Multifunctional Products Research Articles

Anti-obesity and other health benefits of bioprocessed black rice bran in combination with green tea extract in 3T3-L1 preadipocyte cells and in mice on a high-fat diet.

Black rice bran, a waste product from the commercial milling of black rice that removes the bran and germ leaving the starchy endosperm, contains bioactive anthocyanin, phenolic, and phytosteroid compounds that may have health benefits. This study determined the effect of a polysaccharide-rich bioprocessed (fermented) black rice bran and a green tea extract individually and in combination on weight loss in orally fed mice on a high-fat diet and on concurrent changes in blood glucose and insulin as well as in cholesterol, triglyceride, and high-density and low-density lipoproteins (HDL and LDL). At the end of the eight-week feeding study, the combination diet resulted in a 67% lower weight gain than mice on a high-fat diet alone, a greater effect than that of bioprocessed black rice bran or green tea extract individually. The weight loss caused by the combination diet seems to be the result of decreased dietary efficiency. The observed trends in the glucose and insulin data suggest that the combined diet also has anti-diabetic properties, and the corresponding trends in the levels of the serum lipoproteins suggest that the combined diet might also protect against heart disease. Effects on the content, structure, and function of white adipose and liver tissues and on obesity-related biomarkers support the trends in the weight loss data. Based on the observed beneficial effects in 3T3-L1 pre-adipocyte cells and mice, we suggest the need to investigate if the new multifunctional combination food product can also protect against obesity and chronic diseases in humans. Mechanistic aspects that govern the anti-obesity effects and suggestions for future research are discussed.

Tandem, Catalyst‐Free C‐C Synthesis of Nitriles from Aldehydes and Methyl Cyanoacetate with Sodium Hypophosphite

Saturated carbon chain elongation is a common refrain in numerous synthetic pathways. While the formation of C‐C single bonds is of primary importance in organic synthesis, simultaneous introduction of functional groups such as nitrile or ester can reasonably increase its practical utility to prepare multifunctional products. Knoevenagel reaction is one of the powerful tools to create carbon backbones of organic molecules; however, it requires subsequent reduction and/or decarboxylation to achieve a product with a saturated carbon chain. Herein we report a convenient one‐step protocol for the reductive condensation between methyl cyanoacetate and aldehydes in the presence of stable, ecologically benign, cheap and available in bulk amounts sodium hypophosphite as a reductant. A description of both the reaction capabilities and limitations is given in this paper.

A Review of Polyurethane Foams for Multi-Functional and High-Performance Applications.

Polyurethane (PU) foams are cellular polymeric materials that have attracted much attention across various industries because of their versatile properties and potential for multifunctional applications. PU foams are involved in many innovations, especially in multi-functional and high-performance applications. Special attention is given to developing tailored PU foams for specific application needs. These foams have various applications including flame retardancy, sound absorption, radar absorption, EMI shielding, shape memory, and biomedical applications. The increasing demand for materials that can perform multiple functions while maintaining or enhancing their core properties has made PU foams a focal point of interest for engineers and researchers. This paper examines the challenges faced by the PU foam industry, particularly in developing multifunctional products, as well as the strategies for improving sustainability, such as producing PU foams from renewable resources and recycling existing materials.

Nickel-Catalyzed Asymmetric (3 + 2) Annulations of Propargylic Carbonates and Vinylogous Donors via an Alkenylation Pathway.

The transition-metal-catalyzed alkenylation strategy of propargylic alcohol derivatives provides an efficient protocol to access multifunctional products in a double-nucleophilic attack pattern. While limited relevant asymmetric examples have been reported via palladium catalysis, here we first demonstrate that a nonprecious Ni(0)-based chiral complex can efficiently promote the tandem substitution process between propargylic carbonates and N-trifluoroethyl ketimines via consecutive aza-vinylogous activations, finally accomplishing a (3 + 2) annulation reaction to afford products embedding a 4-methylene-3,4-dihydro-2H-pyrrole framework with high regio-, diastereo-, and enantiocontrol. Their assemblies with a few all-carbon-based vinylogous precursors are also successful, and enantioenriched adducts containing a 3-methylenecyclopentene scaffold are furnished effectively. The substitution patterns for both types of substrates are substantial, and an array of synthetic elaborations is conducted to deliver more versatile architectures with high application potential. In addition, density functional theory calculations and control experiments have been conducted to rationalize the catalytic pathways and regio- and enantioselectivity control.

Emulsion Structural Remodeling in Milk and Its Gelling Products: A Review.

The fat covered by fat globule membrane is scattered in a water phase rich in lactose and milky protein, forming the original emulsion structure of milk. In order to develop low-fat milk products with good performance or dairy products with nutritional reinforcement, the original emulsion structure of milk can be restructured. According to the type of lipid and emulsion structure in milk, the remolded emulsion structure can be divided into three types: restructured single emulsion structure, mixed emulsion structure, and double emulsion structure. The restructured single emulsion structure refers to the introduction of another kind of lipid to skim milk, and the mixed emulsion structure refers to adding another type of oil or oil-in-water (O/W) emulsion to milk containing certain levels of milk fat, whose final emulsion structure is still O/W emulsion. In contrast, the double emulsion structure of milk is a more complicated structural remodeling method, which is usually performed by introducing W/O emulsion into skim milk (W2) to obtain milk containing (water-in-oil-in-water) W1/O/W2 emulsion structure in order to encapsulate more diverse nutrients. Causal statistical analysis was used in this review, based on previous studies on remodeling the emulsion structures in milk and its gelling products. In addition, some common processing technologies (including heat treatment, high-pressure treatment, homogenization, ultrasonic treatment, micro-fluidization, freezing and membrane emulsification) may also have a certain impact on the microstructure and properties of milk and its gelling products with four different emulsion structures. These processing technologies can change the size of the dispersed phase of milk, the composition and structure of the interfacial layer, and the composition and morphology of the aqueous phase substance, so as to regulate the shelf-life, stability, and sensory properties of the final milk products. This research on the restructuring of the emulsion structure of milk is not only a cutting-edge topic in the field of food science, but also a powerful driving force in promoting the transformation and upgrading of the dairy industry to achieve high-quality and multi-functional dairy products, in order to meet the diversified needs of consumers for health and taste.

New Phytol Derivatives with Increased Cosmeceutical Potential.

Natural compounds are widely incorporated into cosmetic products for many purposes. Diterpenes often function as fragrances, enhancing the sensory experience of these formulations. However, current trends in cosmetic science aim to develop multifunctional products, where compounds traditionally used for texture or fragrance also possess biological activities that contribute to the product's efficacy. In this context, this study focuses on synthesizing derivatives of phytol-a compound already presents in cosmetic formulations-to enhance its anti-aging properties. The derivatives were synthesized through esterification with substituted benzoic and cinnamic acids, known for their antioxidant and enzyme inhibition properties. Reaction yields ranged from 91.0% to 5.2%, depending on the substituents in acid derivatives. The structures of the synthesized compounds were confirmed through NMR and MS techniques. Both the natural and newly synthesized derivatives were evaluated for their cosmeceutical potential using antioxidant assays and inhibition assays for tyrosinase, elastase, collagenase, and hyaluronidase. This work presents the first report of the synthesis and cosmetic evaluation of several of these derivatives. Comparing with phytol (1), which presented an IC50 of 77.47 µM, four of the derivatives presented improved tyrosinase inhibitory activity, with phytyl 4-methoxybenzoate being the most active (IC50 = 27.9 µM), followed by phytyl benzoate with an IC50 of 34.73 µM. Substitutions at other positions on the aromatic ring were less effective. Molecular docking studies confirmed that the modifications potentiated a stronger interaction between the synthesized compounds and tyrosinase.

Yarn-Based Degradable Janus PPDO Fabric for Multifunctional Applications.

The growing high standard of people's wear has put forward requirements for fabrics, and multifunctional fabrics have been developed precisely in response to the requirements of the times. However, the incineration of waste fabrics produces a large amount of pollutants, resulting in a massive waste of resources and environmental pollution. Herein, the degradable nanofiber yarns (NYs) with self-cleaning properties were fabricated by in situ growth of SiO2 nanoparticles on the surface of the electrospun poly(p-dioxanone) (PPDO) NYs using the Stöber method. Then, the PPDO NYs were blended with carbon fibers and the PPDO/SiO2 NYs with themselves to form the Janus PPDO fabrics, respectively. The Janus PPDO fabric offered asymmetric wettability and dual personal thermal management properties. The PPDO/C side of the Janus PPDO fabric provided 65.8 °C at 1.5 V or 58.5 °C under one sunlight intensity for radiative heating. The PPDO/SiO2 side exhibited high solar reflectivity (81.8%) and mid-infrared (MIR) emissivity (99.1%), which reduced the skin temperature by 4.6 °C, resulting in radiative cooling. Moreover, the Janus PPDO fabrics display an excellent electromagnetic interference (EMI) shielding performance (53.3 dB). Therefore, yarn-based degradable Janus fabric has a promising future in multifunctional wearable products.

Biosynthesis and potential application of sustainable lignocellulolytic enzymes cocktail for the development of eco-friendly multifunctional cellulosic products

Biosynthesis and potential application of sustainable lignocellulolytic enzymes cocktail for the development of eco-friendly multifunctional cellulosic products

Preparation and Properties of Thermoregulated Seaweed Fibers Based on Magnetic Paraffin wax@calcium Carbonate Microcapsules

In order to enhance the application of thermoregulated materials, magnetic phase change microcapsules were prepared using a self-assembly method. Paraffin wax was chosen for its fine thermoregulation properties as the core material, while Fe3O4 nanoparticles doped in calcium carbonate served as the hybrid shell material. The microcapsules were then blended with sodium alginate and processed into seaweed fibers through wet spinning. The microstructure, thermal, and magnetic properties of the microcapsules were analyzed using scanning electron microscopy, energy dispersive X-ray spectroscopy, a laser particle size analyzer, an X-ray diffractometer, a differential scanning calorimeter, a thermogravimetric analyzer, and a vibrating sample magnetometer. The thermoregulation of the fibers was evaluated using a thermal infrared imager. The results indicated that the microcapsules had a uniform size distribution and good thermal properties. When the mass fraction of Fe3O4 nanoparticles was 8%, the microcapsules exhibited a saturation magnetization of 2.44 emu/g and an enthalpy value of 94.25 J/g, indicating effective phase change and magnetic properties. Furthermore, the thermoregulated seaweed fibers showed a high enthalpy value of 19.8 J/g with fine shape, offering potential for developing multifunctional fiber products.

Changes in Digestive Health, Satiety and Overall Well-Being after 14 Days of a Multi-Functional GI Primer Supplement.

A recent review proposed a role for multi-functional food or supplement products in priming the gut to support both digestive and systemic health. Accordingly, we designed and eva-luated the effect of a multi-functional gastrointestinal (GI) primer supplement on participant-reported measures for digestive health, quality-of-life (e.g., energy/vitality and general health), and reasons for satiation (e.g., attitudes towards food and eating). In this single-arm clinical trial, 68 participants with mild digestive symptoms consumed the GI primer supplement daily for 14 days. Digestive symptoms were evaluated daily from baseline (Day 0) through Day 14. At baseline and Day 14, participants reported their stool consistency, reasons for satiation, and quality-of-life measures using validated questionnaires. At Day 14, participants reported significant improvements in all (13/13) digestive symptom parameters (p-values < 0.05) and an increase in % of stools with normal consistencies. There were significant improvements (p-values < 0.05) in energy/vitality and general health, and in specific attitudes towards food and eating (e.g., physical satisfaction, planned amount, decreased eating priority, decreased food appeal, and self-consciousness). Results suggest the GI primer supplement promotes digestive health, improves quality of life, and impacts attitudes towards food/eating. This study provides preliminary support for the gut priming hypothesis through which multi-functional digestive products may improve GI health.

Green synthesis of multifunctional bamboo-based nonwoven fabrics for medical treatment

Medical nonwovens fabrics are pivotal materials in modern healthcare systems, and find extensively application in surgical gowns, masks, nursing pads, and surgical instrument packaging. As healthcare requirements evolve and medical technology advances, the demand for functional nonwoven medical devices is continuously increasing. In addition, numerous environmental challenges and the need to transition to a sustainable society have increased the popularity of studies on environmentally friendly multifunctional nonwoven materials prepared from biomass fibers. Therefore, in this study, ecofriendly bamboo fibers were used to fabricate multifunctional medical nonwoven materials with superhydrophobic, antibacterial, flame-retardant, and biocompatible properties. Specifically, ZIF-67 was grown in situ on natural bamboo cellulose fibers (BCFs) extracted from natural bamboo and coated with polydimethylsiloxane to construct an environmentally friendly and versatile nonwoven fabric. The treated nonwoven fabric exhibited superhydrophobicity with contact angle of 163° and possess excellent self-cleaning properties. The antibacterial activity of the samples was investigated by the plate-counting method; the results showed that the untreated BCFs did not exhibit antibacterial activity, whereas the treated bamboo nonwoven fabrics demonstrated significant antibacterial activity (p < 0.001), with an antibacterial rate of >99 % against Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, Bacillus subtilis, and Candida albicans. In addition, when the samples were exposed to different temperatures (−4 and 50 °C) and humidities (0 % and 95 %), they demonstrated an antibacterial activity of >99 % against E. coli (F5,10 = 0.602; p = 0.670) and S. aureus (F4,10 = 0.289; p = 0.879). The heat release rate and smoke production rate of the nonwoven fabric decreased by 54.64 % and 93.18 %, respectively, compared to those of the BCFs, indicating excellent flame retardancy. The nonwoven fabric also exhibited satisfactory biocompatibility and breathability, ensuring user comfortability. This research not only has significant implications for producing low-cost, environmentally friendly, sustainable, and multifunctional medical products and openi up new pathways for the diversified utilization of bamboo, thereby expanding its applicability.

When “the more the better”? Mindfulness enhances the effect of the number of displayed product features in short video ADs on purchase intention

In the age of information explosion, consumers may no longer want to be overwhelmed with more information. But marketers are forced to display multiple features of a product in advertisements to fully demonstrate its competitive advantage, especially for a multifunctional product. Based on this, the authors explore when more could be an effective marketing strategy. The results of five studies demonstrated that the more features of multifunctional products displayed in video ads, the lower the processing fluency of consumers when watching the ads, thus reducing their positive emotions, and finally reducing their purchase intention, supporting the negative effect of more features on consumers in the context of marketing and revealed its cognitive and emotional mechanism. More important, we introduce mindfulness, an effective marketing strategy that alleviates the negative effect of too many product features on consumers, into the field of advertising marketing to address this issue. A high level of mindfulness, whether measured by trait scales or manipulated by experimental priming, weakens the negative effects of the number of displayed features. Specifically, when the level of mindfulness is high, the negative effect of displaying more product features on purchase intention is weak. When the level of mindfulness is low, the number of displaying more features has a strong negative impact on purchase intention.

Asymmetric Synthesis of Functionalized α-Amino Acid Derivatives via the γ-Pyrone Carbaldimine-Based Organocatalytic Mannich Reaction.

A powerful synthetic strategy for the asymmetric synthesis of enantiomerically enriched γ-functionalized α-amino acid derivatives based on the highly stereoselective proline-catalyzed Mannich-type reaction of pre-prepared or in situ-generated γ-pyrone-derived aldimines with carbonyl compounds and subsequent transformations of multifunctional reaction products has been developed. A significant positive nonlinear effect was detected for the key organocatalytic reaction. The developed strategy was applied for facile gram-scale preparation of (S)-γ-oxonorvaline, used for site-specific modification of proteins, and both enantiomers of amycolatolide A recently isolated from the lichen-derived actinomycete Amycolatopsis sp. YIM 130923.

Characterization of a new Teflon chamber and on-line analysis of isomeric multifunctional photooxidation products

Abstract. The photooxidation of volatile organic compounds (VOCs) in the troposphere has important implications for air quality, weather, and climate. A deeper understanding of the underlying mechanisms can be achieved by studying these reactions under controlled conditions and analysing the emerging photooxidation products. This requires dedicated laboratory infrastructure as well as sensitive and selective analytical techniques. Here, we constructed a new 300 L indoor Teflon atmospheric simulation chamber as part of the Bayreuth ATmospheric simulation CHambers (BATCH) infrastructure. The chamber was irradiated by a bandpass-filtered solar simulator that enabled experiments with realistic photon fluxes and OH radical concentrations. It was coupled to a proton-transfer-reaction time-of-flight mass spectrometer (PTR-ToF-MS) and a solid-phase microextraction–gas chromatography–mass spectrometry (SPME-GC-MS) system for the on-line analysis of the precursor VOC and its oxidation products in the gas phase. As part of the SPME-GC-MS method, multifunctional oxygenated compounds (carbonyls, alcohols, carboxylic acids) were derivatized with O-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine (PFBHA) and N-trimethylsilyl-N-methyltrifluoroacetamide (MSTFA). We designed a permeation source for the on-line addition of internal standards to improve method reproducibility. The joint setup was tested and validated by studying the OH-radical-induced photooxidation of toluene, one of the most abundant aromatic hydrocarbons in the atmosphere. For chamber characterization, we first derived the photolysis rates for several typical toluene products in the irradiated BATCH Teflon chamber (1.77 × 10−8–3.02 × 10−4 s−1). Additionally, wall loss rates were determined empirically (4.54 × 10−6–8.53 × 10−5 s−1) and then parameterized according to fundamental molecular properties. For the cresols, we compiled a weighted calibration factor for the PTR-ToF-MS, taking into account isomer-specific sensitivities as well as the relative distribution as determined by the SPME-GC-MS. The weighted calibration improved the instrumental agreement to 14 %, whereas the PTR-ToF-MS overestimated the sum of the isomers by 31 % compared to the SPME-GC-MS concentrations when using the averaged calibration factor. Thus, the combined data set offered insight into both temporal trends and the isomeric composition. Finally, we conducted six toluene photooxidation experiments to evaluate the ring-retaining first-generation products. Based on the loss-corrected concentrations, we derived formation yields for o-cresol (8.0 ± 1.8 %), m-cresol (0.4 ± 0.1 %), p-cresol (2.4 ± 0.6 %), benzyl alcohol (0.5 ± 0.1 %), and benzaldehyde (4.6 ± 1.7 %) under NOx-free conditions at T = 298 ± 1 K. These yields are consistent with previous studies and therefore serve as proof of concept for our applied methods.

Fully upgrade bamboo biomass into three multifunctional products through biphasic γ-valerolactone and aqueous phosphoric acid pretreatment

In this manuscript, three components of lignocellulosic biomass were obtained by deconstructing bamboo with γ-valerolactone-H2O biphasic system, and the delignification rate of 80.92 % was achieved at 120 °C for 90 min. Lignin nanospheres with diameters ranging from 75 nm to 2 um could be customized by varying the self-assembly rate. Furthermore, the lignin nanospheres-poly(vinyl alcohol) film was prepared by cross-linking lignin nanospheres and poly(vinyl alcohol), which can obtain 90 % ultraviolet absorption capacity, while the light transmittance in non-ultraviolet band was almost unchanged. At the same time, due to the strong hydrogen formation between lignin nanospheres and poly(vinyl alcohol) bond network, the tensile properties of the composite film were also improved by 30 %. Besides, the high specific surface area of biomass-derived porous biochar (2056 m2/g) can be obtained after carbonization of solid residues at 850 °C for 2 h, which was almost 8 times the specific surface area of the direct biomass carbonization due to the removal of lignin and hemicellulose. biomass-derived porous biochar can be used as an adsorbent, with a CO2 capture capacity of 4.5 mmol g−1 at normal temperature (25 °C, 1 bar). The filtrate after the reaction contained a large amount of hemicellulose oligomers, which can be reacted with dichloromethane at 170 °C for 1 h to obtain the furfural yield of 74 %. In summary, the proposed biorefinery scheme achieves a full-component upgrade of lignocellulose and can be further applied in various downstream fields.

Fire safety of building integrated photovoltaic systems—State of the art

The main long-term goal of international communities is to achieve sustainable development. This issue is currently highly topical in most European Union (EU) countries due to the ongoing energy crisis. Building Integrated Photovoltaics (BIPV), which can be integrated into the building surface (roof or facade), thereby replacing conventional building materials, contributes significantly to achieving zero net energy buildings. However, fire safety is important when using BIPV as a structural system in buildings, and it is essential that the application of BIPV as building facades and roofs does not adversely affect the safety of the buildings, their occupants, or the responding firefighters. As multifunctional products, BIPV modules must meet fire safety requirements in the field of electrical engineering as well as in the construction industry. In terms of building regulations, the fire safety requirements of the BIPV must comply with national building regulations. Within this article, aspects and fire hazards associated with BIPV system installations will be defined, including proposals for installation and material requirements that can help meet fire safety.

Multifunctional agricultural inputs based on biochar impregnated with algae residues extracts: Promoting effect on tomato growth

Macroalgae have been increasingly valorized in many applications due to their diverse biochemical composition and sustainable resource utilization. However, their residues are still undervalued even though they remain unexhausted and retain a broad spectrum of nutrients and molecules likely to be used in crop production as plant biostimulants and as soil amendment. In this study, macroalgae residues were recovered after an industrial extraction of agar and valorized through two pathways: 1) extraction of the remaining bioactive compounds using thermal, mechanical, physical, and biological processes, and 2) production of biochar using pyrolysis. After that, both outputs; extracts and biochar were combined to produce a multifunctional product “extract-impregnated biochar”, where the two components with different functionalities were co-integrated in the same formulation. Then, their effects were tested on tomato growth and nutrients content in the soil. Results indicated that the extracts obtained through enzymatic pyrolysis contained the highest protein content on (10.6 g/L), whereas the acidic attack provided the highest phosphorus content (1.24 g/L). The shoot and root biomass of tomato increased by 54 % and 100 %, respectively, with untreated biochar whereas it rose by 123–146 % and 200–450 % with extract-impregnated biochar. In addition, a slight improvement in soil total N and P was observed with both untreated and treated biochar applications when compared to the control. In general, the acidic and enzymatic pretreatments of algae residues appear to yield favorable results.

Anthocyanins from pomegranate peel (Punica granatum), chili pepper fruit (Capsicum annuum), and bougainvillea flowers (Bougainvillea spectabilis) with multiple biofunctions: Antibacterial, antioxidant, and anticancer

BackgroundNatural colorants, including natural pigments, e.g., anthocyanins, carotenoids, and chlorophylls, in novel and attractive food matrixes have become a popular trend. They impart favorite colors to food products and provide significant therapeutic effects. This study is aimed at extracting and identifying some natural pigments from different plant sources and evaluating their ability as antibacterial, antioxidant, and anticancer activities. MethodsThe anthocyanin-rich extract (ARE) is derived from three natural plant sources: pomegranate peel (Punica granatum), chili pepper fruit (Capsicum annuum), and Bougainvillea flowers. Bougainvillea spectabilis are analyzed for biochemical composition, as well as antioxidant, antibacterial, and anticancer activity, HPLC, DPPH, FRAP, disc diffusion assay, MIC, MTT, VEGFR‐2, and caspase-9 assays. ResultsAll three extracts had varying total phenolic contents, ranging from 14 to 466 mg GAE/g extract, where Punica granatum was the highest (466 mg GAE/g extract), followed by Bougainvillea spectabilis (180 mg GAE/g extract), and then Capsicum annuum (14 mg GAE/g extract). The antioxidant activity rose steadily with raising concentration. The ARE of pomegranate peels recorded highest value, followed by Bougainvillea flowers and chili pepper fruit. The MTT assay revealed an inhibitory action of the tested extracts on the proliferation of HCT-116, MCF-7, and HepG2 in a concentration-based manner. Gene expression of caspase-9 transcripts was considerably multiplied by the application of ARE of pomegranate peels. All the tested extracts inhibited VEGFR-2, and the inhibition (%) expanded gradually with increasing concentrations, achieving the highest value (80 %) at 10 μg/mL. The ARE of pomegranate peels scored highest antibacterial activity, followed by ARE of chili pepper fruit and Bougainvillea flowers. The inhibition zone diameter escalated gradually with rising concentrations of the tested samples. ConclusionThe AREs of the three studied plant sources can be used as multifunctional products with antioxidant, anticancer, and antibacterial activities that are natural, safe, and cheap.

Observation-constrained kinetic modeling of isoprene SOA formation in the atmosphere

Abstract. Isoprene has the largest global non-methane hydrocarbon emission, and the oxidation of isoprene plays a crucial role in the formation of secondary organic aerosol (SOA). Two primary processes are known to contribute to SOA formation from isoprene oxidation: (1) the reactive uptake of isoprene-derived epoxides on acidic or aqueous particle surfaces and (2) the absorptive gas–particle partitioning of low-volatility oxidation products. In this study, we developed a new multiphase condensed isoprene oxidation mechanism that includes these processes with key molecular intermediates and products. The new mechanism was applied to simulate isoprene gas-phase oxidation products and SOA formation from previously published chamber experiments under a variety of conditions and atmospheric observations during the Southern Oxidant and Aerosol Studies (SOAS) field campaign. Our results show that SOA formation from most of the chamber experiments is reasonably reproduced using our mechanism, except when the concentration ratios of initial nitric oxide to isoprene exceed ∼ 2, the formed SOA is significantly underpredicted. The SOAS simulations also reasonably agree with the measurements regarding the diurnal pattern and concentrations of different product categories, while the total isoprene SOA remains underestimated. The molecular compositions of the modeled SOA indicate that multifunctional low-volatility products contribute to isoprene SOA more significantly than previously thought, with a median mass contribution of ∼ 57 % to the total modeled isoprene SOA. However, this contribution is intricately intertwined with IEPOX-derived SOA (IEPOX: isoprene-derived epoxydiols), posing challenges for their differentiation using bulk aerosol composition analysis (e.g., the aerosol mass spectrometer with positive matrix factorization). Furthermore, the SOA from these pathways may vary greatly, mainly dependent on the volatility estimation and treatment of particle-phase processes (i.e., photolysis and hydrolysis). Our findings emphasize that the various pathways to produce these low-volatility species should be considered in models to more accurately predict isoprene SOA formation. The new condensed isoprene chemical mechanism can be further incorporated into regional-scale air quality models, such as the Community Multiscale Air Quality Modelling System (CMAQ), to assess isoprene SOA formation on a larger scale.

Indoor functional plywood with electrothermal response, flame retardancy, and moisture-proof performance and enhanced surface temperature with nano-SiO2 film

ABSTRACT Innovative wood-based composites have attracted considerable interest because of their potential applications in multifunctional indoor wood products. Flame-retardant electrothermal plywood (FR-Eplywood) with excellent Joule heat, flame retardancy, and moisture-proof performance was fabricated via a cold pressing process using carbon fiber paper as a heating element. The results showed that the bonding strength of FR-Eplywood in the air-dried state was 2.07 MPa. The FR-Eplywood exhibited outstanding low-temperature radiation performance and temperature uniformity, and the maximum temperature was 40.2°C and 57.9°C at 24 V and 36 V, respectively. Meanwhile, the flame retardancy performance was also significantly improved owing to the peak of heat release rate, and the total smoke release was reduced by 47.4% and 60.7%, respectively. Furthermore, FR-Eplywood can accelerate the discharge of water under low voltage. When the voltage was maintained at 36 V during 400 min of heating, the moisture content decreased from 26.8% to 1.7%, indicating that FR-Eplywood could inhibit mildew in humid environments through temperature management. This study provides a promising thermal management strategy for functional indoor wood products.