from 0 dB to 15 dB. With an increase in SNR, the normalized throughput increases and when SNR =40 dB, the normalized throughput values reach their peak values. However, compared to existing models, the proposed MaReSPS model showed high normalized throughput.

Compressive Beam and Channel Tracking With Reconfigurable Hybrid Beamforming in mmWave MIMO OFDM Systems

An efficient beam and channel acquisition and tracking scheme is developed under a reconfigurable hybrid beamforming (R-HBF) architecture for wideband millimeter wave (mmWave) multiple input multiple output (MIMO) systems. Under such an R-HBF, a hierarchical multi-resolution beam scanning and space-frequency compressive sensing method is proposed to achieve fast beam and channel acquisitions in mmWave MIMO orthogonal frequency division multiplexing (OFDM) systems. With the initial frequency-domain beam space channel estimates, Kalman-based algorithms are further developed to track the transmit and receive beamforming directions and the channel coefficients of the sparse propagation paths in mmWave mobile channels. Simulations show that the proposed method can greatly reduce the beam training time, and that the channel capacity evaluated with the estimated channels is only 2 dB inferior to the one with ideal channels. Moreover, the beam selection error rates are less than 10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">−3</sup> in typical urban mmWave mobile channels and traveling speeds even if the transmit power is only 10 dBm.

Estimation of bit error rate in 2×2 and 4×4 multi-input multi-output-orthogonal frequency division multiplexing systems

&lt;span lang="EN-US"&gt;Multiple-input, multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) systems with multiple input antennas and multiple output antennas in dynamic environments face the challenge of channel estimation. To overcome this challenge and to improve the performance and signal-to-noise ratio, in this paper we used the Kalman filter for the correct estimation of the signal in dynamic environments. To obtain the original signal at the receiver end bit error rate factor plays a major role. If the signal to noise ratio is high and the bit error rate is low then signal strength is high, the signal received at the receiver end is almost similar to the &lt;/span&gt;&lt;em&gt;&lt;span lang="EN-US"&gt;i&lt;sup&gt;th&lt;/sup&gt;&lt;/span&gt;&lt;/em&gt;&lt;span lang="EN-US"&gt; transmitted signal. The dynamic tracking characteristic of Kalman filter is used to establish a dynamic space-time codeword and a collection of orthogonal pilot sequences to prevent interference among transmissions in this paper. Using the simulation, the Kalman filter method can be compared to the other channel estimation method presented in this paper that can track time-varying channels rapidly.&lt;/span&gt;

Data Aided Channel Estimation for MIMO-OFDM Wireless Systems Using Reliable Carriers

Wireless channel estimation is one of the challenging problems in Multiple Input Multiple Output Orthogonal Frequency Division Multiplexing (MIMO-OFDM) wireless systems. The MIMO-OFDM exploits the spatial resources and increases the reliability and capacity of wireless systems. However, the performance of these systems depends on accurate channel estimation since the receivers require perfect Channel State Information (CSI) for coherent signal detection. Thus, wireless channel estimation is a necessary component of OFDM systems. In this article, we have proposed an algorithm for MIMO-OFDM systems that combines pilot symbols with reliable data symbols for channel estimation. The reliable data symbols serve as virtual pilots and enhance the spectral efficiency. The proposed Data Aided Channel Estimation (DACE) algorithm eliminates the requirement of any additional resources such as excessive number of training symbols to attain the desired performance. Also, it outperforms the traditional Least Square (LS) and Linear Minimum Mean Square Error (LMMSE) methods for channel estimation in terms of Mean Square Error (MSE) and Bit Error Rate (BER) performance of the system.

Key Generation Technique Based on Channel Characteristics for MIMO-OFDM Wireless Communication Systems

Dynamic secret key generation from wireless channel characteristics is a promising technique for physical layer security. One of the important issues in this field is extending the secret key’s length while preserving its uniformity and randomness. This paper proposes a key generation method based on time-varying and the reciprocity of wireless channels for Multiple-Input Multiple-Output Orthogonal Frequency Division Multiplexing (MIMO-OFDM) wireless communication systems. In the proposed technique, the complex impulse response (CIR) of the estimated channel state information (CSI) is extracted, and a quantization algorithm is designed to convert the maximum peaks of the CIR into secret key bits. The effectiveness of the proposed key generation technique is assessed in terms of the randomness of the produced key bits with different key lengths by using a statistical test suite of the National Institute of Standards and Technology (NIST). The proposed technique is employed in the MIMO-OFDM systems with different modulation schemes through Additive White Gaussian Noise (AWGN) and Rayleigh channels. The simulation results show that the secret keys with various key lengths generated from the proposed technique for the MIMO-OFDM systems guarantee randomness. Moreover, the proposed CSI-based key generation technique provides better effectiveness in terms of security when compared to some existing techniques.

Estimation of Time-Varying Channels in Virtual Angular Domain for Massive MIMO Systems

This paper is concerned with the problem of channel estimation in virtual angular domain in massive MIMO orthogonal frequency division multiplexing (OFDM) systems, in the presence of time varying channels. The proposed channel estimator is based on dichotomous coordinate decent joint sparse recovery (DCD-JSR) algorithm, which was well suited for massive MIMO systems with channels static over several OFDM symbols, but it is not accurate for time-varying channels. The estimator proposed in this paper exploits the basis expansion model (BEM) for approximation of the time-variation of the channel and the sparsity of the channel in the virtual angular domain with a common support over OFDM subcarriers and OFDM symbols for joint estimation of the BEM expansion coefficients. It is shown that, when using the Legendre polynomials as the BEM and depending on the normalized Doppler frequency, only a small number of expansion coefficients is required to provide accurate channel estimation.

New Preamble Sequence for WiMAX System with Improved Synchronization Accuracy

Worldwide Interoperability for Microwave Access (WiMAX) trusts Multiple Input Multiple Output-Orthogonal Frequency Division Multiplexing (MIMO-OFDM) combination for the deployment of physical layer functions and for connecting the medium access control to the wireless media. Even though Orthogonal Frequency Division Multiplexing (OFDM) facilitates reliable digital broadband transmission in the fading wireless channels, the presence of synchronization errors in the form of Carrier Frequency Offset (CFO) and Time Offset (TO) adversely affect the performance of OFDM based physical layers. The objective of this work is to improve the accuracy of the frequency and the time offset estimation in the WiMAX physical layer. A method to enhance the synchronization accuracy by fine-tuning the merit factor of the preamble sequence is suggested in this paper. Also, a new preamble with improved synchronization accuracy is proposed for the WiMAX system. The performance of the proposed preamble is evaluated in a Rayleigh fading channel and the results of simulations show that the Mean Square Error (MSE) in offset estimation is significantly reduced and it outperforms the standard WiMAX preamble.

Efficient transmission of FECG signal using MIMO – OFDM

The extraction of Fetal Electrocardiogram (FECG) during labor or prenatal phases of pregnancy holds significant importance for early prediction of heart abnormalities. The accuracy of the extracted FECG is crucial for effective diagnosis, but the presence of external noises, particularly from the Maternal ECG (MECG), poses a major challenge in obtaining precise information. To address this issue in biomedical data processing, the study employs Finite Impulse Response (FIR) filters using an array multiplier. One notable challenge encountered in this process is the interference caused by external noises, leading to higher delay and power dissipation. In response, a modified High-Performance Multiplier (HPM) based modified booth multiplier is thoroughly reviewed and validated. This modification aims to enhance overall performance and enable high-speed operations in filtering the FECG signals. The effectiveness of these modified multipliers is assessed using ECG signal information collected from the MIT-BIH Arrhythmia Database, comprising 120 samples. In addition to noise filtering, the study explores the validation of Multiple-Input Multiple-Output Orthogonal Frequency Division Multiplexing (MIMO-OFDM) transceivers. These transceivers play a crucial role in ensuring the effective transmission of the extracted FECG signals. The research reveals a significant reduction, up to 80.4%, in both area and power dissipation during simulations conducted in Xilinx ISE 9.1 and Cadence Virtuoso. This achievement highlights the potential for improved efficiency and reliability in the processing and transmission of FECG signals, paving the way for advancements in early detection of fetal heart abnormalities.